G34304249024 - Carlo Gavazzi Group

Du line

Fieldbus Installationbus

Specifications are subject to change without notice (30.04.03) 1

Dupline®is a registered trademark. A product of the CARLO GAVAZZI Group

Power supply AC types

Installations cat. III (IEC 60664)

Rated operational voltage

through term. 21 & 22 230 230 VAC ± 15% (IEC 60038)

115 115 VAC ± 15% (IEC 60038)

024 24 VAC ± 15%

Frequency 45 to 65 Hz

Drop-out tolerance ≤40 ms

Power consumption Typ. 3.5 VA

Power dissipation ≤9 W

Transient protection volt. 230 4 kV

115 2.5 kV

024 800 V

Insulation voltage

Supply - Dupline®≥4 kVAC (rms)

Supply - Outputs ≥4 kVAC (rms)

Dupline®- Outputs ≥4 kVAC (rms)

Power supply DC types

Installation cat. III (IEC 60664)

Operational voltage

through term. 21 & 22 824

15 to 30 VDC (ripple included)

Ripple ≤3 V

Reverse-polarity protection Yes

Current consumption ≤100 mA

Inrush current ≤1 A

Transient protection volt. 800 V

Insulation voltage

Supply - Dupline®≥200 VAC (rms)

Supply - Outputs ≥4 kVAC (rms)

Dupline®- Outputs ≥4 kVAC (rms)

Product Description Ordering Key

Type: Dupline®

H4-housing

Receiver

No. of channels

Output type

Power supply

Output Module for Rollerblind Motors

Type G 3430 4249

• Up/down control of 2 rollerblind motors

• Up/down interlocking for each motor

•H4-housing

•For mounting on DIN-rail (EN 50022)

•LED-indications for supply Dupline®carrier and

motor up/down

•AC or DC power supply

•Channel coding by GAP 1605

Dupline®output module for

up/down control of two

rollerblind motors. A built-in

up/down interlocking function

protects the motors. Each

motor requires two Dupline®

channels, one for “UP” and

one for “DOWN”. There is a

Type Selection

Supply Ordering no.

4 channel

5 A/250 VAC

24 VAC G 3430 4249 024

115 VAC G 3430 4249 115

230 VAC G 3430 4249 230

15 to 30 VDC G 3430 4249 824

LED indication for “UP” and

“DOWN” for each motor. For

intelligent control of the

rollerblind motors it is

recommended to use the

Master Generator

G38900014230, which has

this function built in.

Output Specifications

Outputs

2 SPST x 2 SPDT relays

Isolated in groups of 2 x 2

Contact ratings (AgCdO) µ (micro gap)

Resistive loads AC 1 5 A/250 VAC (1250 VA)

DC 1 0.25 A/250 VDC (62 W)

Inductive loads AC 15 2.5 A/230 VAC

DC 13 5 A/24 VDC

Mechanical lifetime ≥30 x 106operations

Electrical lifetime

(at max load) AC 1 ≥2.0 x 105operations

Operating frequency ≤7200 operations/h

Insulation voltage

Outputs - Dupline®≥4 kVAC (rms)

Response time 1 pulse train

G 3430 4249 024

Supply Specifications

Du line

Fieldbus Installationbus

2Specifications are subject to change without notice (12.12.00)

Dupline®is a registered trademark. A product of the CARLO GAVAZZI Group

1876

432

21 282726

242322

Out

Power Supply

(+) (-)

G 3430 4249

General Specifications

Output OFF delay

Upon loss of Dupline®carrier 20 ms

Power ON delay Typ. 2 s

Power OFF delay ≤1 s

Indication for

Supply ON LED, green

Output ON 4 LEDs, red

(one per motor or direction)

Dupline®carrier LED, yellow

Environment

Degree of protection IP 20 B

Pollution degree 3 (IEC 60664)

Operating temperature -20° to +50°C (-4° to +122°F)

Storage temperature

-50° to +85°C (-58° to +185°F)

Humidity (non-condensing) 20 to 80%

Mechanical resistance

Shock 15 G (11 ms)

Vibration 2 G (6 to 55 Hz)

Dimensions

Material

(see Technical informations) H4-housing

Weight 300 g

Mode of Operation

As indicated on the wiring

diagram, there are two relays

in series to control each

motor. O1 is used to switch

Motor 1 ON/OFF and O2 is

used to control the direction

of Motor 1 UP/DOWN. Corre-

spondingly O3 (ON/OFF) and

O4 (UP/DOWN) are used to

control Motor 2. In this way, it

is made sure that the motors

are not controlled UP and

DOWN at the same time

(interlocking). O1, O2, O3 and

O4 may be coded individually

by means of the code pro-

grammer GAP 1605. The de-

fault setting of the module is

to switch all outputs off in

case of loss of Dupline®carri-

er signal.

The Master Generator

G38900014 provides intel-

ligent functions that makes it

easy for the user to control

the rollerblind motors individ-

ually or several at the same

time (all UP or all DOWN).

Wiring Diagram

Accessories

DIN-rail FMD 411

For further information, see "Accessories".

S: Signal wire

Dimensions (mm)

H4-housing