continued from previous page
接上页
STAND ARD P ART NUMBERS 标准零件号码
TYPE DEM2815C (Magnetically Shielded, Quantity/reel; 2,000 PCS)
Part
Number Inductance(1)
(
H) Tolerance
(%)
DC
Resistance(2)
(m
) Max. (Typ.)
Decrease Current(3)
(A) Max. (Typ.)
=30%
Temperature
Rise Current(3)
T=40
C
(A) Max. (Typ.)
TYPE DEM2818C (Magnetically Shielded, Quantity/reel; 2,000 PCS)
Part
Number Inductance(1)
(
H) Tolerance
(%) DC
Resistance(2)
(m
) Max. (Typ.)
Decrease Current(3)
(A) Max. (Typ.)
=30%
Temperature
Rise Current(3)
T=40
C
(A) Max. (Typ.)
(1) Inductance is measured with a LCR meter 4284A (Agilent
Technologies) or equival ent.
Test frequency at 100kHz
DC resistanc e is measured with 34420A (Agilent Technologi es) or
3541(HIOKI). (Ref erence ambient temperature 25°C)
Maximum allowable DC current is that which causes a 30%
inductance reducti on from the initial value, or coil temperature to
rise by 40°C, whichever is smaller. (Reference ambient
temperature 20° C)
仪表
技术
或者功能相同的仪器在
下测
试电感值。
通过数码万用表34420A(Agilent技术)或者3541(HIOKI)测试直
流电阻。(环境温度为25°C)
允许最大直流电的范围是以下两者中比较小的一个:引起电感值
从最初值降低30%,或者线圈温度升高40°C。
(参考周围环境温度20°C)。
Ferrite Inductors
铁氧体功率电感器