PLASTIC SILICON
INFRARED PHOTODARLINGTON
QSC133
www.fairchildsemi.com 2 OF 4 7/12/01 DS300359
1. Derate power dissipation linearly 2.00 mW/°C above 25°C.
2. RMA flux is recommended.
3. Methanol or isopropyl alcohols are recommended as cleaning agents.
4. Soldering iron 1/16” (1.6mm) minimum from housing.
5. != 880 nm, AlGaAs.
Parameter Symbol Rating Unit
Operating Temperature TOPR -40 to +100 °C
Storage Temperature TSTG -40 to +100 °C
Soldering Temperature (Iron)(2,3,4) TSOL-I 240 for 5 sec °C
Soldering Temperature (Flow)(2,3) TSOL-F 260 for 10 sec °C
Collector-Emitter Voltage VCE 30 V
Emitter-Collector Voltage VEC 5V
Power Dissipation(1) PD100 mW
ABSOLUTE MAXIMUM RATINGS (TA= 25°C unless otherwise specified)
PARAMETER TEST CONDITIONS SYMBOL MIN TYP MAX UNITS
Peak Sensitivity Wavelength !PS — 880 — nm
Reception Angle "— ±8 — Deg.
Collector-Emitter Dark Current VCE = 10 V, Ee = 0 ICEO — — 100 nA
Collector-Emitter Breakdown IC= 1 mA BVCEO 30 — — V
Emitter-Collector Breakdown IE= 100 µA BVECO 5——V
On-State Collector Current(5) Ee = 0.25 mW/cm2, VCE = 5 V IC(ON) 8.00 — — mA
Saturation Voltage(5) Ee = 0.25 mW/cm2, IC= 0.4 mA VCE(sat) — — 1.0 V
Rise Time VCC = 5 V, RL= 100 Ω, IC= 0.15 mA tr—20—
µs
Fall Time tf—50—
ELECTRICAL / OPTICAL CHARACTERISTICS (TA=25°C)