PD - 95369A IRFR2405PbF IRFU2405PbF Surface Mount (IRFR2405) l Straight Lead (IRFU2405) l Advanced Process Technology l Dynamic dv/dt Rating l Fast Switching l Fully Avalanche Rated l Lead-Free Description l HEXFET(R) Power MOSFET D VDSS = 55V RDS(on) = 0.016 G Seventh Generation HEXFET(R) Power MOSFETs from International Rectifier utilize advanced processing techniques to achieve extremely low on-resistance per silicon area. This benefit, combined with the fast switching speed and ruggedized device design that HEXFET power MOSFETs are well known for, provides the designer with an extremely efficient and reliable device for use in a wide variety of applications. The D-Pak is designed for surface mounting using vapor phase, infrared, or wave soldering techniques. The straight lead version (IRFU series) is for throughhole mounting applications. Power dissipation levels up to 1.5 watts are possible in typical surface mount applications. ID = 56A S D-Pak IRFR2405 I-Pak IRFU2405 Absolute Maximum Ratings Parameter ID @ TC = 25C ID @ TC = 100C IDM PD @TC = 25C VGS EAS IAR EAR dv/dt TJ TSTG Continuous Drain Current, VGS @ 10V Continuous Drain Current, VGS @ 10V Pulsed Drain Current Power Dissipation Linear Derating Factor Gate-to-Source Voltage Single Pulse Avalanche Energy Avalanche Current Repetitive Avalanche Energy Peak Diode Recovery dv/dt Operating Junction and Storage Temperature Range Soldering Temperature, for 10 seconds Max. Units 56 40 220 110 0.71 20 130 34 11 5.0 -55 to + 175 A W W/C V mJ A mJ V/ns C 300 (1.6mm from case ) Thermal Resistance Parameter RJC RJA RJA Junction-to-Case Junction-to-Ambient (PCB mount)* Junction-to-Ambient Typ. Max. Units --- --- --- 1.4 50 110 C/W * When mounted on 1" square PCB (FR-4 or G-10 Material) . For recommended footprint and soldering techniques refer to application note #AN-994 www.irf.com 1 12/03/04 IRFR/U2405OPbF Electrical Characteristics @ TJ = 25C (unless otherwise specified) RDS(on) VGS(th) gfs Parameter Drain-to-Source Breakdown Voltage Breakdown Voltage Temp. Coefficient Static Drain-to-Source On-Resistance Gate Threshold Voltage Forward Transconductance Qg Qgs Qgd td(on) tr td(off) tf Gate-to-Source Forward Leakage Gate-to-Source Reverse Leakage Total Gate Charge Gate-to-Source Charge Gate-to-Drain ("Miller") Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Min. 55 --- --- 2.0 30 --- --- --- --- --- --- --- --- --- --- --- IDSS Drain-to-Source Leakage Current LD Internal Drain Inductance --- LS Internal Source Inductance --- Ciss Coss Crss Coss Coss Coss eff. Input Capacitance Output Capacitance Reverse Transfer Capacitance Output Capacitance Output Capacitance Effective Output Capacitance --- --- --- --- --- --- V(BR)DSS V(BR)DSS/TJ IGSS Typ. Max. Units Conditions --- --- V VGS = 0V, ID = 250A 0.052 --- V/C Reference to 25C, ID = 1mA 0.0118 0.016 VGS = 10V, ID = 34A --- 4.0 V VDS = 10V, ID = 250A --- --- S VDS = 25V, ID = 34A --- 20 VDS = 55V, VGS = 0V A --- 250 VDS = 44V, VGS = 0V, TJ = 150C --- 200 VGS = 20V nA --- -200 VGS = -20V 70 110 ID = 34A 16 23 nC VDS = 44V 19 29 VGS = 10V 15 --- VDD = 28V 130 --- ID = 34A ns 55 --- RG = 6.8 78 --- VGS = 10V D Between lead, 4.5 --- 6mm (0.25in.) nH G from package 7.5 --- and center of die contact S 2430 --- VGS = 0V 470 --- pF VDS = 25V 100 --- = 1.0MHz, See Fig. 5 2040 --- VGS = 0V, VDS = 1.0V, = 1.0MHz 350 --- VGS = 0V, VDS = 44V, = 1.0MHz 350 --- VGS = 0V, VDS = 0V to 44V Source-Drain Ratings and Characteristics IS ISM VSD trr Qrr ton Parameter Continuous Source Current (Body Diode) Pulsed Source Current (Body Diode) Diode Forward Voltage Reverse Recovery Time Reverse RecoveryCharge Forward Turn-On Time Notes: Repetitive rating; pulse width limited by max. junction temperature. Starting TJ = 25C, L = 0.22mH R G = 25, IAS = 34A. ISD 34A, di/dt 190A/s, VDD V(BR)DSS, TJ 175C 2 Min. Typ. Max. Units Conditions D MOSFET symbol --- --- 56 showing the A G integral reverse --- --- 220 S p-n junction diode. --- --- 1.3 V TJ = 25C, IS = 34A, VGS = 0V --- 62 93 ns TJ = 25C, IF = 34A --- 170 260 nC di/dt = 100A/s Intrinsic turn-on time is negligible (turn-on is dominated by LS+LD) Pulse width 300s; duty cycle 2%. Coss eff. is a fixed capacitance that gives the same charging time as Coss while VDS is rising from 0 to 80% VDSS Calculated continuous current based on maximum allowable junction temperature. Package limitation current is 30A www.irf.com IRFR/U2405PbF 1000 1000 VGS 15V 10V 8.0V 7.0V 6.0V 5.5V 5.0V BOTTOM 4.5V VGS 15V 10V 8.0V 7.0V 6.0V 5.5V 5.0V BOTTOM 4.5V TOP I D , Drain-to-Source Current (A) I D , Drain-to-Source Current (A) TOP 100 100 4.5V 4.5V 20s PULSE WIDTH TJ = 25 C 10 0.1 1 10 10 0.1 100 Fig 1. Typical Output Characteristics RDS(on) , Drain-to-Source On Resistance (Normalized) I D , Drain-to-Source Current (A) 2.5 TJ = 25 C TJ = 175 C 100 V DS = 25V 20s PULSE WIDTH 6.0 7.0 8.0 9.0 VGS , Gate-to-Source Voltage (V) Fig 3. Typical Transfer Characteristics www.irf.com 10 100 Fig 2. Typical Output Characteristics 1000 5.0 1 VDS , Drain-to-Source Voltage (V) VDS , Drain-to-Source Voltage (V) 10 4.0 20s PULSE WIDTH TJ = 175 C 10.0 ID = 56A 2.0 1.5 1.0 0.5 0.0 -60 -40 -20 0 VGS = 10V 20 40 60 80 100 120 140 160 180 TJ , Junction Temperature ( C) Fig 4. Normalized On-Resistance Vs. Temperature 3 IRFR/U2405OPbF VGS = 0V, f = 1MHz Ciss = Cgs + Cgd , Cds SHORTED Crss = Cgd Coss = Cds + Cgd C, Capacitance (pF) 3200 Ciss 2400 1600 800 Coss 20 VGS , Gate-to-Source Voltage (V) 4000 ID = 34A VDS = 44V VDS = 27V VDS = 11V 16 12 8 4 FOR TEST CIRCUIT SEE FIGURE 13 Crss 0 1 10 0 100 0 VDS , Drain-to-Source Voltage (V) 60 80 100 Fig 6. Typical Gate Charge Vs. Gate-to-Source Voltage 1000 1000 OPERATION IN THIS AREA LIMITED BY RDS(on) 100 ID , Drain Current (A) ISD , Reverse Drain Current (A) 40 QG , Total Gate Charge (nC) Fig 5. Typical Capacitance Vs. Drain-to-Source Voltage 10 V GS = 0 V 0.8 10us 100 TJ = 175 C TJ = 25 C 1 0.4 1.2 1.6 2.0 VSD ,Source-to-Drain Voltage (V) Fig 7. Typical Source-Drain Diode Forward Voltage 4 20 2.4 100us 10 1ms TC = 25 C TJ = 175 C Single Pulse 1 1 10ms 10 100 VDS , Drain-to-Source Voltage (V) Fig 8. Maximum Safe Operating Area www.irf.com IRFR/U2405PbF 60 V DS LIMITED BY PACKAGE VGS 50 D.U.T. RG I D , Drain Current (A) RD + -VDD 40 VGS Pulse Width 1 s Duty Factor 0.1 % 30 Fig 10a. Switching Time Test Circuit 20 VDS 10 90% 0 25 50 75 100 125 150 175 TC , Case Temperature ( C) 10% VGS Fig 9. Maximum Drain Current Vs. Case Temperature td(on) tr t d(off) tf Fig 10b. Switching Time Waveforms Thermal Response (Z thJC ) 10 1 D = 0.50 0.20 0.10 0.1 PDM 0.05 0.02 0.01 t1 SINGLE PULSE (THERMAL RESPONSE) t2 Notes: 1. Duty factor D = t 1 / t 2 2. Peak T J = P DM x Z thJC + TC 0.01 0.00001 0.0001 0.001 0.01 0.1 t1 , Rectangular Pulse Duration (sec) Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case www.irf.com 5 15V DRIVER L VDS D.U.T RG + V - DD IAS 20V tp A 0.01 Fig 12a. Unclamped Inductive Test Circuit V(BR)DSS EAS , Single Pulse Avalanche Energy (mJ) IRFR/U2405OPbF 240 TOP 200 BOTTOM 160 120 80 40 0 25 tp ID 14A 24A 34A 50 75 100 125 150 175 Starting TJ , Junction Temperature ( C) Fig 12c. Maximum Avalanche Energy Vs. Drain Current I AS Fig 12b. Unclamped Inductive Waveforms Current Regulator Same Type as D.U.T. QG 50K QGS QGD 12V .2F .3F D.U.T. VG + V - DS VGS 3mA Charge IG ID Current Sampling Resistors Fig 13a. Basic Gate Charge Waveform 6 Fig 13b. Gate Charge Test Circuit www.irf.com IRFR/U2405PbF Peak Diode Recovery dv/dt Test Circuit Circuit Layout Considerations * Low Stray Inductance * Ground Plane * Low Leakage Inductance Current Transformer + D.U.T + - - + RG * * * * dv/dt controlled by RG Driver same type as D.U.T. ISD controlled by Duty Factor "D" D.U.T. - Device Under Test Driver Gate Drive P.W. Period D= + - VDD P.W. Period VGS=10V * D.U.T. ISD Waveform Reverse Recovery Current Body Diode Forward Current di/dt D.U.T. VDS Waveform Diode Recovery dv/dt Re-Applied Voltage Body Diode VDD Forward Drop Inductor Curent Ripple 5% ISD * VGS = 5V for Logic Level Devices Fig 14. For N-Channel HEXFET(R) Power MOSFETs www.irf.com 7 IRFR/U2405OPbF D-Pak (TO-252AA) Package Outline D-Pak (TO-252AA) Part Marking Information EXAMPLE: T HIS IS AN IRF R120 WIT H AS S EMBLY LOT CODE 1234 AS S EMBLED ON WW 16, 1999 IN T HE AS S EMBLY LINE "A" PART NUMBER INT ERNAT IONAL RECT IFIER LOGO Note: "P" in ass embly line position indicates "Lead-F ree" IRFU120 12 916A 34 AS S EMBLY LOT CODE DAT E CODE YEAR 9 = 1999 WEEK 16 LINE A OR PART NUMBER INT ERNAT IONAL RECT IFIER LOGO IRF U120 12 AS S EMBLY LOT CODE 8 34 DAT E CODE P = DES IGNAT ES LEAD-F REE PRODUCT (OPT IONAL) YEAR 9 = 1999 WEEK 16 A = AS S EMBLY S IT E CODE www.irf.com IRFR/U2405PbF I-Pak (TO-251AA) Package Outline Dimensions are shown in millimeters (inches) I-Pak (TO-251AA) Part Marking Information EXAMPLE: T HIS IS AN IRFU120 WIT H ASSEMBLY LOT CODE 5678 ASSE MBLE D ON WW 19, 1999 IN T HE ASSEMBLY LINE "A" PART NUMBER INTE RNAT IONAL RECT IF IER LOGO IRFU120 919A 56 78 ASSEMBLY LOT CODE Note: "P" in ass embly line pos ition indicates "Lead-Free" DAT E CODE YEAR 9 = 1999 WEEK 19 LINE A OR PART NUMBE R INT ERNAT IONAL RECTIF IER LOGO IRFU120 56 AS SEMBLY LOT CODE www.irf.com 78 DATE CODE P = DES IGNAT ES LEAD-F REE PRODUCT (OPTIONAL) YEAR 9 = 1999 WE EK 19 A = ASS EMBLY SIT E CODE 9 IRFR/U2405OPbF D-Pak (TO-252AA) Tape & Reel Information Dimensions are shown in millimeters (inches) TR TRR 16.3 ( .641 ) 15.7 ( .619 ) 12.1 ( .476 ) 11.9 ( .469 ) FEED DIRECTION TRL 16.3 ( .641 ) 15.7 ( .619 ) 8.1 ( .318 ) 7.9 ( .312 ) FEED DIRECTION NOTES : 1. CONTROLLING DIMENSION : MILLIMETER. 2. ALL DIMENSIONS ARE SHOWN IN MILLIMETERS ( INCHES ). 3. OUTLINE CONFORMS TO EIA-481 & EIA-541. 13 INCH 16 mm NOTES : 1. OUTLINE CONFORMS TO EIA-481. Data and specifications subject to change without notice. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information. 12/04 10 www.irf.com Note: For the most current drawings please refer to the IR website at: http://www.irf.com/package/