www.clare.com
DS-LCB110-R08 1
LCB110
Single-Pole, Normally Closed
OptoMOS® Relay
RoHS
2002/95/EC e3
Pb
Part # Description
LCB110 6-Pin DIP (50/Tube)
LCB110S 6-Pin Surface Mount (50/Tube)
LCB110STR 6-Pin Surface Mount (1000/Reel)
* For other packaging options consult factory.
Parameter Ratings Units
Blocking Voltage 350 VP
Load Current 120 mA
Max On-Resistance 35
Applications
Features
Description
Ordering Information
Pin Configuration
Telecommunications
Telecom Switching
Tip/Ring Circuits
Modem Switching (Laptop, Notebook,
Pocket Size)
Hook Switch
Dial Pulsing
Ground Start
Ringing Injection
Instrumentation
Multiplexers
Data Acquisition
Electronic Switching
I/O Subsystems
Meters (Watt-Hour, Water, Gas)
Medical Equipment-Patient/Equipment Isolation
Security
Aerospace
Industrial Controls
3750Vrms Input/Output Isolation
Low Drive Power Requirements
(TTL/CMOS Compatible)
Arc-Free With No Snubbing Circuits
FCC Compatible
VDE Compatible
No EMI/RFI Generation
Small 6-Pin Package
Machine Insertable, Wave Solderable
Surface Mount Tape & Reel Version Available
The LCB110 is a single-pole, normally closed
(1-Form-B) relay that uses optically coupled MOSFET
technology to provide 3750Vrms of input to output
isolation. The efficient MOSFET switches and
photovoltaic die use Clare’s patented OptoMOS
architecture. A highly efficient GaAIAs infrared LED
controls the optically coupled output. The LCB110
has low on-resistance and is well suited for most
applications requiring a normally closed relay.
Approvals
Switching Characteristics
of Normally Closed Devices
Form-B
IF
10%
90%
ILOAD
ton
toff
UL Recognized Component: File E76270
CSA Certified Component: Certificate 1175739
EN/IEC 60950-1 Certified Component:
TUV Certificate B 09 07 49410 006
1
3
2
4
5
6
+ Control
– Control
N/C
Load
Do Not Use
Load
AC/DC Configuration
1
3
2
4
5
6
+ Control
– Control
+ Load
– Load
DC Only Configuration
N/C
www.clare.com
2R08
LCB110
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Absolute Maximum Ratings @ 25ºC
Parameter Ratings Units
Blocking Voltage 350 VP
Reverse Input Voltage 5 V
Input Control Current 50 mA
Peak (10ms) 1 A
Input Power Dissipation 1150 mW
Total Power Dissipation 2800 mW
Isolation voltage, Input to Output 3750 Vrms
Operational Temperature -40 to +85 °C
Storage Temperature -40 to +125 °C
1 Derate linearly 3.33 mW / ºC
1 Derate linearly 6.67 mW / ºC
Parameter Conditions Symbol Min Typ Max Units
Output Characteristics
Load Current Continuous
AC/DC Confi guration -I
L--
120 mA
DC Confi guration 200
Peak Load Current t=10ms IL- - 350 mA
On-Resistance
AC/DC Confi guration IL=120mA RON
-2335
DC Confi guration IL=200mA - 7 10
Off-State Leakage Current IF=5mA, VL=350VPILEAK --1A
Switching Speeds
Turn-On IF=5mA, VL=10V ton - 0.38 3 ms
Turn-Off toff - 0.93 3
Output Capacitance IF=5mA, VL=50V, f=1MHz COUT -25 -pF
Input Characteristics
Input Control Current IL=120mA IF--5mA
Input Dropout Current - IF0.4 0.7 - mA
Input Voltage Drop IF=5mA VF0.9 1.2 1.4 V
Reverse Input Current VR=5V IR--10A
Common Characteristics
Input to Output Capacitance - CI/O -3 -pF
Electrical Characteristics @ 25ºC
LCB110
www.clare.com 3
R08
PERFORMANCE DATA*
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please
contact our application department.
35
30
25
20
15
10
5
0
1.17 1.19 1.21 1.23 1.25
LED Forward Voltage Drop (V)
Device Count (N)
Typical LED Forward Voltage Drop
(N=50, IF=5mA, TA=25ºC)
0.25 0.39 0.530.32 0.46
Turn-On (ms)
Device Count (N)
25
20
15
10
5
0
0.18
Typical Turn-On Time
(N=50, IF=5mA, IL=120mADC, TA=25ºC)
0.80 0.90 1.050.75 0.85 0.95
Turn-Off (ms)
Device Count (N)
25
20
15
10
5
0
1.0
Typical Turn-Off Time
(N=50, IF=5mA, IL=120mADC, TA=25ºC)
0.45 0.55 0.65 0.750.50 0.60 0.70
LED Current (mA)
Device Count (N)
25
20
15
10
5
0
Typical IF for Switch Operation
(N=50, IL=120mADC, TA=25ºC)
25
20
15
10
5
0
0.40 0.50 0.60 0.700.45 0.55 0.65
LED Current (mA)
Device Count (N)
Typical IF for Switch Dropout
(N=50, IL=120mADC, TA=25ºC)
25
20
15
10
5
0
22.4 23.0 23.6 24.222.7 23.3 23.9
Device Count (N)
Typical On-Resistance Distribution
(N=50, IL=120mADC, TA=25ºC)
On-Resistance (:)
25
20
15
10
5
0
370 375 380 385 390 395
Blocking Voltage (VP)
Device Count (N)
Typical Blocking Voltage Distribution
(N=50, IF=5mA, TA=25ºC)
LED Forward Voltage Drop (V)
Typical LED Forward Voltage Drop
vs. Temperature
1.8
1.6
1.4
1.2
1.0
0.8
-40 -20 0 20 40 60 80 120100
I
F
=50mA
I
F
=10mA
I
F
=5mA
Temperature (ºC) LED Forward Current (mA)
Turn-On (ms)
05 1015202530354045
0.30
0.25
0.20
0.15
0.10
0.05
0
50
Typical Turn-On Time
vs. LED Forward Current
(IL=120mADC)
LED Forward Current (mA)
Turn-Off (ms)
05 1015202530354045
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
50
Typical Turn-Off Time
vs. LED Forward Current
(IL=120mADC)
www.clare.com
4R08
LCB110
PERFORMANCE DATA*
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please
contact our application department.
On-Resistance (:)
-40
60
50
40
30
20
10
0
-20 0 20 40 60 80 100
AC/DC Configuration
DC Configuration
Typical On-Resistance
vs. Temperature
(IL=120mADC)
Temperature (ºC)
Turn-On (ms)
-40
0.6
0.5
0.4
0.3
0.2
0.1
0
-20 0 20 40 60 80 100
Typical Turn-On vs. Temperature
(IF=5mA, IL=120mADC)
Temperature (ºC)
Turn-Off (ms)
-40
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
-20 0 20 40 60 80 100
IF=10mA
Typical Turn-Off vs. Temperature
(IL=120mADC)
Temperature (ºC)
IF=5mA
On-Resistance (:)
-40
50
45
40
35
30
25
20
15
10
5
0
-20 0 20 40 60 80 100
Instantaneous
Typical On-Resistance
vs. Temperature
(IL=100mA)
Temperature (ºC)
LED Current (mA)
-40
3.0
2.5
2.0
1.5
1.0
0.5
0
-20 0 20 40 60 80 100
Typical IF for Switch Operation
vs. Temperature
(IL=120mADC)
Temperature (ºC)
LED Current (mA)
-40
3.0
2.5
2.0
1.5
1.0
0.5
0
-20 0 20 40 60 80 100
Temperature (ºC)
Typical IF for Switch Dropout
vs. Temperature
(IL=120mADC)
Load Current (mA)
220
200
180
160
140
120
100
80
60
40
Temperature (ºC)
-40 -20 0 20 40 60 80 120100
DC Configuration
AC/DC Configuration
Typical Load Current
vs. Temperature
(IF=0mA)
Load Voltage (V)
Load Current (mA)
150
100
50
0
-50
-100
-150
-4 -3 -2 -1 1 2 3
04
Typical Load Current
vs. Load Voltage
(TA=25ºC)
Blocking Voltage (VP)
-40
400
395
390
385
380
375
370
365
-20 0 20 40 60 80 100
Temperature (ºC)
Typical Blocking Voltage
vs. Temperature
(IF=5mA)
Leakage (PA)
-40
0.045
0.040
0.035
0.030
0.025
0.020
0.015
0.010
0.005
0-20 0 20 40 60 80 100
Typical Leakage vs. Temperature
Measured Across Pins 4&6
(IF=5mA, VL=350V)
Temperature (ºC) Time
Load Current (A)
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
10Ps 1ms 100ms 10s100Ps 10ms 1s 100s
Energy Rating Curve
LCB110
www.clare.com 5
R08
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. Clare classified all
of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry
standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to
the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled
according to the limitations and information in that standard as well as to any limitations set forth in the information or
standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according
to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device Moisture Sensitivity Level (MSL) Rating
LCB110 / LCB110S MSL 1
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Reflow Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Device Maximum Temperature x Time
LCB110 / LCB110S 250ºC for 30 seconds
Board Wash
Clare recommends the use of no-clean flux formulations. However, board washing to remove flux residue is
acceptable. Since Clare employs the use of silicone coating as an optical waveguide in many of its optically isolated
products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes.
Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy
should not be used.
RoHS
2002/95/EC e3
Pb
www.clare.com
6R08
LCB110
MECHANICAL DIMENSIONS
Dimensions
mm
(inches)
PCB Hole Pattern
6.350 ± 0.127
(0.250 ± 0.005)
2.540 ± 0.127
(0.100 ± 0.005)
7.620 ± 0.127
(0.300 ± 0.005)
5.080 ± 0.127
(0.200 ± 0.005)
6 - 0.800 DIA.
(6 - 0.031 DIA.)
0.254 ± 0.0127
(0.010 ± 0.0005)
9.144 ± 0.508
(0.360 ± 0.020)
7.239 TYP
(0.285 TYP)
7.620 ± 0.254
(0.300 ± 0.010)
3.302 ± 0.051
(0.130 ± 0.002) 4.064 TYP
(0.160 TYP)
0.457 ± 0.076
(0.018 ± 0.003)
8.382 ± 0.381
(0.330 ± 0.015) 2.54 ± 0.127
(0.100 ± 0.005)
6.350 ± 0.127
(0.250 ± 0.005)
1.651 ± 0.254
(0.065 ± 0.010)
Dimensions
mm
(inches)
PCB Land Pattern
0.254 ± 0.0127
(0.010 ± 0.0005)
7.620 ± 0.254
(0.300 ± 0.010)
0.635 ± 0.127
(0.025 ± 0.005)
3.302 ± 0.051
(0.130 ± 0.002)
4.445 ± 0.254
(0.175 ± 0.010)
2.54
(0.10)
8.90
(0.3503)
1.65
(0.0649)
0.65
(0.0255)
8.382 ± 0.381
(0.330 ± 0.015) 2.54 ± 0.127
(0.100 ± 0.005)
9.524 ± 0.508
(0.375 ± 0.020) 6.350 ± 0.127
(0.250 ± 0.005)
0.457 ± 0.076
(0.018 ± 0.003)
1.651 ± 0.254
(0.065 ± 0.010)
1.651 ± 0.254
(0.065 ± 0.010)
LCB110
LCB110S
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of
Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability,
fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental
damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice.
Specification: DS-LCB110-R08
©Copyright 2011, Clare, Inc.
OptoMOS® is a registered trademark of Clare, Inc.
All rights reserved. Printed in USA.
8/25/2011
For additional information please visit our website at: www.clare.com
7
LCB110
MECHANICAL DIMENSIONS (Cont.)
NOTES:
1. All dimensions carry tolerances of EIA Standard 481-2
2. The tape complies with all “Notes” for constant dimensions listed on page 5 of EIA-481-2
Dimensions
mm
(inches)
Embossment
Embossed
Carrier
330.2 Dia
(13.00 Dia)
Top Cover
Tape Thickness
0.102 Max
(0.004 Max)
W=16.00
(0.63)
B0 = 10.10
(0.398)
A0 = 10.10
(0.398)
P = 12.00
(0.472)
K1 = 3.80
(0.15)
K0 = 4.90
(0.19)
User Direction of Feed
LCB110S Tape & Reel