Multilayer Ceramic Chip Capacitors
VJ C0G (NP0)
Vishay Vitramon
Document Number 45002 For technical questions contact MLCC@vishay.com www.vishay.com
Revision 30-Feb-05 5
FEATURES
•C0G is an ultra-stable dielectric offering a
Temperature Coefficient of Capacitance (TCC)
of 0 ± 30ppm/ °C.
•Low Dissipation Factor (DF).
•Ideal for critical timing and tuning applications.
GENERAL SPECIFICATIONS
NOTE: Electrical characteristics at + 25°C unless otherwise
specified.
Capacitance Range: 1.0 pF to 0.056 µF.
Temperature Coefficient of Capacitance (TCC):
0 ± 30ppm/ °C from - 55 °C to + 125 °C.
Dissipation Factor (DF):
0.1 % maximum at 1.0 Vrms and 1 kHz for values > 1000 pF.
0.1 % maximum at 1.0 Vrms and 1 MHz for values ≤ 1000 pF.
Insulation Resistance (IR):
At + 25 °C and rated voltage 100,000 MΩ minimum or
1000 ΩF, whichever is less.
At + 125 °C and rated voltage 10,000 MΩ minimum or
100 ΩF, whichever is less.
Dielectric Withstanding Voltage (DWV):
This is the maximum voltage the capacitors are tested for
a 1 to 5 second period and the charge/discharge current does
not exceed 50mA
≤ 100V DC : DWV at 250 % of rated voltage.
Note
1. DC voltage rating should not be exceeded in application
3. Process Code may be added with up to three digits, used to control non-standard products and/or special requirements
ORDERING INFORMATION
VJ0805 A 102 K X A A T ### 3)
CASE
CODE
DIELECTRIC CAPACITANCE
NOMINAL CODE
CAPACITANCE
TOLERANCE
TERMINATION DC
VOLTAGE
RATING 1)
MARKING PACKAGING PROCESS
CODE
0402
0603
0805
1206
1210
1808
1812
1825
2220
2225
A = C0G (NP0) Expressed in
picofarads (pF).
The first two
digits are
significant, the
third is a
multiplier. An
“R” indicates a
decimal point.
Examples:
102 = 1000 pF
1R8 = 1.8 pF
C = ± 0.25 pF
D = ± 0.5 pF
F = ± 1 %
G = ± 2 %
J = ± 5 %
K = ± 10 %
NOTE:
C, D < 10 pF
F, G , J, K ≥ 10 pF
X = Ni barrier
100% tin
plated.
F = AgPd
X = 25V
A = 50V
B = 100V
A = Unmarked
M = Marked
NOTE: Marking
is only available
for 0805 and
1206
T = 7” reel / plastic tape
C = 7” reel / paper tape
I = 7” reel / flamed paper tape
R = 11 1/4” reel / plastic tape
P = 11 1/4” reel / paper tape
O = 11 1/4” reel / flamed paper tape
NOTE: “I” and “O” is used for
“F” termination
RoHS
COMPLIANT
www.vishay.com For technical questions contact MLCC@vishay.com Document Number 45002
6Revision 30-Feb-05
VJ C0G (NP0)
Vishay Vitramon Multilayer Ceramic Chip Capacitors
Note
1 See soldering recommendations within this data book, or visit www.vishay.com/doc?45034
C0G (NP0) DIELECTRIC
STYLE VJ0402 VJ0603 VJ0805 VJ1206 VJ1210 1) VJ1808 1) VJ1812 1) VJ1825 1) VJ2220 1) VJ2225 1)
EIA TYPE 0402 0603 0805 1206 1210 -1812 1825 - -
VOLTAGE (Vdc) 25 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100 50 100
CAP.
CODE CAP.
1R0 1.0 pF
1R2 1.2 pF
1R5 1.5 pF
1R8 1.8 pF
2R2 2.2 pF
2R7 2.7 pF
3R3 3.3 pF
3R9 3.9 pF
4R7 4.7 pF
5R6 5.6 pF
6R8 6.8 pF
8R2 8.2 pF
100 10 pF
120 12 pF
150 15 pF
180 18 pF
220 22 pF
270 27 pF
330 33 pF
390 39 pF
470 47 pF
560 56 pF
680 68 pF
820 82 pF
101 100 pF
121 120 pF
151 150 pF
181 180 pF
221 220 pF
271 270 pF
331 330 pF
391 390 pF
471 470 pF
561 560 pF
681 680 pF
821 820 pF
102 1000 pF
122 1200 pF
152 1500 pF
182 1800 pF
222 2200 pF
272 2700 pF
332 3300 pF
392 3900 pF
472 4700 pF
562 5600 pF
682 6800 pF
822 8200 pF
103 0.010 µF
123 0.012 µF
153 0.015 µF
183 0.018 µF
223 0.022 µF
273 0.027 µF
333 0.033 µF
393 0.039 µF
473 0.047 µF
563 0.056 µF
VJ C0G (NP0)
Multilayer Ceramic Chip Capacitors Vishay Vitramon
Document Number 45002 For technical questions contact MLCC@vishay.com www.vishay.com
Revision 30-Feb-05 7
C0G (NP0) DIELECTRIC - TYPICAL PARAMETERS
- 75 - 50 - 25 0 25 50 75 100 125
2.0
1.5
1.0
0.5
0.0
- 0.5
- 1.0
- 1.5
- 2.0
TEMPERATURE COEFFICIENT OF CAPACITANCE
NP0
TEMPERATURE °C
% CAPACITANCE CHANGE
0 102030 4050 6070 8090100
0.2
0.1
0.0
- 0.1
- 0.2
VOLTAGE COEFFICIENT OF CAPACITANCE - NP0
DC VOLTS APPLIED
% CAPACITANCE CHANGE
AGING RATE - NP0
HOURS
1 10 100 1000 10000
0.2
0.1
0.0
- 0.1
- 0.2
% CAPACITANCE CHANGE
TEMPERATURE °C
MINIMUM INSULATION
RESISTANCE VS TEMPERATURE
10 25 100 125
10000
1000
100
10
INSULATION RESISTANCE
(Ω FARADS)
Legal Disclaimer Notice
Vishay
Document Number: 91000 www.vishay.com
Revision: 08-Apr-05 1
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
