5V/3.3V 2:1 MULTIPLEXER FEATURES DESCRIPTION 3.3V and 5V power supply options 275ps typical propagation delay High bandwidth to 3GHz min. 75k internal input pulldown resistors Q output will default LOW with inputs open or at VEE Available in 8-pin SOIC and 10-pin MSOP packages The SY10EP58V is a 2:1 multiplexer. The device is pin and functionally equivalent to the SY100EL58 device. PIN CONFIGURATION/BLOCK DIAGRAM PIN NAMES Pin NC 1 Da 2 1 SEL 4 0 Function 8 VCC Da, Db ECL Data Inputs 7 Q SEL ECL Select Inputs Q, /Q ECL Data Outputs MUX Db 3 SY10EP58V FINAL 6 /Q 5 VEE Available in 8-Pin SOIC or 10-pin MSOP package Rev.: A 1 Amendment: /1 Issue Date: January 2001 Micrel SY10EP58V ABSOLUTE MAXIMUM RATINGS(1) Symbol Rating Value Unit VCC Power Supply Voltage (VEE = 0) -6.0 to 0 V VEE Power Supply Voltage (VCC = 0) +6.0 to 0 V VI Input Voltage (VCC = 0V) Input Voltage (VEE = 0V) -6.0 to 0 +6.0 to 0 V V IOUT Output Current 50 100 mA TA Operating Temperature Range -40 to +85 C Tstore Storage Temperature Range -65 to +150 C -Continuous -Surge NOTE: 1. Permanent device damage may occur if ABSOLUTE MAXIMUM RATINGS are exceeded. This is a stress rating only and functional operation is not implied at conditions other than those detailed in the operational sections of this data sheet. Exposure to ABSOLUTE MAXIMUM RATlNG conditions for extended periods may affect device reliability. DC ELECTRICAL CHARACTERISTICS(1) VCC = 0V; VEE = -5.5V to -3.0V; VCC = 3.0V to 5.5V; VEE = 0V(2) TA = -40C Symbol IEE Parameter TA = +85C Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit 20 -- 40 20 30 40 22 -- 40 mA Output HIGH Voltage(4) -1135 -- -0885 -1070 -0945 -0820 -1010 -- -0760 mV VOL Output LOW Voltage(4) -1935 -- -1685 -1870 -1745 -1620 -1810 -- -1560 mV VIH Input HIGH Voltage -1210 -- -0885 -1145 -- -0820 -1085 -- -0760 mV VIL Input LOW Voltage -1935 -- -1610 -1870 -- -1545 -1810 -- -1485 mV IIH Input HIGH Current -- -- 150 -- -- 150 -- -- 150 A IIL Input LOW Current 0.5 -- -- 0.5 -- -- 0.5 -- -- A VOH Power Supply Current(3) TA = +25C D NOTES: 1. 10EP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and traverse airflow greater than 500lfpm is maintained. 2. Input and output parameters vary 1:1 with VCC. 3. VCC = 0V, VEE = VEE(Min) to VEE(Max), all other pins floating. 4. All loading with 50 to VCC - 3.0V. 2 Micrel SY10EP58V AC ELECTRICAL CHARACTERISTICS VCC = 0V; VEE = -5.5V to -3.0V; VCC = 3.0V to 5.5V; VEE = 0V TA = -40C Symbol TA = +25C TA = +85C Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit fMAX Maximum Toggle Frequency(1) TBD -- -- TBD -- -- TBD -- -- mA tPLH tPHL Propagation Delay to Output Differential D Q, /Q SEL Q, /Q 170 170 -- -- 350 350 190 190 275 275 375 375 210 210 -- -- 400 400 ps ps tr tf Output Rise/Fall Times (20% to 80%) 60 -- 190 60 130 200 70 -- 220 ps Q NOTE: 1. fMAX guaranteed for functionality only. VOL and VOH levels are guaranteed at DC only. PRODUCT ORDERING INFORMATION Ordering Code Package Type Operating Range Package Marking SY10EP58VZC Z8-1 Commercial HEP58 SY10EP58VZCTR Z8-1 Commercial HEP58 SY10EP58VKC K10-1 Commercial HP58 SY10EP58VKCTR K10-1 Commercial HP58 3 Micrel SY10EP58V 10 LEAD MSOP (K10-1) Rev. 00 4 Micrel SY10EP58V 8 LEAD PLASTIC SOIC (Z8-1) Rev. 03 MICREL-SYNERGY TEL + 1 (408) 980-9191 FAX 3250 SCOTT BOULEVARD SANTA CLARA CA 95054 + 1 (408) 914-7878 WEB USA http://www.synergysemi.com http://www.micrel.com This information is believed to be accurate and reliable, however no responsibility is assumed by Micrel for its use nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent right of Micrel Inc. (c) 2001 Micrel Incorporated 5