Specifications
Note 1) In case of ZSE40F/ZSE40/ISE40--
Note 2) In case of ZSE40F/ZSE40/ISE40--
30
70
30
70
30
70
22
62
30
70
Set pressure range Model
Note:
When equipped with auto shift function, the following ranges can be set.
Rated pressure range –100.0 to 100.0 kPa
–100.0 to 100.0 kPa
—
Output voltage: 1 to 5 V
±5% F.S. or less (in rated pressure range)
Linearity: ±1% F.S. or less
Output impedance: Approx. 1 kΩ
Output voltage: 1 to 5 V ±2.5% F.S. or less (in rated pressure range)
0.6 to 1 V ±5% F.S. or less (in extended analog output range)
Linearity: ±1% F.S. or less
Output impedance: Approx. 1 kΩ
500 kPa
0.1
—
Air, Non-corrosive/Non-flammable gas
12 to 24 VDC ±10%, Ripple (p-p) 10% or less (with power supply polarity protection)
55 mA or less
NPN or PNP open collector output: 2 output
80 mA
30 V (with NPN output)
1 V or less (with load current of 80 mA)
2.5 ms or less (Response time selections with anti-chattering function:24 ms, 192 ms and 768 ms)
With short-circuit protection
±0.2% F.S. ±1 digit or less
Variable (0 or above)
Fix (3 digits)
3 1/2-digit, 7 segment indicator (Sampling frequency: 5 times/sec)
2% F.S. 1 digit or less (With ambient temperature of 25C)
Green LED (OUT1: Lights when ON), Red LED (OUT2: Lights when ON)
No-voltage input (reed or solid state), input 5 ms or more
IP65
Operating: 0 to 50˚C, Stored: –10 to 60˚C (with no condensation or freezing)
Operating/Stored: 35 to 85% RH (with no condensation)
1000 VAC for 1 min. between live parts and case
50 MΩ or more (at 500 VDC) between live parts and case
10 to 500 Hz at the smaller of amplitude 1.5 mm or acceleration 98 m/s
2
in X, Y, Z directions for 2 hrs. each (De-energized)
980 m/s2 in X, Y, Z directions 3 times each (De-energized)
±2% F.S. or less of pressure measured at 25°C
01: R1/8, M5 x 0.8, T1: NPT1/8, M5 x 0.8, W1: Rc1/8
C4: With ø4 One-touch fitting, C6: With ø4 One-touch fitting, M5: M5 female threads
Oil-resistant cabtire cord 5 cores, ø3.5, Cross section: 0.15 mm2, Conductor O.D.: 0.97 mm
01/T1 types approx. 60 g, W1 type approx. 80 g, C4/C6/M5 types approx. 92 g (each including 0.6 m lead wires)
Compliant with CE marking
0.0 to –101.3 kPa
10.0 to –101.3 kPa
10.0 to 0 kPa
0.000 to 1.000 MPa
–0.100 to 1.000 MPa
–0.100 to 0 MPa
ZSE40F (Compound pressure) ZSE40 (Vacuum pressure) ISE40 (Positive pressure)
1.5 MPa
—
0.001
Set pressure range
Model
Withstand pressure
Extended analog output range
Set pressure resolution kPa
MPa
Applicable fluid
Power supply voltage
Current consumption
Switch output
Max. load current
Max. applied voltage
Residual voltage
Response time
Short circuit protection
Repeatability
Hysteresis Hysteresis mode
Window comparator mode
Display
Display accuracy
Operation indicator light
Analog output Note 1)
Auto shift input Note 2)
Environ-
mental
resistance
Enclosure
Ambient temperature range
Ambient humidity range
Withstand voltage
Insulation resistance
Vibration resistance
Impact resistance
Temperature characteristics
Port size
Lead wires
Mass
Standard
ZSE40F--
ZSE40--
ISE40--
–100.0 to 100 kPa
–101.3 to 101.3 kPa
–1.0000 to 1.000 MPa
Function
Various additional functions are available for easy measurement, switch operation and confirmation of measured values suitable for the
conditions of the measured fluid.
Auto shift function
Anti-chattering function
Key lock function
Peak hold function
Bottom hold function
Zero-out function
Unit conversion
Can correct the pressure set point value of switch output according to fluctuations in the primary pressure.
Prevents possible malfunction due to sudden fluctuations in the primary pressure by adjusting the response time.
Key operation can be locked to prevent any incorrect function of the operation switch.
Can retain the maximum pressure value displayed during measurement.
Can retain the minimum pressure value displayed during measurement.
The pressure display can be set at zero when the pressure is open to the atmosphere.
Can convert the display value.
Note 1) Select and order by specifying the types and models.
Note 2) Display blinks when using the peak and bottom hold functions.
Note 1)
Note 1)
Note 2)
Note 2)
707
High-Precision Digital Pressure Switch
Series ZSE40
/ISE40