SURFACE MOUNT DISPLAY ATTENTION KPSC03-127 GREEN OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES PRELIMINARY SPEC Description Features 0.3 INCH DIGIT HEIGHT. The Green source color devices are made with InGaN on LOW CURRENT OPERATION. SiC Light Emitting Diode. EXCELLENT CHARACTER APPEARANCE. Static electricity and surge damage the LEDS. I.C. COMPATIBLE. It is recommended to use a wrist band or anti-electrostatic MECHANICALLY RUGGED. glove when handling the LEDs. GRAY FACE,WHITE SEGMENT. All devices, equipment and machinery must be electrically grounded. PACKAGE : 550PCS / REEL. RoHS COMPLIANT. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO: DSAE7607 REV NO: V.4 DATE: AUG/22/2005 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG PAGE: 1 OF 4 Selection Guide Part No. Dice KPSC03-127 Iv (ucd) @ 10 mA Lens Type GREEN (InGaN) WHITE DIFFUSED Description Min. Typ. 4700 23130 Common Cathode, Rt. Hand Decimal. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device peak Peak Wavelength Green D Dominant Wavelength 1/2 Typ. Max. Units Test Conditions 520 nm IF=20mA Green 525 nm IF=20mA Spectral Line Half-width Green 38 nm IF=20mA C Capacitance Green 45 pF VF=0V;f=1MHz VF Forward Voltage Green 3.5 4.5 V IF=20mA IR Reverse Current Green 10 uA VR = 5V Absolute Maximum Ratings at TA=25C Parameter Green Units Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating/Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAE7607 REV NO: V.4 DATE: AUG/22/2005 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG PAGE: 2 OF 4 Green KPSC03-127 SPEC NO: DSAE7607 REV NO: V.4 DATE: AUG/22/2005 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG PAGE: 3 OF 4 KPSC03-127 Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity/ luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity/ luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAE7607 REV NO: V.4 DATE: AUG/22/2005 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG PAGE: 4 OF 4