SPEC NO: DSAH3798 REV NO: V.5 DATE: OCT/12/2010 PAGE: 1 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou ERP: 1203004401
3.2x1.6mm SMD CHIP LED LAMP
Part Number: APTL3216SURCK Hyper Red
Features
z3.2mmx1.6mm SMT LED, 1.1mm thickness.
zLow power consumption.
zIdeal for backlight and indicator.
zVarious colors and lens types available.
zPackage : 2000pcs / reel.
zMoisture sensitivity level : level 3.
zRoHS compliant.
Description
The Hyper Red source color devices are made with Al-
GaInP on GaAs substrate Light Emitting Diode.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3.The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4.The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAH3798 REV NO: V.5 DATE: OCT/12/2010 PAGE: 2 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou ERP: 1203004401
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
V
iewing
Angle [1]
Min. Typ. 2θ1/2
APTL3216SURCK Hyper Red (AlGaInP) Water Clear 380 550 70°
Iv (mcd) [2]
@ 20mA
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Hyper Red 650 nm IF=20mA
λD [1] Dominant Wavelength Hyper Red 630 nm IF=20mA
Δλ1/2 Spectral Line Half-width Hyper Red 28 nm IF=20mA
C Capacitance Hyper Red 35 pF VF=0V;f=1MHz
VF [2] Forward Voltage Hyper Red 1.95 2.5 V IF=20mA
IR Reverse Current Hyper Red 10 uA VR=5V
Parameter Hyper Red Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 185 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
SPEC NO: DSAH3798 REV NO: V.5 DATE: OCT/12/2010 PAGE: 3 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou ERP: 1203004401
Hyper Red APTL3216SURCK
SPEC NO: DSAH3798 REV NO: V.5 DATE: OCT/12/2010 PAGE: 4 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou ERP: 1203004401
APTL3216SURCK
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Dimensions
(Units : mm)
SPEC NO: DSAH3798 REV NO: V.5 DATE: OCT/12/2010 PAGE: 5 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou ERP: 1203004401
PACKING & LABEL SPECIFICATIONS APTL3216SURCK
