VJ C0G (NP0) Vishay Vitramon Multilayer Ceramic Chip Capacitors FEATURES * C0G is an ultra-stable dielectric offering a Temperature Coefficient of Capacitance (TCC) of 0 30ppm/ C. RoHS COMPLIANT * Low Dissipation Factor (DF). * Ideal for critical timing and tuning applications. Insulation Resistance (IR): At + 25 C and rated voltage 100,000 M minimum or 1000 F, whichever is less. GENERAL SPECIFICATIONS NOTE: Electrical characteristics at + 25C unless otherwise specified. At + 125 C and rated voltage 10,000 M minimum or 100 F, whichever is less. Capacitance Range: 1.0 pF to 0.056 F. Temperature Coefficient of Capacitance (TCC): 0 30ppm/ C from - 55 C to + 125 C. Dielectric Withstanding Voltage (DWV): This is the maximum voltage the capacitors are tested for a 1 to 5 second period and the charge/discharge current does not exceed 50mA 100V DC : DWV at 250 % of rated voltage. Dissipation Factor (DF): 0.1 % maximum at 1.0 Vrms and 1 kHz for values > 1000 pF. 0.1 % maximum at 1.0 Vrms and 1 MHz for values 1000 pF. ORDERING INFORMATION VJ0805 A 102 K X A A T ### 3) CASE CODE DIELECTRIC CAPACITANCE NOMINAL CODE CAPACITANCE TOLERANCE TERMINATION DC VOLTAGE RATING 1) MARKING PACKAGING PROCESS CODE 0402 A = C0G (NP0) Expressed in picofarads (pF). The first two digits are significant, the third is a multiplier. An "R" indicates a decimal point. Examples: 102 = 1000 pF 1R8 = 1.8 pF C = 0.25 pF D = 0.5 pF F=1% G=2% J=5% K = 10 % NOTE: C, D < 10 pF F, G, J, K 10 pF X = Ni barrier 100% tin plated. F = AgPd 0603 0805 1206 1210 1808 1812 1825 2220 2225 X = 25V A = 50V B = 100V A = Unmarked M = Marked NOTE: Marking is only available for 0805 and 1206 T = 7" reel / plastic tape C = 7" reel / paper tape I = 7" reel / flamed paper tape R = 11 1/4" reel / plastic tape P = 11 1/4" reel / paper tape O = 11 1/4" reel / flamed paper tape NOTE: "I" and "O" is used for "F" termination Note 1. DC voltage rating should not be exceeded in application 3. Process Code may be added with up to three digits, used to control non-standard products and/or special requirements Document Number 45002 Revision 30-Feb-05 For technical questions contact MLCC@vishay.com www.vishay.com 5 VJ C0G (NP0) Vishay Vitramon Multilayer Ceramic Chip Capacitors C0G (NP0) DIELECTRIC STYLE VJ0402 VJ0603 VJ0805 VJ1206 EIA TYPE 0402 0603 0805 1206 VJ1210 1) VJ1808 1) VJ1812 1) VJ1825 1) VJ2220 1) VJ2225 1) 1210 - VOLTAGE (Vdc) 25 50 100 50 100 50 100 50 100 50 100 50 100 CAP. CAP. CODE 1R0 1.0 pF 1R2 1.2 pF 1R5 1.5 pF 1R8 1.8 pF 2R2 2.2 pF 2R7 2.7 pF 3R3 3.3 pF 3R9 3.9 pF 4R7 4.7 pF 5R6 5.6 pF 6R8 6.8 pF 8R2 8.2 pF 100 10 pF 120 12 pF 150 15 pF 180 18 pF 220 22 pF 270 27 pF 330 33 pF 390 39 pF 470 47 pF 560 56 pF 680 68 pF 820 82 pF 101 100 pF 121 120 pF 151 150 pF 181 180 pF 221 220 pF 271 270 pF 331 330 pF 391 390 pF 471 470 pF 561 560 pF 681 680 pF 821 820 pF 102 1000 pF 122 1200 pF 152 1500 pF 182 1800 pF 222 2200 pF 272 2700 pF 332 3300 pF 392 3900 pF 472 4700 pF 562 5600 pF 682 6800 pF 822 8200 pF 103 0.010 F 123 0.012 F 153 0.015 F 183 0.018 F 223 0.022 F 273 0.027 F 333 0.033 F 393 0.039 F 473 0.047 F 563 0.056 F Note 1 See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 www.vishay.com 6 For technical questions contact MLCC@vishay.com 1812 50 100 1825 50 - 100 50 100 50 100 Document Number 45002 Revision 30-Feb-05 VJ C0G (NP0) Vishay Vitramon Multilayer Ceramic Chip Capacitors C0G (NP0) DIELECTRIC - TYPICAL PARAMETERS TEMPERATURE COEFFICIENT OF CAPACITANCE VOLTAGE COEFFICIENT OF CAPACITANCE - NP0 0.2 % CAPACITANCE CHANGE % CAPACITANCE CHANGE 2.0 1.5 1.0 0.5 0.0 - 0.5 NP0 - 1.0 0.1 0.0 - 0.1 - 1.5 - 2.0 - 0.2 - 75 - 50 - 25 0 25 50 75 0 100 125 10 20 TEMPERATURE C 40 50 60 70 80 90 100 DC VOLTS APPLIED MINIMUM INSULATION RESISTANCE VS TEMPERATURE AGING RATE - NP0 0.2 10000 INSULATION RESISTANCE ( FARADS) % CAPACITANCE CHANGE 30 0.1 0.0 - 0.1 1000 100 10 - 0.2 1 10 100 1000 10000 10 Document Number 45002 Revision 30-Feb-05 25 100 125 TEMPERATURE C HOURS For technical questions contact MLCC@vishay.com www.vishay.com 7 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1