PROGRAMMABLE LOGIC PRODUCTS
CPLD Programming Cable
◆ 5V, 3.3V and 1.8V ISP Cable for
PC Parallel Port
Logic Doubling CPLDs
◆ ATF1502BE-7AU44, 1.8V,
32 Macrocell CPLD with ISP
◆ ATF1504ASV-15AU44, 3.3V,
64 Macrocell CPLD with ISP
ATF15XX-DK3 CPLD DEVELOPMENT KIT
LOGIC DOUBLING®
The ATF15xx-DK3 is a third-generation low-cost development/programmer kit for the designer
who wishes to begin working with Atmel's ATF15xx family of industry-standard pin-compatible
Complex Programmable Logic Devices (CPLDs) with Logic Doubling. Like the ATF15xx-DK2,
the ATF15xx-DK3 allows designers to design, synthesize, simulate, program and evaluate
their designs using either the free Atmel WinCUPL software or an evaluation version of Atmel's
ProChip Designer®
as well as the included 44-lead TQFP package adapter.
The leading-edge synthesis and simulation software from Mentor Graphics® and Altium® are
included in the ProChip Designer tool. The kit can be extended to be used to program all the
different packages of the ATF15xx family by simply adding the package adapter options.
Once the design is completed, the designer can install a sample ATF15xx family device in the
provided PCB and program it using the built-in In-System Programmable (ISP) industry-standard
4-pin JTAG interface, the ATMISP software, and the provided PC parallel port cable. The included
tutorial takes the designer through the complete CPLD development process. All the software
runs on Windows®
platforms. LEDs, switches, and expansion headers for all pins are provided
to allow comprehensive prototyping and evaluation. The ATF15xx-DK3, includes everything a
designer needs to get started with the Atmel Logic Doubling CPLDs.
CPLD Demo/Programmer Board
◆ 44-lead TQFP Adapter
◆ ISP (JTAG) Port
◆ Expansion Headers
◆ 2 MHz Crystal Oscillator
◆ Four 7-segment LED Displays
◆ Eight Individual LEDs
◆ V
CC Operation: 1.8V, 3.3V and 5.0V
◆ Easy Access to CPLD I/O Pins
◆ Global Clear, Output Enable, I/O and
Power Switches
Atmel Corporation
2325 Orchard Parkway
San Jose, CA 95131, USA
Tel: 1(408) 441-0311
Fax: 1(408) 487-2600
Regional Headquarters
Europe
Atmel Sarl
Route des Arsenaux 41
Case Postale 80
CH-1705 Fribourg, Switzerland
Tel: (41) 26-426-5555
Fax: (41) 26-426-5500
Asia
Room 1219
Chinachem Golden Plaza
77 Mody Road Tsimshatsui
East Kowloon, Hong Kong
Tel: (852) 2721-9778
Fax: (852) 2722-1369
Japan
9F, Tonetsu Shinkawa Bldg.
1-24-8 Shinkawa
Chuo-ku, Tokyo 104-0033, Japan
Tel: (81) 3-3523-3551
Fax: (81) 3-3523-7581
Product Contact
Programmable Logic Products
2325 Orchard Parkway
San Jose, CA 95131, USA
Tel: 1(408) 441-0311
Fax: 1(408) 487-2600
www.atmel.com/products/PLD
Literature Requests
www.atmel.com/literature
Disclaimer: The information in this document is
provided in connection with Atmel products. No license,
express or implied, by estoppel or otherwise, to any
intellectual property right is granted by this document or
in connection with the sale of Atmel products. EXCEPT
AS SET FORTH IN ATMEL’S TERMS AND CONDI-
TIONS OF SALE LOCATED ON ATMEL’S WEB SITE,
ATMEL ASSUMES NO LIABILITY WHATSOEVER AND
DISCLAIMS ANY EXPRESS, IMPLIED OR STATU-
TORY WARRANTY RELATING TO ITS PRODUCTS
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTY OF MERCHANTABILITY, FITNESS FOR
A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY
DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE,
SPECIAL OR INCIDENTAL DAMAGES (INCLUDING,
WITHOUT LIMITATION, DAMAGES FOR LOSS OF
PROFITS, BUSINESS INTERRUPTION, OR LOSS OF
INFORMATION) ARISING OUT OF THE USE OR IN-
ABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. Atmel makes no representations or warran-
ties with respect to the accuracy or completeness of the
contents of this document and reserves the right to make
changes to specifi cations and product descriptions at any
time without notice. Atmel does not make any commit-
ment to update the information contained herein. Unless
specifi cally provided otherwise, Atmel products are not
suitable for, and shall not be used in, automotive applica-
tions. Atmel’s products are not intended, authorized, or
warranted for use as components in applications intended
to support or sustain life.
©Atmel Corporation 2006. All rights reserved. Atmel®,
logo and combinations thereof, Everywhere You Are®,
ProChip Designer®, Logic Doubling® and others, are
registered trademarks or trademarks of Atmel Corporation
or its subsidiaries. Windows® and others are registered
trademarks or trademarks of Microsoft Corporation.
Mentor Graphics®, ModelSIM® and others are registered
trademarks or trademarks of Mentor Graphics Corporation
or its subsidiaries in US and/or other countries. Other terms
and product names may be trademarks of others.
3611A−PLD−01/06
ATF15XX-DK3 EPLD SOFTWARE MATRIXATMEL
Ordering Information
Ordering Code Description Price (USD)
ATF15xx-DK3 Development/Programming Kit $99
ATF15xx-DK3-SAA44 44-lead TQFP Package Adapter Included in DK3 Kit
ATF15xx-DK3-SAJ44 44-lead PLCC Package Adapter $35
ATF15xx-DK3-SAJ84 84-lead PLCC Package Adapter $35
ATF15xx-DK3-SAA100 100-lead TQFP Package Adapter $135
ATF15xx-DK3-SAA144 144-lead TQFP Package Adapter $149
VHDL®✓
Verilog®✓
CUPL®✓✓
Schematic ✓
Mentor Graphics Precision Synthesis(1)
VHDL Synthesis ✓
Verilog Synthesis ✓
Altium PeakFPGA™(2)
VHDL Synthesis ✓
Altium Design Explorer 99SE(2)
Schematic ✓
CUPL ✓
ModelSIM®(1)
VHDL Simulation ✓
Verilog Simulation ✓
Altium PeakSIM(2)
VHDL Simulation ✓
Atmel's Fitters with Logic Doubling ✓✓
CPLD Devices
ATF15xxAS/ASL ✓✓
ATF15xxASV/ASVL ✓✓
ATF15xxBE ✓✓
ATF1500A/AL ✓
ATF2500C ✓
SPLD Devices ✓
Design Entry
ProChip Designer
Evaluation Atmel WinCupl
SynthesisSimulation
Fitters & Devices
Notes: 1. The evaluation period for Mentor Graphics Precision Synthesis and ModelSIM is six months.
2. The evaluation period for Altium tools is 30 days.
