8ST Series VG96912 & JN1003 Connection Technologies 8ST Series VG96912 & JN1003 Contents Overview * 8ST Series - Presentation ............................................... 06 * 8ST Series - Applications ............................................... 06 * A universal product platform ........................................ 07 * Contact layouts ................................................................. 08 * Contact layouts (matrix) ................................................... 12 * Cross reference list ........................................................... 14 Standard Version * Technical features ............................................................. * Ordering information ....................................................... * Dimensions ......................................................................... * Panel cut-out ...................................................................... * Mated/unmated dimensions ......................................... * Receptacle with straight PC tail contacts .................. * Dummy contacts ............................................................... * Filler plugs .......................................................................... * Wiring instructions ............................................................ * Crimping tools ................................................................... * Insertion & extraction tools ........................................... * Backshell tightening tools .............................................. * Tightening support ........................................................... * Slackening tools ................................................................ 32 32 33 34 35 35 35 35 Common Section 18 19 21 24 24 25 * Backshells ........................................................................... * Protective caps .................................................................. * Dummy receptacles ........................................................ * Panel gasket ....................................................................... * Reductors ............................................................................ * Boots .................................................................................... * Orientations ........................................................................ * Coordinates information ................................................. 38 39 40 40 41 41 41 42 Contacts & Tooling * Straight PC tail contacts .................................................. * Crimp contacts .................................................................. * Coaxial contacts #12 ....................................................... * Solder cup .......................................................................... * Quadrax #8 contacts ...................................................... * Wire wrap contacts .......................................................... * Thermocouple contacts ................................................. 28 29 30 30 30 31 31 Range Extension * 8STA Series & 8STA derived Series ............................ * 847/848 Series ................................................................. * VGE1 Series ....................................................................... * micro38999 ....................................................................... * 851 Series .......................................................................... (c) 2012 - SOURIAU 52 53 53 54 54 3 8ST Series Overview 8ST Series - Presentation ............................................................................................................... 06 8ST Series - Applications ............................................................................................................... 06 A universal product platform: MIL-DTL-38999 ...................................................................... 07 Contact layouts ................................................................................................................................. 08 Contact layouts (matrix) .................................................................................................................. 12 Cross reference list .......................................................................................................................... 14 8ST Series VG96912 & JN1003 8ST Series - Presentation VG96912 & JN1003 Derived from MIL-C-38999 Series I and II and incorporates lightweight, scoop proof and high contact density features. The design, performance and mechanical robustness of this product meet the requirements of the following applications: * Military, aerospace, * Ballistic missiles and weapon systems, * Marine equipment. 8ST connector features include: * A very high contact density, * MIL-DTL-38999 Series I contact layouts, * The male contacts are recessed into the body to prevent damage by mismating (100% scoop proof), * Keyway polarization (master keyway), * RFI-EMI shielding and shell to shell continuity, * Receptacle fixings and backshells as per pattern 602 and MIL-C-26482 Series II. The plug and receptacle bodies, as the endbells, are manufactured from aluminum alloy and protected by cadmium or nickel plating. The shells are locked together by a bayonet coupling mechanism. Gold plated crimp or straight PC tail contacts are extracted from connector rear and are retained in the insulator by a metal clip. 8ST Series - Applications * Civil and Military Aerospace * Marine Equipments * Communications Equipements * Medical Instrumentation * Ballistic Missiles & Weapon Systems * Armored Carriers & Tanks * Test Equipments 6 (c) 2012 - SOURIAU 8ST Series VG96912 & JN1003 A universal product platform: MIL-DTL-38999 38999 Series I: 8LT Series High density (#22D) MIL-spec circular Scoop proof Coupling system: Bayonet Method of mounting: screws or jam nut Shell: Aluminum alloy Plating: olive green cadmium, black zinc nickel or nickel QPL approved Numerous layouts 38999 Series II: 8T Series Short version of MIL-DTL-38999 Series I Low profile = lightweight High density MIL-spec circular (1980's) Non-scoop proof, bayonet coupling Method of mounting: screws or jam nut Shell: Aluminum alloy Plating: cadmium, nickel, hard anodized QPL approved Numerous layouts 38999 Series III: 8D Series High density MIL-spec circular (1980's) Scoop proof, fast screw coupling Composite light-weight version available QPL approved Titanium version, light-weight, mechanical and environnemental performances Quadrax and Elio version Specific versions (clinch nuts, double flange, high power, hermetic, ...) (c) 2012 - SOURIAU 7 8ST Series VG96912 & JN1003 Contact layouts 08 12 HD 12#26 Service R 35 6#22D Service M 98 3#20 Service I Contact #26 & #22D Contact #8 Contact #20 Contact #8 Power Contact #16 Contact #8 Quadrax Contact #12 Contact #4 Power Contact #10 10 26 HD 01 02 04 05 1#12 Service II 2#16 Service I 4#20 Service I 5#20 Service I 26#26 Service R 98 99 6#20 Service I 7#20 Service I 35 80 81 13#22D Service M 1#8 Triax Service I 1#8 Quadrax 12 03 04 08 26 35 3#16 Service I 4#16 Service I 8#20 Service I 2#12 6#22D Service M 22#22D Service M Ethernet Quadrax HD High Density layout 8 (c) 2012 - SOURIAU 43 HD 43#26 Service R 98 10#20 Service I 8ST Series VG96912 & JN1003 Contact layouts 14 05 15 18 19 35 97 5#16 Service II 1#16 14#20 Service I 18#20 Service I 19#20 Service I 37#22D Service M 4#16 8#20 Service I 02 06* 08 20* 22 26 35 75 38#22D 1#8 Triax Service M 6#12 Service I 8#16 Service II 4#12 16#22D Service M 2#12 2#8 Triax Service M 26#20 Service I 55#22D Service M 2#8 Triax Service M 80 81 82 99 2#12 2#8 Quadrax 38#22D 1#8 Quadrax 2#8 Quadrax 2#16 21#20 Service I 16 18 11 18 28 32 35 84 11#16 Service II 14#22D 4#8 Triax Service M 26#20 2#16 Service I 32#20 Service I 66#22D Service M 14#22D 4#8 Quadrax Ethernet Quadrax * Available on specific request. Please consult us. (c) 2012 - SOURIAU 9 8ST Series VG96912 & JN1003 Contact layouts 20 11 16 35 39 41 42 48 72 11#12 Service I 16#16 Service II 79#22D Service M 2#16 37#20 Service I 41#20 Service I 2#4 Power Service I 4#8 Power Service I 2#4 Power 6#16 Service I 75 77 78 84 4#8 Triax Service M 17#22D 2#8 Triax Service M 17#22D 2#8 Quadrax 4#8 Quadrax 22 21 32 35 53 54 55 21#16 Service II 32#20 Service I 100#22D Service M 53#20 Service I 4#12, 9#16 40#22D Service M 55#20 Service I Ethernet Quadrax 10 (c) 2012 - SOURIAU 8ST Series VG96912 & JN1003 Contact layouts 24 04 07 08* 19 24 29 35 37 8#16 48#20 Service I 2#8 Triax 97#22D Service M 8#8 Triax Service M 19#12 Service I 12#16 12#12 Service I 29#16 Service I 128#22D Service M 37#16 Service I 41 43 44 46 61 81 82 86 22#22D, 3#20 11#16, 2#12 3#8 Triax Service M 23#20 20#16 Service I 4#4 Power 4#16 Service I 40#20, 4#16 2#8 Coax Service I 61#20 Service I 22#22D 3#20, 11#16 2#12 3#8 Quadrax 97#22D 2#8 Quadrax 40#20 4#16 2#8 Quadrax 90 40#20, 4#16 2#8 Twinax Service I Ethernet Quadrax * Available on specific request. Please consult us. (c) 2012 - SOURIAU 11 8ST Series VG96912 & JN1003 Contact layouts (matrix) Shell Size Layout 08 08-98 I 10-01 II 10-02 I 10-04 I 10-05 I 10-26 R 10 Service 8ST 08-12 R 08-35 M 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 10-35 M 10-80 I 10-81 - 10-98 I 10-99 I 12-01 12 14 16 18 12-03 I 12-04 I 12-08 I 12-26 M 12-35 M 12-43 R 12-98 I 14-05 II 14-15 I 14-18 I 14-19 I 14-35 M 14-97 I 16-02 M 16-06 I 16-08 II 16-20 M 16-22 M 16-26 I 16-35 M 16-75 M 16-80 - 16-81 - 16-82 - 16-99 I 18-11 II 18-18 M 18-28 I 18-32 I 18-35 M 18-84 - 3 Souriau's layout Q Qualified layout according corresponding norm #8 Qdx: Quadrax 12 (c) 2012 - SOURIAU VG96912 Q JN1003 Nber of Contacts #26 12 12 8ST2*034 Other P/N Q Q 6 Q Q 3 #22D #20 #16 1 2 4 4 5 Q Q Q 13 Q 1 5 26 13 1 Triax 1 Q Q Q Q 1 Qdx 6 6 7 7 3 3 4 4 8 6 22 Q Q 22 Q Q Q 10 43 Q 8 8 Q 2 43 10 5 14 18 18 Q Q 19 Q Q Q 37 Q Q Q Q Q Q 19 8 4 38 6 1 Triax 6 8 20 1 37 12 39 Q 5 15 Q 8 16 4 4 Q Q Q Q 26 Q 55 2 55 2 Triax 4 2 38 2 Qdx 23 Q Q 21 11 18 Q Q 2 11 14 28 Q 2 Qdx 1 Qdx 2 Q 2 Triax 26 2 39 #8 3 2 26 #10 6 1 Q #12 4 Triax 26 Q 32 Q 66 66 18 14 2 32 4 Qdx #4 Power 8ST Series VG96912 & JN1003 Contact layouts (matrix) Shell Size 20 22 24 Layout Service 8ST 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 20-11 I 20-16 II 20-35 M 20-39 I 20-41 I 20-42 I 20-48 I 20-72 I 20-75 - 20-77 M 20-78 - 20-84 - 22-21 II 22-32 I 22-35 M 22-53 I 22-54 M 22-55 I 24-04 I 24-07 M 24-08 - 24-19 I 24-24 II 24-29 I 24-35 M 24-37 I 24-41 N 24-43 I 24-44 I 24-46 I 24-61 I 24-81 N 24-82 M 24-86 I 24-90 I 3 Souriau's layout Q Qualified layout according corresponding norm #8 Pow: Power; Qdx: Quadrax VG96912 JN1003 Nber of Contacts 8ST2*034 Other P/N Q 11 Q Q Q 16 Q Q Q Q Q 79 #26 #22D #20 #16 #12 #10 #8 11 16 79 39 37 41 41 2 2 2 4 4 Pow 8 Q 6 2 4 4 Triax 19 17 2 Triax 19 17 2 Qdx 4 Q Q 21 Q 100 4 Qdx 21 32 Q Q Q 32 100 53 53 53 40 55 9 4 55 56 99 48 8 97 2 Triax 8 Q Q Q Q Q 8 Triax 19 19 24 12 29 29 128 37 22 43 3 11 23 20 8 Q 2 3 Triax 4 46 Q 12 128 37 41 #4 Power 40 61 4 4 2 Coax 61 41 22 99 97 3 11 2 3 Qdx 46 40 4 2 Qdx 46 40 4 2 Triax 2 Qdx (c) 2012 - SOURIAU 13 8ST Series VG96912 & JN1003 Cross reference list Connectors VG: approval n307/84 Pr EN3372 JN1003: full qualification under process. SOURIAU VG96912 EN3372* JN1003 (EFA)* Designation 8ST0**G**P/SN 8ST0**F/B**P/SN 8ST0**B**P/SN034 8ST0**B**A/BN034 VG96912A****P/SN - EN3372F/W0**N**P/SN - JN1003B****P/SN1 JN1003B****P/SN Square flange receptacle 8ST1**F/G**P/SN - - - In line receptacle 8ST2**B**P/SN034 8ST2**F**A/BN034 - - JN1003H****P/SN1 JN1003H****P/SN Mounting box receptacle 8ST5**G**P/SN 8ST5**F/B**P/SN 8ST5**B**P/SN034 8ST5**B**A/BN034 VG96912D****P/SN - EN3372F/W6**N**P/SN - JN1003FG****P/SN1 JN1003FG****P/SN Plug with EMI/RFI shielding 8ST6**G**P/SN 8ST6**F/B**P/SN VG96912E****P/SN - - - Plug without EMI/RFI shielding 8ST7**G**P/SN 8ST7**F/B**P/SN 8ST7**B**P/SN034 8ST7**F/B**A/BN034 VG96912B****P/SN - EN3372F/W7**N**P/SN - JN1003A****P/SN1 JN1003A****P/SN Jam nut receptacle Contacts * Please consult us, our product will be evaluated against the final drafts/standards when available. SOURIAU VG96912 EN3372* JN1003 (EFA)* Designation 8599-0702 JJ 8599-0703 SA 8599-0704 MJ 8599-0705 MJ VG96912P22 D VG96912P20 VG96912P16 VG96912P12 Separate EN standard in progress - Crimp male contact #22D Crimp male contact #20 Crimp male contact #16 Crimp male contact #12 8599-0706 900 8599-0707-900 8599-0708-900 8599-0709-900 VG96912S22D1 VG96912S201 VG96912S161 VG96912S121 Separate EN standard in progress - Crimp female contact #22D Crimp female contact #20 Crimp female contact #16 Crimp female contact #12 M39029/58-360 M39029/58-363 M39029/58-364 M39029/58-365 - - JN1003P22D JN1003P20 JN1003P16 JN1003P12 Crimp male contact #22D Crimp male contact #20 Crimp male contact #16 Crimp male contact #12 M39029/58-348 M39029/58-351 M39029/58-352 M39029/58-353 - - JN1003S22D JN1003S20 JN1003S16 JN1003S12 Crimp female contact #22D Crimp female contact #20 Crimp female contact #16 Crimp female contact #12 * Please consult us, our product will be evaluated against the final drafts/standards when available. 14 (c) 2012 - SOURIAU 8ST Series VG96912 & JN1003 Cross reference list Backshells VG: approval n307/84 Pr EN3372 JN1003: full qualification under process. SOURIAU VG96912 EN 3372* 8LST101B52 (shell size 08) 8LST102B52 (shell size 10) 8LST103B52 (shell size 12) 8LST104B52 (shell size 14) 8LST105B52 (shell size 16) 8LST106B52 (shell size 18) 8LST107B52 (shell size 20) 8LST108B52 (shell size 22) 8LST109B52 (shell size 24) VG96912G110 VG96912G112 VG96912G114 VG96912G116 VG96912G118 VG96912G120 VG96912G122 VG96912G124 Separate EN standard in progress Straight endbell cable clamp 8LST101B57 (shell size 08) VG96912L110 VG96912L112 VG96912L114 VG96912L116 VG96912L118 VG96912L120 VG96912L122 VG96912L124 Separate EN standard in progress Endbell for shielding braids 8LST102B57 (shell size 10) 8LST103B57 (shell size 12) 8LST104B57 (shell size 14) 8LST105B57 (shell size 16) 8LST106B57 (shell size 18) 8LST107B57 (shell size 20) 8LST108B57 (shell size 22) 8LST109B52 (shell size 24) JN1003 (EFA)* Designation * Please consult us, our product will be evaluated against the final drafts/standards when available. (c) 2012 - SOURIAU 15 8ST Series Standard Version Technical features ............................................................................................................................ 18 Ordering information ....................................................................................................................... 19 Dimensions ........................................................................................................................................ 21 Panel cut-out ...................................................................................................................................... 24 Mated/unmated dimensions ......................................................................................................... 24 Receptacle with straight PC tail contacts .................................................................................. 25 8ST Series VG96912 & JN1003 Description * A high density connector from 1 to 128 contacts for all military and aeronautical purposes. * Contact sizes #22D, #20, #16, #12, #16 coax, #8 triax, #8 and #4 power * Bayonet locking system * MIL-DTL-38999 Series I contact layouts * 100% scoop proof * EMI/RFI shielding and shell-to-shell continuity * Standards: JN 1003, VG 96912, pr EN 3372, EFA J 62-017 Technical features Mechanical * Shell: aluminum alloy * Plating: . black zinc nickel (Z) . olive green cadmium (G) . olive green cadmium, spec. 034 500 hours salt spray (B) . nickel (F) * Insulator: thermoplastic or metallic version available for specification 284 & 384 * Grommet or seal: liquid silicone rubber or fluorocarbone elastomer for specification 022 * Test voltage (Vrms) * Temperature range: . black zinc nickel plating (Z) - 65C +175C . olive green cadmium plating (B or G) - 65C +175C . nickel plating (F) - 65C +200C Service R M N I II sea level 400 1 300 1 000 1 800 2 300 at 21000 m N/A 800 600 1 000 1 000 * Insulation resistance: 5 000 MW at 500 VAC * Contact resistance: 8 4 Resistance m 16 14.6 7.3 3.8 3.5 3 Contacts size 2 Contacts size * Plating contact: gold over nickel Rating (A) * Endurance: 500 mating/unmating operations * Shock: 300 g during 3 ms and as per MIL S 901 grade A * Vibration: 147 m/s, 10 to 2000 Hz 26 22 20 16 12 22 20 16 12 Min force in N 45 67 111 111 110 200 (c) 2012 - SOURIAU 8 26 22 20 16 12 3 5 8 4 7.5 13 23 45 80 * Shell continuity: . black zinc nickel: 2.5 m . olive green plating: 2.5 m . nickel plating: 1 m * Shielding: 70 db at 0.01 to 100 MHz * Contact retention (min force in N): 18 Climatic * Sealing, mated connectors: Differential pressure 2 bars leakage 16 cm3/h * Salt spray as per: . MIL STD 1344 method 1001: - 500 hours (plating B, G and Z) - 48 hours (plating F) . NFC 93422 : - 48 hours (plating F) * Contact rating: * Contact: copper alloy Contacts size Electrical 4 * Electrical continuity between contact and shell for specification 284 & 384: 10 m max * Resistance to fluids . As per MIL-DTL-38999: MIL-L-7808, MIL-L-23699, MIL-H-5606, MIL-A-8243, MIL-C-25769, MIL-T-5624 (JP5), hydraulic fluids, solvants . Specification 022 for fuel immersion (please consult us) 8ST Series VG96912 & JN1003 Ordering information SOURIAU part numbers Basic series 8ST 0 - 10 G 35 P N Shell style 0: Square flange receptacle 1: In line receptacle 2: Square flange receptacle, not accepting backshell 3: Square flange receptacle, rear mounting 5: Plug with RFI/EMI shielding 6: Plug without RFI/EMI shielding 7: Jam nut receptacle Type -: Connector with standard crimp contacts L: Connector with long PC tail contacts M: Connector with medium PC tail contacts C: Connector with short PC tail contacts Shell size 08; 10; 12; 14; 16; 18; 20; 22; 24 Plating Z: Black zinc nickel F: Nickel G: Olive green cadmium B: Olive green cadmium - spec. 034 mandatory, see specification below Contact layout See pages 8 to 13 Contact type P: Pin S: Socket A: Connector supplied without pin contact B: Connector supplied without socket contact Orientation N, A, B, C, D - See page 41; Orientations B & C not developped for shell size number 8 Specifications None: Supplied with contact 034: As per JN1003 Standard - B type plating only, 500 hours salt spray 046: PC Tail contact with tinned plating 251: Connector provided with #8 power contacts instead of #8 triax contacts 022: Fuel tank - Please consult us (c) 2012 - SOURIAU 19 8ST Series VG96912 & JN1003 Ordering information JN1003 part numbers Basic series JN1003 B 12 - 35 P N 1 10 - 35 P N Shell style A: Jam nut receptacle B: Square flange receptacle FG: Plug with RFI/EMI shielding H: Square flange receptacle, not accepting backshell Shell size 08; 10; 12; 14; 16; 18; 20; 22; 24 Plating -: Olive green cadmium Contact layout See pages 8 to 13 Contact type P: Pin S: Socket Orientation N, A, B, C, D - See page 41; Orientations B & C not developped for shell size number 8 Specification None: Delivered without contact - crimp version 1: Delivered with crimp contacts 101: Short PC tail contacts (#22D, #20, #16 male & female for receptacle type A and B) 102: Medium PC tail contacts (#22D male for receptacle B ; #22D and #20 female for receptacle type A) 103: Long PC tail contacts (#22D male & female for receptacle type B) 104: Short PC tail contacts HE308 type (#22D male & female for receptacle type B) VG96912 part numbers Basic series Shell type A: Square flange receptacle AA: Square flange receptacle, rear mounting B: Jam nut receptacle D: Plug with RFI/EMI shielding E: Plug without RFI/EMI shielding Shell size 08; 10; 12; 14; 16; 18; 20; 22; 24 Plating -: Olive green cadmium Contact layout See pages 8 to 13 Contact type P: Pin S: Socket Orientation N, A, B, C, D - See page 41; Orientations B & C not developped for shell size number 8 20 (c) 2012 - SOURIAU VG96912 D 8ST Series VG96912 & JN1003 Dimensions Types 5 & 6 - Plug 32 Max. OA Thread Shell size A 08 19 7/16-28 UNEF 2A 10 22 9/16-24 UNEF 2A 12 26 11/16-24 UNEF 2A 14 29 13/16-20 UNEF 2A 16 33 15/16-20 UNEF 2A 18 36 1''1/16-18 UNEF 2A 20 39 1''3/16-18 UNEF 2A 22 44 1''5/16-18 UNEF 2A 24 46 1''7/16-18 UNEF 2A Thread Type 7 - Jam nut receptacle E 9.86 Max. A 23.240.13 C Shell size A +0 -0.2 B B Thread F OD C Thread OD E 0.3 F 0.4 Tightening torque for JN1003 (mN) 08 13.46 9/16-24 UNEF 2A 27.3 23.8 19.1 4 10 16.64 11/16-24 UNEF 2A 30.5 27.0 22.2 6 12 20.78 14 23.93 16 27.08 18 30.25 20 33.43 22 36.60 24 39.78 2.43 / 3.09 1.6 / 3.2 3.23 / 3.89 13/16-20 UNEF 2A 35.3 31.8 27.0 9 15/16-20 UNEF 2A 38.4 34.9 30.2 10 1''1/16-18 UNEF 2A 41.6 38.1 33.3 13 1''3/16-18 UNEF 2A 44.8 41.3 36.5 20 1''5/16-18 UNEF 2A 49.6 46.0 39.7 23 1''7/16-18 UNEF 2A 52.7 49.2 42.7 25 1''7/16-18 UNEF 2A 55.9 52.4 46.0 26 Note: All dimensions are in millimeters (mm) (c) 2012 - SOURIAU 21 8ST Series VG96912 & JN1003 Type 0 - Square flange receptacle E F Thread C A Shell size OD B A +0 -0.2 B Min. C Thread OD 0.13 E 0.4 F 0.1 08 7/16-28 UNEF 2A 20.6 15.1 10 9/16-24 UNEF 2A 23.8 18.3 11/16-24 UNEF 2A 26.2 20.6 13/16-20 UNEF 2A 28.6 23.0 31.0 24.6 12 2.16 / 2.42 16.05 14 16 3.05 15/16-20 UNEF 2A 11.8 18 1''1/16-18 UNEF 2A 33.3 27.0 20 1''3/16-18 UNEF 2A 36.5 29.4 22 2.92 / 3.18 15.29 24 1''5/16-18 UNEF 2A 1''7/16-18 UNEF 2A 3.73 39.7 31.8 42.9 34.9 Type 1 - In line receptacle E Thread A C Shell size OD B A +0 -0.2 B Min. C 7/16-28 UNEF 2A 7.45 14.2 9/16-24 UNEF 2A 10.7 18.5 11/16-24 UNEF 2A 13.6 21.8 13/16-20 UNEF 2A 16.75 25.2 15/16-20 UNEF 2A 19.95 27.4 1''1/16-18 UNEF 2A 22.2 31.0 1''3/16-18 UNEF 2A 25.35 34.2 1''5/16-18 UNEF 2A 28.55 37.6 1''7/16-18 UNEF 2A 31.7 41.6 14 2.16 / 2.42 16.05 11.8 18 20 22 24 (c) 2012 - SOURIAU E 0.4 10 16 22 OD 0.1 08 12 Note: All dimensions are in millimeters (mm) Thread 15.29 2.92 / 3.18 8ST Series VG96912 & JN1003 Type 2 - Square flange receptacle (not accepting backshell) E F OD C A B Shell size A +0 -0.2 B Min. C OD 0.13 E 0.4 F 0.1 08 20.6 15.1 10 23.8 18.3 26.2 20.6 12 16.05 14 11.2 2.16 / 2.42 16 3.05 28.6 23.0 31.0 24.6 18 33.3 27.0 20 36.5 29.4 22 12.0 15.29 24 13.0 2.92 / 3.18 3.73 39.7 31.8 42.9 34.9 Type 3 - Square flange receptacle (rear mounting) Thread A Shell size C A +0 -0.2 E F OD B B Min. C Thread OD 0.13 E 0.4 F 0.1 08 7/16-28 UNEF 2A 20.6 15.1 10 9/16-24 UNEF 2A 23.8 18.3 12 11/16-24 UNEF 2A 26.2 20.6 14 16 21.84 13.5 18 2.16 / 2.42 13/16-20 UNEF 2A 15/16-20 UNEF 2A 3.05 28.6 23.0 31.0 24.6 1''1/16-18 UNEF 2A 33.3 27.0 20 1''3/16-18 UNEF 2A 36.5 29.4 22 1''5/16-18 UNEF 2A 39.7 31.8 42.9 34.9 24 25.4 12.3 1''7/16-18 UNEF 2A 3.73 Note: All dimensions are in millimeters (mm) (c) 2012 - SOURIAU 23 8ST Series VG96912 & JN1003 Panel cut-out Types 0, 2 & 3 Types 0, 2 & 3 Shell size B OA OC B Type 7 E OD OA Type 7 +0.25 -0 Back panel Front panel mounting mounting B OC +0.25 -0 OD +0.25 -0 08 14 12.7 15.1 14.5 13.6 10 17 16 18.3 17.7 16.8 12 22 19 20.6 22.7 20.9 14 25 22.2 23.0 25.7 24.1 16 28 25.5 24.6 18 31 28.5 20 34.5 22 37.5 24 41 3.5 28.8 27.2 27.0 32.0 30.4 31.7 29.4 35.1 33.6 35 31.8 38.4 36.8 38 34.9 41.5 39.9 4 Mated/unmated dimensions Types 8ST5 & 8ST6 with types 8ST0/8ST1/8ST2 Types 8ST5 & 8ST6 with type 8ST3 Types 8ST5 & 8ST6 with type 8ST7 A A A B B Shell size A Max. B Max. 31.93 46.99 B C Max. D Max. 37.72 52.78 41.28 56.34 E Max. F Max. 39.24 54.30 08 10 12 14 16 18 20 22 24 Note: All dimensions are in millimeters (mm) 24 (c) 2012 - SOURIAU E +0.25 -0 31.17 46.23 8ST Series VG96912 & JN1003 Receptacle with straight PC tail contacts B Contact style Size L OA #22D / #20 OA Max. 8ST0 C L OA L #22D B D OA 8ST7 D 8ST0/8ST5 L/C 0.7 8ST7 - P/S C - 0.66 P M 0.5 0.66 0.66 S M - P L 1.66 - #16 P/S C 1.15 1.15 #12 P/S C 2.06 - #22D / #20 P/S L 8.5 +0 -0.2 - #16 P L 5.3 0.1 - #22D P/S C 4 +0 -0.2 - #20 / #16 / #12 P/S C 5 0.1 - #22D P M 6 0.1 6.5 +0 -0.2 #22D / #20 / #16 P/S C - 4 0.1 #20 S M - 6.5 0.1 P/S L/C 14.07 / 15.06 P M 14.24 / 15.23 #20 P/S #16 P #22D C Length P/S #20 #16 / #12 L Type #16 #22D 8ST5 Shell type #20 L 14.07 / 15.06 C 14.24 / 15.23 L 18.62 / 19.61 P/S C 14.24 / 15.23 P/S L/C 1.43 / 2.23 P M 1.60 / 2.40 L 1.43 / 2.23 C 1.60 / 2.40 P/S #16 P L 5.98 / 6.78 #16 / #12 P/S C 1.60 / 2.40 #22D P M 13.86 / 14.86 #20 S M 13.86 / 14.86 #22D / #20 / #16 P/S C 14.79 / 15.79 Note: All dimensions are in millimeters (mm) (c) 2012 - SOURIAU 25 8ST Series Contacts & Tooling Contacts: Straight PC tail contacts ........................................................................................................... Crimp contacts ........................................................................................................................... Coaxial contacts #12 ................................................................................................................ Solder cup .................................................................................................................................... Quadrax #8 contacts ................................................................................................................ Wire wrap contacts .................................................................................................................... Thermocouple contacts ........................................................................................................... Dummy contacts ........................................................................................................................ Filler plugs .................................................................................................................................... 28 29 30 30 30 31 31 32 32 Wiring instructions ........................................................................................................................... 33 Tooling: Crimping tools ............................................................................................................................. Insertion & extraction tools...................................................................................................... Backshell tightening tools ....................................................................................................... Tightening support...................................................................................................................... Slackening tools ......................................................................................................................... Tightening of fixing nuts, receptacle type 7....................................................................... 34 35 35 35 35 35 8ST Series VG96912 & JN1003 Straight PC tail contacts Shell type Contact length Contact size Contact type SOURIAU Part Number (no color code) P 8599-0720 S 8599-0721 P 8599-0771 S 8599-0772 P 8599-7496A P 8599-0730 S 8599-0731 P 8599-0724 S 8599-0725 P 8599-0726 S 8599-0727 P 8599-7929 S 8599-7932 P 8599-8028 P 8599-0779 S 8599-0788 P 8599-0780 S 8599-0789 P 8599-7711 S 8599-7710 #22D P 8599-0728 #20 S 8599-0786 #22D L #20 #16 #22D 8ST0 8ST5 #20 C #16 #12 M #22D #22D C #20 8ST7 #16 M 28 (c) 2012 - SOURIAU Profile 8ST Series VG96912 & JN1003 Crimp contacts Contact size Contact type SOURIAU P/N (no color code) QPL Part Number P 8599-0702 JJ M39029/58-360 Black / Blue / Orange S 8599-0706 900 M39029/56-348 Grey / Yellow / Orange P 8599-0703 SA M39029/58-363 Orange / Blue / Orange S 8599-0707 900 M39029/56-351 Brown / Green / Orange P 8599-0704 MJ M39029/58-364 Yellow / Blue / Orange S 8599-0708 900 M39029/56-352 Red / Green / Orange P 8599-0705 MJ M39029/58-365 Green / Blue / Orange S 8599-0709 900 M39029/56-353 Orange / Green / Orange P 8599-7560 - - S 8599-7561 - - P 8599-7534 - - S 8599-7535 - - Profile and color code #22D #20 #16 #12 #8 Power #4 Power (c) 2012 - SOURIAU 29 8ST Series VG96912 & JN1003 Coaxial contacts #12 Designation Part number Coaxial socket solder #12 THA1-0151A Coaxial pin solder #12 THA1-0152A Coaxial pin crimp contact #12 THA1-0155A Coaxial crimp contact #12 THA1-0156A Solder cup Contact size Contact type #22D Pin 8599-0750 900 #20 Pin 8599-0077A 900 Part number #16 Pin 8599-7482A 900 #12 Socket 8599-7485A 900 For other contacts type please consult us. Quadrax #8 contacts Contact type Version PCB mount Pin Crimp PCB mount Socket Crimp 30 (c) 2012 - SOURIAU Souriau Part number Cross Norm ETH1-1237A - ETH1-1501A - ETH1-1345A EN3155-074 ETH1-1503A - ETH1-1238A - ETH1-1502A - ETH1-1346A EN3155-075 ETH1-1504A - T 125C 200C 125C 200C Impedance Sealing Release Sealed Rear 100 150 100 150 100 150 100 150 8ST Series VG96912 & JN1003 Wire wrap contacts Contact size Contact type Part number Contact O (mm) #22D Pin 8599-0790 JJ 0.76 0.86 #20 Pin 8599-0791 900 1 0.86 Profile (mm) Thermocouple contacts Contact size Contact type Pin Souriau part number (without color code) Part number - M39029/87-472 MIL-DTL-38999 contacts Profile and color code O Contact (mm) Wire section Awg min max 0.75 28 22 1 24 20 mm2 min O Over insulation (mm) max min max 0.095 0.34 0.76 1.37 1.02 2.11 Red / Violet / Yellow #22D Chromel Socket - M39029/88-484 Yellow / Grey / Yellow Pin - M39029/87-471 Brown / Violet / Yellow #22D Alumel Socket - M39029/88-483 Orange / Grey / Yellow Pin 8599-0749 900 8599-0949 900 Blue / Violet / Yellow #20 Chromel Socket 8599-0753 900 8599-0953 900 Grey / Grey / Yellow Pin 0.21 0.6 8599-0761 900 8599-0961 900 Green / Violet / Yellow #20 Alumel Socket 8599-0765 900 8599-0965 900 Violet / Grey / Yellow (c) 2012 - SOURIAU 31 8ST Series VG96912 & JN1003 Dummy contacts Size Part number #16 8599-6A016001A #8 8599-0308 #4 8599-0310 8599-0308 Filler plugs Contact size #22D 32 Filler plugs MS Part number (Rev. N) Souriau Part number JN1003 (EFA)* Part number Color MS27488-22-2 8660-212 JN1003 N 22 Black #20 MS27488-20-2 8522-389A JN1003 N 20 Red #16 MS27488-16-2 8522-390A JN1003 N 16 Blue #12 MS27488-12-2 8522-391A JN1003 N 12 Yellow (c) 2012 - SOURIAU Direction of introduction in grommet These filler plugs are installed at the rear of unwired contact to maintain connector sealing. * Please consult us, our product will be evaluated against the final drafts/standards when available. 8ST Series VG96912 & JN1003 Wiring instruction Cable preparation and wire stripping Contact size #26 L #22D #20 #16 4 #12 6 #8 #4 12 L L = length of wire stripping Insertion of wire in contact barrel Conductor insulation 0.5 to 0.8 mm Wire When inserting the stripped wire into the contact barrel check that no strands are left outside and that the wire is visible through the wire inspection hole in the barrel. Barrel Inspection hole Important: - Slide any accessories over wire strands before carrying out the following operations. - Contacts are inserted and extracted from the rear of the connector. Insertion of the contacts Extraction of the contacts 1 - Engage the crimp cable / contact asembly into the longitudinal slot of the plastic tool (coloured tip). Slide the tool down the cable until the tip of the tool abuts the contact retention shoulder. 1 - Engage the appropriate cable into the longitudinal slot of the tool with the white tip towards connector. 2 - Introduce the contact into the required contact cavity in the insulator, pushing tool axialy, until the contact snaps into position in clip. 3 - Withdraw the tool (from rear). Check that contact is firmly locked by pulling wire gently. When connector is fully loaded, check the position of contact tips. They should all be in the same plane. Nota: For larger sizes of cable which are stiff enough manual insertion without tool is preferable. 1 2 3 2 - Slide the tool down towards the contact. Insert the tool in the insulator until it abuts the contact shoulder. 3 - Holding the tool-contact and cable assembly together, remove them simultaneously. 1 2 3 (c) 2012 - SOURIAU 33 8ST Series VG96912 & JN1003 Tooling Crimping tools Contact size #22D Contact type - - - Socket - - M22520/2-07 8476-07 - - - - - - Socket M22520/1-04 8365-04 - - - - - - - - - - - - - - - - - - - - - - - SP 593 M22520/23-02 8599-9601 M22520/23-04 M22520/23-11 - - - - - - pin - - - - - Socket - - - - - Plier M22520/2-01 (Souriau 8476-01) Plier M22520/31-01 Plier M22520/4-01 Plier M22520/5-01 Locator Part Number Locator Part number Locator Part Number Die set Part Number - - - Outer - - - Inner M22520/2-34 - Outer - M22520/31-02 - - Inner M22520/2-35 - - - Outer - - M22520/4-02 - M39029/102-558 M39029/103-559 #12 Coaxial M22520/5-03 Inner M22520/2-31 - - - Outer - - - M22520/5-05 closure B Inner K709 - - - Middle - - - Y631 closure B Ferrule - - - Y631 closure A * Pneumatic plier Note: for the #10 contact's plier and locator, please consult us. 34 8476-10 - Inner #8 Triaxial 8365-04 M22520/2-10 - #12 Coaxial #8 Coaxial M22520/1-04 8365-04 Pin Contact type #16 Coaxial M22520/1-04 Socket Contact size M39029/28-211 M39029/75-416 Locator Part number 8476-09 Pin #4 Power Turret Part number M22520/2-09 Socket #8 Power Locator Part number - Pin #12 Locator Part number Norm Souriau Plier * M22520/23-01 - Socket #16 Turret Part number Norm Souriau Plier M300BT Pin Pin #20 Plier M22520/2-01 (Souriau 8476-01) Plier M22520/1-01 (c) 2012 - SOURIAU 8ST Series VG96912 & JN1003 Insertion & extraction tools Contact size Material #26 #22D Part number Color MIL standard Souriau Insertion Extraction Plastic - 8599-0399 900 Black White Plastic M81969/14-01 - Green White #20 Plastic M81969/14-10 - Red Orange #16 Plastic M81969/14-03 - Blue White #12 Plastic M81969/14-04 - Yellow White #10 Plastic M81969/14-05 - Grey - #8 #4 Plastic M81969/14-12 - - Green Metalic - 8660-197 - - Plastic M81969/14-07 - - Blue Metalic - 8533-8175 - - Backshell tightening tools Tightening support Backshell tightening pliers, part number: 8498-03 Square jaws (order 2 jaws), part number: 8500-1015 8498-03 Tightening of rear accessories: Shell size 9 11 Max torque in m/daN 13 15 17 19 0.62 21 23 Part number: 8599-0803 This tool is made up of dummy receptacles housings of all 9 sizes for all key polarisation, and locates free connectors during wiring and fitting of rear accessories. 8599-0803 25 Slackening tools Strap clamp, part number: 8498-04 Spare strap, part number: 8498-103 8498-04 1.24 Tightening of fixing nuts, receptacle type 7 Shell size 08 10 12 14 16 18 20 22 24 Nut dimension across flats 19.1 22.2 27.0 30.2 33.3 36.5 39.7 42.7 46.0 Max tightening torque on nut (mN) 4 6 9 10 13 20 23 25 26 (c) 2012 - SOURIAU 35 8ST Series Common Section Backshells ........................................................................................................................................... 38 Protective caps .................................................................................................................................. 39 Dummy receptacles ........................................................................................................................ 40 Panel gasket ....................................................................................................................................... 40 Reductors ............................................................................................................................................ 41 Boots .................................................................................................................................................... 41 Orientations ........................................................................................................................................ 41 Coordinates information ................................................................................................................ 42 8ST Series VG96912 & JN1003 Backshells Aluminum backshells Backshell for shielded cables and heatshrink boot Backshell with cable clamp F A G OD J OH OC OE B Dimensions Shell size A Max B Max OC Max OD Max OE 0.2 F Min F Max G Max OH Max J Max 08 24.8 34 14 6.4 19 1.58 3.18 14.7 16 20 16 7.2 22 1.58 4.78 15.5 19 22 18 9.7 25 3.18 6.35 17.1 22 25 23.3 25 28 29 30 31 36 35 36 10 12 25.8 35 14 22 12.7 28 6.35 9.53 16 25 15.7 30 6.35 12.70 18 28 18.7 34 9.35 15.88 32 21.7 38 12.70 19.05 22 34 23.7 43 15.88 22.23 38 41 24 38 27.7 45 15.88 25.40 41 43 20 26.8 36 Ordering information Basic series 8LST 101 Size code: 101, 102, 103, 104, 105, 106, 107, 108, 109 Size code 101 102 103 104 105 106 107 108 109 = Shell size 08 10 12 14 16 18 20 22 24 Plating: F: Nickel G: Olive green cadmium Type: 52: Backshell with cable clamp 57: Backshell for shielded cables and heatshrink boot Note: All dimensions are in millimeters (mm) 38 (c) 2012 - SOURIAU G 52 26.8 8ST Series VG96912 & JN1003 Protective caps Metalic protective caps for receptacle L OB 23 Max O3.5 Min OC OA Dimensions Ordering information Shell size OA Max OB Min OC Max 08 10 12 14 16 18 20 22 24 19 22 26 29 33 36 39 44 46 14.6 17.8 22.5 25.7 28.9 32.1 35.2 38.4 41.6 23.5 26.77 31.55 36.83 40.31 43.18 46.36 49.19 52.71 L 84 100 116 Basic series 8500-: Cap for receptacle 8500- 02 -44D Size code: 02, 03, 04, 05, 27, 06, 07, 08, 09 Size code 02 03 04 05 27 06 07 08 09 = Shell size 8ST 08 10 12 14 16 18 20 22 24 Plating & fixing type: J: Olive green cadmium plating with metalic chain and ring D: Olive green cadmium plating with metalic chain and eyelet -44D: Nickel plating with metalic chain and eyelet Plastic protective caps Part numbers Cap for receptacle Cap for plug Cap for receptacle Cap for plug 08 15.40 16.65 8500 5585 A 70 777 10 18.30 19.72 8500 5586 A 70 205 12 22.65 - 8500 5587 A MS90376 16Y 14 25.80 30.80 8500 5588 A 8500 5600 16 29.20 33.90 8500 5589 A 8500 5601 18 32.40 37.00 8500 5590 A 8500 5602 20 35.60 39.00 8500 5591 A 8500 5592A 22 39.00 42.20 8500 5592 A 8500 5593A 24 42.20 44.50 8500 5593 A 70 472 A OA Shell size Note: All dimensions are in millimeters (mm) (c) 2012 - SOURIAU 39 8ST Series VG96912 & JN1003 Dummy receptacles Shell size D E C A B F Part numbers A Max B Max OC D Max E OF 0.13 08 8ST0-08GUR 18.35 16.05 12.04 21.00 15.10 3.05 10 8ST0-10GUR 18.35 16.05 15.02 24.20 18.26 3.05 12 8ST0-12GUR 18.35 16.05 19.08 26.60 20.62 3.05 14 8ST0614GUR 18.35 16.05 22.26 29.00 23.01 3.05 16 8ST0-16GUR 18.35 16.05 25.43 31.35 24.61 3.05 18 8ST0-18GUR 18.35 16.05 28.61 33.70 26.98 3.05 20 8ST0-20GUR 18.35 15.29 31.78 36.90 29.38 3.05 22 8ST0-22GUR 18.35 15.29 34.96 40.10 31.77 3.05 24 8ST0-24GUR 18.35 15.29 3.73 38.13 43.30 34.92 Panel gasket Shell size Part numbers Gasket for receptacle type 0 8525-1431 8590-2251 AS3582-017 10 8525-1432 8590-2252 AS3582-019 12 8525-1433 8590-2253 AS3582-022 14 8525-1434 8590-2254 AS3582-024 16 8525-1435 8590-2255 AS3582-026 18 8525-1436 8590-2256 AS3582-028 20 8525-1437 8590-2257 AS3582-128 22 8525-1438 8590-2258 AS3582-130 24 8525-1439 8590-2259 AS3582-132 Note: All dimensions are in millimeters (mm) 40 O ring for receptacle type 7 08 (c) 2012 - SOURIAU Notes: - 8ST0 gasket must be ordered separatly - Compliant to 8ST Series temperature range - max 200C - For use up to 125C, gaskets in accordance with VG95328: VG95328T07A...= non conductive VG95328 07B...= conductive (for HF application) 8ST Series VG96912 & JN1003 Reductors Reductor Size Part number For cable For pin contacts For socket contacts #8 Power 8599-7645 #10 8599-7580 8599-7581 #4 Power 8400-2352A 10 mm 8599-7534A 8599-7535A Boots Boot Size #8 Power #4 Power Part number Admissible wire section mm For cable 8599-4542 5 6.5 8.48 a 10 mm 8599-4547 2.5 4 #10 8599-4594 6.35 7.5 #4 - #5 8599-4593 4 5.8 #6 - #8 Orientations Polarization is determined by the master keyway position. The secondary keyway positions remain fixed. A N D C C D N A B 28 28 37 37 5 5 B 100 100 View from front face of receptacle View from front face of plug Angles (degrees) Shell size N A B C D 08 95 77 - - 113 10 95 81 67 123 109 12 95 75 63 127 115 14 95 74 61 129 116 16 95 77 65 125 113 18 95 77 65 125 113 20 95 77 65 125 113 22 95 80 69 121 110 24 95 80 69 121 110 (c) 2012 - SOURIAU 41 8ST Series VG96912 & JN1003 Coordinates for straight PC tail terminations Viewed from front face of male insulator Hole sizes: 1mm min. (#22 and #20 contacts) and 1.3mm min. (#16 contact) coordinates in mm. 08 12 35 98 +Y +Y +Y -X +X -X +X -Y -X +X -Y -Y Ctc X Y Ctc X Y Ctc X Y Ctc X Y 1 +0.92 +2.54 7 -2.66 -0.47 1 +1.14 +1.98 A +1.65 +0.97 2 +2.34 +1.35 8 -2.34 +1.35 2 +1.98 -1.14 B 0.00 -1.90 3 +2.66 -0.47 9 -0.92 +2.54 3 0.00 -2.29 C -1.65 +0.97 4 +1.74 -2.07 10 0.00 +1.03 4 +1.98 -1.14 5 0.00 -2.70 11 +0.89 -0.51 5 +1.14 +1.98 6 -1.74 -2.07 12 -0.89 -0.51 6 0.00 0.00 10 02 04 05 26 +Y +Y +Y +Y -X +X -X +X -Y -X +X -Y +X -Y -Y Ctc X Y Ctc X Y Ctc X Y Ctc X Y Ctc X Y A 0.00 +2.41 A +1.65 +1.65 A +1.65 +1.42 1 +1.69 +3.79 14 0.00 +3.50 B 0.00 -2.41 35 B +1.65 -1.65 B +2.86 -1.65 2 +3.09 +2.77 15 +1.70 +1.76 C -1.65 -1.65 C 0.00 -3.30 3 +3.95 +1.28 16 +2.55 +0.29 D -1.65 +1.65 D -2.86 -1.65 4 +4.13 -0.44 17 +1.70 -1.18 E -1.65 +1.42 5 +3.58 -2.10 18 +0.85 -2.65 6 +2.40 -3.37 19 -0.85 -2.65 7 0.00 -4.13 20 -1.70 -1.18 +Y -X +X -Y 42 -X (c) 2012 - SOURIAU Ctc X Y Ctc X Y Ctc X Y 8 -2.40 -3.37 21 -2.55 +0.29 1 0.00 +3.71 6 0.00 -3.71 10 -2.16 +3.00 9 -3.58 -2.10 22 -1.70 +1.76 2 +2.16 +3.00 7 -2.16 -3.00 11 0 +1.42 10 -4.13 -0.44 23 0.00 +1.76 3 +3.51 +1.14 8 -3.51 -1.14 12 +1.24 -0.89 11 -3.95 +1.28 24 +0.85 +0.29 9 -3.51 +1.14 13 -1.24 -0.89 12 -3.09 +2.77 25 0.00 -1.18 13 -1.69 +3.79 26 -0.85 +0.29 4 +3.51 -1.14 5 +2.16 -3.00 8ST Series VG96912 & JN1003 10 98 99 Ctc X Y A +1.65 +2.85 +3.30 B +3.30 0.00 0.00 C +1.65 -2.87 D -1.65 -2.87 E -3.30 0.00 F -1.65 +2.87 G 0.00 0.00 +Y +Y Ctc -X +X -Y X Y A 0.00 B +3.30 C +1.65 -2.87 D -1.65 -2.87 E -3.30 0.00 F 0.00 0.00 -X +X -Y 12 04 08 35 43 +Y +Y +Y +Y -X +X -X +X -Y -X +X -Y -X +X -Y -Y Ctc X Y Ctc X Y Ctc X Y Ctc X Y Ctc X Y Ctc X Y A 0.00 +3.81 A +1.65 +3.99 1 +1.14 +5.00 12 -4.62 +2.24 1 +1.80 +5.54 23 +3.92 +1.27 B +3.71 +0.89 B +4.32 0.00 2 +3.20 +4.01 13 -3.20 +4.01 2 -1.80 +5.54 24 +4.10 -0.43 C 0.00 -2.11 C +3.05 -3.05 3 +4.62 +2.24 14 -1.14 +5.00 3 +3.42 +4.71 25 +3.57 -2.06 D -3.71 +0.89 D 0.00 -4.32 4 +5.16 0.00 15 +1.14 +2.72 4 +4.71 +3.42 26 +1.99 -2.74 E -3.05 -3.05 5 +4.62 -2.24 16 +2.97 +0.66 5 +5.54 +1.80 27 +0.86 -4.03 -4.03 98 +Y -X F -4.32 0.00 6 +3.20 -4.01 17 +2.36 -1.91 6 +5.82 0.00 28 -0.86 G -1.65 +3.99 7 +1.14 -5.00 18 0.00 -3.05 7 +5.54 -1.80 29 -1.99 -2.74 H 0.00 +1.12 8 -1.14 -5.00 19 -2.36 -1.91 8 +4.71 -3.42 30 -3.57 -2.06 +X -Y 9 -3.20 -4.01 20 -2.97 +0.66 9 +3.42 -4.71 31 -4.10 -0.43 10 -4.62 -2.24 21 -1.14 +2.72 10 +1.80 -5.54 32 -3.92 +1.27 11 -5.16 0.00 22 0.00 -0.76 +2.28 11 0.00 -5.82 33 -2.54 12 -1.80 -5.54 34 -1.68 +3.76 13 -3.42 -4.71 35 0.00 +2.42 +1.21 14 -4.71 -3.42 36 +1.21 15 -5.54 -1.80 37 +2.42 0.00 16 -5.82 0.00 38 +1.21 -1.21 Ctc X Y Ctc X Y 17 -5.54 +1.80 39 0.00 -2.42 A 0.00 +4.95 F -4.17 -2.67 18 -4.71 +3.42 40 -1.21 -1.21 B +3.18 +3.81 G -4.90 +0.76 19 -3.42 +4.71 41 -2.42 0.00 C +4.90 +0.76 H -3.18 +3.81 20 0.00 +4.12 42 -1.21 +1.21 D +4.17 -2.67 J +1.65 -0.38 21 +1.68 +3.76 43 0.00 0.00 E 0.00 -3.43 K -1.65 -0.38 22 +2.54 +2.28 (c) 2012 - SOURIAU 43 8ST Series VG96912 & JN1003 14 05 18 19 +Y +Y +Y -X +X -X +X -Y +X -Y -Y Ctc X Y Ctc X Y Ctc X Y Ctc X Y Ctc X Y A 0 +2.54 A +1.65 +6.40 K -4.95 +2.87 A 0.00 +5.72 L -4.95 +2.87 B +4.42 +0.61 B +4.95 +2.87 L -1.65 +6.40 B +3.30 +5.72 M -3.30 +5.72 C +2.39 +3.76 C +6.60 0.00 M -1.65 +2.87 C +4.95 +2.87 N -1.65 +2.87 D -2.39 -3.76 D +4.95 -2.87 N +1.65 +2.87 D +6.60 0.00 P +1.65 +2.87 E -4.42 +0.61 E +3.30 -5.72 P +3.30 0.00 E +4.95 -2.87 R +3.30 0.00 F 0.00 -5.72 R +1.65 -2.87 F +3.30 -5.72 S +1.65 -2.87 G -3.30 -5.72 S -1.65 -2.87 G 0.00 -5.72 T -1.65 -2.87 H -4.95 -2.87 T -3.30 0.00 H -3.30 -5.72 U -3.30 0.00 J -6.60 0.00 U 0.00 0.00 J -4.95 -2.87 V 0.00 0.00 K -6.60 0.00 35 97 +Y -X +X -Y 44 -X (c) 2012 - SOURIAU Ctc X Y A +1.65 +5.94 +Y Ctc X Y Ctc X Y 1 +1.14 +6.65 20 +3.12 +3.02 +1.02 B +4.52 +4.52 C +5.84 -0.58 D +4.52 -4.52 E +1.65 -5.94 5 +6.75 F -2.26 -5.97 6 +6.27 G -5.26 -2.41 7 +5.08 -4.45 H -5.94 +1.65 8 +3.30 -5.89 J -4.52 +4.52 9 +1.14 -6.65 K -1.65 +5.94 10 -1.14 -6.65 L -1.19 +2.06 11 -3.30 -5.89 M +1.19 -2.06 12 -5.08 -4.45 -X +X -Y 2 +3.12 +5.51 21 +4.32 3 +5.36 +4.06 22 +4.32 -1.27 4 +6.45 +2.03 23 +3.12 -3.23 -0.25 24 +1.14 -4.37 -2.49 25 -1.14 -4.37 26 -3.12 -3.23 27 -4.32 -1.27 28 -4.32 +1.02 29 -3.12 +3.02 30 -1.14 +4.37 31 +1.14 +1.88 13 -6.27 -2.49 32 +2.29 -0.10 14 -6.76 -0.25 33 +1.14 -2.08 15 -6.45 +2.03 34 -1.14 -2.08 16 -5.36 +4.06 35 -2.29 -0.10 17 -3.12 +5.51 36 -1.14 +1.88 18 -1.14 +6.65 37 0.00 -0.10 19 +1.14 +4.37 8ST Series VG96912 & JN1003 16 06 08 26 +Y +Y +Y -X +X -X +X -Y -X -Y +X Ctc X Y J -1.70 -7.98 K -4.80 -6.60 L -7.06 -4.09 M -8.10 -0.86 N -7.75 +2.51 +5.44 -Y P -6.07 R -3.33 +7.44 S -1.78 +4.50 T +1.78 +4.50 Ctc X Y Ctc X Y Ctc X Y U +4.45 +2.39 A +3.07 +5.31 A 0.00 +5.99 A 0.00 +8.15 V +4.53 -0.91 B +6.12 0.00 B +3.25 +2.18 B +3.33 +7.44 W +3.02 -3.84 C 0.00 -6.12 C +5.84 -1.98 C +6.07 +5.44 X 0.00 -5.16 D -6.12 0.00 D +2.39 -5.49 D +7.75 +2.51 Y -3.02 -3.84 E -3.07 +5.31 E -2.39 -5.49 E +8.10 -0.86 Z -4.53 -0.91 F 0.00 0.00 F -5.84 -1.98 F +7.06 -4.09 a -4.45 +2.39 G -3.25 +2.18 G +4.80 -6.60 b 0.00 +1.65 H 0.00 -1.32 H +1.70 -7.98 c 0.00 -1.65 35 99 +Y +Y -X +X -X -Y Ctc X Y Ctc X Y 25 0.00 +8.36 41 +3.96 +4.47 26 0.00 +4.47 42 +3.96 +2.18 27 0.00 +2.18 43 +3.96 -0.10 +X -Y Ctc X Y Ctc X Y 28 0.00 -0.10 44 +3.96 -2.39 Ctc X Y Ctc X Y 1 -7.92 +2.18 13 -3.96 -0.10 29 0.00 -2.39 45 +3.96 -4.67 A 0.00 +8.15 N -7.75 +2.51 2 -7.92 -0.10 14 -3.96 -2.39 30 0.00 +4.67 46 +3.96 -6.96 B +3.33 +7.44 P -6.07 +5.44 3 -7.92 -2.39 15 -3.96 -4.67 31 0.00 -6.96 47 +6.15 +5.61 C +6.07 +5.44 R -3.33 +7.44 4 -6.15 +5.61 16 -3.96 -6.96 32 +2.26 +8.03 48 +5.94 +3.33 D +7.75 +2.51 S -1.78 +4.50 5 -5.94 +3.33 17 -2.26 +8.03 33 +1.98 +5.61 49 +5.94 +1.04 E +8.10 -0.86 T +1.78 +4.50 6 -5.94 +1.04 18 -1.98 +5.61 34 +1.98 +3.33 50 +5.94 -1.24 F +7.06 -4.09 U +4.45 +2.39 7 -5.94 -1.24 19 -1.98 +3.33 35 +1.98 +1.04 51 +5.94 -3.53 G +4.80 -6.60 V +3.81 -1.91 8 -5.94 -3.53 20 -1.98 +1.04 36 +1.98 -1.24 52 +5.94 -5.82 H +1.70 -7.98 W 0.00 -4.09 9 -5.94 -5.82 21 -1.98 -1.24 37 +1.98 -3.53 53 +7.92 +2.18 J -1.70 -7.98 X -3.81 -1.91 10 -4.37 +7.09 22 -1.98 -3.53 38 +1.98 -5.82 54 +7.92 -0.10 K -4.80 -6.60 Y -4.45 +2.39 11 -3.96 +4.47 23 -1.98 -5.82 39 +1.98 -8.10 55 +7.92 2-.39 L -7.06 -4.09 Z 0.00 +0.64 12 -3.96 +2.18 24 -1.98 -8.10 40 +4.37 +7.09 M -8.10 -0.86 (c) 2012 - SOURIAU 45 8ST Series VG96912 & JN1003 18 11 32 +Y -X +X -Y 35 +Y -X +X -Y 46 (c) 2012 - SOURIAU +Y Ctc X Y A +2.67 +6.60 Ctc X Y Ctc X Y A +1.68 +8.97 T -1.68 +8.97 B +6.35 +3.35 B +4.80 +7.75 U 0.00 +5.84 C +6.99 -1.35 C +7.26 +5.51 V +3.15 +4.90 D +4.55 -5.46 D +8.76 +2.49 W +5.31 +2.41 E 0.00 -7.14 E +9.07 -0.84 X +5.79 -0.84 F -4.55 -5.46 F +8.15 -4.06 Y +4.42 -3.84 G -6.99 -1.35 G +6.15 -6.73 Z +1.65 -5.61 H -6.35 +3.35 H +3.30 -8.51 a -1.65 -5.61 J -2.67 +6.60 J 0.00 -9.12 b -4.42 -3.84 K 0.00 +2.67 K -3.30 -8.51 c -5.79 -0.84 L 0.00 -2.34 L -6.15 -6.73 d -5.31 +2.41 M -8.15 -4.06 e -3.15 +4.90 N -9.07 -0.84 f 0.00 +2.44 P -8.76 +2.49 g +2.44 0.00 R -7.26 +5.51 h 0.00 -2.44 S -4.80 +7.75 j -2.44 0.00 -X +X -Y Ctc X Y Ctc X Y Ctc X Y Ctc X Y Ctc X Y 1 -9.07 +2.29 15 -5.11 -4.57 28 -1.14 +2.29 41 +1.14 -6.86 54 +5.11 0.00 2 -9.07 +0.08 16 -5.11 -6.86 29 -1.14 0.00 42 +1.14 -9.14 55 +5.11 -2.29 3 -9.07 -2.29 17 -3.12 +8.00 30 -1.14 -2.29 43 +3.12 +8.00 56 +5.11 -4.57 4 -7.09 +5.72 18 +3.12 +5.72 31 -1.14 -4.57 44 +3.12 +5.72 57 +5.11 -6.86 5 -7.09 +3.43 19 -3.12 +3.43 32 -1.14 -6.86 45 +3.12 +3.43 58 +7.09 +5.72 6 -7.09 +1.14 20 -3.12 +1.14 33 -1.14 -9.14 46 +3.12 +1.14 59 +7.09 +3.43 7 -7.09 -1.14 21 -3.12 -1.14 34 +1.14 +9.14 47 +3.12 -1.14 60 +7.09 +1.14 8 -7.09 -3.43 22 -3.12 -3.43 35 +1.14 +6.86 48 +3.12 -3.43 61 +7.09 -1.14 9 -7.09 -5.72 23 -3.12 -5.72 36 +1.14 +4.57 49 +3.12 -5.72 62 +7.09 -3.43 10 -5.11 +6.86 24 -3.12 -8.00 37 +1.14 +2.29 50 +3.12 -8.00 63 +7.09 -5.72 11 -5.11 +4.57 25 -1.14 +9.14 38 +1.14 0.00 51 +5.11 +6.86 64 +9.07 +2.29 12 -5.11 +2.29 26 -1.14 +6.86 39 +1.14 -2.29 52 +5.11 +4.57 65 +9.07 0.00 13 -5.11 0.00 27 -1.14 +4.57 40 +1.14 -4.57 53 +5.11 +2.29 66 +9.07 -2.29 14 -5.11 -2.29 8ST Series VG96912 & JN1003 20 16 35 +Y +Y -X +X -X +X -Y -Y Ctc X Y Ctc X Y Ctc X Y 14 +1.35 -10.82 36 +7.90 -3.58 58 +3.40 -5.05 15 -1.35 -10.82 37 +6.55 -5.59 59 +1.22 -6.12 16 -3.71 -10.26 38 +4.67 -7.11 60 -1.22 -6.12 17 -5.89 -9.19 39 +2.49 -8.18 61 -3.40 -5.05 -3.53 18 -7.77 -7.67 40 0.00 -8.81 62 -5.28 19 -9.27 -5.77 41 -2.49 -8.18 63 -6.02 -1.22 20 -10.31 -3.58 42 -4.67 -7.11 64 -6.02 +1.22 21 -10.85 -1.22 43 -6.55 -5.59 65 -5.28 +3.53 Ctc X Y Ctc X Y Ctc X Y 22 -10.85 +1.22 44 -7.90 -3.58 66 -3.40 +5.05 A +3.00 +8.18 J -8.66 +0.91 1 +1.35 +10.82 23 -10.31 +3.58 45 -8.43 -1.22 67 -1.22 +3.71 B +6.88 +5.36 K -6.88 +5.36 2 +3.71 +10.26 24 -9.27 +5.77 46 -8.43 +1.22 68 +1.22 +3.71 C +8.66 +0.91 L -3.00 +8.18 3 +5.89 +9.19 25 -7.77 +7.67 47 -7.90 +3.58 69 +3.18 +2.29 D +7.82 -3.81 M 0.00 +4.45 4 +7.77 +7.67 26 -5.89 +9.19 48 -6.55 +5.59 70 +3.94 0.00 E +4.62 -7.37 N +3.91 +1.57 5 +9.27 +5.77 27 -3.71 +10.26 49 -4.67 +7.11 71 +3.18 -2.29 F 0.00 -8.71 P +2.39 -3.10 6 +10.31 +3.58 28 -1.35 +10.82 50 -2.49 +8.18 72 +1.22 -3.71 G -4.62 -7.37 R -2.39 -3.10 7 +10.85 +1.22 29 0.00 +8.20 51 -1.22 +6.12 73 -1.22 -3.71 H -7.82 -3.81 S -3.91 +1.57 -2.29 39 8 +10.85 -1.22 30 +2.49 +8.18 52 +1.22 +6.12 74 -3.18 9 +10.31 -3.58 31 +4.67 +7.11 53 +3.40 +5.05 75 -3.94 0.00 10 +9.27 -5.77 32 +6.55 +5.59 54 +5.28 +3.53 76 -3.18 +2.29 +1.35 11 +7.77 -7.67 33 +7.90 +3.58 55 +6.02 +1.22 77 0.00 12 +5.89 -9.19 34 +8.43 +1.22 56 +6.02 -1.22 78 +1.22 -0.74 13 +3.71 -10.26 35 +8.43 -1.22 57 +5.28 -3.53 79 -1.22 -0.74 +Y 41 +Y -X +X -X +X -Y Ctc X Y Z +5.92 +4.09 a +7.15 +0.87 b +6.73 -2.55 c +4.78 -5.39 d +1.73 -6.99 e -1.73 -6.99 f -4.78 -5.39 Ctc X Y Ctc X Y Ctc X Y A +1.65 +10.44 P -9.42 -4.80 d +2.84 -6.73 B +4.80 +9.42 R -10.44 -1.65 e -2.84 -6.73 Ctc X Y Ctc X Y g -6.73 -2.55 C +7.47 +7.47 S -10.44 +1.65 f -5.51 -4.80 A 0.00 +10.60 M -3.26 -10.09 h -7.15 +0.87 -Y D +9.42 +4.80 T -9.42 +4.80 g -7.11 -1.88 B +3.28 +10.09 N -6.23 -8.58 i -5.92 +4.09 E +10.44 +1.65 U -7.47 +7.47 h -7.11 +1.45 C +6.23 +8.58 P -8.58 -6.23 j -3.35 +6.38 F +10.44 -1.65 V -4.80 +9.42 i -5.89 +4.55 D +8.58 +6.23 R -10.09 -3.28 k 0.00 +3.81 G +9.42 -4.80 W -1.65 +10.44 j -3.20 +6.50 E +10.09 +3.28 S -10.60 0.00 m +2.98 +2.38 H +7.47 -7.47 X 0.00 +7.49 k 0.00 +4.17 F +10.60 0.00 T -10.09 +3.28 n +3.71 -0.85 J +4.80 -9.42 Y +3.20 +6.50 m +2.90 +1.22 G +10.09 -3.28 U -8.58 +6.23 p -1.66 -3.43 K +1.65 -10.44 Z +5.89 +4.55 n +2.69 -2.72 H +8.58 -6.23 V -6.23 +8.58 q +1.66 -3.43 L -1.65 -10.44 a +7.11 +1.45 p 0.00 -4.80 J +6.23 -8.58 W -3.28 +10.09 r -3.71 -0.85 M -4.80 -9.42 b +7.11 -1.88 q -2.69 -2.72 K +3.28 -10.09 X 0.00 +7.20 s -2.98 +2.38 N -7.47 -7.47 c +5.51 -4.80 r -2.90 +1.22 L 0.00 -10.60 Y +3.35 +6.38 t 0.00 0.00 (c) 2012 - SOURIAU 47 8ST Series VG96912 & JN1003 22 21 Ctc X Y 53 A +3.25 +9.78 +Y +Y -X +X -Y Ctc X Y Ctc X Y m -5.72 +6.60 B +7.34 +7.24 N -11.43 +3.30 n -2.84 +8.26 C +9.80 +3.12 P -8.53 +8.26 p 0.00 +6.60 D +10.16 -1.65 R -5.72 +9.91 q +2.84 +4.95 E +8.33 -6.07 S -2.84 +11.56 r +5.72 +3.30 F +4.65 -9.19 T 0.00 +9.91 s +5.72 0.00 G 0.00 -10.31 U +2.84 +8.26 t +5.72 -3.30 H -4.65 -9.19 V +5.72 +6.60 u +2.84 -4.95 J -8.33 -6.07 W +8.53 +4.95 v 0.00 -6.60 K -10.16 -1.65 X +8.53 +1.65 w -2.84 -4.95 L -9.80 +3.12 Y +8.53 -1.65 x -5.72 -3.30 M -7.34 +7.24 Z +8.53 -4.95 y -5.72 0.00 N -3.25 +9.78 a +5.72 -6.60 z -5.72 +3.30 +4.95 -X +X -Y P 0.00 +6.22 b +2.84 -8.26 AA -2.84 R +4.06 +3.71 Ctc X Y Ctc X Y c 0.00 -9.91 BB 0.00 +3.30 S +5.44 -0.89 A +2.84 +11.56 G +8.53 -8.26 d -2.84 -8.26 CC +2.84 +1.65 T +2.39 -4.93 B +5.72 +9.91 H +5.72 -10.41 e -5.72 -6.60 DD +2.84 -1.65 U -2.39 -4.93 C +8.53 +8.26 J -5.72 -10.41 f -8.53 -4.95 EE 0.00 -3.30 V -5.44 -0.89 D +11.43 +3.30 K -8.53 -8.26 g -8.53 -1.65 FF -2.84 -1.65 W -4.06 +3.71 E +11.43 0.00 L -11.43 -3.30 h -8.53 +1.65 GG -2.84 +1.65 X 0.00 0.00 F +11.43 -3.30 M -11.43 0.00 k -8.53 +4.95 HH 0.00 0.00 24 04 Ctc X Y Ctc X Y 29 Ctc X Y +Y R -8.23 -10.80 q -7.90 -6.38 +Y J -2.31 -11.99 S -10.77 -8.28 r -9.58 -3.35 K -6.68 -10.31 T -12.52 -5.21 s -10.46 0.00 L -10.03 -7.04 U -13.49 -1.75 t -9.58 +3.35 M -11.91 -2.77 N -11.91 +2.77 P -10.03 +7.04 -6.55 +10.31 +8.15 -X +X -Y Ctc 48 -13.49 +1.75 u -7.90 +6.38 -12.52 +5.21 v -5.38 +8.78 X -10.77 +8.28 w -2.18 +10.08 R Y -8.23 +10.80 x +1.75 +6.66 S -2.31 Z -5.16 +12.57 y +4.37 +3.78 T +2.31 +8.15 a -1.75 +13.49 z +6.55 0.00 U +5.79 +4.93 b +2.18 +10.08 AA +4.37 -3.78 c +5.38 +8.78 BB +1.75 -6.66 -X +X -Y V +8.10 0.00 W +6.10 -4.60 d +7.90 +6.38 CC -1.75 -6.66 Ctc X Y X +2.31 -7.37 e +9.58 +3.35 DD -4.37 -3.78 A 0.00 +12.22 Y -2.31 -7.37 -5.21 f +10.46 0.00 EE -6.55 0.00 B +6.55 +10.31 Z -6.10 -4.60 -8.28 g +9.58 -3.35 FF -4.37 -3.78 C +10.03 +7.04 a -8.10 0.00 h +7.90 -6.38 GG -1.75 -6.66 D +11.91 +2.77 b -5.79 +4.93 +5.38 -8.78 HH 0.00 +3.35 E +11.91 -2.77 c 0.00 +4.09 +2.18 -10.08 JJ +2.18 0.00 F +10.03 -7.04 d +3.40 0.00 -2.18 -10.08 KK 0.00 -3.35 G +6.68 -10.31 e 0.00 -3.30 -5.38 -8.78 LL -2.18 0.00 H +2.31 -11.99 f -3.40 0.00 X Y Ctc A +1.75 +13.49 H +12.52 B +5.16 +12.57 J +10.77 C +8.23 +10.80 K +8.23 -10.80 D +10.77 +8.28 L +5.16 -12.57 k E +12.52 +5.21 M +1.75 -13.49 m F +13.49 +1.75 N -1.75 -13.49 n G +13.49 -1.75 P -5.16 -12.57 p (c) 2012 - SOURIAU X V W Y 8ST Series VG96912 & JN1003 24 35 Ctc X Y Ctc X Y Ctc X Y Ctc X Y Ctc X Y +Y 1 -12.17 +7.09 27 -6.32 +7.24 53 -2.11 0.00 79 +2.11 -7.24 104 +6.32 -12.07 2 -13.21 +4.83 28 -6.32 +4.83 54 -2.11 -2.41 80 +2.11 -9.65 105 +8.43 +11.28 3 -13.87 +2.41 29 -6.32 +2.41 55 -2.11 -4.83 81 +2.11 -12.07 106 +8.43 +8.43 4 -14.10 0.00 30 -6.32 0.00 56 -2.11 -7.24 82 +4.06 +13.49 107 +8.43 +6.02 5 -13.87 -2.41 31 -6.32 -2.41 57 -2.11 -9.65 83 +4.22 +10.85 108 +8.43 +3.61 6 -13.21 -4.83 32 -6.32 -4.83 58 -2.11 -12.07 84 +4.22 +8.43 109 +8.43 +1.19 -X +X -Y 43 +Y -X +X 7 -12.17 -7.09 33 -6.32 -7.24 59 0.00 +13.26 85 +4.22 +6.02 110 +8.43 -1.19 8 -10.77 +9.07 34 -6.32 -9.65 60 0.00 +10.85 86 +4.22 +3.61 111 +8.43 -3.61 9 -10.54 +4.83 35 -6.32 -12.07 61 0.00 +8.43 87 +4.22 +1.19 112 +8.43 -6.02 10 -10.54 +2.41 36 -4.06 +13.49 62 0.00 +6.02 88 +4.22 -1.19 113 +8.43 -8.43 11 -10.54 0.00 37 -4.22 +10.85 63 0.00 +3.61 89 +4.22 -3.61 114 +8.43 -10.85 12 -10.54 -2.41 38 -4.22 +8.43 64 0.00 +1.19 90 +4.22 -6.02 115 +10.77 +9.07 13 -10.54 -4.83 39 -4.22 +6.02 65 0.00 -1.19 91 +4.22 -8.43 116 +10.54 +4.83 +2.41 14 -10.77 -9.07 40 -4.22 +3.61 66 0.00 -3.61 92 +4.22 -10.85 117 +10.54 15 -8.43 +11.28 41 -4.22 +1.19 67 0.00 -6.02 93 +4.22 -13.26 118 +10.54 0.00 16 -8.43 +8.43 42 -4.22 -1.19 68 0.00 -8.43 94 +6.32 +12.60 119 +10.54 -2.41 -4.83 17 -8.43 +6.02 43 -4.22 -3.61 69 0.00 -10.85 95 +6.32 +9.65 120 +10.54 18 -8.43 +3.61 44 -4.22 -6.02 70 0.00 -14.10 96 +6.32 +7.24 121 +10.77 -9.07 19 -8.43 +1.19 45 -4.22 -8.43 71 +2.11 +12.07 97 +6.32 +4.83 122 +12.17 +7.09 20 -8.43 -1.19 46 -4.22 -10.85 72 +2.11 +9.65 98 +6.32 +2.41 123 +13.21 +4.83 21 -8.43 -3.61 47 -4.22 -13.26 73 +2.11 +7.34 99 +6.32 0.00 124 +13.87 +2.41 22 -8.43 -6.02 48 -2.11 +12.07 74 +2.11 +4.83 100 +6.32 -2.41 125 +14.10 0.00 23 -8.43 -8.43 49 -2.11 +9.65 75 +2.11 +2.41 101 +6.32 -4.83 126 +13.87 -2.41 24 -8.43 -10.85 50 -2.11 +7.24 76 +2.11 0.00 102 +6.32 -7.24 127 +13.21 -4.83 25 -6.32 +12.60 51 -2.11 +4.83 77 +2.11 -2.41 103 +6.32 -9.65 128 +12.17 -7.09 26 -6.32 +9.65 52 -2.11 +2.41 78 +2.11 -4.83 -Y Ctc X Y Ctc X Y 61 Ctc X Y Ctc X Y A +1.75 +13.49 Z -1.75 +13.4 +Y V -13.39 +2.57 t -7.24 +7.19 B +5.16 +12.57 a +4.37 +8.74 W -12.32 +5.84 u -4.39 +9.22 C +8.23 +10.80 b +6.55 +4.37 X -10.49 +8.71 v 0.00 +8.59 D +10.77 +8.28 c +8.74 0.00 Y -7.98 -11.05 w +3.73 +5.66 E +12.52 +5.21 d +8.74 -4.37 Z -4.98 +12.10 x +6.02 +3.10 F +13.49 +1.75 e +4.37 -8.74 a -1.73 +11.53 y +6.78 -0.25 G +13.49 -1.75 f 0.00 -8.74 b +1.73 +11.53 z +5.79 -3.53 H +12.52 -5.21 g -4.37 -8.74 c +4.39 +9.22 AA +3.33 -5.92 J +10.77 -8.28 h -8.74 -4.37 d +7.24 +7.19 BB 0.00 -6.78 K +8.23 -10.80 k -8.74 0.00 e +9.19 +4.45 CC -3.33 -5.92 -3.53 -X +X L +5.16 -12.57 m -6.55 +4.37 M 0.00 -13.49 n -4.37 +8.74 N -5.16 -12.57 p 0.00 +8.74 Ctc X f +10.13 +1.17 DD -5.79 g +9.96 -2.24 EE -6.78 -0.25 Y h +8.66 -5.41 FF -6.02 +3.10 -Y Y Ctc X P -8.23 -10.80 q +2.18 +4.37 A +4.98 +12.70 K +6.58 -11.94 i +6.38 -7.98 GG -3.73 +5.66 R -10.77 -8.28 r +4.37 0.00 B +7.98 +11.05 L +3.40 -13.18 j +3.38 -9.63 HH 0.00 +5.08 S -12.52 -5.21 s +4.37 -4.37 C +10.49 +8.71 M 0.00 -13.64 k 0.00 -10.21 JJ +2.67 +2.39 T -13.49 -1.75 t 0.00 -4.37 D +12.32 +5.84 N -3.40 -13.18 m -3.38 -9.63 KK +3.43 -1.04 U -13.49 +1.75 u -4.37 -4.37 E +13.39 +2.57 P -6.58 -11.94 n -6.38 -7.98 LL 0.00 -3.35 V -12.52 +5.21 v -4.37 0.00 F +13.61 -0.76 R -9.35 -9.93 p -8.66 -5.41 MM -3.43 -1.04 W -10.77 +8.28 w -2.18 +4.37 G +12.98 -4.17 S -11.53 -7.29 q -9.96 -2.24 NN -2.67 +2.39 X -8.23 +10.80 x 0.00 0.00 H +11.53 -7.29 T -12.98 -4.17 r -10.13 +1.17 PP 0.00 0.00 Y -5.16 +12.57 J +9.35 -9.93 U -13.61 -0.76 s -9.19 +4.45 (c) 2012 - SOURIAU 49 8ST Series Range Extension 8STA Series & 8STA derived Series ............................................................................................ 52 847/848 Series ................................................................................................................................. 53 VGE1 Series ....................................................................................................................................... 53 micro38999 Series ......................................................................................................................... 54 851 Series .......................................................................................................................................... 54 Range Extension Product range extension 8STA Series T ble 8Sate a m r inte 8STA 8STA Series circular connectors are derived from international military specifications MIL-DTL-38999 and JN1003. Dedicated to Motorsport markets, 8STA Series connectors are designed to withstand high levels of shock and vibration in harsh environments. The world smallest and most popular connector: . 8STA Series Size 02. . Miniature lightweight connector. . Ideal for areas where space is a premium. Versatility: . Removable crimp contacts. . Available with PCB contacts. User friendly: . Quick bayonet locking. . Integrated backshell . Visual color indication when mated. . Up to 7 color coded keyway orientations. See Compact CIrcular Connectors 8STA/8TA Series catalog on www.souriau.com 8STA Derived Series One of the primary objectives with 8STA Series family is to push the boundaries of innovation ! Continuing on with this theme, many new 8STA products are developped by SOURIAU teams. Blind mating plug: . Quick connection in hard-to-reach areas. . Compensating misalignment in 3 axes. Steering boss system: . Quick release. Hermetic & fuel tank version: . Excellent hermeticity and corrosion resistance. . Resistance to racing fuels and fluids. Integrated clinch nuts: . Elimination of nut plates - convenient, weight and time saving. High density layouts and power contacts available. 52 (c) 2012 - SOURIAU See Compact CIrcular Connectors 8STA/8TA Series catalog on www.souriau.com Range Extension Product range extension 847/848 Series Especially designed for light and harsh environment. Its physical characteristics and performances are appreciated in a large range of applications: military ground equipment, heavy weapons, ... Environment friendly: . RoHS black zinc nickel: 848 Series. . 500 hours salt spray. Safety: . DIN EN 60664-1 (VDE 0110-1) approved. Reliable: . Robust circular aluminum connector. . Power supply up to 63A ( DC to 3 phase AC ) . Large variety of backshells and wide range of wire gauges and current carrying capabilities. See 847/848 Series - Power Supply up to 63A product news on www.souriau.com Standards: . VG96918 approved and qualified. VGE1 Series The solution for outdoor/indoor data transmission in harsh environments. Ruggedised bayonet connection. Signal and Quadrax layouts. Tested following NF F 61-030 Quick coupling: . Bayonet coupling. Suitable for indoor applications: . Flame retardant material. High corrosion resistance: . 500 hours salt spray resistant. 4 layouts with standard #16 contacts: . 10, 19, 37, 60 contacts. See VGE1/FER1 Series - Railway Connectors catalog on www.souriau.com (c) 2012 - SOURIAU 53 Range Extension Product range extension A complete miniature range: threaded (8DA), break away (8BA) & bayonet (8LTA). Space saving with scoop proof connector for harsh applications. A compact solution: . Diameter up to 45% smaller than size 9 (D38999). . Up to 50% shorter. . Integrated backshell: Cost and space saving. A high density solution: . With #26 contacts (according to 39029). . 5 layouts (size 3, 5 and 7 with #22 & #26). Excellent features: . Designed for D38999 requirements. . IP67 sealing when mated. . Stainless steel shell (1500 matings) & aluminum shell (500 matings). RoHS and Cadmium free: . Available in zinc nickel (RoHS) plating, as well as nickel and olive drab cadmium. See micro38999, A Complete Miniature Range catalog on www.souriau.com 851 Series Designed to ensure reliable and rapid electrical connections thanks to a bayonet locking system. General characteristics and lightweight compact size contribute to successful adoption in numerous applications. High corrosion resistance: . 500 hours salt spray. Quick coupling: . Bayonet coupling (1/3 turn). Polarization: . Five keys. EMC requirements: . Shielded plug available. Endurance: . 500 mating cycles. 54 (c) 2012 - SOURIAU See 851 Series - MIL-DTL-26482 Connectors catalog on www.souriau.com contactmilaero@souriau.com Connection Technologies (c) Copyright SOURIAU October 2012 - All information in this document presents only general particulars and shall not form part of any contract. All rights reserved to SOURIAU for changes without prior notification or public announcement. Any duplication is prohibited, unless approved in writing. www.souriau.com