Connection Te chnologies
8ST Series
VG96912 & JN1003
8ST Series
VG96912 & JN1003
3
© 2012 - SOURIAU
• 8ST Series - Presentation .............................................. 06
• 8ST Series - Applications .............................................. 06
• A universal product platform ....................................... 07
• Contact layouts ................................................................. 08
• Contact layouts (matrix) .................................................. 12
• Cross reference list .......................................................... 14
• Technical features ............................................................ 18
• Ordering information ...................................................... 19
• Dimensions ........................................................................ 21
• Panel cut-out ..................................................................... 24
• Mated/unmated dimensions ........................................ 24
• Receptacle with straight PC tail contacts ................. 25
• Straight PC tail contacts ................................................. 28
• Crimp contacts ................................................................. 29
• Coaxial contacts #12 ...................................................... 30
• Solder cup .......................................................................... 30
• Quadrax #8 contacts ..................................................... 30
• Wire wrap contacts ......................................................... 31
• Thermocouple contacts ................................................ 31
• Dummy contacts .............................................................. 32
• Filler plugs .......................................................................... 32
• Wiring instructions ........................................................... 33
• Crimping tools .................................................................. 34
• Insertion & extraction tools .......................................... 35
• Backshell tightening tools ............................................. 35
• Tightening support .......................................................... 35
• Slackening tools ............................................................... 35
• Backshells .......................................................................... 38
• Protective caps ................................................................. 39
• Dummy receptacles ........................................................ 40
• Panel gasket ...................................................................... 40
• Reductors ........................................................................... 41
• Boots .................................................................................... 41
• Orientations ....................................................................... 41
• Coordinates information ................................................ 42
• 8STA Series & 8STA derived Series ........................... 52
• 847/848 Series ................................................................ 53
• VGE1 Series ...................................................................... 53
• micro38999 ...................................................................... 54
• 851 Series .......................................................................... 54
Contents
Overview
Contacts & Tooling
Standard Version Common Section
Range Extension
8ST Series
Overview
06
06
07
08
12
14
8ST Series - Presentation ..............................................................................................................
8ST Series - Applications ..............................................................................................................
A universal product platform: MIL-DTL-38999 .....................................................................
Contact layouts ................................................................................................................................
Contact layouts (matrix) .................................................................................................................
Cross reference list .........................................................................................................................
8ST Series
8ST Series
VG96912 & JN1003
6© 2012 - SOURIAU
8ST Series - Presentation
8ST Series - Applications
Derived from MIL-C-38999 Series I and II and incorporates
lightweight, scoop proof and high contact density features.
The design, performance and mechanical robustness of this
product meet the requirements of the following applications:
• Military, aerospace,
• Ballistic missiles and weapon systems,
• Marine equipment.
8ST connector features include:
• A very high contact density,
• MIL-DTL-38999 Series I contact layouts,
• The male contacts are recessed into the body to prevent damage by mismating (100% scoop proof),
• Keyway polarization (master keyway),
• RFI-EMI shielding and shell to shell continuity,
• Receptacle fixings and backshells as per pattern 602 and MIL-C-26482 Series II.
The plug and receptacle bodies, as the endbells, are manufactured from aluminum alloy and protected by
cadmium or nickel plating. The shells are locked together by a bayonet coupling mechanism. Gold plated crimp
or straight PC tail contacts are extracted from connector rear and are retained in the insulator by a metal clip.
• Civil and Military Aerospace
• Marine Equipments
• Communications Equipements
• Medical Instrumentation
• Ballistic Missiles & Weapon Systems
• Armored Carriers & Tanks
• Test Equipments
VG96912 & JN1003
8ST Series
VG96912 & JN1003
7
© 2012 - SOURIAU
A universal product platform: MIL-DTL-38999
38999 Series III: 8D Series
► High density MIL-spec circular (1980’s)
► Scoop proof, fast screw coupling
► Composite light-weight version available
► QPL approved
► Titanium version, light-weight, mechanical
and environnemental performances
► Quadrax and Elio version
► Specific versions (clinch nuts, double flange,
high power, hermetic, ...)
38999 Series II: 8T Series
► Short version of MIL-DTL-38999 Series I
► Low profile = lightweight
► High density MIL-spec circular (1980’s)
► Non-scoop proof, bayonet coupling
► Method of mounting: screws or jam nut
► Shell: Aluminum alloy
► Plating: cadmium, nickel, hard anodized
► QPL approved
► Numerous layouts
38999 Series I: 8LT Series
► High density (#22D) MIL-spec circular
► Scoop proof
► Coupling system: Bayonet
► Method of mounting: screws or jam nut
► Shell: Aluminum alloy
► Plating: olive green cadmium, black zinc
nickel or nickel
► QPL approved
► Numerous layouts
8ST Series
VG96912 & JN1003
8© 2012 - SOURIAU
Contact #26 & #22D
Contact #20
Contact #16
Contact #12
Contact #10
Contact #8
Contact #8 Power
Contact #8 Quadrax
Contact #4 Power
Contact layouts
08
35
6#22D
Service M
98
3#20
Service I
10
01 02 04 05
1#12
Service II
2#16
Service I
4#20
Service I
5#20
Service I
98 99
6#20
Service I
7#20
Service I
35 80
13#22D
Service M
1#8 Triax
Service I
12
03 04 08 26 35 98
3#16
Service I
4#16
Service I
8#20
Service I
2#12
6#22D
Service M
22#22D
Service M
10#20
Service I
12
12#26
Service R
HD
Ethernet Quadrax High Density layout
HD
26
26#26
Service R
HD
43
43#26
Service R
HD
81
1#8 Quadrax
8ST Series
VG96912 & JN1003
9
© 2012 - SOURIAU
Contact layouts
Ethernet Quadrax * Available on specic request. Please consult us.
14
5#16
Service II
1#16
14#20
Service I
18
18#20
Service I
19
19#20
Service I
35 97
37#22D
Service M
4#16
8#20
Service I
05 15
16
02 06* 08 22 26 35 75
38#22D
1#8 Triax
Service M
6#12
Service I
8#16
Service II
4#12
16#22D
Service M
2#12
2#8 Triax
Service M
26#20
Service I
55#22D
Service M
2#8 Triax
Service M
9982
2#12
2#8 Quadrax
38#22D
1#8 Quadrax
2#8 Quadrax 2#16
21#20
Service I
20*
8180
18
1811 28 32 35
11#16
Service II
14#22D
4#8 Triax
Service M
26#20
2#16
Service I
32#20
Service I
66#22D
Service M
14#22D
4#8 Quadrax
84
8ST Series
VG96912 & JN1003
10 © 2012 - SOURIAU
Contact layouts
Ethernet Quadrax
20
11#12
Service I
16#16
Service II
35
79#22D
Service M
39 41
2#16
37#20
Service I
41#20
Service I
11 16 42 48
2#4 Power
Service I
4#8 Power
Service I
75
4#8 Triax
Service M
77
17#22D
2#8 Triax
Service M
17#22D
2#8 Quadrax
2#4 Power
6#16
Service I
72
22
21#16
Service II
32#20
Service I
35
100#22D
Service M
53
53#20
Service I
54 55
4#12, 9#16
40#22D
Service M
55#20
Service I
21 32
78
4#8 Quadrax
84
8ST Series
VG96912 & JN1003
11
© 2012 - SOURIAU
Contact layouts
24
8#16
48#20
Service I
2#8 Triax
97#22D
Service M
08*
8#8 Triax
Service M
19
19#12
Service I
04 07 24
12#16
12 # 12
Service I
37
37#16
Service I
41
22#22D, 3#20
11#16, 2#12
3#8 Triax
Service M
43 44
23#20
20#16
Service I
4#4 Power
4#16
Service I
46
40#20, 4#16
2#8 Coax
Service I
40#20
4#16
2#8 Quadrax
90
40#20, 4#16
2#8 Twinax
Service I
86
29#16
Service I
29
128#22D
Service M
35
22#22D
3#20, 11#16
2#12
3#8 Quadrax
97#22D
2#8 Quadrax
81 82
61#20
Service I
61
Ethernet Quadrax * Available on specic request. Please consult us.
8ST Series
VG96912 & JN1003
12 © 2012 - SOURIAU
Shell
Size Layout Service 8ST VG96912
JN1003 Nber of
Contacts #26 #22D #20 #16 # 12 #10 # 8 #4
Power
8ST2*034 Other P/N
08
08-12 R 312 12
08-35 M3QQQ6 6
08-98 I 3Q Q 3 3
10
10-01 II 31 1
10-02 I 3Q2 2
10-04 I 34 4
10-05 I 35 5
10-26 R 326 26
10-35 M3QQQ13 13
10-80 I 3Q11 Triax
10-81 - 311 Qdx
10-98 I 3QQQ6 6
10-99 I 37 7
12
12-01 3
12-03 I 33 3
12-04 I 3Q4 4
12-08 I 38 8
12-26 M38 6 2
12-35 M3QQQ22 22
12-43 R 343 43
12-98 I 3QQQ10 10
14
14-05 II 3Q5 5
14 - 15 I315 14 1
14-18 I 318 18
14-19 I 3QQQ19 19
14-35 M3QQQ37 37
14-97 I 3QQQ12 8 4
16
16-02 M339 38 1 Triax
16-06 I 3Q Q 6 6
16-08 II 3Q Q 8 8
16-20 M320 16 4
16-22 M34 2 2 Triax
16-26 I 3Q Q 26 26
16-35 M3QQQ55 55
16-75 M322 Triax
16-80 - 34 2 2 Qdx
16-81 - 339 38 1 Qdx
16-82 - 322 Qdx
16-99 I 3Q23 21 2
18
18-11 II 3Q Q 11 11
18-18 M318 14 4 Triax
18-28 I 328 26 2
18-32 I 3Q Q 32 32
18-35 M3QQQ66 66
18-84 - 318 14 4 Qdx
Contact layouts (matrix)
3Souriau’s layout
QQualied layout according corresponding norm
#8 Qdx: Quadrax
8ST Series
VG96912 & JN1003
13
© 2012 - SOURIAU
Shell
Size Layout Service 8ST VG96912
JN1003 Nber of
Contacts #26 #22D #20 #16 # 12 #10 # 8 #4
Power
8ST2*034 Other P/N
20
20-11 I 3Q11 11
20-16 II 3QQQ16 16
20-35 M3QQQ79 79
20-39 I 339 37 2
20-41 I 3Q Q 41 41
20-42 I 32 2
20-48 I 344 Pow
20-72 I 38 6 2
20-75 - 3Q44 Triax
20-77 M319 17 2 Triax
20-78 - 319 17 2 Qdx
20-84 - 344 Qdx
22
22-21 II 3Q Q 21 21
22-32 I 332 32
22-35 M3QQQ100 100
22-53 I 3Q53 53
22-54 M353 40 9 4
22-55 I 355 55
24
24-04 I 356 48 8
24-07 M399 97 2 Triax
24-08 - 388 Triax
24-19 I 3Q Q 19 19
24-24 II 324 12 12
24-29 I 329 29
24-35 M3QQQ12 8 12 8
24-37 I 337 37
24-41 N 341 22 3 11 23 Triax
24-43 I 343 23 20
24-44 I 38 4 4
24-46 I 346 40 4 2 Coax
24-61 I 3Q Q 61 61
24-81 N 341 22 3 11 23 Qdx
24-82 M399 97 2 Qdx
24-86 I 346 40 4 2 Qdx
24-90 I 346 40 4 2 Triax
Contact layouts (matrix)
3Souriau’s layout
QQualied layout according corresponding norm
#8 Pow: Power; Qdx: Quadrax
8ST Series
VG96912 & JN1003
14 © 2012 - SOURIAU
SOURIAU VG96912 EN3372* JN1003 (EFA)* Designation
Connectors
8ST0••G••P/SN
8ST0••F/B••P/SN
8ST0••B••P/SN034
8ST0••B••A/BN034
VG96912A••••P/SN
-
-
-
-
EN3372F/W0••N••P/SN
-
-
-
-
JN1003B••••P/SN1
JN1003B••••P/SN
Square ange
receptacle
8ST1••F/G••P/SN ---In line receptacle
8ST2••B••P/SN034
8ST2••F••A/BN034
-
-
-
-
JN1003H••••P/SN1
JN1003H••••P/SN
Mounting box
receptacle
8ST5••G••P/SN
8ST5••F/B••P/SN
8ST5••B••P/SN034
8ST5••B••A/BN034
VG96912D••••P/SN
-
-
-
-
EN3372F/W6••N••P/SN
-
-
-
-
JN1003FG••••P/SN1
JN1003FG••••P/SN
Plug with EMI/RFI shielding
8ST6••G••P/SN
8ST6••F/B••P/SN
VG96912E••••P/SN
-
-
-
-
-
Plug without EMI/RFI
shielding
8ST7••G••P/SN
8ST7••F/B••P/SN
8ST7••B••P/SN034
8ST7••F/B••A/BN034
VG96912B••••P/SN
-
-
-
-
EN3372F/W7••N••P/SN
-
-
-
-
JN1003A••••P/SN1
JN1003A••••P/SN
Jam nut
receptacle
Cross reference list
VG: approval n°307/84
Pr EN3372
JN1003: full qualication under process.
* Please consult us, our product will be evaluated against the nal drafts/standards when available.
SOURIAU VG96912 EN3372* JN1003 (EFA)* Designation
Contacts
8599-0702 JJ
8599-0703 SA
8599-0704 MJ
8599-0705 MJ
VG96912P22 D
VG96912P20
VG96912P16
VG96912P12
Separate EN
standard in
progress
-
-
-
-
Crimp male contact #22D
Crimp male contact #20
Crimp male contact #16
Crimp male contact #12
8599-0706 900
8599-0707-900
8599-0708-900
8599-0709-900
VG96912S22D1
VG96912S201
VG96912S161
VG96912S121
Separate EN
standard in
progress
-
-
-
-
Crimp female contact #22D
Crimp female contact #20
Crimp female contact #16
Crimp female contact #12
M39029/58-360
M39029/58-363
M39029/58-364
M39029/58-365
-
-
-
-
-
-
-
-
JN1003P22D
JN1003P20
JN1003P16
JN1003P12
Crimp male contact #22D
Crimp male contact #20
Crimp male contact #16
Crimp male contact #12
M39029/58-348
M39029/58-351
M39029/58-352
M39029/58-353
-
-
-
-
-
-
-
-
JN1003S22D
JN1003S20
JN1003S16
JN1003S12
Crimp female contact #22D
Crimp female contact #20
Crimp female contact #16
Crimp female contact #12
* Please consult us, our product will be evaluated against the nal drafts/standards when available.
8ST Series
VG96912 & JN1003
15
© 2012 - SOURIAU
SOURIAU VG96912 EN 3372* JN1003 (EFA)* Designation
Backshells
8LST101B52 (shell size 08)
8LST102B52 (shell size 10)
8LST103B52 (shell size 12)
8LST104B52 (shell size 14)
8LST105B52 (shell size 16)
8LST106B52 (shell size 18)
8LST107B52 (shell size 20)
8LST108B52 (shell size 22)
8LST109B52 (shell size 24)
-
VG96912G110
VG96912G112
VG96912G114
VG96912G116
VG96912G118
VG96912G120
VG96912G122
VG96912G124
Separate EN
standard in
progress
Straight endbell
cable clamp
8LST101B57 (shell size 08)
8LST102B57 (shell size 10)
8LST103B57 (shell size 12)
8LST104B57 (shell size 14)
8LST105B57 (shell size 16)
8LST106B57 (shell size 18)
8LST107B57 (shell size 20)
8LST108B57 (shell size 22)
8LST109B52 (shell size 24)
-
VG96912L110
VG96912L112
VG96912L114
VG96912L116
VG96912L118
VG96912L120
VG96912L122
VG96912L124
Separate EN
standard in
progress
Endbell for
shielding braids
* Please consult us, our product will be evaluated against the nal drafts/standards when available.
Cross reference list
VG: approval n°307/84
Pr EN3372
JN1003: full qualication under process.
8ST Series
Standard Version
18
19
21
24
24
25
Technical features ...........................................................................................................................
Ordering information ......................................................................................................................
Dimensions .......................................................................................................................................
Panel cut-out .....................................................................................................................................
Mated/unmated dimensions ........................................................................................................
Receptacle with straight PC tail contacts .................................................................................
8ST Series
8ST Series
VG96912 & JN1003
18 © 2012 - SOURIAU
Description
• A high density connector from 1 to 128
contacts for all military and aeronautical
purposes.
• Contact sizes #22D, #20, #16, #12,
#16 coax, #8 triax, #8 and #4 power
• Bayonet locking system
• MIL-DTL-38999 Series I contact layouts
• 100% scoop proof
• EMI/RFI shielding and shell-to-shell
continuity
• Standards: JN 1003, VG 96912,
pr EN 3372, EFA J 62-017
Technical features
Mechanical
• Shell: aluminum alloy
• Plating: . black zinc nickel (Z)
. olive green cadmium (G)
. olive green cadmium, spec. 034
500 hours salt spray (B)
. nickel (F)
• Insulator: thermoplastic or metallic version
available for specication 284 & 384
• Grommet or seal: liquid silicone rubber or
uorocarbone elastomer for specication 022
• Contact: copper alloy
• Plating contact: gold over nickel
• Endurance: 500 mating/unmating operations
• Shock: 300 g during 3 ms and as per
MIL S 901 grade A
• Vibration: 147 m/s², 10 to 2000 Hz
• Contact retention (min force in N):
Electrical
• Test voltage (Vrms)
• Insulation resistance:
≥ 5 000 MW at 500 VAC
• Contact resistance:
• Contact rating:
• Shell continuity:
. black zinc nickel: 2.5 mΩ
. olive green plating: 2.5 mΩ
. nickel plating: 1 mΩ
• Shielding: 70 db at 0.01 to 100 MHz
• Electrical continuity between contact and
shell for specication 284 & 384: 10 mΩ
max
Climatic
• Temperature range:
. black zinc nickel plating (Z)
- 65°C +175°C
. olive green cadmium plating (B or G)
- 65°C +175°C
. nickel plating (F)
- 65°C +200°C
• Sealing, mated connectors: Differential
pressure 2 bars leakage ≤16 cm3/h
• Salt spray as per:
. MIL STD 1344 method 1001:
- 500 hours (plating B, G and Z)
- 48 hours (plating F)
. NFC 93422 :
- 48 hours (plating F)
• Resistance to uids
. As per MIL-DTL-38999:
MIL-L-7808, MIL-L-23699, MIL-H-5606,
MIL-A-8243, MIL-C-25769, MIL-T-5624
(JP5), hydraulic uids, solvants
. Specication 022 for fuel immersion
(please consult us)
Service sea level at 21000 m
R 400 N/A
M1 300 800
N 1 000 600
I 1 800 1 000
II 2 300 1 000
Contacts size 26 22 20 16 12 8 4
Resistance mΩ16 14.6 7. 3 3.8 3.5 3 2
Contacts size 26 22 20 16 12 8 4
Rating (A) 357. 5 13 23 45 80
Contacts size 22 20 16 12 8 4
Min force in N 45 67 111 111 11 0 200
8ST Series
VG96912 & JN1003
19
© 2012 - SOURIAU
Ordering information
Basic series 8ST 0 - 10 G 35 P N
Shell style
0: Square ange receptacle
1: In line receptacle
2: Square ange receptacle, not accepting backshell
3: Square ange receptacle, rear mounting
5: Plug with RFI/EMI shielding
6: Plug without RFI/EMI shielding
7: Jam nut receptacle
Type
-: Connector with standard crimp contacts
L: Connector with long PC tail contacts
M: Connector with medium PC tail contacts
C: Connector with short PC tail contacts
Shell size
08; 10; 12; 14; 16; 18; 20; 22; 24
Plating
Z: Black zinc nickel
F: Nickel
G: Olive green cadmium
B: Olive green cadmium - spec. 034 mandatory, see specication below
Contact layout
See pages 8 to 13
Contact type
P: Pin
S: Socket
A: Connector supplied without pin contact
B: Connector supplied without socket contact
Orientation
N, A, B, C, D - See page 41; Orientations B & C not developped for shell size number 8
Specications
None: Supplied with contact
034: As per JN1003 Standard - B type plating only, 500 hours salt spray
046: PC Tail contact with tinned plating
251: Connector provided with #8 power contacts instead of #8 triax contacts
022: Fuel tank - Please consult us
SOURIAU part numbers
8ST Series
VG96912 & JN1003
20 © 2012 - SOURIAU
JN1003 part numbers
Basic series JN1003 B12 - 35 P N 1
Shell style
A: Jam nut receptacle
B: Square ange receptacle
FG: Plug with RFI/EMI shielding
H: Square ange receptacle, not accepting backshell
Shell size
08; 10; 12; 14; 16; 18; 20; 22; 24
Plating
-: Olive green cadmium
Contact layout
See pages 8 to 13
Contact type
P: Pin
S: Socket
Orientation
N, A, B, C, D - See page 41; Orientations B & C not developped for shell size number 8
Specication
None: Delivered without contact - crimp version
1: Delivered with crimp contacts
101: Short PC tail contacts (#22D, #20, #16 male & female for receptacle type A and B)
102: Medium PC tail contacts (#22D male for receptacle B ; #22D and #20 female for receptacle type A)
103: Long PC tail contacts (#22D male & female for receptacle type B)
104: Short PC tail contacts HE308 type (#22D male & female for receptacle type B)
Basic series VG96912 D10 - 35 P N
Shell type
A: Square ange receptacle
AA: Square ange receptacle, rear mounting
B: Jam nut receptacle
D: Plug with RFI/EMI shielding
E: Plug without RFI/EMI shielding
Shell size
08; 10; 12; 14; 16; 18; 20; 22; 24
Plating
-: Olive green cadmium
Contact layout
See pages 8 to 13
Contact type
P: Pin
S: Socket
Orientation
N, A, B, C, D - See page 41; Orientations B & C not developped for shell size number 8
VG96912 part numbers
Ordering information
8ST Series
VG96912 & JN1003
21
© 2012 - SOURIAU
Types 5 & 6 - Plug
Dimensions
Note: All dimensions are in millimeters (mm)
ØA
Thread
32 Max.
Shell
size A Thread
08 19 7/16-28 UNEF 2A
10 22 9/16-24 UNEF 2A
12 26 11/16-24 UNEF 2A
14 29 13/16-20 UNEF 2A
16 33 15/16-20 UNEF 2A
18 36 1’’1/16-18 UNEF 2A
20 39 1’’3/16-18 UNEF 2A
22 44 1’’5/16-18 UNEF 2A
24 46 1’’7/16-18 UNEF 2A
Type 7 - Jam nut receptacle
A
B
C
Thread
E
F
ØD
23.24±0.13 9.86
Max.
Shell size A +0 BC Thread ØD E ±0.3 F ±0.4 Tightening torque
for JN1003 (mN)
08 13.46
2.43 /
3.09
1.6 /
3.2
9/16-24 UNEF 2A 27. 3 23.8 19.1 4
10 16.64 11/16-24 UNEF 2A 30.5 2 7. 0 22.2 6
12 20.78 13/16-20 UNEF 2A 35.3 31.8 27. 0 9
14 23.93 15/16-20 UNEF 2A 38.4 34.9 30.2 10
16 27.08 1’’1/16-18 UNEF 2A 41.6 38.1 33.3 13
18 30.25
3.23 /
3.89
1’’3/16-18 UNEF 2A 44.8 41.3 36.5 20
20 33.43 1’’5/16-18 UNEF 2A 49.6 46.0 39.7 23
22 36.60 1’’7/16-18 UNEF 2A 52.7 49.2 42.7 25
24 39.78 1’’7/16-18 UNEF 2A 55.9 52.4 46.0 26
-0.2
8ST Series
VG96912 & JN1003
22 © 2012 - SOURIAU
Note: All dimensions are in millimeters (mm)
Type 0 - Square ange receptacle
AB
C
Thread
E
F
ØD
Type 1 - In line receptacle
Shell size A +0 B Min. C Thread ØD ±0.13 E ±0.4 F ±0.1
08
16.05
11.8
2.16 /
2.42
7/16-28 UNEF 2A
3.05
20.6 15.1
10 9/16-24 UNEF 2A 23.8 18.3
12 11/16-24 UNEF 2A 26.2 20.6
14 13/16-20 UNEF 2A 28.6 23.0
16 15/16-20 UNEF 2A 31.0 24.6
18 1’’1/16-18 UNEF 2A 33.3 27. 0
20
15.29 2.92 /
3.18
1’’3/16-18 UNEF 2A 36.5 29.4
22 1’’5/16-18 UNEF 2A 39.7 31.8
24 1’’7/16-18 UNEF 2A 3.73 42.9 34.9
-0.2
AB
C
Thread
E
ØD
Shell size A +0 B Min. C Thread ØD ±0.1 E ±0.4
08
16.05
11.8
2.16 /
2.42
7/16-28 UNEF 2A 7.45 14.2
10 9/16-24 UNEF 2A 10.7 18.5
12 11/16-24 UNEF 2A 13.6 21.8
14 13/16-20 UNEF 2A 16.75 25.2
16 15/16-20 UNEF 2A 19.95 27. 4
18 1’’1/16-18 UNEF 2A 22.2 31.0
20
15.29 2.92 /
3.18
1’’3/16-18 UNEF 2A 25.35 34.2
22 1’’5/16-18 UNEF 2A 28.55 37. 6
24 1’’7/16-18 UNEF 2A 31.7 41.6
-0.2
8ST Series
VG96912 & JN1003
23
© 2012 - SOURIAU
Note: All dimensions are in millimeters (mm)
Type 3 - Square ange receptacle (rear mounting)
Type 2 - Square ange receptacle (not accepting backshell)
AB
C
E
F
ØD
-0.2
AB
C
E
F
ØD
Thread
Shell size A +0 B Min. C Thread ØD ±0.13 E ±0.4 F ±0.1
08
21.84 13.5 2.16 /
2.42
7/16-28 UNEF 2A
3.05
20.6 15.1
10 9/16-24 UNEF 2A 23.8 18.3
12 11/16-24 UNEF 2A 26.2 20.6
14 13/16-20 UNEF 2A 28.6 23.0
16 15/16-20 UNEF 2A 31.0 24.6
18 1’’1/16-18 UNEF 2A 33.3 27. 0
20 1’’3/16-18 UNEF 2A 36.5 29.4
22 1’’5/16-18 UNEF 2A 39.7 31.8
24 25.4 12.3 1’’7/16-18 UNEF 2A 3.73 42.9 34.9
-0.2
8ST Series
VG96912 & JN1003
24 © 2012 - SOURIAU
Note: All dimensions are in millimeters (mm)
Panel cut-out
Type 7
ØD
E
Types 0, 2 & 3
ØA
B
ØC
B
Shell
size
Types 0, 2 & 3 Type 7
ØA +0.25
BØC +0.25 ØD +0.25 E +0.25
Back panel
mounting
Front panel
mounting
08 14 12.7 15.1
3.5
14.5 13.6
10 17 16 18.3 17 . 7 16.8
12 22 19 20.6 22.7 20.9
14 25 22.2 23.0 25.7 24.1
16 28 25.5 24.6 28.8 27. 2
18 31 28.5 27. 0 32.0 30.4
20 34.5 31.7 29.4 35.1 33.6
22 37. 5 35 31.8 38.4 36.8
24 41 38 34.9 4 41.5 39.9
-0
-0 -0 -0
Mated/unmated dimensions
Types 8ST5 & 8ST6
with types 8ST0/8ST1/8ST2
Shell size A Max. B Max. C Max. D Max. E Max. F Max.
08
31.93 46.99
37. 7 2 52.78
39.24 54.30
10
12
14
16
18
20
31.17 46.2322
24 41.28 56.34
A
B
A
B
A
B
Types 8ST5 & 8ST6
with type 8ST3
Types 8ST5 & 8ST6
with type 8ST7
8ST Series
VG96912 & JN1003
25
© 2012 - SOURIAU
Note: All dimensions are in millimeters (mm)
Receptacle with straight PC tail contacts
ØA
B
L
8ST0
C
L
ØA
8ST5
D
L
ØA
8ST7
Contact style Shell type
Size Type Length 8ST0/8ST5 8ST7
ØA
Max.
#22D / #20 P / S L / C 0.7 -
P / S C - 0.66
#22D P M 0.5 0.66
#20 SM- 0.66
#16 P L 1.66 -
#16 P / S C 1.15 1.15
# 12 P / S C 2.06 -
L
#22D / #20 P / S L 8.5 +0 -
#16 P L 5.3 ±0.1 -
#22D P / S C 4 +0 -
#20 / #16 / #12 P / S C 5 ±0.1 -
#22D P M 6 ±0.1 6.5 +0
#22D / #20 / #16 P / S C - 4 ±0.1
#20 SM- 6.5 ±0.1
B
#22D P / S L / C 14.07 / 15.06
P M 14.24 / 15.23
#20 P / S L 14.07 / 15.06
C 14.24 / 15.23
#16 P L 18.62 / 19.61
#16 / #12 P / S C 14.24 / 15.23
C
#22D P / S L / C 1.43 / 2.23
P M 1.60 / 2.40
#20 P / S L 1.43 / 2.23
C 1.60 / 2.40
#16 P L 5.98 / 6.78
#16 / #12 P / S C 1.60 / 2.40
D
#22D P M 13.86 / 14.86
#20 SM 13.86 / 14.86
#22D / #20 / #16 P / S C 14.79 / 15.79
-0.2
-0.2
-0.2
8ST Series
Contacts & Tooling
28
29
30
30
30
31
31
32
32
33
34
35
35
35
35
35
Contacts:
Straight PC tail contacts ..........................................................................................................
Crimp contacts ..........................................................................................................................
Coaxial contacts #12 ...............................................................................................................
Solder cup ...................................................................................................................................
Quadrax #8 contacts ...............................................................................................................
Wire wrap contacts ...................................................................................................................
Thermocouple contacts ..........................................................................................................
Dummy contacts .......................................................................................................................
Filler plugs ...................................................................................................................................
Wiring instructions ..........................................................................................................................
Tooling:
Crimping tools ............................................................................................................................
Insertion & extraction tools .....................................................................................................
Backshell tightening tools ......................................................................................................
Tightening support .....................................................................................................................
Slackening tools ........................................................................................................................
Tightening of xing nuts, receptacle type 7 ......................................................................
8ST Series
8ST Series
VG96912 & JN1003
28 © 2012 - SOURIAU
Straight PC tail contacts
Shell
type
Contact
length
Contact
size
Contact
type
SOURIAU Part Number
(no color code) Prole
8ST0
8ST5
L
#22D
P8599-0720
S 8599-0721
#20
P8599-0771
S 8599-0772
#16 P 8599-7496A
C
#22D
P8599-0730
S 8599-0731
#20
P8599-0724
S 8599-0725
#16
P8599-0726
S 8599-0727
# 12
P8599-7929
S 8599-7932
M#22D P 8599-8028
8ST7
C
#22D
P8599-0779
S 8599-0788
#20
P8599-0780
S 8599-0789
#16
P8599-7711
S 8599-7710
M
#22D P 8599-0728
#20 S 8599-0786
8ST Series
VG96912 & JN1003
29
© 2012 - SOURIAU
Contact
size
Contact
type
SOURIAU P/N
(no color code) QPL Part Number Prole and color code
#22D
P8599-0702 JJ M39029/58-360 Black / Blue / Orange
S 8599-0706 900 M39029/56-348 Grey / Yellow / Orange
#20
P8599-0703 SA M39029/58-363 Orange / Blue / Orange
S 8599-0707 900 M39029/56-351 Brown / Green / Orange
# 16
P 8599-0704 MJ M39029/58-364 Yellow / Blue / Orange
S 8599-0708 900 M39029/56-352 Red / Green / Orange
# 12
P 8599-0705 MJ M39029/58-365 Green / Blue / Orange
S 8599-0709 900 M39029/56-353 Orange / Green / Orange
#8
Power
P8599-7560 - -
S 8599-7561 - -
#4
Power
P8599-7534 - -
S 8599-7535 - -
Crimp contacts
8ST Series
VG96912 & JN1003
30 © 2012 - SOURIAU
Coaxial contacts #12
Designation Part number
Coaxial socket solder #12 THA1-0151A
Coaxial pin solder #12 THA1-0152A
Coaxial pin crimp contact #12 THA1-0155A
Coaxial crimp contact #12 THA1-0156A
Quadrax #8 contacts
Contact type Version Souriau
Part number Cross Norm T° Impedance Sealing Release
Pin
PCB mount ETH1-1237A -125°C 100Ω
Sealed Rear
ETH1-1501A -150Ω
Crimp ETH1-1345A EN3155-074 200°C 100Ω
ETH1-1503A -150Ω
Socket
PCB mount ETH1-1238A -125°C 100Ω
ETH1-1502A -150Ω
Crimp ETH1-1346A EN3155-075 200°C 100Ω
ETH1-1504A -150Ω
Solder cup
For other contacts type please consult us.
Contact
size Contact type Part number
#22D Pin 8599-0750 900
#20 Pin 8599-0077A 900
# 16 Pin 8599-7482A 900
# 12 Socket 8599-7485A 900
8ST Series
VG96912 & JN1003
31
© 2012 - SOURIAU
Thermocouple contacts
Contact
size
Contact
type
Souriau
part number
(without color
code)
MIL-DTL-38999 contacts Ø
Contact
(mm)
Wire section Ø Over
insulation
(mm)
Part number Prole and color code Awg mm2
min max min max min max
#22D
Chromel
Pin -M39029/87-472
0.75 28 22 0.095 0.34 0.76 1.37
Socket -M39029/88-484
#22D
Alumel
Pin -M39029/87-471
Socket -M39029/88-483
#20
Chromel
Pin 8599-0749 900 8599-0949 900
1 24 20 0.21 0.6 1.02 2.11
Socket 8599-0753 900 8599-0953 900
#20
Alumel
Pin 8599-0761 900 8599-0961 900
Socket 8599-0765 900 8599-0965 900
Red / Violet / Yellow
Yellow / Grey / Yellow
Brown / Violet / Yellow
Orange / Grey / Yellow
Blue / Violet / Yellow
Grey / Grey / Yellow
Green / Violet / Yellow
Violet / Grey / Yellow
Wire wrap contacts
Contact
size
Contact
type Part number Contact Ø
(mm) Prole (mm)
#22D Pin 8599-0790 JJ 0.76 0.86
#20 Pin 8599-0791 900 1 0.86
8ST Series
VG96912 & JN1003
32 © 2012 - SOURIAU
Dummy contacts
Size Part number
# 16 8599-6A016001A
#8 8599-0308
#4 8599-0310
8599-0308
Filler plugs
Contact
size
Filler plugs
MS Part number
(Rev. N)
Souriau
Part number
JN1003 (EFA)*
Part number Color
#22D MS27488-22-2 8660-212 JN1003 N 22 Black
#20 MS27488-20-2 8522-389A JN1003 N 20 Red
# 16 MS27488-16-2 8522-390A JN1003 N 16 Blue
# 12 MS27488-12-2 8522-391A JN1003 N 12 Yellow
Direction of introduction in grommet
These ller plugs are installed at the rear of unwired
contact to maintain connector sealing.
* Please consult us, our product will be evaluated against the nal
drafts/standards when available.
8ST Series
VG96912 & JN1003
33
© 2012 - SOURIAU
Wiring instruction
Cable preparation and wire stripping
L = length of wire stripping
L
Contact
size #26 #22D #20 # 16 # 12 #8 #4
L4 6 12
Conductor
insulation
Barrel
Inspection holeWire
0.5 to 0.8 mm
Insertion of wire in contact barrel
When inserting the stripped wire into the contact barrel check that no
strands are left outside and that the wire is visible through the wire
inspection hole in the barrel.
Important:
- Slide any accessories over wire strands before carrying out the following operations.
- Contacts are inserted and extracted from the rear of the connector.
Insertion of the contacts
1 - Engage the crimp cable /
contact asembly into the
longitudinal slot of the plastic
tool (coloured tip).
Slide the tool down the
cable until the tip of the tool
abuts the contact retention
shoulder.
2 - Introduce the contact into
the required contact cavity
in the insulator, pushing tool
axialy, until the contact snaps
into position in clip.
3 - Withdraw the tool (from
rear). Check that contact is
rmly locked by pulling wire
gently.
When connector is fully
loaded, check the position of
contact tips. They should all
be in the same plane.
Nota: For larger sizes of
cable which are stiff enough
manual insertion without tool
is preferable.
1
2
3
Extraction of the contacts
1 - Engage the appropriate
cable into the longitudinal
slot of the tool with the white
tip towards connector.
2 - Slide the tool down
towards the contact. Insert
the tool in the insulator until
it abuts the contact shoulder.
3 - Holding the tool-contact
and cable assembly together,
remove them simultaneously.
1
2
3
8ST Series
VG96912 & JN1003
34 © 2012 - SOURIAU
Crimping tools
* Pneumatic plier
Note: for the #10 contact’s plier and locator, please consult us.
Contact
size
Contact
type
Plier
M22520/1-01
Plier
M22520/2-01
(Souriau 8476-01)
Plier
M300BT
Plier *
M22520/23-01
Turret Part number Locator Part number Locator
Part number
Turret
Part number
Locator
Part number
Norm Souriau Norm Souriau
#22D Pin - - M22520/2-09 8476-09 - - -
Socket - - M22520/2-07 8476-07 - - -
#20 Pin M22520/1-04 8365-04 M22520/2-10 8476-10
- - -
Socket - - -
# 16 Pin M22520/1-04 8365-04
- - - - -
Socket - - - - -
# 12 Pin M22520/1-04 8365-04
- - - - -
Socket - - - - -
#8 Power Pin ----
SP 593 M22520/23-02 8599-9601
Socket ----
#4 Power pin -----
M22520/23-04 M22520/23-11
Socket -----
Contact
size
Contact
type
Plier
M22520/2-01
(Souriau 8476-01)
Plier
M22520/31-01
Plier
M22520/4-01
Plier
M22520/5-01
Locator Part Number Locator Part number Locator Part Number Die set Part Number
#12 Coaxial
M39029/102-558
M39029/103-559
Inner ---
M22520/5-03
Outer ---
#12 Coaxial
M39029/28-211
M39029/75-416
Inner M22520/2-34 -
Outer -M22520/31-02 - -
#16 Coaxial Inner M22520/2-35 ---
Outer - - M22520/4-02 -
#8 Coaxial Inner M22520/2-31 ---
Outer ---M22520/5-05 closure B
#8 Triaxial
Inner K709 ---
Middle ---Y631 closure B
Ferrule ---Y631 closure A
Tooling
8ST Series
VG96912 & JN1003
35
© 2012 - SOURIAU
Tightening of xing nuts, receptacle type 7
Shell size 08 10 12 14 16 18 20 22 24
Nut dimension across ats 19.1 22.2 2 7. 0 30.2 33.3 36.5 39.7 42.7 46.0
Max tightening torque on nut (mN) 4 6 9 10 13 20 23 25 26
Tightening support
Part number: 8599-0803
This tool is made up of
dummy receptacles
housings of all 9 sizes for all
key polarisation, and locates
free connectors during wiring
and tting of rear accessories.
8599-0803
Backshell tightening tools
8498-03 Backshell tightening pliers,
part number: 8498-03
Square jaws (order 2 jaws),
part number: 8500-1015
Tightening of rear accessories:
Shell size 911 13 15 17 19 21 23 25
Max torque
in m/daN 0.62 1.24
Strap clamp,
part number: 8498-04
Spare strap,
part number: 8498-103
Slackening tools
8498-04
Insertion & extraction tools
Contact
size Material Part number Color
MIL standard Souriau Insertion Extraction
#26 Plastic - 8599-0399 900 Black White
#22D Plastic M81969/14-01 -Green White
#20 Plastic M81969/14-10 -Red Orange
# 16 Plastic M81969/14-03 -Blue White
# 12 Plastic M81969/14-04 -Yellow White
# 10 Plastic M81969/14-05 -Grey -
#8 Plastic M81969/14-12 - - Green
Metalic - 8660-197 - -
#4 Plastic M81969/14-07 - - Blue
Metalic - 8533-8175 - -
8ST Series
Common Section
38
39
40
40
41
41
41
42
Backshells ..........................................................................................................................................
Protective caps .................................................................................................................................
Dummy receptacles .......................................................................................................................
Panel gasket ......................................................................................................................................
Reductors ...........................................................................................................................................
Boots ...................................................................................................................................................
Orientations .......................................................................................................................................
Coordinates information ................................................................................................................
8ST Series
8ST Series
VG96912 & JN1003
38 © 2012 - SOURIAU
Note: All dimensions are in millimeters (mm)
Aluminum backshells
Ordering information
Shell size A Max B Max ØC Max ØD Max ØE ±0.2 F Min F Max G Max ØH Max J Max
08 24.8 34 14 6.4 19 1.58 3.18 14.7 16 20
10
25.8
35
16 7. 2 22 1.58 4.78 15.5 19 22
12 18 9.7 25 3.18 6.35 17 . 1 22 25
14
36
22 12.7 28 6.35 9.53 23.3 25 28
16
26.8
25 15.7 30 6.35 12.70
26.8
29 30
18 28 18.7 34 9.35 15.88 31 36
20 32 21.7 38 12.70 19.05 35 36
22 34 23.7 43 15.88 22.23 38 41
24 38 27. 7 45 15.88 25.40 41 43
Dimensions
Basic series 8LST 10 1 G 52
Size code:
101, 102, 103, 104, 105, 106, 107, 108, 109
Plating:
F: Nickel
G: Olive green cadmium
Type:
52: Backshell with cable clamp
57: Backshell for shielded cables and heatshrink boot
Size code 101 102 103 104 105 106 107 108 109
= Shell size 08 10 12 14 16 18 20 22 24
Backshell with cable clampBackshell for shielded cables
and heatshrink boot
A
B
ØC
ØD
ØE
FG
ØH
J
Backshells
8ST Series
VG96912 & JN1003
39
© 2012 - SOURIAU
Protective caps
Note: All dimensions are in millimeters (mm)
Ordering information
Shell size ØA Max ØB Min ØC Max L
08 19 14.6 23.5 84
10 22 17 . 8 26.77
12 26 22.5 31.55
100
14 29 25.7 36.83
16 33 28.9 40.31
18 36 32.1 43.18
20 39 35.2 46.36
11 6
22 44 38.4 49.19
24 46 41.6 52.71
Metalic protective caps for receptacle
Dimensions
Basic series
8500-: Cap for receptacle
8500- 02 -44D
Size code:
02, 03, 04, 05, 27, 06, 07, 08, 09
Plating & xing type:
J: Olive green cadmium plating with metalic chain and ring
D: Olive green cadmium plating with metalic chain and eyelet
-44D: Nickel plating with metalic chain and eyelet
Size code 02 03 04 05 27 06 07 08 09
= Shell size 8ST 08 10 12 14 16 18 20 22 24
Shell
size
ØA Part numbers
Cap for receptacle Cap for plug Cap for receptacle Cap for plug
08 15.40 16.65 8500 5585 A 70 777
10 18.30 19.72 8500 5586 A 70 205
12 22.65 - 8500 5587 A MS90376 16Y
14 25.80 30.80 8500 5588 A 8500 5600
16 29.20 33.90 8500 5589 A 8500 5601
18 32.40 37.00 8500 5590 A 8500 5602
20 35.60 39.00 8500 5591 A 8500 5592A
22 39.00 42.20 8500 5592 A 8500 5593A
24 42.20 44.50 8500 5593 A 70 472
Plastic protective caps
A
ØA
ØB ØC
Ø3.5
Min
23 Max
L
8ST Series
VG96912 & JN1003
40 © 2012 - SOURIAU
Shell
size
Part
numbers
A
Max
B
Max ØC D
Max EØF ±0.13
08 8ST0-08GUR 18.35 16.05 12.04 21.00 15.10 3.05
10 8ST0-10GUR 18.35 16.05 15.02 24.20 18.26 3.05
12 8ST0-12GUR 18.35 16.05 19.08 26.60 20.62 3.05
14 8ST0614GUR 18.35 16.05 22.26 29.00 23.01 3.05
16 8ST0-16GUR 18.35 16.05 25.43 31.35 24.61 3.05
18 8ST0-18GUR 18.35 16.05 28.61 33.70 26.98 3.05
20 8ST0-20GUR 18.35 15.29 31.78 36.90 29.38 3.05
22 8ST0-22GUR 18.35 15.29 34.96 40.10 31.77 3.05
24 8ST0-24GUR 18.35 15.29 38.13 43.30 34.92 3.73
Dummy receptacles
A
B
C
D
F
E
Panel gasket
Shell
size
Part numbers
Gasket for receptacle type 0 O ring for receptacle type 7
08 8525-1431 8590-2251 AS3582-017
10 8525-1432 8590-2252 AS3582-019
12 8525-1433 8590-2253 AS3582-022
14 8525-1434 8590-2254 AS3582-024
16 8525-1435 8590-2255 AS3582-026
18 8525-1436 8590-2256 AS3582-028
20 8525-1437 8590-2257 AS3582-128
22 8525-1438 8590-2258 AS3582-130
24 8525-1439 8590-2259 AS3582-132
Notes:
- 8ST0 gasket must be ordered separatly
- Compliant to 8ST Series temperature range - max 200°C
- For use up to 125°C, gaskets in accordance with VG95328:
VG95328T07A...= non conductive
VG95328 07B...= conductive (for HF application)
Note: All dimensions are in millimeters (mm)
8ST Series
VG96912 & JN1003
41
© 2012 - SOURIAU
Reductors
Reductor Size Part number For cable For pin contacts For socket contacts
#8 Power 8599-7645 #10 8599-7580 8599-7581
#4 Power 8400-2352A 10 mm² 8599-7534A 8599-7535A
Boots
Boot Size Part number Admissible wire section mm² For cable
#8 Power
8599-4542 5 6.5 8.48 à 10 mm²
8599-4547 2.5 4 #10
#4 Power
8599-4594 6.35 7. 5 #4 - #5
8599-4593 4 5.8 #6 - #8
B
ANDC
100°
37°
28°
5°
B
A
N
D
C
100°
37°
28°
5°
Orientations
Polarization is determined by the master keyway position.
The secondary keyway positions remain xed.
Shell
size
Angles (degrees)
N A BCD
08 95 77 - - 113
10 95 81 67 12 3 109
12 95 75 63 12 7 115
14 95 74 61 12 9 11 6
16 95 77 65 12 5 113
18 95 77 65 12 5 113
20 95 77 65 12 5 113
22 95 80 69 12 1 11 0
24 95 80 69 12 1 11 0
View from front
face of receptacle
View from front
face of plug
8ST Series
VG96912 & JN1003
42 © 2012 - SOURIAU
Ctc X Y
7-2.66 -0.47
8-2.34 +1.35
9-0.92 +2.54
10 0.00 +1.03
11 +0.89 -0.51
12 -0.89 -0.51
12
+X-X
+Y
-Y
Ctc X Y
1+0.92 +2.54
2+2.34 +1.35
3+2.66 -0.47
4+1.74 -2.07
50.00 -2.70
6-1.74 -2.07
08
Coordinates for straight PC tail terminations
Viewed from front face of male insulator
Hole sizes: 1mm min. (#22 and #20 contacts) and 1.3mm min. (#16 contact) coordinates in mm.
98
+X-X
+Y
-Y
Ctc X Y
A+1.65 +0.97
B0.00 -1.90
C-1.65 +0.97
35
+X-X
+Y
-Y
Ctc X Y
1+1.14 +1.98
2+1.98 -1.14
30.00 -2.29
4+1.98 -1.14
5+1.14 +1.98
60.00 0.00
05
+X-X
+Y
-Y
Ctc X Y
A+1.65 +1.42
B+2.86 -1.65
C0.00 -3.30
D-2.86 -1.65
E-1.65 +1.42
04
+X-X
+Y
-Y
Ctc X Y
A+1.65 +1.65
B+1.65 -1.65
C-1.65 -1.65
D-1.65 +1.65
+X-X
+Y
-Y
02
Ctc X Y
A0.00 +2.41
B0.00 -2.41
10
Ctc X Y
1+1.69 +3.79
2+3.09 +2.77
3+3.95 +1.28
4+4.13 -0.44
5+3.58 -2.10
6+2.40 -3.37
70.00 -4.13
8-2.40 -3.37
9-3.58 -2.10
10 -4.13 -0.44
11 -3.95 +1.28
12 -3.09 +2.77
13 -1.69 +3.79
Ctc X Y
14 0.00 +3.50
15 +1.70 +1.76
16 +2.55 +0.29
17 +1.70 -1.18
18 +0.85 -2.65
19 -0.85 -2.65
20 -1.70 -1.18
21 -2.55 +0.29
22 -1.70 +1.76
23 0.00 +1.76
24 +0.85 +0.29
25 0.00 -1.18
26 -0.85 +0.29
26
+X-X
+Y
-Y
35
+X-X
+Y
-Y
Ctc X Y
10.00 +3.71
2+2.16 +3.00
3+3.51 +1.14
4+3.51 -1.14
5+2.16 -3.00
Ctc X Y
10 -2.16 +3.00
11 0+1.42
12 +1.24 -0.89
13 -1.24 -0.89
Ctc X Y
60.00 -3.71
7-2.16 -3.00
8-3.51 -1.14
9-3.51 +1.14
8ST Series
VG96912 & JN1003
43
© 2012 - SOURIAU
Ctc X Y
A0.00 +3.30
B+3.30 0.00
C+1.65 -2.87
D-1.65 -2.87
E-3.30 0.00
F0.00 0.00
+X-X
+Y
-Y
04 35
+X-X
+Y
-Y
Ctc X Y
12 -4.62 +2.24
13 -3.20 +4.01
14 -1.14 +5.00
15 +1.14 +2.72
16 +2.97 +0.66
17 +2.36 -1.91
18 0.00 -3.05
19 -2.36 -1.91
20 -2.97 +0.66
21 -1.14 +2.72
22 0.00 -0.76
Ctc X Y
1+1.14 +5.00
2+3.20 +4.01
3+4.62 +2.24
4+5.16 0.00
5+4.62 -2.24
6+3.20 -4.01
7+1.14 -5.00
8-1.14 -5.00
9-3.20 -4.01
10 -4.62 -2.24
11 -5.16 0.00
Ctc X Y
A0.00 +3.81
B+3.71 +0.89
C0.00 -2.11
D-3.71 +0.89
08
+X-X
+Y
-Y
Ctc X Y
A+1.65 +3.99
B+4.32 0.00
C+3.05 -3.05
D0.00 -4.32
E-3.05 -3.05
F-4.32 0.00
G-1.65 +3.99
H0.00 +1.12
12
10
98
+X-X
+Y
-Y
99
+X-X
+Y
-Y
Ctc X Y
A+1.65 +2.85
B+3.30 0.00
C+1.65 -2.87
D-1.65 -2.87
E-3.30 0.00
F-1.65 +2.87
G0.00 0.00
98
+X-X
+Y
-Y
Ctc X Y
A0.00 +4.95
B+3.18 +3.81
C+4.90 +0.76
D+4.17 -2.67
E0.00 -3.43
Ctc X Y
F-4.17 -2.67
G-4.90 +0.76
H-3.18 +3.81
J+1.65 -0.38
K-1.65 -0.38
Ctc X Y
23 +3.92 +1.27
24 +4.10 -0.43
25 +3.57 -2.06
26 +1.99 -2.74
27 +0.86 -4.03
28 -0.86 -4.03
29 -1.99 -2.74
30 -3.57 -2.06
31 -4.10 -0.43
32 -3.92 +1.27
33 -2.54 +2.28
34 -1.68 +3.76
35 0.00 +2.42
36 +1.21 +1.21
37 +2.42 0.00
38 +1.21 -1.21
39 0.00 -2.42
40 -1.21 -1.21
41 -2.42 0.00
42 -1.21 +1.21
43 0.00 0.00
Ctc X Y
1+1.80 +5.54
2-1.80 +5.54
3+3.42 +4.71
4+4.71 +3.42
5+5.54 +1.80
6+5.82 0.00
7+5.54 -1.80
8+4.71 -3.42
9+3.42 -4.71
10 +1.80 -5.54
11 0.00 -5.82
12 -1.80 -5.54
13 -3.42 -4.71
14 -4.71 -3.42
15 -5.54 -1.80
16 -5.82 0.00
17 -5.54 +1.80
18 -4.71 +3.42
19 -3.42 +4.71
20 0.00 +4.12
21 +1.68 +3.76
22 +2.54 +2.28
43
+X-X
+Y
-Y
8ST Series
VG96912 & JN1003
44 © 2012 - SOURIAU
35
+X-X
+Y
-Y
Ctc X Y
20 +3.12 +3.02
21 +4.32 +1.02
22 +4.32 -1.27
23 +3.12 -3.23
24 +1.14 -4.37
25 -1.14 -4.37
26 -3.12 -3.23
27 -4.32 -1.27
28 -4.32 +1.02
29 -3.12 +3.02
30 -1.14 +4.37
31 +1.14 +1.88
32 +2.29 -0.10
33 +1.14 -2.08
34 -1.14 -2.08
35 -2.29 -0.10
36 -1.14 +1.88
37 0.00 -0.10
Ctc X Y
1+1.14 +6.65
2+3.12 +5.51
3+5.36 +4.06
4+6.45 +2.03
5+6.75 -0.25
6+6.27 -2.49
7+5.08 -4.45
8+3.30 -5.89
9+1.14 -6.65
10 -1.14 -6.65
11 -3.30 -5.89
12 -5.08 -4.45
13 -6.27 -2.49
14 -6.76 -0.25
15 -6.45 +2.03
16 -5.36 +4.06
17 -3.12 +5.51
18 -1.14 +6.65
19 +1.14 +4.37
97
+X-X
+Y
-Y
Ctc X Y
A+1.65 +5.94
B+4.52 +4.52
C+5.84 -0.58
D+4.52 -4.52
E+1.65 -5.94
F-2.26 -5.97
G-5.26 -2.41
H-5.94 +1.65
J-4.52 +4.52
K-1.65 +5.94
L-1.19 +2.06
M+1.19 -2.06
14
18
+X-X
+Y
-Y
Ctc X Y
A+1.65 +6.40
B+4.95 +2.87
C+6.60 0.00
D+4.95 -2.87
E+3.30 -5.72
F0.00 -5.72
G-3.30 -5.72
H-4.95 -2.87
J-6.60 0.00
Ctc X Y
K-4.95 +2.87
L-1.65 +6.40
M-1.65 +2.87
N+1.65 +2.87
P+3.30 0.00
R+1.65 -2.87
S-1.65 -2.87
T-3.30 0.00
U0.00 0.00
05
+X-X
+Y
-Y
Ctc X Y
A0+2.54
B+4.42 +0.61
C+2.39 +3.76
D-2.39 -3.76
E-4.42 +0.61
19
+X-X
+Y
-Y
Ctc X Y
A0.00 +5.72
B+3.30 +5.72
C+4.95 +2.87
D+6.60 0.00
E+4.95 -2.87
F+3.30 -5.72
G0.00 -5.72
H-3.30 -5.72
J-4.95 -2.87
K-6.60 0.00
Ctc X Y
L-4.95 +2.87
M-3.30 +5.72
N-1.65 +2.87
P+1.65 +2.87
R+3.30 0.00
S+1.65 -2.87
T-1.65 -2.87
U-3.30 0.00
V0.00 0.00
8ST Series
VG96912 & JN1003
45
© 2012 - SOURIAU
35
+X-X
+Y
-Y
99
+X-X
+Y
-Y
16
06
+X-X
+Y
-Y
Ctc X Y
A+3.07 +5.31
B+6.12 0.00
C0.00 -6.12
D-6.12 0.00
E-3.07 +5.31
F0.00 0.00
08
+X-X
+Y
-Y
Ctc X Y
A0.00 +5.99
B+3.25 +2.18
C+5.84 -1.98
D+2.39 -5.49
E-2.39 -5.49
F-5.84 -1.98
G-3.25 +2.18
H0.00 -1.32
26
+X-X
+Y
-Y
Ctc X Y
A0.00 +8.15
B+3.33 +7.44
C+6.07 +5.44
D+7.75 +2.51
E+8.10 -0.86
F+7.06 -4.09
G+4.80 -6.60
H+1.70 -7.98
Ctc X Y
J-1.70 -7.98
K-4.80 -6.60
L-7.06 -4.09
M-8.10 -0.86
N-7.75 +2.51
P-6.07 +5.44
R-3.33 +7.44
S-1.78 +4.50
T+1.78 +4.50
U+4.45 +2.39
V+4.53 -0.91
W+3.02 -3.84
X0.00 -5.16
Y-3.02 -3.84
Z-4.53 -0.91
a-4.45 +2.39
b0.00 +1.65
c0.00 -1.65
Ctc X Y
A0.00 +8.15
B+3.33 +7.44
C+6.07 +5.44
D+7.75 +2.51
E+8.10 -0.86
F+7.06 -4.09
G+4.80 -6.60
H+1.70 -7.98
J-1.70 -7.98
K-4.80 -6.60
L-7.06 -4.09
M-8.10 -0.86
Ctc X Y
N-7.75 +2.51
P-6.07 +5.44
R-3.33 +7.44
S-1.78 +4.50
T+1.78 +4.50
U+4.45 +2.39
V+3.81 -1.91
W0.00 -4.09
X-3.81 -1.91
Y-4.45 +2.39
Z0.00 +0.64
Ctc X Y
25 0.00 +8.36
26 0.00 +4.47
27 0.00 +2.18
28 0.00 -0.10
29 0.00 -2.39
30 0.00 +4.67
31 0.00 -6.96
32 +2.26 +8.03
33 +1.98 +5.61
34 +1.98 +3.33
35 +1.98 +1.04
36 +1.98 -1.24
37 +1.98 -3.53
38 +1.98 -5.82
39 +1.98 -8.10
40 +4.37 +7.09
Ctc X Y
13 -3.96 -0.10
14 -3.96 -2.39
15 -3.96 -4.67
16 -3.96 -6.96
17 -2.26 +8.03
18 -1.98 +5.61
19 -1.98 +3.33
20 -1.98 +1.04
21 -1.98 -1.24
22 -1.98 -3.53
23 -1.98 -5.82
24 -1.98 -8.10
Ctc X Y
41 +3.96 +4.47
42 +3.96 +2.18
43 +3.96 -0.10
44 +3.96 -2.39
45 +3.96 -4.67
46 +3.96 -6.96
47 +6.15 +5.61
48 +5.94 +3.33
49 +5.94 +1.04
50 +5.94 -1.24
51 +5.94 -3.53
52 +5.94 -5.82
53 +7.92 +2.18
54 +7.92 -0.10
55 +7.92 2-.39
Ctc X Y
1-7.92 +2.18
2-7.92 -0.10
3-7.92 -2.39
4-6.15 +5.61
5-5.94 +3.33
6-5.94 +1.04
7-5.94 -1.24
8-5.94 -3.53
9-5.94 -5.82
10 -4.37 +7.09
11 -3.96 +4.47
12 -3.96 +2.18
8ST Series
VG96912 & JN1003
46 © 2012 - SOURIAU
35
+X-X
+Y
-Y
Ctc X Y
15 -5.11 -4.57
16 -5.11 -6.86
17 -3.12 +8.00
18 +3.12 +5.72
19 -3.12 +3.43
20 -3.12 +1.14
21 -3.12 -1.14
22 -3.12 -3.43
23 -3.12 -5.72
24 -3.12 -8.00
25 -1.14 +9.14
26 -1.14 +6.86
27 -1.14 +4.57
Ctc X Y
1-9.07 +2.29
2-9.07 +0.08
3-9.07 -2.29
4-7.09 +5.72
5-7.09 +3.43
6-7.09 +1.14
7-7.09 -1.14
8-7.09 -3.43
9-7.09 -5.72
10 -5.11 +6.86
11 -5.11 +4.57
12 -5.11 +2.29
13 -5.11 0.00
14 -5.11 -2.29
Ctc X Y
28 -1.14 +2.29
29 -1.14 0.00
30 -1.14 -2.29
31 -1.14 -4.57
32 -1.14 -6.86
33 -1.14 -9.14
34 +1.14 +9.14
35 +1.14 +6.86
36 +1.14 +4.57
37 +1.14 +2.29
38 +1.14 0.00
39 +1.14 -2.29
40 +1.14 -4.57
Ctc X Y
41 +1.14 -6.86
42 +1.14 -9.14
43 +3.12 +8.00
44 +3.12 +5.72
45 +3.12 +3.43
46 +3.12 +1.14
47 +3.12 -1.14
48 +3.12 -3.43
49 +3.12 -5.72
50 +3.12 -8.00
51 +5.11 +6.86
52 +5.11 +4.57
53 +5.11 +2.29
Ctc X Y
54 +5.11 0.00
55 +5.11 -2.29
56 +5.11 -4.57
57 +5.11 -6.86
58 +7.09 +5.72
59 +7.09 +3.43
60 +7.09 +1.14
61 +7.09 -1.14
62 +7.09 -3.43
63 +7.09 -5.72
64 +9.07 +2.29
65 +9.07 0.00
66 +9.07 -2.29
18
11 32
+X-X
+Y
-Y
+X-X
+Y
-Y
Ctc X Y
A+2.67 +6.60
B+6.35 +3.35
C+6.99 -1.35
D+4.55 -5.46
E0.00 -7.14
F-4.55 -5.46
G-6.99 -1.35
H-6.35 +3.35
J-2.67 +6.60
K0.00 +2.67
L0.00 -2.34
Ctc X Y
T-1.68 +8.97
U0.00 +5.84
V+3.15 +4.90
W+5.31 +2.41
X+5.79 -0.84
Y+4.42 -3.84
Z+1.65 -5.61
a-1.65 -5.61
b-4.42 -3.84
c-5.79 -0.84
d-5.31 +2.41
e-3.15 +4.90
f0.00 +2.44
g+2.44 0.00
h0.00 -2.44
j-2.44 0.00
Ctc X Y
A+1.68 +8.97
B+4.80 +7.75
C+7.26 +5.51
D+8.76 +2.49
E+9.07 -0.84
F+8.15 -4.06
G+6.15 -6.73
H+3.30 -8.51
J0.00 -9.12
K-3.30 -8.51
L-6.15 -6.73
M-8.15 -4.06
N-9.07 -0.84
P-8.76 +2.49
R-7.26 +5.51
S-4.80 +7.75
8ST Series
VG96912 & JN1003
47
© 2012 - SOURIAU
41
+X-X
+Y
-Y
39
+X-X
+Y
-Y
20
16
+X-X
+Y
-Y
35
+X-X
+Y
-Y
Ctc X Y
1+1.35 +10.82
2+3.71 +10.26
3+5.89 +9.19
4+7.77 +7.67
5+9.27 +5.77
6+10.31 +3.58
7+10.85 +1.22
8+10.85 -1.22
9+10.31 -3.58
10 +9.27 -5.77
11 +7.77 -7.67
12 +5.89 -9.19
13 +3.71 -10.26
Ctc X Y
14 +1.35 -10.82
15 -1.35 -10.82
16 -3.71 -10.26
17 -5.89 -9.19
18 -7.77 -7.67
19 -9.27 -5.77
20 -10.31 -3.58
21 -10.85 -1.22
22 -10.85 +1.22
23 -10.31 +3.58
24 -9.27 +5.77
25 -7.77 +7.67
26 -5.89 +9.19
27 -3.71 +10.26
28 -1.35 +10.82
29 0.00 +8.20
30 +2.49 +8.18
31 +4.67 +7.11
32 +6.55 +5.59
33 +7.90 +3.58
34 +8.43 +1.22
35 +8.43 -1.22
Ctc X Y
36 +7.90 -3.58
37 +6.55 -5.59
38 +4.67 -7.11
39 +2.49 -8.18
40 0.00 -8.81
41 -2.49 -8.18
42 -4.67 -7.11
43 -6.55 -5.59
44 -7.90 -3.58
45 -8.43 -1.22
46 -8.43 +1.22
47 -7.90 +3.58
48 -6.55 +5.59
49 -4.67 +7.11
50 -2.49 +8.18
51 -1.22 +6.12
52 +1.22 +6.12
53 +3.40 +5.05
54 +5.28 +3.53
55 +6.02 +1.22
56 +6.02 -1.22
57 +5.28 -3.53
Ctc X Y
58 +3.40 -5.05
59 +1.22 -6.12
60 -1.22 -6.12
61 -3.40 -5.05
62 -5.28 -3.53
63 -6.02 -1.22
64 -6.02 +1.22
65 -5.28 +3.53
66 -3.40 +5.05
67 -1.22 +3.71
68 +1.22 +3.71
69 +3.18 +2.29
70 +3.94 0.00
71 +3.18 -2.29
72 +1.22 -3.71
73 -1.22 -3.71
74 -3.18 -2.29
75 -3.94 0.00
76 -3.18 +2.29
77 0.00 +1.35
78 +1.22 -0.74
79 -1.22 -0.74
Ctc X Y
A+3.00 +8.18
B+6.88 +5.36
C+8.66 +0.91
D+7.82 -3.81
E+4.62 -7.37
F0.00 -8.71
G-4.62 -7.37
H-7.82 -3.81
Ctc X Y
J-8.66 +0.91
K-6.88 +5.36
L-3.00 +8.18
M0.00 +4.45
N+3.91 +1.57
P+2.39 -3.10
R-2.39 -3.10
S-3.91 +1.57
Ctc X Y
P-9.42 -4.80
R-10.44 -1.65
S-10.44 +1.65
T-9.42 +4.80
U-7.47 +7.47
V-4.80 +9.42
W-1.65 +10.44
X0.00 +7.49
Y+3.20 +6.50
Z+5.89 +4.55
a+7.11 +1.45
b+7.11 -1.88
c+5.51 -4.80
Ctc X Y
A+1.65 +10.44
B+4.80 +9.42
C+7.47 +7.47
D+9.42 +4.80
E+10.44 +1.65
F+10.44 -1.65
G+9.42 -4.80
H+7.47 -7.47
J+4.80 -9.42
K+1.65 -10.44
L-1.65 -10.44
M-4.80 -9.42
N-7.47 -7.47
Ctc X Y
d+2.84 -6.73
e-2.84 -6.73
f-5.51 -4.80
g-7.11 -1.88
h-7.11 +1.45
i-5.89 +4.55
j-3.20 +6.50
k0.00 +4.17
m+2.90 +1.22
n+2.69 -2.72
p0.00 -4.80
q-2.69 -2.72
r-2.90 +1.22
Ctc X Y
Z+5.92 +4.09
a+7.15 +0.87
b+6.73 -2.55
c+4.78 -5.39
d+1.73 -6.99
e-1.73 -6.99
f-4.78 -5.39
g-6.73 -2.55
h-7.15 +0.87
i-5.92 +4.09
j-3.35 +6.38
k0.00 +3.81
m+2.98 +2.38
n+3.71 -0.85
p-1.66 -3.43
q+1.66 -3.43
r-3.71 -0.85
s-2.98 +2.38
t0.00 0.00
Ctc X Y
A0.00 +10.60
B+3.28 +10.09
C+6.23 +8.58
D+8.58 +6.23
E+10.09 +3.28
F+10.60 0.00
G+10.09 -3.28
H+8.58 -6.23
J+6.23 -8.58
K+3.28 -10.09
L0.00 -10.60
Ctc X Y
M-3.26 -10.09
N-6.23 -8.58
P-8.58 -6.23
R-10.09 -3.28
S-10.60 0.00
T-10.09 +3.28
U-8.58 +6.23
V-6.23 +8.58
W-3.28 +10.09
X0.00 +7.20
Y+3.35 +6.38
8ST Series
VG96912 & JN1003
48 © 2012 - SOURIAU
04
+X-X
+Y
-Y
Ctc X Y
A+1.75 +13.49
B+5.16 +12.57
C+8.23 +10.80
D+10.77 +8.28
E+12.52 +5.21
F+13.49 +1.75
G+13.49 -1.75
Ctc X Y
H+12.52 -5.21
J+10.77 -8.28
K+8.23 -10.80
L+5.16 -12.57
M+1.75 -13.49
N-1.75 -13.49
P-5.16 -12.57
Ctc X Y
R-8.23 -10.80
S-10.77 -8.28
T-12.52 -5.21
U-13.49 -1.75
V-13.49 +1.75
W-12.52 +5.21
X-10.77 +8.28
Y-8.23 +10.80
Z-5.16 +12.57
a-1.75 +13.49
b+2.18 +10.08
c+5.38 +8.78
d+7.90 +6.38
e+9.58 +3.35
f+10.46 0.00
g+9.58 -3.35
h+7.90 -6.38
k+5.38 -8.78
m+2.18 -10.08
n-2.18 -10.08
p-5.38 -8.78
Ctc X Y
q-7.90 -6.38
r-9.58 -3.35
s-10.46 0.00
t-9.58 +3.35
u-7.90 +6.38
v-5.38 +8.78
w-2.18 +10.08
x+1.75 +6.66
y+4.37 +3.78
z+6.55 0.00
AA +4.37 -3.78
BB +1.75 -6.66
CC -1.75 -6.66
DD -4.37 -3.78
EE -6.55 0.00
FF -4.37 -3.78
GG -1.75 -6.66
HH 0.00 +3.35
JJ +2.18 0.00
KK 0.00 -3.35
LL -2.18 0.00
29
+X-X
+Y
-Y
Ctc X Y
J-2.31 -11.99
K-6.68 -10.31
L-10.03 -7.04
M-11.91 -2.77
N-11.91 +2.77
P-10.03 +7.04
R-6.55 +10.31
S-2.31 +8.15
T+2.31 +8.15
U+5.79 +4.93
V+8.10 0.00
W+6.10 -4.60
X+2.31 -7.37
Y-2.31 -7.37
Z-6.10 -4.60
a-8.10 0.00
b-5.79 +4.93
c0.00 +4.09
d+3.40 0.00
e0.00 -3.30
f-3.40 0.00
Ctc X Y
A0.00 +12.22
B+6.55 +10.31
C+10.03 +7.04
D+11.91 +2.77
E+11.91 -2.77
F+10.03 -7.04
G+6.68 -10.31
H+2.31 -11.99
24
21
+X-X
+Y
-Y
53
+X-X
+Y
-Y
Ctc X Y
A+3.25 +9.78
B+7.34 +7.24
C+9.80 +3.12
D+10.16 -1.65
E+8.33 -6.07
F+4.65 -9.19
G0.00 -10.31
H-4.65 -9.19
J-8.33 -6.07
K-10.16 -1.65
L-9.80 +3.12
M-7.34 +7.24
N-3.25 +9.78
P0.00 +6.22
R+4.06 +3.71
S+5.44 -0.89
T+2.39 -4.93
U-2.39 -4.93
V-5.44 -0.89
W-4.06 +3.71
X0.00 0.00
Ctc X Y
A+2.84 +11.56
B+5.72 +9.91
C+8.53 +8.26
D+11.43 +3.30
E+11.43 0.00
F+11.43 -3.30
Ctc X Y
G+8.53 -8.26
H+5.72 -10.41
J-5.72 -10.41
K-8.53 -8.26
L-11.43 -3.30
M-11.43 0.00
Ctc X Y
N-11.43 +3.30
P-8.53 +8.26
R-5.72 +9.91
S-2.84 +11.56
T0.00 +9.91
U+2.84 +8.26
V+5.72 +6.60
W+8.53 +4.95
X+8.53 +1.65
Y+8.53 -1.65
Z+8.53 -4.95
a+5.72 -6.60
b+2.84 -8.26
c0.00 -9.91
d-2.84 -8.26
e-5.72 -6.60
f-8.53 -4.95
g-8.53 -1.65
h-8.53 +1.65
k-8.53 +4.95
Ctc X Y
m-5.72 +6.60
n-2.84 +8.26
p0.00 +6.60
q+2.84 +4.95
r+5.72 +3.30
s+5.72 0.00
t+5.72 -3.30
u+2.84 -4.95
v0.00 -6.60
w-2.84 -4.95
x-5.72 -3.30
y-5.72 0.00
z-5.72 +3.30
AA -2.84 +4.95
BB 0.00 +3.30
CC +2.84 +1.65
DD +2.84 -1.65
EE 0.00 -3.30
FF -2.84 -1.65
GG -2.84 +1.65
HH 0.00 0.00
22
8ST Series
VG96912 & JN1003
49
© 2012 - SOURIAU
43
+X-X
+Y
-Y
+X-X
+Y
-Y
61
Ctc X Y
A+4.98 +12.70
B+7.98 +11.05
C+10.49 +8.71
D+12.32 +5.84
E+13.39 +2.57
F+13.61 -0.76
G+12.98 -4.17
H+11.53 -7.29
J+9.35 -9.93
Ctc X Y
K+6.58 -11.94
L+3.40 -13.18
M0.00 -13.64
N-3.40 -13.18
P-6.58 -11.94
R-9.35 -9.93
S-11.53 -7.29
T-12.98 -4.17
U-13.61 -0.76
Ctc X Y
V-13.39 +2.57
W-12.32 +5.84
X-10.49 +8.71
Y-7.98 -11.05
Z-4.98 +12.10
a-1.73 +11.53
b+1.73 +11.53
c+4.39 +9.22
d+7.24 +7.19
e+9.19 +4.45
f+10.13 +1.17
g+9.96 -2.24
h+8.66 -5.41
i+6.38 -7.98
j+3.38 -9.63
k0.00 -10.21
m-3.38 -9.63
n-6.38 -7.98
p-8.66 -5.41
q-9.96 -2.24
r-10.13 +1.17
s-9.19 +4.45
Ctc X Y
t-7.24 +7.19
u-4.39 +9.22
v0.00 +8.59
w+3.73 +5.66
x+6.02 +3.10
y+6.78 -0.25
z+5.79 -3.53
AA +3.33 -5.92
BB 0.00 -6.78
CC -3.33 -5.92
DD -5.79 -3.53
EE -6.78 -0.25
FF -6.02 +3.10
GG -3.73 +5.66
HH 0.00 +5.08
JJ +2.67 +2.39
KK +3.43 -1.04
LL 0.00 -3.35
MM -3.43 -1.04
NN -2.67 +2.39
PP 0.00 0.00
Ctc X Y
A+1.75 +13.49
B+5.16 +12.57
C+8.23 +10.80
D+10.77 +8.28
E+12.52 +5.21
F+13.49 +1.75
G+13.49 -1.75
H+12.52 -5.21
J+10.77 -8.28
K+8.23 -10.80
L+5.16 -12.57
M0.00 -13.49
N-5.16 -12.57
P-8.23 -10.80
R-10.77 -8.28
S-12.52 -5.21
T-13.49 -1.75
U-13.49 +1.75
V-12.52 +5.21
W-10.77 +8.28
X-8.23 +10.80
Y-5.16 +12.57
Ctc X Y
Z-1.75 +13.4
a+4.37 +8.74
b+6.55 +4.37
c+8.74 0.00
d+8.74 -4.37
e+4.37 -8.74
f0.00 -8.74
g-4.37 -8.74
h-8.74 -4.37
k-8.74 0.00
m-6.55 +4.37
n-4.37 +8.74
p0.00 +8.74
q+2.18 +4.37
r+4.37 0.00
s+4.37 -4.37
t0.00 -4.37
u-4.37 -4.37
v-4.37 0.00
w-2.18 +4.37
x0.00 0.00
24
+X-X
+Y
-Y
35
Ctc X Y
1-12.17 +7.09
2-13.21 +4.83
3-13.87 +2.41
4-14.10 0.00
5-13.87 -2.41
6-13.21 -4.83
7-12.17 -7.09
8-10.77 +9.07
9-10.54 +4.83
10 -10.54 +2.41
11 -10.54 0.00
12 -10.54 -2.41
13 -10.54 -4.83
14 -10.77 -9.07
15 -8.43 +11.28
16 -8.43 +8.43
17 -8.43 +6.02
18 -8.43 +3.61
19 -8.43 +1.19
20 -8.43 -1.19
21 -8.43 -3.61
22 -8.43 -6.02
23 -8.43 -8.43
24 -8.43 -10.85
25 -6.32 +12.60
26 -6.32 +9.65
Ctc X Y
27 -6.32 +7.24
28 -6.32 +4.83
29 -6.32 +2.41
30 -6.32 0.00
31 -6.32 -2.41
32 -6.32 -4.83
33 -6.32 -7.24
34 -6.32 -9.65
35 -6.32 -12.07
36 -4.06 +13.49
37 -4.22 +10.85
38 -4.22 +8.43
39 -4.22 +6.02
40 -4.22 +3.61
41 -4.22 +1.19
42 -4.22 -1.19
43 -4.22 -3.61
44 -4.22 -6.02
45 -4.22 -8.43
46 -4.22 -10.85
47 -4.22 -13.26
48 -2.11 +12.07
49 -2.11 +9.65
50 -2.11 +7.24
51 -2.11 +4.83
52 -2.11 +2.41
Ctc X Y
53 -2.11 0.00
54 -2.11 -2.41
55 -2.11 -4.83
56 -2.11 -7.24
57 -2.11 -9.65
58 -2.11 -12.07
59 0.00 +13.26
60 0.00 +10.85
61 0.00 +8.43
62 0.00 +6.02
63 0.00 +3.61
64 0.00 +1.19
65 0.00 -1.19
66 0.00 -3.61
67 0.00 -6.02
68 0.00 -8.43
69 0.00 -10.85
70 0.00 -14.10
71 +2.11 +12.07
72 +2.11 +9.65
73 +2.11 +7.34
74 +2.11 +4.83
75 +2.11 +2.41
76 +2.11 0.00
77 +2.11 -2.41
78 +2.11 -4.83
Ctc X Y
79 +2.11 -7.24
80 +2.11 -9.65
81 +2.11 -12.07
82 +4.06 +13.49
83 +4.22 +10.85
84 +4.22 +8.43
85 +4.22 +6.02
86 +4.22 +3.61
87 +4.22 +1.19
88 +4.22 -1.19
89 +4.22 -3.61
90 +4.22 -6.02
91 +4.22 -8.43
92 +4.22 -10.85
93 +4.22 -13.26
94 +6.32 +12.60
95 +6.32 +9.65
96 +6.32 +7.24
97 +6.32 +4.83
98 +6.32 +2.41
99 +6.32 0.00
10 0 +6.32 -2.41
10 1 +6.32 -4.83
10 2 +6.32 -7.24
10 3 +6.32 -9.65
Ctc X Y
10 4 +6.32 -12.07
10 5 +8.43 +11.28
10 6 +8.43 +8.43
10 7 +8.43 +6.02
10 8 +8.43 +3.61
10 9 +8.43 +1.19
110 +8.43 -1.19
111 +8.43 -3.61
112 +8.43 -6.02
113 +8.43 -8.43
114 +8.43 -10.85
115 +10.77 +9.07
116 +10.54 +4.83
117 +10.54 +2.41
118 +10.54 0.00
119 +10.54 -2.41
12 0 +10.54 -4.83
12 1 +10.77 -9.07
12 2 +12.17 +7.09
12 3 +13.21 +4.83
12 4 +13.87 +2.41
12 5 +14.10 0.00
12 6 +13.87 -2.41
12 7 +13.21 -4.83
12 8 +12.17 -7.09
8ST Series
Range Extension
52
53
53
54
54
8STA Series & 8STA derived Series ...........................................................................................
847/848 Series ................................................................................................................................
VGE1 Series ......................................................................................................................................
micro38999 Series .........................................................................................................................
851 Series .........................................................................................................................................
8ST Series
52 © 2012 - SOURIAU
Range Extension
8STA Series
8STA Derived Series
One of the primary objectives with 8STA Series
family is to push the boundaries of innovation !
Continuing on with this theme, many new 8STA
products are developped by SOURIAU teams.
Blind mating plug:
. Quick connection in hard-to-reach areas.
. Compensating misalignment in 3 axes.
Steering boss system:
. Quick release.
Hermetic & fuel tank version:
. Excellent hermeticity and corrosion resistance.
. Resistance to racing fuels and fluids.
Integrated clinch nuts:
. Elimination of nut plates - convenient, weight and time saving.
High density layouts and power contacts available.
See «Compact CIrcular Connectors 8STA/8TA
Series» catalog on www.souriau.com
8STA Series circular connectors are derived from
international military specifications MIL-DTL-38999
and JN1003. Dedicated to Motorsport markets, 8STA
Series connectors are designed to withstand high
levels of shock and vibration in harsh environments.
The world smallest and most popular connector:
. 8STA Series Size 02.
. Miniature lightweight connector.
. Ideal for areas where space is a premium.
Versatility:
. Removable crimp contacts.
. Available with PCB contacts.
User friendly:
. Quick bayonet locking.
. Integrated backshell
. Visual color indication when mated.
. Up to 7 color coded keyway orientations.
Product range extension
See «Compact CIrcular Connectors 8STA/8TA
Series» catalog on www.souriau.com
8ST
intermateable
8STA
53
© 2012 - SOURIAU
Range Extension
Product range extension
847/848 Series
VGE1 Series
The solution for outdoor/indoor data transmission
in harsh environments. Ruggedised bayonet
connection. Signal and Quadrax layouts. Tested
following NF F 61-030
Quick coupling:
. Bayonet coupling.
Suitable for indoor applications:
. Flame retardant material.
High corrosion resistance:
. 500 hours salt spray resistant.
4 layouts with standard #16 contacts:
. 10, 19, 37, 60 contacts.
See «VGE1/FER1 Series - Railway Connectors»
catalog on www.souriau.com
See «847/848 Series - Power Supply up to 63A»
product news on www.souriau.com
Especially designed for light and harsh environment.
Its physical characteristics and performances are
appreciated in a large range of applications: military
ground equipment, heavy weapons, ...
Environment friendly:
. RoHS black zinc nickel: 848 Series.
. 500 hours salt spray.
Safety:
. DIN EN 60664-1 (VDE 0110-1) approved.
Reliable:
. Robust circular aluminum connector.
. Power supply up to 63A ( DC to 3 phase AC )
. Large variety of backshells and wide range of wire gauges and
current carrying capabilities.
Standards:
. VG96918 approved and qualified.
54 © 2012 - SOURIAU
Range Extension
Product range extension
851 Series
See «micro38999, A Complete Miniature Range»
catalog on www.souriau.com
See «851 Series - MIL-DTL-26482 Connectors»
catalog on www.souriau.com
Designed to ensure reliable and rapid electrical
connections thanks to a bayonet locking system.
General characteristics and lightweight compact
size contribute to successful adoption in numerous
applications.
High corrosion resistance:
. 500 hours salt spray.
Quick coupling:
. Bayonet coupling (1/3 turn).
Polarization:
. Five keys.
EMC requirements:
. Shielded plug available.
Endurance:
. 500 mating cycles.
A complete miniature range: threaded (8DA), break
away (8BA) & bayonet (8LTA). Space saving with
scoop proof connector for harsh applications.
A compact solution:
. Diameter up to 45% smaller than size 9 (D38999).
. Up to 50% shorter.
. Integrated backshell: Cost and space saving.
A high density solution:
. With #26 contacts (according to 39029).
. 5 layouts (size 3, 5 and 7 with #22 & #26).
Excellent features:
. Designed for D38999 requirements.
. IP67 sealing when mated.
. Stainless steel shell (1500 matings) & aluminum shell (500 matings).
RoHS and Cadmium free:
. Available in zinc nickel (RoHS) plating, as well as nickel and olive
drab cadmium.
www.souriau.com
contactmilaero@souriau.com
Connection Te chnologies
© Copyright SOURIAU October 2012 - All information in this document presents only general particulars and shall not form part of any contract. All rights reserved to SOURIAU for changes without prior notication or public announcement. Any duplication is prohibited, unless approved in writing.