1
Data Sheet
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifi cations are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please approve our product
specifi cations or transact the approval sheet for product specifi cations before ordering.
http://www.murata.com/
1
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Capacitor type) > Single Circuit Type for Signal Lines
2011.11.2
oThis data sheet is applied for CHIP EMIFILr used for General Electronics equipment for your design.
EMIFILr (Capacitor type) Single Circuit Type for Signal Lines
NFM41C Series (1806 Size)
c Dimensions
(1)
(2)
(2)
(3)
1.5±0.3
4.5±0.3
0.4±0.3
1.6±0.3
1.0±0.2
0.3+0.3
–0.2
(in mm)
: Electrode
c Insertion Loss Characteristics (Main Items)
0
20
40
60
80
100
1 10 100 1000 2000
Frequency (MHz)
(50Ω - 50Ω)
Insertion Loss (dB)
NFM41CC223R2A3
NFM41CC222R2A3
NFM41CC102R2A3
NFM41CC471R2A3
NFM41CC221U2A3
NFM41CC101U2A3
NFM41CC470U2A3
NFM41CC220U2A3
c Equivalent Circuit
Input (Output)
(1)
Output (Input)
(3)
(2)
GND
No polarity.
c Packaging
Code Packaging Minimum Quantity
L180mm Embossed Tape 4000
BBulk(Bag) 500
c Rated Value (p: packaging code)
Part Number Capacitance Rated Current Rated Voltage Insulation Resistance (min.) Operating
Temperature Range
NFM41CC220U2A3p22pF 50/-20% 300mA 100Vdc 10000M ohm -55 to +125°C
NFM41CC470U2A3p47pF 50/-20% 300mA 100Vdc 10000M ohm -55 to +125°C
NFM41CC101U2A3p100pF 50/-20% 300mA 100Vdc 10000M ohm -55 to +125°C
NFM41CC221U2A3p220pF 50/-20% 300mA 100Vdc 10000M ohm -55 to +125°C
NFM41CC471R2A3p470pF 50/-20% 300mA 100Vdc 10000M ohm -55 to +125°C
NFM41CC102R2A3p1000pF 50/-20% 300mA 100Vdc 10000M ohm -55 to +125°C
NFM41CC222R2A3p2200pF 50/-20% 300mA 100Vdc 10000M ohm -55 to +125°C
NFM41CC223R2A3p22000pF 50/-20% 300mA 100Vdc 10000M ohm -55 to +125°C
Number of Circuit: 1
Continued on the following page.
2
Data Sheet
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifi cations are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please approve our product
specifi cations or transact the approval sheet for product specifi cations before ordering.
http://www.murata.com/
2
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Capacitor type) > Single Circuit Type for Signal Lines
2011.11.2
oThis data sheet is applied for CHIP EMIFILr used for General Electronics equipment for your design.
Continued from the preceding page.
c !Caution/Notice
!Caution (Rating)
Do not use products beyond the rated current and
rated voltage as this may create excessive heat
and deteriorate the insulation resistance.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profi le
where peak solder temperature is below the Tin melting
point is used. Please confi rm the solderability of Tin
plating termination chip before use.