* Please visit the product pages on our website for the most up-to-date product information ABOUT SWITCHCRAFT, INC. Switchcraft, Inc. was established in 1946 to manufacture jacks, plugs and switches, from its original plant located on West Diversey Street in Chicago. The company moved to a larger facility at 1328 North Halsted Street in 1948, and in 1958, the operation moved to 5555 North Elston Avenue, which is still the headquarters of the corporation. CATALOG SECTIONS Connectors . . . . . . . . . . . 1-78 Jacks & Plugs . . . . . . . . . 79-162 Jack Panels . . . . . . . . . . . 163-238 Patch Cords and Molded Cable Assemblies . . . . . . . . . . . 239-268 In the 185,000-square-foot Chicago facility, Switchcraft manufactures electronic and elecromechanical components, including: * Jacks * Plugs * Connectors * Jackfields * Patch Panels * Patch Cords * Switches * EAC Power * Molded Cable Assemblies Receptacles Switches . . . . . . . . . . . . . 269-318 Index by Part Number . . . 319-328 With a basic line of over 5,000 standard products and thousands of variations, Switchcraft is proud to offer a limited lifetime warranty on all products. Switchcraft markets products both domestically and internationally through a network of manufacturers' representatives and independent distributors. In 1999, Switchcraft acquired the Conxall Corporation located in Villa Park, Illinois. Conxall was founded in 1971 as a manufacturer of sealed connectors for the marine industry. Today, the company offers a broad line of custom cable assemblies and connectors used in marine, industrial, sensor, communications and transportation applications. For more information contact Conxall at (630) 834-7504, or visit their website at www.conxall.com. LIMITED LIFETIME WARRANTY Switchcraft warrants all of its products to be of sound design, good materials and workmanship at the time of manufacture. Switchcraft will repair or replace at its discretion any product proven to be defective under normal use. Switchcraft's liabilty under the terms of this warranty is limited to the repair or replacement of defective products which have not been damaged through accident, abuse, misuse or unauthorized repair. Switchcraft shall in no case be liable for special or consequential damages of any nature. Visit us on the net: www.switchcraft.com Switchcraft(R). . . Consistently Excellent Since 1946sm ABOUT Switchcraft is a leading supplier of a broad line of components for the audio/video, broadcast, telecommunication, computer, medical, military, appliance, transportation and instrumentation industries. i PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information TABLE OF CONTENTS CONNECTORS AND RECEPTACLES Q-G(R) XLR CONNECTORS.........................................................1-30 Q-G(R) Connector Part Numbering System....................................2 Professional Series Q-G(R) Connector Part Numbering System .......2 Q-G(R) Audio Connectors A, AA, AND QGP Series....................3-4 Part Numbers - Male Cord Plugs/Female Cord Plugs ..................4 Q-G(R) Color Flex Reliefs/Flex Relief .............................................5 AAA XLR Connectors ................................................................6-7 P(*)M Gooseneck Plug, P(*)F Microphone Plug, R(*)MZ Cord Plug, R(*)FZ Cord Plug ...........................................8 D(*)M, D(*)F and D(*)FD Receptacles ..........................................9 T(*)F and T(*)FM Cord Plug With On-Off Switch ..........................9 B(*)F Receptacle, C(*)F Receptacle, B(*)M Receptacle, C(*)M Receptacle ........................................................................10 E Series Receptacles.............................................................11-15 EH Series Receptacles ...............................................................16 PQG(R) Receptacles................................................................17-18 PD Series - Plastic Panel Mount ...........................................19-21 Y3F, Y3FPC, Y3FDPC and Y3MPC Receptacles ........................22 F Series Receptacles ............................................................23-24 Q-G(R) Adapters, Accessories .....................................................25 Q-G(R) Wall Plate Receptacles ....................................................26 Q-G(R) Connector-Adapters.....................................................27-28 S*FM Audio Connector-Adapter .................................................28 Audio "Y" Adapters .....................................................................28 DMX Adapter ..............................................................................29 Q-G(R) Connector-Adapter Receptacles ......................................30 Z Matching Transformers, Series M(*)M, Series L(*)MN ............30 TINI Q-G(R) MINIATURE CONNECTORS .................................31-37 Tini Q-G(R) Audio Adapters ..........................................................31 TB(*)M AND TB(*)MB Receptacle,TLP(*) Looping Plug, Straight Female Looping Plug, Reverse Gender TQG Series .................33 TRA(*)M PC Mount Male Receptacle ........................................34 TRASM*M, TRAPC*M Series ...............................................34-36 TY(*)F and TY(*)FPC Receptacles,TYEF Escutcheons, TQG(*)F and TQG(*)M Connector Inserts, TBA(**) Audio Adapter .............................................................................37 HPC HIGH POWER AUDIO CONNECTORS ...........................38-40 EN3TMini WEATHERTIGHT CONNECTOR SERIES ..............41-45 2 - 8 pin Cord Connector, 9 - 18 pin Cord Connector ................43 2 - 8 pin Panel Connector, 9 - 18 pin Panel Connector .............44 2 - 8 pin Inline Connector, 2 - 8 pin Overmolded Cord and Inline Connector ..................................................................45 DIN CONNECTORS .................................................................46-55 Plugs .....................................................................................46-48 Panel Mount Receptacles .....................................................48-50 Right Angle PC Mount Receptacles .....................................51-52 Mini-DIN Right-Angle Receptacles, Right-Angle, PC Mount Receptacles ..........................................................................47-53 SMD Series ................................................................................54 DMD Series ................................................................................55 USB CONNECTORS ................................................................56-57 IEEE 1394 FIREWIRE CONNECTORS ...................................58-59 SLIM-LINE CONNECTORS ......................................................60-64 Cord Plugs .................................................................................60 Slim-Line Connector Part Numbering System, Cable Clamp and Strain Relief ................................................................................61 SL40-SL41 Male/Female Cord Plugs .........................................62 SL10-SL17 Male/Female Receptacles .......................................63 www.switchcraft.com SL18 Male/Female Receptacles ................................................64 CB CONNECTORS MICROPHONE CONNECTORS, MINI-CON MINIATURE CONNECTORS .......................................65 HP75BNC SERIES BNC CONNECTORS ................................66-67 EAC RECEPTACLES ...............................................................68-77 RAPC322 POWER INLET SOCKET .............................................78 JACKS AND PLUGS JACK SCHEMATICS ................................................................79-80 1/4" LONG FRAME TELEPHONE JACKS ...............................81-85 1/4" Jack Blocks .........................................................................86 BANTAM TYPE(R) JACKS ..........................................................87-90 TT-JAX(R) (.173") Telephone Jacks Bantam Type(R) ................87-88 TT-JAX(R) (.173") Telephone Twin Jacks Bantam Type(R) .............89 TT-JAX(R) (.173") Telephone Triple Jacks Bantam Type(R) ............90 RTT Series Miniature Telephone Jacks, Right Angle, PC Mount .........................................................91-92 .177" Enclosed Jacks .................................................................93 LITTEL JAX(R) 2- AND 3-CONDUCTOR, 1/4" PHONE JACKS ...............................................................94-109 Hi-D Jax(R) 2- and 3-Conductor .............................................96-99 Spring Lock PC Terminals for Hi-D Jax(R) .................................100 SN Series, RA Series Right-Angle Phone Jacks ..............101-105 500 Series Jack Covers ...........................................................106 Series E (Locking) and Thick Panel Phone Jacks ...................107 1/4" Extension Jacks and 1/4" Speaker Jacks .........................108 1/4" Shielded Phone Jacks, SF-Jax(R) Short Frame Jacks ...................................................................109 .141" MINIATURE PHONO JACKS .......................................109-111 3.5MM DUAL STEREO JACK ...............................................112-113 3.5MM SINGLE MONO AND STEREO JACKS ...................114-118 3.5MM SINGLE MONO JACKS ...................................................119 2.5MM SINGLE MONO AND STEREO JACKS ..........................120 .101" SUBMINIATURE PHONE JACKS ...............................121-122 RCA PHONO JACKS AND PHONO JACK SETS ................123-129 RIGHT ANGLE MINIATURE POWER JACKS ......................130-133 STRAIGHT MINIATURE POWER JACKS ............................134-135 VJ SERIES VIDEO JACKS ..........................................................136 MVJ SERIES VIDEO JACKS .......................................................137 MIL-TYPE 1/4" PHONE PLUGS ...........................................138-141 Littel Plug(R) Phone Plugs .........................................................139 MIL-TYPE 1/4" EXTENSION JACKS ...........................................142 (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery ii FAX: 773 792-2129 * Please visit the product pages on our website for the most up-to-date product information TELEPHONE PATCH ADAPTERS ..............................................142 BANTAM TYPE MINIATURE TELEPHONE PLUGS ............143-144 3.5MM HEAVY DUTY STEREO PLUGS .....................................156 .141" MINIATURE PHONE PLUGS .............................................157 .097" SUBMINIATURE PHONE PLUGS ......................................158 AUDIO ADAPTERS .....................................................................159 RCA PHONO PLUGS ...........................................................160-161 MINIATURE POWER PLUGS ......................................................162 JACK PANELS, PATCH PANELS, PATCH KITS AND JACKFIELDS AUDIO PATCHBAYS .............................................................163-190 Professional Punchdown Terminal (PPT) ..................................163 Front Access MTPFA/TTPFA Series ..................................164-165 MTP48K Wired Audio Series .............................................166-167 TTP96K Wired Audio Series ..............................................168-169 MTPH/TTPH Harness Audio Series...................................170-173 MTPBP/TTPBP Backpanel Series .....................................174-175 EZ NORM Patchbay Series ...............................................176-177 TT96 EDAC Series.............................................................178-179 TTP96K Patchkit Series ....................................................180-181 MT48K/MT52K Patchkit Series ..........................................182-183 MT48/MT52 Patchbay Series.............................................184-185 TTP96AS Patchbay Series ................................................186-187 Q-G(R)XLR Patchbay Series................................................188-189 HPC Patchbay Series................................................................190 RS 422 DATA PATCHBAY SERIES ......................................191-192 VIDEO PATCHBAYS .............................................................193-201 VPP Video Patchbay Series ..............................................193-195 MVP Midsize Video Patchbay Series ................................196-198 VAP Video/Audio Patchbay Series ....................................199-200 MBPK Video/Audio Patchbay Series ........................................201 TELECOM TYPE JACK PANELS .........................................202-238 Long Frame (1/4")Single Row Telephone Jack Panels ....202- 203 Long Frame (1/4") Twin Row Jack Panels ........................204-205 Long Frame (1/4") Modular Twin Row Jack Panels ..........206-209 Long Frame (1/4") Modular 3 Row Jack Panels .......................210 TT-Jax(R) (.173") Jack Panel Series 1600, A1600, B1600, C1600 ...................................................................211-214 Modular TT-JAX(R) (.173") Panels Blank Series TT51, TT53, TT56, TT59 .....................................215 TT Module Inserts - Series TT91, TT92 And TT93 ..................216 Modular TT-Jax(R) (.173") Jack Panels -Series TT5102000, PATCH CORDS AND MOLDED CABLE ASSEMBLIES MOLDED CABLE ASSEMBLIES ..........................................239-261 Design Materials and Features ................................................239 3.5MM Molded Cables .............................................................240 Power-Plug Battery Charger Plugs and Jacks .........................241 Power Plugs and Jacks Part Numbering System .....................242 EN3T MINI Weathertight Overmolded Cable Assemblies ........243 Cordette(R) and Cord Switch Assemblies ....................................44 Cordette(R) Switches .................................................................245 DIN Plugs ..........................................................................246-248 MIDI Cables ..............................................................................249 Miniature, Shielded, Molded Tini Q-G(R) Plugs .........................250 Molded Cable Assemblies for Multi-Pin Interconnection Part Numbering System ...........................................................251 Standard Multi-Pin Interconnection Cables ..............................252 Micro Plug(R) Subminiature Phone Plugs ..................................253 Tini Plug(R) Miniature Phone Plugs ...........................................254 Phono Plugs and Phono Extension Jacks ...............................255 Tini-Extension(R) Jacks ..............................................................256 Littel Plug(R) Phone Plugs ..................................................256-257 Extension Jax(R) Phone Jacks ...................................................257 Cable Clamp Bands, "Y" Junctions ..........................................258 Part Numbering System ...........................................................259 Standard Cable Guide ..............................................................260 Cross Reference Guide ............................................................261 AUDIO/VIDEO PATCHCORDS ............................................262- 267 1/4" Longframe Telephone Patch Cords, MIL Type 1/4" Patch Cords ........................................................................................262 Combination Patch Cords and MIL Type 1/4" Twin Patch Cords .............................................................263 Miniature TT(R) Braided Patch Cords .......................................264 Miniature TT(R) Molded Patch Cords and Telephone Couplers ..........................................................265 Video Patch Cords ...................................................................266 Broadcast Series 3-Conductor Bantam TT Patch Cords, Analog-AES/EBU Audio, and RS422 Patching ........................267 SWITCHES PUSHBUTTON SWITCHES IBS Series Miniature Keyboard Switches .................................269 IBS Keyboard Switch Pushbuttons ...........................................270 US Series Uniswitch(R) Switches ...............................................271 BXR Series Box Switch(R) Switches ..........................................272 Button-Switch(R) Switches, Tini-Switch(R) Switches ...................273 Littel-Switch(R) Switches ............................................................274 Hi-D Switch(R) PC Mount Switches, DA-Switch Switches .........275 Cord-Switch(R) Cord Switches, Cordette(R) Cord Switches ........276 SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 TABLE OF CONTENTS 1/4" COMMERCIAL PHONE PLUGS LITTEL-PLUG(R) PLUGS .......................................................145-147 Silent-Plug And Lug(R) Phone Plugs .........................................148 Audio Loudspeaker and Heavy Duty 1/4" Commercial Phone Plugs .................................................149-150 .206" Commercial Phone Plugs ...............................................151 1/4" Miti-Plug(R) Audio Plugs .....................................................152 1/4" Flat Plug Phone Plugs ......................................................153 Right-Angle Phone Plugs .........................................................154 1/4" Lock-Extension Jacks And Plugs ......................................155 TT5202000, TT5502000, TT5602000 ...............................217-218 TT-Jax(R) (.173") Twin Row and Three Row Jack Panels ....219-220 TT-Jax(R) (.173") Connectorized Jackfields - Series TT, 2-wire, 4-wire, 6-wire .........................................................221-229 TT(R) Lamps and Jewel Assemblies ..........................................230 Longframe Switchboard Switches ............................................231 Dummy Plugs and Hole Plugs .................................................232 TT(R) (Bantam) Circuit Guard Plugs ..........................................233 Miniature, Dummy Plugs, Hole Plugs .......................................234 Designation Strips .............................................................235-236 Kwik-Change(R) Designation Strips (Double Height) .................237 X-Wide(R) Vertical Designation Strips ........................................238 iii PHONE: 773 792-2700 TABLE OF CONTENTS * Please visit the product pages on our website for the most up-to-date product information Push-Lite(R) Switches and Indicators .................................277-281 Series PL9000 - PL(R) Indicators, Pushbutton/Indicator Screens, Color Filter Snap-Insserts, Optional Mounting Barriers, Light Divider ...............................................278 Part Numbering System ...........................................................279 Outline Dimensions ...........................................................280-281 SLIDE SWITCHES ...............................................................282-290 General Purpose Slide Switches ......................................284-287 Miniature Slide Switches ...................................................288-290 Side-Slide(R)/Miniature Slide Switches ......................................290 European Line Voltage Selector Switches ........................291-293 LEVER SWITCHES ..............................................................294-298 GENERAL PURPOSE STACK SWITCHES .........................299-300 MULTIPLE STATION SWITCHES .........................................301-302 Littel(R) Multi Switch ............................................................303-308 DW Multi-Switch ................................................................309-311 Tini(R) DW Multi-Switch ......................................................312-313 IBS Multi-Switch - Series IBS ...........................................314-315 Multi-Switch Pushbuttons ..................................................316-317 INDEX BY PART NUMBER ...................................................319-328 www.switchcraft.com (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery CONNECTORS & RECEPTACLES Q-G(R) CONNECTORS FAX: 773 792-2129 1 * Please visit the product pages on our website for the most up-to-date product information SECTIONALIZED VIEW - A3F Plug to B3M Receptacle MALE RECEPTACLE FEMALE CONNECTOR Panel Ground Terminal Latch Lock Insert set screw (Shell ground) Ground Terminal Pin Cable Clamp Strain Relief Insert Shell DESIGN FEATURES CONSTRUCTION: Sturdy, die-cast zinc with satin nickel finish or Black-Velvet(R) finish to withstand hard use - even abuse. Vel-Tone non-reflective finish on QGP connectors only. INSERT INSULATION: High-impact, molded thermoplastic provides high dielectric strength, and superior insulation resistance. Field-proven Switchcraft Q-G (R) (Quick-Ground) 3- through 7-contact audio connectors with ground terminal and ground contactors are available in a wide range of plugs and receptacles for microphones, test equipment, instrumentation, computers, video cameras, mixing consoles, tape recorders, PA and sound reinforcement, stereo systems and many more applications. Switchcraft Q-G(R) connectors feature a separate ground-terminal electrically integral with connector shell. Ground continuity between mating plugs is automatically accomplished through exclusive "Dual Point" grounding system. Socket and pin assemblies utilize "wedge-action" to insure firm, reliable positioning in connector shell. Inserts are easily removable for wiring and soldering. High-impact thermoplastic insures long reliable insert assembly life. Female connectors have latch lock feature to hold connectors firmly together. Plugs and receptacles are mechanically keyed for proper mating. Q-G (*) Series 3-, 4-, 5-, 6-, and 7-pin/contact connectors offer 4-, 5-, 6-, 7-, and 8-pin contact versatility when ground-terminal is used. Switchcraft QGP connectors; are compatible with 3- and 4-contact (Neutrik, Amphenol 91-850 and Excellite 91-450 Series, and Cannon XLR-3, XLR-4): 5-contact (Neutrik, Cannon XLR-5 and Amphenol Excellite 91-450 Series). Captive Design(R) Insert Screws LOCKING: Latchlock on female plugs and receptacles locks into groove in mating male connector to prevent accidental disconnect. Manual release of latchlock is required to separate connectors. Q-G connectors are also available with FAS-DISCONNECT detent in place of latchlock. QGP has diecast latchlock. FAS-DISCONNECT: FAS-DISCONNECT detent permits immediate disconnect of locked connectors with a 4-pound (1.8 kg) force. FAS-DISCONNECT connectors are not recommended for use in situations where strong or violent pulls on cable may occur and cause accidental disconnect. Available on Q-G connectors only. Insert screw engages as any conventional screw, except it is lefthand threaded. To disassemble the connector, turn screw counterclockwise down into insert (see illustration). DUAL PRESSURE PLATES: A*F and A*M Series provides secure cable lock and strain relief for all standard size cables. FLEX RELIEF: TPR cable flex relief bushings on cord plugs are keyed to shell. Standard bushing opening accepts cables from .21" to .3" diameter Bushings with other openings accommodate cables from .105" to .205" diameter and from .3" to .328" diameter. CONTACTS: Q-G female connectors are copper alloy, silver-plated, tarnish-resistant; male contacts are copper alloy, silver-plated, tarnish-resistant. Gold-plated female contacts are copper alloy. Male contacts are gold-plated. WIRING: Large, unique design solder cups make wiring fast and easy. Certain receptacles are also available with PC terminals for use with printed circuit boards. Grounding and Shielding Tightening the insert screw establishes continuity between ground terminal, ground contactors and connector housing. Upon engagement with a mating plug or receptacle, the ground circuit is automatically connected to the mating shell through the ground contactor. Any pin or contact can be grounded by "jumping" it to the ground terminal. Contact 1 engages before all other contacts and disengages after all other contacts. Insert assembly is now readily removed from shell. Note "Ground Terminal" area - large soldering cups make cable installation fast and easy. Unitized 1-piece insert eliminates possible loss of latchlock and spring. To reassemble, replace insert assembly into shell, align insert screw under hole in shell and secure insert by turning insert screw clockwise. This "wedges" insert against interior of shell providing a rigid connector assembly and positive electrical continuity between ground terminal and shell (see illustration). DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 CONNECTORS & RECEPTACLES Q-G (R) CONNECTORS 2 CONNECTORS & RECEPTACLES QG(R) PART NUMBERING SYSTEM PHONE: 773 792-2700 CONNECTORS & RECEPTACLES * Please visit the product pages on our website for the most up-to-date product information Q-G(R) CONNECTOR PART NUMBERING Number of Contacts Series A CORD PLUG WITH SCREW CABLE CLAMP AA CORD PLUG WITH CRIMP CABLE CLAMP AAA CORD PLUG WITH TWIST ON HANDLE B FRONT PANEL MOUNT USING NUT C FRONT PANEL MOUNT - CIRCULAR D FRONT PANEL MOUNT - RECTANGULAR 3-7 Gender Options M MALE F FEMALE D B FAS-DISCONNECT (FEMALE CONNECTORS) BLACK EPOXY FINISH FM BOTH (S SERIES) ST STRAIGHT PC TAILS RA RIGHT ANGLE PC TAILS MOMENTARY SWITCH ACTION M (T SERIES ONLY) PC PC TERMINALS (Y SERIES ONLY) N KNURLED COUPLING NUT (L SERIES ONLY) L FLEX RELIEF FOR .250" TO .328" CABLE O.D. S SEE NOTE 1. AU GOLD CONTACTS H HOUSING ONLY OPTIONS SHOWN IN ORDER OF APPEARANCE Z SCREWLESS STRAIN RELIEF E MODULAR FRONT PANEL MOUNT G WALL PLATE - 1 B SERIES MALE H WALL PLATE - 2 B SERIES MALES J WALL PLATE - 1 D SERIES FEMALE K WALL PLATE - 2 D SERIES FEMALE L MICROPHONE ADAPTER - INTERNAL THREAD M MICROPHONE ADAPTER - EXTERNAL THREAD N CAP PLUG P GOOSENECK MOUNT QG CONNECTOR INSERT R RIGHT-ANGLE CORD PLUG S MALE/FEMALE BARREL ADAPTER T CORD PLUG WITH ON-OFF SWITCH W RIGHT-ANGLE PANEL MOUNT Y REAR PANEL MOUNT NOTE 1: S HAS DIFFERENT DESIGNATIONS DEPENDING ON THE SERIES. FOR A, AA, AND T SERIES: SMALL FLEX RELIEF FOR .105" TO .205" CABLE OUTSIDE DIAMETER FOR B, C, AND D SERIES: SANDED FRONT FACE FINISH FOR G, H, J, AND K SERIES: STAINLESS STEEL WALL PLATE (STANDARD) FOR N SERIES: SHORTING WIRING INSTALLED NOTE 2: J, K AND T SERIES AVAILABLE IN FEMALE GENDER ONLY. G, H, L, M, N, AND W SERIES AVAILABLE IN MALE GENDER ONLY. PROFESSIONAL SERIES Q-G(R) CONNECTOR PART NUMBERING SYSTEM Series QGP Number Of Contacts PROFESSIONAL SERIES PROFESSIONAL SERIES CORD PLUG WITH CRIMP CABLE CLAMP 3 AQGP Model 22 FEMALE CORD PLUGS 23 MALE CORD PLUGS 62 63 RECTANGULAR FEMALE PANEL MOUNT RECTANGULAR MALE PANEL MOUNT DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery CONNECTORS & RECEPTACLES Q-G CORD PLUG CONNECTOR - A, AA AND QGP SERIES (R) FAX: 773 792-2129 3 * Please visit the product pages on our website for the most up-to-date product information Q-G (R) AUDIO CONNECTORS A, AA, AND QGP SERIES Sleek, streamlined shell Easy change flex relief for color coding Cable clamp Solid pins, silver plated for reliability "No screws" retention system Bifurcated high performance socket contacts Durable metal latch lock Rugged cable clamp to ground (no screws) Solder terminals Light green, high "Dual-point rotated for easy performance insert shell grounding" access & soldering QGP connectors (3 contacts only) feature Vel-Tone(R) non-reflective finish, gray TPR flex relief and plated pins/contacts for the most demanding applications. Preferred by audio professionals the world over, Switchcraft(R) QG(R) connectors feature unsurpassed durability and a choice of finishes and contact platings. Features include: * High performance inserts in traditional Switchcraft(R) green or black. * Solder terminals rotated for easier access and soldering. * All metal housing. AA Series Only * Rugged 1-piece cable clamp to relieve pulling and twisting stresses on terminations. * No Screws flex relief retention system. * Integral bump shell grounding system. SPECIFICATIONS ELECTRICAL Contact Resistance: 50 milliohm maximum, per pole. Current Rating: 3 pole - 15A, 4 pole - 10A, 5 and 6 pole - 7.5A, 7 pole - 5A @ 125VAC. Insulation Resistance: 1,000 M, minimum. Dielectric Withstanding Voltage: 1,000 V (rms). Capacitance: 2 pF between pins and 4 pF between pins and shell, maximum (AA3M and AA3F). MECHANICAL Insertion/Withdrawal Forces: 7 pound maximum, 5 pound nominal, insertion; 7 pound maximum, 5 pound nominal, withdrawal. Wire Size: #12 wire gauge solid; #14 wire gauge stranded (3 contact). #14 wire gauge solid; #16 wire gauge stranded (4 contact). #16 wire gauge solid; #18 wire gauge stranded (5 and 6 contact). #18 wire gauge solid; #20 stranded (7 contact). (Q-G and QGP). Rugged metal shell "No screws" retention system Standard nickel or black finish Easy change flex relief for color coding MATERIAL Q-G CONNECTORS (A AND AA SERIES) Shell: Die-cast zinc. Satin nickel finish, black velvet. Insert Insulation: Molded thermoplastic. Socket Contacts: Silver-plated copper alloy tarnish-resistant; bifurcated on 3-contact type. Gold is available Pin Contacts: Silver-plated copper alloy. Resists tarnishing, and provide excellent electrical conductivity. Gold is available. Latchlock: High-strength die-cast zinc. Latch Release: Steel, nickel-plated. Latch Detent: Formed stainless steel. Insert Screw: Stainless steel. Flex Relief: TPR (thermoplastic rubber). QGP CONNECTORS Shell: Die-cast zinc, non-reflective gray Vel-Tone(R) finish. Socket Contacts: Gold-plated copper alloy Pin Contact: Gold-plated copper alloy DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 CONNECTORS & RECEPTACLES Q-G (R) CORD PLUG CONNECTORS (continued) 4 CONNECTORS & RECEPTACLES QG(R) CORD PLUGS - A AND QGP SERIES PHONE: 773 792-2700 CONNECTORS & RECEPTACLES * Please visit the product pages on our website for the most up-to-date product information Q-G(R) CORD PLUG CONNECTORS (continued) AA(*)F CORD PLUG AA(*)FD CORD PLUG PART NUMBERS - MALE CORD PLUGS PART NUMBERS - FEMALE CORD PLUGS Advanced Q-G(R) Cord Plugs, Series AA(*)M and AQGP Advanced Q-G(R) Cord Plugs, Series AA(*)F and AQGP AA3F -- AA4F AA5F AA6F AA7F AA3FB AA3FBAU AA3FD AA3FL -- -- AA3FLD AA4FB -- AA4FD AA4FL AA5FB -- AA5FD AA5FL AA6FB -- AA6FD AA6FL AA7FB -- AA7FD AA7FL AQGP322 -- -- -- -- -- 3 3 4 5 6 7 Available on special order only; contact Switchcraft for price and delivery. A(*)F CORD PLUG AA(*)M CORD PLUG AA3M AA4M AA5M AA6M AA7M AA3MB -- AA5MB -- -- AA3MBAU -- -- -- -- AA3ML AA4ML AA5ML AA6ML AA7ML 3 4 5 6 7 AQGP323 -- -- -- -- All above part numbers have black flex relief installed. Contact Switchcraft for color flex relief. A(*)FD CORD PLUG A(*)M CORD PLUG *Number of insert contacts or pins must be specified to complete part number. Straight female cord plug with standard latchlock. Available in 3-7 pin versions. Straight female cord plug with FAS-DIS-CONNECT detent. PART NUMBERS - FEMALE CORD PLUGS PART NUMBERS - MALE CORD PLUGS Standard Q-G (R) Cord Plugs, Series A(*)F and QGP Satin Nickel Finish nContacts A3F A3FS3 A4F A5F A6F A7F Black Finish Silver 1 Gold 1 A3FB -- A4FB A5FB A6FB A7FB A3FBAU -- A4FBAU A5FBAU A6FBAU A7FBAU FasLarge DisFlex Connect Relief 2 A3FD -- A4FD A5FD -- -- A3FL -- A4FL A5FL -- -- Standard Q-G (R) Cord Plugs, Series A(*)M and QGP Insert QGP Series QGP322 -- -- -- -- -- 3 3 4 5 6 7 1. Contact plating. 2. Accepts cables from .25" (6.35 mm) to .328" (8.33 mm) diameter 3. Accepts cables from .105" (2.7 mm) to .205" (5.2 mm) Available on special order only; contact Switchcraft for price and delivery. Satin Nickel Finish Black Finish Silver 1 Gold 1 Large Flex Relief 2 QGP Series Insert Contacts A3M A3MS 3 A4M A5M A6M A7M A3MB -- A4MB A5MB -- -- A3ML -- A4ML A5ML -- -- QGP323 -- -- -- -- -- 3 3 4 5 6 7 A3MBAU -- A4MBAU A5MBAU A6MBAU A7MBAU All above part numbers have black flex relief installed. Contact Switchcraft for color flex relief. Available on special order only; contact Switchcraft for price and delivery. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Straight male cord plug. Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery CONNECTORS & RECEPTACLES Q-G(R) FLEX RELIEF FAX: 773 792-2129 5 * Please visit the product pages on our website for the most up-to-date product information Q-G (R) COLOR FLEX RELIEFS Rainbow color cable strain relief bushings can be specified to match or complement equipment decors or code individual or grouped connections for quick recognition. On special order, tan, pink and dark blue are available. Bushings accommodate cables from .21" to .30" diameter. Prepackaged, 25 per bag. Part Numbers 3 Pins/Contacts Female Male A3F A3M A3F01 A3M01 A3F02 A3M02 A3F03 A3M03 A3F04 A3M04 A3F05 A3M05 A3F06 A3M06 A3F07 A3M07 A3F08 A3M08 A3F09 A3M09 Flex Relief Color Black Brown Red Orange Yellow Green Blue Violet Gray White Special order only; contact Switchcraft for price and delivery. Q-G (R) FLEX RELIEF Small Cables .105 to .205 (2.7) (5.2) Flex relief bushing with small opening accommodates cables from .105" (2.7 mm) to .205" (5.2 mm). Standard size bushing accepts cables from .210" (5.3 mm) to .300" (7.6 mm) outside diameter. Bushing with large opening accommodates cables from .300" (7.6 mm) to .328" (8.3 mm). Larger cables are often needed for multiple-conductor instrumentation. Code letter "L" in last or second to last digit in part number indicates plug with large bushing. Code letter "S" in last or second to last digit in part number indicates plug with smaller bushing. Standard Cables .210 to .300 (5.3) (7.6) SWITCHCRAFT PART NUMBER K255 Package of 100 cable clamp screws. Large Cables .300 to .328 (7.6) (8.3) Special order only; contact Switchcraft for price and delivery. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 Flex Relief Only SR00 SR01 SR02 SR03 SR04 SR05 SR06 SR07 SR08 SR09 CONNECTORS & RECEPTACLES Q-G (R) CONNECTORS (continued) 6 CONNECTORS & RECEPTACLES AAA CONNECTORS PHONE: 773 792-2700 CONNECTORS & RECEPTACLES * Please visit the product pages on our website for the most up-to-date product information AAA CONNECTORS AAA SERIES Q-G(R) TWIST CONNECTOR Switchcraft introduces the AAA Series or Q-G(R) Twist XLR connectors.The Q-G(R) Twist Series is available in male or female cord plug, 3 through 7 pins or contacts. The unique features are the easy twist on combination handle/strain relief, and the reduced number of parts to assemble. With the insert built into the front shell, and the strain relief preloaded into the handle, the end user has only two parts to assemble - slide the handle onto the cable, solder the terminations, and twist on the handle. As the handle is tightened, the strain relief tightens around the outer jacket of the cable. A ramp on the strain relief keeps it from rotating around the cable jacket and twisting the cable. The strain relief was designed to accommodate the most popular cable sizes. A rugged die-cast metal handle insures optimum protection, and increases signal shielding. Popular options include black and gold finishes, as well as a lower cost plastic handle version. FEATURES AND BENEFITS SPECIFICATIONS ELECTRICAL 4 Contact #14 wire gauge solid 5 & 6 Contact #16 wire gauge solid 7 Contact #18 wire gauge solid Contact Resistance: 50 milliohm maximum, per pole. Current Rating @ 125VAC: 3 pole - 15A 4 pole -10A 5 & 6 pole - 7.5A 7 pole - 5A Insulation Resistance: 1,000 M, minimum. Dielectric Withstanding Voltage: 1,000 V (rms) Capacitance: 3 pF between pins and 6 pF between pins and shell, maximum MECHANICAL Insertion/Withdrawal Forces: 10 lbs. maximum, 8 lbs. nominal / 7 lbs. maximum, 5 pounds nominal. Wire Size: 3 Contact #12 wire gauge solid #14 wire gauge stranded * * * * * * * Only two pieces to assemble Easy twist on handle reduces assembly time Rugged die-cast metal handle Accepts cable OD's (.100" - .285") Black finish available Gold-plated pins/contacts available Lower cost plastic handle version available APPLICATIONS * * * * Audio Medical Instrumentation Process Controls #16 wire gauge stranded #18 wire gauge stranded #20 wire gauge stranded MATERIAL Shell: Die-Cast zinc with nickel finish or black chrome. Handle: Die cast with nickel finish or black chrome. Also black thermoplastic handle available. O Ring: TPR (Thermoplastic rubber). Insert Insulation: Molded thermoplastic. Socket Contacts: Silver plated copper alloy tarnish resistant; bifurcated on 3 and 4 contact types. Gold is available. Pin Contacts: Silver plated copper alloy. Resists tarnishing, and provides excellent electrical conductivity. Gold is available. Latch lock: High strength die cast zinc. Strain Relief: TPR Flex Relief: TPR (Thermoplastic rubber) CONNECTOR PART NUMBER SCHEME Series Pins/Contacts Gender Handle Material AAA 3 -7 pins 3 -7 pins F: Female M: Male P: Plastic Blank: Metal Housing Finish B: Black Blank: Nickel DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Terminal Finish AU: Gold Blank: Silver Z New Strain Relief Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery CONNECTORS & RECEPTACLES AAA CONNECTORS FAX: 773 792-2129 7 * Please visit the product pages on our website for the most up-to-date product information CONNECTORS & RECEPTACLES AAA CONNECTORS (continued) DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 8 CONNECTORS & RECEPTACLES Q-G (R) CORD PLUG CONNECTORS PHONE: 773 792-2700 CONNECTORS & RECEPTACLES * Please visit the product pages on our website for the most up-to-date product information Q-G(R) CONNECTORS (continued) R(*)MZ CORD PLUG R(*)FZ CORD PLUG Right angle, female cord mount plug, latching. New style incorporates an insert that can rotate every 45 for added flexibility in tight applications. Also utilizes the new strain relief system with twist-on handle. Part Number R3FZ R4FZ R5FZ R6FZ R7FZ Right angle, male cord mount plug, latching. New style incorporates an insert that can be rotated every 45 for added flexibility in tight applications. Also utilizes the new strain relief system with twist-on handle. Part Number R3MZ R4MZ R5MZ R6MZ R7MZ Insert Contacts 3 4 5 6 7 Accepts cable O.D.'s .100"-.285" For black finish, add "B" suffix. For black/gold finish, add "BAU" suffix. Accepts cable O.D.'s .100"-.285" For black finish, add "B" suffix. For black/gold finish, add "BAU" suffix. P(*)F MICROPHONE PLUG Female microphone plug for gooseneck mount. Fits standard gooseneck with external 5/8-27 thread. Microphone plugs directly into connector. (Gooseneck not supplied.) Part Number 1 P3F P4F P5F Insert Pins 3 4 5 6 7 P(*)M GOOSENECK PLUG Male plug for gooseneck mount. Fits standard gooseneck with internal 5/8-27 thread. Use on gooseneck with microphone plug on opposite end. Plugs directly into female receptacle. (Gooseneck not supplied.) Insert Contacts 3 4 5 1. Satin Nickel Finish. (standard) 2. Large flex relief accepts cable from .25" to .328" diameter. (optional) 3. Gold-plated contacts. (optional) Available on special order only; contact Switchcraft for price and delivery. Part Number 1 P3M P4M P5M DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Insert Pins 3 4 5 Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery CONNECTORS & RECEPTACLES (R) Q-G CORD PLUG CONNECTORS AND RECEPTACLES FAX: 773 792-2129 9 * Please visit the product pages on our website for the most up-to-date product information T(*)F AND T(*)FM CORD PLUG WITH ON-OFF SWITCH Part Number T3F T3FM T4F T4FM Part Number T3FL T3FLM T4FL T4FLM Insert Contacts 3 3 4 4 T(*)F Straight female cord plug with DPDT (2-C) locking on-off switch; standard latchlock. T(*)FM Straight female cord plug with SPDT (1-C) momentary on-off switch; standard latchlock. Slide switches rated 500 mA, 125V (AC or DC). Mounting screws are supplied. D(*)M, D(*)F AND D(*)FD RECEPTACLES Studio quality black and gold Q-G(R) receptacle with black housing and gold contacts is designed for low/stable contact resistance and withstands corrosion where highest quality is required for recording and broadcast studio equipment, consoles, and other applications. D(*)M SERIES - Male receptacle for panel or chassis mounting. Special rectangular flange permits close spacing on crowded panels, has two .136" (3.45mm) diameter countersunk holes for #5-40 flat head mounting screws (not supplied). Mounts from front of panel or chassis in .766" (19.45) diameter hole. Satin nickel finish (Series D*M) or black finish (Series D*MB, or D*MBAU). D(*)F SERIES - Female receptacle for panel or chassis mounting. Flange has two .136" (3.45 mm) diameter countersunk holes for #5-40 flat head mounting screws (not supplied). Mounts from front of panel or chassis in .953" (24.21 mm) diameter hole. Series D(*)F has standard latchlock; Series D(*)FD has FAS-DISCONNECT detent. Satin nickel finish (Series D*F and D*FD) and "Black-Velvet" finish (Series D*FBAU). Nickel Finish D3M D4M D5M D6M D7M D3F D4F D5F D6F D7F Black Finish Silver Gold D3MB D4MB D5MB D6MB D7MB D3FB D4FB D5FB D6FB D7FB D3MBAU D4MBAU D5MBAU D6MBAU D7MBAU D3FBAU D4FBAU D5FBAU D6FBAU D7FBAU Detent QGP Series1 Pins -- -- -- -- -- D3FD D3FDB -- D6FDB -- QGP363 -- -- -- -- QGP362 -- -- -- -- 3 4 5 6 7 3 4 5 6 7 * Number of insert contact or pins must be specified to complete part number. Available on special order only; contact Switchcraft for price and delivery. 1 Non-reflective gray finish, gold-plated pins. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 CONNECTORS & RECEPTACLES Q-G(R) CORD PLUG CONNECTORS AND RECEPTACLES 10 CONNECTORS & RECEPTACLES Q-G(R) RECEPTACLES PHONE: 773 792-2700 CONNECTORS & RECEPTACLES * Please visit the product pages on our website for the most up-to-date product information Q-G(R) RECEPTACLES (continued) B(*)F RECEPTACLE B(*)M RECEPTACLE Panel-mount female receptacle. Mounts with spanner nut from front of panels up to .4375" (11.11 mm) thick. Slot in threaded part of housing permits non-turn mounting. Requires 1.25" (31.75 mm) diameter minimum mounting hole. Spanner nut is die-cast zinc with satin nickel finish (Series B*F) or black finish (Series B*FB). Panel-mount male receptacle. Mounts with locknut from front of panels up to .250" (6.35 mm) thick. Requires .812" (20.64 mm) diameter mounting hole. For non-turning mounting, can be keyed to "D" shaped panel hole, or S3519 mounting adapter can be used. Satin nickel finish (Series B*M) or black finish (Series B*MB). Part No.1 Part No.2 B3M B3MB B4M -- B5M -- B6M -- B7M -- Part No.1 Part No. 2 Insert Contacts B3F B3FB 3 B4F -- 4 B5F -- 5 B6F -- 6 B7F -- 7 Insert Pins 3 4 5 6 7 C(*)F RECEPTACLE C(*)M RECEPTACLE Female receptacle for panel or chassis mounting. Flange has three .140" (3.57 mm) diameter holes for #5-40 mounting screws (not supplied). Mounts from front of panel or chassis in 0.953" (24.21 mm) diameter hole. Male receptacle for panel or chassis mounting. Flange has three .140" (3.57 mm) diameter holes for #5-40 mounting screws (not supplied). Mounts from front of panel or chassis in .766" (19.45 mm) diameter hole. Part No.1 C3F C4F C5F C6F C7F Part No. 5 QGP326 -- -- -- -- Insert Contacts 3 4 5 6 7 Part No. 1 Part No.5 C3M QGP327 C4M -- C5M -- C6M -- C7M -- Insert Pins 3 4 5 6 7 Special order only. Contact Switchcraft. 1. Satin nickel finish. (standard) 2. "Black-Velvet" finish. (optional) 3. Gold-plated contacts. (optional) 4. Fas-disconnect detent. (optional) 5. Non-reflective gray finish, gold-plated pins. (standard) DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery CONNECTORS & RECEPTACLES E SERIES Q-G(R) RECEPTACLES FAX: 773 792-2129 11 * Please visit the product pages on our website for the most up-to-date product information CONNECTORS & RECEPTACLES E SERIES RECEPTACLES E Series Receptacles Conical Spring Solder Terminals Straight PC Terminals Solder cup Right Angle PC Terminals E Series Q-G(R) Receptacles are available with quick release inserts. Quick insert release is accomplished by turning screw lock from front of insert. Insert can then be removed from the rear. For PC board applications, insert can be removed/assembled to the housing while soldered to the PC board. E Series receptacles can be specified as complete assemblies, or as separate inserts and housings. Stocking separate inserts and housings offer considerable cost and time savings by minimizing inventory and maximizing configuration possibilities. FEATURES 3. Right-angle PC terminals - direct termination to PC board at a right-angle. Housing mounts to panel. 4. SC - Solder cup * * * * Replaces Neutrik D Series 3-pin contact; male and female types Both male and female fit in same panel cutout Choice of 4 terminations; solder cups, conical springs, straight or right angle PC terminals. * Inserts and housings can be specified separately * Quick release inserts for ease of removal * Locking receptacles * Protected ground clip minimizes scooping damage * Insert lock detent resists disassembly from shock or vibration during normal handling and transportation * Silver and gold-plated contacts available * Rugged metal shells; black or satin nickel finishes * Through-the-shell ground connection and all-metal shells for greater shielding effectiveness * Compatible with Switchcraft Q-G (R), QGP and other connectors with similar configurations SPECIFICATIONS ELECTRICAL Contact Resistance: 50 milliohms maximum, per pole. Current Rating: 15A Insulation Resistance: 2 X 106 M Dielectric Resistance: 1,000 V rms Capacitance: 10 pF MECHANICAL Insertion/Withdrawal Forces: 7 pounds maximum / 5 pounds nominal insertion; 7 pounds maximum / 5 pounds nominal withdrawal. Life: 10,000 operations (minimum). ENVIRONMENTAL QUICK RELEASE INSERT In two simple steps, inserts can be released while housing stays fastened to the panel. 1. With a small screwdriver, twist insert locking screw from front of insert. 2. Remove insert from the rear of the housing. Thermal Range: -55 C to +85 C Humidity: Meets MIL-STD-202F, method 106E. Thermal Shock: Meets MIL-STD-202F, method 107D. Salt Spray: Meets MIL-STD-202F, method 101D. TERMINALS Shells: Die-cast; satin-nickel or Black Velvet. Inserts: Glass-filled thermoplastic. Socket Contacts: Copper alloy, silver- or gold-plated. Pin Contacts: Copper alloy, silver- or gold-plated. Latch Release: Steel, nickel-plated. Insert Locking Cam: Die-cast zinc. Four terminations are available on E Series receptacles: 1. Conical Spring Solder terminals - conical spring on each pin holds wire in place providing constant pressure during soldering process. This effectively acts as a third hand, assuring a high quality solder termination. Housing mounts to panel. 2. Straight PC terminals - direct termination to PC board. Housing mounts to panel. MATERIAL DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 12 CONNECTORS & RECEPTACLES E SERIES PART NUMBERING SYSTEM PHONE: 773 792-2700 CONNECTORS & RECEPTACLES * Please visit the product pages on our website for the most up-to-date product information E SERIES PART NUMBERING SYSTEM CONNECTOR PART NUMBER SCHEME Series Pins/ Gender Contacts E 3-5 pins F: Female M: Male Fas-disconnect Option D: Fas-disconnect Blank: Standard locking Termination Style ST: Straight PC terminals RA: Right angle PCterminals SC: Solder cups Blank: Conical springs* Housing Finish B: Black Blank: Nickel Terminal Finish AU: Gold Blank: Silver Mounting Hole Options M3: M3 x 0.5 thread 440: #4-40 thread Blank: Countersunk hole HOUSING ONLY PART NUMBER SCHEME Series Pins/ Housing Mounting Hole Contacts Finish Options E F: Female B: Black M3: M3 x 0.5 thread M: Male Blank: Nickel 440: #4-40 thread Blank: Counter-sunk hole INSERT ONLY PART NUMBER SCHEME Series Pins/ Contacts E 3-5 pins Gender F: Female M: Male Fas-disconnect Option D: Fas-disconnect Blank: Standard locking Termination Style ST: Straight PC terminals RA: Right angle PC terminals SC: Solder cups Blank: Conical springs* Housing Finish Terminal Finish AU: Gold Blank: Silver *3-pin only DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery CONNECTORS & RECEPTACLES E SERIES FAX: 773 792-2129 13 * Please visit the product pages on our website for the most up-to-date product information CONNECTORS & RECEPTACLES E SERIES DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 14 CONNECTORS & RECEPTACLES E SERIES PHONE: 773 792-2700 CONNECTORS & RECEPTACLES * Please visit the product pages on our website for the most up-to-date product information E SERIES (continued) DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery CONNECTORS & RECEPTACLES E SERIES FAX: 773 792-2129 15 * Please visit the product pages on our website for the most up-to-date product information CONNECTORS & RECEPTACLES E SERIES (continued) DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 16 CONNECTORS & RECEPTACLES EH SERIES RECEPTACLES PHONE: 773 792-2700 CONNECTORS & RECEPTACLES * Please visit the product pages on our website for the most up-to-date product information EH SERIES RECEPTACLES The EH Series consist of different styles of popular connectors in our E Series housing. This allows the end user to punch one single hole size and populate wall plates, gang assemblies with different types of connectors. Connector styles include BNC feed-throughs, RCA feed-throughs, USB feed-throughs, IEEE 1394 Firewire feed-throughs, BNC to solder cup, and RCA to BNC. EHBNC2 FEATURES * Utilizes same panel cut-out as E Series QG connectors * Rugged metal shells * Available with a wide variety of popular feed-through connectors EHRCA2 EHBNC2 EHRCA2 EHBNCSC EHRCABNC Part Number EHBNC2 EHBNCSC EHRCA2 EHRCABNC EHUSB2 EH13942 EHCAT62 Description BNC to BNC BNC to solder cup RCA to RCA RCA to BNC USB to USB IEEE1394 to IEEE1394 Cat6 to Cat6 DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery CONNECTORS & RECEPTACLES PQG(R) RECEPTACLES FAX: 773 792-2129 17 * Please visit the product pages on our website for the most up-to-date product information PQG3FRA112 PQG3MRA112 Q-G(R) 3 pin/contact PC receptacles offer economy, reliability and performance in amplifiers, audio mixing boards, and other outboard gear. Choose receptacles with just the right combination of standard and optional bonus features to tailor the PQG series to your exact needs. STANDARD FEATURES * UL 94V-0 plastic materials. * Circuit #1 "makes" first and "breaks" last during connect/disconnect. * Positive mechanical polarization. * Minimum PC board space required. * Integral PC board locating posts. * Mating/unmating cycles in excess of 10,000. * Mates with Switchcraft Q-G and other compatible connectors. PQG3FST112 PQG3MST112 SPECIFICATIONS Housing: Black, glass-filled thermoplastic, UL 94V-0. Flange mounting holes are .128 inch diameter Socket Contacts: Copper alloy, electrotinned. Pin Contacts: Copper alloy, electrotinned. Latch Release: Steel, nickel-plated. Mounting Plate: Copper alloy. Shell-to-Ground Terminals: Copper alloy, electrotinned. Latches: Copper alloy, nickel-plated. Insertion/Withdrawal Forces: 2 pound (nominal). Contact Resistance: .05 ohms per pole (maximum). Dielectric Withstanding Voltage: 1,000 V rms for 1 minute. Insulation Resistance: 104 M @ 500 V DC. Current Capacity: 10A maximum (carry only). Operating Temperature: -30F to 185F (-34C to 85C). Mechanical Life: 10,000 cycles @ 10 cpm. OPTIONAL FEATURES * Positive latch lock or FasDisconnect (female only). * Shell-to-ground terminal. * Mounting Plates: A. Backup Mounting Plate with two, M3 x 0.5 threaded holes for faster, more rugged mounting to equipment panel/chassis. B. "Tri-Mounting" Plate...plus two bifurcated pcb retainers with snap-in terminals which perform three valuable functions: 1. Provide ground connection from panel to PCB. 2. Hold connector securely to PCB during wave-soldering. 3. Add strength between panel/chassis and PCB during soldering by "wicking" solder through the PCB and up sides of retainers to assure continuity. C. Two panel grounds are integral with mounting plate. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 CONNECTORS & RECEPTACLES PQG(R) RECEPTACLES 18 CONNECTORS & RECEPTACLES PQG(R) SERIES PART NUMBERING SYSTEM PHONE: 773 792-2700 CONNECTORS & RECEPTACLES * Please visit the product pages on our website for the most up-to-date product information PQG(R) SERIES PART NUMBERING SYSTEM P Q G 3 SERIES PQG- PINS/ CONTACTS Composite QG 3 GENDER F - Female M - Male PC TERMINALS RA - Right Angle, Bottom Exit ST - Straight Rear Exit LATCHING 0 - None 1 - Latch Lock 2 - FasDisconnect (female only) DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com GROUND TERMINAL 0 - None 1 - Installed MOUNTING PLATE 0 - None 1 - Plate with two, M3 x 0.5 threaded holes 2 - Plate with two, M3 x 0.5 threaded holes, panel grounds and PCB retainers Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery CONNECTORS & RECEPTACLES (R) Q-G AUDIO RECEPTACLES FOR PC/PANEL MOUNT FAX: 773 792-2129 19 * Please visit the product pages on our website for the most up-to-date product information See for N Next P ag e Cup w Sold e Opti er on PD SERIES - PLASTIC PANEL MOUNT NEW Bifurcated PCB Terminals PD3FS2 PD3MS1 PD3FRL1 PD3FRML1 PD3MRML1 PD3FS2 PD3FRA1 Bifurcated PCB Terminals Switchcraft offers the PD Series (plastic panel mount) audio connectors with a wide variety of 3-pin/contact, male and female types and many terminals for combined PC/panel mount. Female types offer larger contact area for higher ratings and longer life. Panel mounting may be at users option, either front or rear. New PD series connectors mate with Switchcraft Q-G and other compatible types. PD SERIES FEATURES * * * * * * 3 pins/contacts Male and female Straight and right-angle terminals PC or PC/panel mount Front or rear panel mount Special PC/solder terminal type with exits at 0 (down, 90 (right), 180 (top), and 270 (left) * Rugged molded black glass-filled thermoplastic housings. SPECIFICATIONS Housing: Black molded thermoplastic, glass-filled. Ground Pin: Copper alloy. Stamped Terminals/Contacts: Copper alloy, electrotinned. Screw Machine Terminals/Pins: Copper alloy, silver-plated. BIFURCATED PC TERMINALS Bifurcation configuration for PC terminals on selected connectors offers these advantages. 1. Provides convenient snap-in retention for mounting. 2. Holds connector securely to PCB during wavesoldering. 3. Adds strength to all terminal connections by solder "wicking" through PCB and up sides of terminals. BIFURCATED HOLD-DOWN FEATURE FOR ALL PC TERMINALS DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 CONNECTORS & RECEPTACLES Q-G(R) AUDIO RECEPTACLES FOR PC/PANEL MOUNT 20 CONNECTORS & RECEPTACLES PD SERIES PART NUMBERING SYSTEM PHONE: 773 792-2700 CONNECTORS & RECEPTACLES * Please visit the product pages on our website for the most up-to-date product information PD SERIES PART NUMBERING SYSTEM P D SERIES PD 3 PINS/ CONTACTS GENDER F - Female M - Male Note: New solder cup option shown. GENDER FEMALE RA - Right-angle, Bottom Exit RL - Right-angle, Left exit RR - Right-angle, Right Exit RU - Right-angle, Top Exit RML - Right-angle, Bottom Exit, Long Screw Mach. Term. RMS - Right-angle, Bottom Exit, Short Screw Mach. Term. S - Straight, Rear Exit SC - Solder Cup HOUSING MALE RML - Right-angle, Bottom Exit, Long Screw Mach. Term. RMS - Right-angle, Bottom Exit, Short Screw Mach. Term. S - Straight, Rear Exit SC - Solder Cup TERMINALS 1 - Front Mount .11" (2.8 mm) diameter flange mounting holes 2 - Rear Mount .091" (2.3 mm) diameter flange mounting holes 3 - Front Mount .126" (3.2 mm) diameter flange mounting holes Blank= Silver terminals AU= Gold terminals Bifurcated PCB Terminals Bifurcated PCB Terminals PD3MS1 3-pin male, straight (rear exit) PC terminals. Front mount. PD3MRML2 3-pin male, right angle (bottom exit) long screw machine terminals. Panel mount holes not countersunk. PD3FRA1 3-contact female, right-angle (bottom exit) PC/solder terminals. Ground lug. Front panel mount. PD3FRL1 3-contact female, right-angle (left exit) PC/solder terminals. Ground lug. Front panel mount. RECOMMENDED PC BOARD LAYOUT (Component Side) RECOMMENDED PC BOARD LAYOUT (Component Side) Numbers PD3FRA1, 2, and 3; PD3FRL1, 2, and 3; PD3FRR1, 2 and 3; PD3FRU1, 2 and 3 (Typical) DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Numbers PD3FS1, 2, and 3 (Typical) Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery CONNECTORS & RECEPTACLES PD SERIES FAX: 773 792-2129 21 * Please visit the product pages on our website for the most up-to-date product information RECOMMENDED PC BOARD LAYOUT (Component Side) RECOMMENDED PC BOARD LAYOUT (Component Side) Numbers PD3FRMS1, 2, and 3 (Typical) Numbers PD3FRML1, 2, and 3 (Typical) RECOMMENDED PC BOARD LAYOUT (Component Side) RECOMMENDED PC BOARD LAYOUT (Component Side) Numbers PD3MRML1, 2, and 3 (Typical) Numbers PD3MRMS1, 2, and 3 (Typical) RECOMMENDED PC BOARD LAYOUT (Component Side) Numbers PD3MS1, 2, and 3 (Typical) DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 CONNECTORS & RECEPTACLES PD SERIES (continued) 22 CONNECTORS & RECEPTACLES Q-G(R) RECEPTACLES PHONE: 773 792-2700 CONNECTORS & RECEPTACLES * Please visit the product pages on our website for the most up-to-date product information Q-G (R) RECEPTACLES SERIES Y(*)F, Y(3)FPC, Y(*)FD, Y(3)FDPC AND Y(3)MPC RECEPTACLES Y3MPC Y3FPC Series Y(*)MPC. Male receptacle for panel or chassis mounting escutcheon. PC terminals and standoffs. Rear of panel mount in .750 inch diameter hole. Maximum panel thickness: 25 inches (6.35 mm); .156 inches (3.96 mm) if YEM escutcheon is used. Series Y(*)FPC. Female receptacle for panel or chassis mounting. PC Terminal and standoffs. Rear of panel mount in .875 inch (22.22 mm) diameter hole. Series Y(*)F. Female receptacle for panel or chassis mounting. Rear of panel mount in .875 inch (22.22 mm) diameter hole. Series Y(*)FD, Y(*)FDPC. Female receptacles. Same as Y(*)F and Y(*)FPC, respectively, except with FAS-DISCONNECT detent. Series YEF Escutcheons. Trim escutcheons provide distinctive panel appearance and can also color code connections. Available in black (standard), red, green, white, and yellow. Other colors possible on special order where production quantities warrant. RECEPTACLES Part Numbers Female Female Latchlock Detent Y3F Y3FD Insert Contacts 3 Part Number Male Y3MPC Insert Pins 3 Suffix letters "PC" indicate PC terminals; all others have solder lugs. ESCUTCHEONS Part Number YEF01 YEF02 YEF03 Color Red Black Green Part Number YEF04 YEF05 YEF08 Color Blue White Yellow SPECIFYING NOTE: YEM02 escutcheon can be ordered on special order; contact Switchcraft. ASSEMBLY/MOUNTING AII receptacles are rear-of-panel mount (units with PC terminals also mount/terminate to PC board). Flange fastens to chassis/panel with two #4-40 machine screws (not supplied). Use of escutcheons is optional. Install latch release lever (Series Y(*)F and Y(*)FPC) after receptacle is fastened to chassis/panel. Insert lever in slot from front and press inward until it locks (snaps) into place. To remove lever, depress rear of lever (with screwdriver) through opening at top rear of housing and pull lever straight out. YEF02 ESCUTCHEONS DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery CONNECTORS & RECEPTACLES F SERIES RECEPTACLES FAX: 773 792-2129 23 * Please visit the product pages on our website for the most up-to-date product information CONNECTORS & RECEPTACLES F SERIES RECEPTACLES F3MSTF F3FRAF F3FSTF Switchcraft now offers the F Series. Available in male and female, the receptacles can be mounted from the rear of the panel. Features include an all metal housing with a ferrite disk for added EMI/RMI shielding. Both male and female connectors can be mounted vertical or horizontal to the PC board. All connectors have a PC-board retention feature to hold the connectors firmly to the PC board prior to soldering. See the chart below for part numbers. SPECIFICATIONS: ELECTRICAL F SERIES FEATURES MECHANICAL * Replaces Cannon XLM-Series * 3-pin contact; male and female types * Both male and female fit in same panel cutout * Locking receptacles * Silver-plated contacts * Rugged metal shells; satin nickel finishes * Through-the-shell ground connection and all-metal shells for greater shielding effectiveness * Compatible with Switchcraft Q-G(R), QGP and other connectors with similar configurations * Added EMI/RFI ferrite shield Insertion/Withdrawal Forces: 7 pounds maximum/nominal Insertion: 7 pounds maximum withdrawal. Life: 10,000 operations (minimum). Part Number F3MSTF Terminals Contacts Housing F3MRAF MATERIAL F TERMINALS Satin Nickel M Right Angle F3FRAF Thermal Range: -55 C to +85 C Thermal Shock: Meets MIL-STD-202F, method 107D Salt Spray: Meets MIL-STD-202F, method 101D (for 16 hrs.) M Straight Silver ENVIRONMENTAL Shells: Die-cast; satin-nickel plated Inserts: Glass-filled thermoplastic. Socket Contacts: Copper alloy, silver-plated. Pin Contacts: Copper alloy, silver-plated. Latch Release: Steel, nickel-plated. Type F3FSTF Contact Resistance: 50 milliohms maximum, per pole. Current Rating: 15A Insulation Resistance: 1,000 M Dielectric Resistance: 1,000 V rms Capacitance: 2 to 4 pF F Two terminations are available on F-Series receptacles: 1. Straight PC-terminals - direct termination to PC-board. Housing mounts to panel. 2. Right Angle PC terminals - direct termination to PC-board at right angle. Housing mounts to panel. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 24 CONNECTORS & RECEPTACLES F SERIES RECEPTACLES PHONE: 773 792-2700 CONNECTORS & RECEPTACLES * Please visit the product pages on our website for the most up-to-date product information F SERIES RECEPTACLES (continued) F3MSTF F3FSTF F3MRAF F3FRAF DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery CONNECTORS & RECEPTACLES Q-G(R) ADAPTERS, ACCESSORIES FAX: 773 792-2129 25 * Please visit the product pages on our website for the most up-to-date product information Q-G(R) CONNECTOR INSERTS Male and female Q-G (R) inserts with 3-7 pins/contacts, fit appropriate plug and receptacle housings. Female inserts available with standard latchlock or FAS-DISCONNECT detent mating, and with solder or PC terminals. Intended for replacement, or building into equipment such as microphones and transducers. Standard Latchlock -- QG3F QG4F QG5F QG6F QG7F FAS-* DISCONNECT QG3FDPC QG3FD QG4FD QG5FD QG6FD QG7FD Male Inserts -- QG3M QG4M QG5M QG6M QG7M Insert Pins/ Contacts 3 3 4 5 6 7 *Suffix letters "PC" indicate PC terminals; all others (except "S") have solder lugs. **Suffix letter "S" indicates locking PC terminal and plastic housing. Special order only. Contact Switchcraft. Note: Add suffix "BAU" for black insert with gold-plated contacts. W(*)M RECEPTACLE Part Number W3M W4M Insert Pins 3 4 SHORTING PLUG Part Number N3MS Right-angle male panel receptacle. Mounts with two, #5-40 machine screws. 3-pin plug shorts out unused hi-Z microphone inputs or other sensitive circuits (shorting jumper installed between pins 2 and 3). 6" (152.4 mm) chain fastened to end pin to prevent plug loss. Switchcraft can install special wiring for a nominal extra charge. Insert Pins 3 Available on special order only; contact Switchcraft for price and delivery. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 CONNECTORS & RECEPTACLES Q-G(R) ADAPTERS, ACCESSORIES 26 CONNECTORS & RECEPTACLES Q-G(R) WALL PLATE RECEPTACLES PHONE: 773 792-2700 CONNECTORS & RECEPTACLES * Please visit the product pages on our website for the most up-to-date product information Q-G(R) WALL PLATE RECEPTACLES G(*)M WALL PLATE RECEPTACLE J(*)F WALL PLATE RECEPTACLE Wall plate with one, D3F or D4F female receptacle. Mounts on standard single electrical outlet box. Cover mounting screws included. Wall plate with one B3M or B4M male receptacle mounted (in "D"-shaped hole to prevent turning) on standard single electrical outlet box. Cover mounting screws included. Part Number G3MS G4MS Finish Insert Pins Stainless Steel 3 Part Number J3FS 4 J4MS Special order only. Contact Switchcraft. H(*)M WALL PLATE RECEPTACLE H4MS Finish Stainless Steel Stainless Steel Insert Pins 3 4 Special order only. Contact Switchcraft. K(*)F WALL PLATE RECEPTACLE Wall plate with two, D3F or D4F female receptacles. Mounts on standard single electrical outlet box. Cover mounting screws included. Wall plate with two, B3M or B4M male receptacles mounted (in "D"-shaped holes to prevent turning) on standard single electrical outlet box. Cover mounting screws included. Part Number H3MS Finish Insert Pins Part Number K3FS 3 4 K4FS Special order only. Contact Switchcraft. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Finish Stainless Steel Insert Pins 3 4 Special order only. Contact Switchcraft. Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery CONNECTORS & RECEPTACLES Q-G(R) CONNECTOR-ADAPTERS FAX: 773 792-2129 27 * Please visit the product pages on our website for the most up-to-date product information 321 322 323 Switchcraft Q-G (R) Connector-Adapters, designed to solve common interconnection problems, are ideally suited to the interconnection of microphones, mixers, amplifiers, public address and sound reinforcement equipment, broadcast equipment, and any other component that does not have an appropriate mating connector. All are completely shielded, and incorporate the high quality and outstanding design features of the Switchcraft line of Q-G Audio Connectors, including: 1. Separate ground terminal. 2. Ground Contactors. 3. Captive Design(R) Insert Screw 4. High impact Thermoplastic Insulation. MATERIAL SPECIFICATIONS PHONE JACK AND PLUG TERMINATIONS Shell: Copper alloy, nickel-plated. Insulation: Paper-base phenolic. Plug Tip and Sleeve: Copper alloy, nickel-plated. Phone Pin and Plug Housing: Copper alloy, nickel-plated. Phono Plug Insulation: Rigid plastic. Phono Jack Housing: Steel, copper alloy-plated, tarnish-resistant. 324 383A 384A Phono Jack Pin Receptacle: Brass, silver-plated, copper alloy. Phono Jack Insulation: Thermoplastic. 321. Phono plug to 3-contact female audio-connector (Switchcraft(R) A3F). 322. Phono jack to 3-contact female audio-connector (Switchcraft(R) A3F). 323. Phono plug to 3-pin male audio-connector (Switchcraft A3M). 324. Phono jack to 3-pin male audio-connector (Switchcraft(R) A3M). 383A. Three-contact female audio-connector (Switchcraft(R) A3F) to standard .250" (6.35 mm) diameter 3-conductor extension phone jack. 384A. Three-pin male audio connector (Switchcraft(R) A3M) to standard .250" (6.35 mm) diameter 3-conductor extension phone jack. 321 324 322 383A 323 384A DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 CONNECTORS & RECEPTACLES Q-G(R) CONNECTOR-ADAPTERS 28 CONNECTORS & RECEPTACLES QG(R) AUDIO CONNECTOR ADAPTERS PHONE: 773 792-2700 CONNECTORS & RECEPTACLES * Please visit the product pages on our website for the most up-to-date product information Q-G(R) AUDIO CONNECTOR-ADAPTERS 386A: Three-contact female audio connector (Switchcraft(R) A3F) to standard .250" (6.35 mm) diameter 3-conductor phone plug. 387A: Three-pin male audio connector (Switchcraft(R) A3M) to standard .250" (6.35 mm) diameter 3-conductor phone plug. 389: Three-contact female audio connector (Switchcraft(R) A3F) at both ends. Pre-wired contacts: 1 to 1, 2 to 2, 3 to 3. 390: Three-pin male audio connector (Switchcraft(R) A3M) at both ends. Prewired pins: 1 to 1, 2 to 2, 3 to 3. 386A 387A 389 390 S*FM AUDIO CONNECTOR-ADAPTER AUDIO "Y" ADAPTERS A C Male-female connector conversion has male Q-G(R) insert at one end and corresponding female Q-G(R) insert at the other. Designed to accept internally connected transformer, attenuator, or other circuitry inline with microphone input. Includes 1.50" (38.1 mm) long x .594" (15.08 mm) diameter of usable internal volume. B Series 391Q Y-Adapters can combine or split typical audio signals using a combination of Switchcraft Q-G(R) A3F and A3M cord plugs. Outputs of two microphones can conveniently be connected in parallel and connected to a single input using a 391Q23 Y-Adapter. Cabling is 2-conductor shielded, 2-foot long gray jacket with molded Y-junction at center point. Mates with Switchcraft Q-G(R) and QGP(R) connectors. Q-G(R) Cord Plug Part Numbers Part Number S3FM S4FM S5FM Female Insert QG3F QG4F QG5F Male Insert QG3M QG4M QG5M Insert Pins/Contacts 3 4 5 Available on special order only; contact Switchcraft for price and delivery. Part Number Plug A Plug B Plug C 391Q13 391Q23 391Q33 391Q43 391Q53 391Q63 A3F A3F A3F A3M A3M A3M A3M A3M A3F A3F A3F A3M A3M A3F A3F A3F A3M A3M Note: "Y" adapters may use either series A(*) or AA(*) plugs. Available on special order only; contact Switchcraft for price and delivery. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery CONNECTORS & RECEPTACLES DMX ADAPTER FAX: 773 792-2129 29 * Please visit the product pages on our website for the most up-to-date product information Switchcraft introduces our new series of DMX adapters. The DMX adapters were developed for use in the theater lighting industry. The adapters allow the end user to use standard 3 pin XLR cable assemblies in connecting DMX equipment.The adapters are available in 3 pin male to 5 pin female and 5 pin male to 3 pin female. All are wired "straight through." S3F5M FEATURES AND BENEFITS * Nickel-plated die-cast housing increases durability * Pre-wired for immediate use * Available in two configurations APPLICATIONS * Theater lighting * Any DMX application S5F3M SPECIFICATIONS Shell: Die-cast zinc, satin nickel finish Insert Insulation: Molded thermoplastic Socket contacts: Silver-plated copper alloy, tarnish-resistant Pin contacts: Sliver-plated copper alloy, tarnish-resistant ORDERING INFORMATION S3F5M S5F3M 3 pin female to 5 pin male 5 pin female to 3 pin male DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 CONNECTORS & RECEPTACLES DMX ADAPTER 30 CONNECTORS & RECEPTACLES Q-G(R) CONNECTOR-ADAPTER RECEPTACLES PHONE: 773 792-2700 CONNECTORS & RECEPTACLES * Please visit the product pages on our website for the most up-to-date product information Q-G(R) CONNECTOR-ADAPTER RECEPTACLES Adapter receptacles mount directly to microphones or similar equipment to provide highly reliable 3-, 4- and 5-pin Switchcraft Q-G(R) connections. Adapter shell and coupling nut are brass, satin nickel finish. SERIES M(*)M Male with shell having 13/16-27 external threads to engage equipment with internally threaded body. Terminals extend out rear (threaded end) to permit wiring without disassembly. SERIES L(*)MN Male has plain cylindrical shell with knurled, internally threaded collar to engage external 13/16-27 threads on microphone body. Part Numbers Series L(*)MN L3MN L4MN L5MN Series M(*)M M3M M4M M5M Insert Pins 3 4 5 Z MATCHING TRANSFORMERS SPECIFYING FEATURES * Plug-in impedance changes * Fully wired * Connections bi-directional (low to high impedance or high to low impedance) * Rugged die-cast housings * Mu-metal shielding 9144 MATERIAL SPECIFICATIONS Shell: Die-cast zinc shell, nickel-plated with black non-glare metalized foil label. Shielding: Mu-metal. Dimensions: Diameter-.75" (19.05 mm) nominal Length - 3" (76.2 mm) nominal (Part Number 92XX); 3.375" (85.73 mm) nominal (Part Number 91XX). 9244 ELECTRICAL SPECIFICATIONS Frequency Response: Flat-20 Hz to 20 kHz 2 decibels Impedance: High-50 K ohms (nominal); Low-150 ohms (nominal) Voltage Step Ratio (Input Power Level); Low to High: +29 decibels (typical); high to low: -29 decibels (typical) Series 9000 Line Matching Transformers offer low-loss interconnections between high and low impedance equipment. Exclusive mu-metal shielding protects against spurious electrostatic and RF fields. Units are bi-directional and can be used as follows: * Low to hi, such as professional low impedance microphones to high impedance amplifiers. Stereos, cassette recorders, public address systems, and mixers. * Hi to low, such as high impedance microphones or electronic instruments to low impedance amplifiers or mixers. Designed to mate with Switchcraft Q-G(R) connectors. Available with various terminations; see chart. Part Number 9115 9129 9144 9244 Switchcraft Connector Lo Z: 3-contact Q-G(R) Hi Z: 2-conductor phone plug, female, A3F 1/4" finger diameter, right angle handle, 4" extension (shielded) cable Lo Z: 3-contact Q-G(R) Hi Z: 2-conductor phono plug, right female, A3F angle handle, 4 inch extension (shielded) cable Lo Z: 3-contact Q-G(R) female, A3F Hi Z: 2-conductor phone plug, 14" finger diameter Lo Z: 3-pin Q-G(R) male, A3M Available on special order only; contact Switchcraft for price and delivery. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery CONNECTORS & RECEPTACLES TINI Q-G(R) MINIATURE CONNECTORS FAX: 773 792-2129 31 * Please visit the product pages on our website for the most up-to-date product information Series TA(*)F, TA(*)FB, TA(*)FL and TA(*)FLB - Straight female cord plug Series TA(*)M, TA(*)MB, TA(*)ML and TA(*)MLB - Straight male cord plug Series TB(*)M and TB(*)MB - Chassis/panel mount male receptacle Series TY(*)F and TY(*)FPC - Chassis/panel, female receptacle, choice of solder lugs or P.C. terminations. Series TLP - Looping Plugs Series TBA(* *) - Audio Adapters Series TRA(*)M - PC Mount Male Receptacles Series TRG(*) - Reverse Gender Panel Mount, Cord Mount DESIGN FEATURES STYLE - Streamlined, miniaturized with nickel-plated metal and contrasting black plastic parts. Designed for light weight and unobtrusiveness. Also available in conductive black chrome finish. CONSTRUCTION - Metal parts are rugged die-cast or precision machined with nickel-plating; plastic parts are molded of high dimensional-stability thermoplastic. Advanced design assures minimum weight consistent with strength and durability of cord plug housings of .413" (10.5 mm) diameter Weight: Series TA(*)F plug = .25 ounce (7 g); Series TA(*)M = .3 ounce (8.5 g). INSERTS - Precision molded of thermoplastic for high mechanical and dielectric strength. Contacts and terminals are precision formed and plated for intimate contact and low resistance connections. Terminal numbers are molded on rear of male insert and on face of female insert for easy identification (except 6-pin male insert). Inserts can be supplied for OEM installation in microphones and instrumentation for optimum connecting reliability. For cord plugs, inserts can also be supplied for replacements. LATCHLOCK - Positive latch system assures high integrity, vibration-resistant mating and transfer of shielding connection between housing, combined with simple, easy fingertip release. STRAIN RELIEF - Rugged internal clamp holds cable tightly, while making a secure, low resistance connection between cable shield and housing. TA3F FLEX RELIEF - Protects by minimizing cable bending stress at point of cable entry. Maximum recommended cable diameter is .115" (2.92 mm) when flex relief is used. By omitting flex relief (Series T(*)FL and T(*)ML only), cable up to .170" (4.32 mm) diameter can be used. ASSEMBLY - Connector parts are mechanically keyed for simple assembly. POLARIZATION - Mating male and female connectors are also mechanically keyed (latch and groove) so that it is impossible to mate them incorrectly. "SCOOP-PROOF" FEATURE - Fully recessed pins on male plugs and receptacles cannot be "scooped", bent or damaged by accidental mismating with mating connector. COLOR ESCUTCHEONS - Attractive color escutcheons, Series TYEF, are recommended for use with Series TY(*)F and TY(*)FPC receptacles (when rear mounted) for attractive panel trim, as well as color coding one or more connectors. Colors are: red, black, gray, green, blue, white and yellow. CUSTOM Tini Q-G(R) CABLE ASSEMBLIES - On special order where production quantities warrant, Switchcraft can supply assembled and tested Tini Q-G(R) cables. MOUNTING Panel/Chassis Thickness: Series TB(*)M: .25" (6.35 mm) maximum Series TY(*)F: Front--.375" (9.5 mm) maximum Rear--.093" (2.3 mm) maximum Series TY(*)FPC: Front--.312" (7.9 mm) maximum Rear--.093" (2.3 mm) maximum TINI Q-G (R) AUDIO ADAPTERS Series TA Tini Q-G (R) audio adapters have been designed to adapt Tini Q-G (R) connections to standard audio connectors. Tini Q-G (R) adapters convert to Switchcraft Q-G (R) and QGP connectors and similar full-size connectors. Part Number TA01 TA02 TA03 TA04 TA05 TA06 Tini Q-G (R) End Mates With TA3F TA4F TA5F TA3F TA4F TA5F TA3M Q-G (R) End Mates With A3M A4M A5M A3F A4F A5F DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 CONNECTORS & RECEPTACLES TINI Q-G(R) MINIATURE CONNECTORS 32 CONNECTORS & RECEPTACLES TINI Q-G (R) MINIATURE CONNECTORS PHONE: 773 792-2700 CONNECTORS & RECEPTACLES * Please visit the product pages on our website for the most up-to-date product information TINI Q-G(R) MINIATURE CONNECTORS (continued) SPECIFICATIONS: (3 - 5 CORD MOUNT ONLY) ELECTRICAL Latch (Female): Copper alloy, nickel-plated. Mounting Nut: Copper alloy, nickel-plated. Contact Resistance: .010 ohms maximum after life (and after salt spray). Current Rating (Carry Only): 5 A, 125 V AC (4 A, 125 V AC on 5 circuit) based on 30C maximum. Insulation Resistance: 510,000 megohms minimum @ 500 V DC (initial); 10,000 megohms minimum (after humidity test). Dielectric Strength: 1,000 V (rms). SPECIFICATIONS: (6 - 8 Cord Mount and all Receptacles and Adapters) MECHANICAL Life: 5,000 operations minimum Insertion/Withdrawal Forces (after life): 6.1 lb./2.77 kg after life, insertion; 5.6 lb/2.54 kg, withdrawal. Solderability Standard: Meets EIA RS-186-9E. Mechanical Shock: Meets MIL-STD-202, method 213B. Vibration: Meets MIL-STD-202, method 201A. Wire Size: #22 wire gauge solid; #24 wire gauge stranded. ENVIRONMENTAL Thermal Range: -55C to + 85C. Humidity: Meets MIL-STD-202, method 106D. Thermal Shock: Meets MIL-STD-202, method 107D. Salt Spray: Meets MlL-STD-202, method 101. MATERIAL Housing, Plugs and Male Receptacles: Copper alloy, nickel-plated. Female Receptacle-Die-cast zinc, nickel-plated. Black Tini Q-G(R) Housing: Copper alloy, black chrome-plated. Pin and Socket Contacts: Copper alloy, silver-plated. Flex Relief: Molded black thermoplastic elastomer. Latch Button: Molded black thermoplastic. Release Lever and Mounting Washer: Steel, nickel-plated. Standoff/Ground Terminal and Cable Clamp: Steel, electrotinned. Inserts and Insulating Spacer: Molded, high strength thermoplastic. STRAIGHT FEMALE CORD PLUG Part Insert Number Contacts TA3F 3 TA3FB* 3 TA3FL1 3 TA3FLB* 3 TA4F 4 TA4FB* 4 TA4FL1 4 Part Number TA4FLB* TA5F TA5FL1 TA5FLB* TA6FL1 TA7FL TA8FL ELECTRICAL Contact Resistance: .010 ohm maximum after life. Current Rating (Carry only): 1.5A, 125 VAC, based on 30 maximum Insulation Resistance: 510,000 M minimum @ 500 VDC (initial). Dielectric Strength: 250 V rms. MECHANICAL Life: 2,000 operations Insertion/Withdrawal Forces (after life): -13 pound insertion; -13 pound maximum withdrawal Solderability Standard: Meets EIA RS-186-9E. Wire Size: 28 wire gauge stranded. MATERIAL Housings, Plugs and Male Receptacles: Copper alloy, nickel-plated. Socket Contacts: Copper alloy, silver-plated. Pin Contacts: Copper alloy, electrotinned. Flex Relief and Latch Button: Molded thermoplastic. Ground Terminal: Copper alloy, electrotinned. Inserts and Insulating Spacer: Molded high strength thermoplastic, UL 94 V-0. Latch (Female): Copper alloy, nickel-plated. Mounting Nut: Copper alloy, nickel-plated. Ferrite: 43 material, shielded head. Frame: Molded thermoplastic, UL 94 V-0. STRAIGHT MALE CORD PLUG Insert Contacts2 Part Number 4 5 5 5 6 7 8 TA3M TA3MB* TA3ML TA4M TA4MB* TA4ML1 Insert Pins 3 3 3 4 4 4 Part Number TA5M TA5ML TA5MLB* TA6ML1 TA7ML TA8ML Insert Pins 5 5 5 6 7 7 1. Add AU to Part Number for Gold Contacts. * B indicates black housing 1 Flex relief omitted for larger diameter cable 2. Add AU to Part Number for Gold Contacts. * B indicates black housing Available on special order only; contact Switchcraft for price and delivery. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery CONNECTORS & RECEPTACLES TINI Q-G (R) MINIATURE CONNECTORS FAX: 773 792-2129 33 * Please visit the product pages on our website for the most up-to-date product information TB(*)M AND TB(*)MB RECEPTACLE TLP(*) LOOPING PLUG Looping plug is designed for circuit testing. Other inserts and wiring patterns are possible; contact Switchcraft. Male receptacle for chassis/panel mounting. Specially designed flange permits close (front) mount on crowded panels. Mounting hardware supplied. Available with PC terminals. Call factory for details. Part Insert Part Insert Number Pins Number Pins TB3M 3 TB5MB* 5 TB3MB* 3 TB6M 6 TB4M 4 TB7M 7 TB4MB* 4 TB8M 8 TB5M 5 * B indicates black housing STRAIGHT FEMALE LOOPING PLUG Part Number Insert Contacts TLP4 4 TLP6 6 Available on special order only; contact Switchcraft for price and delivery. * Number of insert contacts or pins must be specified to complete Part Number. REVERSE GENDER TQG SERIES TRG4M Same specifications as the original TQG Series, however, the latch is on the male cord mount. Available in 4 pin only. TRGS4F Part Number TRGS4F TRG4M Insert Pins 4 4 Description Panel mount female Cord mount male w/latch DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 CONNECTORS & RECEPTACLES TINI Q-G(R) MINIATURE CONNECTORS (continued) 34 CONNECTORS & RECEPTACLES TINI Q-G(R) MINIATURE CONNECTORS PHONE: 773 792-2700 CONNECTORS & RECEPTACLES * Please visit the product pages on our website for the most up-to-date product information TINI Q-G(R) MINIATURE CONNECTORS (continued) TRA6M TRA3M TRA(*)M PC MOUNT MALE RECEPTACLE The TRA(*)M low profile male receptacles mount in minimum space from the rear of panel or chassis, and feature space-saving right-angle construction and PC type terminals. The TRA3M is a cost-effective choice for audio equipment, medical instrumentation, computer equipment and test/measurement applications. Also available with 6 pins. Part Number TRA3M TRA6M TRA6MF* Insert Pins 3 6 6 *F designates ferrite shielding. TRAPC3MS TRASM3M TRASM*M, TRAPC*M SERIES Switchcraft introduces an expansion of its popular TQG Series of connectors.The TRASM*M and TRAPC*M offers low profile, right angle PC board mount connectors. The TRASM*M versions are true surface mount connectors, while the TRAPC*M versions are through-hole PC mount connectors. Both versions are available in 3-8 pins. All plastic connectors, the TRASM*M and TRAPC*M series have flats on the top of the connectors to facilitate pick and place assembly. As an added option, a non-threaded bushing version is also available. * Low profile, compact design reduces PC board space * Mates with TQG female cord plugs * Rated at 5A for 3-6 pins, 3A for 7 and 8 pin versions MARKETS * Wireless microphone systems * Medical Instrumentation * Test Instrumentation ELECTRICAL Current Rating: 5A for 3-5 pins, 1.5A for 6-8 Contact Resistance: 10 m Ohm max Insulation Resistance: 100 m Ohm min Dielectric Withstanding Voltage: 250VAC Mechanical Life: 2,000 cycles FEATURES AND BENEFITS TINI Q-G(R) CONNECTORS ORDERING INFORMATION T ___ RA ___ ___ ___ M ___ ___ ___ ___ ___ SPECIFICATIONS MATERIALS Reel Size 15" reel, standard tape and reel size Tini QG Right Angle Termination PC - Thru Hole SM - Surface Mount Housing: Thermoplastic Contacts: Brass, tin-plated Nut and Washer: Brass, nickel-plated Contacts Configuration 3-8 Contact Gender M - Male Optional Packaging TR - Tape and Reel (std packaging - bulk) Optional Modifier 1 - no thread Optional Modifier S-small Profile (available in configurations 3&4 only) See next pages for drawings DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery CONNECTORS & RECEPTACLES (R) TWIN Q-G (R) MINIATURE CONNECTORS FAX: 773 792-2129 35 * Please visit the product pages on our website for the most up-to-date product information TRASM*M, TRAPC*M SERIES DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 CONNECTORS & RECEPTACLES TINI Q-G (R) MINIATURE CONNECTORS (continued) 36 CONNECTORS & RECEPTACLES TINI Q-G(R) MINIATURE CONNECTORS PHONE: 773 792-2700 CONNECTORS & RECEPTACLES * Please visit the product pages on our website for the most up-to-date product information TINI Q-G (R) MINIATURE CONNECTORS (continued) TRASM*M, TRAPC*M SERIES DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery CONNECTORS & RECEPTACLES TINI Q-G(R) MINIATURE CONNECTORS FAX: 773 792-2129 37 * Please visit the product pages on our website for the most up-to-date product information TY(*)F AND TY(*)FPC RECEPTACLES MOUNTING HOLE DETAIL SERIES TY(*)F, TY(*)FPC FRONT MOUNTING REAR MOUNTING Female receptacle mounts in minimum space from front or rear panel or chassis. Terminals are solder lugs, Series TY(*)F, or P.C., Series TY(*)FPC. All receptacles have separate ground lug. Part Number TY3F TY3FPC TY4F TY4FPC Insert Contacts 3 3 4 4 Part Number TY5F TY5FPC COMBINED P.C. /PANEL MOUNTING RECOMMENDED P.C. BOARD LAYOUT Insert Contacts 5 5 TQG(*)F AND TQG(*)M CONNECTOR INSERTS TYEF ESCUTCHEONS TBA(**) AUDIO ADAPTER Male and female inserts with 3, 4, 5 or 6 pins/ contacts. For replacement (cord plugs only) or build-into equipment, such as microphones, transducers and instruments. Trim escutcheons in seven colors for use with Series TY(*)F and TY(*)FPC receptacles, are recommended for rear mount receptacles. Escutcheons must be ordered separately. Part Number TYEF01 TYEF02 TYEF03 TYEF04 TYEF05 TYEF08 TYEF11 Color Red Black Green Blue White Yellow Gray Male Inserts Part Number TQG3M TQG4M TQG5M TQG6M 3-6 pin male-to-male adapter is designed for through-bulkhead or cable expansion usage. Adapter is prewired pin 1 to pin 1, pin 2 to pin 2, etc. Mounting nuts are supplied for each threaded end. Panel hole diameter required is .45"; maximum panel thickness is .25" (6.35 mm). Insert Pins 3 4 5 6 Female Inserts Part Number TQG3F TQG4F TQG5F TQG6F Insert Contacts 3 4 5 6 Part Number TBA03 TBA04 TBA05 TBA06 Available on special order only; contact Switchcraft for price and delivery. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 Insert Pins 3 4 5 6 CONNECTORS & RECEPTACLES TINI Q-G (R) MINIATURE CONNECTORS (continued) 38 CONNECTORS & RECEPTACLES HIGH POWER CONNECTORS PHONE: 773 792-2700 CONNECTORS & RECEPTACLES * Please visit the product pages on our website for the most up-to-date product information HPC SERIES PANEL MOUNTS AND CORD PLUGS HPCPR41F HPCP41F HPCP410RA HPC SERIES Switchcraft recently introduced a complete line of panel mount speaker connectors that are completely compatible with the Neutrik(R) Speakon(R) 4 pole series. We are now introducing a complete line of cable mounts as well. The complete HPC Series offers both panel mount and cord mount connectors. The HPC panel mounts have been updated with new silver-plated contact materials that boost the contact ratings to 30A per UL 1977 on PC mount versions, 50A per UL 1977 on Faston(R) versions. They are still available with either 0.100" depth flanges or 0.200" depth flanges. The 0.200" depth flange allows for rear mounting of the HPC Series, and proper mating of all cord plugs. The panel mount versions are available with either 0.187" or 0.250" Faston(R) terminals, and either straight or right angle PC mount terminals. The right angle PC mount version also has, as an option, a mounting post which allows the connector to snap onto the PC board for wave soldering. The HPC cord plugs are available in either straight, right angle, or as an in-line. The in-line version mates with either the straight or right angle cord plug, allowing the end user to extend cable runs. All cord plugs are compatible with Speakon(R) panel mounts. The in-line mates with our HPC cord plugs, as well as Speakon(R) cord plugs. The unique feature of the HPC series cord plugs are the "push to lock" feature, similar to the connection of an XLR connector. The HPC cord plugs, when mated to either HPC panel mounts or Speakon(R) panel mounts do not require a 1/4" turn to engage. Simply push the connector in until it locks. To disengage, push forward on the latch lever and pull the connector out. This feature eliminates the need to remember to turn the connector to make contact. All HPC cord plugs utilize 0.250" Faston(R) terminals, which allow for easy assembly, and make it easy to change cord plugs. To change from a straight cord plug to an in-line cord plug, back off the strain relief nut, twist off the handle, disconnect the Faston(R) terminals, fasten the new cord connector, twist on the handle and the strain relief. Barbs on the handle keep the handle from vibrating loose from the front shell. Both HPC panel mounts and cord plugs incorporate a built-in gasket, which allows them to meet IP 25 harsh environment ratings, as well as IEC 529 and IEC 1010-1 safety ratings. FEATURES AND BENEFITS * Completely compatible with Neutrik(R) Speakon(R) 4 pole connectors * 30A rating per UL 1977 on PC mount versions * 50A rating per UL 1977 on Faston(R) versions * Panel mounts have two different Faston(R) terminal sizes, 0.187" and 0.250" * Panel mounts offered with two different flange depths, 0.100" and 0.200" * 0.200" depth flange offers easy rear mounting HPCI4F HPCC4RAF * Right angle or straight PC board terminals on panel mounts * Built in gasket gives all HPC connectors IP 25 environmental ratings * All HPC Series meet IEC 529 and IEC 1010-1 safety ratings * Cord plug versions offer "push to lock" design, no 1/4" turn to engage * Cord plug versions accept 10 AWG wire, 0.560" cable OD max APPLICATIONS * Loudspeakers * Power audio amplifiers SPECIFICATIONS Materials Housings: Thermoplastic UL 94V-O rated Seal Rings: Thermoplastic rubber Contacts: Silver-plated over copper alloy ELECTRICAL PC Terminals Current Rating: 30A per UL 1977 Faston(R) Terminals Current Rating: 50A RMS w/10AWG wire, normal ambient, per UL 1977 Voltage Rating: 1,500 AC RMS, Per Mil-Std 202 Method 301 Insulation Resistance: > 2T Ohms Contact Resistance: 1m Ohm, 1.5mOhm after 1,000 insertion/withdrawals MECHANICAL Shock: Mil-Std 202, Method 213B Cond.K Vibration: Mil-Std 202, Method 201A Life: 1,000 insertion/withdrawals Cable Range: 0.560" OD max ENVIRONMENTAL Salt Spray: Mil-Std 202, Method 101D Cond. B Thermal Shock: Mil-Std 202, Method 107G Temperature Limits: -55 C to +85 C Moisture Resistance: Mil-Std 202, Method 106E Life@Ambient Temperature: Mil-Std 202, Method 108A Touch Proof: IEC 65 and 1010-1 Weather Tightness: IEC 529, IP 25 CORD MOUNT ORDERING INFORMATION Part Number Description HPCC4F HPCI4F HPCC4RAF DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com HPCC4F Straight Cord Plug Inline Cord Plug Right Angle Cord Plug Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery CONNECTORS & RECEPTACLES HIGH POWER CONNECTORS FAX: 773 792-2129 39 * Please visit the product pages on our website for the most up-to-date product information Series High Power Connector Type of Connector P - Panel Type of Housing Blank - rectangle R - round Number of Contacts 4 Termination F - .250" Faston(R) ; F1 - .187" Faston(R); PC - Printed Circuit RA - Right angle PC; RAP - Right angle PC with mounting post Mounting Holes Blank - Rectangle: .140" dia. w/Countersink Hole Blank - Round: .152" dia. w/Countersink Hole 0 - Rec./ Round: .093" Dia. Hole Recessed Flange (Dim. "A") 1 - .100"; 2 - .200" DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 CONNECTORS & RECEPTACLES PANEL MOUNT ORDERING INFORMATION HPC P ___ ___ 4 ___ ___ ___ ___ ___ 40 CONNECTORS & RECEPTACLES HIGH POWER CONNECTORS PHONE: 773 792-2700 CONNECTORS & RECEPTACLES * Please visit the product pages on our website for the most up-to-date product information HPCP*4 DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery CONNECTORS & RECEPTACLES TM EN3 MINI WEATHERTIGHT CONNECTOR SERIES FAX: 773 792-2129 41 * Please visit the product pages on our website for the most up-to-date product information GENERAL FEATURES AND BENEFITS MATING INSTRUCTIONS FOR A CORD CONNECTOR TO A PANEL MOUNT OR IN-LINE CONNECTOR First, align the notched keyway on both the panel mount or in-line and cord connector. Then, push the cord connector onto the mating connector. Grasp the coupling ring between the slots, push it toward the panel mount connector and rotate it clockwise nearly one half a turn. Continue rotating until you feel the coupling ring ride over the locking "bump". This is the locked position. The cord connector is not securely in place unless this procedure is followed. APPLICATIONS Process Control Marine Electronics Medical Instrumentation Geothermal Instrumentation Communications Transportation General Industrial Electronics Harsh Environments Cord Connector Panel Connector ENVIRONMENTAL Temperature Limits: -40C to +65C (non-operating) Moisture Resistance: Mil-Std 202 Method 106F Insulation Resistance: Mil-Std 202 Method 302 condition B Thermal Shock: Mil-Std 202 Method 107G Salt Spray: Mil-Std 202 Method 101D condition B RATINGS IP16/IP18 CFR 46 Part 110.20 IP66/IP68 UL 94V-O NEMA 250 (6P) Patent 5,485,673 File 36049 EN3TM Weathertight Connector Current Carry Capability (per UL 498 Standard) 50.00 Temp Rise (Centigrade) * Great all-purpose connector "weather" or not sealing feature is required. * Superior leakage protection. Contact area is double-sealed for excellent moisture and chemical resistance when mated to Switchcraft's connectors. * Integral O-ring and gasket. O-ring is molded onto cord housing assembly and gasket is molded onto panel housing assembly to prevent leakage and eliminate need for additional O-rings and gaskets. * Reduced part count for reduced labor to assemble. * No Grommets. Cable clamp assembly features living hinges, which snap easily onto and support the cable. * Thermoplastic rubber body simulates closed entry contact system to prevent probe damage or accidental loss of spring retention due to misaligned or bent pins. * Abrasion-resistant thermoplastic boot provides strain relief and accepts cable diameter .195" to .265". * Housing rated UL 94V-O against flammability. * Panel connector shell features a positioning keyway to prevent misalignments and a polarizing single "D" design for proper panel mounting and to prevent rotational movement. * 2-18 pins. * Exceeds Coast Guard specifications for water tightness (CFR 46 Part 110.20). * Optional cap covers panel housing assembly when not in use. * Exceeds enclosure rating IP16/IP18 when not mated or covered and IP66/IP68 when mated or covered (IEC 529). * Exceeds enclosure rating 6P at 1000V when mated or covered (NEMA 250). 40.00 30.00 20.00 10.00 0.00 7 10 12 13 Current (Amps) - w/14 AWG Wire MATERIALS Cord and panel connector shells, contact locking disk, and cable clamp assembly: Thermoplastic polymer glass fiber, flame retardant Coupling ring: Nylon Rear boot and connector shell interior: Thermoplastic rubber Contacts: Copper base alloy gold-plated over nickel underplate Female 3 pin Female 8 pin Male 3 pin Male 8 pin Dielectric Withstanding Voltage Contact size/ number of contacts SPECIFICATIONS MECHANICAL #20-2 Shock: Mil-Std 202 Method 213B, condition K Vibration: Mil-Std 202 Method 201 Life: 600 insertion/withdrawal cycles (minimum) Voltage 3000 #20-4 #20-3 #16-2 ELECTRICAL 2000 Voltage Rating (sea level): Tested at 600 VRMS Insulation Resistance: 100 megohms (minimum) at 77 F Contact Resistance: 5 milliohms (maximum) Current Rating: 3.0 Amps (#26 contact)- 9 through 18pin 6.5 Amps (#20 contact)- 7 and 8 pin 7.5 Amps (#20 contact)- 2 through 6 pin 13.0 Amps (#16 contact)- 2 and 3 pin DIMENSIONS ARE FOR REFERENCE ONLY #20-7, #20-8 #16-3 #20-5, #20-6 Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 1000 15 CONNECTORS & RECEPTACLES EN3TM MINI WEATHERTIGHT CONNECTOR SERIES 42 CONNECTORS & RECEPTACLES EN3TM MINI WEATHERTIGHT CONNECTOR SERIES PHONE: 773 792-2700 CONNECTORS & RECEPTACLES * Please visit the product pages on our website for the most up-to-date product information CRIMP CONTACT INSERTION INSTRUCTIONS CRIMP TOOLS CRIMP CONTACT EXTRACTION INSTRUCTIONS Part Number Tool Description EN3INS16 Insertion/Extraction Tool for 16 AWG EN3INS20 Insertion/Extraction Tool for 20 AWG EN3CR Crimp Hand Tool EN3CRAUTO Pneumatic Crimp Tool EN3POS16 Positioner for 16 AWG contacts and pins EN3POS20 Positioner for 20 AWG contacts and pins NOTE: A positioner must be used with the EN3CR and EN3CRAUTO. Note: Solder and PC contacts are factory assembled CORD CONNECTOR ASSEMBLY INSTRUCTIONS STEP 1 Cord Connector: To assemble the three-part cord connector, first feed the end of the cable through the boot, cable clamp housing, and coupling ring in that order and position as shown in the figure below. NOTE: The coupling ring can also be inserted onto the cord connector from the front. In-line Connector: Feed the end of the cable through the boot and cable clamp housing in the order and position shown. CABLE COUPLING RING BOOT CABLE CLAMP HOUSING CABLE CORD CONNECTOR CONTACT PINS IN-LINE CONNECTOR CABLE CLAMP HOUSING BOOT CONTACT PINS O-RING (MOLDED ONTO CORD CONNECTOR) STEP 2 Next, strip the cable .218" as shown and begin soldering conductors to pins, or insert contacts crimped on wire starting with contact #1 next to the "notch" and following with the remaining conductors counter-clockwise with #6 or #8 conductor in the center. 3/8" MAX. 7/32" SOLDER NOTCH (PIN #1 INDICATOR) CORD CONNECTOR 3/8" MAX. IN-LINE CONNECTOR SOLDER 7/32" NOTCH (PIN #1 INDICATOR) 9/32" 9/32" STEP 3 Push the cable clamp housing forward until it locks into the connector body and snap the two clamps into their compartments. CORD CONNECTOR IN-LINE CONNECTOR CABLE CLAMPS CABLE CLAMPS STEP 4 CORD CONNECTOR IN-LINE CONNECTOR Finally, push the boot all the way forward to seat tightly onto the cable clamp housing. Remember: Cord connectors will not mate with each other. For cord-to-cord connection, your customer must order a cord connector plus an in-line connector. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery CONNECTORS & RECEPTACLES TM EN3 MINI WEATHERTIGHT CONNECTOR SERIES FAX: 773 792-2129 43 * Please visit the product pages on our website for the most up-to-date product information CONNECTORS & RECEPTACLES EN3TM MINI WEATHERTIGHT CONNECTOR SERIES (continued) 2 - 8 PIN CORD CONNECTOR 9 - 18 PIN CORD CONNECTOR EN3 Cord Connector Part Number Scheme Series Style EN3 Notes: C Pins/ Contacts 2-18 Gender F: Female M: Male Contact Size 16: #16 Leave blank for #20 26: for 9-18 only Contact Style C: Crimp P: PC S: Staggered Leave blank for solder 7 & 8 pin not available in cord male 9-18 pin available in either staggered solder or straight solder only 9-18 pin available only with # 26 terminals AG: Silver plating special order #16 contact available in 2 & 3 pins only DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 Contact Plating AG: Silver Leave blank for gold Packaging K: Kit Leave blank for bulk packaging 44 CONNECTORS & RECEPTACLES EN3TM MINI WEATHERTIGHT CONNECTOR SERIES PHONE: 773 792-2700 CONNECTORS & RECEPTACLES * Please visit the product pages on our website for the most up-to-date product information EN3TM MINI WEATHERTIGHT CONNECTOR SERIES (continued) 2 - 8 PIN PANEL CONNECTOR 9 - 18 PIN PANEL CONNECTOR EN3 Panel Connector Part Number Scheme Series Style EN3 Notes: P Pins/ Contacts 2-18 Gender F: Female M: Male Contact Size 16: #16 Leave blank for #20 26: for 9-18 only Contact Style C: Crimp P: PC S: Staggered Leave blank for solder Contact Plating AG: Silver Leave blank for gold Packaging K: Kit Leave blank for bulk packaging 7 & 8 pin not available in panel female 9-18 pin available in either staggered solder or straight solder only 9-18 pin available only with # 26 terminals AG: Silver plating special order #16 contact available in 2 & 3 pins only DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery CONNECTORS & RECEPTACLES TM EN3 MINI WEATHERTIGHT CONNECTOR SERIES FAX: 773 792-2129 45 * Please visit the product pages on our website for the most up-to-date product information CONNECTORS & RECEPTACLES EN3TM MINI WEATHERTIGHT CONNECTOR SERIES (continued) 2 - 8 PIN INLINE CONNECTOR EN3 Inline Connector Part Number Scheme Series Style EN3 Notes: I Pins/ Contacts 2-8 Gender F: Female M: Male Contact Size 16: #16 Leave blank for #20 Contact Style C: Crimp P: PC Leave blank for solder 7 & 8 pin not available in inline female #16 contact available in 2 & 3 pins only AG: Silver plating special order 2 - 8 PIN OVERMOLDED CORD AND INLINE CONNECTOR (See Cable Section for More Details.) DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 Contact Plating AG: Silver Leave blank for gold Packaging K: Kit Leave blank for bulk packaging 46 CONNECTORS & RECEPTACLES DIN CONNECTORS AND PLUGS PHONE: 773 792-2700 CONNECTORS & RECEPTACLES * Please visit the product pages on our website for the most up-to-date product information DIN CONNECTORS MATERIAL SPECIFICATIONS ELECTRICAL Contact Resistance: Cord Plugs and Receptacles; .010 ohms, contact spring/pin .030 ohms, ground clip/shell. Control and Switching Receptacles; .015 ohms, contact spring/pin; .020 ohms, switch contacts. Dielectric Withstanding Voltage: 500 V (rms) Contact Rating: 5-pin; 3A, 34 V DC Leakage Resistance: 105 M Recommended Wire Size: 22 wire gauge maximum Shell: Die-cast zinc alloy, nickel-plated. Receptacle Mounting Flange: Steel. Receptacle Body: Plastic. Insert Material: Plastic. Socket Contacts: Tin-plated. Pin Contacts: Tin-plated. Switching Contacts: Silver-plated. Cable Relief Bushing: Soft plastic. PIN ARRANGEMENTS MECHANICAL INSERTION/WITHDRAWAL FORCES: Number of Contacts 2 3 4 5 6 7 8 Insertion Force pound/N 3.6/(16) 5.4/(24) 7.2/(32) 9.0/(40) 10.8/(48) 12.6/(56) 14.4/(64) Withdrawal Force pound/N .45- 2.7/(2-12) .67- 4.1/(3-18) .90- 5.4/(4-24) 1.24- 6.8/(5.5-30) 1.46- 8.1/(6.5-36) 1.68- 9.5/(7.5-42) 1.90-10.8/(8.5-48) CONTACT ARRANGEMENTS NOTE: All connectors meet DIN specifications #41524. Din specification numbers (except for 4-pin, 5-pin @ 240, and 8-pin @ 262) DIN PLUGS STRAIGHT CORD PLUG STRAIGHT CORD PLUG with Shielded Barrel with 30 lock ring Type 05CL5M - typical Male plug with ground key-rib. Unique 30 turn lockring securely fastens two halves of connector. Mates with lock flange female connectors and receptacles. Insert screw holds insert assembly in shell and also retains lockring on shell. Flexible black strain relief with 7/32" diameter cable entry. Heavy duty clamp. ORDERING INFORMATION Part Number Description Pin Arrangement Type 15GM7M - typical: Male cord plug with shielded barrel and insulated snaplock plastic body. Two piece metal barrel surrounds pin insert to form an electrical shield. The entire insert assembly is held together by snapping the insulated plastic shell over the assembly. The barrel's special metal tab locks the shell in place. Standard color of plastic shell is gray. All-purpose cable clamp. ORDERING INFORMATION Part Number 05GM3M 05CL3M 3 pins at 180 2 05CL5M 5 pins at 180 5 09CL4M 4 pins at 210 3 09GM4M 12CL5M 5 pins at 240 4 15CL7M 7 pins at 270 7 15CL8M 8 pins at 270 9 Available on special order only; contact Switchcraft for price and delivery. 05GM5M 12GM5M 12GM6M 15GM7M 15GM8M 20GM8M Description 3 pins at 180 Gray body and strain relief. 5 pins at 180 Gray body and strain relief 4 pins at 210 Gray body and strain relief 5 pins at 240 Gray body and strain relief 6 pins at 240 Gray body and strain relief 7 pins at 270 Gray body and strain relief 8 pins at 270 Gray body and strain relief 8 pins at 262 Gray body and strain relief Pin Arrangement 2 5 3 4 6 7 9 10 SPECIFYING NOTE: Use letter "JL" in place of "GM" to order same part number with black housing. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery CONNECTORS & RECEPTACLES DIN PLUGS AND RECEPTACLES FAX: 773 792-2129 47 * Please visit the product pages on our website for the most up-to-date product information RIGHT-ANGLE CORD PLUG STRAIGHT CORD PLUG with Extended Barrel with 8 Position Barrel and 30 Lockring TYPE 12BL6M - TYPICAL TYPE 05YL5M - TYPICAL Male plug with ground key-rib. Nickel-plated diecast handle. Contact friction coupling. Flexible black strain relief. Heavy duty cable clamp. Right-angle chassis hugging, male plug with flexible strain relief. Unique 8-position barrel gives you a choice of any one of eight different cable entry angles. ground key rib 30 turn lockring securely fastens two halves of connector. ORDERING INFORMATION ORDERING INFORMATION Part Number 03BL2M 05BL3M 05BL5M 09BL4M 12BL5M 12BL6M 15BL7M 15BL8M Description 2 pins with insulated switch actuator 3 pins at 180 5 pins at 180 4 pins at 210 5 pins at 240 6 pins at 240 7 pins at 270 8 pins at 270 Pin Arrangement 1 2 5 3 4 6 7 8 Part Number 05YL3M 05YL5M 09YL4M 12YL5M Description 3 pins at 180 5 pins at 180 4 pins at 210 5 pins at 240 RIGHT-ANGLE CORD PLUG with 8 Position Barrel 05DL5M shown TYPE 05DL5M - TYPICAL Right-angle chassis hugging, male plug with flexible black rubber strain relief. Unique 8-position barrel offers a choice of eight different cable entry angles. ORDERING INFORMATION Part Number 05DL3M 05DL5M 09DL4M 12DL5M 12DL6M 15DL7M Description 3 pins at 180 5 pins at 180 4 pins at 210 5 pins at 240 6 pins at 240 7 pins at 270 Pin Arrangement 2 5 3 4 6 7 Available on special order only; contact Switchcraft for price and delivery. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 Pin Arrangement 2 5 3 4 CONNECTORS & RECEPTACLES DIN PLUGS AND RECEPTACLES 48 CONNECTORS & RECEPTACLES DIN PLUGS AND RECEPTACLES PHONE: 773 792-2700 CONNECTORS & RECEPTACLES * Please visit the product pages on our website for the most up-to-date product information DIN PLUGS AND RECEPTACLES (continued) STRAIGHT CORD PLUG with Flush Socket Insert STRAIGHT CORD PLUG with Lock Flange TYPE 06AL5F - TYPICAL TYPE 06EL5F - TYPICAL Female plug with ground contact. Diecast metal shell, nickel-plated. Two contact plug, Part number 04AL2F includes a break circuit switch (1-B) which is opened by engaging the insulated switch actuator of the mating plug or receptacle. Flexible black strain relief. Female plug with ground contact. Lock flange designed to accept 30 lockring. Insert screw firmly holds insert assembly in shell. Flexible black strain relief with 7/32" diameter cable entry. Heavy duty cable clamp. .216 5.5 .393 10.0 .216 5.5 2.24 57.0 .456 11.6 1.22 31.0 .622 15.8 0.51 1.3 Stain Relief ORDERING INFORMATION Part Number 06AL5F 13AL5F 13AL6F 15AL7F 15AL8F 5 5 6 7 8 Description contacts at 180 contacts at 240 contacts at 240 contacts at 270 contacts at 270 ORDERING INFORMATION Contact Arrangement F E G H N Part Number 06EL5F 13EL5F 15EL8F Description 5 contacts at 180 5 contacts at 240 8 contacts at 270 Contact Arrangement F E N RECEPTACLE with Extended Shell ORDERING INFORMATION TYPE 57KD3M - TYPICAL Male receptacle, 3 pins, with ground key-rib. Diecast extended shell and flange for chassis or panel mounting. Turret terminals. Part Number 57KD3M Description 3 pins at 180 Pin Arrangement 2 Available on special order only; contact Switchcraft for price and delivery. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery CONNECTORS & RECEPTACLES DIN RECEPTACLES FAX: 773 792-2129 49 * Please visit the product pages on our website for the most up-to-date product information RECEPTACLE with Closed Circuit Switch TYPE 59GB3F - TYPICAL Unique 3 and 5 contact receptacles include a 1-B (closed circuit) switch which is mounted to drawn metal shell. Switch is actuated by the shell of the mating plug. Receptacles also provide complete shielding through the ground contact. Flared solder terminals. 59GB3F Description 3 contacts at 180 plus closed-circuit switch (Schematic #5) for Chassis or Panel Mounting For shielded and extended barrel plugs TYPE 57GB5F - TYPICAL - FLARED SOLDER TERMINALS Drawn metal recessed shell with mounting flange and ground contact. Available flared solder terminals. Part Number 58GB3F features two extra blanks in insert for proper mating (5 pins at 180) plug where applications may require greater connector flexibility. Flared solder terminals standard. ORDERING INFORMATION ORDERING INFORMATION Part Number RECEPTACLE Contact Arrangement B Available on special order only; contact Switchcraft for price and delivery. Part Number Descriptions Contact Arrangement 57GB3F 3 contacts at 180 B 57GB5F 5 contacts at 180 F 60GB4F 4 contacts at 210 D 61GB5F 5 contacts at 240 E 61GB6F 6 contacts at 240 G 62GB7F 7 contacts at 270 H 62GB8F 8 contacts at 270 N Available on special order only; contact Switchcraft for price and delivery. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 CONNECTORS & RECEPTACLES DIN RECEPTACLES (continued) 50 CONNECTORS & RECEPTACLES DIN RECEPTACLES PHONE: 773 792-2700 CONNECTORS & RECEPTACLES * Please visit the product pages on our website for the most up-to-date product information DIN RECEPTACLES (continued) RECEPTACLE for Lockring Plug Flared solder terminals on Part Number 57HB5F RECEPTACLE TYPE 61HA5F - TYPICAL TYPE 57NC5F - TYPICAL Female receptacle with ground contact. Chassis or panel mount. Diecast bayonet extension shell with mounting flange. Mates with all lockring plugs. such as Part Number 12CL5M. Part Number 55HA2F includes closed-circuit switch (1-B). All receptacles have straight solder terminals, except as noted. Mounts to printed circuit boards. Special PC type terminals "snap-in" precut boards. See drawing. Tubular metal shell with ground contact. Part Number 58NC3F mates with either 3 pin or 5 pin (at 180) plugs because of its 2 extra blanks in the contact insert. for Printed Circuit Board Mounting ORDERING INFORMATION Part Number 55HA2F ORDERING INFORMATION Description 2 contacts with closed-circuit switch (Schematic #4) Pin Arrangement A 57HB3F* 3 contacts at 180 B 57HB5F* 5 contacts at 180 F 60HA4F 4 contacts at 210 D 61HA5F 5 contacts at 240 E 62HB7F* 7 contacts at 270 H 62HB8F* 8 contacts at 270 N Part Number Description Contact Arrangement 57NC5F F 58NC3F 5 contacts at 180 3 contacts at 180 2 extra blanks 60NC4F 4 contacts at 210 61NC5F 5 contacts at 240 E 62NC7F 7 contacts at 270 H 62NC8F 8 contacts at 270 N C D "C" in part number indicates PC terminals. Available on special order only; contact Switchcraft for price and delivery. *Flared solder terminals "A" in part number indicates straight terminal. (solder lug). Available on special order only; contact Switchcraft for price and delivery. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery CONNECTORS & RECEPTACLES DIN RECEPTACLES FAX: 773 792-2129 51 * Please visit the product pages on our website for the most up-to-date product information ORDERING INFORMATION for Printed Circuit Board Mounting TYPE 57PC5F-TYPICAL Mounts to PC boards. Plugs connect at right-angle to mounting surface. Part Number 57PC3F mates with either 3 or 5 pin (at 180) plugs because of two extra blanks in contact insert. ground contact provides complete shielding through receptacles. Part Number Description Contact Arrangement 57PC3F 3 contacts at 180 B 57PC5F 5 contacts at 180 F 60PC4F 4 contacts at 210 D 61PC5F 5 contacts at 240 E 61PC6F 6 contacts at 240 G 62PC7F 7 contacts at 270 H 62PC8F 8 contacts at 270 N Available on special order only; contact Switchcraft for price and delivery. 61PC5F, 61PC6F .709 DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 CONNECTORS & RECEPTACLES RIGHT-ANGLE RECEPTACLE 52 CONNECTORS & RECEPTACLES DIN RECEPTACLES PHONE: 773 792-2700 CONNECTORS & RECEPTACLES * Please visit the product pages on our website for the most up-to-date product information Part Number Description Contact Arrangement 57PC3FS 3 contacts at 180 B 57PC5FS 5 contacts at 180 F 60PC4FS 4 contacts at 210 D 61PC5FS 5 contacts at 240 E 61PC6FS 6 contacts at 240 G 62PC7FS 7 contacts at 270 H 62PC8FS 8 contacts at 270 N SPECIFYING NOTE: Another series of receptacles with a trimmed metal flange .052" (1.32 mm) below housing top is available. Replace suffix "S" with "T" in part numbers above to specify these receptacles or contact Switchcraft. Mounting: #2 or #3 self-tapping screw. Available on special order only; contact Switchcraft for price and delivery. RIGHT-ANGLE SHIELDED RECEPTACLE for printed circuit board mounting TYPE 60PC4FS-TYPICAL Similar to 57PC5F - Typical, except flange surrounding face of insert is metal to provide through-grounding between plug and receptacle and to potential panel/chassis for common grounding. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery CONNECTORS & RECEPTACLES MINI-DIN RECEPTACLES FAX: 773 792-2129 53 * Please visit the product pages on our website for the most up-to-date product information MINI-DIN RIGHT-ANGLE RECEPTACLES Miniature DIN right-angle connectors are designed for personal computer, video and data communications, medical and instrumentation equipment and systems. RIGHT-ANGLE, PC MOUNT RECEPTACLES Available with 3 through 8 contacts, female only, receptacles also have a standard (and separate) ground contact system. Ground terminal can be straight or snap-in type. Snap-in terminals are bifurcated to assure tight hold down on PC board before, during and after soldering. Solder wicking around the terminal strengthens the connection. Additionally, PC terminals are staggered to assure more "hold down" capability during soldering. Receptacle/plug retention is "friction" type, and a separate outer shield can be specified. Series SMD*FRAX10: 3 through 8 contacts, female, right-angle PC mount, straight ground terminal, and no outer shield. Series SMD*FRAX20: Same as SMD*FRAX10, except with bifurcated snap-in ground terminal. Series SMD*FRAX11: 3 through 8 contacts, female, right-angle PC mount, straight ground terminal, and outer shield. Series SMD*FRAX21: Same as SMD*FRAX11, except with snap-in ground terminal. Series DMD*FRAX111: Dual stacked miniature DIN connectors, available in 4, 5, 6, and 8 contacts. Shielded and non-shielded versions available. Dimensions: .552" (14 mm) wide x .502" (12.8 mm maximum depth x .642" (16.3 mm) height, including terminals. SPECIFICATIONS Ratings: 1A, 100 VAC; 2A, 12 VDC. Insulation Resistance: 50 M minimum Dielectric Strength: 250 VDC for 1 minute. Contact Resistance: 30 m maximum Insertion/Withdrawal Force: 0.8 to 5 kilograms Withdrawal Force: 0.8 to 4 kilograms Contacts/Terminals: Copper alloy, silver or gold-plated Ground Terminal: Copper alloy, nickel-plated. External Shield: Copper alloy, solder-coated. Body: Black molded thermoplastic, UL 94V-0. MINI-DIN RIGHT-ANGLE RECEPTACLES PART NUMBER SCHEME Series Contacts SMD-Single Insert #: DMD-Dual 3-8 Style FRA Shield/Ground 110: Unshielded, no snap-in ground 111: Shielded, no snap-in ground 120: Unshielded, snap-in ground 121: Shielded, snap-in ground Optional Mounting Screw Hole A: Adds screw hole Blank: None Note: Dual available in 4,5,6, and 8 only Note: Snap-in ground available on single only Note: Optional mounting screw hole available on dual only Note: Special order only, contact factory for details DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 CONNECTORS & RECEPTACLES DIN RECEPTACLES (continued) 54 CONNECTORS & RECEPTACLES MINI-DIN RECEPTACLES PHONE: 773 792-2700 CONNECTORS & RECEPTACLES * Please visit the product pages on our website for the most up-to-date product information DIN RECEPTACLES (continued) SMD SERIES RECOMMENDED PC BOARD LAYOUTS (Viewed from component side) DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery CONNECTORS & RECEPTACLES MINI-DIN RECEPTACLES FAX: 773 792-2129 55 * Please visit the product pages on our website for the most up-to-date product information CONNECTORS & RECEPTACLES DIN RECEPTACLES (continued) DMD SERIES DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 56 CONNECTORS & RECEPTACLES SINGLE AND DUAL STACKED USB CONNECTORS PHONE: 773 792-2700 CONNECTORS & RECEPTACLES * Please visit the product pages on our website for the most up-to-date product information SINGLE AND DUAL STACKED USB CONNECTORS SUSB DUSB Switchcraft introduces single and dual USB connectors. The USB connectors are fast becoming the industry standard for plug and play connectivity between PCs and their peripherals. The DUSB and USB connectors are RAPC mounted, with kinked terminals for snap-in placement to the PC board. Both meet all Universal Serial Bus standards. FEATURES AND BENEFITS * Snap-in terminals facilitate wave soldering * Shielded for reduced EMI/RFI emissions * Dual stacked version increases PC board density APPLICATIONS * Personal Computer * Data Communications * Medical Equipment * Test Equipment * Instrumentation SPECIFICATIONS GENERAL Voltage Rating: 30 VAC (rms) Max. Current Rating: Signal application only, 1A Max. per contact Contact Resistance: 25m ohms Max. initial Temperature Rating: 32F to 104F (0C to 40C) Insertion Force: 7.7 lbs Max. (3.5 kg Max.) Withdrawal Force: 0.8 lb Min. (0.4 kg Min.) Life: 1500 cycles MATERIALS Body: Black, molded thermoplastic, UL 94V-0 Shell: Copper alloy, tin plated Contact Terminal: Copper alloy, gold plating in mating area, tin plating on solder tails, all over nickel plating. Part Number SUSB Single DUSB Dual Stacked Description USB Connector USB Connector Note: Special order only, contact factory for details. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery CONNECTORS & RECEPTACLES FAX: 773 792-2129 SINGLE AND DUAL STACKED USB CONNECTORS 57 * Please visit the product pages on our website for the most up-to-date product information DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 CONNECTORS & RECEPTACLES SINGLE AND DUAL STACKED USB CONNECTORS (continued) 58 CONNECTORS & RECEPTACLES IEEE 1394 FIREWIRE CONNECTORS PHONE: 773 792-2700 CONNECTORS & RECEPTACLES * Please visit the product pages on our website for the most up-to-date product information IEEE 1394 FIREWIRE CONNECTORS 1394SMT 1394RAPC Switchcraft introduces both right angle PC and surface mount versions of IEEE 1394 Firewire connectors. The Firewire connectors are becoming another connector standard used in the upcoming multimedia/computer market. The connectors meet IEEE 1394R-4006N Series standards. FEATURES AND BENEFITS * Shielded housings to reduce EMI/RFI emissions * Mounting posts add stability for wave soldering * Low profile requires less space APPLICATIONS * Multimedia * Video * Personal Computers * Computer Peripherals SPECIFICATIONS GENERAL Voltage Rating: 40 VAC Current Rating: 1.5A Contact Resistance: 30m Ohms Max. Temperature Rating: -55C to +105C Insertion Force: 6.0 lbs. Max. Withdrawal Force: 4.4 lbs. Min. Lifecycles: 1,500 Min. Part Number 1394RAPC 1394SMT Description IEEE 1394 RAPC IEEE 1394 SMT Note: Special order only, contact factory for details. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery CONNECTORS & RECEPTACLES IEEE 1394 FIREWIRE CONNECTORS FAX: 773 792-2129 59 * Please visit the product pages on our website for the most up-to-date product information DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 CONNECTORS & RECEPTACLES IEEE 1394 FIREWIRE CONNECTORS (continued) 60 CONNECTORS & RECEPTACLES SLIM-LINE CONNECTORS PHONE: 773 792-2700 CONNECTORS & RECEPTACLES * Please visit the product pages on our website for the most up-to-date product information SLIM-LINE CONNECTORS TYPICAL SL172F REAR MOUNT RECEPTACLE HEX NUT Used in mounting rear or front of panel receptacles (supplied standard). TYPICAL SL402M CORD PLUG THREADED BUSHING Coupler ring on mating plug threads onto bushing and keeps plug/receptacle from working loose. FEMALE INSERT* Rugged molded black plastic barrel construction; positively keyed to housing. FLATTED BARREL Keys to inside flat on male insert. Polarizes the connection. Correct mating every time. PIN TERMINALS Large, rugged plated copper alloy; solder cup type. CABLE CLAMP Extra large and rugged clamp protects soldered terminations (also facilitates grounding/ shielding feature when used on receptacle insert). CORD PLUG HOUSING Precision-drawn, plated copper alloy with non-glare matte finish. STRAIN RELIEF SPRING Provides positive relief from cable wear at opening in plug housing. FLAT WASHER Used in mounting rear and front of panel receptacles (supplied standard). CONTACT TERMINALS Rugged solder lug type; copper alloy plated CONTACTS Held captive in insert. Excellent pin retention force. Copper alloy plated. MALE INSERT* Rugged black plastic; keyed to housing. Durable plated copper alloy pins are 100% molded-in. LATCH SPRING Captive spring locks insert to housing COUPLER RING Held captive on plug; non-reflective matte finish. Threads onto receptacle bushing (or mating plug) to hold connector halves secure from accidental separation. LATCH DETENT Latch spring on insert seats in detent to hold insert firmly in housing. LOCK WASHER Prevents rear or front of panel receptacle from working loose when installed (supplied standard). REAR OF PANEL MOUNT RECEPTACLE Tough, plated diecast housing with non-reflecting matte finish. Mounts in D-shape (selfkeyed) hole. Other receptacle types are: Front of Panel Mount and Flange Mount. *NOTE: Insert fits both plug and receptacle housings; can be interchanged at any time. DESIGN FEATURES Slim-Line(R) Audio Connectors are a unique series of premium quality connectors featuring interchangeable inserts which allow any plug or receptacle to be male or female. This versatility is valuable in a wide variety of applications: microphones, public address systems, 2-way, CB, ham, and marine radios, audio-visual systems, industrial control and instrumentation, broadcast, security and medical electronics. APPLICATIONS Retrofit/Replacement; Slim Line Cord Plug (SL405M) and Receptacle (SL105F) are recommended as a possible choice to replace Switchcraft/DIN plug (12CL5M) and receptacle (55HA5F). Receptacle SL105F fits the same mounting holes as the Switchcraft/DIN receptacle. Four pin/contact Slim-Line plugs and receptacles are recommended as direct replacements for the original Slim-Line connectors, Series 2504, and for the molded version of the Slim-Line connector, Style ST34. RECEPTACLES Receptacles can be specified with same male and female insert combinations as cord plugs. For rear and front of panel mounting types, hex nuts, lock washers, and flat washers are supplied. For flange mount receptacles, mounting holes in flange accept #4 machine screw or .125" (3.18 mm) diameter rivet. CORD PLUGS Miniature Cord Plugs feature nickel-plated copper alloy housings with matte finish on exterior parts. Plugs may be specified with inserts having 2-, 3-, 4- and 5-pins (male) or contacts (female), or 2-, 3-, or 4-contact receptacles having shunts (N.C.) on two contacts (special order only). Extra large cable clamp protects against pulling and twisting strains on terminations. Strain relief spring protects against excess cable wear at entry point at rear of housing. Cord plugs accept cables up to .281" (7.14 mm) diameter. Captive coupler ring feature (Series SL40) provides secure mechanical connection and protection against shock and vibration between cord plugs and mating plug (Series SL41) or receptacle. Three types of receptacles can be specified: 1. Flange mount (Series SL10) 2. Rear of panel mount (Series SL17) DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery CONNECTORS & RECEPTACLES SLIM-LINE CONNECTORS FAX: 773 792-2129 61 * Please visit the product pages on our website for the most up-to-date product information SPECIFICATIONS INSERTS Inserts are molded of high-strength plastic, and are completely interchangeable between plug and receptacle housings at any time. Inserts are keyed to housings, and male and female inserts are polarized to prevent mismating. PIN/CONTACT CONFIGURATIONS: Pins 2 3 4 5 Contacts 2 3 4 5 Contacts (Shunts) 2 (N.C. Shunt on each contact) 3 (N.C. Shunts on contacts 1 and 3) 4 (N.C. Shunts on contacts 1 and 4) _ Add an "S" to end of part number for shunts. Special order only. MATERIALS Receptacle Housings: Die-cast zinc, nickel-plated. Cord Plug Housings: Copper alloy, nickel-plated. Inserts: Glass-reinforced thermoplastic. UL 94 V-0. Female Contacts: Copper alloy, silver-plated, solder lug type. Pins: Copper alloy, silver-plated, solder cup type. Cable Clamp, Strain Relief, and Mounting Hardware: Steel, plated. Latch: Steel, plated. ELECTRICAL Current Rating: 5 Amps carry only. MOUNTING Cord Plugs: Plugs accept cables up to .281" (7.14 mm) diameter. Insert is installed from front, and the captive latch spring locks insert to housing. To remove insert from receptacle, depress latch spring and apply pressure to rear of insert (DO NOT APPLY PRESSURE TO TERMINALS). On cord plugs, depress latch spring and press in on strain relief to free the insert. GROUNDING/SHIELDING Housings shield internal connections and provide ground (common) connections without using a pin/contact. On cord plugs, ground lead (or shield) is connected to cable clamp. For receptacles Cable Clamp, SL04 is ordered separately as a special and installed. If desired, ground/shield connection may then be made to clamp. When mated, a continuous, shielded, low resistance path is made through the connector. Receptacles: Flange mount type mounts in panels or chassis up to .188" (4.78 mm) thick. .125" (3.18 mm) diameter holes accept #4 machine screws or .125" (3.18 mm) diameter rivets. Rear and front of panel types mount in "D"-shaped hole in panels or chassis up to .219" (5.56 mm) thick. Hex nut (SL01), lockwasher (SL02), and flat washer (SL03) are supplied for mounting. CABLE CLAMP AND STRAIN RELIEF Cord Plugs: Plugs are supplied with rugged cable clamps and strain relief springs. Cable clamp serves two valuable functions: to firmly hold cable to prevent pulling or twisting strains on soldered terminations, and as a connecting point for ground (common) or shield when grounding/shielding through the connector is required. Receptacles: Receptacles are not supplied standard with cable clamp for strain relief. If grounding/shielding feature is desired, separate Cable Clamp, SL04, is installed on receptacle insert. Part Number Item SL01 Hex Nut SL02 Lockwasher SL03 Flat Washer SL04 Cable Clamp SL05 Strain Relief Spring MOUNTING HARDWARE (Supplied with Series SL17 and SL18 receptacles) SLIM-LINE CONNECTOR PART NUMBERING SYSTEM SERIES SL HOUSING TYPE SLIM-LINE 10 17 18 40 41 NONE RECEPTACLE, FLANGE MOUNT RECEPTACLE, REAR MOUNT RECEPTACLE, FRONT MOUNT CORD PLUG WITH COUPLING RING CORD PLUG WITHOUT COUPLING RING Number of Contacts 2 3 4 5 Gender M MALE F FEMALE PIN AND CONTACT ARRANGEMENTS SCHEMATIC CIRCUITS DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 Options S WITH SHUNTS CONNECTORS & RECEPTACLES SLIM-LINE CONNECTORS (continued) 62 CONNECTORS & RECEPTACLES SLIM-LINE CONNECTORS PHONE: 773 792-2700 CONNECTORS & RECEPTACLES * Please visit the product pages on our website for the most up-to-date product information SLIM-LINE CONNECTORS (continued) SL40 CORD PLUG with Coupler Ring SL41 CORD PLUG without Coupler Ring SL413F (typical) SL402M (typical) Non-reflective metal shell; coupling ring; 2 through 5 pins (male) or 2 through 5 contacts (female). Also 2-, 3- and 4-contact inserts with two shunted (N.C.) contacts. Efficient cable clamp and strain relief. Non-reflective metal shell; 2 through 5 pins (male) or 2 through 5 contacts (female). Also 2-, 3- and 4-contact inserts with two shunted (N.C.) contacts. Efficient cable clamp and strain relief. SL MALE CORD PLUGS SL MALE CORD PLUGS Part Number Pins Pin Arrangements SL402M SL403M SL404M SL405M 2 3 4 5 1 2 3 4 SL FEMALE CORD PLUGS Part Number Pins Pin Arrangements SL413M SL414M SL415M 3 4 5 2 3 4 SL FEMALE CORD PLUGS Part Number Contact Contact Arrangements Part Number Contacts Contact Arrangements SL402F SL403F SL404F SL405F 2 3 4 5 A B C D SL412F SL413F SL414F SL415F 2 3 4 5 A B C D STRAIN RELIEF SPRING Strain Relief Spring Part Number SL05 Available on special order only; contact Switchcraft for price and delivery. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery CONNECTORS & RECEPTACLES SLIM-LINE CONNECTORS FAX: 773 792-2129 63 * Please visit the product pages on our website for the most up-to-date product information SL10 RECEPTACLES SL17 RECEPTACLES Flange Mount Rear of Panel Mount SL104F (typical) SL175F (typical) SL17 and SL18 Receptacles Non-turn panel cut-out Flange mounted; 2 through 5 pins (male) or 2 through 5 contacts (female). Also 2-, 3- and 4-contact inserts with 2 shunted (N.C.) contacts. Rear of panel mount; 2 through 5 pins (male) or 2 through 5 contacts (female). Also 2-, 3- and 4-contact inserts with 2 shunted (N.C.) contacts. Mounting locknut (Part Number SL01), lock washer (Part Number SL02), and flat washer (Part Number SL03) supplied. SL MALE RECEPTACLES SL MALE RECEPTACLES Part Number Pins Pin Arrangements SL102M SL103M SL104M SL105M 2 3 4 5 1 2 3 4 SL FEMALE RECEPTACLES Part Number Pins Pin Arrangements SL173M SL174M SL175M 3 4 5 2 3 4 SL FEMALE RECEPTACLES Part Number Contacts Contact Arrangements Part Number Contacts Contact Arrangements SL102F SL103F SL104F SL105F 2 3 4 5 A B C D SL172F SL173F SL174F SL175F 2 3 4 5 A B C D Available on special order only; contact Switchcraft for price and delivery. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 CONNECTORS & RECEPTACLES SLIM-LINE CONNECTORS (continued) 64 CONNECTORS & RECEPTACLES SLIM-LINE CONNECTORS PHONE: 773 792-2700 CONNECTORS & RECEPTACLES * Please visit the product pages on our website for the most up-to-date product information SLIM-LINE CONNECTORS (continued) SL18 RECEPTACLES INSTALLING CABLE CLAMP ON INSERT Front of Panel Mount To install cable clamp on any insert: 1. Position insert approximately as shown in the diagram. 2. Hold clamp at approximately 30 angle (as shown). Place tip of clamp center finger into slot under molded ring "A". Note position of notch on insert in relation to slot. 3. Press center finger forward into slot and reduce angle of clamp until clamp shoulders seat just ahead of molded barrier on rear of insert "B". SL183FS (typical) Cable Clamp SL04 .696 PANEL HOLE (17.7) MOLDED RING "A" CABLE CLAMP NOTCH ON INSERT INSERT "B" Front of panel mount; 2 through 5 pins (male) or 2 through 5 contacts (female). Also 2-, 3- and 4-contact insert with 3 shunted (N.C.) contacts. Mounting locknut (Part Number SL01), lockwasher (Part Number SL02), and flat washer (Part Number SL03) supplied. SL MALE RECEPTACLES Part Number Pins Pin Arrangements SL182M SL183M SL184M SL185M 2 3 4 5 1 2 3 4 SL FEMALE RECEPTACLES Part Number Contacts Contact Arrangements SL182F SL183F SL184F SL185F 2 3 4 5 A B C D DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery CONNECTORS & RECEPTACLES AUDIO CONNECTORS FAX: 773 792-2129 65 * Please visit the product pages on our website for the most up-to-date product information CONNECTORS & RECEPTACLES CB CONNECTORS Miniature 3 and 4 circuit connectors for microphone connections in mobile/communications equipment. Cord plug has silver-plated copper alloy contacts, large cable clamp, and strain relief spring. CB-3F CB-3F 3-contact female cord plug. Knurled coupling ring has internal metric M16x1 thread. Solder lug terminals accept wires up to #18 AWG. Accommodates cables up to .281" (7.14 mm) diameter. CB-4F Same as CB-3F. except 4 contacts. CB-3M 3-pin male receptacle. Housing keys insert of mating plug; bushing with external M16x1 metric thread mates with coupling ring on plug. Cup-type terminals accept wires up to #16 AWG. Mounts in .64" (16.26 mm) diameter hole from front of panels up to .125" (3.18 mm) thick, using washer and locknut supplied. Can also be "D"-hole mounted for non-turn mounting (see drawing). Pin diameter. is .093". CB-4M Same as CB-3M, except 4 pin. Insert Part No. CB3F CB3M Contacts 3 3 CB-3M Dimensions, In. (mm) Length Diameter 1.594 (40.49) .703 (17.86) .781 (19.84) .705 (19.05) MICROPHONE CONNECTORS Connectors with 5/8-27 threads are designed for use with single conductor microphone cable with .281" (7.14 mm) maximum outside diameter. 44 adapts 2501F to fit standard 2-conductor phone jack. Coupling ring on 2501F is removable for fast change from female to male type. Spring assembled into body, cable braid and spring clamped by hollow set screws .281" (7.14 mm) maximum cable diameter. 2501MP mounts in .390" (9.92 mm) diameter hole. 44 2501F 2501M 2501MP MINI-CON MINIATURE CONNECTORS Approximately 1/2 the size of standard microphone connectors. Ideal for miniature lapel microphones, musical instruments and wherever small cable is used. Accepts single-conductor shielded cable up to .187" (4.76 mm) diameter Coupling ring on 5501F removable for quick change of female to male type. Cable is braid spring clamped to body by hollow point set screw. Part Number 5501F 5501M Description Female Plug Male Plug 5501MF Receptacle 5501MP Receptacle Mounting Hole, Inches (mm) -- -- .375 (9.52) (Front of panel) .375 (9.52) (Front of panel) 5501F 5501M 5501MF 5501MP Available on special order; contact Switchcraft for price and delivery. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 66 CONNECTORS & RECEPTACLES BNC CONNECTORS PHONE: 773 792-2700 CONNECTORS & RECEPTACLES * Please visit the product pages on our website for the most up-to-date product information HP75BNC SERIES BNC CONNECTORS Switchcraft Inc. introduces a complete line of true 75 Ohm BNC cable mount connectors. This new series was developed for the broadcast industry, or wherever true 75 Ohm impedance BNC's are used. The HP75BNC Series is available in a wide range of styles, to accommodate the most popular types of coaxial cables. All are crimp terminated using standard crimping tools. FEATURES AND BENEFITS * True 75 Ohm impedance * Gold-plated center pins for increased life * Available for a wide range of cable types * Outstanding electrical performance * Rugged nickel-plated, machined shells SPECIFICATIONS Electrical Characteristic Impedance: 75 Ohms Voltage Rating: 500 Volts RMS Return Loss: Less than -25 db at 3 GHz Insulation Resistance: 5000 Megohms min HP75BNC9 MECHANICAL Lifecycles: 500 min Center Contact Retention: 6 lbs. min Coupling Mechanism: 100 lbs. min Force to Engage: 2.5 lbs. max ENVIRONMENTAL Thermal Shock: -65 C to 165 C Moisture Resistance: Mil Std 202 Corrosion: Mil Std 202 Flammability: UL 94-VO Vibration: Mil Std 202 Solvent Resistance: Mil Std 202 FINISH Body/Bayonet: Nickel-plated copper alloy Center Conductor: 50 mi gold-plated copper alloy ORDERING INFORMATION Part Number HP75BNC1 HP75BNC2 HP75BNC6 HP75BNC7 HP75BNC9 HP75BNC10 HP75BNC12 DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Cable Type Belden #8241 Belden #8281B Belden #1695A Belden #1694A Belden #1505A Belden #1506A Belden #1855A Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery CONNECTORS & RECEPTACLES BNC CONNECTORS FAX: 773 792-2129 67 * Please visit the product pages on our website for the most up-to-date product information CONNECTORS & RECEPTACLES HP75BNC SERIES BNC CONNECTORS (continued) S 11 log MAG REF -15 dB 5 dB / DIV .30 MHz 3.0 GHz 1.5 GHz RETURN LOSS DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 68 CONNECTORS & RECEPTACLES EAC RECEPTACLES PHONE: 773 792-2700 CONNECTORS & RECEPTACLES * Please visit the product pages on our website for the most up-to-date product information EAC RECEPTACLES SERIES EAC Two and three-pin/contact grounding primary power receptacles are designed to meet EN 60 320, as well as applicable UL, CSA, VDE and other specifications. Receptacles feature choice of short, standard or long solder lugs or FASTON (R) terminals. Receptacles snap-in or screw mount from the front or rear of panel. Receptacles have orbitally riveted lugs (except EAC233, EAC305, EAC323 EAC325, EAC333, EAC405) for superior mechanical/electrical connections. Extended socket versions permit minimum behind-panel depth. Receptacles are designed for use in European and domestic instrumentation, power rack mounted devices, test equipment and appliances. Three-pin male receptacles have .125" (3.18 mm) longer center (ground) pin. Ground circuit is established before power circuits "make", and is maintained until after power circuits "break". EAC227 EAC311 EAC305 EAC323 EAC309 EAC325 EAC333S EAC333 DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery CONNECTORS & RECEPTACLES EAC RECEPTACLES FAX: 773 792-2129 69 * Please visit the product pages on our website for the most up-to-date product information EAC305--3-contact female receptacle. Front mount with two, #4 screws or .094" (2.38 mm) diameter rivets (not supplied). SERIES EAC EAC309--3-pin male receptacle with standard lug terminals. Mounts from front or rear of panel with two, #5 screws or .125 " (3.18 mm) diameter rivets (not supplied). EAC311--3-pin male receptacle with FASTON(R) terminals. Mounts from front or rear of panel with two, #5 screws or .125 " (3.18 mm) diameter rivets (not supplied). EAC315--3-pin male receptacle with long solder lug terminals. Mounts from front or rear of panel with two, #5 screws or .125" (3.18 mm) diameter rivets (not supplied). EAC405 EAC319--3-pin male receptacle with short solder lug terminals. Mounts from front or rear of panel with two, #5 screws or .125" (3.18 mm) diameter rivets (not supplied). SPECIFICATIONS ELECTRICAL Insulation Resistance: 2 million megohms @ 500 V DC. Dielectric Strength: 1500 V (rms). Arcing Test: Meets UL 498 Standard. MECHANICAL Solderability Standard: Meets MIL-STD-202, method 208, EIA RS-186-9E. ENVIRONMENTAL Thermal Range: -55 C to +65 C (except EAC45x series). Salt Spray: Meets MIL-STD-202, method 101; EIA-RS-186-5E, method 5. MATERIAL Shell: EAC307 through EAC327. Black polyester. EAC303, EAC307 through EAC315. UL flammability rating of UL94 V-0, yellow card #E45575. EAC309 through EAC327, EAC333. Black polyester, UL flammability rating of UL94 V-0, yellow card #E45575. EAC233, EAC233S, EAC305, EAC325, and EAC333S. Black polycarbonate, UL flammability rating of UL94 V-0, yellow card #E45329. EAC323, EAC409 through EAC411 Black polycarbonate, UL flammability rating, or equivalent UL94 V-0, yellow card #E33640, or equivalent. Pins, Contacts and Terminals: Plated copper alloy. EAC227--2-pin male receptacle with standard solder lug terminals, similar to EAC327. EAC233--2-pin, male receptacle with right-angle housing for PC mount. PC terminals project .130" (3.3 mm) to extend through PC board. Rear of panel mount. Two, .136 " (3.45 mm) diameter holes permit fastening to PC board; two additional .136" (3.45 mm) holes are for fastening to panel or chassis, if required. EAC233S--Similar to EAC233, but with two, snap-in retainers through mounting flanges for PC mount. EAC323--3-pin male receptacle with short solder lug terminals. Extended socket housing (mounting flange on rear of receptacle) provides more behind panel clearance. Mounts with two, #4 screws or .094" (2.38 mm) diameter rivets (not supplied). EAC325--3-contact female receptacle with short solder lug terminals. Extended housing (mounting flange on rear of receptacle) provides more behind panel depth. Mounts with two, #4 screws or .094" (2.38 mm) diameter rivets (not supplied). EAC327--3-pin male receptacle, similar to EAC319 except with standard solder lugs. EAC333--3-pin, 10A, 250V male receptacle with right-angle housing for PC mount. PC terminal and hole mounting details are the same as for EAC233. Ground pin is integral with ground solder lug on rear of receptacle. EAC333S--Similar to EAC333, but with two, snap-in retainers through mounting flanges for PC mount. EAC405--3-contact female receptacle with standard solder lug terminals. Snap-in panel mounting. EAC409--3-pin male receptacle with standard solder lug terminals. Snap-in panel mounting. EAC411--3-pin male receptacle with FASTON terminals. Snap-in panel mounting. EAC413--3-pin male receptacle with FASTON terminals on LINE and NEUTRAL and a solder lug on EARTH GROUND. Snap-in panel mounting. EAC451--3-contact female receptacle with straight PC terminals for use in "HOT" applications. Snap-in panel mounting. EAC453--Same as EAC451 except with solder lug terminations. EAC455--Same terminations. as EAC451 except with FASTON EAC457--Same as EAC451 except with FASTON power terminations and solder lug ground termination. Available on special order only; contact Switchcraft for price and delivery. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 CONNECTORS & RECEPTACLES EAC RECEPTACLES (continued) 70 CONNECTORS & RECEPTACLES EAC RECEPTACLES PHONE: 773 792-2700 CONNECTORS & RECEPTACLES * Please visit the product pages on our website for the most up-to-date product information SERIES EAC (continued) Pins/ Contacts 1 Mounting 2 Terminals EAC227 M Front or Rear Solder Lug EAC233 M Rear PC EAC233S M Rear PC EAC305 F Front Solder Lug EAC309 M Front or Rear Solder Lug Part Number Listings UL CSA UL, CSA, VDE Switchcraft Mating Number 3 Ratings 15 A, 250 V AC P2392 -- 15 A, 250V AC 10 A, 250 V AC P2392 Semko, Demko, Nemko, SETI, and SEV Approved P2392 Semko, Demko, Nemko, SETI, and SEV Approved -- Semko, and SEV Approved UL, CSA, 15 A, 250 V AC VDE 10 A 250 V AC UL & VDE 15 A, 250 V AC VDE 10 A, 250 V AC UL & CSA 15 A, 250 V AC VDE 10 A, 250 V AC UL & CSA 15 A, 250 V AC VDE 10 A, 250 V AC EAC311 M Front or Rear FASTON EAC315 M Front or Rear Solder Lug (Long) UL & CSA 15 A, 250 V AC VDE 10 A, 250 V AC UL & CSA VDE EAC319 M Front or Rear Solder Lug (Short) EAC323 M Front or Rear Solder Lug (Short) UL & CSA 15 A, 250 V AC VDE 10 A, 250 V AC EAC325 F Rear Solder Lug (Short) UL & CSA 15 A, 250 V AC VDE 10 A, 250 V AC EAC327 M Front or Rear Solder Lug UL & CSA 15 A, 250 V AC VDE 10 A, 250 V AC UL, & VDE 15 A, 250 V AC CSA 10 A, 250 V AC EAC333 M Rear PC EAC333S M Rear PC EAC405 5 F Snap-In Solder Lug EAC409 5 M Snap-In Solder Lug EAC411 5 M Snap-In FASTON EAC413 5 M Snap-In Solder Lug/ FASTON EAC4516 F Snap-In6 PC EAC4536 F Snap-In6 Solder Lug EAC4556 F Snap-In6 FASTON EAC4576 F Snap-In6 Solder Lug/ FASTON Comments 4 15 A, 250 V AC UL & VDE 15 A, 250 V AC CSA 10 A, 250 V AC UL & CSA 15 A, 250 V AC VDE 10 A, 250 V AC UL, & CSA 15 A, 250 V AC VDE 10 A, 250 V AC UL, CSA VDE 15 A, 250 V AC 10 A, 250 V AC UL, CSA 15 A, 250 V AC VDE 10 A, 250 V AC UL, & CSA 15 A, 250 V AC VDE 10 A, 250 V AC UL, & CSA 15 A, 250 V AC VDE 10 A, 250 V AC UL, & CSA 15 A, 250 V AC VDE 10 A, 250 V AC UL, & CSA 15 A, 250 V AC VDE 10 A, 250 V AC P2392 P2392 Demko, Semko, Nemko, SETI and SEV Approved Semko, Demko, Nemko, SETI and SEV Approved P2392 Semko, Demko, Nemko, SETI and SEV Approved P2392 -- P2392 -- P2392 Mounting flange on rear Semko, Nemko, SETI Approved Mounting flange on rear Demko, Semko, Nemko SETI and SEV Approved P2392 Semko, Demko, Nemko, SETI, SEV Approved P2392 Semko, Demko, Nemko, SETI, SEV Approved -- -- P2392 Demko, Semko, Nemko, SETI and SEV Approved P2392 Semko, Demko, Nemko, SETI and SEV Approved Semko, Demko, Nemko, P2392 SETI and SEV Approved -- Rated for use up to 120C -- Rated for use up to 120C -- Rated for use up to 120C -- Rated for use up to 120C If you have been using a 15 amp rated Switchcraft EAC connector 1 M = Male; F = Female. ending in an even number, you can now buy an identical part number 2 F = Front; R = Rear. See mounting drawings for mounting details. that has a 10 amp European rating in addition to the 15 amp UL and 3 Also mates with Belden and other standard cords. CSA approval. The part number for the new dual rated part is one 4 Semko (Sweden), Demko (Denmark), Nemko (Norway), SETI (Finland), SEV (Switzerland). less than the old part number (eg. EAC310 becomes EAC309, 5 Receptacles are snap-in mount, and can be ordered to accommodate EAC412040 becomes EAC411040, EAC234 becomes EAC233, .030, .040, .050 and .060 inch panel thickness. For snug fit in panel or EAC458050 becomes EAC457050, etc.) for other specifying assistance, contact Switchcraft. 6 Available only for .050 inch and .060 inch panel thickness Available on special order only; contact Switchcraft for price and delivery. UL No. E38829--EAC-309 thru -327 UL No. E65081--EAC-305 CSA Guide 365-E-1, Class 6233, File Card No. LR27474 Inch VDE Certificate of Compliance No. 731 (EAC-305, -325, -405), DIMENSIONS ARE FOR REFERENCE ONLY all others VDE approval No. 3181. (mm) www.switchcraft.com (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery CONNECTORS & RECEPTACLES EAC RECEPTACLES FAX: 773 792-2129 71 * Please visit the product pages on our website for the most up-to-date product information SERIES EAC Front Mount EAC227, EAC309, EAC311, EAC315, EAC319, EAC327 Front Mount EAC305 Figure 2 Rear Mount EAC323 Figure 6 Front Mount EAC323 Figure 4 EAC233, EAC309, EAC311, EAC315, EAC319, EAC327, EAC333 Figure 7 Front Mount EAC225 Figure 5 Rear Mount EAC325 Figure 9 Snap-in Mount EAC409, EAC411 Snap-in Mount EAC405, EAC451, EAC453, EAC455, EAC457 Recommended PC Board Layout EAC233, EAC333 Figure 10 Note: Center .07 inch diameter hole not used for 233, 234 Note: Unless otherwise specified, all dimension tolerances are .01" (+0.25 mm) DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 CONNECTORS & RECEPTACLES EAC RECEPTACLES (continued) 72 CONNECTORS & RECEPTACLES EAC RECEPTACLES PHONE: 773 792-2700 CONNECTORS & RECEPTACLES * Please visit the product pages on our website for the most up-to-date product information EAC RECEPTACLES (continued) SERIES EAC EAC227 EAC233S, EAC333S Note: Center PIN/Terminals not used on EAC233S EAC327 EAC311 EAC309, EAC315 Chassis/Panel Opening EAC233, EAC333 Recommended PC Board Layout (Component Side) Note: Center PIN/Terminals not used on EAC233 Note: Center .07 inch dia. hole not used on EAC233 Note: Unless otherwise specified, all dimension tolerances are .01" (+0.25 mm) DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery CONNECTORS & RECEPTACLES EAC RECEPTACLES FAX: 773 792-2129 73 * Please visit the product pages on our website for the most up-to-date product information CONNECTORS & RECEPTACLES EAC RECEPTACLES (continued) SERIES EAC EAC319, EAC327 EAC323 EAC325 EAC405 EAC409 EAC411 DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 74 CONNECTORS & RECEPTACLES EAC RECEPTACLES PHONE: 773 792-2700 CONNECTORS & RECEPTACLES * Please visit the product pages on our website for the most up-to-date product information EAC RECEPTACLES (continued) SERIES EAC EAC413 1.065 [27.05] 0.875 REF [22.23] 1.260 MAX [32.00] 1.220 .010 [30.99 .25] 1.079 .004 [27.41 .10] 0.955 .008 [24.26 .20] 0.157R [3.99] 0.079 [2.01] .005 0.940 +- .008 .12 23.88 +- .20 [ ] 0.640 .009 [16.26 .22] 0.779 .004 [19.79 .10] 0.079 [2.01] .078 x .157 [1.98 x 3.99] 0.276 [7.01] 0.276 [7.01] 0.760 [19.30] 0.032 [0.81] 0.281 [7.14] 1.130 MAX [28.70] 1.030 MAX [26.16] 0.160 [4.06] 0.806 .008 [20.47 .20] 0.656 [16.66] 0.610REF "E" [15.49] 0.490 [12.45] .008 0.120 +- .005 + .20 3.05 - .12 [ ] DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery CONNECTORS & RECEPTACLES EAC RECEPTACLES FAX: 773 792-2129 75 * Please visit the product pages on our website for the most up-to-date product information CONNECTORS & RECEPTACLES EAC RECEPTACLES (continued) SERIES EAC EAC451 RECOMMENDED P.C. BOARD LAYOUT DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 76 CONNECTORS & RECEPTACLES EAC RECEPTACLES PHONE: 773 792-2700 CONNECTORS & RECEPTACLES * Please visit the product pages on our website for the most up-to-date product information EAC RECEPTACLES (continued) SERIES EAC EAC453 EAC455 FAST-ON TERMINAL DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery CONNECTORS & RECEPTACLES EAC RECEPTACLES FAX: 773 792-2129 77 * Please visit the product pages on our website for the most up-to-date product information CONNECTORS & RECEPTACLES EAC RECEPTACLES (continued) SERIES EAC EAC457 DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 78 CONNECTORS & RECEPTACLES POWER INLET SOCKET PHONE: 773 792-2700 CONNECTORS & RECEPTACLES * Please visit the product pages on our website for the most up-to-date product information RAPC322 POWER INLET SOCKET Switchcraft introduces the RAPC322, an IEC320 inlet developed as a low power interconnect used in a variety of applications. The RAPC322 is molded from 94-VO rated material, is UL recognized, and meets a wide variety of approvals including CSA and VDE. The RAPC is rated at 2.5A at 250V. Applications for the RAPC322 include notebook computers, medical devices, and data communications products. FEATURES AND BENEFITS * Snap-in feet facilitate wave soldering * Top and side slots allow chassis to captivate connector * Conforms to EN 60320-1/2 APPLICATIONS * Appliance Inlet * Personal Computer * Data Communications * Medical Equipment * Test Equipment * Instrumentation SPECIFICATIONS GENERAL Current Rating: 5A, UL and CSA 2.5A, VDE and SEMKO Nominal Voltage: 250V Temperature Range: - 55C to 65C Dielectric Strength: 2000V @ 1 minute MATERIALS Housing: Black, molded thermoplastic, UL 94V-0 Male Pins: Copper alloy, nickel plated PC Terminals: Copper alloy, tin plated DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACKS AND PLUGS JACK SCHEMATICS FAX: 773 792-2129 79 * Please visit the product pages on our website for the most up-to-date product information JACK SCHEMATICS Military Identification: Military specifications covering phone jacks use a special code to describe jack functions. Jack schematic descriptions are coded J-1 through J-13 (as appropriate) to coincide with Federal Item Identification Guides for Supply Cataloging. One or more groups of suffix numbers/letters identify isolated switching circuits used. Suffixes identify the switching by industry recognized notation, i.e., 1-A, 1-B, 1-C, 1-D, etc. See chart below. Notation Meaning 1-A One, SPST switching circuit. Also known as NO (normally open) or "make" circuit. 1-B One, SPST switching circuit. Also known as NC (normally closed) or "break" circuit. 1-C One, SPDT switching circuit. Also known as transfer or "break" before "make" circuit. 1-D One, SPDT switching circuit. Also known as "make" before "break" circuit. NOTE: Number indicates the quantity of circuit - 2-A means 2, A circuits. Terminals locations shown on jack schematics do not necessarily coincide with physical locations on jacks. Not all circuit types available on all jacks. Single open circuit. (J1.) Single closed circuit, sleeve common. (J3). Single closed circuit. (J4). Double open circuit. (J2). Single open circuit. Isolated switching "make" circuit. (J1-1-A). Transfer circuit. (J5). Tip closed, ring open. (J10). Tip closed, ring open (common to sleeve). (J6). Single open circuit. Isolated switching "break" circuit. (J1-1B). Double closed circuit, ring common to sleeve. (J13). Single closed. Isolated switching "make" circuit. (J4-1A). Double closed circuit. (J7). Single closed circuit. Isolated switching transfer circuit. (J4-1C). Double closed circuit. Isolated switching "break" circuit. (J7-1B). Double open circuit. Isolated switching transfer circuit. (J2-1C). Double open circuit. Isolated switching- separate "break" and make circuits (J2-1A-1B). Single closed circuit Isolated switching "break" circuit. (J4-1B). Single closed circuit- "make" before "break". (J8). Single open circuit. Isolated switching transfer circuit. (J1-1C). Double open circuit. Isolated switching "make" circuit. (J2-1A). Double open circuit. Isolated switching- separate "make" circuits on both tip and ring. (J2-2A). Double closed circuit. Isolated switching "make" circuit on ring spring. (J7-1A). Single closed circuit plus "make" before "break". Isolated switching-"make" before "break" circuit. (J8-1D). Single open circuit. Isolated switching- separate transfer and "make" circuits. (J1-1A-1C). Single closed circuit. Isolated switching "break" circuit. Sleeve common to isolated switching circuit throw. (J4-1B). DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 JACKS AND PLUGS Circuit Types: Jacks normally have through circuits, shunt circuits, and/or isolated switching circuits, either individually or in various combinations. The chart below shows schematics of 39 common jacks - many more combinations are possible, but these are the most commonly used. A basic description of the switching action of each jack accompanies each schematic. 80 JACKS AND PLUGS JACK SCHEMATICS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information JACKS AND PLUGS JACK SCHEMATICS Single closed circuit. Isolated switching- "make" before "break" circuit. (J4-1D). Tip closed; ring open circuits. Isolated switching-two "make" circuits and one "break" circuit. (J10-2A-1B). Single open (tip) circuit and single closed (ring) circuit. (J9). Double jack, 2-conductors on each side. Tip circuits cross shunted; common sleeve. (J12). Single open circuit- "make" before "break". (J11). Tip closed; ring closed circuits. Isolated switching-"break" before "make" circuit. Double closed circuit. Separate sleeve "break" circuit. Single closed circuit. Isolated switching- Two "make" circuits. Single open circuit. Isolated switching- Two "make" circuits. Double open circuit. Isolated switching- One "make" and one "break" circuit. Double closed circuit. Isolated switching- One "make" and one "break" circuit. Tip closed; ring open circuits. Isolated switching-One "make" circuit. Double closed circuit. Isolated switching- Two "make" circuits. Double open circuit. Isolated switching- "break" before "make" circuit. WIRE-WRAPPING TERMINATIONS Switchcraft can build complete Jack Panel Assemblies with jacks, lamp jacks and switches with wire-wrapping terminals. If desired, components with solder lugs and wire-wrapping terminals can be installed in the same assembly. WIRE-WRAPPING TERMINAL DESIGN Jack springs with integral wire-wrapping terminals are made of special copper alloy for maximum work-life with excellent resistance to corrosion. Shank of terminal accommodates a maximum of three wire connections. Tini-Telephone (R) phone jacks, lamp jacks and switches with wire-wrapping terminals have slightly higher stack due to greater spacing required for wrapping tool access. Actuator springs and ground lug terminals are .704" long by .060" wide. WIRE-WRAPPING CONNECTIONS Use the chart below as a guide to recommended tools to be used with varying terminal thickness and wire gauges. Terminal Thickness (Inches) .020 thru .032 .016 .016 thru .032 Wire Gauge 22 & 24 24 26 Recommended Wire-Wrapping Tool (Gardner-Denver Co. Part Numbers) Use with 14B1-A Wrapping Tool Wrapping Bit Sleeve 500131 18840 500131 18840 37006 17611-2 SPECIFYING NOTE: Due to assembly variations containing components (solder lugs, wire-wrapping terminals, or both), these Jack Panel Assemblies are available on special order only. Contact Switchcraft. JACK MATING DATA NOTE: See tables for jack/plug mating data DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACKS AND PLUGS LONG FRAME TELEPHONE JACKS FAX: 773 792-2129 81 * Please visit the product pages on our website for the most up-to-date product information 1/4" LONG FRAME TELEPHONE JACKS JACK MATERIALS FRAMES - Jack frames are heavy steel, formed and press welded for added strength. Side member adds to frame rigidity and resistance to shock and vibration. Both "A" and "C" type frames can be supplied. (See next page.) SPRINGS - A special copper alloy is used for leaf springs because it offers excellent mechanical and electrical characteristics, and good corrosion resistance. The spring alloy has special hardness and ductility, and springs are produced from custom-designed dies. Although normally adjusted to mate with telephone (and MIL-type) plugs, springs can be adjusted to mate with commercial phone plugs. BUSHINGS - Bushings are copper alloy (except insulated jacks), drilled to accept either a standard (.250" diameter finger) plug or a popular smaller (.206" diameter finger) plug. Series M Hi-D Jax(R) have a threaded brass bushing, or a molded thermoplastic bushing for insulated mounting. CONTACTS - Jack design includes "wiping" action of contacts for low resistance connections. The contacts supplied depend on the jack selected. Gold or silver plating is normally offered as an option on tip, ring and/or sleeve springs. Several precious metals and shapes are used on jacks. SOLDER LUGS TERMINALS - Lugs project out directly from rear of jack and are solder-coated for easy wiring and soldering. Offset lugs can be supplied on special order (except standard on MT-Jax (R) ). Jacks with offset ground lugs are par ticularly suitable for bussing connections on jack panels. Contact Switchcraft for special order lug requirements. STRAIGHT SOLDER LUGS OFFSET SOLDER LUGS WIRE-WRAPPING TERMINALS - Wire-wrapping eliminates the need for soldering. Each terminal accepts up to three wrapped wires (22 or 24 gauge, 5 wraps each), applied with standard wire-wrapping tools. Terminal base has standoff shoulder which prevents first wrapped wire from accidentally sliding down and shorting against another terminal or adjacent spring. Terminal tips are radiused to facilitate positioning of wire-wrapping tool over terminals. See page 80 for wire-wrapping data. WIRE-WRAPPING TERMINALS PRINTED CIRCUIT TERMINALS - Components can be supplied with printed circuit terminals on special order. Terminals can be specified in various lengths to accommodate different thicknesses of single and double sided boards, as well as multilayers, and flat flexible cable and circuitry. PRINTED CIRCUIT TERMINALS (SPECIAL) Material Palladium Fine silver Gold alloy Crossbar Fine silver (Large) Gold or Silver Shape Welded Crossbar Riveted, button-type Welded switching. Riveted, button-type Plating Description Best overall combination of life, current carrying, and resistance to environment. Also known as WEco #2. Carries higher current than palladium. Recommended for dry circuit Excellent resistance to corrosion and contamination. Also known as WEco #1. Heavy currents. OTHER TERMINALS - Many other special terminal styles are possible. For example, where mounting permits, jacks can be supplied with stacks having right-angle terminals. Contact Switchcraft for special terminals. CUSTOM COMPONENTS Only the most popular types of jacks are listed. For lower contact resistance (used on through circuit springs). DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 JACKS AND PLUGS The complete Switchcraft line of standard size panels, jacks, plugs, switches and accessories are rugged, premium quality devices...hand-crafted by experts...100% inspected... and carefully adjusted to meet the traditionally high quality demands of the telephone industry and the military. Tightly controlled incoming inspection, manufacturing methods, and QC procedures assure you of long-life, reliable components. Typical applications where Switchcraft components have been specified for more than five decades are: telephone central office equipment, switchboards, jackfields, test and patch panels, and station equipment; TV and radio broadcasting consoles; PA and communication consoles; telegraph systems and apparatus; multichannel video and audio patching; and data processing equipment, such as computers, telemetry, I/O devices and facsimile. 82 JACKS AND PLUGS LONG FRAME TELEPHONE JACKS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information LONG FRAME TELEPHONE JACKS JACKS AND PLUGS MT-Jax(R) ("A" Frame) MT-Jax(R) ("C" Frame) XMT-Jax(R), Number XMT-332A MT-Jax(R) jacks Numbers MT-342B and MT-344B have shorter bushings, 0.5" long with a hold inside diameter of .21". They will mate with MIL plug M642/5-1 or M642/8-1. M642/5-1 plug (Switchcraft 480) cannot be used with MT-342B or MT-344B if these jacks are mounted on standard .625" thick panels. The short jack bushings are recessed .125", and the M642/5-1 is too wide to fit in the panel recess. Use plug M642/8-1 (Switchcraft 484) with a narrower diameter to fit in the recess and mate properly. CONTACTS - Contacts on shuts and isolated switching circuits are welded crossbar palladium. Welded crossbar gold alloy contacts (WEco #1) are available on special order for dry circuit applications. SPECIFICATIONS WMT-Jax(R), Number WMT-332B YMT-Jax(R), Number YMT-332B Details of Typical Buss Wiring of Jacks with Offset Ground Lugs Ground Lug "Toward" Frame (Y Offset) MECHANICAL Life: Commercial jacks: 10,000 insertion/withdrawal cycles, minimum. Military Jacks: 20,000 insertion/withdrawal cycles, minimum. Mechanical Shock: Military Jacks - Per MIL-STD-202, method 213, Test Condition H (75g). Vibration: Military Jacks - Per MIL-STD-202, method 213, (10-55 Hz). Buss Wire Between Rows Ground Lug "Toward" Frame Frame and Stack Screws: Plated steel, with iridescent iridite finish. Springs: Copper alloy, spring tempered. Solder lugs are tinned. Bushings: Plated copper alloy standard. Natural brass finish optional. Insulation: Rigid plastic spacers (MIL-type PBE-P per Specification LP-513). One piece molded through stack. Contacts: Welded crossbar palladium contacts in shunt and isolated switching circuits are standard. Gold alloy (WEco #1) and fine silver are available on special order. Ground Lug "Away" from Frame (X Offset) Buss Wire Outside of Rows Long frame jacks are designed especially for high quality communication equipment, and to meet exacting MIL specifications, as well as telephone and communication systems. Many jacks have WEco equivalent types. MT-Jax(R) phone jacks are offered in four styles: MT-Jax(R), WMT-Jax(R), XMT-Jax(R) and YMT-Jax(R). Rugged steel frames are produced in specially designed dies, press welded to provide rigidity and dimensional stability required by telephone and communication jack panels - and to meet MIL frame strength tests. "A" and "C" frame styles are available. TERMINALS - Solder Lug: All MT-Jax(R) have solder lug terminals. Wire-Wrapping Terminals: WMT-Jax(R) have wire-wrapping terminals. Offset Ground Lugs: XMT-Jax(R) and YMT-Jax(R) have ground lugs, which simplify production line wiring time. A single row of jacks can be installed with a single buss wire connected to all ground lugs in a row, or when double rows are mounted on .625" vertical centers with lugs oriented between rows, holes in ground lugs line up so a single buss wire provides connections for both rows. XMT-Jax(R) have ground lugs oriented away and YMT-Jax(R) are oriented toward jack frame. See illustration. MIL STANDARDIZATION - MIL jack types listed have been adjusted for use with plugs specified in Amendment No.1, MIL-P-642, usually M642/1-1, M642/1-2, M642/2-1, M642/2-2, M642/4-1 or M642/4-2. When applicable, specify the plug you will use; we will adjust with that plug where the item is not a MIL-type. NOTE: ELECTRICAL Contact Resistance: Commercial Jacks - .030 ohms maximum (initial), .050 ohms maximum (after humidity, durability exposure). Military Jacks - .010 ohms maximum (initial), .020 ohms maximum (after life), .10 ohms maximum (after salt spray). Insulation Resistance: Commercial Jacks - 10,000 M minimum (initial), 1,000 M minimum (after humidity). Military Jacks - 10,000 M minimum (initial), 1,000 M minimum (after humidity, durability exposure). Dielectric Withstanding Voltage: 500 V, 60 Hz (rms) AC. ENVIRONMENTAL Thermal Range: Commercial Jacks - -55C to +85C (non-operating); -20C to +65C (operating). Military Jacks -55C to +85C (non operating); -40C to +65C (operating). Thermal Shock: Commercial Jacks - Per MIL-STD-202, method 107. Military Jacks - Per MIL-STD-202, method 107. Humidity: Commercial Jacks - Per MIL-STD-202, method 106. Military Jacks - 0% to 95% operating and non-operating. Salt Spray: Commercial Jacks - Per MIL-STD-202, method 101. Military Jacks - Per MIL-STD-202, method 101 (48 hours). Moisture Resistance: Military Jacks - Per MIL-STD-202, method 106 (240 hours). ORDERING - Order jacks by part number. Additional variations in jacks are available on special order. Special circuitry, frames, contacts, natural brass bushings, as other terminals are available. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACKS AND PLUGS LONG FRAME TELEPHONE JACKS FAX: 773 792-2129 83 * Please visit the product pages on our website for the most up-to-date product information 1/4" LONG FRAME TELEPHONE JACKS (R) MT-JAX (with WEco Equivalent Jacks) 2 WEco Equiv. MIL Type1 Schematic Circuit* Dim. "X" maximum Inch (mm) Mating Plug3 Switchcraft Part Number WEco Equiv. MT332B CMT332B WMT332B WCMT332B MT333B MT334B CMT334-B WMT334B WCMT334B MT336 CMT336 WMT33610 WCMT336 MT336A10 CMT336A WMT336A WCMT336A MT336B10 CMT336B MT336C10 CMT336C WMT336C10 WCMT336C MT336D10 CMT336D WMT336D10 WCMT336D MT338 CMT338 MT33910 CMT339 MT342B 238A 238C 238AM 238CM 300A 239A 239C 239AM 239CM 241A 241C 241AM 241CM 242A 242C 242AM 242CM 285A 285C 240A 240C 240AM 240CM 280A 280C 280AM 280CM 267A 267C 284A6 384C6 246A 2-CONDUCTOR 2 MT331 CMT331 WMT331 WCMT331 MT332 CMT332 MT332A CMT332A MT332C MT333 CMT333 MT333E CMT333A MT334A CMT334A MT334C CMT334C MT334E CMT334E MT334F CMT334F MT335 CMT335 MT336E10 CMT336E MT33710 CMT337 CMT351C MT352A CMT354F 233A, 221E3 223C 223AM 223CM 232A, 544A4 232C 218A 218C 303A 215A 215C 237A 237C 225A, 234A 225C, 234C 216A 216C, 484C5 217A 217C 226A 226C 236A 236C 438A 438C 411A 411C 394C 218J 361C M641/2-8 - - - I I I I .438 (11.1) .438 (11.1) .438 (11.1) .438 (11.1) - - M641/2-3 - M641/2-1 M641/2-6 - - - II II III III XVIII V V IX IX .5 (12.7) .5 (12.7) .5 (12.7) .5 (12.7) .562 (14.3) .469 (11.9) .469 (11.9) .625 (15.9) .625 (15.9) XI .562 (14.3) - M641/2-5 XI XVII .562 (14.3) .625 (15.9) - M641/2-7 - M641/2-4 - - - - M641/1-2 M641/2-9 M641/1-1 - - - XVII XXV XXV XIX XIX XIII XIII XXIII XXIII XXIV XXIV XXXIII III XXXIV .625 (15.9) .562 (14.3) .562 (14.3) .562 (14.3) .562 (14.3) .562 (14.3) .562 (14.3) .75 (19.0) .75 (19.0) .75 (19.0) .75 (19.0) .812 (20.6) .5 (12.7) .75 (19.0) - M642/4-1 M642/4-2 or M642/4-3 *Refer to page 79 and 80 for schematics. Special order only; contact Switchcraft. 1. Many jacks are offered with MIL specifications. Other jacks are made of MIL-spec materials but do not have MIL approval because no MIL type numbers have been assigned. 2. MT-Jax have nickel-plated copper alloy bushing. WEco equivalent jacks have plain copper alloy bushings (except WEco Number 221E, which has nickel-plated copper alloy bushing). 3. Mating plugs and patch cords are contained in the catalog. 4. Adjust non-short tip-ring. 5. Adjusted for plug M642/1-1 or M642/1-2. 6. Actuates differently (insulated "A" off ring instead of tip). 7. Same as MIL type M641/2-3 except with offset ground lug. 8. Same as MIL type M641/3-1 except with offset ground lug. 9. Same as MIL type M641/3-2 except with offset ground lug. 10. When mounted on "A" frames, stacks are too high to fit in standard panels with .625" horizontal space add prefix "C" to part number to order jacks with "C" frame. MIL Type1 Schematic Circuit* 3-CONDUCTOR M641/3-1 IV - IV - IV - IV - VII M641/3-2 XII - XII - XII - XII M641/3-4 XX - XX - XX - XX M641/5-5 XIV - XIV - XIV - XIV M641/3-6 XXI - XXI M641/3-3 XXII - XXII - XXII - XXII - XXXI - XXXI - XXXI - XXXI - XXXII - XXXII M641/3-7 XXVII - XXVII - IV Dim. "X" maximum Inch (mm) .562 (14.3) .562 (14.3) .562(14.3) .562 (14.3) .562 (14.3) .562 (14.3) .562 (14.3) .578 (14.7) .578 (14.7) .562 (14.3) .562 (14.3) .625 (15.9) .625 (15.9) .688 (17.5) .688 17.5) .75 (19.0) .75 (19.0) .812 (20.6) .812 (20.6) .688 (17.5) .688 (17.5) .75 (19.0) .75 (19.0) .75 (19.0) .75 (19.0) .938 (23.8) .938 (23.8) .562 (14.3) .562 (14.3) .967 (24.6) .967 (24.6) .563 (14.3) Mating Plug3 M642/2-1 or M642/2-2 M642/5-1 MT-JAX (WITH WECO EQUIVALENT JACKS) 2 Switchcraft Part Number WEco Equiv. WMT342B MT344B MT346 CMT346 MT354B MT35510 MT356C10 CMT356C MT35710 CMT358 CMT359 246 AM 248A 249A 249C 248E 243C 245A 245C 363A 290C 326C DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 MIL Type1 Schematic Circuit* 3-CONDUCTOR 2 - IV - XII - XX - XX - XII - XXXV - XXXVI - XXXVI - XXXVII - XXXVIII - XXXIX Dim. "X" maximum Inch (mm) Mating Plug3 .562 (14.3) .625 (15.9) M642/5-1 .562 (14.3) .562 (14.3) .625 (15.9) .812 (20.6)10 .938 (23.8)10 M642/5-1 or .938 (23.8) M642/2-2 .75 (19.0)10 .875 (22.2) .75 (19.0) JACKS AND PLUGS Switchcraft Part Number 84 JACKS AND PLUGS LONG FRAME TELEPHONE JACKS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information MT-JAX (R) MT-JAX(R) (Industry Standard - No WEco Equivalent) JACKS AND PLUGS Switchcraft Part Number WMT332A WCMT332A XMT332A YMT332A CMT332C WMT332C WMT333 WCMT333 MT333A WMT333E WMT334A WMT334C WMT334E WMT334F WMT33510 WCMT335 MT335A10 CMT335A WMT335A WCMT335A WMT336E10 WCMT336E CMT341 MIL Type 1 Schematic Circuit* 2-CONDUCTOR2 - III - III - III - III - XVIII - XVIII - V - V - VI - IX - XI - XVII - XXV - XIX - XIII - XIII M641/2-2 XXVI - XXVI - XXVI - XXVI - XXIII - XXIII - I Dim. "X" maximum Inch (mm) .5 (12.7) .5 (12.7) .5 (12.7) .5 (12.7) .562 (14.3) .5 (12.7) .469 (11.9) .469 (11.9) .967 (24.6) .625 (15.9) .562 (14.3) .562 (14.3) .562 (14.3) .641 (16.3) .688 (17.5) .688 (17.5) .75 (19.0) .75 (19.0) .75 (19.0) .75 (19.0) .875 (22.2) .875 (22.2) .438 (11.1) (Industry Standard - No WEco Equivalent) Mating Plug 3 M642/4-1 M642/4-2 or M642/4-3 Switchcraft Part Number MIL Type 1 XMT332B YMT332B CMT333B WMT333B XMT334B YMT334B10 WMT336B WCMT336B MT343B CMT342B CMT344B WMT344B MT346A10 MT346B10 MT346C10 CMT346C - - - - - - - - - - - - - - - - Schematic Circuit* 3-CONDUCTOR2 IV IV VII VII XII XII XXI XXI VII IV XII XII XIV XXI XXII XXII Dim. "X" maximum Inch (mm) .562 (14.3) .562 (14.3) .562 (14.3) .562 (14.3) .562 (14.3) .562 (14.3) .812 (20.6) .812 (20.6) .5 (12.7) .562 (14.3) .625 (15.9) .625 (15.9) .688 (17.5) .812 (20.6) .688 (17.5) .688 (17.5) Mating Plug 3 M642/2-1 or M642/2-2 M642/5-1 M642/5-1 or M642/2-21 *Refer to pages 79 and 80. Special order only; contact Switchcraft. 1. Many jacks are offered with MIL specifications. Other jacks are made of MIL-spec materials but do not have MIL approval because no MIL type numbers have been assigned. 2. MT-Jax have nickel plated copper alloy bushing. WEco equiv. jacks have plain copper alloy bushings (except WEco No. 221E, which has nickel plated copper alloy bushing). 3. Mating plugs and patch cords are contained in this catalog. 7. Same as MIL type M641/2-3 except with offset ground lug. 8. Same as MIL type M641/3-1 except with offset ground lug. 9. Same as MIL type M641/3-2 except with offset ground lug. 10. When mounted on "A" frames, stacks are too high to fit in standard panes with .625" horizontal space add prefix "C" to part number to order jacks with "C" frame. MT-Jax(R), Offset Lugs MT-Jax(R) and WMT-Jax(R) MT-Jax(R),Wire-Wrapping Detail DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACKS AND PLUGS LONG FRAME TELEPHONE TWIN JACKS FAX: 773 792-2129 85 * Please visit the product pages on our website for the most up-to-date product information 1/4" LONG FRAME TELEPHONE TWIN JACKS SPECIFICATIONS MT388 ORDERING Order by part number from table. WMT389 Part Number1 MT388 WMT388 MT389 High quality telephone jacks are essentially doubled versions of MT-Jax(R). Twin-Jax(R) are used in Switchcraft Series 2400, 2600 and JP(R) Jack Panels and other standard jack panels. Twin-Jax(R) have direct WEco equivalents. MT388 AND WMT388 Frame mounting ears are on 1.375" centers, and bushings are on .625" centers. Jacks are double, 2-conductor type with a crossover wiring feature. If a mating plug is inserted in either bushing, crossover contacts are opened (see schematic). MT388 (solder lugs) is equivalent to WEco jack 410A, 410C and 410D. WMT388 (wire-wrapping) is equivalent to WEco 410AM. WMT389 Adjusted for Plug WEco types 298B and 347B MIL types M642/9-1 and M642/1-1 Switchcraft types 411, 412, 413, 420 WEco type 310 MIL types M642/2-1 and M642/2-2 Switchcraft types 414 and 482 Dim. "X" max. Inch (mm) .562 (14.3) .562 (14.3) .594 (15.1) .562 (14.3) Special Order only; contact Switchcraft. 1. Number MT388 is equivalent to MIL-type M641/11-1 2. Complete data for telephone and MIL-type plugs are contained in this section. Mounting Screws: #6-32, Part Number P10725, can be ordered separately. Contact Switchcraft. (Screws not supplied with jacks). SCHEMATIC CIRCUITS MT389 AND WMT389 Double, 3-conductor jacks with both the tip and ring circuits interconnected (crossover wired) so if a plug is inserted in either jack, common circuits are opened (see schematic). MT-389 (solder lugs) is equivalent to WEco 482A. WMT389 (wire-wrapping) is equivalent to WEco 482AM and 482BM. MT388 and WMT388 MT389 and WMT389 MT389 and WMT389 MT388 and WMT388 DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 JACKS AND PLUGS MT389 Frame and Stack Screws: Steel, plated with iridescent iridite finish. Springs: Copper alloy, spring tempered. Solder lugs are solder coated. Bushings: Nickel-plated copper alloy. Contacts: Welded crossbar palladium in shunt circuits. Insulation: Rigid plastic (MIL-type PBE-P, per MIL Specification LP-513C). Extruded plastic insulating tubing through stack. 86 JACKS AND PLUGS JACK BLOCKS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information 1/4" JACK BLOCKS JACKS AND PLUGS DUAL-JAX BLOCK(R) ORDERING Order by part number from table. Part Number 2300 2331 2332A 2332B 2333 Dual-Jax Blocks are ideal where limited jack connections are needed but larger jack panels are not required. Designed for broadcasting, intercom and PA systems, switchboards, and commercial, industrial and military communications equipment. Dual-Jax Blocks mount in panels or chassis, either singularly or in multiples. Four countersunk holes accommodate four #8-32 screws (not supplied) for block mounting. Blocks can be supplied without jacks, or with MT-Jax(R) installed. Many other jacks including, T-Jax(R), T-Switch(R) switches and lamp jacks can be installed. Jacks with wire-wrapping terminals or offset lugs can also be supplied. By drilling additional holes, Twin-Jax(R) may also be used. Contact Switchcraft for any special order items. Special order only; contact Switchcraft for price and delivery. Mounting Screws: #6-20, P1544, can be ordered separately, contact Switchcraft. SPECIFICATIONS SERIES 2300 Block: Molded black thermoplastic. Screws: #6-20 plated steel, QQ-P-416, Type II, Class 2 (for jack mounting). DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Description Block, without jacks. Two, MT331 MT-Jax installed. Two, MT332A MT-Jax installed. Two, MT332B MT-Jax installed. Two, MT333 MT-Jax installed. Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACKS AND PLUGS BANTAM TYPE (R) JACKS FAX: 773 792-2129 87 * Please visit the product pages on our website for the most up-to-date product information TT-JAX (R) (.173") TELEPHONE JACKS BANTAM TYPE(R) TT32BDC DIE-CAST FRAME TT36FM FRONT MOUNT (special order only) SWITCHCRAFT VS. MIL NUMBERS FEATURES * Steel (standard) or die-cast frames (special order). * 2-or 3-conductors. * Palladium crossbar welded contacts are standard in switching circuits. Fine silver or gold alloy contacts are available on special order. * Series TT30, TT30FM and TT600 - solder lugs; Series WTT-30, WTT30FM and WTT600FM -wire-wrapping terminals. Bussing solder lugs are available on special order. * Series TT30 and WTT30 jacks mounts in Series 1600, A1600, B1600 and C1600 jacks panels. * Series TT30FM and WTT30FM jacks mount in Series TT51, TT52, TT55 and TT56 jack panels. * Series TT600 and WTT600 jacks mount in .25" diameter holes in panels up to .281" thick. Mounting centers: .438". * Add "N" for nickel-plated frame and "Y" or for offset solder lugs. Jack Number MIL Spec. Number TT32B 641/19-2 TT32BFM 641/19-6 TT34B 641/19-4 TT34BFM 641/19-8 TT36C 641/19-10 WTT32B 641/19-1 WTT32BFM 641/19-5 WTT34B 641/19-3 WTT34BFM 641/19-7 WTT36C 641/19-9 Part Numbers, Jack with Solder Lugs Dim. "X" Series TT30 Series TT30FM Series TT600 Max. Steel Die Cast Steel Die Cast Steel Schem.1 In (mm)2 Cond. TT31 TT31DC TT31FM TT31FMDC TT631 I .422 (10.7) 2 TT32A TT32ADC TT32AFM TT32AFMDC TT632A III .406 (10.3) 2 TT32B TT32BDC TT32BFM TT32BFMDC TT632B IV .578 (14.68) 3 TT32C TT32CDC TT32CFM TT32CFMDC TT632C XVIII .422 (10.7) 2 TT33 TT33DC TT33FM TT33FMDC TT633 V .578 (14.7) 2 TT33B TT33BDC TT33BFM TT33BFMDC TT633B VII .484 (12.3) 3 TT34A TT34ADC TT34AFM TT34AFMDC TT634A XI .547 (13.9) 2 TT34B TT34BDC TT34BFM TT34BFMDC TT634B XII .578 (14.68) 3 TT34C TT34CDC TT34CFM TT34CFMDC TT634C XVII .547 (13.9) 2 TT34F TT34FDC - - - XIX .609 (15.5) 2 TT35 TT35DC TT35FM TT35FMDC TT635 XIII .609 (15.5) 2 TT36 TT36DC TT36FM TT36FMDC TT636 XX .609 (15.5) 3 TT36A TT36ADC TT36AFM TT36AFMDC TT636A XIV .625 (15.9) 3 TT36B TT36BDC - - - XXI .703 (17.9) 3 TT36C TT36CDC TT36CFM TT36CFMDC TT636C XXII .625 (15.9) 3 Typical Mating Plug3 TT251 TT251 TT253 TT251 TT251 TT253 TT251 TT253 TT251 TT251 TT251 TT253 TT253 TT253 TT253 Part Numbers, Jack with Wire Wrapping Terminals Dim. "X" Typical Series WTT30 Series WTT30FM Series WTT600 Max. Mating Steel Die Cast Steel Die Cast Steel Schem.1 In (mm)2 Cond. Plug3 WTT31 WTT32A WTT32B WTT32C WTT33 WTT33B WTT34A WTT34B - WTT35 WTT36 WTT36A WTT36C WTT31DC WTT32ADC WTT32BDC WTT32CDC WTT33DC WTT33BDC WTT34ADC WTT34BDC - WTT35DC WTT36DC WTT36ADC WTT36CDC WTT31FM WTT32AFM WTT32BFM WTT32CFM WTT33FM WTT33BFM WTT34AFM WTT34BFM - WTT35FM WTT36FM WTT36AFM WTT36CFM WTT31FMDC WTT32AFMDC WTT32BFMDC WTT32CFMDC WTT33FMDC WTT33BFMDC WTT34AFMDC WTT34BFMDC - WTT35FMDC WTT36FMDC WTT36AFMDC WTT36CFMDC WTT631 WTT632A WTT632B WTT632C WTT633 WTT633B WTT634A WTT634B WTT634C WTT635 WTT636 WTT636A WTT636C WTT636C THREADED BUSHING I III IV XVIII V VII XI XII XVII XIII XX XIV XXII .422 (10.7) .406 (10.3) .578 (14.68) .422 (10.7) .578 (14.7) .484 (12.3) .547 (13.9) .578 (14.68) .547 (13.9) .609 (15.5) .609 (15.5) .625 (15.9) .625 (15.9) Special order only. 1. See schematic diagrams. 2. "X" dimension of die cast frame jacks may be slightly greater. 3. See Mating Plugs Section. DIMENSIONS ARE FOR REFERENCE ONLY 2 2 3 2 2 3 2 3 2 2 3 3 3 Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 TT251 TT251 TT253 TT251 TT251 TT253 TT251 TT253 TT251 TT251 TT253 TT253 TT253 JACKS AND PLUGS TT36 STEEL FRAME 88 JACKS AND PLUGS BANTAM TYPE (R) JACKS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information (R) (R) JACKS AND PLUGS TT-JAX (.173") TELEPHONE JACKS BANTAM TYPE SPECIFICATIONS MOUNTING HARDWARE Frame: Plated (steel or zinc diecast). Stack Screws: Steel plated. Bushing: Plated (brass or steel). Tip and Ring Springs: Copper alloy. Contact Spring: Copper alloy. Contacts: Welded crossbar palladium. Other alloys in various sizes available on special order. Insulation: Rigid plastic with plastic tubing through stack assembly. Series TT30: #3-48 x 1/4"; mounting screws, P10834, can be ordered separately. Series TT30FM: Supplied with one #3-48 x 14" fil. head machine screw, steel-plated. Series TT600: Supplied with one P1975, nickel-plated copper alloy locknut, and one S3997, steel, nickel-plated washer. NOTE: Dimensional drawings show panels with steel frame jacks. Overall dimensions for steel or die-cast frame jacks are the same, except as noted. 0.375 [9.5] REF B0.115 [2.9] REF 0.281 [7.1] REF 0.250 [6.4] REF B0.251 [6.4] REF 2-17/32 [64.3] REF 0.780 5.015 [19.8] REF 0.590 5.015 [14.9] REF 0.650 [16.51] REF 0.035 [.79] REF 0.279 [7.1] REF B0.176 [4.46] REF Series TT32B DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACKS AND PLUGS BANTAM TYPE (R) JACKS FAX: 773 792-2129 89 * Please visit the product pages on our website for the most up-to-date product information (R) (R) TT-JAX (.173") TELEPHONE TWIN JACKS BANTAM TYPE SPECIFICATIONS * Steel or die-cast frames. (Special order only). * Twin, 3-conductor jacks on .312" centers, inter-connected so circuit is opened when a mating plug is inserted in one side of the jack. Palladium welded crossbar contacts are standard in switching circuits. * Solder lugs or wire-wrapping terminals. * TT89, TT89C, WTT89 and WTT89DC jacks mount in Series 1700 jack panels. * TT89FM, TT89FMDC, WTT89FM and WTT89FMDC jacks mount in Series TT59, TT60, TT61 and TT62 jack panels. Frame: Plated (steel or diecast zinc). Stack Screws: Steel-plated. Bushing: Plated (steel or copper alloy). Tip, Ring and Contact Springs: Copper alloy. Contacts: Welded crossbar palladium. Other alloys in various sizes available on special order. Insulation: Rigid plastic with plastic tubing through stack assembly. Mounting Hardware: #3-48 x 1/4" mounting screws, P10834, can be ordered separately for TT89, TT89DC, WTT89 and WTT89DC jacks. Two mounting screws, P25424, are supplied with TT89FM, TT89MDC, WTTFM and WTT89FMDC jacks. NOTE: Dimensional drawings show panels with steel frame jacks. Overall dimensions for steel or die-cast frame jacks are the same. TT89 SCHEMATIC Solder Lugs Steel TT89 TT89FM Die Cast TT89DC TT89FMDC Wire-Wrapping Terminals Steel Die Cast WTT89 WTT89DC WTT89FM WTT89FMDC 1. See Mating Plugs Section. Special order only DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 Conductors Twin 3-conductor Typical Mating Plug1 TT263 TT263 JACKS AND PLUGS FEATURES 90 JACKS AND PLUGS BANTAM TYPE(R) JACKS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information TT-JAX(R) (.173") TELEPHONE TRIPLE JACKS BANTAM TYPE(R) JACKS AND PLUGS FEATURES * Steel or die-cast frames. * TT95 Tri-Jax(R) Jacks: three, 3-conductor jacks on one frame. Twin jacks, (on .312" centers, LINE & EQUIPMENT functions), have strapped shunts installed. The third jack (MONITOR) is unwired. See TT95 schematic. * TT96 Tri-Jax Jacks: Same as TT95 jacks, except third jack (MONITOR) has tip and ring springs, respectively, jumpered to tip and ring springs of top (LINE) jack. * Selection of solder lugs or wire-wrapping terminals. * Palladium welded crossbar contact are standard in switching circuits. * TT95, TT95DC, WTT95 and WTT95DC jacks mount in Series B1700 jack panels. * TT95FM, TT95FMDC, TT96FM, TT96FMDC and wire-wrapping versions mount in Series TT53, TT54, TT57 and TT58 jack panels. TT95 SCHEMATIC TT96 SCHEMATIC TT95 TT95FM TT96FM TT95DC TT95FMDC TT96FMDC WTT95 WTT95FM WTT96FM WTT95DC WTT95FMDC WTT96FMDC TT253 TT263 Special order only SPECIFICATIONS Frame: Plated (steel or diecast) Stack Screws: Stainless Steel Plated. Bushings: Plated (steel or copper alloy). Contact Springs: Copper alloy. Contacts: Welded crossbar palladium. Other precious metal alloys in various sizes available on special order. Mounting Hardware: #3-48 x 1/4" mounting screws, P10834, can be ordered separately for rear mount jacks. Two mounting screws, P25424, are supplied with front mount jacks. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACKS AND PLUGS MINIATURE TELEPHONE JACKS FAX: 773 792-2129 91 * Please visit the product pages on our website for the most up-to-date product information MINIATURE TELEPHONE JACKS, RIGHT ANGLE, PC MOUNT RTT34B02 COVER P286302 JACKS AND PLUGS CLOSE-UP OF "Snap-In" TERMINAL RTT8702 COVER P286402 Right-angle miniature phone jacks provide low-profile packaging. Single and twin 3-conductor jacks provide plug-jack access to communication circuits for patching and/or testing. Tips and rings are shunted. These jacks mate with Switchcraft miniature TT(R) plugs and patch cords. Jacks are designed for right-angle mounting on .062" (1.6 mm) maximum thickness PC boards. Snap-on covers in colors are available and can be installed or removed in the field without special tools. Covers and jacks may be ordered in different colors for color coded circuits. SPECIFICATIONS ELECTRICAL Dielectric Withstanding Voltage: 500 V AC Contact Resistance: .020 maximum (initial), .030 maximum (after life test). Insulation Resistance: 1010 at 500 V DC (initial). MECHANICAL Shock: MIL-STD 202 Method 213. Vibration: MIL-STD 202 Method 201. Insertion Force: 7 pounds maximum (31.14 N). Withdrawal Force: 1.5 pounds minimum (6.67 N). Life: 10,000 cycles. MATERIALS Housing: Thermoplastic UL 94V-0. Springs: Copper alloy, plated. Contacts: Gold alloy (WEco #1) crossbar. ENVIRONMENTAL Temperature Limits: -55C to +85C (non-operating). Thermal Shock: MIL-STD 202 Method 107. Salt Spray: MIL-STD 202 Method 101. Humidity: MIL-STD 202 Method 106, less steps 7A and 7B. LOW SILHOUETTE PERMITS CRITICAL SPACE-SAVING HIGH DENSITY PACKAGING ORDERING INFORMATION Jack Part No. Cover Part No. Color P286301 Red RTT34B02 P286302 Black RTT34B04 P286304 Blue RTT34B05 P286305 White RTT34B07 P286307 Orange RTT34B08 P286308 Yellow RTT34B01 Schem. Cond. XII 3 Typical Mating Plug 2 TT-253 RTT8701 P286401 Red RTT8702 P286402 Black RTT8704 P286404 Blue Twin Twin RTT8705 P286405 White XII 3 RTT8707 P286407 Orange RTT8708 P286408 Yellow TT-263 1. See schematic diagrams on pages 79 and 80. 2. See Mating Plugs Section. Special order only; contact Switchcraft for price and delivery. ORDERING 1. Order jacks and covers separately from table. 2. Covers can be ordered assembled on special order. 3. To order RTT jack with cover installed, add the letter C after RTT in part number. Special order only. 4. To order RTT jack with Snap-in terminals, add the letter S to the end of the part number. Special order only. 5. For all special orders items, contact Switchcraft. RTT JACK PART NUMBERING SYSTEM Series RTT Right Angle TT Jack Cover Option Blank- No Cover Standard Circuitry C- 87- DIMENSIONS ARE FOR REFERENCE ONLY Cover Supplied Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 34B- Jack Color XII 01- Red Two XII Circuits 02- Black 04050708- Blue White Orange Yellow 92 JACKS AND PLUGS MINIATURE TELEPHONE JACKS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information JACKS AND PLUGS MINIATURE TELEPHONE JACKS, RIGHT ANGLE, PC MOUNT (continued) RECOMMENDED PCBOARD LAYOUT No. RTT34B (Less cover) No. P2863 Cover No. RTT87 (Less cover) RECOMMENDED PC BOARD LAYOUT No. P2864 Cover DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACKS AND PLUGS ENCLOSED JACKS FAX: 773 792-2129 93 * Please visit the product pages on our website for the most up-to-date product information .177" ENCLOSED JACKS Two- and 3-conductor Unijax(R) jacks have advanced features of Hi-D Jax(R) jacks including chassis/panel and PC mounting and .177" bushing that mates with a variety of tini-telephone(R) plugs and patchcords. Bushing diameter is .281" inside diameter; panel thickness is .125". Mounts in rows or arrays on .469" centers. UJ4B JACKS AND PLUGS SPECIFICATIONS MECHANICAL Insertion/Withdrawal: 2-conductor, 1.25 pounds nominal, 3 pounds maximum insertion. 3-conductor, 1.5 pounds nominal, 3 pounds maximum insertion. 2-conductor, 3 pounds nominal, 1.5 pounds minimum withdrawal. 3-conductor, 3 pound nominal, 1.5 pounds minimum withdrawal. Life: 10,000 insertion/withdrawal cycles minimum. ELECTRICAL Contact Resistance: .10 ohms maximum. Insulation Resistance: 1,000 M minimum. Dielectric Withstanding Voltage: 500 V AC maximum. MATERIAL Housing: Thermoplastic. Mounting Bushing: Nickel-plated copper alloy. Tip and Ring Springs: Copper alloy, silver-plated. Integral contacts. Shunt Springs: Copper alloy, silver-plated integral contacts. Sleeve Terminal: Steel, tin-plated. Hardware: Supplied with one, Number P2060 nickel-plated copper alloy locknut, and one, Number P2061 nickel-plated copper alloy washer. TWO CONDUCTOR PART NUMBERS Part Number Description Jack Schematic1 Typical Mating Plug2 UJ1 Open circuit I TT251 UJ2A Single closed circuit III TT251 THREE CONDUCTOR PART NUMBERS UJ2B Double Open circuit IV TT253 UJ4B Double closed circuit XII TT253 1. See jack schematics on pages 79 and 80. 2. See Mating Plugs Section. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 94 JACKS AND PLUGS LITTEL-JAX (R) 2- AND 3- CONDUCTOR PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information 1/4" PHONE JACKS PC-12A 14B JACKS AND PLUGS PREFIX OPTIONS Blank- 1/4" Commercial Jack CAccepts Mill Plug FA.205" Faston Terminals FAL.205" Faston Terminals and .375" Long Bushing L.375" Long Bushing PCPC Terminals SAccepts .206 Diameter Plugs SERIES 1-Littel Jax(R) CIRCUITRY 1I 2A- III 2B- IV 3V 3A3B3E4B- VI VII IX XII TWO CONDUCTOR PART NUMBERS 11 FAL-11 .205 FASTON TERMINAL Jack Schematic1 Typical Mating Plug Open circuit I 250 C11 MIL Number M641/6-1 I 440 FA11 .205 inch FASTON terminal I 250 FAL11 .375 inch long bushing .205 FASTON terminal I 250 L11 .375 inch long bushing I 250 12A Tip shunt III 250 C12A MILNumber M641/12-1 III 440 L12A .375 inch long bushing III 250 PC12A PC board mount III 250 13 Isolated "make" circuit V 250 13A Transfer circuit VI 250 13E Isolated "break" circuit IX 250 Part Number LITTEL-JAX(R) COMMERCIAL PHONE JACKS 2- AND 3-CONDUCTOR Littel-Jax phone jacks mate with standard commercial phone plugs and are available with .25" and .21" inside diameter bushings. MIL LITTEL-JAX(R) PHONE JACKS 2- AND 3-CONDUCTOR MIL-SPEC, MIL-J-641 (E) MIL jacks mate with MIL-type phone plugs with .25" (6.35mm) or .21" (5.34mm) diameter bushings. Numbers C11 and C12B have a non-turn locating pin which keys the jack to the mounting surface. For low contact resistance applications, jack number C12A has fine silver contacts on shunts and tip springs. 11 Description MOUNTING Chassis/Panel: See Mounting Data drawing below; smallhole is required only for jacks numbers C11 and C12B with non-turn locating pin. Maximum Panel Thickness: .156" (4mm) for standard .276" (7mm) long bushing; .25" (6.35mm) for .375" (9.5mm) long bushing. NOTE: For panels thicker than .25" see Thick Panel Phone Jax. Insulated Mount: See drawing. S1028 flatwasher and Part Number S1029 shoulder washer must be ordered separately for mounting in .437" diameter hole. NOTE: See Hi-D Jax (R) for jack specifically designed for insulated mounting without additional washers. PC Board Mounting: See Recommended PC Board Layout drawing below for jacks with PC terminals. Recommended PC board thickness is .062". Mounting Centers: 1.188" (30mm) recommended. Centers may vary with jack selected, for example, Number 11 mounts on .813" (20.6mm) and 14B mounts on 1.125" (28.6mm) minimum centers. THREE CONDUCTOR PART NUMBERS 12B Double open circuit IV 267 L12B .375 inch long bushing IV 267 C12B MIL number M641/5-1, .250 inch inside diameter IV 480 13B Tip shunt VII 267 14B Double closed circuit XII 267 PART NUMBERS (.210" INSIDE DIAMETER BUSHING) S11 S12A S12B S13B 2 2 3 3 conductor conductor conductor conductor I III IV VII S250 S250 S267 S267 1. Refer to jack schematics on pages 79 and 80. Other circuits are available; contact factory. STEREO JACK CONNECTIONS DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACKS AND PLUGS (R) LITTEL-JAX 2- AND 3- CONDUCTOR FAX: 773 792-2129 95 * Please visit the product pages on our website for the most up-to-date product information 1/4" PHONE JACKS (continued) LITTEL-JAX(R) COMMERCIAL PHONE JACKS - 2- AND 3-CONDUCTOR AND MIL LITTEL-JAX(R) PHONE JACKS - 2- AND 3-CONDUCTOR MIL-SPEC, MIL-J-641 (E) Life: Commercial Jacks: 10,000 insertion/withdrawal cycles, minimum. Military Jacks: 20,000 insertions/ withdrawals, minimum. Mechanical Shock: Military Jacks: Per MIL-STD 202, method 213, Test Condition H (75g). Vibration: Military Jacks: Per MIL-STD-202, method 213, (10-55 Hz). Insertion/Withdrawal Forces: (see charts below) Sleeve Terminal: Copper alloy. Hardware: Supplied with one Number P10001 copper alloy nickel-plated hex nut, and one Number 51022 steel nickel-plated washer - except copper alloy nickel-plated washer Number S10451 supplied on C11, C12A and C12B. *Commercial jacks feature integral contacts. Integral contacts should not be used where low contact resistance is a requirement. Littel Jax(R) Jacks COMMERCIAL JACKS Plug Diameter (inches) Insertion (maximum) Withdrawal (minimum) .210 7 lb. 1 lb. .250 7 lb. 1 lb. MILITARY JACKS Part Number Insertion (maximum) Withdrawal (minimum) Withdrawal (maximum) C11 6 lb. 2 lb. 7 lb. C12A 7 lb. 3 lb. 7 lb. C12B 6 lb. 1.5 lb. 5 lb. 11, L-11, C-11, S-11 *.276" for No. FA-11 FA-11, FAL-11 S-12A, SC-12A 12 12-A, L-12A S-12A, SC-12A 12A, L-12A ELECTRICAL Contact Resistance: Commercial Jacks - .030 ohms maximum (initial), .050 ohms maximum (after humidity, durability exposure). Per MIL-STD-202E. Military Jacks .010 ohms maximum (initial), .020 ohms maximum (after life), .10 ohms maximum (after salt spray). Insulation Resistance: Commercial Jacks - 10,000 M minimum (initial), 1,000 M minimum (after humidity). Military Jacks - 10,000 M minimum (initial), 1,000 M minimum (after humidity, durability exposure). Dielectric Withstanding Voltage: 500 V, 60 Hz (rms) AC. Contact Rating: 1 A, 25 V DC. PC-12A 12B, C12B S-12B, SC-12B 13 ENVIRONMENTAL Thermal Range: Commercial Jacks; -55C to +85C (non-operating); -20C to +65C (operating). Military Jacks; 55C to +85C (non-operating); -40C to+65C (operating). Thermal Shock: Commercial Jacks - Per MIL-STD 202, method 107. Military Jacks - Per MIL-STD 202, method 107. Humidity: Commercial Jacks - Per MIL-STD 202, method 106. Military Jacks - 0% to 95% operating and non-operating. Salt Spray: Commercial Jacks - Per MIL-STD 202, method 101. Military Jacks - Per MIL-STD 202, method 101 (48 hours). Moisture Resistance: Military Jacks - Per MIL-STD 202, method 106 (240 hours). 13B, S-13B MATERIAL 13E Mounting Bushing: Nickel-plated copper alloy. Insulation: Rigid plastic. Springs: Special copper alloy. Integral contacts are standard in the isolated switching circuits; fine silver contacts in C12A switching circuit. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 14B 13A JACKS AND PLUGS SPECIFICATIONS MECHANICAL 96 JACKS AND PLUGS ENCLOSED JACKS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information JACKS AND PLUGS 1/4" ENCLOSED TELEPHONE JACKS Series M11* Series MNS11* Compactly constructed jacks permit direct cross-patching with Switchcraft, WEco and MIL-type telephone plugs and patch cords. Series M Hi-D Jax(R) offer a choice of solder lugs or PC terminals. Both insulated and metal bushings can be specified, as well as .21" inside diameter sleeves for narrow plug fingers. Maximum contact resistance is .1 ohm. Springs are made of a special gold-plated copper alloy. Welded cross bar gold alloy contacts are available on special order. SERIES M-11* HI-D JAX(R) Two- and 3-conductor type mate with .25" diameter finger plugs. Tip and ring springs are gold-plated. Shunts (if used) have welded crossbar palladium contacts. Ring springs (where used with shunts) have welded crossbar palladium contacts. Tip springs (when used) do not have a contact welded to the spring. Bushing has 3/8-32-NEF-2 thread; locknut and flat washer for mounting are supplied. SERIES MN-11* HI-D JAX(R) Same as Series M-11* except threaded bushing is molded thermoplastic for insulated mounting. Continuous sleeve contact assures positive sleeve connection without exposed metal on front of panel. (R) SERIES M113 AND M114 HI-D JAX The versatile 3-conductor M113 and M114 feature springs which accept a wide variety of 1/4" plug designs. Self-aligning PC terminals allow for easier insertion into a printed circuit board. Also feature a metric thread mounting. Series MS11* Series MN11* MECHANICAL Life: 10,000 insertion/withdrawal cycles, minimum. Insertion/Withdrawal Forces: Nominal plug retention on 2-conductor jack is .75 pounds with .5 pounds minimum. Nominal plug retention on 3-conductor jack is 2 pounds with 1.5 pounds minimum. With double tips, the nominal is 1.5 pounds and 1 pound minimum. Maximum Recommended Mounting Torque: 6" -lb. for thermoplastic bushing. Mounting Torque (for Spring Lock PC Terminal): 8" -pound for thermoplastic bushings. ELECTRICAL Contact Resistance: .020 ohms maximum (initial), .050 ohms maximum (after humidity, durability exposure). Per MIL-STD-202E. Insulation Resistance: 10,000 M minimum (initial), 1,000 M minimum (after humidity). Dielectric Withstanding Voltage: 500 V, 60 Hz (rms) AC. Contact Rating: 0.25, 48 VDC make and break, 3A carry only. ENVIRONMENTAL Thermal Range: -55C to +85C (non-operating); -20C to +65C (operating). Thermal Shock: Per MIL-STD 202, method 107. Humidity: Per MIL-STD 202, method 106. Salt Spray: Per MIL-STD 202, method 101. SPECIFICATIONS MATERIALS Mounting Bushing: Series M11*, MS11* - Nickel-plated copper alloy. Series MN11*, MNS11* - Molded thermoplastic. Housing: Molded thermoplastic, UL 94V-0. Springs: Copper alloy. Contacts (mil-type): Tip and Ring Springs are gold-plated. Shuntsprings (where used) are welded crossbar palladium. Welded crossbar gold alloy contacts are available on special order. Contacts (commercial): Tin-plated integral contacts. Sleeve Terminal: Steel, tin-plated. Hardware: Supplied with one P10001 copper alloy, nickel-plated locknut and one S10221 steel, nickel-plated washer. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACKS AND PLUGS ENCLOSED JACKS FAX: 773 792-2129 97 * Please visit the product pages on our website for the most up-to-date product information 1/4" ENCLOSED TELEPHONE JACKS (CONTINUED) ORDERING INFORMATION 3-conductor with .21" inside diameter sleeve. Mates with plugs having .206" diameter finger. Protects against accidental insertion of .25" diameter finger plugs. Gold-plated tip and ring springs. Welded crossbar palladium contacts on shunt springs standard. Bushing has 3/8-32-NEF-2 thread; locknut and flat washer for mounting are supplied. Order by part number from table. SERIES MNS11* HI-D JAX (R) Same as Series MS11* except bushing is molded thermoplastic. TWIN M11* HI-D JAX(R) Two Series M11* Hi-D Jax strapped on .625" centers. Mates with Switchcraft(R) Twin Plugs. 411, 412 and 413. MIL-type Littel-Plug(R) phone plugs, 420, 430 and 440 (2-conductor) and 482 and 483 (3-conductor) are also recommended for mating with this series. 2-CONDUCTOR Part Number Solder Lugs Part Number PC Terms M111 - M111 MN111 M112A - M112APC M112A M112APC MN112A MN112A MN112APC MN112APC M113E M113E - MN113E MN111 MN113E - Description .25" .25 I.D. inchsleeve, I.D. sleeve, metal bushing. .25" .25 I.D. inchsleeve, I.D. sleeve, molded thermoplastic bushing. .25" .25 I.D. inchsleeve, I.D. sleeve, metal bushing. .25" .25 I.D. inchsleeve, I.D. sleeve, molded thermoplastic bushing. .25" .25 I.D. inchsleeve, I.D. sleeve, metal bushing. .25" .25 I.D. inchsleeve, I.D. sleeve, molded thermoplastic bushing. Typical Sche- Mating matic** Plug* I III 420 IX Special Order only; contact Switchcraft. * Other mating plugs are contained in this plug section. ** See pages 79 and 80. 3-CONDUCTOR Part Number Solder Lugs Part Number PC Terms M112B M112BPC ML112B MN112B MNL112B M113B MN113B Description .25" inch I.D. sleeve, metal bushing. - .25" inch I.D. sleeve, .375 inch long metal bushing. MN112BPC .25 inch I.D. sleeve, molded thermoplastic bushing. - .25 inch I.D. sleeve, .375 inch long metal bushing. - .25 inch I.D. sleeve, metal bushing. MN113BPC .25 inch I.D. sleeve, molded thermoplastic bushing. M113BPC1M .25 inch I.D. sleeve, molded thermoplastic bushing, metric hardware Schematic1 Typical Mating Plug2 3-CONDUCTOR Part Part Number Number ML112B Description MN112B Solder M112B Lugs PC Terms Typical Sche- Mating M113B matic1 Plug2 MNL113B 482 IV .25 inch I.D. sleeve, MN113B- M112BPC MN112BPC .375 inch long metal bushing. MN113BPC M113PPC1M M114B M114BPC .25 inch I.D. sleeve, MNL113B MNL112B M114B VII metal bushing. M114BPC1M .25 inch I.D. sleeve,MN114B M114BPC M114BPC1M metal bushing, MN114BPC metric hardware. XII MN114B 482 VII MN114BPC .25 inch I.D. sleeve, molded thermoplastic bushing. Special order only; contact Switchcraft for price and delivery. 1 See schematics, pages 79 and 80. 2 Number(s) specified are not necessarily the only mating plug(s). See Plugs Section. 482 DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 482 482 480, 484 JACKS AND PLUGS SERIES MS11* HI-D JAX(R) 98 JACKS AND PLUGS HI-D JAX (R) 2- AND 3-CONDUCTOR PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information 1/4" ENCLOSED PHONE JACKS (continued) JACKS AND PLUGS HI-D(R) JAX 2- AND 3-CONDUCTOR SERIES 11* PC TERMINAL VIEW TWO CONDUCTOR PART NUMBERS SERIES N11* Hi-D Jax(R) 2- and 3-conductor enclosed phone jacks are ideal for panel/chassis and PC board mounting. Unitized molded housing protects springs, provides mechanical and electrical reliability, minimizes leakage and provides low capacity between springs. Mounts on .625" minimum centers in rows or arrays. .25" or .21" inside diameter bushing types, metal or thermoplastic bushings (for insulated mounting). Insulated Hi-D Jax(R) jacks are specifically designed for in-circuit (insulated) mounting from mounting surface and have fully protected enclosed internal sleeve feature. Solder lugs or PC terminals may be selected. MOUNTING Jacks mount in a single .375" diameter hole on .625" minimum centers. Series 11*, N11*, NS11* and S11* mount in panels up to .156" thick. Series L11* and NL11* (long bushing) mount in panels up to .25" thick. Jacks with PC terminals mount on PC boards up to .094" thick. Formed "shoulders" on each terminal provide stable stand-off mount. Threaded bushing permits mechanical connection to equipment panel. Mounting hardware is supplied. Also available is a grounding spur bushing, which allows for positive grounding of the bushing to the chassis. Contact factory for details. SERIES 11* - 2- and 3-conductor types, threaded metal bushing .276" long. .25" inside diameter bushings. SERIES L11* - Same as Series 11*, except bushing is .375" long for mounting in panels up to .25" thick. SERIES N11* - Same as Series 11*, except bushing is molded thermoplastic for insulated mounting. Solder Lug Part Number PC Terminals Part Number Jack Schematic1 Typical Mating Plug2 111 111PC Open circuit N111 N111PC I 250 Insulated bushing I NL111 - 250 .375 " long insulated bushing I 112A 250 112APC Single closed circuit III 250 L112A L112APC .375" long bushing III 250 N112A N112APC Insulated bushing III 250 NL112A - .375" long insulated bushing III 250 113 113PC Isolated "make" circuit V 250 N113 - Insulated bushing V 250 113D 113DPC Transfer circuit (1-C) VI 3 250 113E 113EPC Isolated "break" circuit IX 250 Description THREE CONDUCTOR PART NUMBERS 112B 112BPC Double open circuit IV 267 L112B - .375" long bushing IV 267 N112B N112BPC Insulated bushing IV 267 NL112B - .375" long bushing IV 267 - S112BPC .210" inside diameter bushing IV S-267 113B 113BPC Single closed circuit VII 267 - 113BPC1M Single closed circuit VII - L113B - .375" long bushing VII 267 N113B N113BPC Insulated bushing VII 267 NL113B - .375" long bushing VII 267 113F 113FPC Ring circuit closed XXVIII 267 114B 114BPC Double closed circuit XII 267 114BPC1M Double closed circuit XII - L114BPC .375" long bushing XII 267 N114B N114BPC Insulated bushing XII 267 NL114B NL114BPC .375" long bushing XII 267 L114B 1 Other circuits available; contact factory. Schematics pages 79 and 80. 2 See Plug Section for other options. 3 Two tip springs. Special order only. Contact Switchcraft. SPECIFYING NOTE: Unless otherwise shown in "Description", jacks have .276" long threaded bushings with .25" inside diameter. SERIES NL11* - Same as Series N11*, except bushing is .375" long for insulated mounting in panels up to .25" thick. SPECIFICATIONS MATERIAL SERIES S11* - Same as Series 11*, except bushing has .21" inside diameter. Smaller diameter protects against accidental insertion of plugs with .25" diameter fingers. Mounting Bushing: Series 11*, L11*, S11* Nickel-plated copper alloy. Series N11*, NL11*, NS11* - Molded thermoplastic over nickel-plated copper alloy sleeve. SERIES NS11* - (SPECIAL ORDER ONLY) - Same as Series N11*, except bushing is .21" inside diameter. 113BPC1M AND 114BPC1M - Versatile, 3-conductor 113BPC1M and 114BPC1M feature springs which accept a wide variety of 1/4" plug designs. Self-aligning PC terminals allow for easier insertion into a printed circuit board. Also feature a metric thread mounting. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery (R) JACKS AND PLUGS HI-D JAX 2- AND 3-CONDUCTOR FAX: 773 792-2129 99 * Please visit the product pages on our website for the most up-to-date product information 1/4" ENCLOSED PHONE JACKS (continued) HI-D JAX(R) 2- AND 3-CONDUCTOR JACKS AND PLUGS M Series Hi-D Jax(R) with PC Terminals Hi-D Jax(R) with Insulated Bushing Recommended PCBoard Layout Standard (Solder lugs) .375 (long bushing only) [9.53] DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 100 JACKS AND PLUGS HI-D JAX (R) 2- AND 3-CONDUCTOR PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information SPRING LOCK PC TERMINALS FOR HI-D JAX(R) JACKS AND PLUGS HI-D JAX(R) SHOWING SPRING LOCK PC TERMINALS Hi-D Jax(R) enclosed 1/4" phone jacks offer spring lock PC terminals which close during insertion into PC board. Upon completed insertion, the terminals reopen to securely hold the jack to the PC board during soldering. Solder "fills" the terminals which provides an additional security from loosening. The spring lock terminal is available on all Hi-D Jax(R) which currently offer PC terminals. NOTE: Tip and ground terminals can be specified with spring lock terminals (also ring terminal on 3-conductor jacks). MOUNTING Jacks mount in a single .375" diameter hole on .625" minimum centers. Series 11*, N11* and S11* mount in panels up to .156 " thick. Series NL11* (long bushing) mount in panels up to .250 " thick. Jacks with PC terminals mount on PC boards up to .094 " thick. Spring lock PC terminals hold jack securely to PC board. Threaded bushing permits mechanical connection to equipment panel. Mounting hardware is supplied. See "RECOMMENDED PC BOARD LAYOUT" for further details. CLOSE-UP VIEW OF SPRING LOCK TERMINALS SERIES 11* - 2- and 3-conductor types, threaded metal bushing .276" long. .250 inch inside diameter bushings. SERIES N11* - Same as Series 11* except bushing is molded thermoplastic for insulated mounting. SERIES NL-11* - Same as Series N11* except bushing is .375" long for insulated mounting in panels up to .250" thick. SERIES S11* - Same as Series 11* except bushing has .210" inside diameter Smaller diameter protects against accidental insertion of plugs with .250" diameter fingers. SPECIFICATIONS MATERIAL PARTIAL VIEW SHOWING SPRING LOCK TERMINALS Tip, ring and sleeve terminals are spring lock type. Mounting Bushing: Series 11*, S11*: Nickel-plated copper alloy. Series N11*, NL11*: Molded thermoplastic over plated copper alloy sleeve. ORDERING INFORMATION TWO CONDUCTOR PART NUMBERS Part Number 111PCS N111PCS 112APCS N112APCS 113PCS 113EPCS Jack Description Schematic Open circuit I Insulated bushing I Single closed circuit III Insulated bushing III Isolated "make" circuit V Isolated "break" circuit IX THREE CONDUCTOR PART NUMBERS Double open circuit IV N112BPCS Insulated bushing IV S112BPCS .210" I.D. bushing IV 113BPCS Single closed circuit VII N113BPCS Insulated bushing VII 113FPCS Ring closed circuit XXVIII 114BPCS Double closed circuit XII N114BPCS Insulated bushing XII NL114BPCS .375" long bushing XII 112BPCS RECOMMENDED PC BOARD LAYOUT SPRING LOCK TERMINALS (COMPONENT SIDE) NOTES: 1. SERIES 110PC--ALL HOLES TO CLEAR .078" X .016" TERMINAL. 2. SERIES 110PCS--TIP, RING & SLEEVE HOLES TO BE .055" DIA. RING SHUNT & TIP SHUNT HOLES TO CLEAR .078" X .016" TERMINAL. Typical Mating Plug1 250 250 250 250 250 250 267 267 S267 267 267 267 267 267 267 1 See Jack Section for other mating plugs. Special order only. Contact Switchcraft. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACKS AND PLUGS RIGHT-ANGLE PHONE JACKS FAX: 773 792-2129 101 * Please visit the product pages on our website for the most up-to-date product information 1/4" RIGHT-ANGLE PHONE JACKS SERIES SN37, SN49 AND SN70 SN49A12B SN37A14B with cover Number P2993 SN70B12A SN49C12B These low-profile phone jacks have "snap-in" PC mounting, right-angle plug insertion and available with 2- and 3-conductor circuits and plastic or metal bushings. Ideal for telecommunications, data processing and other high quality audio connecting applications. SERIES SN37A - Right-angle PC mount phone jack with molded plastic housing. Only .375" high, this jack features a plain (non-threaded) bushing and accepts commercial standard phone plugs with .25" diameter finger. Jack circuit selection: 2-conductor * Single open circuit * Shunted tip 3-conductor * Double open circuit * Shunted tip and ring Jack housing snaps into PC boards (.062" thick) and features molded tension fingers to provide stable mount. Location pin polarizes mounting for correct insertion every time. Clearance between housing facilitates board cleaning without disturbing internal springs. SN37 without tension fingers available on special order. Molded housing protects internal parts and allows high density packaging. Supplied with "Snap-On" cover. SERIES SN49A - Similar to Series SN37A, except .492" high and insulated/plain (non-threaded) bushing. "Snap-On" cover available on special order only. SN70C14B Insertion Force: 8 pounds maximum. Withdrawal Force: 1.5 pounds minimum. Life: 10,000 cycles minimum. ELECTRICAL Insulation Resistance: 2 x 106 M at 500 V DC per MIL-STD-202, method 302 (initial). Dielectric Withstanding Voltage: 500 V AC. ENVIRONMENTAL Thermal Range: -55C (-67F) to +85C (+185F) Non operating. -20C to + 65C Operating. Thermal Shock: Per MIL-STD-202d, method 107. Humidity: Per MIL-STD-202, method 106, less steps 7A and 7B. Salt Spray: Per MIL-STD-202, method 101. MATERIAL Housing and Cover: Black thermoplastic, UL 94V-O. Contact Springs: Copper alloy with tin-plated terminals. Hardware: Nickel-plated copper alloy. Metal Bushing: Nickel-plated copper alloy. ORDERING 1. Order jacks from tables on page 103. 2. For all special order items, contact Switchcraft. SERIES SN49B - Similar to Series SN37A, except .492" high and insulated threaded bushing. Washer and hex nut for bushing mount supplied. "Snap-On" cover available on special order only. SERIES SN49C - Similar to Series SN37A, except .492" high and threaded metal bushing. Washer and hex nut for bushing mount supplied. "Snap-On" cover available on special order only. SERIES SN70B - This series features threaded/insulated bushing and .708" in height. Circuit selection and housing features are same as Series SN49B. "Snap-On" cover not available. SERIES SN70C - Same as Series SN70B, except bushing is threaded metal type. SPECIFICATIONS MECHANICAL Shock: Per MIL-STD-202, method 213. Vibration: Per MIL-STD-202, method 201. DIMENSIONS ARE FOR REFERENCE ONLY SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 Inch (mm) JACKS AND PLUGS SN49B12B with cover Number P2994 102 JACKS AND PLUGS RIGHT-ANGLE PHONE JACKS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information 1/4" RIGHT-ANGLE PHONE JACKS (continued) JACKS AND PLUGS SERIES - RA and RN Series RN110 Series RA SERIES RA - 2- and 3-conductor RA Jax(R) are designed with split terminals which provide two distinct advantages over contemporary jacks: 1. Positive retention of jack in PC board during wave soldering. 2. Split terminal permits additional solder flow paths up the terminal for better mechanical/electrical connection Tip spring design facilitates positive retention of differing mating plug tip shapes (industry standard and others). SPECIFICATIONS Housing: Thermoplastic. Bushing: Integral with housing. Springs: Copper alloy, silver-plated (also available with selectively gold-plated contact points and selectively tin-plated terminals). Contacts: Integral, part of shunt springs. NOTE: Specifications for Mechanical, Electrical and Environmental are the same for Hi-D(R) Jax. (page 98) SERIES RN - Right-angle Hi-D Jax(R) permits space-saving mounting on PC boards. Available in 2- and 3-conductor types with or without shunt circuits, which can mate with .25" diameter COMMERCIAL or TELEPHONE/MIL plug fingers. Right-angle jack permits tip of mating plug to be inserted parallel with PC board. Can be mounted on PC boards or combined PC board and panel/chassis. Mounted through .375" diameter holes (locknut and washer supplied) in panels and chassis up to .141" thick. Minimum mounting centers are .625". If insulated mount is desired, mounting with flat, non-conductive washer (not supplied) is recommended. PC terminals mount on boards up to .125" thick, and hand dip or wave soldering, is recommended. Three separate standoffs fit through board to provide stable mounting.Threaded bushing permits optional fastening to panel or chassis. SERIES RN110 - 2- and 3-conductor right-angle types mount in PC boards or panel/chassis. Bushing is .278" long. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACKS AND PLUGS RIGHT-ANGLE PHONE JACKS - SERIES RA, RN AND SN FAX: 773 792-2129 103 * Please visit the product pages on our website for the most up-to-date product information 1/4" RIGHT-ANGLE PHONE JACKS (continued) ORDERING INFORMATION SN49A12B1 SN49A14B1 SN49B111 SN49B12A1 SN49B12B1 SN49B14B1 SN49C11 SN49C12A SN49C12B SN49C14B SN70B11 SN70B12A SN70B12B SN70B14B SN70C11 SN70C12A SN70C12B SN70C14B Description 2-cond., open circuit 2-cond., single closed circuit 3-cond., double open circuit 3-cond., double closed circuit 2-cond., open circuit 2-cond., single closed circuit 3-cond., double open circuit 3-cond., double closed circuit 2-cond., open circuit 2-cond., single closed circuit 3-cond., double open circuit 3-cond., double closed circuit 2-cond., open circuit 2-cond., single closed circuit 3-cond., double open circuit 3-cond., double closed circuit 2-cond., open circuit 2-cond., single closed circuit 3-cond., double open circuit 3-cond., double closed circuit 2-cond., open circuit 2-cond., single closed circuit 3-cond., double open circuit 3-cond., double closed circuit Jack2 Schematic I III IV XII I III IV XII I III IV XII I III IV XII I III IV XII I III IV XII Typical Mating Plug3 250 267 250 267 250 267 250 267 250 267 250 267 1 Series SN37A supplied with Part Number P2993 cover. Series SN49A and SN49B can be supplied with Part Number P2994 cover on special order. Contact Switchcraft. SERIES RA Part Numbers RA49B11 RA49B12A RA49B12B RA49B14B RA49C11 RA49C12A RA49C12B RA49C14B RA70B11 RA70B12A RA70B12B RA70B14B RA70C11 RA70C12A RA70C12B RA70C14B SERIES RN Part Numbers RN111PC RN112APC RN112BPC RN113BPC RN113FPC RN114BPC Description 2-cond., open circuit 2-cond., single closed circuit 3-cond., double open circuit 3-cond., double closed circuit 2-cond., open circuit 2-cond., single closed circuit 3-cond., double open circuit 3-cond., double closed circuit 2-cond., open circuit 2-cond., single closed circuit 3-cond., double open circuit 3-cond., double closed circuit 2-cond., open circuit 2-cond., single closed circuit 3-cond., double open circuit 3-cond., double closed circuit Jack2 Schematic I III IV XII I III IV XII I III IV XII I III IV XII 2-cond., single open circuit 2-cond., single closed circuit 3-cond., double open circuit 3-cond., tip closed, ring open 3-cond., tip open, ring closed 3-cond., double closed circuit I III IV VII XXVIII XII 2 See pages 79 and 80. 3 Other mating plugs are available. Special order only. Contact Switchcraft. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 Typical Mating Plug3 250 267 250 267 250 267 250 267 250 250 267 267 267 267 JACKS AND PLUGS SERIES SN Part Numbers SN37A111 SN37A12A1 SN37A12B1 SN37A14B1 SN49A111 SN49A12A1 ORDERING INFORMATION 104 JACKS AND PLUGS RIGHT-ANGLE PHONE JACKS - SERIES SN PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information 1/4" RIGHT-ANGLE PHONE JACKS (continued) JACK SCHEMATICS JACKS AND PLUGS SERIES SN SERIES SN37A SERIES SN49A SERIES SN49B SERIES SN49C SERIES SN70B SERIES SN70C RECOMMENDED PC BOARD LAYOUT SERIES SN37A, SN49A & SN49B (Component Side) RECOMMENDED PC BOARD LAYOUT SERIES SN49C (Component Side) COVERS, PART NO. P-293 & P-2994 (No. P-2994, special order only) RECOMMENDED PC BOARD LAYOUT SERIES SN70B (Component Side) DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com RECOMMENDED PC BOARD LAYOUT SERIES SN70C (Component Side) Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACKS AND PLUGS 1/4" RIGHT-ANGLE PHONE JACKS - SERIES RA AND RN FAX: 773 792-2129 105 * Please visit the product pages on our website for the most up-to-date product information 1/4" RIGHT-ANGLE PHONE JACKS (continued) SERIES RA and RN JACKS AND PLUGS SERIES RA49B SERIES RA49C SERIES RA70B SERIES RA70C RN SERIES DIMENSIONS RECOMMENDED PC BOARD LAYOUT (Component Side) RECOMMENDED PC BOARD LAYOUT (Component Side) DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 106 JACKS AND PLUGS JACK COVERS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information JACKS AND PLUGS JACK COVERS Reliable, spring-loaded covers effectively seal front panel bushing openings from dust and dirt when mating plugs are not connected to jack. Series 500 is mounted with conventional threaded bushing jacks. Special locknut (comes with Series 500 jack covers) seals tightly against rubber washer when cover is closed. Series 600 is used with certain type tip jacks. Due to variable jack dimensions, two .031" washers are supplied. 515 SPECIFICATIONS MATERIAL Base and Cover: Steel per QQ-S-698; finish per MIL-F-14072 (Sig. C), enamel, semi-gloss. Axle: Copper alloy per QQ-W-321, Type 321, composition B. Plated per QQ-P-416, Type II, Class 3. Spring: Stainless steel per QQ-W-432, Type 302. Hex Nut: Copper alloy per QQ-B-626, composition 22. Same plating as axle. Gasket: Synthetic rubber per MIL-R-6855, Type II, 35-40 Durometer. Washer (600 only): Steel per QQ-S-698; plated per QQ-P-416, Type II, Class 3. Additional Specifications for Numbers 512 and 612: Same as above, except rivet, base, cover and hex nut and washer (Number 612 only) are nickel-plated per QG-N-290. Color Olive Drab Bright Nickel Part No. 510 512 Part No. 610 612 Color Black Navy Gray Part No. 515 520 520 Part No. 615 620 Special order only. Contact Switchcraft. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACKS AND PLUGS FAX: 773 792-2129 1/4" PHONE JACKS - SERIES E (LOCKING) AND THICK PANEL PHONE JACKS 107 * Please visit the product pages on our website for the most up-to-date product information 1/4" PHONE JACKS (continued) THICK PANEL PHONE JACKS LOCKING PHONE JACKS 151 Series E jacks provide stable, secure connections in panels where shock/vibration or accidental disconnect may occur. Plug locks-in automatically upon insertion; press "PUSH" tab to unlock and remove plug. Series E jacks have the same front panel appearance as Series E Q-G(R) audio connectors. SPECIFICATIONS MECHANICAL SPECIFICATIONS MATERIAL Life: 10,000 cycles minimum. ELECTRICAL Mounting Bushing: Nickel-plated copper alloy with knurled flange. Insulating Spacer: Rigid plastic. Insulator/Spring Mount: Thermoplastic. Springs: Copper alloy. Terminals: Tip: Copper alloy. Ring: (Number 152B only) copper alloy. Sleeve: Steel, tin-plated. Hardware: Supplied with one, Number P10531 nickel-plated copper alloy hex nut, and one, Number P14761 nickel-plated copper alloy flat washer. Insulation Resistance: 2 x 106 M at 500 V DC per MIL-STD-202, method 302 (initial). Dielectric Withstanding Voltage: 1,000 V AC (rms). ENVIRONMENTAL Thermal Range: -55C to +85C (non-operating); -20C to +65C (operating). Thermal Shock: Per MIL-STD-202, method 107. Humidity: Per MIL-STD-202, method 106. Salt Spray: Per MIL-STD-202, method 101. MATERIAL Shell: Die-cast zinc, with satin nickel-plating. Black chrome over nickel-plating on special order. Insert and Latch: Thermoplastic, UL 94V-O. Latch Release: Nickel-plated die-cast zinc. Contact Springs: Tin-plated copper alloy. Part Number E111L E112BL Description 2-cond., open circuit 3-cond., double open circuit Jacks are standard 2- and 3-conductor phone jacks with extra long threaded bushing for mounting in panels/chassis up to 1.25" thick. Metal bushing virtually eliminates hum pick-up, and is ideal for electric guitar and speaker connections. Jacks mate with standard commercial phone plugs. See plug section for mating plugs. Jacks mount in a single .469" diameter hole. Rugged cable clamp protects connections from twisting and pulling stresses. Jack Schematic1 I IV Part Number 151 152 152B 153 154 155 Description 2-conductor, open circuit, nickel finish 2-conductor, open circuit, brass finish 3-conductor, double open circuit, nickel finish 2-conductor, open circuit, gold-plated springs, electro-polish brass finish, 9/16-12 UNC wood threads 3-conductor, double open circuit, gold finish, no cable clamp 3-conductor, double open circuit, black satin finish, no cable clamp Jack Schematic I I IV I Typical Mating Plug 280 280 297 280 IV 297 IV Typical Mating Plug2 250 267 1. See Jack Schematics, pages 79 and 80 2. See Plugs Section THICK PANEL PHONE JACKS RECOMMENDED PANEL CUTOUT LOCKING PHONE JACKS, SERIES E DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 JACKS AND PLUGS SERIES E 108 JACKS AND PLUGS EXTENSION JACKS AND 1/4" SPEAKER JACKS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information 1/4" EXTENSION JACKS (IN-LINE) JACKS AND PLUGS TWO-CONDUCTOR PART NUMBERS 80 121, 131 120 Extension Jax(R) jacks are connected to the end of a cable. 2- and 3-conductor jacks mate with standard commercial phone plugs, and have a sturdy cable clamp strain relief, knurled shielded or molded black plastic handles, and a screw type solder terminal. All internal parts are interlocked. Note: See locking phone plugs section. SPECIFICATIONS MATERIAL Body, Sleeve and Shielded Handle: Nickel-plated copper alloy. Plastic Handles: Molded black thermoplastic. Springs: Special copper alloy. Bushing and Flange: Plated copper alloy. Insulation: Thermoplastic. Clamp Terminals: Tin-plated copper alloy. Part Number 80 88 120 121 128 Description Black handle; screw terminals Black handle; solder lugs Shielded handle; screw terminals Shielded handle; solder lugs; cable clamp Shielded handle; solder lugs Mating 1 Plug 250 250 250 250 250 THREE-CONDUCTOR PART NUMBERS Part Number 131 830 S830 838 1230 1238 Description Shielded handle; solder lugs Black handle; screw terminals Similar to No. 830 except, .21" I.D. sleeve Black handle; solder lugs Shielded handle; screw terminals Shielded handle; solder lugs Mating 1 Plug 267 267 480 267 267 267 1. Other mating plugs are available. 121, 131 Z15J 1/4" SPEAKER JACKS High power 2-conductor speaker jack carries 15A (continuous) audio speaker current levels. Jack Number Z15J has positive detent for plug retention. Terminations are solder lug; wires accepted are up to 10 AWG. Red housing indicates high current rating. Recommended mating plugs: 70, 184, 187 series. Z15J SPECIFICATIONS Housing: Glass reinforced thermoplastic, UL 94V-O. Tip Spring and Ground Terminals: Copper alloy. Bushing and Hardware: Nickel-plated copper alloy (hardware supplied). Heat Rise: 30C with 15 A continuous carry. Life: 10,000 (minimum) with proper plug. Part Number Description Z15J High power speaker jack DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery FAX: 773 792-2129 JACKS AND PLUGS (R) SHIELDED PHONE JACKS, SF-JACKS SHORT FRAME JACKS, MINI PHONE JACKS 109 * Please visit the product pages on our website for the most up-to-date product information 1/4" SHIELDED PHONE JACKS Shield is assembled as part of the jack; cover "snaps" into place. Shield is designed for Hi Z circuits. Mounting is through a 3/8" diameter hole in chassis/panel up to .156" thick with hex nut and flat washer (supplied). On special order, jacks with .21 inch inside diameter bushing are available. TWO CONDUCTOR PART NUMBERS Part Number CN11 Description Uses Number 11 Littel-Jax (R) jacks Uses Number 12A Littel-Jax(R) jacks CN12A Jack Schematic1 I III Special order only. Contact Switchcraft. SPECIFICATIONS MATERIAL THREE CONDUCTOR PART NUMBERS Cover and Shield: Copper alloy, nickel-plated. Cable Entry Insulation: Thermoplastic. Uses Number 12B Littel-Jax(R) jacks Uses Number 13B Littel-Jax(R) jacks CN12B CN13B IV VII 1 See jack schematics on pages 79 and 80. 2 See Plug Section for mating information. Special order only. Contact Switchcraft. SF-JAX(R) SHORT FRAME JACKS Typical Part Schematic Mating Mounting No. Cond. Number Plug MIL Type Contacts Rating In. (mm) 24B 3 XII 267 ----25 2 XIII 250 ----.375 (9.52) 53B 3 VII 267 ----hole, 3A 54A 2 XI 250 ----Fine mounts in 125V panels up 54B 3 XII 267 ----Silver to .156 AC 55 2 XIII 250 ----(3.96) thick C-55B 3 XV 482 JJ-095, M641/14-1 Long spring design reliability with minimum behind-panel depth. Series 50 same as Series 20, except solder lug location requires more depth, but less panel space. Number C55B has MIL type insulation and finish. .141" MINIATURE PHONE JACKS 125 MINIATURE EXTENSION JACK, PHONE JACK NUMBER 125 (EIA STANDARD) Cable-mounted Tini-Extension Jax(R) 2-conductor single open circuit jack has built in cable clamp/sleeve terminal. Mates with Tini-Plug(R) phone plugs and other plugs with .141" diameter fingers and compatible tip shape. Shielded housing/handle is knurled for positive fingertip grip; solder lug terminals. Body and handle: Nickel-plated copper alloy. Insulation: Rigid plastic. Springs: Plated copper alloy. TINI-EXTENSION JAX JACK SERIES 50 SERIES 20 24B 25 53B 54A 54B 55 C55B Part Number 125 DIMENSIONS ARE FOR REFERENCE ONLY Description Extension Jack Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 Jack Schematic I Typical Mating Plug 750 JACKS AND PLUGS CN12A 110 JACKS AND PLUGS MINIATURE PHONE JACKS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information JACKS AND PLUGS .141" MINIATURE PHONE JACKS 41 42A 142A PC142A TINI-JAX(R) MINIATURE PHONE JACKS, NUMBERS 41, 42A, 43A TINI-D-JAX(R) MINIATURE ENCLOSED PHONE JACKS, NUMBERS 142A, PC142A Tini-Jax 2-conductor phone jacks, (for limited space connecting, mate with miniature phone plugs having .141 " diameter fingers and compatible tip shape) are 1/3 the size of Littel-Jax(R) and weigh less than 1/8 ounce. Notched insulators interlock internal parts. Unique tip spring shape mates with Switchcraft Tini-Plug(R) phone plugs. Mounting hole: .250" diameter in panels up to .125" thick (mounting hardware supplied). For insulated mount, order two washers separately, Number S1564 (swedged fiber washer .312" diameter mounting hole) and number S2207 (flat phenolic washer). Tini-D Jax uses Hi-D Jax(R) construction and mounts on .375" centers. Weight: 3.6 grams. Number 142A mounts through .25" diameter hole in chassis/panel up to .125" thick. Four standoff dimples can be molded into housing to reduce effective length of bushing to .187" (special order). Number PC142A has special spring terminals for "snap-in" mounting to PC boards up to .125" thick - ready for hand, wave or dip-soldering. SPECIFICATIONS MECHANICAL Life: 5,000 insertion/withdrawal cycles, minimum. Insertion/Withdrawal: 15 ounce minimum, 40 ounce maximum, insertion. 12 ounce minimum, 25 ounce maximum, withdrawal. Life: 5,000 insertion/withdrawal cycles, minimum. ELECTRICAL SPECIFICATIONS MECHANICAL Contact Resistance: .075 ohms maximum. Insulation Resistance: 5,000 M minimum. Dielectric Withstanding Voltage: 250 V AC maximum. Contact Rating: .25A, 48 V DC. ELECTRICAL MATERIAL MATERIAL Mounting Bushing: Nickel-plated copper alloy. Insulating Spacers: Rigid plastic. Springs: Special copper alloy. Sleeve Terminal: Tin-plated copper alloy. Hardware: Supplied with one, Number P11501 nickel-plated copper alloy locknut, and one, Number S17901 nickel-plated steel flat washer. Housing: Molded plastic. Mounting Bushing: Plated copper alloy. Tip Spring: Plated copper alloy, bifurcated. Shunt Springs: Plated copper alloy. Sleeve Bracket: Plated steel. Insulator: Rigid plastic. Hardware: Number 142A supplied with one, Number P1975 nickel-plated copper alloy locknut, and one, Number S3997 nickel-plated steel flat washer. Part Number 41 42A 43A 142A PC142A Description Open circuit Shunted (closed circuit) Special transfer circuit Shunted (closed circuit) Shunted (closed circuit) Jack Schematic1 Typical Mating Plug2 I III Note 3 III III 750 750 750 750 750 Contact Resistance: .10 ohms maximum. Dielectric Withstanding Voltage: 250 V AC maximum. Shunt Tension: 100 grams minimum. 1. See jack schematics, pages 79 and 80. 2. See Plugs Section for mating information. 3. When inserted, plug tip contacts "make" tip spring. Further insertion allows tip to short "make" tip spring and tip spring together. Full insertion opens tip shunt circuit. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACKS AND PLUGS MINIATURE PHONE JACKS FAX: 773 792-2129 111 * Please visit the product pages on our website for the most up-to-date product information .141" MINIATURE PHONE JACKS (continued) JACKS AND PLUGS "TINI-JAX" JACKS 142A "TINI-D" JACKS DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 112 JACKS AND PLUGS 3.5MM DUAL STEREO JACK PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information JACKS AND PLUGS 3.5MM DUAL STEREO JACK UNSHIELDED - 35RAPC7J SHIELDED - 35RAPC7JS FEATURES MATERIALS * 3-conductor, miniature phone jack mates with 3.5 mm finger plugs. * Saves board space...two jacks in a single vertical mount footprint. * Ideally suited for infra-red and convection oven soldering 235C (455F). * Board retention pins accommodate PC board thickness range of .050" to .080". * Single-screw panel mounting hole is standard. * EMI-RFI shield, optional. * Housing UL 94V-0 rated against flammability. Housing: Thermoplastic. Tip and Ring Springs: Silver-plated copper alloy. Shunt Terminals: Silver-plated copper alloy. Sleeve Terminals: Silver-plated copper alloy. Shield: Pre-tinned copper alloy. APPLICATIONS * Multi-media workstations * Headphones/microphone sets * Interactive TV * Audio * Telecommunications * Medical * Computer * Instrumentation PERFORMANCE SPECIFICATIONS Insertion/Extraction Forces, initial: 0.8 to 6 pounds. Dielectric Withstanding Voltage: 500 VAC. Insulation Resistance, initial: 100 Megaohms, min. Contact Resistance: Between plug and jack: 50 milliohms, maximum Between springs and shunts: 30 milliohms, maximum. Life: 5000 cycles, minimum. ORDERING INFORMATION Part Number: Shielded - 35RAPC7JS Unshielded - 35RAPC7J 1. Order by part number. 2. Contact Switchcraft for special order information. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACKS AND PLUGS 3.5MM DUAL STEREO JACK FAX: 773 792-2129 113 * Please visit the product pages on our website for the most up-to-date product information 3.5MM DUAL STEREO JACK (continued) JACKS AND PLUGS NOTES: 1. Shield isolated from terminals 1 and 6. 2. Width of all terminals = 0.032" (0.814 mm). 3. Use Camcar Textron S25 T8 TORX pan head "Duro-PT" thread cutting fastener of appropriate length or equivalent. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 114 JACKS AND PLUGS 3.5MM SINGLE MONO AND STEREO JACKS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information JACKS AND PLUGS 3.5MM SINGLE MONO AND STEREO JACKS 35RAPC4BV4 35RAPC2BHN2 35RAPC2AV 35RAPC4BH3 35RAPC2BH3 35RAPC2BV4 FEATURES MATERIALS * 2 and 3 conductor 3.5mm phone jacks * Right angle PC mount, true SMT versions, and open frame panel mounts * Wide variety of circuits available * Mates with all 3.5mm plugs Right angle PC mount available in low profile, horizontal styles Housing: Thermoplastic, UL94V-1 Terminals: Silver-plated, copper alloy Bushing: Nickel-plated, copper alloy Performance Specifications: Contact Resistance: < 50 milliohms Insulation Resistance: 100 milliohms min. Dielectric Withstanding Voltage: 250 VAC (35RAPC2BHN2- 500 VAC) Open Frame Versions Materials: Housing (35PM2BV2): Thermoplastic, 94V-1 Life: 5000 cycles, min. Bushing: Nickel-plated, copper alloy Insulating Washers: Rigid Plastic Springs: Copper alloy Sleeve Terminal: Tin-plated, copper alloy Hardware: Supplied with one, P11501 nickel-plated brass locknut, and one, S17901 nickel-plated steel flat washer Performance Specifications: Contact Resistance: .075 ohms max. Insulation Resistance: 5,000 Mohms min Dielectric Withstanding Voltage: 250 VAC Life: 5000 cycles, min ORDERING INFORMATION Part numbers which include the letter "N" designate non-threaded bushings. Part numbers without the letter "N" designate threaded bushing. Part Number Description Height vs. Width Bushing Part Number Description Height vs. Width Bushing 35RAPC2AV 35RAPC2AHN2 35RAPC2AHN3 35RAPC2BHN2 35RAPC2BHN3 35RAPC3BHN2 35RAPC3BHN3 35RAPC4BHN2 35RAPC4BHN3 35RAPC2AH3 35RAPC2BH3 35RAPC3BH3 mono mono mono stereo stereo stereo stereo stereo stereo mono stereo stereo vertical horizontal horizontal horizontal horizontal horizontal horizontal horizontal horizontal horizontal horizontal horizontal threaded3 non-threaded non-threaded non-threaded non-threaded non-threaded non-threaded non-threaded non-threaded threaded3 threaded3 threaded3 35RAPC4BH3 35RAPC2AV4 35RAPC2BV4 35RAPC3BV4 35RAPC4BV4 35RAPC2AVN4 35RAPC2BVN4 35RAPC3BVN4 35RAPC4BVN4 stereo mono stereo stereo stereo mono stereo stereo stereo horizontal vertical vertical vertical vertical vertical vertical vertical vertical threaded3 threaded3 threaded3 threaded3 threaded3 non-threaded non-threaded non-threaded non-threaded Replacement Knurl Nut P3345 1. Order by part number 2. Contact Switchcraft for special ordering information 3. Mounting hardware included. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACKS AND PLUGS 3.5MM SINGLE MONO AND STEREO JACKS FAX: 773 792-2129 115 * Please visit the product pages on our website for the most up-to-date product information 3.5MM SINGLE, MONO AND STEREO JACKS (continued) PERFORMANCE SPECIFICATIONS Coil Spring: Steel wire. Bushing: Nickel-plated copper alloy. Terminal: Silver-plated copper alloy. Tip Spring: Silver-plated copper alloy. Shunt Terminal: Plated copper alloy. Cover: Thermoplastic, transparent UL 94V-2. Body: Thermoplastic, UL 94V-1 black color. Contact Resistance: 20 milliohms maximum. Insulation Resistance: 100 milliohms minimum at 250V DC. Dielectric Withstanding Voltage: 250V AC. Life: 5000 cycles, minimum. Insertion Force: 0.88 pounds - 3.5 pounds. Withdrawal Force: 0.88 pounds - 2.64 pounds. 35RAPC2AV4, 35RAPC2BV4, 35RAPC3BV4, 35RAPC4BV4 - STEREO, VERTICAL, THREADED MATERIALS PERFORMANCE SPECIFICATIONS Coil Springs: Steel Wire. Ring Spring: Copper alloy strip, tin alloy plating. Ground Terminal: Copper alloy strip, tin alloy plating. Bushing: Nickel-plated copper alloy. Cover: Thermoplastic, UL 94V-0 black color. Body: Thermoplastic, UL 94V-0 black color. Contact Resistance: 20 milliohms maximum , initial 50 milliohms maximum , after life. Insulation Resistance: 50 megohms minimum at 500V DC. Dielectric Withstanding Voltage: 250V AC. Life: 5 ,000 cycles, minimum. Insertion Force: 0.88 lbs. to 3.50 lbs. Withdrawal Force: 0.88 lbs. to 3.10 lbs. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 JACKS AND PLUGS 35RAPC2AV - MONO, VERTICAL, THREADED MATERIALS 116 JACKS AND PLUGS 3.5MM SINGLE MONO AND STEREO JACKS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information 3.5MM SINGLE, MONO AND STEREO JACKS (continued) JACKS AND PLUGS 35RAPC2AHN2, 35RAPC2BHN2, 35RAPC3BHN2, 35RAPC4BHN2 - STEREO, HORIZONTAL, NON-THREADED MATERIALS PERFORMANCE SPECIFICATIONS Cover: Thermoplastic, UL 94V-1 black color. Ring Spring: Copper alloy. Tip Spring: Silver-plated copper alloy. Ground Terminal: Silver-plated copper alloy. Metal: Copper alloy, nickel plating. Body: Thermoplastic, UL 94V-0 black color. Contact Resistance: 30 milliohms maximum, initial 100 milliohms maximum, after life. Insulation Resistance: 100 megohms minimum at 500V DC. Dielectric Withstanding Voltage: 500V AC. Life: 5000 cycles, minimum. Insertion Force: 0.88 pounds - 6.6 pounds. Withdrawal Force: 0.88 pounds - 6.6 pounds. **Same drawing for jack with non-threaded bushing. 35RAPC2AH3, 35RAPC2BH3, 35RAPC3BH3, 35RAPC4BH3 - STEREO, HORIZONTAL, THREADED MATERIALS PERFORMANCE SPECIFICATIONS Coil Springs: Steel wire. Tip Spring: Silver-plated copper alloy. Ring Spring: Silver-plated copper alloy. Ground Terminal: Silver-plated copper alloy. Bushing: Nickel-plated copper alloy. Cover: Thermoplastic, transparent UL 94V-2. Body: Thermoplastic, UL 94V-1 black color. Contact Resistance: 20 milliohms maximum, initial 100 milliohms maximum, after life. Insulation Resistance: 100 megohms minimum. Dielectric Withstanding Voltage: 250V AC. Life: 5000 cycles, minimum. Insertion Force: 0.88 lbs. - 3.50 lbs. Withdrawal Force: 0.88 lbs. - 3.10 lbs. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACKS AND PLUGS 3.5MM SINGLE MONO AND STEREO JACKS FAX: 773 792-2129 117 * Please visit the product pages on our website for the most up-to-date product information 3.5MM SINGLE MONO AND STEREO JACKS FEATURES AND BENEFITS 3.5MM SINGLE MONO AND STEREO JACKS * SMT mounting * Tape and reel packaging * Wide variety of circuits APPLICATIONS * Computer * Video Cameras * Personal/Portable Audio Devices * Multimedia SPECIFICATIONS Electrical Current Rating: 3A Contact Resistance: <50 mohms Insulation Resistance: 100 mohms (min.) Dielectric Withstanding Voltage: 250VAC @ 1 minute MECHANICAL Lifecycles: 5,000 Operating Temperature: -25C to +85C 35RASMT Part Number/Description 35RASMT2AHNTR Mono, closed circuit, on tape and reel 35RASMT2BHNTR Stereo, dual open circuit, on tape and reel 35RASMT3BHNTR Stereo, tip closed and ring open circuit, on tape and reel 35RASMT4BHNTR Stereo, dual closed circuit, on tape and reel MATERIAL Housing: Black thermoplastic Sleeve, Ring and Tip Terminals: Copper Alloy, silver-plated Shunt Terminal: Copper Alloy, Silver-plated (See next page for drawings.) DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 JACKS AND PLUGS Switchcraft introduces a new series of 3.5mm jacks. These low profile jacks come in a wide variety of circuits, both 2 and 3 conductor versions. Circuits include mono closed, stereo open, stereo tip closed and ring open, and stereo closed. The 35RASMT Series is available on tape and reel only. Contact Switchcraft for exact dimensions of the reels. They're designed for use in today's electronic equipment that features remote speakers, headsets, and headphones. While they are more compact than commonly used PC mount phone jacks, they are still extremely durable. Jacks come on tape and reel, 1K per reel. 118 JACKS AND PLUGS 3.5MM SINGLE MONO AND STEREO JACKS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information JACKS AND PLUGS 3.5MM SINGLE MONO AND STEREO JACKS (continued) DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACKS AND PLUGS 3.5MM SINGLE MONO JACKS FAX: 773 792-2129 119 * Please visit the product pages on our website for the most up-to-date product information 3.5 mm SINGLE MONO JACKS JACKS AND PLUGS 35PM1 35PM2A FEATURES MATERIAL * 2-conductor phone jacks similar to Littel-Jax(R) phone jacks, but smaller. * For connecting in limited space * Mate with 3.5 mm phone plugs * Notched insulators interlock internal parts * Mounting hole: .250" diameter in panels up to .125" thick (mounting hardware supplied) * For insulated mount, order two washers separately, Number S1564 (swedged fiber washer .312" diameter mounting hole) and number S2207 (flat phenolic washer) Mounting Bushing: Nickel-plated copper alloy. Insulating Spacers: Rigid plastic. Springs: Copper alloy. Sleeve Terminal: Tin-plated copper alloy. Hardware: Supplied with one, Number P11501 nickel-plated brass locknut, and one, Number S17901 nickel-plated steel flat washer. SPECIFICATIONS MECHANICAL Life: 5,000 insertion/withdrawal cycles, minimum ELECTRICAL DESCRIPTION JACK SCHEMATIC1 TYPICAL MATING PLUG 35PM1 Open circuit I 750 35PM2A Shunted (closed circuit) III 750 PART NUMBER 1. See jack schematics on pages 79 and 80. Contact Resistance: .075 ohms maximum Insulation Resistance: 5,000 M minimum Dielectric Withstanding Voltage: 250V AC maximum Contact Rating: .25A, 48V DC ORDERING INFORMATION 1. Order by part number. 2. Contact Switchcraft for more information. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 120 JACKS AND PLUGS 2.5MM SINGLE MONO AND STEREO JACKS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information JACKS AND PLUGS 2.5MM SINGLE MONO AND STEREO JACKS Switchcraft introduces a new series of 2.5mm jacks. These low profile jacks come in a wide variety of circuits, both 2 and 3 conductor versions. Circuits include mono closed, stereo open, stereo tip closed and ring open, and stereo closed. The MDSMT Series is available on tape and reel only. Contact Switchcraft for exact dimensions of the reels. They're designed for use in today's electronic equipment that features remote speakers, headsets, and headphones. While they are more compact than commonly used PC mount phone jacks, they are still extremely durable. FEATURES AND BENEFITS * SMT mounting * Tape and reel packaging * Wide variety of circuits MDSMT4BRATR APPLICATIONS * Computer * Video Cameras * Personal/Portable Audio Devices * Multimedia SPECIFICATIONS Electrical Current Rating: 3A Contact Resistance: <50 mohms Insulation Resistance: 100 mohms (min.) Dielectric Withstanding Voltage: 250VAC @ 1 minute MECHANICAL Lifecycles: 5,000 Operating Temperature: -25C to +85C MATERIAL Housing: Black thermoplastic Sleeve, Ring and Tip Terminals: Copper Alloy, silver-plated Shunt Terminal: Copper Alloy, Silver-plated 2.5MM SINGLE MONO AND STEREO JACKS Part Number/Description MDSMT2BRATR Stereo, dual open circuit MDSMT2ARATR Mono, closed circuit MDSMT3BRATR Stereo, tip closed and ring open circuit MDSMT4BRATR Stereo, dual closed circuit DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACKS AND PLUGS SUBMINIATURE PHONE JACKS FAX: 773 792-2129 121 * Please visit the product pages on our website for the most up-to-date product information .101" SUBMINIATURE PHONE JACKS TR1PC MDPC2A MDSL2A MDSL2ARA MDPC2ARA MECHANICAL - TR1PC: Extremely small, rugged, shunted Micro-Jax(R) 2-conductor jack is 1/4 the size of a standard phone jack and weighs less than 1/20 ounce. Can be wired for open or closed circuit operation. Internally keyed insulators interlock all parts and tip springs grip mating plugs positively. Mates with Switchcraft Micro-Plug(R) phone plugs. Jacks mount through .190" diameter hole in chassis/panels up to .093" thick. For insulated mounting, a .281" diameter hole and .050" maximum panel thickness applies. Order insulating washer separately. Number P1617 (flat phenolic washer) and Number P1618 (swedged fiber washer). Number TR1PC: 2-conductor closed circuit jack with PC terminals. Open frame and enclosed versions available. Mates with Switchcraft(R) Micro Plug(R) numbers 850, 855, and 880. Life: 10,000 insertion/withdrawal cycles, minimum. Insertion/Withdrawal Forces: 11 ounces insertion, 11 ounce minimum withdrawal. SUBMINIATURE ENCLOSED PHONE JACKS Life: 10,000 insertion/withdrawal cycles minimum. Insertion/Withdrawal Forces: 11 ounce insertion, 11 ounce minimum withdrawal. Micro-D Jax(R) 2-conductor jacks have insulated box construction and subminiature size. Number MDPC2A: 2-conductor closed circuit jack with PC terminals. Mounts to single-, double-sided or multilayer boards either singly or in rows as close as .344" centers (+/- .01 inches). Bushing is .10" inside diameter. Number MDSL2A: Same as MDPC2A except, 1. solder lugs, 2. bushing is #10-48 threaded (nut and washer supplied), and 3. mount ing centers are .35" or .313". When mounted on .313" centers, sleeves or adjacent jacks may be in intimate contact. Mounts through a .203" diameter hole in chassis/panels up to .063" thick. SUBMINIATURE RIGHT-ANGLE PHONE JACKS 2-conductor jacks have molded housing which protects all internal parts. Panel/chassis or PC boards mounting in rows, if desired, on .351" centers. PC terminals need only .382" behind-panel clearance. Number MDPC2ARA: PC terminals mount/terminate directly to PC or multilayer boards. Bushing clears a .156" diameter panel hole. Number MDSL2ARA: Right-angle solder lugs and #10-48 threaded bushing for chassis/panel mount. Mounts in .203" diameter hole in chassis/panels up to .063" thick. SPECIFICATIONS - MICRO-JAX(R) ELECTRICAL: Contact Resistance: .10 ohms maximum (spring to plug). Shunt Resistance: .10 ohms maximum. Dielectric Withstanding Voltage: 250 V AC. Shunt Tension: 60 grams minimum. MATERIAL: Mounting Bushing: Nickel-plated copper alloy. Insulating Spacers: Rigid plastic. Springs: Nickel-plated copper alloy. Integral contacts are plated. Tip, Shunt and Sleeve Terminals: Silver-plated copper alloy. Hardware: Supplied with one, P15331 nickel-plated copper alloy hex nut, and one S29571 nickel-plated copper alloy flat washer. MATERIAL - TR1PC Threaded Bushing: Nickel-plated copper alloy. Tip Spring: Copper alloy. Sleeve/Ground Terminal: Copper alloy tin-lead with nickel underplate. ENVIRONMENTAL - TR1PC: Thermal Range: -55C to +85C (non-operating); -20C to +65C (operating). Thermal Shock: Per MIL-STD-202, method 107. Humidity: Per MIL-STD-202, method 106. Salt Spray: Per MIL-STD-202, method 101. SPECIFICATIONS - MICRO-D JAX MECHANICAL: ELECTRICAL: Contact Resistance: .010 ohms maximum (initial), .020 ohms maximum (after humidity, durability exposure), .10 ohms maximum (after salt spray). Insulation Resistance: 10,000 M minimum (initial), 1,000 M minimum (after humidity, durability exposure). Dielectric Withstanding Voltage: 500 V AC maximum. Contact Rating: .125 A, 125 V AC. ENVIRONMENTAL: Thermal Range: -55C to +85C (non-operating); -20C to +65C (operating). Thermal Shock: Per MIL-STD-202, method 107. Humidity: Per MIL-STD-202, method 106. Salt Spray: Per MIL-STD-202, method 101. MATERIAL: Housing: Glass reinforced plastic. Insulation: Rigid plastic. Mounting Bushing (Micro-D): Nickel-plated copper alloy. Mounting Bracket (Right-Angle Micro-D): Nickel-plated copper alloy. Tip Spring: Silver-plated copper alloy. Shunt Terminal: Silver-plated copper alloy. Sleeve Terminal (Micro-D): Steel, tin-plated. Sleeve Terminal (Right-Angle Micro-D): Silver-plated copper alloy. Hardware (Micro-D): Same as Micro-Jax (MDSL2A). Hardware (Right-Angle Micro-D): Hex nut, nickel-plated copper alloy, Number P15331; flat washer, nickel-plated copper alloy S29571; not supplied with MDPC2A. Part Jack No. Schem.1 TR2A TR1PC III MDPC2A } Typical Mating Plug2 850 Part Jack Typical No. Schem.1 Mating Plug2 MDSL2A MDPC2ARA III 850 MDSL2ARA } All are 2-Conductor (closed circuit). Note 1.: See Jack Schematics page 79 and 80. Note 2.: See Plugs Section for mating information. DIMENSIONS ARE FOR REFERENCE ONLY SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 Inch (mm) JACKS AND PLUGS TR2A SUBMINIATURE PHONE JACKS, TR2A AND TR1PC 122 JACKS AND PLUGS SUBMINIATURE PHONE JACKS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information JACKS AND PLUGS .101" SUBMINIATURE PHONE JACKS DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACKS AND PLUGS PHONO JACKS FAX: 773 792-2129 123 * Please visit the product pages on our website for the most up-to-date product information BULKHEAD PHONO JACKS 3501FP 3517PC 3501FR BPJR01 3514PC BPJF01 BPJJ01 3515PC 3505F 3503 FEATURES AND BENEFITS SPECIFICATIONS * Front or rear mount configurations * Durable plated machined brass construction * All mounting hardware is included Material and Platings Housing: Nickel or Gold-plated Brass Contact: Nickel-plated Brass Insulator: ABS Hardware: Nickel-plated Brass. Switchcraft introduces a complete line of bulkheadmount phono (RCA) jacks to meet the most critical audio, audio/video, and general-purpose electronic applications. These jacks are offered in front and rear mount solder type as well as jack to jack bulkhead configurations. These jacks are available with black, white, blue, green, red, and yellow insulators and nickel or gold plated bodies. All mounting hardware is included. Housing: Nickel or gold plated, copper alloy (3514PC, 3515PC, 3517PC: Nickel plated, steel) Terminals: Nickel plated, copper alloy (3515PC: Tin plated, copper alloy) Bushing: Nickel-plated, copper alloy (3515PC: Ceramic) Insulators: Thermoplastic (3517PC: Ceramic and glass filled thermoplastic) APPLICATIONS * Audio * Video * General Purpose Electronics OPTIONS * * * * Front or rear mount solder type receptacles Jack to jack bulkhead configuration Insulator colors Gold or nickel plating (See next page for drawings.) Part Number Description BPJR01 Rear mount, black insulator BPJR01AU Rear mount, black insulator, gold plated BPJR02 Rear mount, red insulator BPJR02AU Rear mount, red insulator, gold plated BPJR03 Rear mount, white insulator BPJR03AU Rear mount, white insulator, gold plated BPJR04 Rear mount, yellow insulator BPJR04AU Rear mount, yellow insulator, gold plated BPJR05 Rear mount, blue insulator BPJR05AU Rear mount, blue insulator, gold plated BPJR06 Rear mount, green insulator BPJR06AU Rear mount, green insulator, gold plated 3501F Rear mount, rigid plastic mounting flange 3501FR Rear mount, natural insulator For insulated mounting, order S1028 and S1029 insulating washers BPJF01 BPJF01AU BPJF02 BPJF02AU BPJF03 BPJF03AU BPJF04 BPJF04AU Front mount, black insulator Front mount, black insulator, gold plated Front mount, red insulator Front mount, red insulator, gold plated Front mount, white insulator Front mount, white insulator, gold plated Front mount, yellow insulator Front mount, yellow insulator, gold plated Part Number Description BPJF05 Front mount, blue insulator BPJF05AU Front mount, blue insulator, gold plated BPJF06 Front mount, green insulator BPJF06AU Front mount, green insulator, gold plated 3501FP Front Mount, natural insulator 3505F RF version, uses low-loss nylon insulation For insulated mounting, order S2207 and S1564 insulating washers BPJJ01 BPJJ01AU BPJJ02 BPJJ02AU BPJJ03 BPJJ03AU BPJJ04 BPJJ04AU BPJJ05 BPJJ05AU BPJJ06 BPJJ06AU Feed through, black insulator Feed through, black insulator, gold plated Feed through, red insulator Feed through, red insulator, gold plated Feed through, white insulator Feed through, white insulator, gold plated Feed through, yellow insulator Feed through, yellow insulator, gold plated Feed through, blue insulator Feed through, blue insulator, gold plated Feed through, green insulator Feed through, green insulator, gold plated 3503 Extension jack, shielded handle 3514PC 3515PC Vertical PC mount, nickel plated steel bushing Vertical PC mount, ceramic bushing 3517PC Horizontal PC mount, nickel plated steel bushing DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 JACKS AND PLUGS 3501F 124 JACKS AND PLUGS PHONO JACKS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information JACKS AND PLUGS PHONO JACKS (continued) DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACKS AND PLUGS PHONO JACKS AND PHONO JACK SETS FAX: 773 792-2129 125 * Please visit the product pages on our website for the most up-to-date product information PHONO JACKS AND PHONO JACK SETS PJRAS1X1S04 PJRAN3X1U03 PJRAS1X2S02 PJRAS3X1S01 PJRAS4X2U01 FEATURES AND BENEFITS High temperature plastic housings and long life contacts Snap fit PCB contacts and housings Low profile footprint Numerous options and configurations APPLICATIONS * Audio * Video * General Purpose Electronics OPTIONS * Right angle and straight PCB mount * Horizontal and vertical justification PJRAS3X2S01 PJRAN3X1U02 PJRAS1X3S01 Switchcraft, the industry recognized leader in audio-video connectivity, introduces the addition of a comprehensive line of PCB Mount RCA Jacks and Jack Sets. Switchcraft's newest product family addresses the requirements of the most critical audio and audio/video applications. 1, 2, 3, 4, 6, and 8 position jack sets are offered in a variety of color combinations with numerous plating, grounding, shielding, mounting, and justification options. * * * * PJRAN2X1U02 * * * * PJRAS2X1S01 PJRAS2X2S01 PJRAS1X3U01 Shielding and grounding Bulkhead mounting screw Colors Plating SPECIFICATIONS ELECTRICAL Temperature Range: -25 to +80C Rated Voltage: 34V DC or AC Withstand Voltage: 500V Rated Current: 2A DC or AC Dielectric Strength: 500V AC @ 1 minute Contact Resistance: <30 mohms Insertion Force*: <29.4N Extraction Force*: 1N to 29.4N * Depends Upon Mating Plug MATERIAL AND PLATINGS Housing: UL94-HB Rated, ABS Insulators: ABS Ground Shell and Terminal: Nickel or Gold Plated, Copper Alloy Terminals: Tin Plated Copper Alloy DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 JACKS AND PLUGS PJRAN1X1U03 126 JACKS AND PLUGS PHONO JACKS AND PHONO JACK SETS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information PHONO JACKS AND PHONO JACK SETS (continued) 2 POSITION PCB MOUNT JACKS AND PLUGS 1 POSITION PCB MOUNT Part Number Color Part Number Color PJRAN1X1U01 Black PJRAN2X1U01 Red/White PJRAN1X1U02 White PJRAN2X1U02 White/Red PJRAN1X1U03 Red PJRAS2X1S01 Red/White PJRAN1X1U04 Yellow PJRAS2X1S02 White/Red Call factory Green PJRAS1X2S01 Call factory Blue Red White PJRAS1X1S01 Black PJRAS1X2S02 PJRAS1X1S02 White White Red PJRAS1X1S03 Red PJRAS1X1S04 Yellow Call factory Green Part Number Color Blue PJRAS2X2S01 White x 2 Red x 2 PJRAS3X2S01 White x 3 Red x 3 PJRAS3X2S02 Red/White/Yellow Red/White/Yellow PJRAS4X2U01 White x 4 Red x 4 Call factory 4, 6, & 8 POSITION PCB MOUNT 3 POSITION PCB MOUNT Part Number Color PJRAN3X1U01 Red/Yellow/White PJRAN3X1U02 Red/Green/Blue PJRAS3X1S01 Red/White/Yellow PJRAS3X1U03 Red/Green/Blue PJRAS1X3S01 Red PJRAS1X3S02 COMBINATION PHONO AND S-VIDEO PCB MOUNT White Yellow Part Number Color PJRAN3X1U02 Red/White/Yellow Green Blue Red PJRAS1X3U01 Yellow White Red Ordering Information (Contact factory for color, shielding, grounding, justification options.) S 1,2,3, or 4 By 1,2, or 3 DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com S 01 S - Shielded U - Unshielded AU Ground Shell Plating Mounting S - Screw(s) N - No Screws # Positions Vertical Justification RA - Right Angle ST - Straight X Positions Horizontal Product Type Phono Jack # Version RA Shielding PJ AU/Gold Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACKS AND PLUGS PHONO JACKS AND PHONO JACK SETS FAX: 773 792-2129 127 * Please visit the product pages on our website for the most up-to-date product information PHONO JACKS AND PHONO JACK SETS (continued) JACKS AND PLUGS DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 128 JACKS AND PLUGS PHONO JACKS AND PHONO JACK SETS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information JACKS AND PLUGS PHONO JACKS AND PHONO JACK SETS (continued) DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACKS AND PLUGS PHONO JACKS AND PHONO JACK SETS FAX: 773 792-2129 129 * Please visit the product pages on our website for the most up-to-date product information PHONO JACKS AND PHONO JACK SETS (continued) JACKS AND PLUGS DIMENSIONS ARE FOR REFERENCE ONLY SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 Inch (mm) 130 JACKS AND PLUGS RIGHT ANGLE MINIATURE POWER JACKS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information JACKS AND PLUGS RIGHT ANGLE MINIATURE POWER JACKS RASM 722 RASM 732P RASM 712 RASM752STR RAPC742 RAPC732OF RASM752TR SPECIFICATIONS: Materials: Housing: Thermoplastic Terminals: RAPC700: Sleeve: Silver plated copper alloy Tip: Nickel plated, copper alloy RAPC742, RASM742TR, RAPC732OF, RAPC742OF, RAPC752, RAPC752S, RASM752TR, RASM752STR: Sleeve and tip: Silver plated tin Shunt: Silver plated copper alloy RASM700, RASH700: Sleeve: Tin plated copper alloy Tip: Nickel plated copper alloy) ELECTRICAL Current Rating: 3A (RAPC700, RASH700, RASM700: 5A) Contact Resistance: <50 mohms Insulation Resistance: 100 mohms min. (RAPC700, RASH700, RASM700: 30 megohms @100V DC) Dielectric Withstanding Voltage: 250 VAC@ 1 minute MECHANICAL: RASM742TR Part Number RAPC712 RASH712 RASM712 RAPC722 RASH722 RASM722 RAPC732 RAPC732OF RASH732 RASM732 RAPC742 RAPC742OF RASM742TR RAPC752 RAPC752S RASM752TR RASM752STR Pin Size* 0.100"/2.5mm 0.100"/2.5mm 0.100"/2.5mm 0.080"/2.0mm 0.080"/2.0mm 0.080"/2.0mm 0.050"/1.3mm 0.050"/1.3mm 0.050"/1.3mm 0.050"/1.3mm 0.040"/1.0mm 0.040"/1.0mm 0.040"/1.0mm 0.025"/0.65mm 0.025"/0.65mm 0.025"/0.65mm 0.025"/0.65mm Description Right Angle, PC mount Right Angle, hybrid mount Right Angle, SMT mount Right Angle, PC mount Right Angle, hybrid mount Right Angle, SMT mount Right Angle, PC mount Right Angle, PC mount 1 Right Angle, SMT mount Right Angle, hybrid mount Right Angle, PC mount Right Angle, PC mount 1 Right Angle, SMT mount 2 Right Angle, PC mount Right Angle, PC mount 3 Right Angle, SMT mount 2 Right Angle, SMT mount 4 Note: Contact factory for specific information on tape and reel options. *Pin Size (in/mm) 1. Open Frame 2. Tape and Reel. 3. Shielded 4. Tape and Reel, Shielded. Note: Available with P locating post as an option. Note: Available with tin-plating as a special order. Note: Available with Hi-temp material, contact factory for details. Lifecycles: 5,000 min. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACKS AND PLUGS RIGHT ANGLE MINIATURE POWER JACKS FAX: 773 792-2129 131 * Please visit the product pages on our website for the most up-to-date product information RIGHT ANGLE MINIATURE POWER JACKS (continued) RAPC 712/722/732 JACKS AND PLUGS RASM 712/722/732 RASH 712/722/732 DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 132 JACKS AND PLUGS RIGHT ANGLE MINIATURE POWER JACKS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information JACKS AND PLUGS RIGHT ANGLE MINIATURE POWER JACKS (continued) DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACKS AND PLUGS FAX: 773 792-2129 RIGHT ANGLE MINIATURE POWER JACKS 133 * Please visit the product pages on our website for the most up-to-date product information RIGHT ANGLE MINIATURE POWER JACKS (continued) RAPC752 RASM752TR JACKS AND PLUGS PC BOARD LAYOUT COMPONENT SIDE PC BOARD LAYOUT COMPONENT SIDE RAPC752S RASM752STR PC BOARD LAYOUT COMPONENT SIDE PC BOARD LAYOUT COMPONENT SIDE DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 134 JACKS AND PLUGS STRAIGHT MINIATURE POWER JACKS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information JACKS AND PLUGS STRAIGHT MINIATURE POWER JACKS 712A L722A PC712A 2C1072 L712RA FEATURES: Insulators: Rigid Plastic Hardware: Supplied with one P2439 nickel plated copper alloy hex nut, and one P2441 nickel plated steel flat washer * Automatic switch over from AC to DC permitted by sleeve shunt spring. * Split center pin shaped to hold mating plug firmly. * Bushing length available as 0.219" or extended 0.319" to permit use in thicker panels. * Non-turn mounting possible using standard "D" shape bushing. * Insulated mounting hardware available. * Right angle versions offer "kinked" PC terminals for added board retention. ELECTRICAL: Current Rating: 5A, 12V DC resistive Contact Resistance: 0.01 Ohms max. (initial), 0.02 Ohms max. (after humidity, durability exposure), 0.10 Ohms max. (after salt spray) Insulation Resistance: 10,000 Mohms min. (initial), 1,000 Mohms min. (after humidity, durability exposure) Dielectric Withstanding Voltage: 500 VAC max. MATERIALS: Housing: Thermoplastic Bushing: Plated copper alloy Terminals: Plated copper alloy Part Number 712A 712RA L712A L712RA PC712A PCL712A 722A 722RA L722A L722RA PC722A PCL722A 732A 732RA PC732A 2C1072 Pin Size* 0.100"/2.5mm 0.100"/2.5mm 0.100"/2.5mm 0.100"/2.5mm 0.100"/2.5mm 0.100"/2.5mm 0.080"/2.0mm 0.080"/2.0mm 0.080"/2.0mm 0.080"/2.0mm 0.080"/2.0mm 0.080"/2.0mm 0.050"/1.3mm 0.050"/1.3mm 0.050"/1.3mm MECHANICAL: Lifecycles: 10,000 cycles min. Description Solder lugs Right angle PC terminals Solder lugs, long bushing Right angle PC terminals, long bushing Straight PC terminals Straight PC terminals, long bushing Solder lugs Right angle PC terminals, long bushing Solder lugs, long bushing Right angle PC terminals, long bushing Straight PC terminals Straight PC terminals, long bushing Solder lugs Right angle PC terminals Straight PC terminals Jack covers for 712A and 722A Typical Mating Plug 760 760 761K 761K 760 761K S760 S760 S761K S761K S760 S761K 860 860 860 Note: For insulated mounting order P2442 phenolic flat washer and S4263 swedged fiber washer. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACKS AND PLUGS STRAIGHT MINIATURE POWER JACKS FAX: 773 792-2129 135 * Please visit the product pages on our website for the most up-to-date product information STRAIGHT MINIATURE POWER JACKS (continued) JACKS AND PLUGS DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 136 JACKS AND PLUGS VJ SERIES PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information JACKS AND PLUGS VJ SERIES See page 193 for Patch panel information. VJHD*75TX Ordering-Individual Jacks Part Number Type Description VJHD*75TX HD Terminated VJHD*NTX HD Non-terminated VJSD*75TX SD Terminated VJSD*NTX SD Non-terminated *Add "N" for non-normalled version VPP24K3HD75T FEATURES AND BENEFITS * HD Series meets SMPTE 292M Specifications * SD Series has a bandwidth from DC to 1.75GHz * Jacks feature rugged heavy duty housings SMITH CHART (TYPICAL) VIDEO JACK SPECIFICATIONS ELECTRICAL Rated Bandwidth: 2.4 GHz (HD), 1.75 GHz (SD) Characteristic Impedance: 75 ohms Return Loss: Better than -15 dB Insertion Loss: Better than -.5 dB Contact Resistance: Less than 20 milliohms Termination Resistance: 75 W, 1% Center Conductor: Accepts .090 pin diameter MECHANICAL Mechanical Shock: Per MIL-STD-202, Method 213, Test condition I Vibration: Per MIL-STD-202, Method 201 Insertion Force: 12 lbs. maximum Withdrawal Force: 3 lbs. minimum Life Cycle: 30,000 MATERIAL Housing: Zinc alloy, nickel plated Center Contacts: Copper alloy, gold plated Switching Springs: Copper alloy, gold plated Grounding Contacts: HD Series - Copper alloy, gold plated SD Series - Copper alloy, nickel plated Insulators: Thermoplastic, UL 94V-0 rated NON-NORMALLED TERMINATED NORMALLED TERMINATED NORMALLED NON-NORMALLED NON-TERMINATED NON-TERMINATED ENVIRONMENTAL Operating Temperature: - 40C to 65C Storage Temperature: - 55C to 85C Thermal Shock: Per MIL-STD-202, Method 107 Moisture and Humidity: Per MIL-STD-202, Method 106. The HD Series meets SMPTE 292M specifications for high definition video signaling, covering a bandwidth range from DC to 2.4GHz. The SD Series is perfect for serial digital, with a bandwidth from DC to 1.75GHZ. FREQUENCY (MHz) DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com FREQUENCY (MHz) Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACKS AND PLUGS MVJ SERIES FAX: 773 792-2129 137 * Please visit the product pages on our website for the most up-to-date product information MVJ SERIES See page 196 for Patch panel information. MVJ*75T JACKS AND PLUGS FEATURES AND BENEFITS * Midsize video jacks rated from DC to 3 GHz * Available in terminated or non-terminated configurations MIDSIZE VIDEO JACK SPECIFICATIONS ELECTRICAL MVP32K3*75T Rated Bandwidth: 3.0 GHz Characteristic Impedance: 75 ohms Return Loss: See Typical Return Loss Chart Insertion Loss: See Typical Insertion Loss Chart Contact Resistance: Less than 20 milliohms Termination Resistance: 75 W, 1% Center Conductor: Accepts .048 pin diameter MECHANICAL Ordering Information Part Number Jack Description MVJ*75T HD Terminated MVJ*NT HD Non-terminated *Add "N" for non-normalled version Mechanical Shock: Per MIL-STD-202, Method 213, Test condition I Vibration: Per MIL-STD-202, Method 201 Insertion Force: 12 lbs. maximum Withdrawal Force: 3 lbs. minimum Life Cycle: 30,000 MATERIAL Housing: Zinc alloy, nickel plated Center Contacts: Copper alloy, gold plated Switching Springs: Copper alloy, gold plated Grounding Contacts: Copper alloy, gold plated BNC Insulators: Teflon Actuators: Thermoplastic, UL94V-0 rated ENVIRONMENTAL Operating Temperature: - 40C to 65C Storage Temperature: - 55C to 85C Thermal Shock: Per MIL-STD-202, Method 107 Moisture and Humidity: Per MIL-STD-202, Method 106 SMITH CHART (TYPICAL) RETURN LOSS (TYPICAL) RETURN LOSS (TYPICAL) FREQUENCY (MHz) FREQUENCY (MHz) DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 138 JACKS AND PLUGS MIL-TYPE 1/4" PHONE PLUGS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information MIL-TYPE 1/4" PHONE PLUGS 3-CONDUCTOR JACKS AND PLUGS 2-CONDUCTOR 420, 425 482, 483 430 480 (.206") 440, 445 484 (.206") FEATURES SPECIFICATIONS Designed for high quality communication equipment to meet military requirements, This series features one-piece tip rod and one-piece sleeve and plug body, assembled together into a mode as inserts, providing a finished plug with complete continuity of thermoplastic insulation between top rod and plug sleeve. Internal (invisible externally) interlock mechanically engages the metal and plastic components providing a realistic lock to prevent parts shifting. Design and material in accordance with MIL-P-642(A), MIL part number molded or stamped on handle, manufacturer's trademark (as required by MIL specification) appears on plug body. Tip Rod, Body and Screws: Copper alloy, natural finish. Terminals: Tinned copper alloy. Insulation: Thermoplastic, per MIL-P-22985, Type II, Class 1. Handles: Thermoplastic, Type 6, per MIL-M-20693, Type II. Shielded; machined from copper alloy, nickel-plated. STRAIN RELIEF CLAMP For MIL-type Littel-Plug phone plugs. P2380 conforms to Specification SC-A-7674-F - supplied with Plug Numbers 430, 440, 445 and 470. P2381 meets Specification MS-35762 - supplied with Plug Number 480 and Extension-Jax(R) phone jack, Number 820. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACKS AND PLUGS (R) LITTEL PLUG (R) PHONE PLUGS FAX: 773 792-2129 139 * Please visit the product pages on our website for the most up-to-date product information LITTEL PLUG(R) PHONE PLUGS Number 482NCP Number 485NC FEATURES AND BENEFITS SPECIFICATIONS * 3 conductor plug * Designed for high quality communication equipment * One-piece tip rod ensures electrical continuity * Brass plug finger versions meet MIL specifications * `N' and `NC' suffix versions have nickel-plated plug fingers, excellent for audio applications * `NC'' suffix option has rugged, heavy duty cable clamp, solder terminals for easier solderability and assembly. Metal shielded handle * `NCP" - plastic handle Plug Finger: Brass, natural finish or nickel-plated Terminals: Brass, electro-tinned Insulation: Ethyl cellulose, per MIL-P-22835, Type II, Class 1, or acetal resin Handles: Plastic-nylon molding plastic, Type 6, per MIL-M-20693, Type II. Shielded metal handle with red, black or nickel finish ORDERING INFORMATION 1. Order by part number. 2. Contact Switchcraft for more information. 3. Mating jacks available. PART NO. 482NC, 482NCP, 483NC, 483NCP, 485NC DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 JACKS AND PLUGS Number 483NCP 140 JACKS AND(R) PLUGS LITTEL PLUG PHONE PLUGS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information JACKS AND PLUGS LITTEL PLUG(R) PHONE PLUGS Part Number 482N Conductors 3 Terminals Screw Handle Red MIL Part Number None 482NC 3 Cable Clamp Shielded None 482NCP 3 Cable Clamp Red None 483N 3 Screw Black None 483NC 3 Cable Clamp Shielded None 483NCP 3 Cable Clamp Black None 485NC 3 Cable Clamp Shielded None Notes Plastic handle, nickel plated plug finger Red metal handle, nickel plated plug finger Plastic handle,nickel plated plug finger Plastic handle, nickel plated plug finger Black metal handle,nickel plate plug finger Black plastic handle, nickel plated plug finger Nickel plated handle,nickel plated plug finger 480 SERIES PART NUMBERING CHART Part 206" dia. number finger 480 * 482 482N 482NC 482NCP 483 483N 483NC 483NCP 484 * 485NC 1/4" dia. finger * * * * * * * * Brass finger * * Nickel finger * * * * * * * * * * Handle Material Plastic Plastic Plastic Metal Plastic Plastic Plastic Metal Plastic Plastic Metal Red handle Nickel handle * * * * Standard cable clamp * * * Large cable clamp * * * * * * * * * * * DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Black handle * * * * Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACKS AND PLUGS MIL-TYPE 1/4" PHONE PLUGS FAX: 773 792-2129 141 * Please visit the product pages on our website for the most up-to-date product information MIL-TYPE 1/4" TWIN PHONE PLUGS Number 411 Number 414 Number 415 Fingers of 414 are .25" diameter and mate with Switchcraft type MT389 Twin-Jax(R), MT333B, MT336 MT-Jax(R), and other jacks having .25" inside diameter sleeves and mounted on .625" centers. 415 has a .25" diameter finger and a .206" diameter finger to provide automatic polarization. Fingers mate with Switchcraft MT332B and MT342B MT-Jax, respectively. FEATURES Design and material strictly in accordance with Specification MIL-P-642(A), MIL part number molded or stamped on handle, manufacturer's trademark (as required in MIL Specification) appears on plug body. Ideal for use in broadcast and recording studios, military, industrial and telephone switchboard applications, instrumentation and telemetry. STRAIN RELIEF CLAMP Individual plugs, featuring one-piece tip rod and one-piece sleeve and plug body, with complete continuity of thermoplastic insulation between plug elements, are placed into handles to provide a double Twin-Plug(R) plug (two electrically-independent 2-conductor plugs spaced .625" center-to-center, with self-alignment feature). 411, 414 and 415 Twin-Plug plugs have provision for use of Cord Clamp Number S2674. 412 Twin-Plug has external Cord Anchor. Natural brass. For use only with 411, 414, 415 Twin-Plug, S2674. SPECIFICATIONS Tip, Rod, Ring Sleeve, Body, Screws: Copper alloy, natural finish. Number 412 Handle Screws - iridescent iridite overplating. Terminals: Tinned copper alloy. (Latest MIL Specifications no longer specify terminals; terminal furnished is the type referenced as TM-89). Insulation: Thermoplastic; per MIL-P-22985, Type II, Class 1. Handle: Thermoplastic on 411, 412, 414 and 415, per MIL-P-22985, Type II, Class 4. Molded black thermoset plastic per MIL-M-14F. 6-conductor Twin-Plug, 414 and 415, provide two electrically-independent 3-conductor plug fingers spaced on .625" centers. Fingers are insulated from each other and each provides tip, ring and sleeve connections. Black plastic handle is notched to indicate polarity. Accepts standard 6-conductor cables. Handle has provision for use of Cord Clamp, S2674. Part No. Conductors 411 2 412 2 414 3 415 3 Terminals Screw Screw Screw "Typical Mating Jack1" MT388 MT388 MT389 Screw MT332B &1, MT342B Mil No. M642/9-1 ----- --- Notes Provision for internal cord clamp (not included) MILPJ289. Similar to WECo289B 6-circuit plug, 2 electrically-independent 3 conductor fingers, .25" fingers. Provision for internal cord clamp (not included) Similar to WECo 338A. 425A-3 6-circuit plug, 2 electrically-independent 3 conductor fingers, one .25" finger, one .206" finger. Provision for internal cord clamp (not included) 1. Switchcraft Part Numbers. See Jacks Section for other mating jacks. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 JACKS AND PLUGS Number 412 142 JACKS AND PLUGS MIL-TYPE 1/4" EXTENSION JACKS AND TELEPHONE PATCH ADAPTERS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information MIL-TYPE 1/4" EXTENSION JACKS Number 820 FEATURES JACKS AND PLUGS Cable jack meets requirements of Specification MIL-J-641(A), Type Number JJ-026. Mates only with MIL-type plugs PJ-054 and PJ-540. Switchcraft 430. SPECIFICATIONS Body and Terminal Screws: Copper alloy, natural finish. Springs: Punched from special copper alloy. Stack Insulation: Rigid plastic spacers Rigid plastic tubing. Handle: Same as plug handle above. Stack Screws: Stainless steel. Part Number 820 Conductors 2 Typical Mating Plug1 430 Terminals Screw 2, 3 Handle Black Handle Part Number M1015 MIL Part Number M641/4-1 1. Switchcraft Part Number See Jacks Section for mating jacks. 2. Switchcraft replacement screw. P1070, Terminal P1069 (2 each required) 3. See previous page for strain relief clamp. TELEPHONE PATCH ADAPTERS TAD3 3-conductor TAD2 2-conductor FEATURES SPECIFICATIONS Compact patch adapters convert standard full-size phone jacks to standard miniature phone jack connections with maximum convenience and reliability at a minimum cost. Eliminates cross-patching problems and need for combination patch cords with standard phone plug on one end and a miniature phone plug on the other. Adapters are 100% compatible with Switchcraft(R) telephone type and military phone jacks and miniaturized tini-telephone patching system components, as well as equivalent industry standard phone plugs. Tip Rod, Ring, Sleeve Body and Screws: Copper alloy, natural finish. Insulation: Injection-molded plastic. Jack Springs: Formed copper alloy. Screw, Spring Retaining: TAD2 - #2-64, steel. Part Number P1616 (one required). TAD3 - #2-64, brass. Part Number P1070 (two required). Ring Insulations (TAD3 only): Kraft paper sleeve. Handle: Molded blue thermoplastic with die-stamped identification legend. TAD2 Handle, (Part Number M1487), and Retaining Screw, (Part Number T1677), one required. TAD3 Handle, (Part Number M1488), and Retaining Screw, (Part Number T1990), one required. TAD2 - 2-conductor adapter. Plug finger meets specifications for MIL plug PJ-047 (MIL-P-642). Fits Switchcraft T-Jax(R), M-Jax(R), MIL-approved MT-Jax(R), and other industry-standard phone jacks with .250" inside diameter sleeves. The .552" diameter handle accommodates jacks on .625" centers. For quick identification, TAD-2 is stamped on the blue handle - will not wear off with constant use. Miniature 2-conductor jack built into plug body, accepts miniature phone plugs with .173" diameter fingers, such as Switchcraft tini-telephone(R) plugs, Series TT200 and TT250, and other standard miniature telephone plugs. TAD3 is a 3-conductor version of TAD2. Finger configuration meets requirements of PJ-051 (MIL-P-642). Finger incorporates dead ring to minimize plug and jack wear. Blue handle has diameter of .444". DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACKS AND PLUGS MINIATURE TELEPHONE PLUGS FAX: 773 792-2129 143 * Please visit the product pages on our website for the most up-to-date product information MINIATURE TELEPHONE PLUGS TT253NC TT253 and TT254 TT251 and TT252 JACKS AND PLUGS Removing handle from plug body can be easily accomplished by lightly squeezing the knurled area of the handle and twisting 30 counter-clockwise. .173" MINIATURE PHONE PLUGS FEATURES 2- and 3-conductor miniature non-shorting telephone plugs designed for use with TT-Jax(R), Unijax(R), and other phone jacks with a .176" inside diameter bushing. Approximately 1/2 the size of standard phone plugs, yet retains the uniformity, dependability and quality of MIL-type phone plugs. TT-Plug(R) Miniature Telephone Plugs are the first to offer 2- and 3-conductors in an attachable type with twist handles for quick assembly. Series TT250 phone plug is available with red or black handles. Other color handles available on special order. Also available with nickel-plated plug fingers. (Add "N" to part number: 253N, 254N). The TT253NC and TT254NC offer the same nickel-plated plug fingers as the `N' versions, but also includes cable clamps and solder terminals for easy assembly. Plugs feature a one-piece tip rod, ring and a one-piece sleeve with integral plug body, assembled together into a mold as inserts. Providing complete continuity of thermoplastic insulation between tip rod, ring and sleeve. Internal interlock of all parts prevents shifting and shorting under extreme rugged usage. Internal 12-24 threads in end of plug body are intended for threading over outer jacket of a patch cord to provide a superior cable anchor. Part Number Conductors TT251 TT252 TT253 TT253N TT253NC Patch cords such as Switchcraft Series TT700 (or other .216" diameter cable) are easily attached to Series TT250 by screw terminals. FEATURES AND BENEFITS * * * * * Designed for pro audio applications 3 Conductor .173" (4.40mm) plug finger diameter One-piece tip rod ensures high reliability Complete continuity of thermoplastic insulation between conductors * Internal keying of all parts preventing shifting and shorting * Solder terminals for easier termination and assembly * Large cable clamp for shield termination and strain relief * Black or red handles SPECIFICATIONS Tip Rod, Ring, Sleeve and Body: Copper alloy, natural finish. Terminals and Terminal Screws: Copper alloy, natural finish. Insulation: Thermoplastic. Handle: Molded plastic Terminals Handle Color Handle Part Number 2 2 3 3 3 Screw Screw Screw Screw Solder Black Red Black Black Black T2302 T2315 T2307 T2324 T2324 TT254 TT254N TT254NC 3 3 3 Screw Screw Solder Red Red Red T2301 T2325 T2325 2P2003 3 Screw None None DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 Description Mil-type M642/13-1 Nickel-plated plug Nickel-plated plug, tinned solder terminals Mil-type M642/13-2 Nickel-plated plug Nickel-plated plug, tinned solder terminals 144 JACKS AND PLUGS .173" MINIATURE TELEPHONE PLUGS BANTAM TYPE PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information .173" MINIATURE TELEPHONE PLUGS BANTAM TYPE JACKS AND PLUGS FEATURES Miniature telephone twin plugs with two 2-conductor or two 3-conductor fingers, designed to mate with TT Twin-Jax(R), TT-Jax(R), and other phone jacks with a .176" inside diameter bushing and compatible tip and ring springs. Approximately 1/2 the size of standard phone plugs; yet retains uniformity, dependability of high-quality phone plugs. The phone plugs are exceptionally light, small and rugged. Plug fingers can easily be removed and replaced. * Minimum Space: Plugs fit .313" centers, horizontally or vertically. * Self-Aligning: Plug fingers compensate for minor variations in jack spacing. * Polarizing: Handle notches identify location of each finger. * Tip Monitoring: Handle ports permit probe insertion to monitor tip circuits. * Terminating and Looping Plugs: OEMs can fabricate cross-wired plugs, i.e., tip-to-sleeve, tip-to-ring, etc., according to individual requirements. OEMs can also wire-in resistors, RCL networks, etc. for standard and special terminating applications. Switchcraft will build looping and terminating TT-Twin Plugs on special order, where quantities warrant. * Sleeve Plugs: For looping, terminating and single cable applications, sleeve plugs seal off unused handle open-ing(s). Sleeve plugs also make a bridged (common) sleeve connection by holding braided shield in place in second plug.On special order, TT-Twin Plugs can be supplied with one 2-conductor finger and one 3-conductor finger. * Ease of Assembly/Disassembly: Refer to illustration below for assembly/disassembly procedure; no handle retaining screws required. Tip and ring terminations are screw-type screws supplied). SPECIFICATIONS Tip Rod, Ring, Sleeve and Body: Copper alloy, natural finish. Terminals and Terminal Screws: Copper alloy, natural finish. Insulation: Thermoplastic. Handle, Sleeve Plugs: Molded plastic. 1. DISASSEMBLY: Place plug on edge as shown. Push down and back on metal lip on finger (inside notch) with small screwdriver and slip plug finger out of handle. Turn plug over and repeat for other finger. TT263 TT261 TT261 TT263 TT263: 6-circuit plug consists of two electrically-independent 3-conductor fingers with black handle. Can use single or dual cables for two electrically-independent 3-conductor fingers or common tip, ring and/or sleeve circuits. Typical Part Mating Number 1 Cond. Terminals Jack 2 TT261 2 TT31 Screw 3 TT263 3 TT32B TT261: Two electrically-independent 2-conductor fingers in a black handle. Can be used with single or dual cables for independent tip circuits with common sleeve or separate sleeve circuits. 1. NOTCH 2. & 3. LIP BRAIDED SHIELD FINGER 4. LIP ON FINGER NOTCH GROOVE INTERNAL RIB 4. ASSEMBLY: Align grooves in fingers with internal handle ribs and insert fingers into rear of handle. Push fingers in until lips or rear of fingers snap into notches on handle. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com MIL Type Number - M642/13-3 1. TT-Twin Plug plugs can be supplied with one, 2-conductor plug finger and one, 3-conductor plug finger in the same handle (on special order). 2. Switchcraft Part Numbers. See additional mating jacks in this section. 3. Switchcraft Replacement screw P2240, Terminal P2642. 2 each required with 2-conductor twin plugs; 4 each required with 3-conductor twin plugs. 4. Replacement Hole Plug Switchcraft T2318 (Black) T2319 (Red). 2. CABLE INSTALLATION: Fold braided shield on cable back over insulation. Insert leads through rear of plug finger, and screw finger (clockwise) onto cable with twisting motion until lead terminations lineup with threaded tip and/or ring openings. Fasten terminals on both fingers with screws provided. 3. To bridge sleeves (common connection), place free end of braided shield in remaining finger sleeve opening. Press sleeve plug firmly in place. Handle Black Black Handle Part Number T2300-2 T2316 Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACKS AND PLUGS 1/4" COMMERCIAL PHONE PLUGS - LITTEL-PLUG (R) PLUGS (R) FAX: 773 792-2129 145 * Please visit the product pages on our website for the most up-to-date product information 1/4" COMMERCIAL PHONE PLUGS 2-CONDUCTOR LITTEL-PLUG(R) PLUGS Numbers 280, 281, 285, 285L, 288 (typical) Number 290 (typical) Number 260 (typical) 2-CONDUCTOR PLUGS PART NUMBERS FEATURES * Heavy duty machined copper alloy handle (shielded versions), tip and body for unsurpassed ruggedness. * Bright nickel plating on exterior surfaces will not chip or corrode. * Solder terminals are tin electroplated for ease of soldering. * One-piece tip rod staked into tip terminal ensures electrical continuity * Heavy duty cable clamp provides secure strain relief. * The proven industry standard phone plug for audio applications. Beware of imitations! * Shielded handle versions recommended for applications where electromagnetic interference and physical abuse may occur. SPECIFICATIONS Sleeve, Tip and Body: Nickel-plated copper alloy. Terminals: Solder lug - Tinned copper alloy. Screw: Tin-plated (screws size 3-48). Handles: Molded - black or red plastic. Shielded - machined Nickel-plated copper alloy. Tubular insulator inside handle. Part Number 240 C240 Terminals Screw 3 Screw 3 with Cable Clamp Screw 3 Screw 3 with Cable Clamp Solder Lug & Cable Clamp 245 C245 250 255 270 C270 Typical Mating Jack 2 Red Red 11 Black Red Shielded Shielded Shielded 1 Shielded 4 Shielded 4, 5 Shielded 1 Shielded 4, 5, 6 Solder Lug & Cable Clamp Solder Lug & Cable Clamp 2P1495 Handle Part Number M1002 Black Screw 3 Screw 3 with Cable Clamp 280 281 285 288 285L 2P1298 Handle* Black M1003 M1002 M1003 Handle: T10581 Insulator: A10071 T2323 Without Handle Screw 3 3-CONDUCTOR PLUGS PART NUMBERS No. 280 typical - shown with solder lug terminals, cord clamp and shielded handle. 260 267 269 290 Screw Solder Lug & Cable Clamp Screw 3 297 Solder Lug & Cable Clamp 2P1248 No. 280 typical - shown with screw-type terminals, plastic handle. Solder Lug & Cable Clamp 12B Black Black Red Shielded Shielded M1002 M1002 M1003 Handle: T10581 Insulator: A10071 Without Handle * Additional plug handle colors available (P2714) green, (M1111) blue, (M1235) gray. Fits any plug on which Numbers M1002, M1003 are standard. 1. Wide insulator between tip and sleeve allows use of 2-conductor plug in 3-conductor jack without shorting. 2. Switchcraft Part Numbers. See Mating Jacks Section. 3. Replacement Screw Part Number P10292 (2-conductor plugs require 2 screws; 3-conductor plugs require 3 screws). 4. Unassembled. 5. Larger cable clamp to accommodate larger diameter cables. 6. Handle has .375" (9.53mm) diameter hole to accommodate larger diameter cables. Special order only. Contact Switchcraft. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 JACKS AND PLUGS Numbers 240, 245, 250, 255 (typical) 3-CONDUCTOR LITTEL-PLUG(R) PLUGS 146 JACKS AND PLUGS 1/4" COMMERCIAL PHONE PLUGS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information JACKS AND PLUGS 1/4" COMMERCIAL PHONE PLUGS (continued) Switchcraft(R) commercial 2- and 3-conductor phone plugs are available with a logo handle in addition to the plain handle. The Switchcraft(R) name appears prominently on the shielded handle so the plugs can no longer be easily confused with "copycat" plugs found on the market today. Knurling on handles provides a convenient, positive fingertip grip for connect and disconnect. Plugs are available in the following popular variations: 1. 1/4" diameter finger, 2-conductors. 2. 1/4" diameter finger, 3-conductors. 3. .206" diameter finger, 2-conductors. Plug handles accept cable up to .290" diameter. SPECIFICATIONS Sleeve: Tip and Body: Plated copper alloy. Terminals: Solder lug: Copper alloy, electro-tinned; Screw: Tin-plated (screw size #3-48). Handles: Nickel-plated zinc (tubular insulator inside handle). PART NUMBERS NOTE: Plugs have 1/4" finger diameter unless otherwise specified. Logo Handle Plain Handle 2-CONDUCTORS 570 270 580 280 581 281 585 285 588 288 S580 S280 3-CONDUCTORS 590 290 597 297 598 298 Typical Mating Jack Description Screw terminals. Shielded handle. Solder lug & cable clamp. Shielded handle. Solder lug & cable clamp. Shielded handle. Unassembled. Solder lug & cable clamp. Shielded handle. Unassembled. Larger cable clamp accommodates larger cables. Solder lug & cable clamp. Shielded handle. Wide insulator between tip and sleeve makes possible use as a 2-conductor plug in 3-conductor jack without shorting. Solder lug & cable clamp. Shielded handle. Plug finger has .206" diameter. Screw terminals. Shielded handle. Solder lug & cable clamp. Shielded handle. Solder lug & cable clamp. Shielded handle. Locking feature. 11 S11 12B 12B, 133 1. Other mating plugs are available. 2. Replacement screw, Part Number P10292 (2-conductor requires 2 screws; 3-conductor requires 3 screws). No. 590 (Typical) No. 570 (Typical) DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACKS AND PLUGS 1/4" COMMERCIAL PHONE PLUGS FAX: 773 792-2129 147 * Please visit the product pages on our website for the most up-to-date product information 1/4" COMMERCIAL PHONE PLUGS (continued) 2-CONDUCTOR/PLASTIC OR SHIELDED HANDLES Number 170, 181 FEATURES Number 40 Number 40 Number 160 * 1-piece tip rod staked into tip terminal insures tightness of plug. * All essential conducting members are brass with external parts nickel-plated. * Terminal screws: broad-headed. In production quantities, screws may be eliminated and terminals hot-tinned for easier soldering of wire leads to terminals (special order). * Screw terminals have grooves which accommodate 1 or 2 cord tips. * Thermoplastic handle insert for greater insulation. * Plugs accept up to .25" maximum diameter cable (parallel or shielded cable). SPECIFICATIONS Sleeve, Tip and Body: Nickel-plated copper alloy. Terminals: Solder lug: copper alloy, electro-tinned. Screw: steel, tin-plated. Handles: Shielded: Nickel-plated copper alloy. Molded: black or red plastic. Part Number 40 Terminals Screw 703 Number 160 160 2P1251 (Replacement Screw Part No. P10013) 2 required 1701 182QB 182QBD 1843 Number 170 184L4 Typical Mating Jack2 Solder Lug & Cable Clamp Handle Black Shielded Shielded 11 or Z15J Without Handle Handle Part Number M1001 Handle: T10141 Insulator: A10063 Handle: T10451 Insulator: A10061 _ Shielded Handle: T112311 Insulator: A10064 Shielded Handle: T10141 Insulator: A11372 Shielded T2322 1. 2-piece shielded handle with built-in cable clamp for .25" diameter cable. Handles: Number T11231, handle; Number T11241, cap; see above for insulating tube; Number T1125, rubber washer. 2. Other mating plugs are available. 3. Handle has .380" (9.65mm) diameter hole to accommodate .375" diameter cable. 4. Handle has .451" (11.51mm) diameter hole to accommodate larger diameter cables. Number 184 DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 JACKS AND PLUGS Numbers 70, 184 Popular general purpose plug fits all standard jacks. Available in both 2- and 3-conductor types. Two-conductor plugs available with black or red molded plastic, or 3 different lengths of brass nickel-plated (shielded) handles. 2-Conductor Special Military Plugs are also available. 148 JACKS AND PLUGS SILENT-PLUG AND LUG (R) PLUG PHONE PLUGS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information SILENT-PLUG PHONE PLUGS JACKS AND PLUGS 2-CONDUCTOR PLUGS No. 172 Part Number Silent-Plug plugs have unique circuit-closing device-- stops hums, squeals and pops when plug is removed from jack. One-piece tip rod assembly insures plug quality. Utilizes cables up to .25" diameter (parallel or shielded cable). U.S. Patent No. 2,664,475. 172 Terminals Screw Typical Mating Jack (Replacement Screw Part No. P-1011-3) 2 required Handle Shielded Handle Part Number Two-Piece1 Ins. Tube A-1006-3 11 Two-piece1 Ins. Tube A-1137-1 SPECIFICATIONS Sleeve, Tip and Body: Nickel-plated copper alloy. Terminals: Copper alloy, tin-plated. Screw: Cadmium plated (screws size 3-48). Handles: Shielded machined copper alloy nickel-plated. Tubular insulator inside handle. 2-Conductor "Silent Plug", No. 172 181 182 Solder Lug and Cable Clamp Shielded2 T-1014-1 Handle, A-1137-2 Ins. Tube 1. 2-piece shielded handle with built-in cable clamp for .25" diameter cable. Handles: Number T1123-1, handle; Number T1124-1, cap; Number T-1125, rubber washer. 2. Mylar tube insulation for greater protection. No. 181 No. 182 LUG(R)-PLUG PHONE PLUGS 2-CONDUCTOR PLUGS Part Number 350 2P-1216 Nos. 350, 351, 355 No. 380 Terminals Typical Mating Jack1 Solder Lug 11 Shielded 380 Similar to Littel-Plug phone plug. Same molded handles as used on Littel-Plug; metal handle, bright nickel-plated, only 1" long. Fits all standard jacks. See drawing for details. SPECIFICATIONS Sleeve, Tip and Body: Nickel-plated copper alloy. Terminals: Solder lug: copper alloy, tin-plated. Screw: plated steel. Handles: Shielded: Nickel-plated copper alloy. Molded: black or red plastic. Handle Part Number M-1002 Handle: T-1060-1 Insulator: A-1007-2 1 Switchcraft part numbers. See Jacks Section for additional mating jacks. INSULATING TUBE ON #380 DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Handle Black Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACKS AND PLUGS AUDIO LOUDSPEAKER PLUGS AND HEAVY DUTY 1/4" PHONE PLUGS FAX: 773 792-2129 149 * Please visit the product pages on our website for the most up-to-date product information AUDIO LOUDSPEAKER PLUGS SERIES 187 Part Number Nickel Finish 187 187L 187D Black Finish 187B 187BL 187BD Cable Relief Typical Bushing Mating diameter (inch) Jack1 .3 to .33 (regular) .3 to .355 (large) 11 or Z15J .2 to .30 (small) 1. Other mating plugs are available. See Jacks Section. The 187 series 1/4" phone plugs are similar to the Switchcraft(R) 184 plugs, except that they offer an attractive tapered handle with a snap-in flex relief. Other features include: * Larger tip terminal to accommodate wire sizes up to 14 AWG. * Choice of Satin nickel or black finish. * Black flex relief bushing can be specified in three different cable diameter openings for maximum reliability of cable. * Plug is rated at 15A rms (maximum) for use with audio loudspeaker applications. SPECIFICATIONS Sleeve, Tip and Body: Nickel-plated copper alloy. Terminals: Solder lugs: tinned copper alloy; Screw: tin-plated. Handles: Die-cast zinc. Satin nickel or black finish. Cable Relief Bushing: Black (thermoplastic elastomer). HEAVY DUTY 1/4" COMMERCIAL PHONE PLUGS * Switchcraft's 188 is more heavy-duty than our competitor's biggest 1/4" commercial phone plugs. * Large curved tip solder terminal makes it easier to solder to heavy gauge wires. * Longer sleeve terminal allows more room to make sleeve solder connections. * Extra-large cable clamp securely grips cable of up to .450" in diameter. * Will easily accommodate some varieties of four conductor 14 gauge wire and parallel two conductor 12 gauge wire. * Bendable tab on sleeve terminal makes termination easier by holding down cable while soldering. In addition, such mechanical retention makes for a superior solder connection. * Will handle up to 15 A. rms (maximum). (continued on next page) SERIES 188 Plug DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 JACKS AND PLUGS Number 187BL (Typical) 150 JACKS AND PLUGS HEAVY DUTY 1/4" COMMERCIAL PHONE PLUGS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information HEAVY DUTY 1/4" COMMERCIAL PHONE PLUGS (continued) JACKS AND PLUGS SPECIFICATIONS Contact Resistance (typical *D.O.M.J.):< 0.020 ohms. Dielectric Withstand Voltage: 500 VAC (minimum). Insulation Resistance @ 500 VDC: 2,000 megohms (minimum). Insulation Resistance (after MIL-STD-202 Salt Spray): 1,000 megohms (minimum). Working Voltage: 250 VAC, 140 VDC. Current Carry @ Working Voltage For 188 Plug (typical *D.O.M.J.): 15.0 AMPS. Current Carry @ Working Voltage For 299 Plug (typical *D.O.M.J.): 6.0 AMPS. Insert/Withdrawal Force: *D.O.M.J.. Soldering Requirement: ANSI/J-STD-001. Temperature Range: -40 to + 85 Centigrade U.L. Component Recognition File No.: E118169. Life: *D.O.M.J. Maximum Cable Size For 188 Plug: 12 AWG stranded, up to .450" diameter. Maximum Cable Size For 299 Plug: .290" diameter. MATERIALS SERIES 299 PLUG Part Number 299 Maximum Cable Size Mating Jack .290" Diameter Z15J Tip: Nickel-plated copper alloy. Sleeve: Nickel-plated copper alloy. Handle: Nickel-plated copper alloy. Tip Terminal: Copper alloy, electro tin-plated. Cable Clamp: Copper alloy, electro tin-plated. Insulators For 188 Plug: Thermojet plastic, thermoplastic, thermoplastic film, P.P.O. Insulators For 299 Plug: Thermoplastic, thermoplastic film, glass epoxy. *D.O.M.J. - Dependent On Mating Jack DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACKS AND PLUGS 1/4" AND .206" COMMERCIAL PHONE PLUGS FAX: 773 792-2129 151 * Please visit the product pages on our website for the most up-to-date product information .206" COMMERCIAL PHONE PLUGS 3-CONDUCTOR/PLASTIC OR SHIELDED HANDLES PHONE PLUGS FOR POLARIZED CONNECTIONS .206" Diameter Number 190 Number 60 Numbers S250, S255 FEATURES For applications requiring polarization (use of plugs of different sizes) to prevent insertion of incorrect equipment Littel-Plug(R) phone plugs featuring a sleeve and tip diameter of .206" are available. Mate with Number S128 Extension Jax(R) and S11 Littel Jax(R) jacks. Number S260 used interchangeable with Military Type M642/51 (Switchcraft Number 480) plugs. Mate with jacks S12B, S13B, M444, MT342B, MT344B and others. Number 190A Part Number 60 90 190 Terminals Solder Lug 190A,190B & 190BL Typical Mating Jack2 12B Handle Black Shielded Shielded Shielded Handle Part Number M1001 T10451 Handle: T10141 Insulator: A10063 2-CONDUCTOR PLUGS PART NUMBERS Part Number S250 Terminals S280 Solder Lug & Cable Clamp 2-piece1 1. 2-piece shielded handle with built-in cable clamp for .25" diameter cable. Handles: Number T11231, handle; Number T11241, cap; Number A10064, insulating tube; Number T1125, rubber washer. 2. Other Mating Plugs are available. Special order only. Contact Switchcraft. S11 Handle Black Shielded Handle Part Number M1002 T10581 A10071 3-CONDUCTOR PLUGS PART NUMBERS S260 S267 Screw (Replacement Screw Part No. P10292) 2 required Solder Lug & Cable Clamp 1. Switchcraft(R) mating jacks. Number 60 Number 90 Typical Mating Jack1 Number S260 DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 S12B Black M1002 JACKS AND PLUGS 1/4" COMMERCIAL PHONE PLUGS (continued) 152 JACKS AND PLUGS 1/4" MITI-PLUG(R) AUDIO PLUGS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information JACKS AND PLUGS 1/4" MITI-PLUG(R) AUDIO PLUGS Number 174S FEATURES * 2-conductor phone plug with full shielding and resistance to extremely rough usage for electrified audio instruments such as amplifiers, synthesizers power heads and speaker systems requiring high-quality audio plugs. * 3-WAY CABLE STRAIN/STRESS RELIEF: For hours of trouble-free operation under heavy and abusive use. Plug body internally threaded for screw-on strain relief for cables from .29" to .30" diameter, and an additional clamp for additional relief (and for smaller cables). A heavy copper alloy-plated steel spring at point of entry to plug keeps cable from folding and pinching. Flex relief spring recommended for cables with diameters of .265" maximum only. * TERMINATING: Tip wire soldered to tip-braid folded back and secured with cable clamp. * IDENTIFICATION: Customer or OEM name of logo can be applied to plastic handles for a minimal charge for personalization. (Contact Switchcraft for details). * SPECIAL HANDLE COLORS: Plastic handles molded in custom colors on special order. Contact Switchcraft for details. No. 174S SPECIFICATIONS Tip Rod & Body: Copper alloy. Handle: Copper alloy or plastic (black). Flex Relief Spring: Plated spring steel. (Part No. P2848). Strain Relief Clamp: Plated steel. (Part No. P2380). Insulation: Thermoplastic, glass reinforced. No. 176S 2-CONDUCTOR PLUGS Part Number 173 174S 175 176S 177S 178 179 Handle Black plastic Copper Alloy Copper Alloy Black Plastic Red Plastic Black Plastic Red Plastic Flex Relief U-Clamp Spring None Spring Spring None None Typical Mating Jack1 11 Handle Part Number M1483 T2313 T2313 M1483 M1483 1. Other mating plugs are available. Special order only. Contact Switchcraft. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACKS AND PLUGS 1/4" FLAT PLUG PHONE PLUGS FAX: 773 792-2129 153 * Please visit the product pages on our website for the most up-to-date product information 1/4" FLAT PLUG PHONE PLUGS 2- OR 3-CONDUCTOR/SHIELDED HANDLE Part Typical Handle No. Terminal Mating Jack1, 2 Conductor Handle Part No. 228 Solder 11 2 Shielded S3067 238 Lug 12B 3 Series 230 1. Nickel plated steel handle. Two screws (Part Number P15823) required to mount handle. 2. Other mating plugs are available. 3. Accommodates cables from .219" outside diameter to .250" outside diameter Ideal for music equipment use. 3-CONDUCTOR/PLASTIC HANDLE .206" DIAMETER SLEEVE AND TIP Series S230 No. 238 FEATURES * Ideal where conventional long handled plugs are not suited to design of equipment. "Chassis-hugging" phone plugs allow cables to be brought out at right angles to equipment. * Removable plastic cap for easy assembly of wire leads to either screw or solder lug terminals. Adapter clips on types 220 and 225 make it convenient to clamp standard phone tips to terminals. * Terminals and body of plug mechanically interlocked, eliminating probability of any shifting. * Cover is black or red plastic; plug body is a rugged assembly of all metal parts. * One-piece tip rod staked into tip terminal to insure tightness, no disassembly of tip during use of plug. * High grade insulation. * Terminal identification permanently stamped into base plate adjacent to each terminal. Letter "T" denotes tip connection; "R" denotes ring sleeve; "S" terminal is the sleeve or body connection (no identification on types 228, 238). * Cover molds designed so customer's name or trademark inserts can be added. Call for details. SPECIFICATIONS Tip Rod and Sleeve: Nickel-plated copper alloy. Terminals: Tinned copper alloy. Handle: Black or red plastic. Numbers 228 and 238, steel,nickel-plated. Series 220 Part No. Terminals 230 Screw3 235 Screw 237 Solder 239 Solder S230 Screw3 Typical Mating Jacks1 12B S12B2 Handle Black Red Black Red Black Handle Part No.4 M1005 M1005 M1005 1. Switchcraft Part Number Other mating plugs are available. 2. Part Number S230 is the commercial version of military Type PJ068 (Switchcraft Number 480) plug. Mates with S12B, S13B, M444, MT342B, MT344B Jacks and others. Other mating plugs are available. For applications where it is desirable to polarize, use plugs of different sizes to prevent insertion of incorrect equipment. Sleeve and tip diameter of these plugs is .206" Mates with S830, S1230 Extension-Jax(R) jacks and S12B, S13B Littel-Jax(R) phone jacks. 3. Switchcraft Replacement Part Number P10292. 3 screws required. 4. Three screws (Number P1039) required to mount handle. Special order only. Contact Switchcraft. 2-CONDUCTOR/PLASTIC HANDLE Part No. 220 225 Terminals Screw Screw 227 Solder Lug 229 Solder Lug 2P1509 Screw Typical Mating Jack1 11 Handle Black Red Handle Part No.3 M1005 M1006 Black M1005 Red M1006 Less Handle - 1. Switchcraft Part Number; see jack section for additional mating jacks. 2. Switchcraft replacement Part Number P10292. 2 screws required per plug. Clips for phone tips. Part Number S1832. 3. Three screws (Number P1039) required to mount handle. Series 230 DIMENSIONS ARE FOR REFERENCE ONLY No. S-230 Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 No. 238 (typical) JACKS AND PLUGS Series 220 154 JACKS AND PLUGS RIGHT-ANGLE AUDIO PHONE PLUGS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information RIGHT-ANGLE AUDIO PHONE PLUG JACKS AND PLUGS FEATURING 3-PIECE CONSTRUCTION AND FAST TERMINATION/ASSEMBLY Switchcraft's 2- or 3-conductor right-angle audio phone plugs are designed for OEMs and users of commercial phone plugs. The plugs offer large terminals for easy wiring, and only three pieces to assemble - handle, insulator and finger/housing assembly and rugged reliability for stable, long-term, trouble-free operation. FEATURES * Easy Termination: Large terminals accept up to 16 AWG wiring (cables up to .25 inch diameter) * 3-Piece Assembly: Screw on the handle for quick and easy assembly; minimizes labor costs. * Rugged: All metal exterior construction. * Low Profile: Only 1/2 inch wide. Ideal for crowded, multi-channel panels. Right-angle handle minimizes space required behind equipment. * Knurled Handles: Positive grip during connect/disconnect. * Rugged Cable Clamp: Isolates pulling and twisting strains. SPECIFICATIONS 226 Part Number 236 226 Tip, Rod and Handle: Nickel-plated copper alloy. Housing/Sleeve: Nickel-plated. Tip Terminal: Tin-plated copper alloy. Sleeve (Clamp) Terminal: Tin-plated steel. Insulation: Thermoplastic. Dielectric Withstanding Voltage: 500 Vac. Insulation Resistance: 50,000 Megaohms minimum (initial). Operating Temperature: -20C to +65C. Description 3-conductor 1/4" right-angle commercial plug. Typical Mating Jack 12B, 13B 112B, 113B 2-conductor 1/4" right-angle commercial plug 11, 12A 111, 112A No. 236 DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACKS AND PLUGS 1/4" LOCK-EXTENSION JACKS AND PLUGS FAX: 773 792-2129 155 * Please visit the product pages on our website for the most up-to-date product information 1/4" LOCK-EXTENSION JACKS AND PLUGS Number 298 FEATURES SPECIFICATIONS Modified Littel-Plug(R) phone plug, 2- or 3-conductor, with coupling ring that can be threaded to thread projection of mating panel jack or to threaded end of the Lock-Extension Jax(R). Locks connection after plug has been fully inserted into its mating panel jack or Extension Jax(R). Lock-Plug Tip Rod, Body, Handle and Coupling Ring: Nickel-plated copper alloy. Terminals: Brass, electro-tinned. Solder lug design, cable clamp part of sleeve terminal. Insulation: Rigid plastic. Lock-Plug(R) makes proper contact to mating jack without tightening or attaching coupling ring, when rapid disconnect may be desired. Lock-Plug fits any standard jack with 3/8".-32 thread bushing with .094" of the bushing exposed. LockExtension Jax also will mate properly with standard phone plugs, where no "lock" requirement exists. LOCK-EXTENSION JAX(R) Housing (or Sleeve) and Handle: Nickel-plated copper alloy. TERMINALS: Sleeve: Plated steel. Tip and Ring: integral part of tip and ring springs. Springs: Spring tempered copper alloy. Insulation: Molded thermoplastic insert. Rigid plastic terminal washer. LOCK-PLUG Part Number 282 Cond. 2 298 3 Terminals Solder Lug & Cable Clamp Typical Mating Jack 12A Handle Part Number Notes 12B, 133 T10581 A10071 Similar to Switchcraft Number 297 Littel-Plug except with coupling ring. Typical Mating Plug Handle Part Number Notes 298 T1485 Sleeve terminal has cable clamp. Similar to Switchcraft Number 131 Extension-Jax(R). LOCK-EXTENSION JAX(R) Part Number Cond. 133 3 Terminals Solder Lug & Cable Clamp (R) 133 DIMENSIONS ARE FOR REFERENCE ONLY 282 Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 JACKS AND PLUGS Number 133 156 JACKS AND PLUGS 3.5MM HEAVY DUTY STEREO PLUG PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information JACKS AND PLUGS 3.5 MM HEAVY DUTY STEREO PLUGS RIGHT ANGLE 35HDBAU 3.5MM STEREO PLUGS FEATURES SPECIFICATIONS * Heavy duty 3.5mm plugs for audio, instrument, other applications. * Large cable clamps for rugged use. * Available in straight or right angle. * One piece tip rods for added durability. * Available in nickel, gold, and black finishes. * Large solder terminals for easy assembly. * Standard handle accommodates cable sizes up to 0.290" Optional `S' versions accommodate cable sizes up to 0.175" 35HDBN - Black Handle, Nickel Plug 35HDBAU - Black Handle, Gold Plug 35HDNAU - Nickel Handle, Gold Plug 35HDNN - Nickel Handle, Nickel Plug BENEFITS * * * * One piece tip rod with flat for easy solderability. Compliments current line of 3.5 mm jacks. Insert molded plug finger. Heavy Duty cable clamp provides better strain relief for larger cables * Longer cable clamp for easier plug assembly and more room for solder connections * Knurl on the back of handle provides ergonomic gripping surface to tighten plug * Tubular insulator included to prevent solder joints from contacting handle * Longer handle for improved gripping surface and easy plug withdrawal from jack * Large solder terminal for easy solderability MARKETS * Audio * Consumer electronic equipment * Broadcast studios * Home recording equipment * Audio cable assembly manufacturers * Instrumentation * Test equipment Contact Resistance: <0.020 ohms Dielectric Withstand Voltage: - 250 VAC (min.) Insulation Resistance @ 500 VDC: 2,000 megohms (min.) Working Voltage: - 250 VAC, 140 VDC Current Carry @ Working Voltage: 4 AMPS Insert/Withdrawal Force: - Typical 2.5/2 pounds Temperature Range: 0 to 66 Centigrade (operating) Passed MIL-STD-202F Method 107G (Thermal Shock), and Method 201 (Vibration) Life: - 5000 cycles Maximum Cable Size: - .250? dia. MATERIALS Tip Rod: Copper alloy, tin, or gold-plated Ring: Copper alloy, nickel, or gold-plated Sleeve: - Copper alloy, nickel, or gold-plated Handle: Copper alloy, nickel, or gold-plated Cable Clamp: - C.R.S., tin-plated Solder Terminal: Copper alloy, tin-plated Tubular Insulator: Clear plastic ORDERING INFORMATION 1. Order by part number 2. Contact Switchcraft for more information Part Number 35HDNN 35HDNNS 35HDBN 35HDBNS 35HDNAU 35HDNAUS 35HDBAU 35HDBAUS 35HDRANN 35HDRABAU 35HDRAAU DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Description Plug Finger Nickel Nickel Nickel Nickel Gold Gold Gold Gold Nickel Gold Gold Handle Nickel Nickel Black Black Nickel Nickel Black Black Nickel Black Nickel Notes 0.175" handle opening 0.175" handle opening 0.175" handle opening 0.175" handle opening Right angle Right angle Right angle Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACKS AND PLUGS .141" MINIATURE PHONE PLUGS FAX: 773 792-2129 157 * Please visit the product pages on our website for the most up-to-date product information FEATURES .141" MINIATURE PHONE PLUGS Number 750 SPECIFICATIONS Sleeve, Tip and Body: Nickel-plated copper alloy. Terminals: Copper alloy, electro-tinned. Solder lug or screw type (Screws #0-80). Handle: Molded black or red plastic. Copper alloy, nickel-plated. Part Number 740 745 750 755 2P1384 770 780 Number 780 No. 740 Terminals Typical Mating Jack1 Screw 2 Solder Lug & Cable Clamp Screw 2 Solder Lug & Cable Clamp No. 750 1. Other mating plugs are available. 2. Switchcraft replacement Part Number P1153. 2 screws required per plug. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 41 Handle Part No. Black Red Black Red Less Handle Shielded Shielded M1055 M1056 M1055 M1056 - T13631 T13631 JACKS AND PLUGS * Miniature 2-conductor Phone Plug for use with Switchcraft Tini-Jax(R) miniature phone jacks. About 1/2 the size of Switchcraft Littel-Plug(R) phone plug. Average net weight, 1/8 ounce. * Various terminal combinations: (a) Dual purpose sleeve terminal may be clamped over metal braid or shielded cables; provides cable anchor. Easily soldered for perfect electrical connection. (b) Screw terminal design (no cable clamp) for cable. Terminals that can be more suitably connected by screws. * 1-piece tip rod staked into mating terminals; no disassembly of tip during use of plug. Terminals and body of plug interlocked mechanically. * Available in black or red plastic handles or brass nickelplated handles for shielding. Can be used with cables up to .188" outside diameter. 158 JACKS AND PLUGS .097" SUBMINIATURE PHONE PLUGS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information JACKS AND PLUGS .097" SUBMINIATURE PHONE PLUGS Numbers 850, 880 Number 851 FEATURES MICRO-PLUG * Subminiature, 2-conductor phone plugs are 1/3 the size of standard phone plugs, with the uniformity, dependability, and quality construction of Switchcraft Littel-Plug(R) and Tini Plug(R) phone plugs. 50 W soldering with 60/40 solder recommended for terminating. * Switchcraft's 852, 853, 857, 858, 882 and 883 have a wider insulator between the tip and the sleeve. The wide insulator prevents the tip of the plug from shorting out between the tip spring and the sleeve of the jack during insertion. Micro-Plug(R) PLUG - Sleeve terminal incorporates cable clamp. May be clamped over mated braid to anchor shielded cable; solders readily for perfect electrical connection. Terminals and plug body interlocked mechanically. Accommodates cable up to .125" Combined length, handle and tip: 1.106" outside diameter, .250" outside diameter handle. LOCK Micro-Plug(R) PLUG - Similar to Micro-Plug plug, with addition of integral threaded collar that fastens to bushing of mating jack to prevent accidental disconnect. Requires at least .05" of exposed and usable thread on jack bushing to lock securely. Ideal for secure connections in critical medical and sensitive scientific instruments. Combined length, handle and tip: 1.046". Various molded cable assemblies incorporating Micro-Plug Subminiature phone plugs with plastic handles are available. Part Number 850 852 855 857 880 882 2P1419 Terminals Solder Lug Mating Jacks1 TR2A Handle Handle Part No. Black Black Red Red Natural Natural Less Handle T18623 T18623 T18622 T18622 T18621 T18621 - Handle Handle Part No. Black Black Red Red Natural Natural T23123 T23123 T23122 T23122 T23121 T23121 LOCK MICRO-PLUG Part Number 851 853 856 858 881 883 Terminals Solder Lug Mating Jacks1 TR2A 1. Switchcraft Part Numbers. Other mating plugs are available. SPECIFICATIONS MATERIALS Tip, Rod and Body (also integral Coupling Collar on Lock Micro-Plug): Nickel-plated copper alloy. Insulation: Molded thermoplastic. Sleeve Termination and Cable Clamp: Tinned copper alloy. Handle: Anodized aluminum; red, black or natural finish. No. 850 (typical) No. 851 (typical) MECHANICAL Life rating: 5,000 insertion/withdrawals. Insertion/Withdrawal Force: 1 pound (depending on mating jack). ELECTRICAL Insulation Resistance: > 100 megohms Dielectric Withstanding Voltage: 250V AC. ENVIRONMENTAL Thermal Range: -55C to +85C (non-operating); -20C to 65C (operating). Thermal Shock: Mil-Std 202, Method 107. Humidity: Mil-Std 202, Method 106. Salt Spray: Mil-Std 202, Method 101. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACKS AND PLUGS AUDIO ADAPTERS FAX: 773 792-2129 159 * Please visit the product pages on our website for the most up-to-date product information Part Number 332A (Not shown): 2-cond. phone jack input to old MC1M-style microphone connector output. Coupling ring can be screwed back to convert female microphone connector to male type. Shielded. AUDIO ADAPTERS 336A Part Number 336B: 2-conductor phone jack input to phono jack output. Shielded. Part Number 340: Two 2-conductor phone jack inputs connected in parallel to a 2-conductor phone plug output. Shielded. Part Number 345A: Phono plug input to a standard 2-conductor phone plug output. Shielded. Part Number 349A: Phono plug coupler. Phono Extension Jax(R) input to phono Extension Jax output. Shielded. 340 349A Part Number 352A: Stereo to monaural adapter. 3-conductor phone jack input to 2-conductor phone plug output. Extra-wide insulator prevents accidental damage should wrong connection be made. Shielded. Part Number 361A: Phone plug coupler. Standard 1/4" inside diameter phone jack input to standard 1/4" inside diameter phone jack output. Ideal for connecting two cables terminated with 2-conductor phone plugs. Shielded. 345A 361A 352A Part Number 362A (Not shown): Phone plug coupler. Standard 3-cond. phone jack input to standard 3-cond. phone jack output. Ideal for connecting two cables terminated with 3-conductor phone jacks. Shielded. Part Number 363: Phone jack coupler. Standard 1/4" 2-conductor phone plugs at each end to connect two cables terminated with phone Extension Jax. Shielded. 364A 363 Part Number 364A: EIA Standard 2-conductor Tini-Jax(R) phone jack input to a standard 1/4" 2-conductor phone plug output. Shielded. Part Number 365: EIA Standard 2-conductor Tini-Jax(R) phone jack input to a phono plug output. Shielded. Part Number 370A: 2-conductor EIA Standard Tini-Plug(R) phone plug (.141" diameter finger) output to phono jack input. Adapts standard phono plug to small Tini-Plug. Shielded. 370A 365 Part Number 374: 2-conductor phone jack input to a 2-conductor EIA Standard Tini-Plug (.141" diameter finger) phone plug output. Adapts standard phone plug to small Tini-Plug. Part Number 376: EIA Standard Tini-Jax phone jack input to a 2-conductor Micro-Plug (.097" diameter finger) phone plug output. Adapts a Tini-Plug phone plug to a Micro-Plug phone plug. 376 374 Part Number 377: Micro-Jax phone jack input to a 2-conductor EIA Standard Tini-Plug (.141" diameter finger) phone plug output. Adapts a Micro-Plug phone plug to a Tini-Plug phone plug. Special order only. Contact Switchcraft. 377 DIMENSIONS ARE FOR REFERENCE ONLY SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 Inch (mm) JACKS AND PLUGS 336B Part Number 336A: 2-conductor phone jack input to a phono plug output. Shielded. 160 JACKS AND PLUGS PHONO PLUGS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information PHONO PLUGS JACKS AND PLUGS 3502RABAU 35581 3501M 3501MC 35585 3502A 3502AAU 3502RAAU 3502 35582 3504M 3507 3502ABAU 3502RA FEATURES * Wide variety of styles for a wide range of applications. * 3502A and 3502RA Series offer solid pin, large solder cups. * 3558 Series utilize plastic handles for low cost applications. * 3507 and 3504M have low-loss nylon insulators for RF applications. Can be used at 1 kW at 30 MHz. * 3501M and 3501MC have the handle removed for tight spaces * Options include nickel and gold plated, or black epoxy finishes. SPECIFICATIONS MATERIALS Pin: Nickel or gold plated, copper alloy Sleeve: Nickel or gold plated, copper alloy Handle: Nickel or gold plated, or black epoxy finish, copper alloy (3558 Series: Thermoplastic) Cable Clamp: Tin, copper alloy Insulator: Rigid Plastic ELECTRICAL Current Carry @ Working Voltage (typical *D.O.M.J.): 6A Contact Resistance (typical *D.O.M.J.): < 0.20 Ohms Dielectric Withstanding Voltage: 500 VAC min. Insulation Resistance @ 500VDC: 2,000 megohms min Working Voltage: 250VAC, 140VDC MECHANICAL Life: *D.M.O.J Temperature Range: -40 C to +85 C *D.M.O.J. -Dependent On Mating Jack DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACKS AND PLUGS PHONO PLUGS FAX: 773 792-2129 161 * Please visit the product pages on our website for the most up-to-date product information PHONO PLUGS (continued) JACKS AND PLUGS 3501M & 3504M 35581, 33582, 33585 3501MC 3502 3502A 3507 3502RA Part Number 3502A 3502AAU 3502ABAU 3502RA 3502RABAU 3502RAAU 35581 35582 35585 3502 3501M 3501MC 3504M 3507 330F1 330F2 Description Pin Nickel Gold Gold Nickel Gold Gold Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Typical Handle Nickel Nickel Black Nickel Black Nickel Plastic Plastic Plastic Nickel Nickel Notes Right angle Right angle Right angle Red handle Black handle White handle Same as 3501M except with cable clamp Same as 3507 less cable clamp and handle For RF applications 2 inline jacks to 1 male plug, 4" gray shielded cable 1 inline jack, 1 male plug to 1 male plug, 4" gray shielded cable DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 Mating Jack BP Series BP Series BP Series BP Series BP Series BP Series BP Series BP Series BP Series BP Series BP Series BP Series 3505F 3505F BP Series BP Series 162 JACKS AND PLUGS MINIATURE POWER PLUGS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information MINIATURE POWER PLUGS JACKS AND PLUGS 760 860 760K S760K 761K FEATURES AND BENEFITS * 2-conductor power jacks. * Hollow center pin available in 3 pin diameters and 2 finger lengths (See chart below). * Locking option available for added security in critical applications. * Molded plastic handles available in black or red. * Sleeve terminal serves as cord clamp. INSIDE DIAMETER TOLERANCES (PLUGS) .050" (.050 - .053) 860/865: 1.27mm (1.27 - 1.35) .080" (.080 - .084) S760/S765*: 2mm (2.03 - 2.13) .100" (.099 - .103) 760/765*: 2.5mm (2.52 - 2.61) SPECIFICATIONS Plug Sleeve and Pin: Nickel-plated copper alloy. Lockring: Nickel-plated copper alloy. Lockring Thread Size: 5/16 - 32 UNEF 2B. Finger Insulator: Molded plastic. Insulating Washers: Rigid plastic. Sleeve Terminal: Copper alloy, electro-tinned. Handle: Molded plastic. Handle Thread Size: 5/16 - 24 UNF 2B. Electrical: Current (Carry): 5 amps. OUTSIDE DIAMETER TOLERANCES (PLUGS) .150" (.149 - .153) 860/865: 3.81mm (3.78 - 3.89) .218" (.217 - .221) S760/S765*: 5.5mm (5.51 - 5.61) .218" (.217 - .221) 760/765*: 5.5mm (5.51 - 5.61) ORDERING INFORMATION 1. Order by part number. 2. Contact Switchcraft for more information. 3. Indicates "special order" only. *includes locking (k) versions PART NUMBERING and MATING CHART (Power plugs/Power jacks) Tip Outside Length Length Locking Inside Part "L2" Feature Insulator Number Diameter Diameter "L1" Handle Color Handle Part Number Switchcraft (R) Mating Jack1 760 .100" .218" .375" 1.42 No Black Black M1055 712A, RAPC712, RASH712, RASM712, PC712A, RA712A 765 .100" .218" .375" 1.42 No Black Red M1056 712A, RAPC712, RASH712, RASM712, PC712A, RA712A 760K .100" .218" .375" 1.7 Yes Black Black M1055 712A, PC712A 761K .100" .218" .475" 1.8 Yes Black Black M1055 L712A, PCL712A 765K .100" .218" .375" 1.7 Yes Black Red M1056 712A, PC712A 766K .100" .218" .475" 1.8 Yes Black Red M1056 L712A, PCL712A 2P1515 .100" .218" .375" 1.42 No Black No Handle No Handle 712A, PC712A S760 .080" .218" .375" 1.42 No White Black M1055 722A, RAPC722, RASH722, RASM722, PC722A, RA722A 722A, RAPC722, RASH722, RASM722, PC722A, RA722A S765 .080" .218" .375" 1.42 No White Red M1056 S760K .080" .218" .375" 1.7 Yes Black Black M1055 722A, PC722A S761K .080" .218" .475" 1.8 Yes Black Black M1055 L722A, PCL722A S765K .080" .218" .375" 1.7 Yes Black Red M1056 722A, PC722A S766K .080" .218" .475" 1.8 Yes Black Red M1056 L722A, PCL722A 2P1624 .080" .218" .375" 1.42 No White No Handle No Handle 722A, PC722A 860 .050" .150" .375" 1.42 No Black Black M1055 RAPC 732, RASH 732, RASM 732 865 .050" .150" .375" 1.42 No Black Red M1056 RAPC 732, RASH 732, RASM 732 1See pages 130-134. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACK PANELS PROFESSIONAL PUNCHDOWN TERMINAL FAX: 773 792-2129 163 * Please visit the product pages on our website for the most up-to-date product information PROFESSIONAL PUNCHDOWN TERMINAL (PPT) JACK PANELS Our Patchbays Now Feature the New Professional Punchdown Terminal (PPT) Our Patchbays Have Just Rounded A New Corner Actually, the corners we rounded belong to our patchbays' revolutionary, new Professional Punchdown Terminal (PPT), making it perfectly compatible with the industry standard. We realized that achieving a new industry standard meant we couldn't cut any corners to get there. The PPT design incorporates a split-barrel design and a more rugged, thicker housing to minimize the impact of repeated punchdowns. The split-barrel design eliminates the problems associated with the old "V-shaped" terminal designs. The PPT design distributes pressure evenly across both sides of the terminated wire, causing improved wire retention plus more reliable connections. The serrated teeth in the plastic housing firmly grip the wires, which also greatly improves wire retention. With the PPT, multiple wires can be terminated to a single contact, and a wide range of wire gauges can be used. Look for Switchcraft's PPT in our MTP and TTP Series of audio patchbays, and in our new Backpanel Series. All Switchcraft audio patchbays incorporate heavy gauge materials and our high quality nickel-plated, steel framed jacks. Gold-plated, crossbar contacts come standard! MATERIALS Housing: Thermoplastic (UL 94V-0) Contacts: High strength copper alloy, tin plated Wire size: Accommodates #22, 24, or 26 AWG, stranded or solid Accessories Part Number K459 Description PPT replacement kit consists of 15 of each color* (IDC/IDC) K460 PPT replacement kit consists of 15 of each color (IDC/wirewrap) PT1LA PPT impact punchdown tool PT2B Replacement bit for PT1LA tool *Colors consist of red, black, white, yellow, blue, and orange. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 164 JACK PANELS FRONT ACCESS MTPFA/TTPFA SERIES PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information JACK PANELS FRONT ACCESS MTPFA/TTPFA SERIES TTPFA96K1NS The Front Access Series offers the end user the ease of re-terminating patchpoints from the front of the rack as opposed to the back. A slide out tray allows the user to slide out the punchdown terminals, and reconfigure the unit. An easy release mechanism on either side of the unit allows it to be pushed back into place and easy to grip locking nuts tighten the unit in place. SPECIFICATIONS MATERIALS (JACKS) FEATURES AND BENEFITS PANEL * Easy slide-out tray slides forward for easy re-termination from the front of the rack * Available with either 48 MT style or 96 TT style jacks in a 1RU space * Attractive, corrosion resistant nickel-plated, steel frame jacks * Gold-plated switching contacts reduce contact resistance, improves reliability * Extra wide designation strips for easy channel identification * Rugged, attractive black epoxy-finished steel chassis * Configurations available include normals strapped and normals brought out Frame: C.R.S. black epoxy painted Designation Strips: Black polycarbonate 94V-0 Designation Strip Covers: Clear polycarbonate Jack Inserts: Thermoplastic 94V-0 Frame: Nickel-plated steel Bushing: Nickel-plated brass Tip, Ring and Shunt Springs: Nickel silver with welded contacts Assembly Screws: Nickel-plated steel Welded Contacts: Gold alloy MECHANICAL Life: 30,000 cycles Insertion Force: 7 lbs. maximum Withdrawal Force: 1 lb. minimum Operating: -20C to +65C ELECTRICAL Jack Contact Resistance: 30 milliohms initial maximum; 50 milliohms after life Jack Insulation Resistance: 10,000 megohms maximum Dielectric Withstanding Voltage: 500V at 60 Hz AC Working Voltage: 100 milliamps or less; maximum 56.5 VDC Ordering Information Part Type of No. of Number Jack Jacks Description TTPFA96K1NS TT 96 1.75" High, normals strapped TTPFA96K1NO TT 96 1.75" High, normals brought out MTPFA48K1NS MT 48 1.75" High, normals strapped MTPFA48K1NO MT 48 1.75" High, normals brought out DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACK PANELS FRONT ACCESS MTPFA/TTPFA SERIES FAX: 773 792-2129 165 * Please visit the product pages on our website for the most up-to-date product information FRONT ACCESS MTPFA/TTPFA SERIES (continued) JACK PANELS DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 166 JACK PANELS MTP48K WIRED AUDIO SERIES PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information JACK PANELS MTP48K WIRED AUDIO SERIES The MTP Series were developed with the AES/EBU digital standard in mind. All versions are made with 110 Ohm cabling inside as a standard. Available in a wide variety of configurations. MTP48K3NO FEATURES AND BENEFITS MECHANICAL * Unit features 48 MT style jacks in either 1RU (1.75"H) or 2RU (3.5"H) spaces * All versions utilize AES/EBU wiring for complete digital compatibility * Attractive, corrosion resistant nickel-plated, steel frame jacks * Gold-plated switching contacts reduce contact resistance, improve reliability * Rugged, attractive black epoxy-finished steel chassis * Extra wide designation strips for easy channel identification * 1RU version configurations include normals strapped and normals brought out * 2RU version configurations include normals strapped, normals brought out, and sleeve normals brought out Life: 30,000 cycles Insertion Force: 7 lbs. maximum Withdrawal Force: 1 lb. minimum Environmental: OC to +50C ELECTRICAL Contact Resistance: 30 milliohms maximum initial Insulation Resistance: 10,000 megohms maximum Dielectric Withstanding Voltage: 500 VAC at 60 Hz Working Voltage: 140 VDC maximum Current Rating: 100 milliamps SPECIFICATIONS MATERIALS JACKS Frame: Nickel-plated steel Bushing: Nickel-plated brass Tip, Ring and Shunt Springs: Nickel silver with welded contacts Assembly Screws: Zinc-plated steel Welded Contacts: Gold alloy PANEL Front Channel: Black anodized aluminum Frame: C.R.S. black epoxy painted Designation Strips: Black polycarbonate 94V-0 Designation Strip Covers: Clear polycarbonate Jack Inserts: Thermoplastic polyester Ordering Information Part Type of No. of Number Jack Jacks MTP48K1NS MT 48 MTP48K3NS MT 48 MTP48K1NO MT 48 MTP48K3NO MT 48 MTP48K3SNO MT 48 DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Description 1.75" High, normals strapped 3.5" High, normals strapped 1.75" High, normals brought out 3.5" High, normals brought out 3.5" High, sleeve normals out Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACK PANELS MTP48K WIRED AUDIO SERIES FAX: 773 792-2129 167 * Please visit the product pages on our website for the most up-to-date product information MTP48K WIRED AUDIO SERIES (continued) JACK PANELS DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 168 JACK PANELS TTP96K WIRED AUDIO SERIES PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information JACK PANELS TTP96K WIRED AUDIO SERIES TT96K3NS The TTP96K Series was developed with the AES/EBU digital standard in mind. As a standard the TTP96K utilizes 110 Ohm cabling inside. FEATURES AND BENEFITS MECHANICAL * Unit features 96 TT style jacks in 2RU (3.5"H) space * Utilizes AES/EBU wiring for complete digital compatibility * Attractive, corrosion resistant nickel-plated, steel frame jacks * Gold-plated switching contacts reduce contact resistance, improve reliability * Rugged, attractive black epoxy-finished steel chassis * Extra wide designation strips for easy channel identification Life: 30,000 cycles Insertion Force: 7 lbs. maximum Withdrawal Force: 1 lb. minimum Environmental: OC to +50C ELECTRICAL Contact Resistance: 30 milliohms maximum initial Insulation Resistance: 10,000 megohms maximum Dielectric Withstanding Voltage: 500 VAC at 60 Hz Working Voltage: 140 VDC maximum Current Rating: 100 milliamps SPECIFICATIONS MATERIALS JACKS Frame: Nickel-plated steel Bushing: Nickel-plated brass Tip, Ring and Shunt Springs: Nickel silver with welded contacts Assembly Screws: Zinc-plated steel Welded Contacts: Gold alloy PANEL Front Channel: Black anodized aluminum Frame: C.R.S. black epoxy painted Designation Strips: Black polycarbonate 94V-0 Designation Strip Covers: Clear polycarbonate Jack Inserts: Thermoplastic polyester Ordering Information Part Type of No. of Number Jack Jacks TTP96K3NS TT 96 DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Description 3.5" High, normals strapped Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACK PANELS TTP96K WIRED AUDIO SERIES FAX: 773 792-2129 169 * Please visit the product pages on our website for the most up-to-date product information TTP96K WIRED AUDIO SERIES (continued) JACK PANELS DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 170 JACK PANELS MTPH/TTPH HARNESS AUDIO SERIES PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information JACK PANELS MTPH/TTPH HARNESS AUDIO SERIES The MTPH and TTPH Harness Series utilize standard front panel assemblies, a 4 foot cable harness, and our standard back panel assemblies. Available in a wide variety of configurations, all are terminated to our PPT's on the back panel. Primarily used where the back panels must either be mounted into a rack, or brought back to the front for easier access. Custom cable lengths can also be supplied. Contact the factory for details. MTPH48K3NO FEATURES AND BENEFITS PANEL * Units feature either 48 MT style jacks or 96 TT style jacks on the front panels, to a 4 foot harness, out to a backpanel with PPT's * All versions utilize AES/EBU wiring for complete digital compatibility * Attractive, corrosion resistant nickel-plated, steel frame jacks * Gold-plated switching contacts reduce contact resistance, improve reliability * Rugged, attractive black epoxy-finished steel frame chassis * Extra wide designation strips for easy channel identification Front Channel: Black anodized aluminum Frame: C.R.S. black epoxy painted Designation Strips: Black polycarbonate 94V-0 Designation Strip Covers: Clear polycarbonate Jack Inserts: Thermoplastic polyester SPECIFICATIONS MATERIALS JACKS MECHANICAL Life: 30,000 cycles Insertion Force: 7 lbs. maximum Withdrawal Force: 1 lb. minimum Environmental: OC to +50C ELECTRICAL Frame: Nickel-plated steel Bushing: Nickel-plated brass Tip, Ring and Shunt Springs: Nickel silver with welded contacts Assembly Screws: Zinc-plated steel Welded Contacts: Gold alloy Contact Resistance: 30 milliohms maximum initial Insulation Resistance: 10,000 megohms maximum Dielectric Withstanding Voltage: 500 VAC at 60 Hz Working Voltage: 140 VDC maximum Current Rating: 100 milliamps DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACK PANELS MTPH/TTPH HARNESS AUDIO SERIES FAX: 773 792-2129 171 * Please visit the product pages on our website for the most up-to-date product information MTPH/TTPH HARNESS AUDIO SERIES (continued) Ordering Information Part Number MTPH48K1NS No. of Jacks 48 MTPH48K1NO MT 48 MTPH48K3NS MT 48 MTPH48K3NO MT 48 MTPH48K3SNO MT 48 TTPH96K1NS TT 96 TTPH96K1NO TT 96 TTPH96K3NS TT 96 TTPH96K3NO TT 96 Description 1.75" High front panel, 4' Harness, 3.5" High back panel, normals strapped 1.75" High front panel, 4' Harness, 3.5" High back panel, normals brought out 3.5" High front panel, 4' Harness, 3.5" High back panel, normals strapped 3.5" High front panel, 4' Harness, 3.5" High back panel, normals brought out 3.5" High front panel, 4' Harness, 3.5" High back panel, sleeve normals brought out 1.75" High front panel, 4' Harness, 3.5" High back panel, normals strapped 1.75" High front panel, 4' Harness, 5.25" High back panel, normals brought out 3.5" High front panel, 4' Harness, 3.5" High back panel, normals strapped 3.5" High front panel, 4' Harness, 5.25" High back panel, normals brought out See Page 172 for Mechanical Drawings DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 JACK PANELS Type of Jack MT 172 JACK PANELS MTPH/TTPH HARNESS AUDIO SERIES PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information JACK PANELS MTPH/TTPH HARNESS AUDIO SERIES (continued) TTPH96K1 SERIES FRONT VIEW TTPH96K3 SERIES FRONT VIEW MTPH48K1 SERIES FRONT VIEW MTPH48K3 SERIES FRONT VIEW TOP ROW TOP ROW TOP ROW BOTTOM ROW BOTTOM ROW NORMALS AT JACKS BOTTOM ROW NORMALS OUT DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com FULL SLEEVE NORMALS OUT Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACK PANELS MTPH/TTPH HARNESS AUDIO SERIES FAX: 773 792-2129 173 * Please visit the product pages on our website for the most up-to-date product information MTPH/TTPH HARNESS AUDIO SERIES (continued) JACK PANELS MTPH48K1NS & MTPH48K3NS REAR VIEW MTPH48K1NO & MTPHK3NO REAR VIEW MTPH48K1SNO & MTPH48K3SNO REAR VIEW TTPH96K1NS & TTPH96K3NS SERIES REAR VIEW TTPH96K1NO & TTPH96K3NO SERIES REAR VIEW DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 174 JACK PANELS MTPBP/TTPBP BACKPANEL SERIES PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information JACK PANELS MTPBP/TTPBP BACKPANEL SERIES MTPH48K3BPNS The Backpanel Series offers the end user the flexibility of configuring their own patchbay, or to use as a central patchpoint location. The backpanels utilize the PPT punchdown and come with a rugged cable tray. FEATURES AND BENEFITS MATERIALS * Allows for custom patchbay configurations or central patching points * PPTs have IDCs on both sides for easy installation * Rugged, attractive black epoxy-finished steel chassis * Cable trays allow for mounting and securing terminated cable Housing: Thermoplastic (UL 94V-0) Contacts: High strength copper alloy Backpanels: Black Epoxy coated C.R.S. Cable Tray: Black Epoxy coated C.R.S. Ordering Information Part Sets of Number PPT Terminals MTP48K3BPNS 48 MTP48K3PBNO 48 MTP52K3BPNO 52 MTP24K7 24 x 2 TTP96K3BPNS 96 TTP96K5BPNS 96 x 2 SPECIFICATIONS Panel thickness: .093" Mounting hole diameter: .187" Mounting hole spacing (48 IDCs/row): .340" (Horizontal) x .275" (Vertical) Mounting hole spacing (52 IDCs/row): .320" (Horizontal) x .275" (Vertical) Wire size: #22, 24, 26 AWG Stranded or Solid (IDC termination) DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Height 3.5" 3.5" 3.5" 7.0" 3.5" 5.25" Description T, R, S T, R, S, TN, RN T, R, S, TN, RN +, -, S T, R, S T, R, S, TN, RN Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACK PANELS MTPBP/TTPBP BACKPANEL SERIES FAX: 773 792-2129 175 * Please visit the product pages on our website for the most up-to-date product information MTPBP/TTPBP BACKPANEL SERIES (continued) JACK PANELS NOT ALL IDC CONNECTORS SHOWN FIGURE A (MTP48K3BPNN SHOWN) NOT ALL IDC CONNECTORS SHOWN FIGURE B (TTP96K5BPNO SHOWN) DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 176 JACK PANELS EZ NORM PATCHBAY SERIES PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information JACK PANELS EZ NORM PATCHBAY SERIES Center Strip Removes For Normalling Access Easily Normal The Jacks By Rotating To "Full", "Non", Or "Half" Positions The EZ Norm offers a simplified method for setting up and changing normals to a Bantam/TT patchbay. Simply remove the middle designation strip, and rotate the center cam, using a standard screwdriver. An audible"click" can be heard as you rotate from full normals to no normals to half normals. An opaque marking strip is included to conceal the normal position, if needed. EZ NORM JACK SPECIFICATIONS MATERIALS: Housing & Cover: 94V-0 rated thermoplastic Sleeve Collar: Nickel plated copper alloy Tip, Ring, Shunt, & Sleeve Springs: Nickel Silver with welded contacts Welded Contacts: Gold Cam Switching Springs: Silver plated copper alloy Cam Switching Contacts: Silver plated copper alloy ELECTRICAL: Jack Spring Contact Resistance: 30 milliohm Maximum Cam Switch Contact Resistance: 30 milliohm Maximum Insulation Resistance: 10,000 Megaohms Dielectric Withstanding Voltage: 500 VAC (rms) at 60 Hz Insertion Loss: -0.5dB up to 10 MHz EZ NORM PATCHBAY OPTIONS * 1RU can be terminated to EDAC or Cannon DL, solder terminals, or wire-wrap terminals * 1.5RU can be terminated to EDAC/Cannon DL, solder terminals, wire-wrap terminals, plus 3 pin connectors, or our own PPT Professional Punchdown Terminal * 2RU Same as above * All units will be offered with or w/o docking connector * Unwired units will be offered with either cable tie bar or cable tray MECHANICAL Jack Mechanical Life: 30,000 cycles Cam Contact Mechanical Life: 30,000 cycles Insertion - Withdrawal Forces: 1 - 4 lbs. Moisture resistance: MIL-STD 202 Method 106 Thermal shock: MIL-STD 202 Method 107 Salt spray: MIL-STD Method 101 (48 hrs.) Vibration: MIL-STD 202 Method 213 DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACK PANELS EZ NORM PATCHBAY SERIES FAX: 773 792-2129 177 * Please visit the product pages on our website for the most up-to-date product information EZ NORM PATCHBAY SERIES (continued) Racks The EZ Norm comes in 3 different rack heights, 1RU, 1.5RU, and 2 RU. JACK PANELS Harness Assembly The EZ Norm is also offered as a harness assembly, with a standard harness of 4 ft. Custom lengths are available, call Switchcraft(R) for details. 10 15 20 _ P _ D E90 E56 E38 IDC 3PIN WW SL CDL FA UNWIRED PRE WIRED NO DOCKING DOCKING CONNECTOR EDAC/ELCO 90 PIN CONNECTOR EDAC/ELCO 56 PIN CONNECTOR EDAC/ELCO 38 PIN CONNECTOR IDC PPT TERMINALS 3 PIN CONNECTORS WIRE WRAP PINS SOLDER LUGS CANNON DL 96 PIN CONNECTORS FRONT ACCESS WITH PPT NO REAR SUPPORT CABLE TRAY CABLE BAR _ P _ D E90 E56 E38 IDC 3PIN WW SL CDL FA _ T B REGULAR UNIT HARNESS UNIT (UMBILICAL) 1 RACK UNIT HEIGHT 1.5 RACK UNIT HEIGHT 2 RACK UNIT HEIGHT _ H 10 15 20 } } } EZ-NORM CAM JACKS EZN } TT SIZE JACKS TT _ T B } _ H UNWIRED ONLY EZN } TT DIMENSIONS ARE FOR REFERENCE ONLY Front Access The Front Access option offers a slide-out tray, allowing the end user to re-terminate the patchbay from the front of the rack. Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 178 JACK PANELS TT96 EDAC SERIES PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information JACK PANELS TT96 EDAC SERIES TT96EDACNS The TT96EDAC Series offers the convenience of EDAC(R) connectors on the back of the panel for easy installation. Available in normals strapped and normals brought out, both wired to the SAC code of wiring. We also offer custom wiring configurations. Contact the factory for details. FEATURES AND BENEFITS EDAC CONNECTOR * Attractive, corrosion-resistant, nickel-plated jacks * Steel frame jacks for superior jack life * Extra wide labeling strips provide maximum space and two vertical strips, one at each side * Rugged, attractive black anodized aluminum face will not break * Two configurations available: - Normals brought out - Normalled at jacks * Gold switching contacts for long-term reliability * Jacks paired for easy identification of left and right channels * Connectorized by EDAC(R) connectors for ease of termination by customer Housing: Thermoplastic, UL94V-0 Contacts: Gold plated phosphor bronze MECHANICAL Life: 30,000 cycles Insertion Force: 7 lbs. maximum Withdrawal Force: 1 lb. minimum Operating: -20C to +65C ELECTRICAL Contact Resistance: 30 milliohms maximum initial Insulation Resistance:10,000 megohms Dielectric Withstanding Voltage: 500VAC at 60 Hz Working Voltage: 140VDC Current Rating: 100 milliamps SPECIFICATIONS MATERIALS JACKS EDAC Mating Plugs Part Number 516-090-000-301 516-090-000-302 516-120-000-101 516-120-000-102 516-290-500 516-290-590 Frame: Nickel-plated steel Bushing: Nickel-plated brass Tip, Ring and Shunt Springs: Nickel silver with welded contacts Assembly Screws: Zinc-plated steel Welded Contacts: Gold alloy PANEL Front Channel: Black anodized aluminum Frame & Cover: C.R.S. black epoxy painted Designation Strips: Black polycarbonate 94V-0 Designation Strip Covers: Clear polycarbonate Jack Inserts: Polyester Ordering Information Part Type of Number Jack TT96EDACNO TT TT96EDACNS TT DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com No. of Jacks 96 96 Description 90 Pin male w/screw 90 Pin male w/nut 120 Pin male w/screw 120 Pin male w/nut Terminal solder-style Terminal crimp-style Description Normals Brought Out (120 pin EDAC) Normals Strapped (90 pin EDAC) Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACK PANELS TT96 EDAC SERIES FAX: 773 792-2129 179 * Please visit the product pages on our website for the most up-to-date product information TT96 EDAC SERIES (continued) JACK PANELS Standard Audio Configuration Wiring (S.A.C.) 90 Pin Plug Connector (Normals at jacks) Standard Audio Configuration Wiring (S.A.C.) 120 Pin Plug Connector (Normals brought out) DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 180 JACK PANELS TT96K PATCHKIT SERIES PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information JACK PANELS TTP96K PATCHKIT SERIES TTP96K1FN The TTP96K Patchkit Series offers the end user a rugged cable tray to support rear cabling. Heavy duty construction takes weight off the back of the jacks for increased reliability. Available in 1.75" or 3.5" height versions. FEATURES AND BENEFITS PANEL * Kit features 96 TT jacks in one rack space (1.75" high) or two rack spaces (3.5" high) * Jack blocks can be removed from the front for easy soldering * Dust tray limits dirt, dust and contamination of jack terminals * Wire management straps are adjustable and reusable * Attractive, corrosion resistant nickel-plated jacks * Steel frame jack for superior jack life * Extra wide labeling strips provide maximum space * Rugged, attractive black anodized aluminum face will not break or rust * Three jack configurations available for the exact switching arrangement you need: full normal, half normal, and non-normal (open circuit) * Fanned solder terminals for easier solder connections * Gold switching contacts for long-term reliability in normal-through connections Front Channel: Black anodized aluminum Frame: C.R.S. black epoxy painted Designation Strips: Black polycarbonate 94V-0 Designation Strip Covers: Clear polycarbonate Jack Inserts: Thermoplastic polyester SPECIFICATIONS MATERIALS JACKS MECHANICAL Life: 30,000 cycles Insertion Force: 7 lbs. maximum Withdrawal Force: 1 lb. minimum Environmental: 0C to +50C ELECTRICAL Contact Resistance: 30 milliohms maximum initial Insulation Resistance: 10,000 megohms maximum Dielectric Withstanding Voltage: 500VAC at 60 Hz Working Voltage: 140VDC maximum Current Rating: 100 milliamps Ordering Information Part Type of Number Jack TTP96K1FN TT Frame: Nickel-plated steel Bushing: Nickel-plated brass Tip, Ring and Shunt Springs: Nickel silver with welded contacts Assembly Screws: Nickel-plated steel Welded Contacts: Gold alloy Description 1.75" High, full normals TTP96K1HN TT 96 1.75" High, half normal TTP96K1NN TT 96 1.75" High, no normals TTP96K3FN TT 96 3.5" High, full normals TTP96K3HN TTP96K3NN TT TT 96 96 3.5" High, half normals 3.5" High, no normals DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com No. of Jacks 96 Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACK PANELS TT96K PATCHKIT SERIES FAX: 773 792-2129 181 * Please visit the product pages on our website for the most up-to-date product information TTP96K PATCHKIT SERIES (continued) JACK PANELS TTP96K1 SERIES TTP96K3 SERIES TOP ROW TOP ROW TOP ROW BOTTOM ROW BOTTOM ROW TTP96K1FN TTP96K3FN BOTTOM ROW TTP96K1HN TTP96K3HN DIMENSIONS ARE FOR REFERENCE ONLY TTP96K1NN TTP96K3NN Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 182 JACK PANELS MT48K/MT52K PATCHKIT SERIES PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information JACK PANELS MT48K/MT52K PATCHKIT SERIES MT52K1FN The MT48/52K Patchkit Series offers the end user a rugged cable tray to support rear cabling. Heavy duty construction takes weight off the back of the jacks for increased reliability. Available in 1.75" or 3.5" height versions. FEATURES AND BENEFITS MECHANICAL * Kit features 48 1/4" longframe jacks in one rack space (1.75" high) or in two rack spaces (3.5" high) or 52 1/4" longframe jacks in one rack space (1.75" high) * Allows user to add cable and termination panel * Removable jack panel from the front allows easy soldering of wire connections * Jacks have gold switching contacts * Fanned solder terminals for easier soldering * Offset ground lugs allow easy bussing of ground with one wire * Jacks have a nickel-plated frame and assembly screws * Wire management straps are reusable and adjustable Life: 30,000 cycles Insertion Force: 7 lbs. maximum Withdrawal Force: 1 lb. minimum Operating: 0C to +50C SPECIFICATIONS MATERIALS JACKS Frame: Stamped nickel-plated steel Bushing: Nickel-plated brass Tip, Ring and Shunt Springs: Nickel silver with welded contacts Assembly Screws: Nickel-plated steel Welded Contacts: Gold alloy PANEL Front Panel: Thermoplastic Frame: C.R.S. black epoxy paint Designation Strips: Black polycarbonate 94V-0 Designation Strip Covers: Clear polycarbonate ELECTRICAL Contact Resistance: 30 milliohms maximum initial Insulation Resistance: 10,000 megohms maximum Dielectric Withstanding Voltage: 500VAC at 60 Hz Working Voltage: 140VDC maximum Current Rating: 100 milliamps Ordering Information Part Type of No. of Number Jack Jacks MT48K1NS MT 48 MT48K1FN MT 48 MT48K1HN MT 48 MT48K1NN MT 48 MT52K1NS MT 52 MT52K1FN MT 52 MT52K1HN MT 52 MT52K1NN MT 52 MT48K3FN MT 48 MT48K3HN MT 48 MT48K3NN MT 48 MT52K3FN MT 52 MT52K3HN MT 52 MT52K3NN MT 52 DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Height 1.75" 1.75" 1.75" 1.75" 1.75" 1.75" 1.75" 1.75" 3.5" 3.5" 3.5" 3.5" 3.5" 3.5" Description Normals strapped Full normals Half normals No normals Normals strapped Full normals Half normals No normals Full normals Half normals No normals Full normals Half normals No normals Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACK PANELS MT48K/MT52K PATCHKIT SERIES FAX: 773 792-2129 183 * Please visit the product pages on our website for the most up-to-date product information MT48K/MT52K PATCHKIT SERIES (continued) JACK PANELS DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 184 JACK PANELS MT48/MT52 PATCHBAY SERIES PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information JACK PANELS MT48/MT52 PATCHBAY SERIES MT48FN The MT48/52 Series patchbays offer a rugged cable tie bar to support rear cabling. Also available is the normals strapped configuration which has the shunts or normals tied together, top to bottom jacks. FEATURES AND BENEFITS * Units feature either 48 or 52 MT Jax(R) * Steel frame jacks for superior jack life * Attractive, corrosion resistant nickel-plated jacks * Gold switching contacts for long-term reliability in normalthrough connections * Offset ground terminal for ease in making common ground buss connections * Fanned solder terminals for easier solder connections * Cable tie bar takes the weight of cables off the jacks * Four jack configurations available for the exact switching arrangement: full normal, half normal, non-normal, and normals strapped SPECIFICATIONS MATERIALS JACKS Frame: Steel, nickel-plated Bushing: Brass, nickel-plated Springs: Nickel silver, solder lugs Ground Terminal: Nickel silver, solder lugs Switching Contacts: Welded, gold alloy Insulation: Phenolic spacers, rigid PVC tubing through stack Screws: Steel, nickel-plated PANEL Jack Panel: Thermoplastic Cable Support Bracket: 5/16" diameter black epoxy painted steel rod Screws (designation strip): Steel, black zinc-plated Screws (mounting jack): Steel, nickel plated Kwik-change(R) Designation Strip: Extruded aluminum, black anodized Marking Strip: White plastic, matte finish Marking Strip Cover: Clear, extruded plastic MECHANICAL Life: 30,000 cycles Insertion Force: 7 lbs. maximum Withdrawal Force: 1 lb. minimum Operating: 0C to +50C ELECTRICAL Contact Resistance: 30 milliohms maximum initial Insulation Resistance: 10,000 megohms maximum Dielectric Withstanding Voltage: 500VAC at 60 Hz Working Voltage: 140VDC maximum Current Rating: 100 milliamps Ordering Information Part Type of Number Jack MT48FN MT MT48HN MT MT48NN MT MT48NS MT MT52FN MT MT52HN MT MT52NN MT MT52NS MT DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com No. of Jacks 48 48 48 48 52 52 52 52 Description Full normals Half normals No normals Normals strapped Full normals Half normals No normals Normals strapped Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACK PANELS MT48/MT52 PATCHBAY SERIES FAX: 773 792-2129 185 * Please visit the product pages on our website for the most up-to-date product information MT48/MT52 PATCHBAY SERIES (continued) JACK PANELS MT52 SERIES MT48 SERIES YMT332BN YMT334BN YMT389N JACK SCHEMATICS "N" SUFFIX DENOTES WELDED GOLD CONTACTS AND NICKEL-PLATED FRAME DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 186 JACK PANELS TTP96AS PATCHBAY SERIES PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information JACK PANELS TTP96AS PATCHBAY SERIES TTP96AS The TTP96AS Series of patchbays offer a rugged cable tie bar to support rear cabling. FEATURES AND BENEFITS PANEL * * * * * Frame: Black anodized aluminum Inserts: Polyester, glass filled, 94V-0 Cable Support Bar: Cold rolled steel, nickel-plated Designation Strips: Thermoplastic, 94V-0 Designation Strip Covers: Clear thermoplastic, SE-1 Marking Strip: Rigid vinylite Jack Mounting Screws: Steel, plated Screws: Steel, black plated Unit features 96 TT jacks Attractive, corrosion resistant nickel-plated jacks Steel frame jack for superior jack life Extra wide labeling strips provide maximum space Rugged cable tie bar takes the weight of cables off the jacks * Rugged, attractive black anodized aluminum face will not break * Three jack configurations available for the exact switching arrangement you need: full normal, half normal, and open circuit panel * Fanned solder terminals for easier solder connections * Offset ground terminal for ease in making common ground buss connections * Gold switching contacts for long-term reliability in normal-through connections SPECIFICATIONS MATERIALS JACKS Frame: Steel, nickel-plated Bushing: Nickel-plated copper alloy Springs: Copper alloy solder lugs Ground Terminal: Steel, tin electrodeposited Switching Contacts: Welded, gold alloy inlay over palladium base Insulation: Rigid plastic spacers, rigid PVC tubing through stack Screws: Steel, plated MECHANICAL Life: 30,000 cycles Insertion Force: 7 lbs. maximum Withdrawal Force: 1 lbs. minimum Environmental: 0C to +50C ELECTRICAL Contact Resistance: 30 milliohms maximum initial Insulation Resistance: 10,000 megohms maximum Dielectric Withstanding Voltage: 500VAC at 60 Hz Working Voltage: 140VDC maximum Current Rating: 100 milliamps Ordering Information Part Type of Number Jack TTP96ASFN TT TTP96ASHN TT TTP96ASNN TT DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com No. of Jacks 96 96 96 Description Full normals Half normals No normals Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACK PANELS TTP96AS PATCHBAY SERIES FAX: 773 792-2129 187 * Please visit the product pages on our website for the most up-to-date product information TTP96AS PATCHBAY SERIES (continued) JACK PANELS TOP ROW TOP ROW TOP ROW BOTTOM ROW BOTTOM ROW TTP96ASFN BOTTOM ROW TTP96ASHN DIMENSIONS ARE FOR REFERENCE ONLY TTP96ASNN Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 188 JACK PANELS Q-G(R) PATCHBAY SERIES PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information JACK PANELS Q-G(R) PATCHBAY SERIES QGPK332MFB The QG Patchbay features a 19" rack unit loaded with E Series QG connectors. These XLR's have the same panel cut-out, male or female, silver-plated pins or contacts, and a black finish. All connectors have solder cup terminals for easy soldering and the inserts are removable from the back, allowing for easy changes. The one rack unit height version comes with 16 male, or 16 female, or 8 male and 8 female connectors. The two rack unit version comes with 16 male and 16 female connectors. We also offer the unit without connectors, but with the panel cut-outs already punched out. All versions have a rugged cable tie bar, which takes the weight of the cabling away from the solder connections. FEATURES AND BENEFITS * Available in 1RU or 2RU versions * Available with or without the connectors * E Series connectors are silver-plated, 3 pins/contacts with black finish * Cable tie bar takes the weight of the cables off the solder terminations * Rugged aluminum channel increases durability * Silk-screen designation area makes it easy to re-label channels SPECIFICATIONS MATERIALS CONNECTORS Latch Release: Steel, nickel-plated Insert Locking Cam: Die-cast zinc FRAME Aluminum, black anodized CABLE TIE BAR Steel, black epoxy Ordering Information Part Number Height QGPK116FB 1.75" QGPK116MB 1.75" QGPK18M8FB 1.75" QGPK332MFB 3.5" QGPK1B 1.75" QGPK3B 3.5" Housing: Die-cast, black velvet finish Inserts: Glass-filled thermoplastic Pin/Contacts: Copper alloy, silver-plated DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Description 16 female 16 male 8 male, 8 female 16 female( top), 16 male (bottom) Blank panel Blank panel Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery (R) (R) JACK PANELS Q-G PATCHBAY SERIES FAX: 773 792-2129 189 * Please visit the product pages on our website for the most up-to-date product information Q-G(R) PATCHBAY SERIES (continued) JACK PANELS DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 190 JACK PANELS HPC PATCHBAY SERIES PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information JACK PANELS HPC PATCHBAY SERIES The HPC Patchbay features a 19" rack unit loaded with HPC Series connectors. Available with either 0.250" Faston terminals or 0.187" Faston terminals. One rack unit height versions come with 12 HPC connectors, two rack unit height versions come with 24 HPC connectors. All versions have a rugged cable tie bar, which takes the weight of the cabling away from the connections. FEATURES AND BENEFITS * Available in 1RU or 2RU versions * Available with or without connectors * HPC Series connectors are compatible with Neutrik Speakon(R) connectors * Cable tie bar takes weight of the cables off the terminations * Rugged aluminum channel * Silk-screen designation area makes it easy to re-label channels HP CONNECTOR SPECIFICATIONS See page 38 for details MATERIALS Housing: Thermoplastic UL 94V-O rated Contacts: Silver-plated over copper alloy FRAME Aluminum, black anodized CABLE TIE BAR Steel, black epoxy Part Number HPCPK112F HPCPK112F1 HPCPK1B HPCPK324F HPCPK324F1 HPCPK3B DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Height 1.75" 1.75" 1.75" 3.50" 3.50" 3.50" Description 12 connectors, 0.250" 12 connectors, 0.187" Blank panel 24 connectors, 0.250" 24 connectors, 0.187" Blank panel Fastons Fastons Fastons Fastons Inch (mm) (R) Registered trademark of Neutrik Note: Contact your Switchcraft Representative for price and delivery JACK PANELS DATA PATCHBAY SERIES FAX: 773 792-2129 191 * Please visit the product pages on our website for the most up-to-date product information RS 422 DATA PATCHBAY SERIES JACK PANELS FEATURES AND BENEFITS RS422 Ordering Part Number* RS422H48N081 RS422V4N081 RS422H4N161 RS422H4N162 RS422V4N161 RS422V4N162 RS422H4N242 RS422V4N242 RS422V4N322 RS422PH4N081 RS422PV4N081 RS422PH4N161 RS422PH4N162 RS422PV4N161 RS422PV4N162 RS422PH4N242 RS422PV4N242 RS422PV4N322 Information No. of Front Panel Jacks Layout 2x8 Horizontal 2x8 Vertical 2 x 16 Horizontal 2 x 16 Horizontal 2 x 16 Vertical 2 x 16 Vertical 2 x 24 Horizontal 2 x 24 Vertical 2 x 32 Vertical 2x8 Horizontal 2x8 Vertical 2 x 16 Horizontal 2 x 16 Horizontal 2 x 16 Vertical 2 x 16 Vertical 2 x 24 Horizontal 2 x 24 Vertical 2 x 32 Vertical Back Rack Plane Height 9 Pin D-Sub 1 9 Pin D-Sub 1 9 Pin D-Sub 1 9 Pin D-Sub 2 9 Pin D-Sub 1 9 Pin D-Sub 2 9 Pin D-Sub 2 9 Pin D-Sub 2 9 Pin D-Sub 2 PPT Punchdown 1 PPT Punchdown 1 PPT Punchdown 1 PPT Punchdown 2 PPT Punchdown 1 PPT Punchdown 2 PPT Punchdown 2 PPT Punchdown 2 PPT Punchdown 2 * Unit Features either 8,16, 24, or 32 TT style jacks on the front Panels, to a 9 pin D-Sub or PPT back Plane. * All version utilize low capacitance internal wiring for maximum performance of transferring data * All standard units are available 1 or 2 rack units high (1.5 RU available by request) * Rugged, attractive black epoxyfinished steel frame chassis Our standard RS data jackfield series offer a multiple combination of ports, rack heights, and back panel terminations which will easily fit into any television broadcast or video production where custom data patching is required. Custom ports and rack height combinations can be supplied. Contact the factory for details. SPECIFICATIONS ELECTRICAL Internal Wiring: 24 AWG Solid TC, foils shield Nom Capacitance: 11.5 pF/ft between conductors 21.3 pF/ft between one conductor and conductor connected to the shield Nom. Impedance: 110 Ohms *Add "N" for non-normalled version See Page 267 for Patchcord Information DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 192 JACK PANELS DATA PATCHBAY SERIES PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information JACK PANELS RS 422 DATA PATCHBAY SERIES RS422V4N322 32 Vertical Paired Jacks Front and Back Views RS422H4N242 24 Horizontal Paired Jacks Front and Back Views Ordering Information Part Number RS422H4N081 RS422V4N081 RS422H4N162 RS422V4N162 RS422H4N242 RS422V4N242 RS422V4N322 RS422PH4N081 RS422PV4N081 RS422PH4N162 RS422PV4N162 RS422PH4N242 RS422PV4N242 RS422PV4N322 No. of Jacks 2x8 2x8 2 x 16 2 x 16 2 x 24 2 x 24 2 x 32 2x8 2x8 2 x 16 2 x 16 2 x 24 2 x 24 2 x 32 Front Panel Layout Horizontal Vertical Horizontal Vertical Horizontal Vertical Vertical Horizontal Vertical Horizontal Vertical Horizontal Vertical Vertical DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Back Plane 9 Pin D-Sub 9 Pin D-Sub 9 Pin D-Sub 9 Pin D-Sub 9 Pin D-Sub 9 Pin D-Sub 9 Pin D-Sub PPT Punchdown PPT Punchdown PPT Punchdown PPT Punchdown PPT Punchdown PPT Punchdown PPT Punchdown Rack Height 1 1 1, 2 1, 2 2 2 2 1 1 1, 2 1, 2 2 2 2 Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACK PANELS VPP VIDEO PATCHBAY SERIES FAX: 773 792-2129 193 * Please visit the product pages on our website for the most up-to-date product information VPP VIDEO PATCHBAY SERIES VPP24K3HD75T JACK PANELS VJHD*75TX The VPP Series video patchbays offer a wide variety of options for video patching. The HD Series meets SMPTE 292M specifications for high definition video signaling, covering a bandwidth range from DC to 2.4GHz. The SD Series is perfect for serial digital, with a bandwidth from DC to 1.75GHZ. Both come in either terminated or non-terminated, 24 or 26 jacks, 1.75" or 3.5" heights. FEATURES AND BENEFITS ENVIRONMENTAL * HD Series meets SMPTE 292M Specifications * SD Series has a bandwidth from DC to 1.75GHz * Black thermoplastic modules insulate jacks from chassis * Jacks feature rugged heavy duty housings Operating Temperature: - 40C to 65C Storage Temperature: - 55C to 85C Thermal Shock: Per MIL-STD-202, Method 107 Moisture and Humidity: Per MIL-STD-202, Method 106 VIDEO JACK SPECIFICATIONS ELECTRICAL Rated Bandwidth: 2.4 GHz (HD), 1.75 GHz (SD) Characteristic Impedance: 75 ohms Return Loss: Better than -15 dB Insertion Loss: Better than -.5 dB Contact Resistance: Less than 20 milliohms Termination Resistance: 75 W, 1% Center Conductor: Accepts .090 pin diameter MECHANICAL Mechanical Shock: Per MIL-STD-202, Method 213, Test condition I Vibration: Per MIL-STD-202, Method 201 Insertion Force: 12 lbs. maximum Withdrawal Force: 3 lbs. minimum Life Cycle: 30,000 MATERIAL Housing: Zinc alloy, nickel plated Center Contacts: Copper alloy, gold plated Switching Springs: Copper alloy, gold plated Grounding Contacts: HD Series - Copper alloy, gold plated SD Series - Copper alloy, nickel plated Insulators: Thermoplastic, UL 94V-0 rated Ordering Information Part Type of No. of Number Jack Jacks Height VPP24K1HD*75T HD 24 1.75" VPP24K1HD*NT HD 24 1.75" VPP24K1SD*75T SD 24 1.75" VPP24K1SD*NT SD 24 1.75" VPP26K1HD*75T HD 26 1.75" VPP26K1HD*NT HD 26 1.75" VPP26K1SD*75T SD 26 1.75" VPP26K1SD*NT SD 26 1.75" VPP24K3HD*75T HD 24 3.5" VPP24K3HD*NT HD 24 3.5" VPP24K3SD*75T SD 24 3.5" VPP24K3SD*NT SD 24 3.5" VPP26K3HD*75T HD 26 3.5" VPP26K3HD*NT HD 26 3.5" VPP26K3SD*75T SD 26 3.5" VPP26K3SD*NT SD 26 3.5" *Add "N" for non-normalled version DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 Description Terminated Non-term Terminated Non-term Terminated Non-term Terminated Non-term Terminated Non-term Terminated Non-term Terminated Non-term Terminated Non-term 194 JACK PANELS VPP VIDEO PATCHBAY SERIES PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information JACK PANELS VPP VIDEO PATCHBAY SERIES (continued) NON-NORMALLED TERMINATED NORMALLED TERMINATED NORMALLED NON-TERMINATED DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com NON-NORMALLED NON-TERMINATED Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACK PANELS VPP VIDEO PATCHBAY SERIES FAX: 773 792-2129 195 * Please visit the product pages on our website for the most up-to-date product information VPP VIDEO PATCHBAY SERIES (continued) SMITH CHART (TYPICAL) JACK PANELS Ordering-Individual Jacks Part Number Type Description VJHD*75TX HD Terminated VJHD*NTX HD Non-terminated VJSD*75TX SD Terminated VJSD*NTX SD Non-terminated *Add "N" for non-normalled version FREQUENCY (MHz) FREQUENCY (MHz) DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 196 JACK PANELS MVP MIDSIZE VIDEO PATCHBAY SERIES PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information MVP MIDSIZE VIDEO PATCHBAY SERIES JACK PANELS MVP32K3*75T MVJ*75T The MVP Series video patchbays offer outstanding performance and high density. Patchbays consist of 32 jacks in either 1RU or 2RU heights, jacks come either terminated or non-terminated. These jacks are rated from DC to 3 GHz, and are rated at 30,000 lifecycles. FEATURES AND BENEFITS MATERIAL * Midsize video jacks rated from DC to 3 GHz * 32 midsize jacks mounted either 1RU, 1.5RU or 2RU panel * Available in terminated or non-terminated configurations Housing: Zinc alloy, nickel plated Center Contacts: Copper alloy, gold plated Switching Springs: Copper alloy, gold plated Grounding Contacts: Copper alloy, gold plated BNC Insulators: Teflon Actuators: Thermoplastic, UL94V-0 rated SPECIFICATIONS MATERIAL Frame: Aluminum, black anodized Designation Strips: Vinylite, white Designation Strip Covers: Lexan, transparent Jack Inserts: Thermoplastic, UL 94V-0 rated MIDSIZE VIDEO JACK SPECIFICATIONS ELECTRICAL Rated Bandwidth: 3.0 GHz Characteristic Impedance: 75 ohms Return Loss: See Typical Return Loss Chart Insertion Loss: See Typical Insertion Loss Chart Contact Resistance: Less than 20 milliohms Termination Resistance: 75 W, 1% Center Conductor: Accepts .048 pin diameter MECHANICAL Mechanical Shock: Per MIL-STD-202, Method 213, Test condition I Vibration: Per MIL-STD-202, Method 201 Insertion Force: 12 lbs. maximum Withdrawal Force: 3 lbs. minimum Life Cycle: 30,000 ENVIRONMENTAL Operating Temperature: - 40C to 65C Storage Temperature: - 55C to 85C Thermal Shock: Per MIL-STD-202, Method 107 Moisture and Humidity: Per MIL-STD-202, Method 106 Ordering Information Part Type Number of Jack Height MVP32K1*75T Midsize 1.75" MVP32K1*NT Midsize 1.75" MVP32K3*75T Midsize 3.5" MVP32K3*NT Midsize 3.5" * Add "N" for non-normalled version Description Terminated Non-terminated Terminated Non-terminated Note: For 1.5RU (2.62" height), use K2 DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACK PANELS MVP MIDSIZE VIDEO PATCHBAY SERIES FAX: 773 792-2129 197 * Please visit the product pages on our website for the most up-to-date product information MVP MIDSIZE VIDEO PATCHBAY SERIES (continued) JACK PANELS DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 198 JACK PANELS MVP MIDSIZE VIDEO PATCHBAY SERIES PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information MVP MIDSIZE VIDEO PATCHBAY SERIES (continued) SMITH CHART (TYPICAL) JACK PANELS Ordering Information Part Number Description MVJ*75TX Terminated MVJ*NTX Non-terminated *Add "N" for non-normalled version RETURN LOSS (TYPICAL) RETURN LOSS (TYPICAL) R E T U R N 0 G O O D -5 -10 -15 L O -20 S S -25 (dB) -30 I N S E R T I O N L O S S (dB) 0 -1 -2 -3 G O O D -4 -5 -35 0 600 1200 1800 2400 3000 DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com 0 600 1200 1800 2400 3000 Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACK PANELS VAP VIDEO/AUDIO PATCHBAY SERIES FAX: 773 792-2129 199 * Please visit the product pages on our website for the most up-to-date product information VAP VIDEO/AUDIO PATCHBAY SERIES VJHD*75TX JACK PANELS VAPK3HD*75T The VAP Series combines audio and video in one convenient patchbay. Standard versions consist of 13 video jacks and 26 long-frame audio jacks into one unit. Options include HD Series video jacks which are rated from DC to 2.4GHz or SD Series rated from DC to 1.5GHz. Both come in either terminated or non-terminated jacks. The MT Style audio jacks all have nickel-plated steel frames and gold-plated switching contacts. Flared terminals make soldering easier. All audio jacks are T,R,S, TN, and RN. Individual modules are useful for custom configurations. FEATURES AND BENEFITS * Combines 13 video jacks and 26 long-frame audio jacks into one patchbay * Available with either HD Series or SD Series video jacks * All audio jacks are nickel-plated with steel frames and gold-plated switching contacts * Audio modules consist of 4 YMT334BN jacks, video modules consist of 2 dual video jacks Grounding Contacts: HD Series - Copper alloy, gold plated SD Series - Copper alloy, nickel plated Insulators: Thermoplastic, UL 94V-0 rated ENVIRONMENTAL Operating Temperature: - 40C to 65C Storage Temperature: - 55C to 85C Thermal Shock: Per MIL-STD-202, Method 107 Moisture and Humidity: Per MIL-STD-202, Method 106 VIDEO JACK SPECIFICATIONS ELECTRICAL Rated Bandwidth: 2.4 GHz (HD), 1.75 GHz (SD) Characteristic Impedance: 75 ohms Return Loss: Better than -15 dB Insertion Loss: Better than -.5 dB Contact Resistance: Less than 20 milliohms Termination Resistance: 75 W, 1% Center Conductor: Accepts .090 pin diameter MECHANICAL Mechanical Shock: Per MIL-STD-202, Method 213, Test condition I Vibration: Per MIL-STD-202, Method 201 Insertion Force: 12 lbs. maximum Withdrawal Force: 3 lbs. minimum Life Cycle: 30,000 MATERIAL Housing: Zinc alloy, nickel plated Center Contacts: Copper alloy, gold plated Switching Springs: Copper alloy, gold plated Ordering Information Part Type of Number Jack Height Description VAPK1HD*75T HD 1.75" Terminated VAPK1HD*NT HD 1.75" Non-terminated VAPK1SD*75T SD 1.75" Terminated VAPK1SD*NT SD 1.75" Non-terminated VAPK3HD*75T HD 3.5" Terminated VAPK3HD*NT HD 3.5" Non-terminated VAPK3SD*75T SD 3.5" Terminated VAPK3SD*NT SD 3.5" Non-terminated Modules VMAFN MT 4- YMT334BN jacks VMVHD*75T HD 2- HD terminated jacks VMVHD*NT HD 2- HD non-terminated jacks VMVSD*75T SD 2- SD terminated jacks VMVSD*NT SD 2-SD non-terminated jacks *Add "N" for non-normalled version DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 200 JACK PANELS VAP VIDEO/AUDIO PATCHBAY SERIES PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information JACK PANELS VAP VIDEO/AUDIO PATCHBAY SERIES (continued) VAPK3HD*75T VAPK1HD*75T VJ SERIES MT SERIES DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACK PANELS MBPK VIDEO/AUDIO PATCHBAY SERIES FAX: 773 792-2129 201 * Please visit the product pages on our website for the most up-to-date product information MBPK VIDEO/AUDIO PATCHBAY SERIES JACK PANELS MBPK175T The MBPK Series combines audio and video in one convenient patchbay. The patchbay consists of 16 midsize video jacks and 48 TT bantam jacks. Options include 75 Ohm terminated or non-terminated video jacks. All TT bantam jacks have T, R, S, TN and RN solder terminals. Audio jacks have nickel-plated steel frames, gold-plated crossbar switching contacts and flared terminals for easier soldering. VIDEO JACK SPECIFICATIONS FEATURES AND BENEFITS MATERIALS FRAME Combines 16 midsize video jacks and 48 TT bantam audio jacks See page 196 for details AUDIO JACK SPECIFICATIONS See page 164 for details Aluminum, black anodized Video jacks are rated from DC to 3.0 GHZ All audio jacks are nickel-plated with steel frames and goldplated crossbar switching contacts For non-terminated version, use part no. MBPK1NT DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 202 JACK PANELS LONG FRAME 1/4" TELEPHONE JACK PANELS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information LONG FRAME (1/4") TELEPHONE JACK PANELS STANDARD SINGLE ROW JACK PANELS JACK PANELS SERIES 1200 AND 1400 SERIES 1200 Panels accomodate 24 T-Jax(R) jacks in standard 1.75 inch x 19 inch racks. Jack openings are on alternate .625 inch and .750 inch spacing; twin plugs cannot be cross-connected between adjacent jack pairs. Includes designation strips (marking strips and transparent plastic covers). SERIES 1300 Same as Series 1200, except MT-Jax(R) are used in panel assemblies. Series 1200 *Shown with optional jacks. See next page for specific part numbers. SERIES 1400 Mounts 26 T-Jax(R). Openings are on continuous .625 inch centers. Twin plug can be used on any two adjacent jacks. Single designation strip (marking strip, and plastic cover). WEco equivalent is 230B. SERIES 1400300 Same as Series 1400, except designation strip is Kwik-Change(R) type which is easier to install and remove and provides larger vertical designation marking area. Strip holder is recessed into top of panel for additional panel strength. 1400301 has single height Kwik-Change(R) designation strip. 1400315 has a single height Kwik- Change(R) designation strip along bottom of panel and double height strips above jacks. Top designation strip has .188 inch overhang above 1.75 inch panel height, to help seal small opening between adjacent panels. CAUTION: Because of this overhang, 1400315 cannot be mounted one above another in a rack. SERIES 1500 Same as Series 1400 except MT-Jax(R) are used in panel assemblies. SPECIFICATIONS Jack Panel: General purpose black phenolic resin Frame (except 1400300): Plated, steel End Bracket and Side Strip (1400300 only): Cold rolled plated steel Designation Strip (except 1400300): Clear plastic. "Kwik-Change" Designation Strip (1400300): Extruded aluminum, black anodized and black thermoplastic UL 94V-0. Marking Strip: White plastic, matte finish. Marking Strip Cover: Clear extruded plastic. Screws: #6-32 x .25 inch phillips RHMS (for mounting jacks). ORDERING Part number table lists blank panels and popular jack panel assemblies. If you wish to mount components on basic panels, order jacks, lamp jacks, and switches separately. (See appropriate section in this catalog.) For other panel assemblies, provide complete details with your inquiry or order. Switchcraft can build special assemblies to your requirements in small or large quantities. See wire wrapping data. Series 1200 and 1400 are available with holes pre-drilled for vertical designation strips (Series DS320). Add prefix "D" to part numbers for pre-drilled panels: D1200, D1400301, etc. Series 1400 *Shown with optional jacks. See next page for specific part numbers. 1400301 *Shown with optional jacks. See next page for specific part numbers. 1400315 *Shown with optional jacks. See next page for specific part numbers. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACK PANELS LONG FRAME 1/4" TELEPHONE JACK PANELS FAX: 773 792-2129 203 * Please visit the product pages on our website for the most up-to-date product information LONG FRAME (1/4") TELEPHONE JACK PANELS (continued) Part Numbers Part Numbers Assembly with Jacks With Solder Lugs Straight 1200 1400 1400301 1400315 - 1332A 1332B 1334B 1532A 1532A301 1532B 1532B301 1534B - Offset X1332A X1332B X1334B X1532A X1532B301 X1534B X1542B315 Special order only; contact factory for price and delivery. 1. Prefix "X" denotes offset lugs for buss wiring. W1332A W1334B W1532A301 W1532B301 W1534B W1534B301 - Number of Jacks None 24 24 24 None None None 26 26 26 26 26 26 26 Type of Jacks Installed MT332A , XMT332A or WMT332A MT-Jax (R) MT332B or XMT332B MT-Jax(R) MT334B,XMT334B or WMT334B MT-Jax(R) MT332A or XMT332A MT-Jax(R) MT332A or WMT332A MT-Jax(R) MT332B MT-Jax(R) MT332B, XMT332B or WMT332B MT-Jax(R) MT334B, XMT334B or WMT334B MT-Jax(R) WMT334B MT-Jax(R) XMT342B MT-Jax(R) Jack Mounting Screws: #6-32, P10725, can be ordered separately. Contact Switchcraft. Legend Cards (Series 1200, 1300) - A1029 Legend Windows (Series 1200, 1300) - A1030 Series 1200 Series 1400 Series 1400-301 Series 1400-315 DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 JACK PANELS Panel Only Assembly with Jacks With Wire-Wrapping Terminals Description 204 JACK PANELS LONG FRAME 1/4" TWIN ROW JACK PANELS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information JACK PANELS LONG FRAME (1/4") TWIN ROW JACK PANELS Series 2400 *Shown with optional jacks, See next page for specific part numbers. Series 2600301 *Shown with optional jacks, See next page for specific part numbers. Series 2600 *Shown with optional jacks, See next page for specific part numbers. STANDARD TWIN ROW JACK PANELS SERIES 2400, 2600, 2600300, 2700300 - PHENOLIC strength. 2600301 has single height designation strips (one above and below each row of jacks). Twin row jack panels offer greater jack density - up to 52 jacks per panel. All panels fit standard 19" wide racks. Blank panels or standard assemblies can be ordered from Switchcraft. Series 2600 panels are direct equivalent to WEco #230A. 2600310 SERIES 2400 Twin row panel accommodates 48 T-Jax(R). Openings are on alternate .625" and .75" centers. Panel is 2.125" high and fits standard 19" racks. Twin plug cannot be cross-connected between jacks in adjacent quads, but may be connected either horizontally or vertically in the same quad. Single designation strip. SERIES 2500 Same as Series 2400 except MT-Jax(R) are used. SERIES 2600 Twin row panel accommodates 52 T-Jax(R) in standard 1.75" x 19" racks. Jack openings are on continuous centers. Twin plug can be connected to any two adjacent jacks, either horizontally or vertically. Two designation strips. WEco equivalent is #230A. Has a double height strip above top row and a steel reinforcing strip below bottom row. Top strip has .188" overhang above 1.75" panel height, helping seal the small opening between adjacent panels. Note: overhang prevents mounting panel one above another in a rack. SERIES 2700 Same as Series 2600 except MT-Jax(R) are used in panel assemblies. The series is available with cable tie bar. ORDERING 1. Order basic panels and popular assemblies by part number from table. 2. For special panels provide complete details with your inquiry or order. 3. Series 2600 is available with hole pre-drilled for vertical designation strips, Series DS320. Add prefix "D" to part number (D2600301, etc.). 4. Jack Mounting Screws: #6-32, P10725, can be ordered separately. Contact Switchcraft. SERIES 2600300 Same as Series 2600, except designation strips are Kwik-Change(R) type, providing larger vertical marking area. Top strip holder is recessed into top of panel to provide additional DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACK PANELS LONG FRAME 1/4" TWIN ROW JACK PANELS - PART NUMBERS FAX: 773 792-2129 205 * Please visit the product pages on our website for the most up-to-date product information LONG FRAME (1/4") TWIN ROW JACK PANELS (continued) Part Numbers Part Numbers Assembly with Jacks Having Solder Lugs Straight Offset1 2400 2600 2600301 2600310 - 2432A 2432B 2434B 2532A 2532B 2533 2533B 2534B 2542B 2544B 2588 2589 2732A 2732A301 2732B 2732B301 2733B 2734B 2734B301 2789 - X2432A X2432B X2434B X2532A X2532B X2534B X2732A X2732A301 X2732B X2732B301 X2734B X2734B301 X2832A X2932A Number of Jacks Type of Jack Installed W2532A W2533B - None 48 48 48 T332A T332B T334B or XMT334B T-Jax(R) 48 48 48 48 48 48 MT332A, XMT332A or WMT332A MT-Jax (R) MT332B or XMT332B MT-Jax(R) MT333 MT-Jax(R) MT333B or WMT333B MT-Jax(R) MT334B or XMT334B MT-Jax(R) MT342B MT-Jax(R) W2732A301 W2732B W2732B301 W2734B301 W2789 - 48 24 24 None None None 52 52 52 52 52 52 52 26 48 48 MT344B, MT-Jax(R) MT388, Twin MT-Jax(R) MT389 Twin MT-Jax(R) (WEco equivalent #230A) MT332A or XMT332A MT-Jax(R) MT332A, XMT332A or WMT332A MT-Jax(R) MT332B, XMT332B or WMT332B MT-Jax(R) MT332B, XMT332B or WMT332B MT-Jax(R) MT333B, MT-Jax(R) MT334B or XMT334B MT-Jax(R) MT334B, XMT334B or WMT334B MT-Jax(R) MT389 or WMT389 Twin MT-Jax(R) XT332A XMT332A 1. Prefix "X" denotes offset lugs for buss wiring. Special order only; contact factory for price and delivery. Series 2600300 and 2700301 Series 2400 and 2500 Series 2600 and 2700 Series 2600310 and 2700310 DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 JACK PANELS Panel Only Assembly with Jacks Having WireWrapping Terminals Description 206 JACK PANELS LONG FRAME 1/4" MODULAR TWIN ROW JACK PANELS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information LONG FRAME (1/4") MODULAR TWIN ROW JACK PANELS SERIES JP072S32A JACK PANELS SERIES JP122S34B *Shown with optional jacks, See next page for specific part numbers. *Shown with optional jacks, See next page for specific part numbers. SERIES JP032S32B *Shown with optional jacks, See next page for specific part numbers. SERIES JP012000 THROUGH JP122000 SERIES JP052000 Series JP(R) Modular Jack Panels feature a modular packaging concept. Jacks are mounted on inserts then complete modular insert assemblies are mounted to the panel from the rear. Mounting and wiring are quick and easy. Individual jacks or complete inserts can be removed from the panel with minimum disturbance to wiring and adjacent jacks. JP panels offer three mounting styles (standard rack mount, flush mount, and extension mount), staggered or continuous-center panel openings, two panel lengths (19" and 23"), WEco equivalents, Kwik-Change(R) designation strips, precision manufactured modular parts, rugged black anodized aluminum frames and quick and easy module or jack removal/installation. Same as JP012000, except designed for flush mounting or standoff mounting. Switchcraft Bracket Kit K107; Contact Switchcraft. Each module insert has four holes which mount four MT-Jax(R) or two Twin-Jax(R). Each modular jack panel is supplied with two Kwik-Change(R) designation strips. Mounting strips are integral with panel, and marking strips and clear covers snap into place quickly and easily. Same as JP072000, except with 5.375" extension brackets which permit access to rear of jacks from front of panel. Brackets are supplied mounted to panel. SERIES JP012000 SERIES JP062000 Same as JP052000, except 23" wide (includes 14 inserts which accommodate 56 MT-Jax(R)). SERIES JP072000 Same as JP012000, except mounts 52 MT-Jax(R) and includes 13 black module inserts. Modular equivalent of WEco #230A. SERIES JP082000 Same as JP072000, except 23" wide (includes 16 inserts which accommodate 64 MT-Jax(R)). Modular equivalent to WEco #231A. SERIES JP092000 SERIES JP102000 Same as JP092000, except 23" wide (includes 16 inserts which accommodate 64 MT-Jax(R)). Standard 1.75" x 19" size for console, rack or control panel mounting. Mounts 48 MT-Jax(R). Openings are on alternate .625" and .75" centers in each row. A twin plug fits jacks horizontally or vertically in the same quad, but cross-connecting between quads is not possible. Includes 12 black module inserts, insert mounting screws and two Kwik-Change(R) designation strips. SERIES JP112000 SERIES JP022000 SPECIFICATIONS Same as JP012000, except 23" wide (includes 14 inserts which accommodate 56 MT-Jax(R)). Panel and Integral Designation Mounting Strips: Aluminum alloy, extruded. Black anodized per MIL-A-8625 Module Insert: Molded plastic, matte finish. Black standard; white, red, green, blue or yellow available on special order Marking Strip: White matte finish plastic Designation Strip Cover: Extruded clear plastic Screws: #6-32 x 5/15", PHMS, for jack mounting; #4-40 x 1/2" phillips PHMS, for module insert mounting Brackets: 5.375", aluminum alloy black anodized finish (JP032000, JP042000, JP092000, JP102000) Screws, Mounting Bracket: #6-32, self-tapping supplied. SERIES JP032000 Same as JP012000, except with 5.375" extension brackets which permit access to rear of jacks from front of panel. Brackets are supplied mounted to panel. SERIES JP042000 Same as JP032000, except 23" wide (includes 14 inserts which accommodate 56 MT-Jax(R)). Same as JP072000, except designed for flush mounting or standoff mounting. Switchcraft Bracket Kit K107; Contact Switchcraft. SERIES JP122000 Same as JP112000, except 23" wide (includes 16 inserts which accommodate 64 MT-Jax(R)). DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACK PANELS LONG FRAME 1/4" MODULAR TWIN ROW JACK PANELS FAX: 773 792-2129 207 * Please visit the product pages on our website for the most up-to-date product information LONG FRAME (1/4") MODULAR TWIN ROW JACK PANELS (continued) ORDERING Order popular assemblies by part number from table. If you wish to mount components on the panels, order blank panels and refer to MODULE INSERTS below. On special order, various combinations of colored inserts mounted in basic panels, as well as many different types of complete assemblies are possible. Provide complete details with your inquiry or order. Standard mount panels are available with holes pre-drilled for vertical designation strips, Series DS320. Add prefix "D" to part number (JPD012000, JPD022000, JPD072000, JPD082000, etc.). Panel Only JP012000 JP022000 JP032000 JP042000 JP052000 JP062000 - Assembly with Jacks Having Solder Lugs JP012S32A JP012S32B1 JP012S34B1 JP022S32A JP022S32B JP022S34B JP032S32A JP032S32B JP032S34B JP042S32A JP042S32B JP042S34B JP052S32A JP052S32B JP052S34B JP062S32A JP062S32B JP062S34B # of Jacks None 48 48 48 None 56 56 56 None 48 48 48 None 56 56 56 None 48 48 48 None 56 56 56 MT-Jax Installed (R) MT332A MT332B MT334B MT332A MT332B MT334B MT332A MT332B MT334B MT332A MT332B MT334B MT332A MT332B MT334B MT332A MT332B MT334B 1. Add a "1" to the part number to specify a cable tie bar. Mounting Screws: #6-32, P10725 for jack mounting and #4-40, P2435 for insert mounting, can be ordered separately. Special order only; contact Switchcraft. Panel Only JP072000 JP082000 JP092000 JP102000 JP112000 JP122000 - Assembly with Jacks Having Solder Lugs JP072S32A JP072S32B JP072S34B JP082S32A JP082S32B JP082S34B JP092S32A JP092S32B JP092S34B JP102S32A JP102S32B JP102S34B JP112S32A JP112S32B JP112S34B JP122S32A JP122S32B JP122S34B # of Jacks None1 52 52 52 None2 MT-Jax(R) Installed 64 64 64 None 52 52 52 None 64 64 64 None 52 52 52 None 64 64 64 MT332A MT332B MT334B MT332A MT332B MT334B MT332A MT332B MT334B MT332A MT332B MT334B MT332A MT332B MT334B MT332A MT332B MT334B * Panels with jacks having wire-wrapping terminals are approximately 10% higher in price. Contact Switchcraft. 1. Non-modularized equivalent is WEco #230A. 2. Non-modularized equivalent is WEco #231A. MODULE INSERTS JP9942 JP9922 JP9902 Standard color is black, matte finish plastic. Contact Switchcraft. Inserts are ideal for mounting directly in control panels and chassis where convenient jack connections are required. Applications include test outlets, remote equipment connections and headsets such as those used in telephone and telecommunications equipment. Part Number Description JP9942 Black module insert with four jack openings (less jacks). Includes two, #4-40 machine screws for mounting. JP9922 Black module insert with two jack openings (less jacks). Includes two, #4-40 machine screws for mounting. JP9902 Black module insert without holes. Includes two, #4-40 machine screws for mounting. Used where no jacks are needed. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 JACK PANELS Part Numbers* Part Numbers* 208 JACK PANELS LONG FRAME (1/4") MODULAR TWIN ROW JACK PANELS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information JACK PANELS LONG FRAME (1/4") MODULAR TWIN ROW JACK PANELS (continued) Series JP01-2000, JP02-2000, JP07-2000, JP08-2000 Series JP03-2000, JP04-2000, JP09-2000, JP010-2000 DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACK PANELS FAX: 773 792-2129 LONG FRAME 1/4" MODULAR TWIN ROW JACK PANELS 209 * Please visit the product pages on our website for the most up-to-date product information LONG FRAME (1/4") MODULAR TWIN ROW JACK PANELS (continued) JACK PANELS Series JP052000, JP062000, JP112000, JP122000 DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 210 JACK PANELS LONG FRAME (1/4") MODULAR 3 ROW JACK PANELS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information LONG FRAME (1/4") MODULAR 3 ROW JACK PANELS Four series of cross-connect jack panels are available in 19" and 23" widths. Individual modules are easily dismounted from the front. On special order, panels can be supplied with a variety of standard telephone jacks. JACK PANELS SERIES JP312000 AND JPD312000 2.655" x 19" size for console, rack or control panel mounting. Mounts 24 twin jacks and 24 single jacks. Openings are on .625" centers in each row. A twin plug fits jacks horizontally or vertically in same quad. Bottom row has 24 single jacks. Two Kwik(R)-Change designation strips are supplied. Series JPD31 has pre-drilled and countersunk holes for mounting vertical designation strips. See "ORDERING". SERIES JP322000 AND JPD322000 Same as JP312000 and JPD312000, except 23" wide (includes 14 inserts which accommodate 28 twin jacks and 28 single jacks). MODULE INSERTS Available with 6 holes or blank faces. See "ORDERING" for colored modules. ORDERING Order basic assemblies by part number from table. On special order, various combinations of colored inserts mounted in basic panels, as well as many types of complete assemblies are possible. Provide complete details with your inquiry or order. Standard mount panels are available with holes pre-drilled for vertical designation strips, Series DS320. Add prefix "D" to part number (JPD312000, JPD322000, etc.). Refer to "DESIGNATION STRIPS". Mounting Screws: #6-32 P10725 for jack mounting and #4-40 P2435 for insert mounting can also be ordered separately. Contact Switchcraft. SPECIFICATIONS Panel and Designation Strips: Aluminum alloy, extruded. Black anodized per MIL-A-8625. Module Insert: Molded plastic, matte finish. Black standard; white, red, green, blue or yellow available on special order. Marking Strip: White matte finish plastic. Designation Strip Cover: Extruded clear plastic. Screws: #6-32 x 5/16" PHMS, for jack mounting; #4-40 x 1/2" phillips FHMS, for module insert mounting. Part Number Description JP312000 19" wide x 2.625" high panel with 12 black modules installed. Two, full width Kwik(R) -Change designation strips are included. JPD312000 Same as JP312000, except holes pre-drilled for mounting vertical designation strips at each side. JP322000 23" wide x 2.625" high panel with 14 black modules installed. Two, full width Kwik(R) -Change designation strips are included. JPD322000 Same as JP322000, except holes pre-drilled for mounting vertical designation strips at each side. Series JP312000, JPD312000, JP322000, JPD322000 DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACK PANELS TT-JAX (.173") JACK PANELS (R) FAX: 773 792-2129 211 * Please visit the product pages on our website for the most up-to-date product information TT-JAX(R) (.173") JACK PANELS SERIES 1600, A1600, B1600, C1600 SERIES B1600 and C1600 Jack Panels with optional jacks. (See next page for specific part numbers.) SERIES 1700 Jack Panel with optional jacks. (See next page for specific part numbers.) Series B1700 Jack Panel with optional jacks. (See next page for specific part numbers.) SERIES 1600 DOUBLE ROW JACK PANELS Black anodized panel has four inserts (24 single jacks). Double row configuration accommodates 96 total jacks (48 pairs). Jack spacing eliminates cross-patching of adjacent circuits when twin plugs are used. Panel size: 1.75" x 19". Four, KwikChange(R) designation strips for circuit identification supplied. SERIES A1600 DOUBLE ROW JACK PANELS Similar to Series 1600, except mounts 104 jacks. Jacks are spaced on .312" centers for maximum jack density. Four, Kwik-Change(R) designation strips supplied. SERIES B1600 THREE ROW JACK PANELS 2.625" x 19" panel size yields high density (144 jacks). Jacks are paired for single or twin plugs without cross-patching. Six, Kwik-Change(R) designation strips supplied. SERIES C1600 THREE ROW JACK PANELS Similar to B1600, except maximum jack density (156 jacks). Six, Kwik-Change(R) designation strips supplied. SERIES 1700 TWIN ROW JACK PANELS Standard 1.75" x 19" panel accepts 48 TT-Twin-Jax(R) jacks. Two, Kwik-Change(R) designation strips supplied. SERIES B1700 THREE ROW JACK PANELS Black thermoplastic UL 94V-0. Panel Insert: Thermoplastic polyester, UL 94V-0. Marking Strip: White matte finish plastic. Designation Strip Cover: Extruded clear plastic. ORDERING 1. Part number tables list jack panels with the most commonly used jack circuits. Custom jack panels can be built on special order to OEM requirements. Typical special order features are: * Lamp jack with incandescent or LED lamps. * Solder lug or wire-wrapping terminals. * Pre-printed designation strips. * TT-Switch(R) switches with wide switching selection. 2. Contact Switchcraft for all special order items. SPECIFYING NOTE: Prefix letter "D" on part number indicates panels are drilled for mounting vertical designation strips on both ends. EXAMPLE D1600, AD1632B, WCD1634B (vertical designation strips not included). Order DS321 for 1.734" high panels; DS350 for 2.069" high panels. See "Designation Strips" section. The most commonly-used combinations of panels and jacks are listed on following page. 1600, A1600, B1600, C1600 panels can be assembled with many different "bantam type" jacks. Accepts 48 Tri-Jax(R) with alternate mounting centers to eliminate cross-patching between adjacent circuits. Panel size: 1.75" x 19". Two, Kwik-Change(R) designation strips supplied. SPECIFICATIONS Bussing type terminals which allow you to buss jacks quickly and easily are available on special order. SERIES 1600, A1600, B1600, 1700, B1700 Panel and Designation Strip: Aluminum alloy, extruded. Per QQ-A-200/8. Black anodized per MIL-A-8625C. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 JACK PANELS SERIES 1600 and A1600 Jack Panels with optional jacks. (See next page for specific part numbers.) 212 JACK PANELS TT-JAX (.173") JACK PANELS (R) PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information TT-JAX(R) (.173") JACK PANELS - SERIES 1600, A1600, B1600, C1600 (continued) Jack Data1 Panel Data JACK PANELS SERIES 1600 AND A1600 Part Number 1600 D1600 1632A D1632A 1632B D1632B W1632B WD1632B 1634B D1634B W1634B WD1634B A1600 AD1600 A1632B AD1632B A1634B AD1634B WA1634B WAD1634B Part Number w/o Jacks1 w/o Jacks1 TT32A TT32A TT32B TT32B WTT32B WTT32B TT34B TT34B WTT34B WTT34B w/o Jacks1 w/o Jacks1 TT32B TT32B TT34B TT34B WTT34B WTT34B Quantity 96 Part Number w/o Jacks1 w/o Jacks1 TT32B TT32B TT34B TT34B WTT34B Note 2 Note 2 Note 3 Note 3 Panel Data SERIES C1600 Dimensions Mount Standard 19" x 1.734" Part Number C1600 CD1600 C1634B CD1634B WC1634B WCD1634B Part Number w/o Jacks1 w/o Jacks1 TT34B TT34B WTT34B WTT34B Quantity Dimensions Mount 156 19" x 2.609" Standard Quantity Dimensions Mount 48 Twin-Jax(R) 19" x 1.734" Standard Quantity Dimensions Mount 48 Tri-Jax(R) 19" x 1.734" Standard SERIES 1700 Part Number 1700 D1700 1789 D1789 W1789 WD1789 104 Part Number w/o Jacks4 w/o Jacks4 TT89 TT89 WTT89 WTT89 SERIES B1700 SERIES B1600 Part Number B1600 BD1600 B1632B BD1632B B1634B BD1634B WBD1634B B1650 BD1650 WB1650 WBD1650 Jack Data Quantity Dimensions Mount 144 19" x 2.609" Standard 1. Accepts indicated number of single TT-Jax(R), TT-Switches(R), TT-Lamp-Jax(R) or any combination. 2. Three-row panel assembly with 96 TT34B Jax (top 2 rows); and 48 TT32B Jax (bottom row). 3. Same as Note 2 above, except jacks have wire-wrapping terminals. 4. Accepts 48 TT Twin-Jax(R). Part Number Part Number B1700 w/o Jacks5 BD1700 w/o Jacks5 B1795 TT95 BD1795 TT95 WB1795 WTT95 WBD1795 WTT95 B1796 TT96 BD1796 TT96 WB1796 WTT96 WBD1796 WTT96 PANEL INSERTS Part Number TT505 TT506 TT507 TT508 TT509 TT511 Insert Description Without jacks, 24 holes Blank Without jacks, 48 holes Blank Without jacks, 26 holes Without jacks, 72 holes For Panels A1600, B1600 1600, B1600, C1600 1700 1700 A1600, C1600 B1700 5. Accepts 48 TT Tri-Jax(R). Special order only; contact Switchcraft. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACK PANELS TT-JAX (.173") JACK PANELS (R) FAX: 773 792-2129 213 * Please visit the product pages on our website for the most up-to-date product information TT-JAX(R) (.173") JACK PANELS -SERIES 1600, A1600, B1600, C1600 (continued) JACK PANELS Series 1600 & A1600 Series B1600 & C1600 DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 214 JACK PANELS TT-JAX (R) (.173") JACK PANELS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information JACK PANELS TT-JAX(R) (.173") JACK PANELS - SERIES 1600, A1600, B1600, C1600 (continued) Series 1700 Series B1700 DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACK PANELS MODULAR TT-JAX (.173") PANELS (R) FAX: 773 792-2129 215 * Please visit the product pages on our website for the most up-to-date product information MODULAR TT-JAX(R) (.173") PANELS - BLANK SERIES TT51, TT53, TT56, TT59 SERIES TT51 SERIES TT59 SERIES TT53 Ten series of blank panels are available in 19" and 23" widths, standard or flush mounting, and double, twin or three row configurations. OEM's can order blank components and individual modules, jacks, switches and lamp jacks for production line assembly according to standard or special front panel configurations. Kwik-Change(R) designation strips are supplied with panels for custom legend marking. Flush mounting styles can use extension legs (on special order), for stand-off mounting from front of rack. Contact Switchcraft for Mounting Bracket Kit K107. SPECIFICATIONS Panel and Designation Mounting Strip: Aluminum alloy, extruded per QQ-A-200/8. Black anodized per MIL-A-8265C. Marking Strip: Matte finish white plastic. Designation Strip Cover: Extruded clear plastic. SPECIFYING NOTE: Part numbers in table are for blank panels only. ORDERING 1. Order by part number from table 2. Refer to jack section to specify other jacks and components. Series Number1 TT51 Description2 19" double row standard mount panel. Mounts 96 single jacks on 24 modules. TT53 19" three row standard mount panel. Mounts 48 Tri-Jax (R) jacks on 24 modules. TT54 23" three row standard mount panel. Mounts 56 Tri-Jax(R) jacks on 28 modules. TT55 19" double row flush mount panel. Mounts 96 single jacks on 24 modules. TT56 23" double row flush mount panel. Mounts 112 single jacks on 28 modules. TT58 23" three row flush mount panel. Mounts 56 Tri-Jax(R) jacks on 28 modules. TT59 19" twin row standard mount panel. Mounts 48 TT Twin-Jax (R) jacks on 24 modules. TT60 23" twin row standard mount panel. Mounts 56 TT Twin-Jax(R) jacks on 28 modules. TT61 19" twin row flush mount panel. Mounts 48 TT Twin-Jax(R) jacks on 24 modules. TT62 23" twin row flush mount panel. Mounts 56 TT Twin-Jax(R) jacks on 28 modules. Special order only. Contact Switchcraft. 1. Prefix TTD for standard mounting panels indicates predrilled holes for mounting "X Wide" vertical designation strips. See "Designation Strips" section. 2. Each panel includes integral designation mounting strip, marking strips and clear plastic covers. 3. Contact Switchcraft for any special order items. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 JACK PANELS SERIES TT56 216 JACK PANELS TT MODULE INSERTS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information JACK PANELS TT MODULE INSERTS - SERIES TT91, TT92 AND TT93 SERIES TT91 SERIES TT92 SERIES TT-93 TT91402 TT91202 TT91002 (black, 4 hole) (black, 2 hole) (black, blank) TT92402 TT92202 TT92002 (black, 4 hole) (black, 2 hole) (black, blank) TT93602 TT93302 TT93002 (black, 6 hole) (black, 3 hole) (black, blank) Module colors are black or gray (standard); red, green, blue, white and yellow available on special order. Each module has a matte finish front surface and includes two mounting screws (Switchcraft P2348). SERIES TT91 Choice of blank, two- or four-hole modules for double row panels Series TT51, TT55 and TT56. The following components are used with Series TT91 modules: 1. Front mount TT-Jax(R) jacks. 2. Front mount TT-Switch(R) switches Series TT300FM and WTT420FM. 3. Front mount TT Lamp Jax(R) lamp jacks TT420FM and WTT420FM. SERIES TT92 Blank, two- or four-hole modules for twin row panels Series TT59, TT60, TT61 and TT62. TT Twin-Jax(R) jacks are used with these modules. SERIES TT93 Blank, three- or six-hole modules for three row panels Series TT53, TT54, TT57 and TT58. Tri-Jax(R) jacks are used with these modules. SPECIFICATIONS Module: Precision molded thermosetting plastic in colors. Mounting Screws: Black zinc, #3-48 x .312" flat head machine screws. ORDERING SERIES TT91 (For Double Row Panels) Openings Color Red Black Green Blue White Yellow Gray 4 2 Blank TT91401 TT91402 TT91403 TT91404 TT91405 TT91408 TT91411 TT91201 TT91202 TT91203 TT91204 TT91205 TT91208 TT91211 TT91001 TT91002 TT91003 TT91004 TT91005 TT91008 TT91011 SERIES TT92 (For Twin Row Panels) Openings Color Red Black Green Blue White Yellow Gray 4 2 Blank TT92401 TT92402 TT92403 TT92404 TT92405 TT92408 TT92411 TT92201 TT92202 TT92203 TT92204 TT92205 TT92208 TT92211 TT92001 TT92002 TT92003 TT92004 TT92005 TT92008 TT92011 SERIES TT93 (For Three Row Panels) Color Openings 1. Order by part number from tables. 2. Contact Switchcraft for any special order items. SPECIFYING NOTE: The part numbers listed on this page are for modules only. Refer to following page for specifying panel assemblies with components installed. Red Black Green Blue White Yellow Gray 4 2 Blank TT93601 TT93602 TT93603 TT93604 TT93605 TT93608 TT93611 TT93301 TT93302 TT93303 TT93304 TT93305 TT93308 TT93311 TT93001 TT93002 TT93003 TT93004 TT93005 TT93008 TT93011 Special order only; contact factory for price and delivery. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACK PANELS MODULAR TT-JAX (.173") JACK PANELS (R) FAX: 773 792-2129 217 * Please visit the product pages on our website for the most up-to-date product information MODULAR TT-JAX(R) (.173") JACK PANELS - SERIES TT5102000, TT5202000, TT5502000, TT5602000 Series TT5102000, TT5202000 (Typical) SERIES TT5102000* Jack Data Modular double row, 1.75" high x 19" wide, standard mount. Supplied with 24 black modules, designation strips, and covers. Mounts 96 TT-Jax(R) single jacks, lamp jacks and/or switches. SERIES TT51020001* Modular double row, 1.75" high x 19" wide, standard mount. Supplied with 24 black modules, designation strips, and covers. Mounts 96 TT-Jax(R) single jacks, lamp jacks and/or switches. Comes supplied with cable tie bar. SERIES TT5202000* Similar to TT5102000, except 23" wide. Supplied with 28 black modules, designation strips, and covers. Mounts 112 TT-Jax(R) single jacks, jack lamps and/or switches. SERIES TT5502000 Modular double row, 1.75" high x 19" wide, flush mount. Supplied with 24 black modules, designation strips, and covers. Panels can be mounted flush with rack/control panel surface, or use with extension legs for standoff mounting with easy access to rear of jacks for testing/monitoring. Mounts 96 TT-Jax(R) single jacks, lamp jacks and/or switches. SERIES TT5602000 Similar to TT5502000, except 23" wide. Supplied with 28 black modules, designation strips, and covers. Mounts 112 TT-Jax(R) single jacks, jack lamps and/or switches. ORDERING 1. Order part number from table 2. Contact Switchcraft for any special order items. 3. Separate components can be ordered. * Prefix TTD indicates panel is pre-drilled with countersunk holes for mounting "X-Wide" vertical designation strips. See "DESIGNATION STRIPS" section. Panel Data Part Number Part Number Qty. TT5102000 TT5102S31 TT5102W31 TT5102S32A TT5102W32A TT5102S32B2 TT5102W32B TT5102S33B TT5102W33B TT5102S34B2 TT5102W34B TTD5102000 TTD5102S31 Through TTD5102W34B TT5202000 TTD5202000 TT5202S31 Through TT5202W34B TTD520231 Through TTD5202W34B TT552000 TT5502S31 Through TT5502W34B TT5602000 TT5602S31 Through TT5602W34B without jacks TT31FM WTT31FM TT32AFM WTT32AFM TT32BFM WTT32BFM TT33BFM WTT33BFM TT34BFM WTT34BFM without jacks 0 96 Width Mount Modules 19" Standard 24 (Black) 23" Standard 28 (Black) 19" Flush 24 (Black) 23" Flush 28 (Black) 0 Note1 96 without jacks 0 Note1 112 Note1 without jacks 0 Note1 96 without jacks 0 Note1 112 Special order only; contact Switchcraft for price and delivery. 1 Complete panel part number with jacks installed can be constructed as shown for Series TT51. 2. Add a "1" to part number to specify cable tie bar. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 JACK PANELS Series TT5502000, TT5602000 (Typical) Shown w/mounting bracket K107 (not supplied). 218 JACK PANELS (R) MODULAR TT-JAX (.173") JACK PANELS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information JACK PANELS MODULAR TT-JAX(R) (.173") JACK PANELS - SERIES TT5102000, TT5202000, TT5502000, TT56020000 (continued) Series TT51-02000, TT52-02000 (Typical) Series TT55-02000, TT56-02000 (Typical) Jack Panel Dimensions - inch (mm) Series Number TT51 TT52 TT55 TT56 19 23 19 23 A (482.6) (584.2) (482.6) (584.2) 18.3 22.3 18.3 22.3 B (465.1) (566.7) (465.1) (566.7) C 1.013 (25.7) 1.648 (41.9) 1.013 (25.7) 1.648 (41.9) D 17.125 (435) 21.125 (536.6) Special order only; contact Switchcraft for price and delivery. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery FAX: 773 792-2129 JACK PANELS TT-JAX (.173") TWIN ROW AND THREE ROW JACK PANELS (R) 219 * Please visit the product pages on our website for the most up-to-date product information TT-JAX(R) (.173") TWIN ROW AND THREE ROW JACK PANELS Series TT5902000 Jack Data Series TT6102000 SERIES TT5902000* Modular twin row, 1.75" high x 19" wide, standard mount. Supplied with 24 black modules, designation strips, and covers. Mounts 48 TT Twin-Jax(R) twin jacks. SERIES TT6002000* Similar to TT5902000, except 23" wide. Supplied with 28 black modules, designation strips, and covers. Mounts 56 TT Twin-Jax(R) twin jacks. SERIES TT6102000 Modular twin row, 1.75" high x 19" wide, flush or standoff mount. Supplied with 24 black modules, designation strips, and covers. Mounts 48 TT Twin-Jax(R) twin jacks. SERIES TT6202000 Similar to TT6102000, except 23" wide. Supplied with 28 black modules, designation strips, and covers. Mounts 56 TT Twin-Jax(R) twin jacks. SERIES TT5302000* Modular three row, 1.75" high x 19" wide, standard mount. Supplied with 24 black modules, designation strips, and covers. Designed for LINE, EQUIP and MONITOR patch connections. Mounts 48 Tri-Jax(R) triple jacks. SERIES TT5402000* Similar to TT5302000, except 23" wide. Supplied with 28 black modules, designation strips, and covers. Mounts 56 Tri-Jax(R) triple jacks. SERIES TT5702000 Modular three row, 1.75" high x 19" wide, flush or standoff mount. Supplied with 24 black modules, designation strips, and covers. Mounts 48 Tri-Jax(R) triple jacks. SERIES TT5802000 Similar to TT5702000, except 23" wide. Supplied with 28 black modules, designation strips, and covers. Mounts 56 Tri-Jax(R) triple jacks. ORDERING 1. Order part number from table 2. Contact Switchcraft for any special order items. *Prefix TTD indicates panel is pre-drilled with countersunk holes for mounting "X-Wide" vertical designation strips. See "DESIGNATION STRIPS" section. Part Number Part Number Qty. TT5902000 TT5902S89 TT5902W89 TTD5902000 TTD5902S89 TTD5902W89 TT6002000 TTD6002000 TT6002S89 TT6002W89 TTD6002S89 TTD6002W89 TT6102000 TT6102S89 TT6102W89 TT6202000 TT6202S89 TT6202W89 TT5302000 TT5302S95 TT5302W95 TT5302S96 TT5302W96 TTD5302000 TTD5302S95 Through TTD5302W96 TT5402000 TTD5402000 TT5402S95 Through TT5402W96 TTD5402S95 Through TTD5402W96 TT5702000 TT5702S95 Through TT5702W96 TT5802000 TT5802S95 Through TT5802W96 without jacks TT89FM WTT89FM without jacks TT89FM WTT89FM 0 without jacks Width Mount Modules Standard 24 (Black) Flush 28 (Black) 19" Standard 24 (Black) 23" Standard 28 (Black) 19" Flush 24 (Black) 23" Flush 28 (Black) 48 0 19" 48 0 Note 1 56 Note1 56 None 0 Note1 48 without jacks 0 Note1 56 without jacks TT95FM WTT95FM TT96FM WTT96FM without jacks 0 48 Note2 48 without jacks 0 23" 19" 23" 0 Note2 56 Note2 without jacks 0 Note2 48 without jacks 0 Note2 56 Special order only; contact Switchcraft for price and delivery. 1. Complete panel part number with jacks installed can be constructed as shown for Series TT59 or TTD59. 2. Complete panel part number with jacks installed can be constructed as shown for series TT53. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 JACK PANELS Series TT5302000, TT5402000 (Typical) Panel Data 220 JACK PANELS TT-JAX (R) (.173") TWIN ROW AND THREE ROW JACK PANELS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information TT-JAX(R) (.173") TWIN ROW AND THREE ROW JACK PANELS (continued) JACK PANELS Series TT5902000 and TT6002000 (Typical) Jack Panel Dimensions - inch (mm) Series Number TT59 TT60 TT61 TT62 19 23 19 23 A (482.6) (584.2) (482.6) (584.2) 18.3 22.3 22.3 22.3 B (465.1) (566.7) (566.7) (566.7) C 1.013 (25.7) 1.648 (41.9) 1.013 (25.7) 1.648 (41.9) D 17.125 (435) 21.125 (536.6) Series TT6102000 and TT6202000 (Typical) Series TT5302000 and TT5402000 (Typical) Jack Panel Dimensions - inch (mm) Series Number TT53 TT54 TT57 TT58 19 23 19 23 A (482.6) (584.2) (482.6) (584.2) 18.3 22.3 22.3 22.3 B C D Series TT5702000 and (465.1) 1.013 (25.7) TT5802000 (Typical) (566.7) 1.648 (41.9) (566.7) 1.013 (25.7) 17.125 (435) (566.7) 1.648 (41.9) 21.125 (536.6) Series TT5702000 and TT5802000 (Typical) DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACK PANELS TT-JAX (.173") CONNECTORIZED JACKFIELDS (R) FAX: 773 792-2129 221 * Please visit the product pages on our website for the most up-to-date product information TT-JAX(R) (.173") CONNECTORIZED JACKFIELDS - SERIES TT, 2-WIRE, 4-WIRE, 6-WIRE 6-wire TT-Connectorized Jackfield 4-wire TT-Connectorized Jackfield TT4W24MCF1 2-WIRE TT-CONNECTORIZED JACKFIELDS, SERIES TT Contains 48, 2-wire circuits. Arrangements include: LINE-DROP or Signal E/M, or LINE-DROP-MON. Available with MONITOR jack row. On rear panel, LINE connectors are receptacles and DROP connectors are plugs. LINE and DROP circuits may be isolated from each other for separate monitoring. On special order, 48 circuits LINE/COMBINATION DROP/MON or 96 circuits, LINE/DROP or Signal E/M may be specified. 2-WIRE TT-CONNECTORIZED PC JACKFIELD, SERIES TTPC Same as 2-Wire TT-connectorized jackfields above, except all connections are machine-soldered on a double-sided PC board instead of hand wired. 6-WIRE TT-CONNECTORIZED JACKFIELDS, SERIES TT 6-Wire jackfields contain 48, 6-wire circuits for MOD-DEM/EQ IN EQ OUT/MON/SIG LINE/SIG EQ patching with toll test boards. Available with or without MONITOR jack row. On rear panel, MOD, EQ IN and SIG LINE connectors are receptacles and DEM, EQ OUT and SIG EQ connectors are plugs. The following can be specified on special order: 12 circuits, DEM-MOD/EQ IN-EQ OUT/MON/SIG E/M; 48 circuits, signal E/M leads separated; 48 circuits for D3 channel banks. ORDERING 1. Order by part number from tables. 2. Contact Switchcraft for any special order items. 4-WIRE TT-CONNECTORIZED JACKFIELDS, SERIES TT 4-Wire jackfields have 24, 4-wire circuits for MOD-DEM/EQ IN-EQ OUT/MON patching, or may be used for other 4-wire patching applications. Can be supplied with or without MONITOR jack row. On rear panel, MOD AND EQ IN connectors are receptacles and DEM and EQ OUT connectors are plugs. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 JACK PANELS 2-wire TT-Connectorized Jackfield TT2W48VCF1 222 JACK PANELS (R) TT-JAX (.173") CONNECTORIZED JACKFIELDS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information TT-JAX(R) (.173") CONNECTORIZED JACKFIELDS - SERIES TT, 2-WIRE, 4-WIRE, 6-WIRE (continued) JACK PANELS SPECIFICATIONS Panel and Integral Designation Strip: Aluminum alloy, extruded per QQ-A-200/8. Black anodized per MIL-A-8265. Modules: Precision-molded thermosetting plastic. Black standard. Other colors on special order. Mounting Screws: Black zinc, #3-48 x 312" flat head machine screw. TT-Jax(R) Jacks: See jacks section for TT-Jax(R) specifications. Marking Strip: Matte finish white plastic. Vertical Designation Strip: Extruded aluminum, black anodized. Back Frames: Cold rolled steel, zinc-plated with iridescent tarnish-resistant finish. Screws, Nuts and Lockwashers: Steel, clear iridite tarnish-resistant finish over zinc-plating. Connectors: 50-pin micro/pierce plugs and receptacles. Cable Tie Bar: Aluminum hexagon alloy. 6061-T6, clear iridite finish per MIL-C-5541 (not hinged versions only). Cables: 25 pair, 24 AWG solid copper wire, tinned and annealed, covered with insulating grade thermoplastic jacket. Cable Ties: Thermoplastic, locking-non-releaseable, 30 pounds minimum loop tensile strength. 2- & 4-Wire Connectorized Jackfields (4-Wire Style Shown) DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACK PANELS TT-JAX (.173") CONNECTORIZED JACKFIELDS - PART NUMBERS (R) FAX: 773 792-2129 223 * Please visit the product pages on our website for the most up-to-date product information TT-JAX(R) (.173") CONNECTORIZED JACKFIELDS (continued) PART NUMBERS 1. Compose part numbers from data below to specify your jackfield...or use the table to order popular jackfields. 2 T JACK TYPE TT - .173" JP - LONG FRAME (1/4") W UNIT TYPE 2W - 2 WIRE 4W - 4 WIRE 6W - 6 WIRE 2 4 V C NUMBER OF CIRCUITS 12 24 48 96 MONITOR JACK V - WITHOUT M - WITH F 1 RACK MOUNTING 1 - 19 inch 2 - 23 inch TYPE OF HINGE F - FRONT PANEL HINGED R - REAR PANEL HINGED N - NON-HINGED WIRE TERMINATION C - AMPHENOL BLUE RIBBON B - AMP CHAMP W - TERMINAL BLOCK TYPICAL PART NUMBERS 2-WIRE JACKFIELDS Part Number TT2W48VCF1 TT2W48VCN1 TT2W48MCF1 TT2W48MCN1 Description Hinged front panel. Front panel NOT hinged. Same as TT2W48VCF1, except with MONITOR jack row. Same as TT2W48VCN1, except with MONITOR jack row. 4-WIRE JACKFIELDS Part Number TT4W24MCF1 TT4W24MCN1 TT4W24VCF1 TT4W24VCN1 Description Hinged front panel with MONITOR jack row. Front panel NOT hinged with MONITOR jack row. Same as TT4W24MCF1, except no MONITOR jack row. Same as TT4W24MCN1, except no MONITOR jack row. 6-WIRE JACKFIELDS Part Number TT6W48MCF1 16J1055 TT6W48MCN1 TT6W48VCF1 TT6W48VCN1 Description Hinged front panel with MONITOR jack row. Hinged front panel with MONITOR jack row. Front panel NOT hinged with MONITOR jack row. Same as TT6W48MCF1, except no MONITOR jack row. Same as TT6W48MCN1, except no MONITOR jack row. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 JACK PANELS T SPECIFYING NOTE: Any jackfield can be manufactured with AMP CHAMP connectors. Contact Switchcraft. 224 JACK PANELS TT-JAX(R) (.173") CONNECTORIZED JACKFIELDS SCHEMATICS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information TT-JAX(R) (.173") CONNECTORIZED JACKFIELDS (continued) JACK PANELS TYPICAL CIRCUIT ARRANGEMENTS - 2-WIRE TYPICAL CIRCUIT ARRANGEMENTS - 4-WIRE TYPICAL CIRCUIT ARRANGEMENTS - 6-WIRE DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery FAX: 773 792-2129 JACK PANELS TT-JAX (.173") CONNECTORIZED JACKFIELDS SCHEMATICS (R) 225 * Please visit the product pages on our website for the most up-to-date product information TT-JAX (.173") CONNECTORIZED JACKFIELDS (continued) (R) No. TT2W48VCF1 (hinged) No. TT2W48VCN1 (not hinged) (Hinged version shown) JACK PANELS TYPICAL CIRCUIT ARRANGEMENT No. TT2W48MCF1 (hinged) No. TT2W48MCN1 (not hinged) (Non-Hinged version shown) TYPICAL CIRCUIT ARRANGEMENT DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 226 JACK PANELS TT-JAX (R) (.173") CONNECTORIZED JACKFIELDS SCHEMATICS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information TT-JAX(R) (.173") CONNECTORIZED JACKFIELDS (continued) JACK PANELS No. TT4W24VCF1 (hinged) No. TT4W24VCN1 (not hinged) (Hinged version shown) TYPICAL CIRCUIT ARRANGEMENT No. TT4W24MCF1 (hinged) No. TT4W24MCN1 (not hinged) (Non-Hinged version shown) TYPICAL CIRCUIT ARRANGEMENT DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery FAX: 773 792-2129 JACK PANELS TT-JAX (.173") CONNECTORIZED JACKFIELDS SCHEMATICS (R) 227 * Please visit the product pages on our website for the most up-to-date product information (R) TT-JAX (.173") CONNECTORIZED JACKFIELDS (continued) No. TT6W48MCF1 (hinged) No. TT6W48MCN1 (not hinged) (Hinged version shown) No. TT6W48VCF1 (hinged) No. TT6W48VCN1 (not hinged) JACK PANELS TYPICAL CIRCUIT ARRANGEMENT No. TT6W48MCF1 (hinged) No. TT6W48MCN1 (not hinged) (with Monitor Jacks) No. TT6W48VCF1 (hinged) No. TT6W48VCN1 (not hinged) (no Monitor Jacks) DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 228 JACK PANELS (R) TT-JAX (.173") CONNECTORIZED JACKFIELDS SCHEMATICS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information JACK PANELS TT-JAX(R) (.173") CONNECTORIZED JACKFIELDS REAR VIEW --ROTATED No. 16J-1055 TYPICAL CIRCUIT ARRANGEMENTS DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery FAX: 773 792-2129 (R) JACK PANELS TT-JAX (.173") CONNECTORIZED JACKFIELDS 229 * Please visit the product pages on our website for the most up-to-date product information TT-Jax(R) (.173") CONNECTORIZED JACKFIELDS JACK PANELS DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 230 JACK PANELS TT(R) LAMPS AND JEWEL ASSEMBLIES PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information TT(R) LAMPS AND JEWEL ASSEMBLIES Steady "On" Lamp Series TT450 Blinking/Steady "On" Lamp SCHEMATIC JACK PANELS SERIES TT-450 LAMPS Red LED and series dropping resistor are molded into compact cartridge with bi-pin terminals for use with TT Lamp-Jax(R) lamp jacks. Colored bezels are molded in for color coding of functions; colors are black, red, green, white and yellow. On special order, blue or other colors are available. TT-LED Lamps Installed Standard voltages are 6, 24 and 48 V (DC only). No tools are required for lamping/relamping. Simply slip TT-LED into lamp jack with (+) terminal up. If it doesn't light, remove it, rotate it 180, and reinsert it into jack. FLASHING/STEADY ON LEDS SPECIFICATIONS SPECIFICATIONS Housing: Molded black plastic. Bezel: Molded plastic in colors. LED: Red illumination. Pins: T-1 3/4 bi-pin configuration. Part Number TT45106 TT45106 TT45248 TT45406 TT45124 TT45548 TT45148 TT45206 TT45224 TT45248 TT45306 TT45324 TT45348 Bezel Body: Thermoplastic, UL 94V-0 rated. LED Colors: Yellow, green or red. Part Voltage Color Number TT45124 TT45148 TT45206 TT45224 Voltage 6 TT45324 TT45348 TT45406 6 TT45306 TT45424 TT45524 RedTT4506 24 TT45448 TT45424 24 TT45806 48 TT45824 TT45848 TT45448 48 6 24 48 6 24 48 Black Green Yellow, green and red LEDs are 2-pin cartridge plug-ins which operate from a 48 VDC supply. When 48 V is applied, LED flashes for 30 seconds, then changes to steady "On" condition. TT45506 TT45524 TT45548 TT45806 TT45824 TT45848 6 24 48 6 24 48 Bezel Color Blue White Part Number 15J9068 15J9076 15J9077 15J9078 Description Red flashing/continuous Yellow flashing/continuous Green flashing/continuous Amber flashing/continuous TT-JEWEL ASSEMBLY Yellow ORDERING 1. Order by part number from table. 2. For special order items, such as other LED colors, voltages, lamps with 25% reduced power consumption, etc., contact Switchcraft. Panel with TT-Jewel Assemblies and TT-Switches installed Jewel assemblies use bi-pin lamp and act as lighted jewel and lamping/relamping tool. Simply slip bi-pin lamp in brass collar and insert lamp with pins in vertical plane. Lamp automatically seats properly. Jewel is molded plastic in colors; sleeve is brass. Series TT-450 TT-LED Lamps Part Number TT401 TT403 TT404 TT405 Color Red Green Blue White Part Number Color TT408 Yellow TT413 Amber TT510 Black* *Used as hole plug where no jack is installed. LAMPS Flashing/Steady "On" Lamps Part Number P2290 P2315 P2316 P2456 DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Description 6.3 V, GE No. 7377. 6.3 V, GE No. 7381. Avg. life: 50K hrs. @ 200 mA. 28 V, GE No. 7387. Avg. life: 25K hrs. @ 40 mA. 24 V, GE No. 7001. Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACK PANELS LONGFRAME SWITCHBOARD SWITCHES FAX: 773 792-2129 231 * Please visit the product pages on our website for the most up-to-date product information LONGFRAME SWITCHBOARD SWITCHES SERIES 11000 and 11200 SPECIFICATIONS Frame, Screws and Twin Nut: Steel, plated. Springs, Pressure Plate and Terminals: Copper alloy. Solder lugs are tin-dipped. Contacts: Welded crossbar palladium are standard. Fine silver or gold alloy are available on special order. Insulation: Rigid plastic. Extruded plastic tubing through stack. Knob: Molded black plastic. Turn-key type faced with white arrow. Bushing: Copper alloy, nickel-plated. W11012L 11206L Part Numbers Locking Momentary Circuit PUSHBUTTONS - SERIES 11000 11001L 11002L 11003L W11003L 11003DL 11004L 11005L 11006L W11006L 11006DL 11008L 11009L 11012L W11012L ORDERING 1-A 1-B 11001 11002 11003 W11003 11003D 11004 11005 11006 W11006 11006D 11008 11009 11012 W11012 1-C 1-D 2-A 2-B 2-C 2-D 4-A 3-C 4-C TURN BUTTONS - SERIES 11200 1. Order by part number from table. 2. For special order items, contact Switchcraft. 11201L 11202L 11203L W11203L 11203DL 11204L 11205L 11206L W11206L 11206DL 11208L 11209L 11212L W11212L 1-A 1-B 11201 11202 11203 W11203 11203D 11204 11205 11206 W11206 11206D 11208 11209 11212 W11212 1-C 1-D 2-A 2-B 2-C 2-D 4-A 3-C 4-C Special order only; contact Switchcraft. Mounting Screws: #6-32, P10725, can be ordered separately. Contact Switchcraft. (Screws not supplied with switches.) "T-Switch" Switches A B C E D Basic Schematic Circuits DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 F JACK PANELS Premium quality, long frame switches, designed especially for jack panel mounted switching. Standard actuations are push-lock/pull-release, 2-position turn button and 3 position turn button. Many contact forms available. Mounts in Switchcraft Jack Panels Series 1200, 1400, 2400, 2600, 2800, modular JP (R) jack panels, and other standard telephone jack panels. Part numbers in table indicate "A" frame. For same switch with "C" frame, add prefix "C" to part number. Many circuit forms not shown in tables are available on special order. Long leaf springs have no forms at point of flexing, which insures long life. Welded crossbar palladium contacts rated at 2A 200W maximum are standard. Fine silver (for higher currents) or gold alloy (dry circuit to 1A) contacts are available on special order. Contact Switchcraft. 232 JACK PANELS DUMMY PLUGS AND HOLE PLUGS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information JACK PANELS DUMMY PLUGS AND HOLE PLUGS 491 492 When inserted into a standard size telephone jack, the dummy plug actuates springs like a normal plug, except no signal is conducted through since the plug is made of non-conducting plastic. Dummy plugs can also be used to plug-up unused jacks to prevent accidental insertion of an incorrect plug. SERIES 491: 3-conductor with .206" diameter finger. Mates with MT342B and MT344B MT-Jax(R), Series M Hi-D Jax(R), and other standard telephone jacks having .21" inside diameter sleeves. SERIES 492: 3-conductor with .25" diameter finger. Mates with 3-conductor MT-Jax(R) and Series M Hi-D Jax(R), and other standard telephone jacks have .25" inside diameter sleeves. 493 Part Number Part No. 49101 49102 49105 49201 49202 49205 49301 49302 49305 Description Conductors 3 3 3 3 3 3 2 2 2 Color Red Black White Red Black White Red Black White Interchangeable with WEco Trimm - - - - - - 258F 558D 258C 558C 258E 558E 165F 556D 165C 556C 165E - SERIES 493: 2-conductor with .25" diameter finger. Mates with 2-conductor MT-Jax(R), Series M Hi-D Jax(R), and other standard telephone jacks having .25" inside diameter sleeves. No. 491 No. 492 No. 493 PLASTIC HOLE PLUG Hole Plug P1801 Used to seal off unused holes in jack panels, Series 1200, 1400, 2400, 2600 and JP012000 through JP122000. Constructed of dimensionally stable molded black plastic. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACK PANELS (R) TT (BANTAM) CIRCUIT GUARD PLUGS FAX: 773 792-2129 233 * Please visit the product pages on our website for the most up-to-date product information TT(R) (BANTAM) CIRCUIT GUARD PLUGS APPLICATION Circuit guard plugs are available in three different designs: Series TT512, Series TT513 and Series TT514. All three designs are molded thermoplastic and are available in the following colors: red, black, green, blue, white or yellow. Base SERIES TT512 TT512 circuit guard plugs cover an individual jack opening and insert to an virtually flush position with the front panel. Marking Strip Cover Series 514 SERIES TT513 TT513 circuit guard plugs are similar to the Series TT512 except the button extends .219" from the front of the panel for easier removal. Series TT512 Series TT513 SERIES TT514 TT514 circuit guard plugs cover both the IN and OUT jacks of two adjoining circuits while leaving the monitor jacks exposed for circuit testing. The four jack circuit guard plugs also include a matte finish white plastic marking strip and a clear extruded plastic window for additional designation. SPECIFICATIONS Part Number TT5121 TT5122 TT5123 TT5124 TT5125 TT5128 Part Number TT5131 TT5132 TT5133 TT5134 TT5135 TT5138 Part Number TT5141* TT5142* TT5143* TT5144* TT5145* TT5148* Color Red Black Green Blue White Yellow *Includes base, marking strip & cover. TT512 and TT513: Molded thermoplastic in colors. TT514: Base: Molded thermoplastic in colors. Marking Strip: Matte finish white plastic. Cover: Clear extruded plastic. ORDERING 1. Order by part number from table. 2. Contact Switchcraft for any special order items. Series TT-512 Series TT-513 DIMENSIONS ARE FOR REFERENCE ONLY Series TT-514 Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 JACK PANELS Circuit guard plugs snap into TT-Jax(R) (bantam) jacks eliminating accidental or unauthorized insertion of a plug into a critical circuit. The circuit guards plugs do not actuate the jack springs. These plugs seal the jack bushing and provide an additional means of circuit identification. 234 JACK PANELS MINIATURE, DUMMY PLUGS, HOLE PLUGS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information MINIATURE, DUMMY PLUGS, HOLE PLUGS TT5152 or TT206 JACK PANELS TT203 TT-Terminating Plug TT205 TT-Dummy Plug TT207 TT-Twin Looping Plug Terminating, dummy and looping plugs are designed for use with Tini-Telephone(R) Jacks. TT-Phone Plugs are also recommended for use on other miniature telephone jacks with same bushing inside diameter and compatible tip and/or ring spring configurations. TT-TERMINATING PLUGS TT-Phone Plug terminating plugs are used to terminate a circuit with a specific resistive load. A precision 1/2 watt, 1% resistor is molded into the handle of each terminating plug. See "PLUG SCHEMATICS" for resistor wiring. Resistance value is marked on plug handle. Other resistance values are available on special order. TT-DUMMY PLUGS TT-Phone Plug dummy plugs are designed to be inserted into phone jacks to actuate shunt and isolated switching circuits. TT-LOOPING PLUGS TT-Phone Plug looping plugs are used to loop or patch adjacent jack circuits. See "PLUG SCHEMATICS" for wiring. TT-HOLE PLUG TT-Hole Plugs are used to close off unused openings in all Switchcraft TT-Jack Panels. Molded of black plastic with brass sleeve. TT515 TT-Dummy Plugs TT510 Hole Plug TT210 ORDERING 1. Order by part number from table. 2. Contact Switchcraft for any special order items. SPECIFICATIONS Series TT200 Tip Rod, Ring and Sleeve: Brass per QQ-B-626. Handle: Molded PVC, ivory or black. Series TT515: Molded of dimensionally stable plastic in black, red or white. Part No. TT201 TT202 TT203 TT204 TT205 TT206 TT207 TT208 TT209 TT210 TT510 TT5151 TT5152 TT5155 Description 2-conductor terminating-135 2-conductor terminating-600 3-conductor terminating-135 3-conductor terminating-600 2-conductor dummy 3-conductor dummy 2-conductor twin looping 3-conductor twin looping 2-conductor twin dummy 3-conductor twin dummy Hole Plug 2- or 3-conductor dummy 2- or 3-conductor dummy 2- or 3-conductor dummy Schematic 1 1 2 2 5 6 3 4 5 6 - - - - Color Gray Gray Gray Gray Gray Gray Gray Gray Ivory Ivory Black Red Black White Special order only; contact Switchcraft for price and delivery. Plug Schematics 1 2 3 4 5 6 Nos. TT-201, TT-202, TT-205 Nos. TT-207, TT-209 Nos. TT-515-1, -2 Nos. TT-203, TT-204, TT-206 Nos. TT-208, TT-210 Nos. TT-510 DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACK PANELS DESTINATION STRIPS FAX: 773 792-2129 235 * Please visit the product pages on our website for the most up-to-date product information DESIGNATION STRIPS JACK PANELS Designation strips with protective covers are supplied with all tini-telephone(R) jack panels, jackfields and certain standard jack panels. Replacement kits and individual parts are also available. Legends can be marked in pencil, ink, or lettering transfers. Kwik-Change(R) is the name of all horizontal strips. See illustration. Three types of designation strips are available as accessories: 1. Kwik-Change single height. 2. Kwik-Change double height. 3. X-Wide vertical. KWIK-CHANGE(R) DESIGNATION STRIPS (SINGLE HEIGHT) Two types of single height designation strips are available: 1. SERIES 1600, A1600, B1600, C1600, 1700, B1700, 1400300, 2600300, JP012000 through JP122000 * Extruded aluminum mounting strip * Four mounting screws * Marking strips * Clear plastic strip covers Mounting strips are fastened with four mounting screws provided. Marking strip slides into the clear plastic cover, and cover is snapped into place on the mounting strip. Legends can be marked in pencil, ink, lettering transfers, typewriter, etc. Kwik-Change Designation Strip Kit Number DS301 (single height) SPECIFICATIONS (Used on panels 1600, A1600, B1600, C1600, 1700, B1700) Mounting Strip: Extruded aluminum black anodized Cover: Clear extruded plastic. Marking Strip: White matte finish plastic. Screws: Copper alloy, plated. (Used on panels 1400300, 1600300) Mounting Strip: Aluminum alloy, extruded, black anodized. Cover: Clear extruded plastic. Marking Strip: White matte finish plastic. Screws: Steel, plated. Kwik-Change Designation Strip Kit Number DS318 (single height) SERIES TT51 through TT62, TT-Connectorized (2-, 4- and 6-Wire), JP012000 through JP122000, TTPC and DSX panels. Mounting strips are extruded as part of the panel. Otherwise, use is the same as above. ORDERING Order by part number from table. Kwik-Change Designation Strip Kit Number TT501 (single height) Kwik-Change Designation Strip Kit Number TT516 (single height) DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 236 JACK PANELS DESIGNATION STRIPS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information DESIGNATION STRIPS (continued) SINGLE HEIGHT DESIGNATION STRIPS JACK PANELS Part No. TT501 TT502 TT503 TT504 TT519 TT520 TT521 Description Kits (single height) includes: 1-mounting strip (8.375" long) 1-cover 1-marking strip sheet (5 strips per sheet) 4-mounting screws Marking Strip sheet (used with Kit TT501 & TT521) Cover (used with Kit TT501 and TT504) Kits (single height) includes: 1-mounting strip (8.375" long) 1-cover 1-marking strip sheet (5 strips per sheet) 4-mounting screws Kit (single height) includes: 2-covers (9.61" long) 1- marking strip sheet (5 strips per sheet) Marking strip sheet (used with Kit TT519) Kit (single height) includes: 2-covers (8.25" long) 1- marking strip sheet (5 strips per sheet) For Panels 1600, 1700 (Alternate spacing) - Part No. DS301 Description Kit (single height) includes: 1-mounting strip (17" long) 1-cover 1-marking strip sheet (5 strips per sheet) 4-mounting screws Cover (used with Kit DS301) Marking strip sheet (used with Kit DS301 and DS316). Marking strip sheet (used with Kit DS307 and DS308). Kit (single height) includes: 2-covers (16.5" long) 1-marking strip sheet (5 strips per sheet) Kit (single height) includes: 2-covers (19.5" long) 1-marking strip sheet (5 strips per sheet) Kit (single height) includes: 2-covers (16.25" long) 1- marking strip sheet (5 strips per sheet) Marking strip sheet (used with Kit DS318). Kit (single height) includes: 2-covers (20" long) 1- marking strip sheet (5 strips per sheet) DS302 DS303 - DS306 A1600, C1600 (Continuous spacing) TT52, TT54 TT56, TT58 TT60, TT62 (23" Panels) - TT51, TT53 TT55, TT57 TT59, TT61, Connectorized Jackfields (2-, 4- and 6 wire) KWIK-CHANGE(R) DESIGNATION STRIPS (DOUBLE HEIGHT) Double height strips allow larger legends. Can be factory installed on Series 1600, B1600, 1700 and B1700 panels, or may be ordered separately for customer installation. * Series 1600/B1600: Four strips can be mounted, two above each row of jack openings. * Series 1700: Two strips can be mounted, two above or two below (special order) the double row of jack openings. * Series B1700: Two strips can be mounted (side-by-side) above top row of jacks. NOTE: When TT516 kits are mounted above top row of jacks on Series 1600, B1600 and B1700, strips will overhang top edge of panel by .156 inches For most applications, the strips help seal the normal opening between adjacent panels. Series B1700 panel mounting screws may have to be loosened to facilitate removal of the panel above it in this type of installation. SPECIFICATIONS Mounting Strip: Black thermoplastic UL 94V-0. Cover: Clear plastic. Marking Strip: Matte finish white plastic. Mounting Screws: Copper alloy, plated. DS307 DS308 DS316 DS317 DS318 For Panels 1400301, 2600301 - - - JP012000, JP032000, JP052000 JP022000, JP042000, JP062000 JP072000 JP092000, JP112000 - JP082000 JP102000, JP122000 Single Height Kwik-Change(R) Designation Strip, TT501 Series B1600 Double Height KwikChange Designation Strip, TT516 Series 1700 ORDERING 1. Order by part number from table. 2. To order double height strips installed on panels, contact Switchcraft. Series B1700 DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery JACK PANELS (R) KWIK-CHARGE DESIGNATION STRIPS - DOUBLE HEIGHT FAX: 773 792-2129 237 * Please visit the product pages on our website for the most up-to-date product information KWIK-CHANGE DESIGNATION STRIPS (DOUBLE HEIGHT) (R) Kwik-Change(R) Designation Strip DS311 (double height) Part No. DS311 DS312 DS313 Description Kit (double height) includes: 1-mounting strip (17" long) 1-cover 1-marking strip sheet (3 strips per sheet) 4-mounting screws Cover (used with Kit DS311) Marking strip sheet (used with Kit DS311) For Panels 2600310, 1400315 - - Part No. TT516 TT517 TT518 Description Kit (double height) includes: 1-mounting strip (8.375" long) 1-cover 1-marking strip sheet (3 strips per sheet) 4-mounting screws Marking strip sheet (used with Kit TT516) Cover (used with Kit TT516) X-WIDE(R) VERTICAL DESIGNATION STRIPS X-Wide designation strips mount on either side (or both) of standard 19" and 23" wide panels and do not interfere with horizontally mounted strips. Each kit contains two mounting brackets which easily fasten with mounting screws provided. Marking strips and clear plastic covers slide into place. Each kit fits onto both sides of a jack panel. X-Wide strips are used on the following panels: UNDRILLED 1600, A1600, 1700 B1700, TT51 through TT62, 2-, 4- & 6-Wire TT-Connectorized Jackfields, 2- & 4-Wire TTPC Connectorized Jackfields, 1200, 1400, 1400320, 2600,and 2600320. PREDRILLED D1600, D1700, BD1700, TTD51 through TTD62, 2- 4 & 6-Wire TT-Connectorized Jackfields, 2 & 4-Wire TTPC Connectorized Jackfields. 3-row Jack Panels Assembly with DS323 X-Wide Designation Strip installed SPECIFYING NOTES: Each kit fits both sides of a jack panel (Standard height 1.75". Also available in 3.5 inch and 5.25 inch heights. Prefix letter"D" indicates panels have been predrilled countersunk holes to facilitate mounting X-Wide strips. Series 1200, 1400, & 2600 can be predrilled on special order. Assembly sequence of DS323 X-Wide Designation Strip DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 For Panels 1600, B1600, 1700, B1700 - - JACK PANELS DOUBLE HEIGHT DESIGNATION STRIPS 238 JACK PANELS X-WIDE(R) VERTICAL DESIGNATION STRIPS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information X-WIDE(R) VERTICAL DESIGNATION STRIPS JACK PANELS DS351 DS353 X-WIDE VERTICAL DESIGNATION STRIPS Part No. Description For Panels DS321 Kit (.75 x 1.75 inches) includes: 2-mounting brackets 2-marking strips 2-covers 4-mounting screws, nuts and lockwashers DS322 Kit (.75 x 3.5 inches) includes: 2-mounting brackets 2-marking strips 2-covers 8-mounting screws, nuts and lockwashers Kit (.75 x 5.25 inches) includes: 2-mounting brackets 2-marking strips 2-covers 12-mounting screws, nuts and lockwashers Kit (.75 x 2.265 inches) includes: 2-mounting brackets 2-marking strips 2-covers 4-mounting screws, nuts and lockwashers Kit (.75 x 1.75 inches) includes: 1-marking strip 1-cover (Used on all 1.75 inch height connectorized jackfields except next to hinge) Kit same as DS351except narrow width. To be used next to hinge. Kit (.75 x 5.25 inches) includes: 1-marking strip 1-cover 1600, A1600 1700, B1700 TT51 thu TT54, TT59 thru TT62, 2- & 4-Wire TTConnectorized Jackfields, 2-, 4& 6-Wire TTPC Conntectorized Jackfields Same as DS321 (Mounted in pairs) DS323 DS350 DS351 DS352 DS353 6-Wire TTConnectorized and panels for DS321 B1600, C1600 ORDERING 1. Order by part number from table. 2. To order X-Wide(R) strips installed on panels, contact Switchcraft. 2-, 4- & 6-Wire Connectorized Jackfields, TTPC Connectorized Jackfields Same as DS351 6-Wire TTConnectorized Jackfields DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery PATCH CORDS & MOLDED CABLE ASSEMBLIES MOLDED CABLE ASSEMBLIES FAX: 773 792-2129 239 * Please visit the product pages on our website for the most up-to-date product information DESIGN MATERIALS AND FEATURES OEM COST SAVINGS Molded cable assemblies generally cost less than your in-house conventionally-fabricated assemblies. Specific advantages are elimination of: 1. Your evaluation, ordering, incoming inspection, and stocking of individual parts. 2. Your plant/equipment needs for in-house fabrication. 3. Your tooling/labor costs 4. Your production line QA/QC. MOLDED CABLE RELIABILITY In a series of OEM-conducted tests of Switchcraft versus non-molded, fabricated cables, Switchcraft cables were shown to be superior. 1. Fabricated cables broke at lower pull forces: OEM types - 24 to 34 pounds, molded cables - 37.5 to 41 pounds (molded cables did not break at terminations; the cable itself broke about one to two feet back from the connector). 2. Fabricated cables suffered broken wires at low pull-out force limits. Molded cables had cable breaks before cable pulled out of the handle, in most instances. And this failure occurred, as previously noted, at higher pull-out forces. Strengthened molded cable assemblies out-performed fabricated assemblies, and in fact, the crimp molding process makes it stronger than the wire itself. SPECIAL ORDER ITEMS * Customer Iogo * Panel Relief Bushing. Specify panel thickness and exact point on cable where bushing is to be installed. Standard panel opening is .50" (12.7 mm) diameter. Double flatted in panels up to .125" (3.18 mm) thick. * Molded Cable Clamp Bands or Y-Junctions. (Refer to page 258.) * Special Termination (see separate chart). Contact Switchcraft for specials and provide complete details. TYPES OF PLASTICS Thermoplastics used for molded cable assemblies, have excellent electrical and mechanical properties, are economical, convenient for molding, and can be provided in an array of colors. They have electrical characteristics far higher than required, and provide dimensional stability, abrasion and abuse resistance, and can be molded with a smooth mirror-like finish or matte or semi-matte finishes. WIRE AND CABLE Switchcraft provides over 100 types of wire and cable from which molded cable assemblies are manufactured. Basically, 30 different cables are used for standard tooling. There are no additional charges where standard tooling exists. Tooling is designed so cable entry openings on molded plastic handles fit tightly to the outside diameter of the cable. The tighter fit holds cable secure and is more resistant to abuse than if a larger opening were used. DESIGN AND FABRICATING TECHNIQUES Switchcraft's engineering staff is supported by a complete tool and die making facility, as well as a fully equipped and staffed molding department to fill all of Switchcraft's plastic molding requirements. The molding department uses injection molders of semi-automatic, multiple-cavity type to obtain high production rates. MANUFACTURING SEQUENCE (EXAMPLE) Step 1: The 1-piece tip rod is firmly staked into the phone plug finger assembly, making a complete and mechanically secure assembly. (Refer to Figure 1) The staking process, using precision manufactured parts, keeps the tip rod assembly from working loose and causing mechanical and electrical problems later. Step 2: Cable center conductor is soldered to tip rod; then the tubular bridge sleeve is slid forward, bringing the cable shield in contact with the circular notch around rear of tip rod assembly. Step 3: Bridge sleeve is crimped tightly to tip rod assembly and cable. Center conductor is completely isolated from potential pulling strains, and shield makes a firm, low resistance connection with plug sleeve. Step 4: A dimensionally stable plastic handle/body of the proper color, size and shape is molded into place. Features are depressions for finger grip, cable entry opening customized to cable diameter to minimize wear on cable, and handle/body molded in one place. From start to finish, Switchcraft's molded cables are designed and built with maximum quality and reliability. There is virtually no limit to the type and characteristics of special molded cables that Switchcraft can build to special order. For all special orders, consult Switchcraft. FIGURE 1: MOLDED CABLE MANUFACTURING STEPS FOR 1/4" LITTEL PLUG(R) 1. One Pc. Tip Rod Assembly 2. Center Conductor Termination Bridge Sleeve 3. Crimped Bridge Sleeve 4. Complete Body/Handle Molded in Place DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 Cable Entry Opening - Custom Selected to fit Cable Used PATCH CORDS & MOLDED CABLE ASSEMBLIES Molded cable assemblies offer many advantages over conventionally-fabricated cables: * Improved wiring strain relief. * Proper match of cable diameter to handle. * Sealed junction: Less exposed area; less contamination due to moisture, dust, dirt. * Lower weight and smaller size. * 100% shielding on selected types. * Color to match/complement equipment decor. * Legends, color codes, ribs, dot, customer logo/indicia can be added. * All molded cables are 100% tested for continuity, shorts and voltage breakdown (250 or 500V). * All Switchcraft(R) molded assemblies are UL recognized. 240 PATCH CORDS & MOLDED CABLE ASSEMBLIES 3.5MM MOLDED CABLE ASSEMBLIES PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information PATCH CORDS & MOLDED CABLE ASSEMBLIES 3.5MM MOLDED CABLES 35HRXXX35 36HRXXX36 35HRXXX84 SPECIFICATIONS PLUGS FEATURES AND BENEFITS * * * * Choose plug-to-plug or plug-to-stripped and tinned leads 3.5 mm plugs available as straight or right-angle Available in mono and stereo NOM.29 GA jacketed conductors (red and white) with copper spiral shield * Cable O.D. 3.0 mm nom./.118" nom. * Black cable Tip, Ring and Sleeve: Brass with nickel-plate Flex Life: 5000 cycles minimum Plug Insulator: ACETAL PART NUMBERING SYSTEM ORDERING INFORMATION 1. Order by part number. 2. Contact Switchcraft for custom requirements. END CODE: 35 3.5 mm STRAIGHT PLUG 32 33 35 36 - Mono RA Mono Stereo RA Stereo H - Black R - 3.0 mm nom. 2-conductor wire with spiral copper shield END CODE: 36 3.5 mm RIGHT-ANGLE PLUG DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Length (feet) 036 (3) 072 (6) 144 (12) 32 33 35 36 84 - Mono RA Mono Stereo RA Stereo Stripped and tinned 90 - Straight Cut Off END CODE: 84 STRIP and TIN Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery PATCH CORDS & MOLDED CABLE ASSEMBLIES POWER PLUGS AND JACKS FAX: 773 792-2129 241 * Please visit the product pages on our website for the most up-to-date product information ST760, ST765 - Termination Code: 47, 48 SPECIFICATIONS PLUG Ask Abo Our Loc ut k Power P ing lugs Sleeve: Copper alloy, nickel-plated. Pin: Silver-plated copper alloy. Finger Insulator: Plastic. Insulating Washers: Rigid plastic. Sleeve Terminal: Steel, tin-plated. Molded Handle: Plastic. ST-760 .080-.084 DIA x .328 DEEP (2.03-2.13) DIA x (8.33) DEEP ST-765 .099-.103 DIA x .328 DEEP (2.52-2.61) DIA x (8.33) DEEP JACK NOTE: ST760 is a molded version of S760; ST765 is a molded version of 765. Bushing: Brass, nickel-plated copper alloy. Washers: Rigid plastic. Pin, Springs, and Terminals: Plated copper alloy. Housings: Thermoplastic. CABLE RA760, RA765 - Termination Code: 52, 53 We will build assemblies on cable furnished by you, .156" (3.96 mm) outside diameter, or on cable we purchase to your specifications. Jacket must have temperature rating of 60 C minimum. Optional mold available for larger cable; order as ST760L or ST765L. DESIGN FEATURES RA-760 .080-.084 DIA x .328 DEEP .(2.03-2.13) DIA x (8.33) DEEP RA-765 .099-.103 DIA x .328 DEEP .(2.52-2.61) DIA x (8.33) DEEP RA712A and RA722A Termination Code: 71, 72 *RA712A .108" -.112" Split Pin Collapses to fit .10" Diameter Pin RA722A .086" -.090" Split Pin Collapses to fit .08" Diameter Pin * ST760, ST760L, RA760 - accepts .08" (2.03 mm) diameter pin. * ST765, ST765L, RA765 - accepts .099" (2.54 mm) diameter pin. * RA712A: * Mates with ST765, ST765L, and RA765. * 2 conductor. * Mounts in .313" diameter hole in panels up to .125" thick. * Pin outside diameter is .108" - .112" split pin. * Automatic switchover from AC to DC. * RA722A: * Mates with ST760, ST760L, and RA760. * Pin outside diameter is .086" - .090" split pin. * Molded-in cable clamp sleeve terminal (RA plugs only). * For use with sockets similar to those used on portable radios, tape recorders, television receivers and appliances which feature AC adapters and/or battery chargers. * Available with terminations of another ST760, RA760 stripped and tinned ends, spade lugs, alligator clips, and more on special order. * Jacks available with extended bushing for use with Switchcraft locking power plugs 761K, 766K, S761K, and S766K on special order. See ordering guide on next page. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 PATCH CORDS & MOLDED CABLE ASSEMBLIES MOLDED CABLE ASSEMBLIES With Power-Plug Battery Charger Plugs and Jacks 242 PATCH CORDS & MOLDED CABLE ASSEMBLIES ORDERING GUIDE PHONE: 773 792-2700 PATCH CORDS & MOLDED CABLE ASSEMBLIES * Please visit the product pages on our website for the most up-to-date product information MOLDED CABLE ASSEMBLIES WITH POWER PLUGS AND JACKS PART NUMBERING SYSTEM TO CREATE A PART NUMBER 1. Identify Terminations (both ends) 2. Indicate Color and Type of Cable 3. Select the Length of Assembly DC POWER CABLE ASSEMBLIES Type Termination ST760 ST765 ST760L ST765L ST760K ST765K RA760 RA765 RA712A RA722A 4 4 5 5 7 7 5 5 7 7 7 8 7 8 3 4 2 3 1 2 Color Cable* Length (feet) Termination G-Gray H-Black C K 0 0 1 2 8 (1.5) 4 (2) Y Z 0 0 0 1 3 4 7 2 6 8 2 0 4 4 5 5 7 7 5 5 7 7 8 9 (3) (4) (6) (10) 7 8 7 8 3 4 2 3 1 2 4 0 *See "Cable Types" chart on page 260. Note: Some configurations will be special orders. Contact Switchcraft. TYPICAL STANDARD PART NUMBERS STRAIGHT 2-CONDUCTOR .100 PIN POWER PLUG (#48) TO: Cable Length (feet) Part Number1 (power plug) #48 C 6 48HC07248 (stripped wires) #84 C 6 48HC07284 (blunt cut) #90 C 6 48HC07290 (power jack .100 pin) #71 K 6 48HK07271 Termination (other end) 1. All cables listed here are black. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery PATCH CORDS & MOLDED CABLE ASSEMBLIES EN3TM MOLDED CABLE ASSEMBLIES FAX: 773 792-2129 243 * Please visit the product pages on our website for the most up-to-date product information EN3TM MINI WEATHERTIGHT OVERMOLDED CABLE ASSEMBLIES * Dual purpose handle provides flex relief and finger grip design for easy insertion and withdrawal. * Available in both cord and in-line versions. * 2 through 8 pin configurations. * Superior leakage protection. Contact area is double-sealed for excellent moisture and chemical resistance. * Integral O-ring and gasket. O-ring is molded onto cord housing assembly and gasket is molded onto panel housing assembly to prevent leakage and eliminate need for additional copper case o-rings and gaskets. * Thermoplastic rubber body simulates closed entry contact system to prevent probe damage or accidental loss of spring retention due to misaligned or bent pins. * Housing rated UL 94V-O against flammability. * Exceeds Coast Guard specifications for water tightness (CFR 46 Part 110.20). * Exceeds enclosure rating IP16/IP18 when not mated or covered and IP66/IP68 when mated or covered (IEC 529). * Exceeds enclosure rating 6P at 1000V when mated or covered (NEMA 250). SPECIFICATIONS MECHANICAL Shock: Mil-Std 202 Method 213B, condition K Vibration: Mil-Std 202 Method 201 Life: 600 insertion/withdrawal cycles (minimum) ELECTRICAL Voltage Rating (sea level): Tested at 600 VRMS Insulation Resistance: 100 megohms (minimum) at 77 F Contact Resistance: 5 milliohms (maximum) Current Rating: 7.5 Amps (#20 contact); 13.0 Amps (#16 contact) ENVIRONMENTAL Temperature Limits: -40C to +65C (non-operating) Moisture Resistance: Mil-Std 202 Method 106F Insulation Resistance: Mil-Std 202 Method 302 condition B Thermal Shock: Mil-Std 202 Method 107G Salt Spray: Mil-Std 202 Method 101D condition B RATINGS IP16/IP18 IP66/IP68 NEMA 250 (6P) CFR 46 Part 110.20 UL 94V-O Patent 5,485,673 File 36049 APPLICATIONS * Process Control * Communications * Marine Electronics * Transportation * Medical Instrumentation * General Industrial Electronics * Geothermal Instrumentation OVERMOLDED STYLE NUMBER #20 CONTACT SIZE MATERIALS Connector shells, contact locking disk: Thermoplastic polymer glass fiber, flame retardant Coupling ring: Nylon Connector shell interior: Thermoplastic rubber Contacts: Copper base alloy gold-plated over nickel underplate Color H Cable A Length in Inches 072 2 502 512 522 532 3 503 513 523 533 4 504 514 524 534 5 505 515 525 535 6 506 516 526 536 7 -- 517 527 -- 8 -- 518 528 -- 7 -- -- -- -- 8 -- -- -- -- OVERMOLDED STYLE NUMBER #16 CONTACT SIZE PART NUMBERING GUIDE* Example: 1st Termination 503 Number of Pins Male Cord Female Cord Male Inline Female Inline 2nd Termination 184 *In most instances the multi-conductor cable will be used - found on page 252. The overmolded EN3TM cable can accept nominal cable O.D.'s up to .300. Tooling charges may apply for customer specified cable. Number of Pins Male Cord Female Cord Male Inline Female Inline 2 552 562 572 582 3 553 563 573 583 4 -- -- -- -- 5 -- -- -- -- 6 -- -- -- -- Note: 9-18 versions can also be molded. Contact factory for details. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 PATCH CORDS & MOLDED CABLE ASSEMBLIES FEATURES AND BENEFITS 244 PATCH CORDS & MOLDED CABLE ASSEMBLIES MOLDED CABLE ASSEMBLIES PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information PATCH CORDS & MOLDED CABLE ASSEMBLIES CORDETTE(R) AND CORD SWITCH ASSEMBLIES 97WVXXX06 (shown with optional clip) 99GVXXX04 97GVXXX06 Also available with 3.5 mm plug finger termination. 99GD07261 97WDXXX61 99WD07284 FEATURES AND BENEFITS SPECIFICATIONS STYLE 97 * Momentary, 0.5 A switching combined with 1-piece molded plastic body qualifies Cordette for all types of commercial and industrial usage. * Available with molded-on Cordette switch or assembled Cord switch (ED series). * Cable features PVC outer jacket and withstands rugged use. Body: Series ED900 Housing: Die-cast zinc, satin nickel-plated. Switch Body and Insert Bushing: H.H. Brass, nickel-plated. Insulation: XXXP paper-base phenolic. Cable Relief Bushing: Black neoprene. Pressure Plates: Stainless steel. Cable Relief Screws: Steel, nickel-plated. SERIES ED900 TERMINATION CODE: 51 TERMINATION CODE: 06 , 07 (06 - 2 conductor not shown) TERMINATION CODE: 50 TERMINATION CODE: 61 DESCRIPTION Example: Std. Cordette (921K) ED903 Series Standard Cable Type for 1/4" Plugs Standard Cable Types for Tini(R) and Micro Plugs 1st Term Code 99 97 Housing & Cable Color G CABLE CODE V X 0 Cable Length (In.) X X 7 7 G-Gray H-Black B-Beige W-White G-Gray H-Black W-White H-Black V (W1230-1) V (W1230-2) V (W1230-4) V (W1230-5) D (W1032-1) D (W1032-2) D (W1032-3) E (W1065-2) .250" .250" .250" .250" .109" .109" .109" .100" PVC PVC PVC PVC PVC PVC PVC PVC 18GA 18GA 18GA 18GA 25GA 25GA 25GA 26GA DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com 2nd Term Code 84 06 07 TERMINATION CODE: 84 Circuitry Button Color Std. - 1A (No Code) 1 - 1B 2 - 1C 3 - AB Std. Black (No Code) H - Black R - Red W - White 61 50 51 Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery PATCH CORDS & MOLDED CABLE ASSEMBLIES CORDETTE(R) SWITCHES FAX: 773 792-2129 245 * Please visit the product pages on our website for the most up-to-date product information A Our sk Abo Cord New Se ut ette (R) ale Cod ST90 d e: 9 8 1 ST900 Termination Code: 99 SPECIFICATIONS SWITCH ST900 Housing: White plastic (standard). Molded Body: Gray plastic (standard) with contrasting trim and gray pushbutton. Contacts: Integral, copper alloy, hard gold-plated form 1-A, 0.5 A, 50 W maximum, AC, non-inductive load. Not recommended for high voltage circuits. Insulation: Thermoplastic UL 94V-0. Button Color: Black (standard). Other colors available on special order. CABLE ST900F Standard Unshielded--Type W-1230. Note: See Standard Cable Chart on page 260 for details. We will build assemblies on cable furnished by you, .27" (6.68 mm) outside diameter, or on cable we purchase to your specifications. Jacket must have temperature of 60 C minimum. ST900 (#99) Button stroke only .063" (1.6 mm). Cable leads soldered directly to switch terminals. Standard button is with 1-A switching. Use termination number "99" with all cable numbering charts except multi-pin interconnection. Use code "198" for multi-pin interconnections. See Switch Section of Switchcraft's Engineering Design Guide for more details on the ST900. Part Number Description 921 Cordette Switch, phone jack termination 921K Same as 921, plus 6-foot, 2 conductor cable with stripped and tinned leads. SPECIAL ORDER FEATURES * * * * * 1-B, 1-C, or 1-A + 1-B switching. Red, green, blue, white or yellow pushbuttons. Legends Other body colors ST-900 - Custom-molded to any of a large selection of cables. Also many cable terminations, i.e., phone plugs, extension jacks, phono plugs, spade lugs, alligator clips, stripped and tinned leads, etc. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 PATCH CORDS & MOLDED CABLE ASSEMBLIES MOLDED CABLE ASSEMBLIES WITH CORDETTE(R) SWITCHES 246 PATCH CORDS & MOLDED CABLE ASSEMBLIES MULTIPIN INTERCONNECTORS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information PATCH CORDS & MOLDED CABLE ASSEMBLIES MOLDED CABLE ASSEMBLIES WITH DIN PLUGS STYLES RA300 AND ST300 APPLICATIONS * * * * * * Style ST307 Termination Code: 307 Computer Data Communications Instrumentation Medical Systems Process Controls MIDI (Musical Instrument Digital Interface) FEATURES * Long life * 7 different pin configurations: versatile circuitry * Fully molded plugs sealed against contamination (moisture, dust, dirt) * Fully shielded: plugs with interference protection/ common ground-shield * Strain relief: protects internal wire connections * Flex relief: molded integral with handle for extra protection. No exit stress failures * Locking: 30 twist locking for anti-vibration protection and ease of engagement * Straight and coil cords: stock and custom styles, colors, lengths * Shielded or unshielded cables: stock and custom styles, colors, lengths * Molded through-panel cable relief: extra cable protection * Custom wiring/ keying: gives extra choice in mounting and circuit selection * Custom contact plating: precious and other metals * Custom logo: your identification on molded plugs * 100% tested for continuity, shorts, appearance, voltage breakdown (250 or 500 V) Style ST324 Termination Code: 324 Style RA374 Termination Code: 374 Style RA356 Termination Code: 356 COMPLETE SHIELDING SYSTEMS Switchcraft also offers shielded DIN receptacles for use with shielded molded cable assemblies. Together they provide a valuable design tool to suppress EMI interference to permit you to meet strict requirements of FCC Docket 20780. ORDERING 1. Order by part number from guide on page 251. 2. For special order items, contact Switchcraft with details. SPECIFYING NOTE: See Connector Section of Switchcraft's Engineering Design Guide for mating receptacles. Switchcraft DIN molded cable assemblies meet increased demand for modern, field-tested connections for a wide range of electrical/electronic applications. Connectors are DIN (Deutsche Industrie Norm) circular type, male or female (locking or non-locking) with 3 to 8 pins/contacts. Units are molded and protected with a rugged handle, and are fully shielded and equipped with advance design cable relief. Switchcraft cable assemblies and mating receptacles adhere to strict requirements of FCC Docket 20780 and offer fully shielded links for data and instrumentation applications of all kinds. SHIELDING EFFECTIVENESS Effectiveness of shielding is frequency-dependent; as frequency increases, more shielding is required to maintain comparable shielding effectiveness. The chart below delineates shielding effectiveness with molded cable assemblies with 100% foil shield cables and shielded DIN connectors. Frequency Range MHz 30-500 60-400 500-800 DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Shielding Effectiveness, dB -30 -20 -10 Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery PATCH CORDS & MOLDED CABLE ASSEMBLIES MULTIPIN INTERCONNECTIONS FAX: 773 792-2129 247 * Please visit the product pages on our website for the most up-to-date product information MOLDED CABLE ASSEMBLIES WITH DIN PLUGS (continued) Part Number 305KD084184 Contact Resistance: Cord Plugs and Receptacles. .010 ohms, contact spring/pin; .030 ohms, ground clip/shell. Control and Switching Receptacles: .015 ohms, contact spring/pin; .020 ohms, switch contacts. Dielectric Withstanding Voltage: 500 V (rms). Leakage Resistance: 105 M 305HJ084184 MECHANICAL Life: 5000 cycles 306HK042306 Insertion/Withdrawal Forces: Number of Insertion Force Contacts pound/N 2 3 4 5 6 7 8 3.6/(16) 5.4/(24) 7.2/(32) 9.0/(40) 10.8/(48) 12.6/(56) 14.4/(64) Withdrawal Force pound/N .45-2.7/ (2-12) .67-4.1/ (3-18) .90-5.4/ (4-24) 1.24-6.8/ (5.5-30) 1.46-8.1/ (6.5-36) 1.68-9.5/ (7.5-42) 1.90-10.8/ (8.5-48) 306HK084306 Description Black coil cord. 15" (381 mm) retracted; 78.74" (2 m) extended. 5 pin male with other end stripped and tinned on cable number W-1301-2. Black cable cord. 7 feet (2.13 m) in length. 5 pin male with other end stripped and tinned on cable number W-1279-2. Black cable cord. 39.37" (1 m) in length. 6 pin male to 6 pin male on cable number W-1289-2. Black cable cord. 78.74" (2 m) in length. 6 pin male to 6 pin male on cable number W-1289-2. Term. A ST305 Term. B -- ST305 -- ST306 ST306 ST306 ST306 Special order only; contact Switchcraft. FOIL SHIELD CABLES - STRAIGHT Part Number W-1279-2 W-1289-2 Color Black Black Length, inch (mm) Length must be specified. PLUG MATERIALS Pin Contacts: Silver-plated, copper alloy. Insulating Washer: Thermoplastic. Locking Plug Housing: Nickel-plated, die-cast zinc alloy. Other Housings: Plated steel. Molded Handle: Flexible thermoplastic. Strain relief matte finish. NOTE: All connectors meet DIN specifications. Din specification numbers (except for 4-pin, 5-pin 240) will be furnished on request. ORDERING 1. See table below for termination descriptions. Termination code is the same number as the plug style (e.g. termination code for a ST305 is 305). 2. See page 251 for ordering guide. Part Numbers-Male (pins) Pin Arrangements Description Straight handle. Straight handle. 30 twist lock ring fastening, mates with lock flange plugs and receptacles. Right-angle handle. Right-angle handle. 30 twist lock ring fastening, mates with lock flange plugs and receptacles. 3@180 B 4@210 D 5@180 F 5@240 E 6@240 G 7@270 H 8@270 N ST303 ST309 ST305 ST304 ST306 ST307 ST308 ST323 ST329 ST325 ST324 ST326 ST327 ST328 RA353 RA359 RA355 RA354 RA356 RA357 RA358 RA373 RA379 RA375 RA374 RA376 RA377 RA378 1. See next page for Pin/Contact arrangements. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 PATCH CORDS & MOLDED CABLE ASSEMBLIES PART NUMBERS - MOLDED CABLE ASSEMBLIES STYLES RA300 AND ST300 SPECIFICATIONS ELECTRICAL 248 PATCH CORDS & MOLDED CABLE ASSEMBLIES MULTIPIN INTERCONNECTIONS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information PATCH CORDS & MOLDED CABLE ASSEMBLIES MOLDED CABLE ASSEMBLIES WITH DIN PLUGS (continued) STYLES RA300 AND ST300 ST300 CUTAWAY VIEW OF STYLE ST303 DOUBLE-FLATTED HOLE PANEL UP TO .125" (3.18 mm) THICK 100% THROUGHCONNECTOR SHIELDING SHIELDED CABLE 2-PIECE PANEL RETAINS CABLE RELIEF CABLE RELIEF EXTERNAL CABLE RELIEF CRIMP STRAIN RELIEF RUGGED COMPLETELY MOLDED HANDLE Pin/Contact Arrangements STYLES ST303 TO ST309 STYLES ST323 TO ST329 STYLES RA353 TO RA359 STYLES RA373 TO RA379 DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery PATCH CORDS & MOLDED CABLE ASSEMBLIES MIDI MOLDED CABLE ASSEMBLIES FAX: 773 792-2129 249 * Please visit the product pages on our website for the most up-to-date product information MIDI CABLES PATCH CORDS & MOLDED CABLE ASSEMBLIES Standard black cable and handle Optional red cable and handle FEATURES AND BENEFITS MIDI CABLES * Molded connectors provide superior pull-out retention and greater environmental protection than assembled versions. * All five pins wired active with high definition Belden Brilliance(R) cable. * Can be used with any type MIDI instrument. Part number MD3 MD6 MD10 MD15 Length 3 foot 6 foot 10 foot 15 foot SPECIFICATIONS STANDARD PRODUCT * Belden Brilliance(R) 24 awg, 4 conductor, braid shielded cable. * Wiring conforms to MIDI specifications including the clock/sync capabilities on pins 1 and 3. * Molded 180 degree 5 pin DIN connectors. * Standard color is black with other colors available on special order. * PVC molded handles and cable jackets. * All molded cables are 100% tested for continuity, shorts and voltage breakdown. * Silver-plated pins * Belden Brilliance(R) 24 awg, 4 conductor, braid shielded cable * Black cable * Black handle ORDERING INFORMATION SPECIAL ORDER * * * * * Gold-plated pins Other cable types Optional lengths Color cable Color handle 1. Order by part number. 2. Contact Switchcraft for more information. Belden Brilliance(R) is a registered trademark of Belden Wire and Cable Company. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 Color Black Black Black Black 250 PATCH CORDS & MOLDED CABLE ASSEMBLIES MULTIPIN INTERCONNECTORS PHONE: 773 792-2700 PATCH CORDS & MOLDED CABLE ASSEMBLIES * Please visit the product pages on our website for the most up-to-date product information MOLDED CABLE ASSEMBLIES WITH MINIATURE, SHIELDED, MOLDED TINI Q-G(R) PLUGS STYLE ST600 Tini Q-G(R) miniature plugs offer 3- through 6-pin/contact connecting with full shielding, small size, RFI-protected termination of analog/digital circuits/equipment. Typical applications are for EIA RS-232C and RS-449 type connections. Plugs retain all Tini Q-G(R) features, including latchlock, strain relief, flex relief, polarization and "scoop-proof" construction. See Connector Section for details on features and specifications. Shielding of these plugs meets U.S. Navy Tempest requirements with proper cable and mating connector choice. MOLDED CABLES WITH STRAIGHT FEMALE Tini Q-G(R) PLUGS (Special Order Only) Three- through 6-contact plugs are molded into a complete cable assembly per customer requirements. Plug includes latch for secure connection, "through-ground" provision, and external cable flex relief. Plugs are molded onto shielded or unshielded cables of .180" - .215" diameter Standard cable color is gray; black, beige and other colors can also be specified. In addition, UL 94V-0 rated cables can be specified. Cable Length Contact Arrangements (Contact View) Styles ST603, ST604, ST605, ST626 Termination Codes: 603, 604, 605, 626 Note: Reverse gender molded male cable assembly available. Call factory for details. Plug Style 2 ST603 ST604 ST605 ST626 Description 3-contact straight female plug (molded) 4-contact straight female plug (molded) 5-contact straight female plug (molded) 6-contact straight female plug (molded) Mating Receptacles 1 TA3M, TB3M TA4M, TB4M TA5M, TB5M TA6ML, TB6M 1. See Connector Section of Switchcraft's Engineering Design Guide for other mating receptacles. 2. Termination code is the same as the numbers in the plug style (e.g. termination code for a ST626 is 626). See multi-pin ordering guide on next page. IMPORTANT SPECIFYING NOTE Special 3, 4 and 5 pin/contact patterns can be tooled on special order where production quantities warrant special handling. Contact Switchcraft with your requirements. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery PATCH CORDS & MOLDED CABLE ASSEMBLIES ORDERING GUIDE FAX: 773 792-2129 251 * Please visit the product pages on our website for the most up-to-date product information 1. Identify Terminations (both ends)* STANDARD MULTI-PIN CABLE ASSEMBLY TERMINATION VS. CABLE CROSS-REFERENCE 2. Indicate Color and Type of Cable 3. Select the Length of Assembly Cable W W W W W W W W W W W W W 1 1 1 1 1 1 1 1 1 1 1 1 1 2 0 0 2 2 2 2 2 2 2 2 2 4 0 8 7 0 7 3 9 8 7 8 9 8 4 3 9 7 6 7 7 1 8 9 9 0 4 2 2 1 1 # 6 2 6 2 # # # 2 1 MULTI-PIN CABLE ASSEMBLIES Termination Color Cable1 303 304 305 306 307 308 309 603 604 605 606 G-Gray H-Black D-Beige A B C D E F --G H J K M --Q --U Length (feet) 036 060 072 120 (3) (5) (6) (10) Termination (examples) 3 3 3 3 3 3 3 6 6 6 6 1 1 0 0 0 0 0 0 0 0 0 0 2 8 9 3 4 5 6 7 8 9 3 4 5 6 4 0 1. See next page for cable descriptions. * Please refer to page 243 for EN3TM weathertight connector options. Note: * Other cables available on special order. Contact Switchcraft. TYPICAL PART NUMBERS STRAIGHT 3-pin DIN PLUG (#303) TO: Termination (other end) (3-pin DIN) #303 Cable Length (feet) Part Number2 A 5 303HA060303 3 (3-pin Tini Q-G ) #603 A 5 303HA060603 (Strip and tin) #184 A 6 303HA072184 (R) (Blunt cut) #190 2. All cables listed here are black. 3. .180" diameter. A 6 303HA072190 T E R M I N A T I O N RA353 RA354 RA355 RA356 RA357 RA358 RA359 RA373 RA374 RA375 RA376 RA377 RA378 RA379 ST303 ST304 ST305 ST306 ST307 ST308 ST309 ST323 ST324 ST325 ST326 ST327 ST328 ST329 ST603 ST604 ST605 ST626 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X # - Indicates any number X - Indicates that the cable in this column and the termination in this row can be used together in a standard part number 1. - Other termination/cable combinations may be available or special order. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 X PATCH CORDS & MOLDED CABLE ASSEMBLIES MOLDED CABLE ASSEMBLIES FOR MULTI-PIN INTERCONNECTION PART NUMBERING SYSTEM (NOT ALL NUMBERS SHOWN) 252 PATCH CORDS & MOLDED CABLE ASSEMBLIES CABLE GUIDE PHONE: 773 792-2700 PATCH CORDS & MOLDED CABLE ASSEMBLIES * Please visit the product pages on our website for the most up-to-date product information STANDARD MULTI-PIN INTERCONNECTION CABLES FOR MOLDED CABLE ASSEMBLIES ON PAGES 243 THROUGH 251. Cable Type Color W1203-2 Black W1089-1 Gray W1077-1 Gray W1206-1 W1206-2 Gray Black W1277-6 Beige W1237-2 Black W1291-6 Beige W1288-2 Black W1279-1 W1279-2 W1279-6 W1289-2 W1289-6 W1290-1 W1290-6 Gray Black Beige Black Beige Gray Beige W1284-2 Black Description 3 conductor, 22 AWG stranded, unshielded .18" (4.6 mm) outside diameter, UL style 2960 4 conductor, 22 AWG stranded, unshielded .18" (4.6 mm) outside diameter, UL style 2960 5 conductor, 22 AWG stranded, unshielded .20" (5.1 mm) outside diameter, UL style 2464 6 conductor, 22 AWG stranded, unshielded .20" (5.1 mm) outside diameter, UL style 2095 7 conductor, 22 AWG stranded, unshielded .20" (5.1 mm) outside diameter, UL style 2095 8 conductor, 22 AWG stranded, unshielded .23" (5.8 mm) outside diameter, UL style 2464 3 conductor, 24 AWG stranded, foil shielded .18" (4.6 mm) outside diameter 4 conductor, 24 AWG stranded, foil shielded .18" (4.7 mm) outside diameter 5 conductor, 24 AWG stranded, foil shielded .19" (4.8 mm) outside diameter 6 conductor, 24 AWG stranded, foil shielded .22" (5.5 mm) outside diameter 8 conductor, 24 AWG stranded, foil shielded .23" (5.7 mm) outside diameter 5 conductor, 22 AWG stranded, braid shielded .23" (5.8 mm) outside diameter DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Cable Code A B C D E F G H J K M Q Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery PATCH CORDS & MOLDED CABLE ASSEMBLIES SUBMINIATURE PLUGS AND JACKS FAX: 773 792-2129 253 * Please visit the product pages on our website for the most up-to-date product information DESIGN FEATURES * Thermoplastic insulation between tip and sleeve circuits. * "Pear-shaped" one-piece tip rod. * Cable clamp connects cable shield (or second conductor) to plug sleeve. SPECIFICATIONS PLUG RA850 Termination Code: 61 Tip and Sleeve: Plated copper alloy. Insulation: W-1032-1. Molded thermoplastic. Sleeve Terminal: Tinned copper alloy. Molded Handle: Plastic. Standard Colors: Gray, white, black, brown. Other colors available on special order. CABLE Standard Shielded Cable--Type W-1032-1. NOTE: See Standard Cable Chart on page 260 for details. Order by part number from guide on page 259. Special Cable: We will build assemblies on cable furnished by you, .109" (2.77 mm) diameter maximum, or on cable we purchase to your specifications. Jacket must have temperature rating of 60 C minimum. RA850: Right-angle Micro-Plug(R) plug with plastic handle. Short body extension. Molded to cables up to .109" (2.77 mm) outside diameter. ST850: Straight Micro-Plug(R) plug, small plastic handle, only .47" (11.9 mm) long. NOTE: Micro-Plug(R) molded cable assemblies mate with Switchcraft Micro-Jax(R) TR-2A. ST850 Termination Code: 60 DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 PATCH CORDS & MOLDED CABLE ASSEMBLIES MOLDED CABLE ASSEMBLIES With Micro Plug(R) Subminiature Phone Plugs 254 PATCH CORDS & MOLDED CABLE ASSEMBLIES MINIATURE PLUGS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information PATCH CORDS & MOLDED CABLE ASSEMBLIES MOLDED CABLE ASSEMBLIES With Tini Plug(R) Miniature Phone Plugs RA700 RA710 Termination Code: 50 Termination Code: 51 ST740 ST700 Termination Code: 46 Termination Code: 41 ST750 ST710 Termination Code: 45 Termination Code: 40 DESIGN FEATURES * "Pear-shaped" one-piece tip rod soldered directly to cable conductor. SPECIFICATIONS PLUG Tip and Sleeve: Nickel-plated copper alloy. Cable Clamp: Tin-plated steel. Insulation: Rigid plastic. Molded Handle: Plastic. Standard Colors: Gray, white, black, brown. Other colors available on special order. * Cable clamp connects cable shield (or second conductor) to the plug sleeve. CABLE RA700: Right-angle Tini Plug(R) plug with small plastic handle. Short body extension, recommended for slightly recessed jacks. Molded to cables up to .109" (2.77 mm) outside diameter. Shielded--Type W-1000-1 (suitable for ST740 and ST750 due to cable Outside Diameter). Shielded--Type W-1032-1 (suitable for all types on this page). Standard Parallel--Type W-1041-1. RA710: Right-angle Tini-Plug(R) plug similar to RA700, except longer body extension where equipment jack is deeply recessed. Molded to cables up to .109" (2.77 mm) outside diameter. NOTE: See Standard Cable Chart on page 260 for details. Order by part number from guide on page 259. ST700: Straight Tini-Plug(R) plug offering the shortest and smallest handle. Special Cable: We will build assemblies on cable furnished by you, up to .160" (4.06 mm) (for ST740 and ST750); .120" (3.05 mm) (for ST700, ST710, RA700, RA710) outside diameter, or on cable we purchase to your specifications. Jacket must have temperature rating of 60C minimum. ST710: Same as ST700, except with longer handle. ST740: Straight Tini-Plug(R) with larger outside diameter handle desirable. ST750: Straight Tini-Plug(R) with same diameter handle as ST740 and longer handle for easier handling. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery PATCH CORDS & MOLDED CABLE ASSEMBLIES PHONO PLUGS AND JACKS FAX: 773 792-2129 255 * Please visit the product pages on our website for the most up-to-date product information MOLDED CABLE ASSEMBLIES With Phono Plugs and Phono Extension Jacks Termination Code: 26 ST-60 Termination Code: 82 RA-40 (short handle) Termination Code: 29 ST-35 Termination Code: 25 RA-41 (long handle) Termination Code: 31 SPECIFICATIONS PLUG Tip (prong): Nickel-plated, copper alloy. Sleeve Connection: Plated copper alloy. Insulation: Rigid plastic or thermoplastic. Molded Handle: Thermoplastic. Standard Colors: Gray, black, brown, red, white, tan, or blue. Other colors available on special order. EXTENSION JAX Tip Spring: Nickel-plated, hardened copper alloy. Sleeve Connection: Plated steel. Insulation: Rigid plastic. Molded Handle (both Plug and Jack): Plastic. Standard Colors: Gray, white, black and brown. Other colors available on special order. CABLES RA35, ST35, ST40, ST60: Standard Shielded Cable--Type W-1000-1. Standard Parallel Cable (lamp cord)--Type W-1033-1. RA40, RA41: Standard Shielded Cable--Type W-1000-1 and W-1032-1. Standard Unshielded (Parallel) Cable--Type W-1041-1. NOTE: See Standard Cable Chart on page 260 for details. Order by part number from guide on page 259. Special Cable: We will build assemblies on cable furnished by you (maximum diameter varies for types RA35, ST35, ST40) up to .20" (5.08 mm) outside diameter for RA40 and RA41 or on cable we purchase to your specifications. Jacket must have a temperature rating of 60 C minimum. RA35: Right-angle phono plug with body extension for recessed jack. Cable: .188" (4.78 mm) outside diameter maximum. Completely shielded. (Available on special order only.) ST35: Straight phono plug with "finger grip" handle. Handle .438" (11.13 mm) outside diameter. Completely shielded. ST40: Straight phono plug, similar to ST35, except with longer handle. ST60: Straight extension jack with "finger grip" handle. Handle .438" (11.13 mm) outside diameter. Completely shielded. RA40: Compact right-angle phono plug with low profile, high quality insulation, and short .281" (7.14 mm) molded handle for audio and RF connections where space is at a minimum. RA41: Same as RA40, except handle is .531" (13.49 mm) long. DESIGN FEATURES * Can be specified with phenolic, nylon, glass-filled Teflon or polypropylene internal insulators. Polypropylene is recommended for RF connecting applications. * Applications include stereo, PA and intercoms, audio-visual and telecommunications, including RF connections in 2-way radio and paging systems. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 PATCH CORDS & MOLDED CABLE ASSEMBLIES ST-40 RA-35 Termination Code: Special Order 256 PATCH CORDS & MOLDED CABLE ASSEMBLIES EXTENSION JACKS AND LITTEL(R) PLUGS PHONE: 773 792-2700 PATCH CORDS & MOLDED CABLE ASSEMBLIES * Please visit the product pages on our website for the most up-to-date product information MOLDED CABLE ASSEMBLIES WITH TINI-EXTENSION(R) JACKS SPECIFICATIONS Housing (or Sleeve): Nickel-plated, copper alloy. Handle: Molded plastic. Sleeve Terminal: Plated steel. Tip Spring: Copper alloy. Insulation: Rigid plastic. Larger design also has a molded thermoplastic insert. Standard Colors: Gray white, black, brown. Other colors available on special order. ST125 Termination Code: 83 CABLE Special Cable: We will build assemblies on cable furnished by you, up to .160" (4.06 ram) outside diameter--or on cable we purchase to your specifications. Jacket must have temperature rating of 60 C minimum. Standard Shielded: Type W-1032-1. Standard Unshielded: Type W-1041-1. NOTE: See Standard Cable Chart on page 260 for details. Order by part number from guide on page 259. ST125: Straight Tini-Extension Jax jacks with same features as ST121, on next page (shielded, 2-conductor), except with .406" (10.31 mm) outside diameter, designed to mate with Switchcraft Tini-Plug(R) plugs. MOLDED CABLE ASSEMBLIES WITH LITTEL PLUG(R) PHONE PLUGS RA200 Termination Code: 15 SPECIFICATIONS PLUG Tip: Nickel-plated, copper alloy. Sleeve: Plated copper alloy. Insulation: Rigid plastic. Internal Shield: Plated steel. Molded Handle: Plastic. Standard Colors: Gray, white, black and brown. Other colors available on special order. CABLE FOR 2-CONDUCTOR PLUGS: RA205 Termination Code: 13 Standard Shielded Cable-Type W-1000-1. Standard Parallel Cable (lamp cord)-Type W-1033-1. FOR 3-CONDUCTOR PLUGS: Standard Shielded Cable-Type W-1021-1. NOTE: See Standard Cable Chart on page 260 for details. Order by part number from guide on page 259. Special Cable: We will build assemblies on cable furnished by you, .188" (4.78 mm) diameter maximum, or on cable we purchase to your specifications. Jacket must have a temperature rating of 60C minimum. DESIGN FEATURES * Molded cables with Littel-Plug phone plugs feature one-piece tip rod assembly connecting tip directly to the soldered connection of the cable conductor. * Unusual dual-purpose clamp terminal provides completely shielded electrical connection and a cable clamp; connects plug sleeve to cable shield or conductor. * Right-angle phone plugs (RA202, RA203, RA207 and RA208) molded to cables up to .188" (4.78 mm) outside diameter. RA202, RA203, RA207 and RA208 molded to cables with maximum outside diameter up to .260" (6.6 mm). RA200: Right-angle phone plug with plastic handle. Body extension suitable for recessed jack. Completely shielded. RA205: Right-angle phone plug, similar to RA200, except short body extension and handle for flush mounted jacks. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery PATCH CORDS & MOLDED CABLE ASSEMBLIES EXTENSION JACKS AND LITTEL(R) PLUGS FAX: 773 792-2129 257 * Please visit the product pages on our website for the most up-to-date product information RA207 Termination Code: 06 RA208 Termination Code: 07 ST200 Termination Code: 05 ST230 Termination Code: 10 RA202: Right-angle phone plug with plastic handle. Body extension suitable where jack is recessed. RA203 is similar to RA202, except 3-conductor plug. RA207, RA208: Right-angle phone plug, similar to RA202, except short body extension. Recommended use with panel mounted jacks. RA208 is similar to RA207, except 3-conductor plug. RA217: Special right-angle phone plug, identical to RA200 (previous page); also featuring a unique hook for hanging various types of equipment (such as pillow speakers). Completely shielded. Available on special order only. RA202 Termination Code: 14 ST200: Straight phone plug with "finger grip" handle, but short enough to fit in all equipment. ST230: Straight 3-conductor phone plug; same features as ST200. Completely shielded. MOLDED CABLE ASSEMBLIES WITH EXTENSION JAX(R) PHONE JACKS ST121, ST131 SPECIFICATIONS Termination Code: 80, 81 Housing (or Sleeve): Nickel-plated, copper alloy. Handle: Molded plastic. Sleeve Terminal: Plated steel. Tip and Ring Springs: Copper alloy. Insulation: Rigid plastic. Larger design also has a molded thermoplastic insert. Standard Colors: Gray, white, black, brown. Other colors available on special order. CABLE ST121: Straight Extension Jax(R) jack is a shielded 2-conductor jack with .50" (12.7 mm) outside diameter. Cable clamp connects shield or second conductor to cable. Mates with .25" (6.35 mm) diameter Switchcraft 2-conductor plugs. ST131: Straight Extension Jax jack, same as ST121, except 3-conductor. Mates with .25" (6.35 mm) diameter Switchcraft 3-conductor plugs. Standard Shielded-Type W-1000-1 (for ST121). Type W-1021-1 (for ST131). Standard Unshielded-Type W-1033-1 (for ST121). NOTE: See Standard Cable Chart on page 260 for details. Order by part number from guide on page 259. Special Cables: We will build assemblies on cable furnished by you, up to .260" (6.6 mm) outside diameter, or on cables we purchase to your specifications. Jacket must have temperature rating of 60 C minimum. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 PATCH CORDS & MOLDED CABLE ASSEMBLIES MOLDED CABLE ASSEMBLIES WITH LITTEL PLUG(R) PHONE PLUGS (continued) 258 PATCH CORDS & MOLDED CABLE ASSEMBLIES CABLE CLAMP BANDS AND Y JUNCTIONS PHONE: 773 792-2700 PATCH CORDS & MOLDED CABLE ASSEMBLIES * Please visit the product pages on our website for the most up-to-date product information MOLDED CABLE ASSEMBLIES WITH CABLE CLAMP BANDS SPECIFICATIONS MOLDED BAND Housing: Plastic. Inserts can be added to our molds to include customer's name or trademark. Call for details. Standard Colors: Gray, white, black, brown. Other colors available on special order. CABLE* Standard Parallel Cable (lamp cord) -Type W-1033-1. Standard Shield Cable -Type W-1072. ST91 Termination Code: 94 ST-91 DESIGN FEATURES * For use on stereo connecting cables and on monaural and stereo headset cables. * Prevents further separation of individual leads on "Rip" type cordage. * Can be used as "Y" junction when used with standard shielded cable such as Switchcraft W-1072; or as a cable clamp for general purpose with Switchcraft W-1033 and W-1050. * Special assemblies can be built to OEM needs, using various terminal lugs, special receptacles to phone plugs or connectors. *NOTE: See Standard Cable Chart on page 260 for details. Special Cable: We will build assemblies on cable furnished by you (maximum diameter varies for types) or on cables we purchase to your specifications. Jacket must have temperature rating of 60C minimum. MOLDED CABLE ASSEMBLIES WITH "Y" JUNCTIONS SPECIFICATIONS Y JUNCTION Housing: Molded Plastic. Inserts can be added to our molds to include customer's name or trademark. Standard Colors: Gray, white, black, brown. Other colors available on special order. ST90 Termination Code: 93 CABLE* Standard Shielded Cable -Type W-1000-1. Standard Shielded Cable -Type W-1021-1. ST-90 DESIGN FEATURES * For use on binaural and stereophonic headphones. * Accommodates 1- and 2-conductor shielded cables. * Durable, strain and humidity resistant. Larger "Molded Y" available. Ask for ST94. * Special assemblies can be built to OEM needs, using terminal lugs, special receptacles to phone plugs or connectors. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery PATCH CORDS & MOLDED CABLE ASSEMBLIES ORDERING GUIDE FAX: 773 792-2129 259 * Please visit the product pages on our website for the most up-to-date product information TO CREATE A PART NUMBER 1. Identify Terminations (both ends) 2. Indicate Color and Type of Cable 3. Select the Length of Assembly MOLDED CABLE ASSEMBLIES (Not all numbers shown) Termination 0 1 2 4 8 8 8 9 5 5 5 0 0 2 3 9 Color Cable* G-Gray H-Black D-Beige W-White A B C D E F K V W X Y Z Length (feet) 0 0 0 0 0 1 1 2 3 4 7 2 8 4 6 8 2 0 Termination (1.5) (2) (3) (4) (6) (10) 0 1 2 4 8 8 8 8 5 5 5 0 0 2 3 4 * See "Cable Types" chart on page 260. Notes: * Use any 2-number codes on previous pages for termination number. * Some configurations will be special orders. Contact Switchcraft. * Some configurations may not be possible. * Larger plug (#45) will be supplied in place of #40 when used with cable "A". TYPICAL STANDARD PART NUMBERS STRAIGHT 2-CONDUCTOR PHONE PLUG (#05) TO: Cable Length (feet) Part Number1 (phono plug) #05 A 6 05HA07205 (stripped wires) #84 A 3 05HA03684 A 6 25HA07282 F 10 25HF12082 D 6 40HD07240 Termination (other end) PHONO PLUGS (#25) TO: (phono jack) #82 DUAL PHONO PLUGS (#25) TO: (dual phono jacks) #82 3.5mm MINIATURE PLUG (#40) TO: (3.5 mm plug) #40 1. All cables listed here are black. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 PATCH CORDS & MOLDED CABLE ASSEMBLIES MOLDED CABLE ASSEMBLIES PART NUMBERING SYSTEM 260 PATCH CORDS & MOLDED CABLE ASSEMBLIES GENERAL CABLE GUIDE PHONE: 773 792-2700 PATCH CORDS & MOLDED CABLE ASSEMBLIES * Please visit the product pages on our website for the most up-to-date product information STANDARD CABLE GUIDE FOR MOLDED CABLE ASSEMBLIES ON PAGE 253 THROUGH 259 Cable Type Color Description Cable Code W1000 Beige W1000-1 Gray W1000-2 Black W1021-1 Gray W1021-1 Black W1013-1 Gray 2 conductor, plastic unshielded parallel with 2, 18 AWG stranded conductor; W1013-2 Black .11" (2.8 mm) x .21" (5.3 mm) outside diameter, UL type SPT-1 W1032-1 Gray 48 coax, plastic jacket over spiral shield with 25 AWG stranded center W1032-2 Black conductor; .11" (2.8 mm) outside diameter. Average capacity 35 pF/feet W1041-1 Gray 2 conductor, plastic unshielded tandem cable with 2, 24 AWG stranded W1041-2 Black conductor; .06" (1.5 mm) x .12" (2.9 mm) W1065-2 Black 50 coax, plastic jacket over braid shield with 26 AWG stranded center conductor; 50 coax, plastic jacket over spiral shield with 22 AWG stranded center conductor; .156" (3.96 mm) outside diameter. Average capacity 31 pF/feet, UL style 1354 2 conductor, plastic jacket over shield with 2, 22 AWG conductor; .20" (5.2 mm) outside diameter. Average capacity 20 pF/feet between conductor; 55 pF/feet between Gray Gray W1230-4 Beige W1230-5 White W1243-2 Black K D Y E 2 conductor, twin coax, plastic jacket over 2 individually shielded 25 AWG parallel conductor. Average capacity 36 pF/feet, recommended for headset applications W1230-1 B shorted conductor to shield; 32 pF/feet each conductor to shield, UL style 2092 .1" (2.5 mm) outside diameter. Average capacity 30 pF/feet, RG-174 W1072-1 A 2 conductor,plastic unshielded with 2, 18 AWG stranded conductor; .25" (6.4 mm) outside diameter, UL type SVT F V 75 coax, plastic jacket over shield with 27 AWG stranded center conductor; .15" (3.8 mm) outside diameter. Average capacity 20.5 pG/feet, UL style 1354 or 1436 W1033-1 Gray 2 conductor, plastic unshielded parallel with 2, 20 AWG stranded conductor; W1033-2 Black .10" (2.54 mm) x .19" (4.7 mm) outside diameter, UL style 2433 W1096-2 Black 2 conductor, plastic unshielded parallel with 2, 22 AWG stranded conductor; X C Z .08" (1.9 mm) x .15" (3.8 mm) outside diameter See page 251 for Cable Assembly Termination vs. Cable Cross Reference Table. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery PATCH CORDS & MOLDED CABLE ASSEMBLIES CROSS REFERENCE GUIDE FAX: 773 792-2129 261 * Please visit the product pages on our website for the most up-to-date product information CROSS REFERENCE GUIDE T E R M I N A T I O N RA40 RA41 RA200 RA202 RA205 RA207 RA700 RA710 RA712A RA722A RA760 RA765 RA850 ST35 ST40 ST60 ST121 ST123 ST125 ST131 ST200 ST230 ST700 ST710 ST740 ST750 ST760 ST760L ST765 ST765L ST850 ST900 Cable W W 1 1 0 0 2 0 1 0 1 # W 1 0 1 3 # W 1 0 3 2 # W 1 0 4 1 # W 1 0 6 5 2 W 1 0 7 2 1 X X X X X X X X X X X X X 1 1 1 1 1 X X 1 1 1 1 1 X 2 2 2 2 1 X X X X X X X X X X X X X X X X X X X X X X X X X 1 1 1 X X 1 1 X 1 1 1 2 2 2 W 1 2 3 0 # W 1 2 4 3 2 W 1 0 3 3 # W 1 0 9 6 2 X X X X X 1 1 1 1 X X X X 1 1 1 1 1 1 X X 1 1 X X X 1 1 1 1 3 X 2 2 2 2 2 2 2 2 2 X X X X 1 1 X X 1 1 1 X X 1 1 X 2 X X X 1 1 X X X 1 1 1 X X 1 1 1 2 2 2 2 2 X 1 1 2 X X X X X X X X X X X X X 1 X X X X 1 1 X X X X X X X X X X 1 X X 1 3 X 3 X 3 X X X X X X X X X 3 X X X 3 X X X X 1 X 1 X 1 2 X # - Indicates any number. X - Indicates that the cable in this column and the termination in this row can be used together in a standard part number. 1 - These cable assemblies may use heat shrink tubing under overmolded terminations. 2 - These cable assemblies have two of the same termination at one end. Each termination is molded in a different color. 3 - These cable assemblies use a larger overmold than is pictured in the Engineering Design Guide. 4 - Other termination/cable combinations may be available on special order. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 PATCH CORDS & MOLDED CABLE ASSEMBLIES STANDARD CABLE ASSEMBLY TERMINATION vs. CABLE CROSS-REFERENCE 262 PATCH CORDS & MOLDED CABLE ASSEMBLIES 1/4" TELEPHONE PATCH CORDS AND MIL TYPE 1/4" PATCH CORDS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information PATCH CORDS & MOLDED CABLE ASSEMBLIES 1/4" TELEPHONE PATCH CORDS Switchcraft premium 3-conductor single patch cords are designed for rugged, noise-free performance. Nickel-plated plugs eliminate the need for periodical cleaning which keeps your audio signals clear. Color cords provide instant visual identification with a choice of three lengths. All cables are fully shielded with rugged, braided thermoplastic outer jackets. Plug handles are black. Audio patch cords are available with other lengths and brass plugs, if desired. Contact Switchcraft for specifying assistance and cable length tolerances. SERIES 20Q MIL TYPE 1/4" PATCH CORDS Switchcraft Patch Cords are available in a variety of types to meet requirements of communication, industrial and telephone switchboard applications. Patch cords are constructed of high quality bronze tinsel covered with thermoplastic insulating material with braided shield and black thermoplastic braid woven over the insulated conductors. Switchcraft MIL-type Littel-Plug (R) and Twin-Plug (R) phone plugs with brass finish are attached to these quality cords. Design and material used in strict accordance with Specification MIL-P-642(A). Cords have an identifying label on cord and hot stamping on plug handle. SERIES 20Q 3-CONDUCTOR TELEPHONE-TYPE PATCH CORDS 1/4" diameter plug fingers, black handle, color cable PART NUMBERING SYSTEM 2 0 PLUG Q CABLE 3-cond. Shielded 2-cond. nylonbraid sheath 2 LENGTH* D - 2' F - 3' H - 4' 0 PLUG FINGER FINISH CABLE COLOR* 3-cond. N-Nickel plated B-Natural brass 0-Black 2-Red 5-Green 6-Blue SERIES 18Q Red handle, brass finger * Contact Switchcraft for other lengths and colors. SERIES 18Q: Used in broadcasting, studio recording, sound, and other applications where space is at a premium. Utilizes Series 88Q 2-conductor shielded cord, with a Switchcraft 482 Littel-Plug phone plug with red handle (PJ-051) connected to each end. Shield grounded to sleeve of both plugs, and two leads wired tip-to-tip, ring-to-ring. Standard cord color: black. Other lengths and colors: gray, red, green (special order). Series 18Q provides same or greater number of circuits in a given space than cords using "Twin-Plug" dual telephone plugs. Length feet (m) 0.5 1 2 3 4 6 10 (.152) (.305) (.610) (.914) (1.219) (1.829) (3.048) DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Series 18Q, Plug Type 482 Part Replacement Number Cord Used 18QA18 18QB18 18QD18 18QF18 18QH18 18QK18 18QN18 89QA89 89QB89 89QD89 89QF89 89QH89 89QK89 -- Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery PATCH CORDS & MOLDED CABLE ASSEMBLIES COMBINATION AND MIL-TYPE PATCH CORDS FAX: 773 792-2129 263 * Please visit the product pages on our website for the most up-to-date product information COMBINATION PATCH CORDS CPC102A SERIES CPC104: Standard 3-conductor, 414 Twin-Plug (.25 " outside diameter finger) on one end; miniature 3-conductor, TT263, TT Twin-Plug on other end. Wired at 5-conductor tips-to-tips, rings-to-rings, all sleeves to cable shield. 6, 10, 15, 20 and 25 foot lengths. Series CPC Combination Patch Cords provide convenient interconnections between standard telephone-type jacks (3-conductor, .25" inside diameter sleeve) and miniature telephone-type jacks (3-conductor, .173" inside diameter). Series CPC cords are ideal for connection in telephone, data processing and other telecommunication applications where both standard and miniature jacks are available for patching. FEATURES 1. Rugged, telephone-quality tinsel conductors, with slate gray, braided thermoplastic jacket with flex relief reinforcements at point of entry into each plug handle. Part Number Length Description CPC102A CPC102D CPC102F CPC102K CPC102N CPC102R CPC102T CPC102U 6 inches 2 feet 3 feet 6 feet 10 feet 15 feet 20 feet 25 feet Standard 3-conductor (483) telephone plug (.25" outside diameter finger) on one end; miniature (253) tini-telephone(R) 3-conductor (.173" outside diameter. finger) plug on other end.(See Schematic). Special order only; contact factory for price and delivery. 2. Series CPC cords, eliminates the need for a separate adapter or field-fabricated combination cords. 3. Switchcraft (on special order) can assemble cords of any practical length. SERIES CPC101: Standard 2-conductor, 413 Twin-Plug (.25" outside diameter finger) on one end; miniature, 3-conductor TT253, TT Twin-Plug (.173" outside diameter finger) on the other end. One twin plug tip to miniature plug ring. All sleeves connected to cable shield. 6, 10, 15, 20 and 25 foot lengths. MIL-TYPE 1/4" TWIN PATCH CORDS Series 22Q SERIES 22Q: For use in telephone patching, broadcasting, studio recording, high-quality public address systems, telephone, telecommunications, and instrumentation systems. Uses 4-conductor shielded cord with Switchcraft Number 414 Twin-Plug(R) connected to each end. Shield is grounded to sleeve of each plug and individual leads wired tip-to-tip and ring-to-ring. Twin-Plug 414 is a 6-circuit plug with electrically independent tip circuits and ring circuits, with plug fingers spaced on .625" center to fit standard twin jacks. A self-aligning feature accommodates errors in jack location. Standard lengths: 1 feet to 10 feet; standard color: black. Other lengths and colors are available. Part Number 22QB22 22QD22 22QF22 22QK22 22QN22 Length, feet (m) 1 (.305) 2 (.610) 3 (.914) 6 (1.829) 10 (3.048) Special order only; contact factory for price and delivery. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 PATCH CORDS & MOLDED CABLE ASSEMBLIES SERIES CPC103: Standard 2-conductor, 413 Twin-Plug (.25 " outside diameter finger) on one end with cable-connected shield to sleeve; two independent tip circuits. Other end miniature, TT261, TT Twin-Plug (.173" outside diameter finger) in the same wiring. 6, 10, 15, 20 and 25 foot lengths. 264 PATCH CORDS & MOLDED CABLE ASSEMBLIES MINIATURE TT(R) BRAIDED PATCH CORDS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information PATCH CORDS & MOLDED CABLE ASSEMBLIES MINIATURE TT(R) BRAIDED PATCH CORDS TT720 Single, 2-Conductor TT740 Single, 3-Conductor CABLE AND PLUG FINGER COMBINATIONS 2-Conductor Patch Cord. Two-conductor Bantam-Type(R) plug, Switchcraft TT251 at each end. Shield (75% coverage) is grounded to each plug sleeve. Tinsel conductor is wired tip-to-tip. Standard color: black. Other colors and lengths are available on special order. Part Number TT722 TT724 TT726 TT727 TT728 TT729 Description 2-conductor single, brass finish on plug fingers, black handle and cord. Identifying label on cord. Length, feet (m) 1 (.305) 2 (.61) 3 (.914) 4 (1.219) 5 (1.524) 6 (1.829) 3-Conductor Patch Cord. 3-conductor Bantam-Type plug (Switchcraft TT253) at each end. Wiring is the same as TT724, except also has ring-to-ring wiring. Part Number TT741 TT742 TT744 TT746 TT747 TT748 TT749 Part Number TT741N0 TT742N0 TT744N0 TT746N0 TT747N0 Description 3-conductor single, brass finish on plug fingers, black handle and cord. Identifying label on cord. Description1, 2 3-conductor single, nickel-plated plug fingers (brass available) black handles and cord. Length, feet (m) 0.5 (.152) 1 (.305) 2 (.61) 3 (.914) 4 (1.219) 5 (1.524) 6 (1.829) TT860 Twin, 3-Conductor 3-Conductor Twin Patch Cords. 5-circuit patch cords use two 3-conductor twin Bantam-Type plugs, Switchcraft TT-263, at each end. Sleeve circuits are wired common, and tinsel conductors are wired tip-to-tip and ring-to-ring (see schematic). Polarizing handle notches indicated plug fingers with interconnected tip and rings. Standard color: black. Other colors and lengths are available on special order. Part Number TT861 TT862 TT864 TT866 TT867 TT868 TT869 Description 3-conductor twin, brass finish on plug fingers, black handle and cord. Identifying label on cord. Length, feet (m) 0.5 (.152) 1 (.305) 2 (.61) 3 (.914) 4 (1.219) 5 (1.524) 6 (1.829) 1. For brass fingers, substitute "B" for "N" in part number. Special order only. 2. "0" in part number denotes black handle and cord. Substitute the following for "0" to specify other color cords: 2-Red 5-Green 6-Blue Special order only; contact Switchcraft for prices and delivery. Length, feet (m) 0.5 (.152) 1 (.305) 2 (.61) 3 (.914) 4 (1.219) CABLE AND PLUG FINGER COMBINATIONS DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery (R) PATCH CORDS & MOLDED CABLE ASSEMBLIES MINIATURE TT MOLDED PATCH CORDS AND TELEPHONE COUPLERS FAX: 773 792-2129 265 * Please visit the product pages on our website for the most up-to-date product information MINIATURE TT(R) MOLDED PATCH CORDS (continued) TT101 TT102 TT103 TT104 TT105 TT106 TT107 TT108 TT109 TT110 TT111 TT112 TT113 TT114 TT115 Length feet (m) 0.5 (.152) 1.0 (.305) 1.5 (.457) 2.0 (.610) 2.5 (.762) 3.0 (.914) 4.0 (1.219) 5.0 (1.524) 6.0 (1.829) 7.0 (2.134) 8.0 (2.438) 9.0 (2.743) 10.0 (3.05) 11.0 (3.353) 12.0 (3.658) TT121 TT122 TT123 TT124 TT125 TT126 TT127 TT128 TT129 TT130 TT131 TT132 TT133 TT134 TT135 Part Numbers Series TT140 Series TT160 TT141 TT161 TT142 TT162 TT143 TT163 TT144 TT164 TT145 TT165 TT146 TT166 TT147 TT167 TT148 TT168 TT149 TT169 TT150 TT170 TT151 TT171 TT152 TT172 TT153 TT173 TT154 TT174 TT155 TT175 Length feet (m) 0.5 (.152) 1.0 (.305) 1.5 (.457) 2.0 (.610) 2.5 (.762) 3.0 (.914) 4.0 (1.219) 5.0 (1.524) 6.0 (1.829) 7.0 (2.134) 8.0 (2.438) 9.0 (2.743) 10.0 (3.05) 11.0 (3.353) 12.0 (3.658) TELEPHONE PATCH COUPLERS TT-couplers interconnect 2- or 3-conductor patch cords terminated with Switchcraft standard or tini-telephone(R) plugs, also similar telephone plugs with compatible finger shape and dimensions. Handle Color Black Red Black Red Metal Metal Metal Cond. 2 2 3 3 3 2 3 TT120 SERIES TT140 SERIES TT160 SERIES TT-REPLACEMENT CORDS TELEPHONE COUPLERS AND ADAPTERS Part Number TT281 TT282 TT283 TT284 TT289 361A 362A TT100 SERIES Input ID Inch (mm) Output ID Inch (mm) .175 (4.44) .175 (4.44) .175 (4.44) .25 (6.35) .25 (6.35) .25 (6.35) Series TT700 cords have bronze tinsel conductors covered with thermoplastic insulation. A braided shield surrounds the conductors, and the cord is finished with a braided black thermoplastic jacket. Cord ends are reinforced to accept the internal threaded end of a TT-Phone Plug(R) plug. Used as a replacement cord for Series TT720 and TT740 patch cords, and used on TT-Twin Plug(R) plugs, Series TT260, in dual cable assemblies with 2- and 3-conductor (or combinations) plug fingers requiring independent tip, ring and sleeve circuits, and for single cable assemblies where supplementary cross-over wiring is needed for common tip, ring and/or sleeve circuits. TT701 - Length 6" (152.4 mm). TT709 - Length 6' (1.829 m). Special order only; contact factory for prices and delivery. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 PATCH CORDS & MOLDED CABLE ASSEMBLIES Part Numbers Series TT100 Series TT120 266 PATCH CORDS & MOLDED CABLE ASSEMBLIES VIDEO PATCH CORDS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information PATCH CORDS & MOLDED CABLE ASSEMBLIES VIDEO PATCH CORDS Switchcraft new broadcast series video patch cords are available in eight base ten color codes. Our cable is a high performance serial digital 75 Ohm RG59 type. This unique low-loss cable is ideal for "True" 75 Ohm HD patching as well as conventional analog signals. The jacket is made flexible with very low retract memory. FEATURES: * Rugged nickel-plated handles knurled for positive finger grip. * Flexible black "boot" placed on all cable colors for more positive grip and cable strain relief. * Overall flexible jacket for easy coil and low retract memory. SPECIFICATIONS: Plug Housing: Plug Contact Pin: Cable: Nickel-plated, copper alloy. Gold-plated, copper alloy. Conductor: 22 AWG (19 x 34) Stranded BC Shield: 95% BC Braid Dielectric: .146", 3.70mm, Cellular (Foam) PE Jacket: Matte Finish PVC Nom. Imp: 75 Ohm VMP VP Video Patch Length (Feet) Cable Color Part Numbering System Video Patch Cords Standard .090 WECO Midsize Video Patch Colors Black Red Orange Yellow Green Blue Purple Gray Midsize Video Patch VMP Video Patch Video Patch VP VMP Length (Feet) Length (Feet) Color Code = = = = = = = = Cable Color BK R O Y GN BL P GY Stock Lengths 1' 2' 3' 4' 5' 6' 7' 8' 9' 10' Standard .090 WECO VP (Custom lengths are available by request) DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery PATCH CORDS & MOLDED CABLE ASSEMBLIES BROADCAST SERIES FAX: 773 792-2129 267 * Please visit the product pages on our website for the most up-to-date product information PATCH CORDS & MOLDED CABLE ASSEMBLIES 3-CONDUCTOR TT PATCH CORDS: ANALOG / AES/EBU AUDIO AND RS422 PATCHING Switchcraft single 3-conductor TT audio patch cords have now been designed with a low capacitance cable which at 110 Ohms is ideal for digital audio AES/EBU and SMPTE Mtime code patching. The overall jacket is now flexible in eight colors. The nickel plated plugs allow for non-tarnishing and the overmolded handle-boot reduces strain off the cable when pulled. Switchcraft dual 3-conductor TT patch cords have also been redesigned with an overall flexible cable and six colors to choose from. Like the single TT the dual plugs are nickel plated and flexible. These cords work with all Switchcraft TT stereo spaced bays for analog audio and RS422 data patching. SPECIFICATIONS Standard plug terminations are single 3-conductor TT. Plug handle is molded thermoplastic. Plugs: Tip Rod, Ring and Sleeve - Copper Alloy Cable: 26 AWG (30x40) OFBC, 110 Ohm Low Capacitance. Jacket is Matte PVC Dual Bantam TT TTD TTD TT Tiny Telephone Length (Feet) Cable Color Part Numbering System Video Patch Cords Single Bantam TT Dual Bantam TT Tiny Telephone Dual Video Patch TT TTD Length (Feet) Cable Color Length (Feet) Cable Color TTD Not available in purple or gray. Colors Black Red Orange Yellow Green Blue Purple Gray Color Code = = = = = = = = BK R O Y GN BL P GY Stock Lengths 1' 2' 3' 4' 5' 6' 7' 8' 9' 10' Single Bantam TT TT (Custom lengths are available by request) 1 Foot (12" inches) equals 3.28 meters DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 268 NOTES PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information www.switchcraft.com (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery SWITCHES MINIATURE KEYBOARD SWITCHES - SERIES 9800 FAX: 773 792-2129 269 * Please visit the product pages on our website for the most up-to-date product information MINIATURE KEYBOARD SWITCHES IBS MINIATURE SWITCHES SERIES 98000R SWITCHES Momentary IBS switches provide cost-effective versatility for a wide range of electrical/electronic applications including switching analog and digital signals in business systems, public address, test instruments, medical, EDP (computer), input devices and peripheral equipment, local area network, telecommunication, digital transmission equipment, telephone systems and attachments and calculators. Convenient modular design allows quick assembly to PC boards. These switches are also available in multiple station assemblies (see page 308). SPECIFICATIONS MECHANICAL Switch Actuation: Momentary Plunger Travel: .144" (3.66 mm). Actuation Force (Full Travel): 12-15 ounce (340-425 grams). Life: 1 million operations. ORDERING STANDARD SWITCHES Order switches and pushbuttons by part numbers from table. ELECTRICAL UL approved at .25 A @ 28V DC and .125 A @ 125V AC PART NUMBERS Part No.1 MATERIALS Description Circuit Momentary 1-C 982A01R Housing: Molded thermoplastic UL 94V-0 Plunger: Molded thermoplastic UL 94V-0. Contactors: Copper alloy. Terminals: Copper alloy, solder-plated. Contact Surfaces: Gold-plated. 1-A 982A03R 982A06R 2-C 1 Order pushbuttons separately. ORDERING SPECIAL SWITCHES MOUNTING Switches have .157" (4 mm) long PC terminals for mounting on single- or double-sided PC boards up to .094" (2.4 mm) thick on 0.394" (10 mm) minimum centers in rows or arrays. 0.394" (10 mm) PC terminals available on special order. Rugged molded-in standoff legs provide stable mounting and clearance for PC board cleaning. Contact your Switchcraft representative with full specifying details. SPECIAL ORDER FEATURES * Other circuitry - 1B, 2A or 2B * Longer terminals - .394" (10 mm) long. IBS SWITCH CATALOG NUMBERING SYSTEM 98 X X XX D R SERIES * 98 - 98000R D - Make-Before-Break (Shorting Contacts) (Use with 03, 06 circuits only when required.) MECHANICAL FUNCTIONS * 2 - Momentary TERMINALS * A - .157" (4 mm) B - .394" (10 mm) * CIRCUITS 01 - 1A 02 - 1B 03 - 1C* 04 - 2A 05 - 2B 06 - 2C Special order only; contact Switchcraft for price and delivery. * Non-shorting (break-before-make) contacts DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 Dim. A .157" (4 mm) 270 SWITCHES KEYBOARD SWITCH PUSHBUTTONS PHONE: 773 792-2700 SWITCHES * Please visit the product pages on our website for the most up-to-date product information TERMINAL FUNCTION BY TERMINAL NUMBER First Pole1 Circuit 1-A 1-B 1-C 2-A 2-B 2-C N.O. 3 3 3 3 N.C. 1 1 1 1 Second Pole Common 2 2 2 2 2 2 N.O. 6 6 N.C. 4 4 Common 5* 5* 5* 5* 5* 5* RECOMMENDED PC BOARD LAYOUT (.300 x .100) (Component Side) 3 6 2 5 1 4 *Pin 5 is used as a support pin for switch mounting and has no electrical connection. 1. N.O.= normally open; N.C.= normally close. KEYBOARD SWITCH PUSHBUTTONS Pushbuttons designed for IBS switches are available in white, black, red, blue, and gray. Other colors are available on special order. Pushbutton faces are concave for operator convenience and can be mounted either horizontally or vertically. Pushbuttons must be ordered separately, but may be factory installed, if desired, at extra cost. TYPE I TYPE II Character Height Horizontal Mount inches (mm) (Char. Max.) 1/8" (3.175) 3/32" (2.381) 5/64" (1.984) I 3 4 4 II 4 5 5 Character Height Vertical Mount inches [mm} (Char. Max.) HORIZONTAL MOUNT LEGEND AREA VERTICAL MOUNT PART NUMBERS Type I Type II Color Type I Type I I Color P2936 P2937 P2938 P2939 P2940 P2951 P2952 P2953 P2954 P2955 White Black Red Yellow Green P2941 P2942 P2943 - - P2956 P2957 P2958 P2979 P2992 Blue Gray Brown Cream Tangerine I 1 2 2 1/8" (3.175) 3/32" (2.381) 5/64" (1.984) II 1 2 3 LEGEND AREA Special order only; contact Switchcraft for price and delivery. LEGENDS Engraved letters and numbers are available on special order. A-Z, ON and OFF in Condensed Block typeface are available. Other custom legends may be supplied (please inquire). Refer to drawing and chart for legend data. TYPE I PUSHBUTTON DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com TYPE II PUSHBUTTON Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery SWITCHES (R) UNISWITCH SWITCHES - SERIES US & LUS FAX: 773 792-2129 271 * Please visit the product pages on our website for the most up-to-date product information UNISWITCH (R) SWITCHES SERIES US - Non-illuminated, SERIES LUS - Illuminated Cost-effective Uniswitch switches are lighted or non-lighted momentary switches featuring snap-in mounting in a single hole and a choice of solder/screw (#5-40), solder/quick-connect (AMP FASTON(R) 110) 60967-1, or stand-off PC terminals. Molded housing protects internal parts, and bezel functions as built-in escutcheon. Series LUS accepts T 1-3/4 bi-pin lamps. (Lamps not included.) (R) FASTON is a registered trademark of AMP INC. SWITCHES MOUNTING "Snap-in" mounting is in .617" (15.67 mm) minimum square hole for row or matrix mounting. Panel thickness: .047" (1.19 mm) to .266" (6.76 mm) maximum. To mount, simply press switch into panel; "Adjusto-Clip" locking tabs engage panel and hold switch securely. Behind panel distance is 1.312" (33.32 mm) minimum. SPECIFICATIONS Switch Housing: Molded plastic, charcoal gray only. "Adjusto-Clip": Copper alloy. Contactor: Copper alloy plated. Form 1-A rated: 250 mA, 30 W maximum, AC, non-inductive load. Terminals: Copper alloy, silver-plated. Pushbuttons: Molded plastic in 8 colors. Operating Force: 12 - 16 ounce (340-454 grams). SPECIAL ORDER FEATURES * Other contactor platings. * Engraved legends (See page 270). * Other pushbutton colors. * "Adjusto-Clips" set to positions 2, 3, 4, or 5. "ADJUSTO-CLIP" MOUNTING Panel Thickness Inch (mm) Position Number 1* 2 3 Min. .047 (1.2) .094 (2.4) .141 (3.6) Max. .078 (2.0) .125 (3.2) .172 (4.4) Panel Thickness Inch (mm) Position Number 4 5 Min. .188 (4.8) .234 (6.0) Max. .219 (5.6) .266 (6.8) * "Adjusto-Clips" normally installed in this position unless otherwise specified. PART NUMBERS (Order switches and pushbuttons separately) Terminal Type/Part Number; Series US Solder/ Printed Solder/ Screw Circuit Quick-Connect Terminal Type/Part Number; Series LUS1 Solder/ Printed Solder/ Screw Circuit Quick-Connect US001 LUS001 LUS001PC US001PC US001ST LUS001ST 1. Lamp not included. Special order only; contact Switchcraft for price and delivery. PUSHBUTTONS* Part Number P23491 P23492 P23493 P23494 (Pushbuttons ordered separately from switches.) Color Red Black Green Blue Part Number P23495 P23497 P23498 P234913 * Extra replacement pushbuttons can be ordered separately. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 Color White Orange Yellow Amber 272 SWITCHES UNISWITCH(R) SWITCHES - SERIES BXR PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information SHOWN ACTUAL SIZE BOX SWITCH(R) SWITCHES SWITCHES BXR013PC Rear view, BXR013PC PC Terminals. Rear view, BXR056 Solder Lug/Quick-Connect Terminals. SERIES BXR Economical momentary, non-illuminated switches feature "Adjusto-Clip" snap-lock mounting and selection of switching. Bezel trims mounting and enclosed construction protects against dust, dirt, and physical damage. Color pushbuttons have concave face for positive "feel". MOUNTING Front mount in .620" (15.75 mm) minimum square hole. Solder lug/quick-connect terminals accept AMP FASTON(R) 110 terminals; PC terminals fit boards up to .281" (7.14 mm) thick. "Adjusto-Clip" permits mounting in panels from .047 " (1.19 mm) to .281" (7.14 mm) thick. (R) FASTON is a registered trademark of AMP INC. PART NUMBERS Pushbutton Color/Part Number Black Red Green Circuits White Solder Lug/Quick-Connect Terminals BXR021 BXR023 BXR026 BXR0210 BXR011 BXR013 BXR016 BXR0110 BXR031 BXR033 BXR036 BXR0310 BXR051 BXR053 BXR056 BXR0510 1-A 1-C 2-C 2-A + 2-C BXR051PC BXR053PC BXR056PC BXR0510PC 1-A 1-C 2-C 2-A + 2-C PC Terminals BXR011PC BXR013P BXR016PC BXR0110PC BXR021PC BXR023P BXR026PC BXR0210PC BXR031PC BXR033PC BXR036PC BXR0310PC Special order only; contact factory for price and delivery. SPECIFICATIONS Housing: Molded plastic, charcoal gray only. Pushbutton: Molded plastic; red, black, green, and white standard. "Adjusto-Clip" Mounting Frame: Copper alloy, plated. Contact Springs: Copper alloy, plated. Contacts: Integral, copper alloy, plated. 1-A, 1-C, 2-C, or 2-A + 2-C Switching: 250 mA, 30 W max., AC, non-inductive load. Terminals: Copper alloy, silver-plated. "ADJUSTO-CLIP" MOUNTING POSITIONS Panel Thickness Inch (mm) Position Number Minimum Maximum 1* 2 3 4 5 .047 (1.2) .094 (2.4) .141 (3.6) .188 (4.8) .234 (6.0) .094 (2.4) .141 (3.6) .188 (4.8) .234 (6.0) .281 (7.1) * "Adjusto-Clips" normally installed in this position unless otherwise specified. SPECIAL ORDER FEATURES * Other contact platings. * Engraved legends (see page 270). * Other pushbutton colors. * "Adjusto-Clips" set to positions 2, 3, 4, or 5. SCHEMATIC RECOMMENDED PC BOARD LAYOUT PANEL CUTOUT DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery SWITCHES (R) (R) BUTTON-SWITCH & TINI-SWITCH - SERIES 903, 913, 923, 933, 950, 960 FAX: 773 792-2129 (R) (R) 273 * Please visit the product pages on our website for the most up-to-date product information BUTTON-SWITCH(R) SWITCHES 903 TINI-SWITCH(R) SWITCHES 923 SPECIFICATIONS Body: Copper alloy, plated. Pushbutton: Molded red or black plastic, integral with shaft. Insulation: Rigid plastic. Springs: Integral contacts, plated. Ratings: 250 mA, 30 W maximum, AC, non-inductive load. Solder Terminals: Copper alloy, silver-plated. Locknuts: Copper alloy, plated. Series 903, 913: P-1053-1. Series 923, 933: P-1150-1. Lockwasher: Series 903, 913: Steel, P-1060-3 Flat Washer: Series 923, 933: Steel, plated, S-1790-1 Switches mount from rear in .250" (6.35 mm) diameter hole in panels up to .094" (2.39 mm) thick. Mounting washers and locknuts are supplied. SPECIFICATIONS Bushing: Copper alloy, plated. Pushbutton: Molded plastic, integral with shaft. Insulation: Rigid plastic. Springs: Copper alloy. Contacts: Integral contacts are standard. .25 A, 30 W maximum, AC, non-inductive load. Washer: Steel, plated, S17901. Locknut: Copper alloy, plated, P11501. * Other pushbutton colors. * Legends. * Other pushbutton colors. * Legends. PART NUMBERS PART NUMBERS Panel Mounting Pushbutton Color/Part Number Circuit Rear MOUNTING SPECIAL ORDER FEATURES SPECIAL ORDER FEATURES Front SERIES 950, 960 Momentary Tini-Switch(R) switches are miniaturized versions of Littel-Switch(R) switches (see page 274 for construction details). .25 A contacts are intended for low-power switching where contact resistance is not critical. Red or black pushbuttons, solder lug terminals and choice of 1-A, 1-B and 1-C switching is standard. Red 903 903D 923 923D Black 913 913D 933 933D 1 Schematic 1-C 1-D 1-C 1-D 1. Circuits C or 1-D can be wired for either 1-A or 1-B switching Special order only; contact Switchcraft for price and delivery. Pushbutton Color/Part Number Black 951 961 1-A, SPST, (N.O.) 952 962 1-B, SPST, (N.C.) 953 963 Series 923 & 933 1-C, SPDT Special order only; contact Switchcraft for price and delivery. .453 (11.5) Series 903 & 913 Circuit Red Series 950 & 960 DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 Schematic SWITCHES SERIES 903, 913, 923, 933 These small momentary switches are completely enclosed in rugged metal housing. Front or rear-panel mount types offer 1-A, 1-B, 1-C, or 1-D switching. Red or black pushbuttons and solder terminals are standard. Series 903 and 913 are front mount in .469" (11.91 mm) diameter hole in panels up to .297" (7.54 mm) thick. Series 923 and 933 are rear mount in .250" (6.35 mm) diameter hole in panels up to .156" (3.96 mm) thick. Mounting hardware is supplied. 274 SWITCHES LITTEL-SWITCH (R) SWITCH WS SERIES 100, 100S, 200, 200S PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information LITTEL-SWITCH SWITCHES (R) PART NUMBERS Pushbutton Color/Part Number SWITCHES Red 101 102 103 SERIES 100, 100S, 200, 200S Momentary switches feature leaf springs, insulating spacers, notched insulating washers and plated copper alloy bushing assembled into a rugged, reliable, long-life switch for limited space applications. Series 100 and 200 have integral .25 A contacts intended for low power switching where contact resistance is not critical. Series 100S and 200S have 3 A fine silver contact. Red and black pushbuttons, solder lug terminals and choice of 1-A, 1-B or 1-C switching are standard. Shaft and pushbutton molded as one piece. Captive shaft extends through bushing, actuated leaf springs. Notched phenolic washers insulate springs and interlock all members, eliminating possibility of springs shifting. All springs are insulated from bushing. Circuit Schematic Black 101 201 101S 201S 102 202 102S 202S 103 203 103S 203S 1-A, SPST, (N.O.) 1-B, SPST, (N.C.) 1-C, SPDT Special order only; contact Switchcraft for price and delivery. "S" at the end of part number indicates 3H rated fine silver contacts. SPECIFICATIONS Bushing: Copper alloy, plated. Pushbutton: Molded plastic, integral with shaft. Insulation: Rigid plastic. Springs: Copper alloy. Contacts: Integral contacts are standard. (Series 100, 200) .250 A, 30 W maximum, AC, non-inductive load. Riveted silver contacts (Series 100S, 200S); 3A, 300 W maximum AC, non-inductive load. Washer: Steel, plated, S10221. Locknut: Copper alloy, plated, P10001. SPECIAL ORDER FEATURES MOUNTING Switches mount from rear in panels up to .250" (6.35 mm) thick in .375" (9.52 mm) diameter holes. Locknuts and washers are supplied. * Other pushbutton colors. * Legends. * Welded crossbar palladium contacts for dry circuit. LEGENDS Switchcraft offers a wide variety of engraved legends on special order. Contact Switchcraft for details. SPST (NO) 1-A SPST (NC) 1-B DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com SPDT 1-C Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery FAX: 773 792-2129 SWITCHES (R) Hi-D SWITCH SWITCHES - SERIES H-100, H-100PC, H-200, H-200PC 275 * Please visit the product pages on our website for the most up-to-date product information HI-D SWITCH(R) PC MOUNT SWITCHES SERIES H-100, H-100PC, H-200, H-200PC COMPONENT SIDE SHOWN SERIES H100, H200 PART NUMBERS MOUNTING Rear of panel mount in .375" (15.87 mm) diameter hole in panels up to .156" (3.96 mm) thick. Behind panel space: 1.094" (27.79 mm) minimum. Mounting hardware supplied. Switches with PC terminals mount directly to PC boards, and may also be panel mounted with threaded bushing. SPECIFICATIONS Switch Housing: Molded plastic. Mounting Bushing: Copper alloy, plated. Pushbutton/Actuator: Thermoplastic, red or black with concave face. Contact Springs: Copper alloy, silver or gold-plated. Contacts: Integral, 1-A, 1-B, 1-C, or 1-D, 0. 25 A, 30 W maximum, non-inductive load. Contactor: Copper alloy, plated. Locknut: Copper alloy, plated. P10001 (supplied). Washer: Steel, nickel-plated. S10221 (supplied). Solder Lug Terminals PC Terminals Pushbutton Color/Part Number Pushbutton Color/Part Number Red Black Red Black H101 H102 H103 H103D H201 H202 H203 H203D H101PC H102PC H103PC - H201PC H202PC H203PC - Circuit Schematic 1-A 1-B 1-C 1-D See Below Special order only; contact factory for price and delivery. Series H-100, H-200 SPECIAL ORDER FEATURES Series H-100PC H-200PC * Other pushbutton colors. * Legends (see page 270). PART NUMBERS Series DA Button Color Circuit DA013 Red A-B DA023 Black A-B SERIES DA DA033 Green A-B Enclosed momentary pushbutton switch. Designed to meet switching requirements of computers, data processors, ground support systems, machine and process controls, test equipment and intercoms. Anodized aluminum body protects switch contacts from dirt, dust and bending during mounting. Terminals accept AMP Series 53 taper pins. Mount in .375" (9.5 mm) hole on .531" (13.5mm) centers. Behind panel depth .938" (23.8mm) minimum. DA043 Blue A-B DA053 White A-B DA083 Yellow A-B DA-SWITCH SWITCHES Schematic A-B contacts may be externally wired to provide a 1-C circuit as illustrated below. Special order only; contact Switchcraft for price and delivery. SPECIFICATIONS Housing: Aluminum, black anodized. Button: Thermoplastic, black. Terminal Base: Thermoset black phenolic. Terminals: Copper alloy, gold-plated. Contacts: Integral. 500 mA, 5 W maximum, non-inductive load. Contactor: Copper alloy, plated. Hardware: Supplied with one, P1970 aluminum, black anodized knurled mounting nut, and one, P1971 parkerized lockwasher. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 SWITCHES Compact, momentary switches mount on .625" (15.87 mm) centers in rows or matrix arrays and are the same height and panel size as Switchcraft's Hi-D Jack. Rugged "box" body protects contact springs against mechanical damage and keys them in precise alignment. Precision springs produce high contact pressure, smoother wear-reducing actuation, and positive "make-break". Recommended where contact resistance is not critical. 276 SWITCHES CORD-SWITCH (R) AND CORDETTE(R) CORD SERIES SWITCHES PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information (R) CORD-SWITCH CORD SWITCHES (R) CORDETTE CORD SWITCHES HOUSING DIA. .687" (17.5mm) Series 921 SWITCHES 2.125" LONG (53.98mm) E903 3" LONG (76.20mm) SERIES E900, ED900, EP900 Momentary cord (pendant) switches can be specified with red or black pushbuttons, 1-C or 1-D switching, solder terminals and metal handle (Series E900), plastic handle (Series EP900), or metal handle with clamp and strain relief (Series ED900). SERIES 921 Momentary, 0.5 A switching combined with 1-piece molded plastic body qualifies Cordette for all types of commercial and industrial usage. The 921 has a phono jack receptacle and a phono jack in handle to fit standard phono plugs. The 921K is molded with 6' (1.8 meter), 2-conductor cable (internal cable clamp). SPECIFICATIONS SPECIFICATIONS (See page 273 for switch specs.) Body: 921 and 921K - Molded gray plastic with contrasting trim and gray pushbutton. Switch Contacts: Integral copper alloy, plated, form 1-A, 0.5 A, 50 W maximum, AC, non-inductive load. Not recommended for high voltage circuits. Insulation: Thermoplastic UL 94V-0. Phono Jack Terminations: (921): Standard phono jack, similar to 3501FP (see Jacks and Plugs Section). SERIES E900, EP900: Housing: Series E900 - Copper alloy, plated. Series EP900 - Molded black plastic. Switch Bushing: Copper alloy, plated. Insulation: Rigid plastic. SERIES ED900: Housing: Die-cast zinc, plated. Switch Body and Insert Bushing: Copper alloy, plated. Insulation: Rigid plastic. Cable Relief Bushing: Black thermoplastic rubber. Pressure Plates: Stainless steel. Cable Relief Screws: Steel, plated. SPECIAL ORDER FEATURES * Other pushbutton colors. * Custom legends PART NUMBERS (examples) Pushbutton Color/Part Number Red Black E903 E913 ED903 ED913 EP903 EP913 E903D E913D ED903D ED913D EP903D EP913D Maximum Cable Outside Diameter Circuit .375" [9.5 mm] .375" [9.5 mm] .250" [6.4 mm] .375" [9.5 mm] .375" [9.5 mm] .250" [6.4 mm] 1-C SPECIAL ORDER FEATURES * * * * * 1-B, 1-C, or 1-A + 1-B switching. Red, green, blue, white or yellow pushbuttons. Legends (see page 270). Other body colors. ST-900 - Custom-molded to any of a large selection of cables (See Molded Cable Assembly Section). Also many cable terminations, i.e., phone plugs, extension jacks, phono plugs, spade lugs, alligator clips, stripped and tinned leads, etc. PART NUMBERS Part Number 921 921K Description Cordette switch, phono jack termination. Same as 921, except with 6' (1.8 meter), 2-conductor cable with stripped and tinned leads. 1-D Special order only; contact Switchcraft for price and delivery. SERIES ED900 SERIES 921 DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery (R) SWITCHES PUSH-LITE SWITCHES AND INDICATORS FAX: 773 792-2129 277 * Please visit the product pages on our website for the most up-to-date product information (R) PUSH-LITE SWITCHES AND INDICATORS Completely enclosed, lighted pushbutton switches feature long-life, highly-reliable, leaf-springs. Available with or without barriers, full or split-face display. Mounts with clamp-type bracket; no screws, washers or nuts needed. Can be mounted in vertical or horizontal rows and in matrixes. Accepts standard T 1-3/4 flange-base lamp (lamp not furnished with switch) in either 6 V to 28 V rating. Specify 1 lamp for single lamp type or 2 lamps for twin-lamp type when redundant or split-face lighting is required. Barriers and colored filter snap-inserts optional (order separately). Mounting hole (w/o barriers): 1" (25.4 mm) x .875" (22.23 mm); (w/barriers) 1.188" (30.16 mm) x .875" (22.23 mm). Panel thickness: .125" (3.18 mm) maximum. Behind panel depth 1.75" (44.45 mm) (minus panel thickness). Part Number Housing/ Pushbutton Color Switching AC Ratings (max.) Contacts non-inductive CIrcuits SWITCHES MOMENTARY Terminals SINGLE LAMP PL103205 PL106205 PL112205 PL126205 PL403205 PL406205 PL412205 PL706205 PL712205 Black/White Gray/White Black/White SPDT DPDT 4PDT DPDT SPDT DPDT 4PDT DPDT 4PDT 2 A, 125 V Palladium 8 A, 125V Silver 2 A, 125V Palladium 2 A, 125 V 1-C 2-C 4-C 2-C 1-C 2-C 4-C 2-C 4-C Solder Lug PC TWIN LAMP PL203205 PL206205 PL212205 PL226205 PL503205 PL506205 PL512205 PL803205 PL806205 PL812205 Black/White Gray/White Black/White SPDT DPDT 4PDT DPDT SPDT DPDT 4PDT SPDT DPDT 4PDT 2 A, 125 V Palladium 8 A, 125V Silver 2 A, 125V Palladium 2 A, 125 V 1-C 2-C 4-C 2-C 1-C 2-C 4-C 1-C 2-C 4-C WITHOUT BARRIERS Solder Lug PC PUSH-LOCK/PUSH-RELEASE Part Number Housing/ Pushbutton Color Switching AC Ratings (max.) non-inductive Contacts 2 A, 125 V Palladium 8 A, 125V Silver Circuits Terminals SINGLE LAMP PL103705 PL106705 PL112705 PL123705 PL126705 PL403705 PL406705 PL412705 PL703705 PL706705 PL712705 Black/White Gray/White Black/White SPDT DPDT 4PDT SPDT DPDT SPDT DPDT 4PDT SPDT DPDT 4PDT 2 A, 125V Palladium 2 A, 125 V 1-C 2-C 4-C 1-C 2-C 1-C 2-C 4-C 1-C 2-C 4-C Solder Lug PC TWIN LAMP PL203705 PL206705 PL212705 PL226705 PL506705 PL512705 PL803705 PL806705 PL812705 Black/White Gray/White Black/White SPDT DPDT 4PDT DPDT DPDT 4PDT SPDT DPDT 4PDT 2 A, 125 V Palladium 8 A, 125V Silver 2 A, 125V 2 A, 125 V Palladium 1-C 2-C 4-C 2-C 2-C 4-C 1-C 2-C 4-C Solder Lug PC Special order only; contact Switchcraft for price and delivery. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 WITH BARRIERS 278 SWITCHES PUSH-LITE (R) SWITCHES AND INDICATORS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information PUSH-LITE(R) SWITCHES AND INDICATORS (continued) U.L. LISTED, MOMENTARY & PUSH-LOCK/PUSH-RELEASE Part Number Housing/ Pushbutton Action1 Switching AC Ratings (max.) non-inductive M M PL/PR PL/PR SPDT DPDT SPDT DPDT M M PL/PR PL/PR SPDT DPDT SPDT DPDT Contacts Circuit Listing Terminals 8 A, 125 V 8 A, 125V 8 A, 125V 8 A, 125 V Silver 1-C 2-C 1-C 2-C UL UL UL UL Solder Lug 8 A, 125 V 8 A, 125V 8 A, 125V 8 A, 125 V Silver 1-C 2-C 1-C 2-C UL UL UL UL Solder Lug SINGLE LAMP SWITCHES 26U1003 26U1004 26U1007 26U1008 Black/White TWIN LAMP 26U1005 26U1006 26U1009 26U1010 Black/White Special order only; contact Switchcraft for price and delivery. NOTE: 1 M = Momentary; PL/PR = Push-Lock/Push-Release SERIES PL9000 - PL(R) INDICATORS Part Number PL9105 Create unlimited combinations of rows and/or matrix arrays with or without Push-Lite switches. A perfect match for front panel appearance Push-Lite switches - but functions only as a lighted indicator. Mounts same as Push-Lite switches: behind panel depth 1.341" (35.55mm) maximum uses same lamp, color filter, snap inserts, light divider and optional mounting barriers as Push-Lite(R) switches. Description Black housing; uses 1 or 2 lamps. White screen. Same as PL-9105 except gray housing. PL9205 PUSHBUTTON/INDICATOR SCREENS COLOR FILTER SNAP-INSERTS Series PL500 Pushbuttons/Indicator Screens are available separately for use with Push-Lite switches or PL Indicators for in-the-field substitution and/or replacement. Translucent plastic filters for special color coding in Push-Lite switch and PL Indicators. Use with white or clear pushbuttons. Part Number Color Part Number Color PL501 PL503 PL504 PL505 Red Green Blue White PL508 PL512 PL513 Yellow Clear Amber SERIES PL300 - Full Display Color Filters Part Number PL303 PL305 PL308 Color Green White Yellow OPTIONAL MOUNTING BARRIERS LIGHT DIVIDER Molded plastic barriers separate Push-Lite switches, PL Indicators, or combinations of Push-Lite switches and PL Indicators and prevent accidental operation of adjacent switches. Series PL100: end barrier. Series PL200: center barrier. Two required between adjacently mounted switches. Push-Lite switch is shown with two PL102 end barriers installed. Light divider for Push-Lite switch pushbuttons and PL Indicator screens; separates lighting from twin lamps. Order light divider for each switch or indicator specified where split-face lighting is desired. Order PL551. Part Number PL102 PL111 PL202 PL211 BASIC SCHEMATIC Switch circuitry can be described as combinations of basic schematic circuits as shown below. N.O. means normally open; N.C. means normally closed. Description End barrier, black End barrier, gray Center barrier, black Center barrier, gray Special order only; contact Switchcraft for price and delivery. The above are strictly electrical schematics and do not necessarily indicate relative solder lug positions. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery SWITCHES (R) PUSH-LITE SWITCHES PART NUMBERING SYSTEM FAX: 773 792-2129 279 * Please visit the product pages on our website for the most up-to-date product information PUSH-LITE(R) SWITCHES - PART NUMBERING SYSTEM P L LAMP & SWITCH HOUSING COLOR 1 - Single lamp, Black housing 2 - Twin lamp, Black housing 3 - Non-illuminated, Black housing 4 - Single lamp, Gray housing 5 - Twin lamp, Gray housing 6 - Non-illuminated, Gray housing 7 - Single lamp, Black housing (PC terminals) 8 - Twin lamp, Black housing (PC terminals) CIRCUITRY 03 - 1C 06 - 2C 09 - 3C 12 - 4C 23 - 1C (8A) 26 - 2C (8A) 29 - 3C (8A) 32 - 4C (8A) ACTION 2 - Momentary 7 - Push-Lock/ PushRelease 9 - Momentary Silent* PUSHBUTTON COLOR 01 - Red 03 - Green 04 - Blue 05 - White 08 - Yellow 12 - Clear 13 - Amber * Special order only. Contact Switchcraft. OPTIONS Pushbutton/indicator screens, color filter snap-inserts, mounting barriers and lighted dividers can be specified separately for substitution/replacement; order from tables. Also, engraving of legends is available; contact Switchcraft. SCHEMATIC RECOMMENDED PC BOARD LAYOUT (Component Side) DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 SWITCHES SERIES PL 280 SWITCHES PUSH-LITE (R) SWITCHES - OUTLINE DIMENSIONS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information PUSH-LITE(R) SWITCHES AND INDICATORS (continued) OUTLINE DIMENSIONS SWITCHES PUSH-LITE SWITCHES WITH SOLDER LUGS PUSH-LITE SWITCHES WITH PC TERMINALS DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery FAX: 773 792-2129 (R) SWITCHES PUSH-LITE SWITCHES - OUTLINE DIMENSIONS 281 * Please visit the product pages on our website for the most up-to-date product information PUSH-LITE(R) SWITCHES AND INDICATORS (continued) OUTLINE DIMENSIONS SWITCH AND INDICATOR MOUNTING WITH BARRIERS (See Note) SWITCHES SWITCH AND INDICATOR MOUNTING WITH BARRIERS (SEE NOTE) NOTE: PANEL OPENINGS FORM MULTIPLE ROW SWITCH MOUNTING Leave .109" (2.77 mm) minimum width strip between panel-cutouts to assure secure mechanical mounting of adjacent clamp mounting brackets. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 282 SWITCHES SLIDE SWITCHES PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information SLIDE SWITCHES SWITCHES DESIGN FEATURES Switchcraft slide switches are completely field tested and proven in electrical/electronic equipment applications. They are among the highest-quality, lowest-cost slide switches available to "cost-to-quality ratio" conscious engineers. Precision slide switches are designed and constructed to meet or exceed industry standards for reliability, electrical capacity and life characteristics. Switchcraft's slide action switches are ideal for use in critical military and industrial applications such as: instrumentation, test and ground support equipment, computers, control devices. Their attractive styling will enhance the appearance of modern home entertainment equipment. UL AND CSA SWITCHES All slide switches in this catalog with part number suffix "E" are stamped with both UL and CSA marks. Other standard switches are UL recognized (except as noted) and are stamped with the mark. SPECIAL ORDER SWITCHES FOR CSA APPLICATIONS The following series of switches (solder lug type) must be assembled with a fishpaper or phenolic solder guard to be CSA certified and stamped. Available on special order only. Series 46000R, 47000R, 46313R, 49000L, 50000L, Solder guards are not required on these switch series with PC terminals. However, they can only be supplied with CSA stamp on special order. Solder guards are not required on UL only versions. Contact Switchcraft for details. SWITCH SERIES IDENTIFICATION Series 46000 47000 49000 50000 56200, C56200 56300, C56300 C63000 EPS1, EPS2 EPS3, EPS4 TERMINALS Name General Purpose Slide Switches Tandem Slide Switches General Purpose Slide Switches General Purpose Slide Switches "Tini-Slide" Slide Switches "Tini-Slide" Slide Switches Miniature Slide Switches European Line Voltage Selector Switches Series 46000E 46000R 47000E 47000R 49000 50000 56000, C56000 62000, C62000 C63000 EPS1, EPS2 EPS3, EPS4 Silver-plated terminals are standard; gold-plated terminals are available on special order. Printed circuit terminals in varying lengths from ("A" dimension) .078" (1.98 mm) to 1.25" (31.75 mm) are available on special order. Reference "A" on all switch drawings indicates length of PC ter minals. See illustration and notes below for selection of terminals. Number of Positions 2, 3 2; 2 gang 3 2 2 3 4 2 Description Note 1 Notes 1, 3 Note 1 Notes 1, 3 Note 1 Notes 1, 3 See page 288 See page 290 See page 290 See page 291 NOTES: 1. PC terminal "A" dimension is: Standard - .078" (1.98) Special - .109" (2.77), .141" (3.58), .160" (4.06), .180" (4.57), .203" (5.16), .234" (5.94), .266" (6.76), .313" (7.95), .391" (9.93), .400" (10.16), .438" (11.12), .484" (12.29), .609" (15.47), .688" (17.48), .719" (18.26), .813" (20.65), .969" (24.61), 1.25" (31.75) 2. .078" (1.98) "A" dimension is not recommended for momentary switches unless clearance hole for return spring is provided in PC board. 3. Accepts up to #14 AWG wire. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery SWITCHES SLIDE SWITCHES FAX: 773 792-2129 283 * Please visit the product pages on our website for the most up-to-date product information SLIDE SWITCHES (continued) DESIGN FEATURES (continued) SWITCHING PART NUMBER SUFFIX LETTERS Letter Description Special pushbutton type. Depressing (rather than sliding) pushbutton operates the switch. Tandem switch with 2 knobs; knobs are internally (mechanically) coupled. 3-position switch having internal dust shield. Molded terminal board. Flush actuator. Screwdriver slotted. All series except 47000 series marked standard as "115/230." Other markings available as special order. Call Switchcraft for details. Locking action. Momentary (non-lock) action. Switch has external plunger. Current ratings up to 3A, 125V AC. Phenolic terminal board. Shorting type contacts, make-before-break. 3-position switches only. One side of neutral has locking action; the other side has momentary action. B C D E F L M P R S T BASIC SCHEMATIC CHART Standard arrangement is "Break" before "Make" (non-shorting). "Make" before "Break" (shorting) is available on special order in Series 46000R, 47000R, 49000 and 50000. BASIC SCHEMATIC CHART * * * * Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 .750 (19.05) .719 (18.26) * .563 (14.3) * * Standard, Special order 1. Flush screwdriver actuator is standard on numbers 46206LFE, 46206LFR, 46256LFE, 46256LFR and 47227LFR. 2. Numbers 62206L and C62206L have side knob actuator (rather than top knob) standard. 3. EPS switches not available with raised knobs. DIMENSIONS ARE FOR REFERENCE ONLY .594 (15.09) .531 (13.49) .487 (12.37) .469 (11.91) * *(2) .453 (11.51) .440 (11.18) .500 (12.7) .406 (10.31) * .328 (8.33) .315 (8) .313 (7.95) .302 (7.67) .203 (5.16) .200 (5.08) .188 (4.78) .187 (4.75) .15 (3.81) .156 (3.96) .375 (9.52) .344 (8.74) .250 (6.35) .219 (5.56) .137 (3.48) .125 (3.18) .112 (2.84) .100 (2.54) .094 (2.39) Series 46000E * 46000R (1) 46300R 47000 *(1) 49000 50000 56200 56300 62000 (2) C63000 EPS (3) * .087 (2.21) .063 (1.6) KNOB HEIGHTS Inches (mm) Flush KNOBS SWITCHES "Double-wipe" slide switches incorporate special "Sliders" to assure wiping action of terminals. This exclusive double wiping action reduces the possibility of oxidation or increased contact resistance. These longer lasting, self-cleaning sliders provide a switch with greater dependability. The "Sliders", which are formed with precision dies, are U-shaped to give bifurcated contact reliability. "Sliders" are made from a special copper alloy, plated, which assures uniform tensile strength over the entire life of the switch. Switch terminals are copper alloy, plated. Plating completely encloses the contact area in a silver jacket for positive and continuous electrical operation. A tarnish preventive lubricant coating is applied to the sliders and terminals. NOTE: "double-wipe" action on all switches except Series 62000 and 46256LFR. 284 SWITCHES GENERAL PURPOSE SLIDE SWITCHES - SERIES 46000 - 2 POSITION PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information GENERAL PURPOSE SLIDE SWITCHES 46206LR 46206LFR SERIES 46200E, 46200R - 2 POSITION PART NUMBERS SWITCHES SPECIFICATIONS Contact Ratings: 0.5A DC and 3A AC, 125V non-inductive. (Also 1.5A, 250V non-inductive for Series 46000E only). Numbers 46206LFR and 46256LFR are not designed to switch more than 125V, and must be set to desired position before power is applied to equipment, appliance, etc. Listings: UL recognized and CSA certified. Series 46000R switches are CSA marked on special order only. Ref. UL card E40668 and CSA File 28260. Housing: Steel, plated. Knob: Black thermoplastic. Terminals and Slider Contacts: Copper alloy, plated. Insulation: Series 46000E: Thermoplastic. Series 46000R: Rigid plastic. Temperature Range: -4F to +158F (-20C to +70C). Dielectric Strength: 1 kV rms @ sea level. Insulation Resistance: 1 k M minimum. SPECIAL ORDER FEATURES 1. .344" (8.74 mm) high knobs are standard; other heights available. See chart on page 283. 2. #6-32 and #4-40 tapped flanges for mounting available (except 46204MBR and 46206MP). 3. P.C. terminals. 4. Plunger length on 46206MP - Other lengths from .125" (3.18 mm) to 1.844" (46.84 mm) long. 5. Series 46000R switches are CSA marked on special order only. See page 282. Series 46200E 46201ME 46202LE 46202ME 46203LE 46203LSE 46203ME 46204LE 46204ME 46206LE 46206LFE 46206LSE 46206ME 46256LFE - Series 46200R 46201MR 46202LR 46202MR 46203LR 46203LSR 46203MR 46204LR 46204MR 46206LR 46206LFR 46206LSR 46206MR 46206MP 46256LFR C46203LR** C46204MR** C46206LR** C46206LFR** Description SPST NO, Momentary SPST, Locking SPST NC, Momentary SPDT, Locking SPDT, Locking SPDT, Momentary DPST, Locking DPST NO, Momentary DPDT, Locking DPDT, Locking (1) DPDT, Locking DPDT, Momentary DPDT, Momentary* DPDT, Locking (1) (2) SPDT , Locking DPST NO, Momentary DPDT, Locking DPDT, Locking (1) Schematic* I II II III III Shorting III 2-I 2-I 2-III 2-III 2-III Shorting 2-III 2-III V III 2-I 2-III 2-III * Contacts are non-shorting, except as noted. ** "C" prefix specifies .078 inch (1.98) PC terminals, no mounting ears. (1) Recommended for power selection, 115-230 legend, screwdriver slotted actuator minimizes tampering. (2) Shorting bars installed. Special order only; contact Switchcraft 46206MP 46206LR 46206LE 46256LFE DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com 46206LFR Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery SWITCHES GENERAL PURPOSE SLIDE SWITCHES - SERIES 46000 - 3 POSITION FAX: 773 792-2129 285 * Please visit the product pages on our website for the most up-to-date product information GENERAL PURPOSE SLIDE SWITCHES (continued) SERIES 46300R - 3-POSITION Three-position switches offer locking-locking, momentarymomentary and locking-momentary action for talk-listen applications. All switches have positive center detent and shutter type dust cover to prevent dirt and dust from contaminating switch contacts. SPECIFICATIONS SWITCHES Contact Ratings: 0.5A DC and 3A AC, 125V non-inductive. Listings: UL recognized, card E40688 CSA certified (marked) switches available on special order only. See page 282. Housing: Steel, plated. Detent Spring: Music wire. Shim: Black vulcanized fiber. Knob: Black thermoplastic. Terminals & Slider Contacts: Copper alloy, silver-plated. Insulation: Phenolic. Temperature Range: -4F to +158F (-20C to +70C). Dielectric Strength: 1 kV rms @ sea level. Insulation Resistance: 1 k M minimum. Series 46300R SPECIAL ORDER FEATURES: 1. .344" (8.74 mm) high knobs are standard; other heights available. See chart on page 283. 2. Series 46000R switches are CSA marked on special order only. See page 282. PART NUMBERS Action Positions* Part** Number 46311LDR 46311MDR 46311TDR 46313LDR 46313MDR 46313TDR Circuitry SPTT SPTT SPTT DPTT DPTT DPTT #1 L M L L M L Center L L L L L L #2 L M M L M M Schematic VI VI VI 2-VI 2-VI 2-VI Special order only; contact Switchcraft for price and delivery. * L - Locking; M - Momentary. ** "C" prefix specifies .078" (1.98) PC terminals, no mounting ears. SOLDER GUARDS Insulating Solder Guards, P-2370 (2-position); and P-2633 (3-position); slip over solder lug terminals and prevent solder splashes from entering interior (contact area) of switch. Made of fishpaper .01" (.25 mm) thick, Solder Guard slips over terminals quickly and easily. Precision punched slots lock onto terminals, and rectangular shape conforms with dimension of switch terminal board. Minimizes costly production line rework. Solder Guards can be used on: * General Purpose, Series 46000R * Tandem, Series 47000R. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 286 SWITCHES GENERAL PURPOSE SLIDE SWITCHES - TANDEM SERIES 4700 PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information SWITCHES GENERAL PURPOSE SWITCHES - TANDEM 47206LCE 47206LR 47227LFR SERIES 47200E, 47200R - 2 POSITION Space saving, two-gang slide switches are contained in one housing. Switching is locking type with non-shorting contacts. SPECIAL ORDER FEATURES 1. .344" (8.74 mm) high knobs or flush knobs are standard, depending on switch selected; other heights available. See chart on page 283. 2. Series 47000R switches are CSA marked on special order only. See page 282. SPECIFICATIONS Contact Ratings: 0.5A DC and 3A AC, 125V non-inductive, (Also 1.5A, 250V non-inductive for Series 47000E only.) 47227LFR switches are not designed to switch more than 125V, and must be set to desired position before power is applied to equipment or appliance. Listings: UL recognized, card E40668, and CSA certified (card 28260). Series 47000R switches are CSA certified on special order only. See page 282. Housing: Steel, plated. Knob: Black thermoplastic. Terminals and Slider Contacts: Copper alloy, silver-plated. Insulation: Series 47000E - Thermoplastic. Series 47000R - Rigid plastic. Temperature Range: -4F to +158F (-20C to +70C). Dielectric Strength: 1 kV rms @ sea level. Insulation Resistance: 1 k M minimum. PART NUMBERS Series 47200E 47202LE 47203LE 47204LE 47204LCE 47206LE 47206LCE - Series 47200R 47202LR 47203LR 47204LR 47204LCR 47206LR 47206LCR 47215LR 47215LCR 47217LR 47217LCR 47221LR 47221LCR 47227LFE 47227LFR Description SPST - SPST SPDT - SPDT DPST - DPST DPST - DPST DPDT - DPDT DPDT - DPDT SPST - SPDT SPST - SPDT SPST - DPST SPST - DPST SPDT - DPST SPDT - DPST DPDT - DPDT DPDT - DPDT Schematic II II III III 2-I 2-I 2-I 2-I 2-III 2-III 2-III 2-III II III II III II 2-II II 2-II III 2-II III 2-II 2-V 2-V NOTE: Series 47200E and 47200R - All switches have two independent knobs, except: * 47204LE, 47204LCR, 47206LCE and 47206LCR have one knob and one flush actuator. * 47227LFE and 47227LFR have internal mechanical coupling and two flush, slotted screwdriver actuators. Special order only; contact Switchcraft 47206LR 47206LCE 47227LFR DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery SWITCHES FAX: 773 792-2129 GENERAL PURPOSE SLIDE SWITCHES -SERIES 49000 AND 50000 287 * Please visit the product pages on our website for the most up-to-date product information GENERAL PURPOSE SLIDE SWITCHES (continued) SERIES 49300 - 3 POSITION Large, heavy duty, three and four pole slide switches. Standard mounting clearance is .141" (3.58 mm). Series 49300L, non-shorting contacts; Series 49300LS, shorting contacts. SPECIFICATIONS SPECIAL ORDER FEATURES 1. .5" (12.7 mm) high knobs are standard; other heights available. See chart on page 283. 2. #4-40 extruded and tapped mounting holes available. 3. Series 49300L switches are CSA marked on special order only. See page 282. 49331L PART NUMBERS Part Number 49309L 49309LS 49329L 49329LS 49312L 49312LS 49331L 49331LS UL & CSA Listing Yes No Yes No Yes No Yes No Description 3-PDT, Locking* 3-PDT, Locking* 3-PTT, Locking 3-PTT, Locking 4-PDT, Locking* 4-PDT, Locking* 4-PTT, Locking 4-PTT, Locking Schematic 3-VII 3-VII 3 -VI 3 -VI 4-VII 4-VII 4 -VI 4 -VI * 3rd position is off. Special order only; contact Switchcraft. SERIES 50200 - 2 POSITION A larger 2 position "double wipe" slide switch offering three and four poles of switching and locking or momentary action. Series 50200L and M, non-shorting; Series 50200LS and MS, with shorting contacts. SPECIFICATIONS Contact Ratings: 0.5A DC and 3A AC, 125V non-inductive. Listings: UL recognized (card E40668); CSA certified (card 28260). Series 50200L switches are CSA marked on special order only. See page 282. Housing: Steel, plated. Detent Shim: Copper alloy. Knob: Black thermosetting plastic. Terminals and Slider Contacts: Copper alloy, plated. Insulation: Rigid plastic. Temperature Range: -4F to +158F (-20C to +70C). Dielectric Strength: 1 kV rms @ sea level. Insulation Resistance: 1 k M minimum. SPECIAL ORDER FEATURES 1. .344" (8.74 mm) high knobs are standard; other heights available. See chart on page 283. 2. 50212LF available with flush, screwdriver slotted actuator and has 4 PDT locking action. 3. Extruded and tapped 4-40 or 6-32 holes available. 4. Series 50200L switches are CSA marked on special order only. See page 282. 50209L PART NUMBERS Part Number 50207L 50207M 50208L 50209L 50209LS 50209M 50209MS 50212L 50212LS Description 3PST - Locking 3PST, N.O. Momentary 4PST, Locking 3PDT, Locking 3-III 3PDT, Momentary 3-II 4PDT, Locking 4-III Special order only; contact Switchcraft. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 Schematic 3-I 3-I 4-I SWITCHES Contact Ratings: 0.5A DC and 3A AC, 125V non-inductive. Listings: UL recognized (card E40668); CSA certified (marked) switches available on special order only. See page 282. Housing: Steel, plated. Detent Shim: Copper alloy. Knob: Black thermosetting plastic. Terminals and Slider Contacts: Copper alloy, silver-plated. Insulation: Rigid plastic. Temperature Range: -4F to +158F (-20C to +70C). Dielectric Strength: 1 kV rms @ sea level. Insulation Resistance: 1 k M minimum. 288 SWITCHES MINIATURE SLIDE SWITCHES - SERIES 56200 AND C56200 PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information SWITCHES MINIATURE SLIDE SWITCHES 56206L1 SPECIAL ORDER C56206L2 C56206L2 SERIES 56200, C56200 - 2 POSITION SPECIAL ORDER FEATURES "Tini-Slide" slide switches have Exclusive SNAP SLIDE lifting and wiping action. This unique, positive action combines the best features of "snap" and "slide" movements into the design of a superior switch. Pitting, burning and contamination are minimized. Contacts lift through an air gap, drop on stationary contacts, and slide, wiping themselves clean. Subminiature size is ideal where useable space is at a premium. 1. .2" (5.08 mm) high knobs are standard; other heights available on special order. See page 283. 2. Red and white knobs available. 3. Mounting flanges with .1" (2.54 mm) diameter holes on C56206L1 or C56206L2. Flange holes tapped #4-40 on 56206L1 or 56206L2 (where production quantities warrant). 4. UL stamped on special order. SPECIFICATIONS Contact Ratings: 0.5A, 125V AC or DC, non-inductive. Minimum life at rated load 6000 cycles. Resistance after 6000 cycles at rated load is 50 milliohms maximum. Terminals: PC Type - silver-plated. Each terminal has standoff shoulder for stable mounting and space for board clearance. Mounting: Flange, (56206L1 and 56206L2) - .1" (2.54 mm) holes for screw or mounting rivet. PC - Direct mounting to PC boards up to .093" (2.36 mm) thick. Knob: Molded thermoplastic (UL 94V-1). Terminal Board: Molded thermoplastic (UL 94V-0). Terminals: Copper alloy, silver-plated. Contact Sliders: Copper alloy. Temperature Range: -4F to +158F (-20C to +70C). Dielectric Strength: 1 kV rms @ sea level. Insulation Resistance: 1 k M minimum. PART NUMBERS Part Number 56206L1 56206L2 C56206L1 C56206L2 Dimension "B" Inch (mm) .573 (14.55) .352 (8.94) Description DPDT, Locking DPDT, Locking DPDT, Locking DPDT, Locking Schematic 2-III 2-III 2-III 2-III C56206L1 & 2 56206L2 56206L1 RECOMMENDED PC BOARD LAYOUT (Component Side) DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery SWITCHES MINIATURE SLIDE SWITCHES - SERIES 56300 AND C56300 FAX: 773 792-2129 289 * Please visit the product pages on our website for the most up-to-date product information MINIATURE SLIDE SWITCHES (continued) C56313L1 56313L2 SERIES 56300,C56300 - 3 POSITION Series 56300 "Tini-Slide" switches provide ultra-reliable 3-position switching. They afford maximum space savings in military, industrial and consumer applications, such as instrumentation, test and ground support equipment, appliances, computers, and control devices. SPECIFICATIONS Contact Ratings: 0.5A, 125V AC or DC, non-inductive. Minimum switch life is 6000 cycles. Resistance after 6000 cycles at rated load is 50 milliohms maximum. Terminals: Solder Lugs - 56313L1 with wrap around notch; 56313L2 with solder lug. PC - .585" (14.68 mm) "B" dimension and .364" (9.24 mm) "B" dimension. Mounting: Mounting ears for mounting to chassis of panels with screws or rivets (not supplied). Switches with PC terminals have stand-off shoulders for solid PC mount. Knob: Molded thermoplastic (UL 94HB). Terminal Board: Molded thermoplastic (UL 94V-0). Terminals: Copper alloy, silver-plated. Contact Sliders: Copper alloy. Temperature Range: -4F to +158F (-20C to +70C). SWITCHES 56313L1 C56313L2 Dielectric Strength: 1 kV rms @ sea level. Insulation Resistance: 1 k M minimum. SPECIAL ORDER FEATURES 1. .187" (4.75 mm) high knob is standard; Other heights available on special order. See page 283. 2. Red and white knobs available. 3. Two mounting variations: a. Tapped #4-40 holes on mounting ears for machine screws. b. Mounting ears with .1" (2.54 mm) diameter holes on switches with PC terminals. PART NUMBERS Part Number 56313L1 56313L2 C56313L1 C56313L2 Dimension "B" Inch (mm) .585(14.85) .364 (9.24) Description DPTT, Locking DPTT, Locking DPTT, Locking DPTT, Locking Schematic 2-VI 2-VI 2-VI 2-VI 56313L1 & L2 56313L1 56313L2 RECOMMENDED PC BOARD LAYOUT (Component Side) DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 290 SWITCHES MINIATURE SLIDE SWITCHES PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information (R) SIDE-SLIDE /MINIATURE SLIDE SWITCHES SERIES 62200 - 2 POSITION 2-position locking action with side knob actuator. Side knob provides low profile, saving space on PC boards. SWITCHES SPECIFICATIONS 62206L RECOMMENDED PC BOARD LAYOUT (Component Side) Contact Ratings: 0.5A, 125V AC or DC. PC Terminals: Copper alloy, silver plated. Housing: Steel, plated. Knob: Molded thermoplastic. Terminal Board: Rigid plastic. Sliders: Copper alloy, plated. Dielectric Strength: 1000 V rms. Insulation Resistance: 1 k M minimum. SPECIAL ORDER FEATURES 1. Various knob heights available on special order. 2. Various lengths available on special order. PART NUMBERS Part Number 62206L C62206L Description DPDT, with mounting ears, Locking DPDT, without mounting ears, Locking Schematic 2-III 2-III Special order only; contact Switchcraft. MINIATURE SLIDE SWITCHES SERIES C63200 - 2 POSITION, 4 POLE C63200 switches designed for applications, such as: instrumentation, test and ground support equipment, computers, data communications and medical equipment. PC mounting on standard industry .100" (2.54 mm) x .200" (5.08 mm) centers. Mounts on PC boards up to .093" (2.36 mm) thick. Molded black thermoplastic knobs. Terminals are copper alloy, goldplated on contact area, tinned on terminal end. Part Number Action Switching Ratings 300mA C63212L Locking 4PDT max. 30V AC Schematic 4-III Terminals Copper alloy, gold-plated on contact area, tinned on terminal end RECOMMENDED PC BOARD LAYOUT (Component Side) DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery SWITCHES EUROPEAN LINE VOLTAGE SELECTOR SWITCHES FAX: 773 792-2129 291 * Please visit the product pages on our website for the most up-to-date product information EUROPEAN LINE VOLTAGE SELECTOR SWITCHES RED ACTUATOR RED ACTUATOR SWITCHES EPS1PC3 EPS2PC2 SERIES EPS1, EPS2, EPS3, EPS4 - 2 POSITION European Power Selector Switches are designed for quick, easy programming/selection of 115V-230V primary power. These switches provide OEM designers with an excellent selection of PC and solder lug terminals and ratings up to 10A, 125V AC rating for electrical/electronic equipment and systems headed for the INTERNATIONAL marketplace. HOUSING AND ACTUATOR Switches have positive, double detents for "sure" locking into position. Screwdriver slot actuator virtually eliminates the possibility of accidental operation and minimizes tampering. Molded-in legends are: 115-230V. Terminals are staked into housing. SPECIFICATIONS Contact Ratings: EPS1, EPS2 - 2A, 250V AC and 4A, 125V AC. EPS3, EPS4 - UL and CSA - 10.1A, 125V; 5A, 250V. VDE - 10A, 250V. Listings: UL and CSA recognized, UL card E40668; CSAcard 28260. 2A, 250V AC is VDE listed, VDE #13707 (for European applications). Designed to conform to requirements of CEE (International Commission on Rules for the Approval of Electrical Equipment, Publication 24) and the IEC (International Electrotechnical Commission). Housing: Molded black glass-reinforced plastic. Actuator and Cover: Molded thermoplastic. Terminals: Copper alloy, silver-plated. Slider Contacts: EPS1, EPS2 - Bi-Metal, silver on copper alloy. EPS3, EPS4 - Copper alloy with silver cadmium oxide inlay. Temperature Range: -4F to +158F (-20C to +70C). Dielectric Strength: 2kV rms @ sea level. Insulation Resistance: 1 k M minimum. SPECIAL ORDER FEATURES Series EPS actuators having legends other than 115V and 230V are available on special order. NOTE: Contact Switchcraft for details. EPS3SL1 EPS4PC3 PART NUMBERS Series EPS1 Part Number EPS1PC1 EPS1PC2 EPS1PC3 EPS1SL1 Dimension "B" Inch (mm) .681 (17.297) .719 (18.263) - Schematic 2-III 2-III 2-III 2-III Description Straight PC Straight PC Right-Angle PC Dimension "B" Inch (mm) .730 (18.542) .768 (19.507) - Schematic 2-III 2-III 2-III Terminals Straight PC Straight PC Right-Angle PC Solder Lugs Dimension "B" Inch (mm) .681 (17.297) .719 (18.263) - Schematic 2-III 2-III 2-III 2-III Description Straight PC Straight PC Right-Angle PC Dimension "B" Inch (mm) .730 (18.542) .768 (19.507) - Schematic 2-III 2-III 2-III Terminals Straight PC Straight PC Right-Angle PC Solder Lugs Special order only; contact Switchcraft. Series EPS2 Part Number EPS2PC1 EPS2PC2 EPS2PC3 Series EPS3 Part Number EPS3PC1 EPS3PC2 EPS3PC3 EPS3SL1 Series EPS4 Part Number EPS4PC1 EPS4PC2 EPS4PC3 DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 292 SWITCHES EUROPEAN LINE VOLTAGE SELECTOR SWITCHES PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information EUROPEAN LINE VOLTAGE SELECTOR SWITCHES (continued) EPS1PC3 - Long, right-angle PC terminals and flanges for combined mounting to PC board and panel/chassis. EUROPEAN LINE VOLTAGE SELECTOR SWITCH EPS1PC1 - Short, PC terminals and flanges for combined mounting to PC board and panel/chassis. PC MOUNT SWITCHES PANEL/CHASSIS MOUNT EPS2PC2 - Long, PC terminals for direct mounting to PC board only. EPS2PC3 - Long, right-angle PC terminals for combined PC terminating and mounting. EPS1SL1 - Solder lug terminals and mounting flanges for panel/chassis mount. PANEL OPENING DATA SERIES EPS1 EPS1PC3 EPS2PC1 & PC2 SERIES EPS2 RECOMMENDED PC BOARD LAYOUT (Component Side) EPS1PC1 & PC2 EPS2PC3 EPS1SL1 DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery SWITCHES EUROPEAN LINE VOLTAGE SELECTOR SWITCHES FAX: 773 792-2129 293 * Please visit the product pages on our website for the most up-to-date product information EUROPEAN LINE VOLTAGE SELECTOR SWITCHES (continued) SWITCHES RECOMMENDED PC BOARD LAYOUT (Component Side) EPS3PC1 & EPS3PC2 EPS4PC3 PANEL OPENING DATA EPS3SL1 SERIES EPS4 EPS3PC3 EPS4PC1 & EPS4PC2 DIMENSIONS ARE FOR REFERENCE ONLY SERIES EPS3 Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 294 SWITCHES LEVER SWITCHES - DESIGN FEATURES PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information LEVER SWITCHES DESIGN FEATURES SWITCHES High quality, field-proven Switchcraft(R) lever switches are available in a wide selection of illuminated and non-illuminated versions, 2- and 3-position, locking and non-locking functions can be provided. Switchcraft illuminated lever switches feature choice of colors, wide selection of switching circuits, single lamp illumination and ease of mounting and lamp replacement. All switches utilize nickel silver springs without "form" at point of flexing to insure long spring life. The springs are assembled into a conventional stack assembly, insulated from each other by phenolic spacers with plastic tubing press-fit through each stack, insuring correct alignment of contacts and providing high insulation resistance. To avoid ordering special switches it is possible to use a larger standard circuit, providing the circuit fulfills your requirements. Circuit Form K is widely used in talk-listen (intercom) function applications. In normal position (neutral), switch does not contact upper or lower contact spring. During typical operation, lever is held in upper (momentary) position while speaking. Releasing lever allows switch to return to neutral. For listening, lever is moved to down (locking) position. Lever is manually returned to neutral when finished. SCHEMATIC DIAGRAM FORM K APPLICATIONS Various front panel switching applications on computers, telecommunications systems, industrial control equipment, intercoms, ground support systems, medical electronics, scientific instruments, broadcast consoles and test instrumentation. ORDERING STANDARD SWITCHES Order lever switches by part number from pages 295 through 298. LAMP DATA Lever-Lite(R) switches use T-1 3/4 flange base lamps which are available from commercial sources. CONTACTS Below are listed the basic contacts available on switches in this catalog: 1. Fine silver contacts rated at 2A, 200W (maximum) AC non-inductive load. 2. Welded cross bar silver contacts rated at 3A, 300W (maximum) AC non-inductive load. 3. Welded cross bar palladium contacts rated at 2A, 200W (maximum) AC non-inductive load. 4. Welded cross bar gold alloy contacts rated at up to 1A, 100W (maximum) AC non-inductive load. (Dry circuit applications.) Lever Switches Should you desire a special version of any Switchcraft(R) lever switch not shown here, we require the following information: 1. Switch series. 2. Number of positions. 3. Mechanical action (locking, non-locking, etc.). 4. Contact configuration for each position. 5. Type of contact material. 6. Color sequence (Lever-Lite III). BASIC CONTACT FORMS UL RECOGNIZED LEVER SWITCHES Below are the basic contact forms available standard on all Switchcraft Lever Switches. Specify circuits needed by referring to the letter identification and respective location on frame. See dimensional drawings for stack switch location. Seven series of Switchcraft lever switches are UL recognized. These switches are available on special order to fulfill your switching requirements which specifically require UL listed switching devices. 1. Series 12000 2. Series 41000 A B C D E F ORDERING SPECIAL SWITCHES NOTE: Refer to switch series in this catalog for full mechanical specifications and additional standard and special features. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery SWITCHES (R) LEVER-LITE ILLUMINATED LEVER SWITCHES - SERIES 84000 FAX: 773 792-2129 295 * Please visit the product pages on our website for the most up-to-date product information LEVER SWITCHES (continued) LEVER-LITE(R) III SERIES 84000 - ILLUMINATED LEVER SWITCHES LAMPS Standard T 1-3/4" midget flange-base lamps (not supplied) are available in voltages up to 28V. SPECIAL ORDER FEATURES 1. Talk-Listen (Intercom) function. 2. Welded cross bar gold alloy for dry circuit and silver contacts are available. See page 294. ILLUMINATION A single internal lamp provides brilliant lever lighting in any color required. Standard factory installed color filters are provided as follows: Series 84000, Multi-Color Illumination 2-position - Amber (neutral position); green (down position). 3-position - Red (up position); amber (neutral position); green (down position). One-color (all positions) and non-illuminated switches can be specified on special order. Switchcraft will install filters for non-standard illumination requirements at nominal cost on special order. MOUNTING Grasp fingernail slots on opposite sides of escutcheon and snap out. Next, grasp lever and pull lever assembly free. Insert switch into panel hole. Turn two internal screws clockwise with screwdriver to securely mount switch to panel. RELAMPING/REPLACING COLOR FILTERS Lever-Lite III switches are designed for simplified lamp installation and replacement, and color filter changes or custom installation in the field or on the OEM production line. Lamps and filters may be changed at any time with ease and without dismounting switch from panel or disturbing wiring. Remove escutcheon and lever assembly. (see "MOUNTING" above) For relamping, pull lamp out of retainer with finger-tip. Replace lamp. For color filters, use fingernails or small screwdriver to remove. Gently lift (don't pry) up under edge of filter until it "pops" out. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 Replace lever assembly and "snap" escutcheon into place. Installation complete! Place new filter in position and press until it "snaps" in. Replace lever assembly and escutcheon. (see "MOUNTING" above) SWITCHES Lever-Lite(R) III illuminated lever switches are designed for front-of-panel mounting, relamping, terminating, color changes and removal. A minimum of time is required to install singly, in rows, or in matrix arrays to meet a wide variety of switching applications. 2- and 3-position types are available in non-locking functions. Mounts on .875" (22.22 mm) horizontal centers or 1.5" (38.1 mm) vertical centers. Talk-listen (intercom) function is also available. Illumination technique provides a different color for each lever position. 296 SWITCHES LEVER-LITE(R) ILLUMINATED LEVER SWITCHES - SERIES 84000 PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information LEVER SWITCHES (continued) SWITCHES LEVER-LITE(R) III SERIES 84000 - ILLUMINATED LEVER SWITCHES SPECIFYING LEVER-LITE(R) III SWITCHES 1. Basic Switch - Refer to Part Number table for ordering switches. For special switches, such as talk-listen (intercom) function, special circuit forms, or non-illuminated switches, contact factory for price and delivery. 2. Illumination - Supplied with standard color filters installed. Switchcraft will install other combinations at nominal extra cost. 3. Lamps - Lamps are not supplied with switches. SPECIFICATIONS Mounting/Retaining Clips and Covers: Steel, plated. Contact Ratings: Welded cross bar palladium contacts rated at 1A, 200W maximum AC non-inductive load are standard. Other contacts available. See "SPECIAL ORDER FEATURES" on page 295. Springs: Copper alloy, plated. Lamp Terminals: Copper alloy, plated. Lamp Socket: Zinc, plated. Terminals: Copper alloy, plated, straight solder lugs. Housing, Escutcheon, Knob, Actuator and Switching Stacks Insulation: Molded plastic. Temperature Range: -22F to 158F (-30C to +70C). Dielectric Strength: 1 kV DC. Leakage Resistance: 1,000 M or greater. K-131 COLOR FILTER KIT Kit is available for changing or replacing color filters to meet illumination requirements. Each kit contains 3 filters of each color: Amber, Blue, Green, Red, White and Yellow. SWITCHCRAFT PART NUMBER K-131 REPLACEMENT LEVERS Number G6083 (for locking lever) Number G6084 (for non-locking lever) PART NUMBERS THREE POSITION TWO POSITION Part Numbers Non-Locking 84206 84212 Part Numbers Locking 84206L 84212L Switching 2-C 4-C 84306 84312 84324 84306L 84312L 84324L Position 1 Position 2 1-C 1-C 2-C 2-C 4-C 4-C Special order only; contact Switchcraft. LEVER-LITE(R) SERIES 84000 PANEL OPENING .750" (19.05mm) x 1.375" (34.92mm) DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery SWITCHES (R) LEV-R SWITCHES - SERIES 12000 FAX: 773 792-2129 297 * Please visit the product pages on our website for the most up-to-date product information LEVER SWITCHES (CONTINUED) 12012 12014 12016 12017 SWITCHES 12013 12010 12011 12015 (R) LEV-R(R) SWITCH SERIES 12000 Electrical 12000 SERIES RA LEV-R SWITCHES Contact Ratings: Fine silver contacts rated at 3A, 300W maximum AC non-inductive load standard. Other contacts available Leakage Resistance: 1,000 M or greater Dielectric Strength: 250 VDC PANEL OPENING .469" (11.91mm) DIAMETER MAXIMUM PANEL THICKNESS .094" (2.39mm) Material Frame: Copper alloy, plated (3,000, 13,000); Steel, plated (12,000) Bushing and Shaft: Copper alloy, plated Springs: Copper alloy Knob: Black molded thermoplastic Mounting Hardware: Knurled copper alloy locknut T10711, supplied. P10531 hex locknut, special order Insulation: Rigid plastic spacers with plastic tubing through stack. Rigid plastic and/or thermoplastic lifters. Thermoplastic cam on actuator end 12000 SERIES STRAIGHT LEV-R SWITCHES PART NUMBERS TWO POSITION NON-LOCKING*+ THREE POSITION NON-LOCKING* Part Number Stack Hgt. "X" & "Y" (max.) Switching Part Number Stack Hgt. "X" & "Y" (max.) 12001 12002 12003 12003D 12004 12005 12006 12006D .719 (18.26) .688 (17.48) .750 (19.05) .813 (20.65) .906 (23.01) .875 (22.22) 1.000 (25.40) 1.063 (27.00) 1-A 1-B 1-C 1-D 2-A 2-B 2-C 2-D 12010 12011 12012 12013 12014 12015 12016 12017 12033 12034 12035 12036 12036D 12037 .703 (17.86) .703 (17.86) .766 (19.46) .703 (17.86) .703 (17.86) 1.078 (27.49) .703 (17.86) .703 (17.86) .719 (18.26) .813 (20.65) .750 (19.05) .875 (22.22) 1.000 (25.40) .875 (22.22) Switching Pos.1 Pos. 2 1-B 1-B 1-B 1-B 1-B 2-B 1-B 1-B 1-B 1-B 1-B 1-C 1-B 2-B 1-B 1-B 1-K 1-A 1-B 1-C 1-D 1-A 1-B 1-C 1-D 2-K INTERCOM SWITCHES Part Number 12033T 12037T Stack Height "X" &"Y" .719 (18.26) .875 (22.22) Switching 1-K 2-K * Add prefix "R" to part number if non-turn mounting is required. (Special order). + Add suffix "L" to part number if locking type is required. Special order only; contact Switchcraft. Knobs T12742 T12745 Black White T127410 P2912 Ivory Amber Knobs must be ordered separately. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 298 SWITCHES LT(R) SWITCH - SERIES 4100 PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information LEVER SWITCHES (CONTINUED) Frame: Steel, plated. Bushing and Actuator: Copper alloy, plated. Springs: Copper alloy. Contact Ratings: Welded cross bar palladium contacts rated at 2A, 200W maximum, AC non-inductive load are standard. See "SPECIAL ORDER FEATURES". Terminals: Tin dipped solder lugs. Mounting Hardware: Supplied with one copper alloy-plated hex locknut (P10531); and one non-turn washer (P10639). Insulation: Rigid plastic spacers with plastic tubing through the stack assembly. Lifters of thermoplastic. Lifter-Roller Assembly: Molded plastic. Knob: Supplied with a paddle style, screw-on black plastic knob. See "SPECIAL ORDER FEATURES". Temperature Range: -22F to 158F (-30C to +70C). Leakage Resistance: 1,000 M or greater. SWITCHES SERIES 41000 LT SWITCH SERIES 41000 (R) LT(R) SWITCH SPECIFICATIONS PANEL OPENING .469" (11.91mm) DIAMETER MAXIMUM PANEL THICKNESS .25" (6.35mm) LT(R) SWITCH SERIES 41000 MOLDED DUST COVERS Dust cover is an environment and electrical shield, protecting and improving appearance and increasing switch dependability. Covers enshroud complete switch, preventing build-up of dust, dirt, contamination. SPECIAL ORDER FEATURES 1. Talk-Listen (Intercom) function. 2. Fine silver and other alloys available for contacts. See page 294. 3. UL recognized switches. See page 294. LT(R) SWITCH PART NUMBERS 2 POSITION NON-LOCKING* Part Numbers MOLDED DUST COVER 41203 41206 41208 41212 P2362 (up to 4-C per side) Switching 1-C 2-C 4-A 4-C Stack Heights Dimension "X" max. .531 (13.49) .531 (13.49) .615 (15.62) .750 (19.05) 3 POSITION NON-LOCKING* P2360 (up to 2-C per side) 41306 41308 41312 41324 Position 1 1-C 2-A 2-C 4-C Position 2 Dim. "Y" Dim. "X" 1-C .531 (13.49) .531 (13.49) 2-A .500 (12.7) .500 (12.7) 2-C .531 (13.49) .531 (13.49) 4-C .750 (19.05) .750 (19.05) *Add suffix "L" to part number for locking type. To avoid ordering special switches, order a larger standard circuit, providing the circuit meets your requirements. Special order only; contact Switchcraft. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery SWITCHES GENERAL PURPOSE STACK SWITCHES FAX: 773 792-2129 299 * Please visit the product pages on our website for the most up-to-date product information GENERAL PURPOSE STACK SWITCHES GENERAL PURPOSE STACK SWITCHES (SPECIAL ORDER ONLY) STACK SWITCH COMPONENTS Switchcraft offers various stack switch components, such as contact springs, spacers, lifters, etc., in many lengths, thicknesses, mounting centers and other details. Switchcraft can assemble components into innumerable different stack switch assemblies. It is impossible to catalog every type of stack that has been manufactured. Stack switch assemblies can be designed to meet UL requirements, but only as part of equipment. .375" STACK SWITCHES .250" (6.35 MM) STACK SWITCHES Thousands of switching combinations are possible. Switch mounting centers are .375" (9.52 mm) (minimum) with .25" (6.35 mm) wide switch parts. Practical spring length is 2.625" (66.68 mm) (maximum). Contact Switchcraft for selection of contacts and ratings. Thousands of switching combinations are possible with slightly smaller parts. Mounting centers are .250" (6.35 mm) (minimum) with .188" (4.78 mm) wide parts. Practical spring length is 2.125" (53.98 mm) (maximum). Contact Switchcraft for selection of contacts and ratings. MINIATURE .188" (4.78MM) STACK SWITCHES TELEPHONE RELAY TYPE SWITCHES Many Tini-Stack(R) switching combinations are possible. Switch mounting centers are .188" (4.78 mm) (minimum). Practical spring length is 1.750" (44.45 mm) (maximum). Compact stack switches are particularly suitable for low activating force, such as in relay and magnetic operated devices. Contact Switchcraft for selection of contacts and ratings. SPECIFICATIONS SPECIFICATIONS Springs: Copper alloy, in most standard gauge thicknesses ranging from .006" (0.15 mm) to .016" (0.41 mm). Spacers: Rigid plastic, available in thickness of .015" (0.38 mm), .032" (0.81 mm) and .046" (1.17 mm). Contacts: Welded cross bar palladium rated at 2A, 200W AC non-inductive load. Gold alloy generally recommended for "dry" circuit applications. Tubing: Thermoplastic. Lifters: Thermoplastic. Mounting Hardware: Pressure plate, twin nut and screws: Steel, plated. Springs: Copper alloy, in thicknesses ranging from .006" (0.15 mm) to .012" (0.30 mm). Spacers: Rigid plastic is standard in thickness of .031" (.79 mm), .047" (1.19 mm) and .063" (1.60 mm). Contacts: Fine silver or welded cross bar palladium are standard. Palladium or gold alloy are generally recommended for "dry" circuit applications. Other contacts available for varied customer requirements on special order. Tubing: Thermoplastic. Lifters: Thermoplastic. Bracket: Steel, plated. Mounting Hardware: Pressure plate, twin nut and screws: Steel, plated. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 SWITCHES Complete general purpose stack switch assemblies are made from a pile-up of various actuator springs, contact springs and lifters. These stack switch assemblies can be used on manually operated control devices where switching is operated by cams, push-buttons and other similar mechanical devices. The stack switch assembly is made up of an actuator spring and various contact springs. These current carrying members are insulated from each other by phenolic spacers with plastic tubing press fitted through the stack; thereby insuring correct alignment of contacts and providing high insulation resistance when mounted. The types of General Purpose Stack Switch Components available are: * .375" (9.52 mm) mounting centers * .250" (6.35 mm) mounting centers * "Tini-Stack" Switches .188" (4.78 mm) mounting centers * Telephone Relay Type Switches .250" (6.25 mm) mounting centers 300 SWITCHES GENERAL PURPOSE STACK SWITCHES - COMPONENT SPECIFICATIONS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information SWITCHES GENERAL PURPOSE STACK SWITCHES (continued) STACK SWITCH COMPONENT SPECIFICATIONS HOW TO ORDER STACK SWITCHES 1. SPRINGS - Copper alloy in most standard gauge thicknesses of .006" (0.15 mm), .008" (0.20 mm), .010" (0.25 mm), .012" (0.30 mm), .016" (0.40 mm) and .020" (0.50 mm), a few designs can be made up to .031" (.079 mm) thick. All or any contact point hole can be provided; spring can be cut at any point. Careful consideration of the following suggestions will help specify the most economical and expeditious approach to your switching needs. On initial inquiry or order, supply the following information: 1. Simple sketch or drawing. See "Typical Stack Assembly" drawing. Give details checked that are available. 2. Current, voltage and type of switching load (resistive or inductive). 3. Frequency of operation; life requirements. 4. Details of actuator. 5. Maximum and minimum movement of actuator blade. 6. Any other important specifying details. It is recommended that data indicated above be forwarded to Switchcraft for comments and recommendations before finalizing your design. 2. BRACKETS - Standard brackets are detailed on drawing. Tools are flexible so that various lengths from same width stock can be provided. 3. LIFTERS OR PUSHERS - .125" (3.18 mm) and .188" (4.78 mm) diameter thermoplastic in various lengths staked into one of the contact point holds provides tandem action between blades or to serve as an actuator. 4. MOUNTING HARDWARE - Pressure plates (S1293 and S2300) twin nuts (S1008 and S1431) and screws available for mounting. 5. LEAF INSULATORS - Punched in same shape as springs in .015" (0.38 mm) thickness of fish paper or mylar. 6. SPACERS - Rigid plastic is standard in thicknesses of .015" (0.38 mm), .032" (0.81 mm), .051" (1.30 mm) and .062" (1.57 mm). Thickness of .093" (2.36 mm) is available for .375" (9.52 mm) mounting centers only. For longer surface creepage paths, use both large and standard sized spacers. High temperature insulation also available. 1. 6. 2. 7. 3. 8. 7. THERMOPLASTIC TUBING - .375" (9.52 mm) mounting centers pass #5 screw. .250" (6.35 mm) mounting centers pass #3 screw. .188" (4.78 mm) mounting centers pass #2 screw. 8. CAM FOLLOWERS - Two roller bracket designs (G1734 and G2298) available for springs .250" (6.35 mm) wide. Copper alloy standard. Can be furnished in various diameters and materials. Thermoplastic rollers also available. 9. CONTACTS - Welded cross bar contacts are commonly used for cost savings. However, riveted contacts are available. Size and material depend on circuit requirements (supply complete details). For low level audio circuits, we suggest gold alloy or palladium cross bar contacts. Springs can be bifurcated (two contacts per spring). 4. TYPICAL STACK ASSEMBLY 5. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com 9. Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery SWITCHES MULTIPLE STATION SWITCHES FAX: 773 792-2129 301 * Please visit the product pages on our website for the most up-to-date product information MULTIPLE STATION SWITCHES SERIES 65000 DW MULTI-SWITCH SERIES 66000, 67000 DW MULTI-SWITCH FEATURES Switches are designed to meet performance requirements of sophisticated equipment such as: analog and digital computers, analyzers, transmitters and receivers, intercoms, machine and process controls, ground support systems, scientific instruments and test measurement and instrumentation. STANDARD MECHANICAL FUNCTIONS INTERLOCK - actuating a button automatically restores to normal the button previously actuated. Lock-out feature, which prevents the mechanical operation of more than one button at a time, is standard on all interlock switches. NON-LOCK - each button has momentary action. No interaction between buttons. Lock-out available on special order only. ALL-LOCK - all buttons, except release, lock when depressed (accumulative lock). All buttons restored to normal by activating release button which has momentary action. PUSH-LOCK/PUSH-RELEASE - pushbutton locks when depressed and is released when again depressed. LOCK-UP - built-in, electrically operated solenoid locks all stations (in respective positions). Limited to operation of up to 12 stations only and energized from a remote position. Not available in push-lock/push-release. SPECIAL ORDER MECHANICAL FUNCTIONS and reprogramming of equipment. Momentary common release function - Permits one or more momentary common release stations on switch to facilitate special operating and release sequences. "Split-interlock" function - Two separate groups of inter-lock stations on the same frame offers exceptional design latitude and reduces production line time. GANGED ASSEMBLIES (Special Order) Multiple row switching (ganged assemblies) with interaction between rows are available on special order. Space-saving ganged assemblies reduce production line assembly, wiring and testing time. All features of single row switching, including all standard and special features, are available. Contact Switchcraft for specifying assistance. PUSHBUTTONS Illuminated and non-illuminated switches can be specified with standard or special pushbuttons. See coverage on individual series for information. LEGENDS Legends can be supplied on illuminated and non-illuminated pushbuttons. Contact Switchcraft. Mechanical functions on selected series can be intermixed on the same frame on special order only. Contact factory for details and availability. Multi-Switch switches have been designed to readily accommodate "special" functions at nominal cost. Special functions are described at right. Intermixed functions - the following combinations of standard functions intermixed on the same frame are available: * Interlock and Non-Lock * Interlock and Push-Lock/Push-Release * All-Lock and Non-Lock * All-Lock and Push-Lock/Push-Release * Push-Lock/Push-Release and Non-Lock Lock-out function - Refer to above description under "Interlock." Push-release cancelling function - Speeds programming DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 SWITCHES SERIES IBS 302 SWITCHES MULTIPLE-STATION SWITCHES PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information SWITCHES MULTIPLE-STATION SWITCHES (continued) SERIES 90000, 920000 TINI DW MULTI-SWITCH SERIES 37000, 38000 LITTEL(R) MULTI-SWITCH SERIES 35000 LITTEL(R) MULTI-SWITCH CHOOSING THE RIGHT MULTIPLE-STATION SWITCH Switch Series Mechanical Functions1 Stations (Maximum) Switching Per Station (Maximum) Contact Rating2 Lighting Accessories3 35000 ILO, N, A, PL/PR 18 6PDT 2A AC, 200W No C, G, M, P, S, PC/WW 36000 37000 6PDT ILO, N, A, PL/PR 18 4PDT 38000 65000 66000 No 2A AC, 200W 3PDT Yes ILO, N, A, PL/PR 18 4PDT 3A AC, 0.5A DC ILO, N, A, PL/PR 18 4PDT 3A AC, 0.5A DC 67000 90000 No No C, G, M, P, S, PC/WW, LWO C, G, M, S, PC/WW C, G, M, S, PC/WW Yes ILO, N, A 12 - ILO, A 18 - N, PL/PR 8PDT 0.5A 28V AC or DC No M I, N 12 2PDT .125A, 125 VAC or 28 VDC No P, M 92000 IBS Yes 1. I = interlock, ILO = interlock with lockout, N = non-lock (momentary), A = all-lock (special order), PL/PR = push-lock/push-release. 2. Non-inductive load. 3. C = optional switch contact, G = ganged assemblies, M = special/mixed functions, P = optional pushbuttons, S = solenoid release, PC/WW = PC and wire-wrapping terminals, LWO = lighting wiring options. ORDERING Order switches by part number in this section. For any optional or special order feature, contact Switchcraft. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery SWITCHES (R) LITTEL MULTI-SWITCH - SERIES 35000 FAX: 773 792-2129 303 * Please visit the product pages on our website for the most up-to-date product information MULTIPLE-STATION SWITCHES (continued) LITTEL(R) MULTI-SWITCH TYPICAL PANELS DIMENSIONS SERIES 35000 SERIES 35000 SWITCHES SERIES 35000 Specify 1 to 18 stations (non-illuminated) with a large selection of mechanical functions, choice of pushbuttons, and up to 6 poles of switching per station. Plungers are on .625" (15.88 mm) centers and are made from .050" (1.27 mm) x .187" (4.75 mm) steel. A square black pushbutton, A592, is supplied with each station. A wide variety of special mechanical functions, features and accessories are also available. ORDERING INFORMATION STANDARD SWITCHES Order by part number from tables. SPECIAL SWITCHES Many special mechanical functions, features and accessories are available. Contact Switchcraft. * Ganged Assemblies * Pushbuttons * Special Mechanical Functions * Legends * Switch Stacks * Accessories * PC and Wire-Wrapping Terminals PART NUMBERS/2-C PER STATION1 Interlock with Lock-Out 35021K206 35041K206 35061K206 35081K206 35101K206 35121K206 Non-Lock 35022206 35042206 35062206 35082206 35102206 35122206 Push-Lock/ Push-Release 35027206 35047206 35067206 35087206 35107206 35127206 Number of Stations2 2 4 6 8 10 12 PART NUMBERS/4-C PER STATION1 35021K212 35041K212 35061K212 35081K212 35101K212 35121K212 FIGURE A - PANEL CUTOUT FOR PLUNGER CLEARANCE ONLY 35022212 35042212 35062212 35082212 35102212 35122212 35027212 35047212 35067212 35087212 35107212 35127212 2 4 6 8 10 12 1. Switches with all-lock function are available on special order. Contact Switchcraft. 2. Odd number of stations (3, 5, 7, 9, 11) are available. Switches with 13 through 18 stations are also available. Contact Switchcraft. Special order only; Contact Switchcraft for price and delivery information. FIGURE B - PANEL CUTOUT FOR SERIES A590 PUSHBUTTON CLEARANCE ONLY DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 304 SWITCHES LITTEL(R) MULTI-SWITCH - SERIES 36000, 37000 & 38000 FEATURES PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information MULTIPLE-STATION SWITCHES (continued) LITTEL(R) MULTI-SWITCHES SWITCHES SERIES 36000, 37000, 38000 SERIES 36000 - NON-ILLUMINATED SERIES 37000 - SINGLE LAMP SERIES 36000 Identical to Series 37000, except non-illuminated. Pushbuttons match Series 37000 and 38000 Switching up to 6PDT. SERIES 37000 Same as Series 35000, but features large, rectangular face pushbuttons, illuminated by one lamp and having large legend area. Switching is up to 4PDT. Switch stations are on .625" (15.88 mm) centers, and depth behind panel is 2.313" (58.75 mm). Black pushbutton housings have white translucent inserts, white legend insert, two support inserts, and transparent display screen. Other pushbuttons and combinations are possible; see pages 316 and 317. On 2-C per station switches, each station includes two, 83P switch stacks and one H83P lighting stack, and one convenience lighting spring. Contact ratings: 2A, 200W maximum AC non-inductive load. On 4-C per station switches, each station has 4, 83P switch stacks, one H83P lighting stack, and one convenience lighting spring. "L" and "M" lighting arrangements can be effected by wiring directly to the H83P and H lighting stacks. Each switch station uses an industry standard T 1-3/4 lamp (not supplied). Special features such as ganged assemblies, solenoid release, and T-1 lamp adapter are available; contact Switchcraft. See pages 316 and 317 for special effects display screen and inserts. SERIES 38000 Similar to Series 37000, except features twin lamp illumination at each station for redundant or 2-color, split-face (alternate) lighting. SERIES 38000 - TWIN LAMPS 5PDT circuitry (1 pole is required for lighting lamps). two, T 1-3/4 lamps per station are used (lamps are not supplied). Ganged assemblies and solenoid releases are available; contact Switchcraft. See pages 316 and 317 for special effects display screens and inserts. LIGHTING Series 37000 and 38000 can be used in control systems where the light is either "ON", or "OFF" or permanently "ON". One or any combination of the three lighting arrangements listed below can be specified on a switch. NOTE: Standard switches ordered from tables can be wired for "L", "M" or "N" type lighting. TYPE "L" "M" "N" DESCRIPTION Pushbuttons light in the "IN" position. Pushbuttons light in the "OUT" position. Pushbuttons light in the "IN" and "OUT" positions. ORDERING STANDARD SWITCHES Order by part number from tables. SPECIAL SWITCHES Many special mechanical functions, features and accessories are available. Contact Switchcraft for special order items. * Ganged Assemblies * Special Mechanical Functions * Special Color Displays * Pushbuttons * Legends * Switch Stacks * Wiring Lighting Options * PC and Wire-wrapping Terminals * Accessories On 2-C per station switches, each station includes 3, H83P lighting switch stacks and 1 lighting spring. This provides up to 3PDT circuitry (1 pole is needed for lighting lamps; lamps not supplied). Contact ratings: 2A, 200W maximum AC non-inductive load. On 4-C per station switches, each station has three, H83P, two, 83P switching stacks and one lighting spring. This offers DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery SWITCHES (R) LITTEL MULTI-SWITCH - SERIES 36000, 37000, & 38000 FAX: 773 792-2129 305 * Please visit the product pages on our website for the most up-to-date product information MULTIPLE-STATION SWITCHES (continued) LITTEL(R) MULTI-SWITCHES SERIES 36000, 37000, 38000 (continued) SERIES 38000 PART NUMBERS / 2-C PER STATION1 SERIES 37000 PART NUMBERS / 2-C PER STATION1 Non-Lock 370221206 370421206 370621206 370821206 371021206 371221206 Push-Lock/ Push-Release 370271206 370471206 370671206 370871206 371071206 371271206 Number of Stations2 2 4 6 8 10 12 370221212 370421212 370621212 370821212 371021212 371221212 370271212 370471212 370671212 370871212 371071212 371271212 Non-Lock 380221206 380421206 380621206 380821206 381021206 381221206 Push-Lock/ Push-Release 380271206 380471206 380671206 380871206 381071206 381271206 Number of Stations2 2 4 6 8 10 12 PART NUMBERS / 4-C PER STATION1 PART NUMBERS / 4-C PER STATION1 37021K1212 37041K1212 37061K1212 37081K1212 37101K1212 37121K1212 Interlock with Lock-Out 38021K1206 38041K1206 38061K1206 38081K1206 38101K1206 38121K1206 2 4 6 8 10 12 1. Switches with all-lock function are available on special order. Contact Switchcraft. 2. Odd number of stations (3, 5, 7, 9, 11) are available. Switches with 13 through 18 stations also available. Contact Switchcraft. Special order only; Contact Switchcraft for price and delivery information. 38021K1212 38041K1212 38061K1212 38081K1212 38101K1212 38121K1212 380221212 380421212 380621212 380821212 381021212 381221212 380271212 380471212 380671212 380871212 381071212 381271212 2 4 6 8 10 12 1. Switches with all-lock function are available on special order. Contact Switchcraft. 2. Odd number of stations (3, 5, 7, 9, 11) are available. Switches with 13 through 18 stations also available. Contact Switchcraft. Special order only; Contact Switchcraft for price and delivery information. MATERIAL SPECIFICATIONS TYPICAL PANEL OPENING Frame: Steel, dry film lubricant. Plungers, Stack Switch Mounting Brackets and Screws: Steel, plated. Stack Switches: Stack switch springs are made of copper alloy. Solder lugs are hot tin-dipped. Insulation: Stack switches: rigid plastic spacers with plastic tubing through stack. Lifters: Thermoplastic. SERIES 37000, 38000 DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 SWITCHES Interlock with Lock-Out 37021K1206 37041K1206 37061K1206 37081K1206 37101K1206 37121K1206 306 SWITCHES LITTEL(R) MULTI-SWITCH - SPECIAL EFFECTS COLOR DISPLAY & INSERTS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information MULTIPLE-STATION SWITCHES (continued) SPECIAL EFFECTS COLOR DISPLAY SCREENS AND INSERTS Display screens and inserts are offered in a wide choice of colors for SERIES 37000 and 38000 Littel Multi-Switch switches. Display screens with high-lights are useful in high ambient lighting; or display screens with soft, uniform, and diffused lighting for use under low ambient lighting conditions. Order display screens, inserts and filters separately. See Part Number Chart below. Series 401 Display Screen B Series 404 SWITCHES A A Legend insert recesses into display screen. Omit when split-face inserts are used. Part Number 404 05 White legend insert has a matte finish on one side suitable for in-the-field marking. C B Part Number 404 12 Retaining Insert C Clear insert snaps into display screen from rear to retain legend inserts. Omit when split-face inserts are used. D D Series 407 Split-Face Insert E Series 402 Color Filter Inserts F Use with Series 38000 E White insert used with blue, white and clear display screens; clear insert used with red, green and yellow. All color filters are omitted where split-face insert is used. F Part Number 402 12 Heat Shield Insert Clear filter insert snaps into push-button housing. Must be used in every pushbutton assembly. G H G Part Number 406 Light Divider Recesses into pushbutton housing. For use with Series 38000. H Series 405 02 Pushbutton Housing. SERIES 401 DISPLAY SCREENS - Display screens with contoured face give a better operation "feel". Rectangular shape provides greater area for engraving legends and symbols. Entire screen is illuminated by single or twin lamp indication. Various brightness and color combinations are possible by use of legend filter and split face inserts. SERIES 404 LEGEND INSERTS - Small translucent inserts provide special color effects. White colored insert (40405) has a special matte surface for in-the-field identification with ink, pencil or lettering transfers. Special color effects can be accomplished with combination of a colored insert with a clear display screen. IMPORTANT: Order legend insert (40412) with every pushbutton. SERIES 407 SPLIT-FACE INSERTS - Split-face inserts provide separate control or indicating functions through the use of color. Ideal for use on Series 38000 Littel Multi-Switch switches where each pushbutton can serve as two indicator lights. Up to two lamps can be used per display screen which are split lengthwise by 2-color split-face inserts. Inserts may be hot-stamped. Order (406) light divider when "flip-flop" lighting is specified; or for redundant lighting where a definite visual indication of lamp failure is desired. A frequently used combination is red and green. Red might indicate danger, stop, etc. Green, go, "okay", etc. IMPORTANT: Use (40212) clear insert with a split-face insert. SERIES 402 FILTER INSERTS - Inserts add greater color definition. Ideal for use under low ambient lighting conditions where brightness of illuminated pushbuttons must be minimized. A white filter insert (40205) is useful in cutting down the brightness of a white color insert and a white or clear display screen. However, it is omitted when color display screen is used. Filters also diffuse light evenly over entire face of display screen with no "hot spots" or darkened corners. IMPORTANT: Order clear insert (40212) for use with every color filter insert. Clear insert snaps in button housing behind a color filter insert and serves as a heat shield. 406 LIGHT DIVIDER - A light divider is used in the standard pushbutton housing to separate the illumination from the twin lamps used in the Series 38000 Littel Multi-Switch switches. Order a light divider for every pushbutton station in the Series 38000 where split-face lighting has been specified. Series 405 PUSHBUTTON HOUSINGS - One-piece housing for all 37000 and 38000 switches. Accepts Series 401, 402, 404, 406 and 407 components. Standard color is black. Other colors available. ORDERING - For variations in pushbutton configurations, contact Switchcraft. Part No. 40101 40103 40104 40105 40108 40112 40116 40401 Figure A B Color Red Green Blue White Yellow Clear "Black Screen" Red Special order only; Contact Switchcraft for price and delivery information. Part No. 40403 40404 40405 40408 40412 40201 40203 40204 40205 Figure B C E Color Green Blue White Yellow Clear (retaining insert) Red Green Blue White DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Part No. 40208 40212 40701 40703 40704 40705 40708 406 40502 40505 Figure E F D G H Color Yellow Clear (heat shield insert) Red Green Blue White Yellow White (light divider) Black (housing) White Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery SWITCHES (R) LITTEL MULTI-SWITCH - ACCESSORIES FAX: 773 792-2129 307 * Please visit the product pages on our website for the most up-to-date product information MULTIPLE-STATION SWITCHES (continued) LITTEL(R) MULTI-SWITCH ACCESSORIES Special Mounting Bracket POSITIONING SWITCH STACKS (SERIES 80P, 800P, 80G AND 800G ONLY) Refer to chart below for proper balancing of the switch stacks mechanical load at each station, "X" denotes correct positioning of the stack on the removable switch stack bracket. Series 80P Stacks 1 2 3 Top Bottom Mounting Bracket 4 5 6 Top Bottom Basic Contact Forms "TINI-STACK" SWITCHES Many combinations of stack switches are available on special order. Contact Switchcraft for specifying assistance, including clearances for stack heights. SERIES 80P - Crossbar welded palladium contacts rated: 2A, 200W maximum, AC non-inductive load. For use where contacts of a released station will return to normal before contacts of a newly operated station are actuated. Not recommended for use on push-lock/push/release function. SERIES 800P - Same as Series 80P but can be used on push-lock/push-release function, or on other functions where contacts of a newly operated station must be actuated before contacts of a released station return to normal. A B C D Other contact forms available on special order SERIES NJ SOLENOID RELEASE Solenoid assembly attaches to end of switch frame and provides electrical release of activated stations. Instructions and hardware furnished. Other voltages are available on special order; contact Switchcraft. SERIES 80G - Same as Series 80P, except includes cross-bar welded gold alloy contacts rated at 1A, 100W maximum, AC non-inductive load. SERIES 800G - Same as Series 80G except for pushlock/push-release and/or other functions as described for Series 800P. BIFURCATED "TINI-STACK" SWITCH STACKS Double reliability through use of bifurcated switch stacks featuring bifurcated leaf springs slotted at the contact end and parallel to the long axis of the leaf spring. Separate crossbar gold alloy contacts are welded to leaf springs on each side, doubling the number of contacts on each spring. TYPICAL MOUNTING SERIES 60BG - Similar to Series 80P, except bifurcated leaf springs with welded crossbar gold alloy contacts rated at 1A, 100W maximum, AC non-inductive load. SERIES 600BG - Same as Series 60BG, except for use on push-lock/push-release function and/or functions as described under Series 800P. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 SWITCHES HIGH CURRENT "TINI-STACK" SWITCH STACKS Heavy duty switch stacks Series 60W for use in 120V, AC power circuits are available with large, fine silver contacts rated at 5A, non-inductive load. Stack spacer width limits mounting to one stack/station on each side of frame and requires special mounting bracket. For 10 and 15A switching, contact Switchcraft. Series 60BG Bifurcated Switch Stacks 308 SWITCHES LITTEL(R) MULTI-SWITCH - ACCESSORIES PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information MULTIPLE-STATION SWITCHES (continued) SWITCHES LITTEL(R) MULTI-SWITCH ACCESSORIES WIRE-WRAPPING TERMINALS Special order wire-wrapping terminals optimize use of semi-automated termination equipment to save production line time. Terminal shoulders accommodate 1, 2 or 3 wrapped connections per terminal and prevent wrapping tool from "bottoming" (on first wrapped connection) and possibly shorting against other metal parts on switch stack. 4-C switching per station maximum. NOTE: Stack height dimension will be greater when wire-wrapping terminals are specified. Stack height for 1-A and 1-B circuit is .516" (13.11 mm). For 1-C height is .594" (15.09 mm). ORDERING: Contact Switchcraft for details. RECOMMENDED WIRE-WRAPPING TOOLS (Gardner -Denver Co. Part Numbers) Wire Gauge Wrapping Bit Sleeve #22 & #24 #25 #26 500131 500131 37006 18840 18840 17611-2 RECOMMENDED WIRE-WRAPPING PARAMETERS Wire Gauge #22 #24 Number of Connections 3 3 Wraps Per Connection 4 5 Wire Gauge #25 #26 Wraps Per Number of Connections Connection 4 3 5 3 SHOULDER SERIES 35000 WITH WIRE- WRAP* TERMINALS SERIES 37000 WITH WIRE- WRAPPED TERMINALS * Registered trademark of Gardner-Denver Co. LAMP SOCKET T12 LAMP SOCKETS AND ADAPTERS LAMP SOCKET T10 Standard on Series 37000, T10 accepts standard midget flange type T1-3/4 lamps. LAMP SOCKET T12 Standard on Series 38000, the T12 socket accepts standard midget flange type T1-3/4 lamps. LAMP ADAPTER T1 LAMP ADAPTER T1 Converts sockets that accommodate standard T 1-3/4, (P1593) midget flange base lamps to accept T 1 subminiature lamps. Adapter fits T 1-3/4 lamp socket. The 2-piece adapter holds lamp securely in place to assure positive contact of lamp circuit in most environments. If you require extra long-life, specify a T 1 lamp adapter for each T 1-3/4 socket. PC TERMINALS Copper alloy PC terminals are integral with associated leaf spring and feature shoulders for proper clearance from PC board and for solid mounting. Contact Switchcraft for details. Available on special order only; Contact factory for price and delivery information. SERIES 37000 WITH PC TERMINALS DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery SWITCHES DW MULTI-SWITCH - SERIES 65000 FAX: 773 792-2129 309 * Please visit the product pages on our website for the most up-to-date product information MULTIPLE-STATION SWITCHES (continued) DW MULTI-SWITCH SERIES 65000 - Four-station with DW Escutcheon Modules installed PART NUMBERS / 2-C PER STATION1 Interlock with Lock-Out 65021K206 65041K206 65061K206 65081K206 65101K206 65121K206 Non-Lock 65022206 65042206 65062206 65082206 65102206 65122206 Push-Lock/ Push-Release 65027206 65047206 65067206 65087206 65107206 65127206 PART NUMBERS / 4-C PER STATION1 Number of Stations2 2 4 6 8 10 12 1. Switches with all-lock function are available on special order. Contact Switchcraft. 2. Odd number of stations (3, 5, 7, 9, 11) are available. Switches with 13 through 18 stations also available. Contact Switchcraft. Special order only; Contact Switchcraft for price and delivery information. Interlock with Lock-Out 65021K212 65041K212 65061K212 65081K212 65101K212 65121K212 Non-Lock 65022212 65042212 65062212 65082212 65102212 65122212 Push-Lock/ Push-Release 65027212 65047212 65067212 65087212 65107212 65127212 Number of Stations2 2 4 6 8 10 12 1. Switches with all-lock function are available on special order. Contact Switchcraft. 2. Odd number of stations (3, 5, 7, 9, 11) are available. Switches with 13 through 18 stations also available. Contact Switchcraft. Special order only; Contact Switchcraft for price and delivery information. PANEL CUTOUT DIMENSIONS DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 SWITCHES SERIES 65000 Available with up to 18 non-illuminated stations in a single row. Maximum switching per station is 4-C (4PDT). Contacts are rated: 3A, AC, 0.5A DC, 125V, non-inductive load. Integral black button is supplied with each station. Switches mount with #6 screws and nut (not furnished). Contact Switchcraft for special assemblies, with ganged assemblies, solenoid release, PC or wire-wrapping terminals, or escutcheon modules. 310 SWITCHES DW MULTI-SWITCH - SERIES 66000 & 67000 PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information MULTIPLE-STATION SWITCHES (continued) DW MULTI-SWITCH SWITCHES SERIES 66000 and 67000 Series 66000 (non-illuminated) and 67000 (illuminated) can be supplied with up to 18 stations, including a square white pushbutton Part Number DW305 at each station. Contacts and ratings are the same as for Series 65000. Lamp sockets (67000) at each station accept 6V to 28V T 1-3/4 flange base lamps (not supplied). Mounts with 2 #6-32 machine screws (not supplied). See page 310 for pushbutton data. Accessories include solenoid release, ganged assemblies, T1 lamp adapter, and metal barriers (between stations). PC and wire-wrapping terminals are also available. Contact Switchcraft. NON-ILLUMINATED DW MULTI-SWITCH SWITCHES Switchcraft offers DW Multi-Switch switches, Series 70000 and 71000 with crossbar plungers which accept a wide variety of Switchcraft and industry pushbuttons. Contact Switchcraft for specifying assistance. SERIES DW40 COLOR INSERTS Many unusual lighting effects can be created using DW40 color inserts. Molded from dimensionally stable, high-temperature plastic in six standard colors, inserts slip into standard Series DW300 pushbuttons providing unusual latitude in custom designing color and legend effects. With no wear from finger-tips, legend life is virtually unlimited. Part No. Color Part No. Color Part No. Color DW41 DW43 Red Green DW44 DW45 Blue White DW47 DW48 Orange Yellow Special order only; Contact Switchcraft for price and delivery information. SERIES DW300 PUSHBUTTONS (DW305 supplied standard) Part No. Color1 Part No. Color1 Part No. Color1 DW301 DW302 DW303 Red Black Green DW304 DW305 DW308 Blue White Yellow DW312 DW313 DW316 Clear Amber "BlackScreen" 1 Other colors available on special order. Buttons are 0.594 (15.09) x 0.594 (15.09) PART NUMBERS/2-C PER STATION1 Interlock with Lock-Out 67021K506 67041K506 67061K506 67081K506 67101K506 67121K506 Non-Lock 67022506 67042506 67062506 67082506 67102506 67122506 Push-Lock/ Push-Release 67027506 67047506 67067506 67087506 67107506 67127506 Number of Stations2 2 4 6 8 10 12 PART NUMBERS/4-C PER STATION1 67021K512 67041K512 67061K512 67081K512 67101K512 67121K512 67022512 67042512 67062512 67082512 67102512 67122512 67027512 67047512 67067512 67087512 67107512 67127512 2 4 6 8 10 12 1. Switches with all-lock function are available on special order. Contact Switchcraft. 2. Odd number of stations (3, 5, 7, 9, 11) are available. Switches with 13 through 18 stations also available. Contact Switchcraft. Special order only; Contact Switchcraft for price and delivery information. Squeeze upper and lower surfaces of pushbutton and pull free of plungers. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Next, grasp lamp with lamp removal tool or fingertips and snapout. Replace lamp and pushbutton. Finished in seconds! Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery SWITCHES DW SWITCH - ACCESSORIES FAX: 773 792-2129 311 * Please visit the product pages on our website for the most up-to-date product information MULTIPLE-STATION SWITCHES (continued) DW MULTI-SWITCH ACCESSORIES One module is required for each station. Installation of the Series DW200 Modules (with barrier) is equally simple. First, place one Series DW100 Module over the pushbutton actuator on one end of the row. On the adjacent actuator, place a Series DW200 Module. Position this module so that the barrier overlaps the edge of the Series DW100 Module. Install the remaining Series DW200 modules in the same manner, with the barriers overlapping. The completed escutcheon will have barriers between adjacent pushbutton actuators, but no barriers at the ends of the rows. SPECIAL SWITCHING FORMS In addition to 2-C and 4-C switching, other circuit forms can be supplied on special order. They are: 1-A, 2-A, 3-A, 4-A, 1-B, 2-B, 3-B, 4-B, 1-C, 3-C, 1-D, 2-D, 3-D, and 4-D. BARRIERS (SERIES 67000 ONLY) As an option, (field installable) barriers can be specified and installed. Sturdy wire barriers fit between pushbuttons and prevent accidental simultaneous actuation of adjacent push-buttons. When a pushbutton is depressed, the fingertip is guided away from adjacent pushbuttons, and all pressure is applied to the correct pushbutton. Switchcraft Part Number P2359 Barriers (package of 25) Series DW-100 (without barrier) DW101 DW102 DW05 Series DW-200 (with barrier) DW201 DW202 DW205 SOLENOID RELEASE Color* Red Black White * Other colors available on special order. Special order only; Contact Switchcraft for price and delivery information. Solenoids provide electromechanical assistance in releasing locked switch stations in switches with up to 12 stations. Release can be effected from a local or remote position. Solenoids are available for use with switches having inter-lock, all-lock, or push-lock/push-release mechanical functions. All solenoids are "pull-type". When ordered separately, solenoids are supplied with all mounting hardware. Brass terminals accept "push-on" type clips (ARK-LES #3500M20C), or wiring can be soldered directly to the lugs. SPECIFICATIONS PANEL OPENING DW100 Frame, Latch Bar, and Switch Housing: Steel, plated. Mounting Studs (Series 66000 and 67000): Same as frame above. Pushbutton Actuators (Series 65000): Molded thermoplastic. Pushbuttons (Series 66000 and 67000): Molded thermoplastic. Terminals: Copper alloy, silver-plated. Contactors: Copper alloy, plated. Terminal Board: Rigid plastic. Lamp Socket (Series 67000): Copper alloy, plated. Part Number DW1 Switch Function Interlock DW3 All-Lock Right DW4 DW7 Interlock All-Lock or PushLock/PushRelease Left Right DW200 Coil Res. (Ohms) 361 Duty Cycle 20% 115 AC, 60 Hz 130 10% 24 DC 24 DC 14.2 8.96 20% 10% Mounting* Voltage Left 115 AC, 60 Hz * Direction indicates side of switch frame solenoid is mounted on (solenoid terminals up). DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 SWITCHES ESCUTCHEON MODULES, SERIES DW100 AND DW200 Modules are available in colors to match or contrast with Series 65000 pushbutton colors. Modules are simply slipped over the pushbuttons before the switch is mounted on the panel. Flanges on modules overlap the panel cutout and hold modules securely in place while adding only 0.02" (.051 mm) behind panel space. 312 SWITCHES TINI (R) DW MULTI-SWITCH - SERIES 90000 & 92000 PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information SWITCHES MULTIPLE-STATION SWITCHES (continued) SERIES 92000 Switch TDW-F Flip-Flop Pushbutton Installed SERIES 90000 with A-650 Pushbuttons Installed TINI(R) DW MULTI-SWITCH - SERIES 90000, 92000 Subminiature, multiple station switches have pushbuttons on 0.394" (10mm), 0.590" (15mm), or 0.787" (20mm) centers. Four mechanical functions: Interlock, Non-Lock, All-Lock and Push-Lock/Push-Release. Switches mount in panels up to .343" (8.71mm) thick. Switching per station is 2-C (2PDT), 4-C (4PDT), 6-C (6PDT) or 8-C (8PDT). Contact ratings: 0.5A, 28V AC or DC non-inductive. Solder lug or PC terminals. Pushbuttons for Tini DW Multi-Switch switches must be specified separately, below. Refer to page 316 for data on TWDF pushbuttons. SERIES 90000 - Up to 18 stations on 0.394" (10mm) centers in a row. Switch mounts with 2, #3 screws (not supplied). PART NUMBERS/2-C PER STATION1 SERIES 92000 - 15mm station centers. Wider spacing permits mounting Series TDWF pushbuttons. SPECIFICATIONS ELECTRICAL Switching Module Rating: 0.5A, 28V AC or DC non-inductive load. Initial Contact Resistance: 10 milliohms. Series A650 pushbuttons can be specified for both Series 90000 and 92000. Legends can be specified; contact Switchcraft. Interlock with Lock-Out 90024B06 90044B06 90064B06 90084B06 90104B06 90124B06 Non-Lock 90022B06 90042B06 90062B06 90082B06 90102B06 90122B06 Push-Lock/ Push-Release 90027B06 90047B06 90067B06 90087B06 90117B06 90127B06 Number of Stations2 2 4 6 8 10 12 PART NUMBERS/4-C PER STATION1 MATERIALS Frame Switch Housing: Steel, plated. Latch Bar: Stainless steel on all-lock function; zinc alloy on interlock function. Latch Bar Return Spring: Tinned music wire. Plunger: Molded thermoplastic. Plunger Return Spring: Tinned music wire. Terminals/Contacts: Copper alloy, silver-plated. Contact Sliders: Bifurcated bimetal (silver on copper alloy). Terminal Board: Molded thermoplastic (UL 94V-0). Pushbuttons: Molded thermoplastic. 90024B12 90044B12 90064B12 90084B12 90104B12 90124B12 90022B12 90042B12 90062B12 90082B12 90102B12 90122B12 90027B12 90047B12 90067B12 90087B12 90117B12 90127B12 2 4 6 8 10 12 1 Switches with all-lock function are available on special order. Contact Switchcraft. 2 Odd number of stations (3, 5, 7, 9, 11) are available. Switches with 13 through 18 stations also available. Contact Switchcraft. Special order only; Contact Switchcraft for price and delivery information. SPECIFYING NOTE: PUSHBUTTONS Color Part Number A6501 Red A6504 Blue A6502 Black A6505 White A6503 Green A6508 Yellow Part Number Color Series 90000 Part Numbers are given in table. To order Series 92000 switches, substitute "2" for "0" for second digit of Part Number. Example; Part Number 92024B06 in the Series 92000 version 0.590" (15mm centers) of Part Number 90024B06 0.394" (10mm centers) interlock with lock-out, 2-C switching per station. Buttons are 0.386 (9.80 mm) x 0.386 (9.80 mm). Special order only; Contact Switchcraft for price and delivery information. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery FAX: 773 792-2129 SWITCHES (R) TINI DW MULTI-SWITCH - SERIES 90000 & 92000 313 * Please visit the product pages on our website for the most up-to-date product information MULTIPLE-STATION SWITCHES (continued) TINI(R) DW MULTI-SWITCH PANEL OPENING SERIES 90000 WITH SERIES A-650 PUSHBUTTONS SERIES 90000 and 92000 RECOMMENDED PC BOARD LAYOUT (Component Side) PANEL OPENING SERIES 92000 WITH TDW-F PUSHBUTTONS NOTE: For Series 90000 "A" dimension is .394" (10.0mm) For Series 92000 "A" dimension is .590" (15.0mm) DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 SWITCHES PANEL OPENING SERIES 92000 WITH SERIES A-650 PUSHBUTTONS 314 SWITCHES IBS MULTI-SWITCH - SERIES IBS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information MULTIPLE-STATION SWITCHES (continued) IBS10B04106AR SWITCHES TYPE I 0.388 (9.86) x 0.216 (5.49) TYPE II 0.464 (11.79) x 0.288 (7.32) PART NUMBERS/0.394" (10MM) CENTERS1 Number of Stations2 2 4 6 8 10 12 Interlock IBS10B02106AR IBS10B04106AR IBS10B06106AR IBS10B08106AR IBS10B10106AR IBS10B12106AR IBS MULTI-SWITCH SWITCHES SERIES IBS Series IBS miniature pushbutton switches are mounted on common frames, up to 12 stations long with center-to-center spacing of 0.394" (10mm), 0.590" (15mm) or 0.787" (20mm). Available with interlock, non-lock (momentary) or push-lock/push-release mechanical functions. .130" (3.30mm) x .130" (3.30mm) square plungers accept a full line of industry standard pushbuttons. Switches are stocked without pushbuttons due to wide variety that can be used. Order pushbuttons separately. Switches have .157" (4mm) long PC terminals for mounting single- or doublesided PC boards up to .094" (2.39mm) thick. Close stacking (centers) permits high density within minimum front panel space. PUSHBUTTONS Pushbuttons designed for IBS switches are available in white, black, red, blue and gray. Others colors are available on special order. Pushbutton faces are concave for operator convenience and can be mounted either horizontally or vertically. Pushbuttons must be ordered separately, but may be factory installed, if desired, at nominal extra cost. SPECIFICATIONS MECHANICAL Switch Actuation: Momentary, interlock and push-lock/ push-release. Plunger Travel: .144" (3.66 mm). Actuation Force: At .135" (3.43mm) travel: 12-15 oz. ELECTRICAL 0.125A resistive @ 125 V AC, .25 AMP at 28V DC. MATERIALS Housing: Thermoplastic 94V-0. Plunger: Thermoplastic UL 94V-0. Contactors: Copper alloy. Terminals: Copper alloy, solder plated. Tin-dipped available on special order. Contact Surfaces: Plated. Frame: Copper alloy. Latch Bar: Thermoplastic. PART NUMBERS/0.590" (15MM) CENTERS1 PART NUMBERS/0.787" (20MM) CENTERS1 2 4 6 8 10 12 IBS20B02106AR IBS20B04106AR IBS20B06106AR IBS20B08106AR IBS20B10106AR IBS20B12106AR 1. Switches with all-lock function are available on special order. Contact Switchcraft. 2. Odd number of stations (3, 5, 7, 9, 11) are available. Switches with 13 through 18 stations also available. Contact Switchcraft. Special order only; Contact Switchcraft for price and delivery information. PUSHBUTTON PART NUMBERS Type I P2936 P2937 P2938 P2939 P2940 P2941 P2942 P2943 - Type II P2951 P2952 P2953 P2954 P2955 P2956 P2957 P2958 P2979 P2992 Color White Black Red Yellow Green Blue Gray Brown Cream Tangerine Available on special order only; contact Switchcraft for price and delivery. DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com 2 4 6 8 10 12 IBS15B02106AR IBS15B04106AR IBS15B06106AR IBS15B08106AR IBS15B10106AR IBS15B12106AR Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery SWITCHES IBS MULTI-SWITCH - SERIES IBS FAX: 773 792-2129 315 * Please visit the product pages on our website for the most up-to-date product information MULTIPLE-STATION SWITCHES (continued) IBS MULTI-SWITCH SWITCHES SERIES IBS IBS PART NUMBERING CODE IBS X XX X XX1 X CENTERS 0.394" (10mm) 0.590" (15mm) 0.787" (20mm) FRAME STYLE A - Mounting Ears B - No Mounting Ears STATIONS 01 - 12 MECHANICAL FUNCTION 1 - Interlock 2 - Non-Lock CIRCUITS 01 - 1A 02 - 1B 03 - 1C 04 - 2A 05 - 2B 06 - 2C TERMINAL LENGTH R A - 0.157" (4mm) * 8 stations maximum on 0.787" (20mm) centers. 1. See page 269 for individual switch terminal conjunction. DIMENSIONS RECOMMENDED PC BOARD LAYOUT (Component Side) (.300 x .100) (7.62 mm) x (2.54) 0.394" (10mm) 0.590" (15mm) 0.394" (10mm) CENTERS 0.787" (20mm) STATIONS Dimension 0.590" (15mm) CENTERS STATIONS Dimension 0.787" (20mm) CENTERS STATIONS Dimension DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 SWITCHES XX 316 SWITCHES MULTI-SWITCH PUSHBUTTONS PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information MULTIPLE-STATION SWITCHES (continued) MULTI-SWITCH PUSHBUTTONS SWITCHES Switch Series Fig. 1 Pushbutton Series1 4004 35000 37000 X (Std.) 38000 X (Std.) 650002 67000 900003 920003 IBS3 Illuminated Fig. 2 4095 Non-Illuminated Fig. 5 Fig. 6 Fig. 3 Fig. 4 DW3006 A-590 X-(Std.) E-5905 X Fig. 7 Fig. 8 Fig. 9 A-650 TDW-F Type I Type II X X X X X X X X (Std.) 1. Any pushbutton series can be specified with engraved legends. 2. Buttons are an integral part of switch assembly on Series 65000. 3. Switches stocked without pushbuttons due to wide variety that can be used. Order buttons separately. 4. Display screens and inserts are also available in a wide choice of colors; see "SPECIAL EFFECTS COLOR DISPLAY SCREENS AND INSERTS". 5. Double width button 6. Colored inserts are available in a wide choice of colors; see "SERIES DW40 COLOR INSERTS". SPECIFYING NOTE: Most pushbuttons can be specified in red, black, green, blue, white or yellow. "Black-Screen", amber, clear, and other colors are also possible. Contact Switchcraft with your requirements. SERIES TDWF - "FLIP-FLOP" PUSHBUTTONS Unique internal "flip-flop" mechanism permits button face to change colors without electrical energy, lamps or wiring. When pushbutton is operated, highly reflective panels inside housing change position and use ambient light to give a bright illuminated effect. Black pushbuttons are .59" (15mm) high x .63" (16mm) wide. Display window is .315" (8mm) x .374" (9.5mm) wide. NOTE: "FLIP-FLOP" PUSHBUTTONS ARE DESIGNED FOR USE WITH SERIES 92000 SWITCHES ONLY. Order "flip-flop" pushbuttons with Series 92000 switches. TDW-F "Flip-Flop" Pushbutton Part Numbering TDW-F "FLIP-FLOP" PUSHBUTTON PART NUMBERING DIMENSIONS ARE FOR REFERENCE ONLY www.switchcraft.com Inch (mm) (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery SWITCHES MULTI-SWITCH PUSHBUTTONS - SERIES X, Y, & Z GLO-BUTTON FAX: 773 792-2129 317 * Please visit the product pages on our website for the most up-to-date product information MULTIPLE-STATION SWITCHES (continued) MULTI-SWITCH PUSHBUTTONS TDWF PUSHBUTTON LEGENDS (special order) Horizontally Mounted Switches: Three, .125" (3.18 mm) high characters, each pushbutton. Vertically Mounted Switches: Three, .125" (3.18 mm) high characters, each pushbutton. MULTI-SWITCH PUSHBUTTON PART NUMBERS Use the information below to specify colors of the pushbutton series desired. Series TDWF must be specified separately (see page 316). 1 through 999 . Period Short Dash Arrow # Number or Pound $ Dollar | Vertical Bar A through ZZZ " Quotes -Long Dash & Ampersand / Slash Cent NOTE: Recommended minimum standoff for switches mounted with TDW-F pushbutton is .5" (12.7mm). SERIES X, Y AND Z "GLO-BUTTON" Non-illuminated pushbuttons provide a clearly visible legend like illuminated pushbuttons - without lamps, wiring or power. With button depressed, illuminator moves up behind front screen, and legend "lights up" by efficient reflection of external ambient light. With button in "out" position, illuminator retracts and legend appears non-luminous. Series X - specify for horizontal or vertical mount switches. Series Y - legends marked across .625" (15.88 mm) dimension. For horizontal mount switches. Series Z - legends marked across .75" (19.05 mm) dimension. For vertical mount switches. Part Number X21248 X51248 Y21248 Y28248 Y51248 Z21248 Z28248 Z51248 Figure 10 10 11 11 11 12 12 12 Screen Color Black White Black Black White Black Black White Illuminator Color Orange-Red Orange-Red Chartreuse Orange-Red Orange-Red Chartreuse Orange-Red Size inches (mm) Width .5 (12.7) Height .5 (12.7) .625 (15.88) .75 (19.05) .75 (19.05) .625 (15.88) PART NUMBER 40001 40002 40003 40004 40005 40008 40012 40901 40902 40903 40904 40905 40908 40912 A591 A592 A593 A594 A595 A596 A598 E591 E592 E594 E595 E596 E598 Overall Size Inch (mm) FIGURE COLOR Width Height . . 1 Red Black Green Blue White Yellow Clear .594 (15.09) .974 (24.7) 2 Red Black Green Blue White Yellow Clear 1.219 (30.96) .719 (18.26) .594 (15.09) .594 (15.09) 1.234 (31.34) .594 (15.09) 4 1 Red Black Green Blue White Brown Yellow Red Black Blue White Brown Yellow Available on special order only; contact Switchcraft for price and delivery. DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 SWITCHES LEGEND CHARACTERS AVAILABLE 318 NOTES PHONE: 773 792-2700 * Please visit the product pages on our website for the most up-to-date product information www.switchcraft.com (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery 319 FAX: 773 792-2129 * Please visit the product pages on our website for the most up-to-date product information 112BPC................................................98 112BPCS...........................................100 113........................................................98 113B .....................................................98 113BPC................................................98 113BPC1M ..........................................98 113BPCS...........................................100 113D.....................................................98 113DPC ...............................................98 113E .....................................................98 113EPC................................................98 113EPCS...........................................100 113F .....................................................98 113FPC................................................98 113FPCS ...........................................100 113PC ..................................................98 113PCS..............................................100 114B .....................................................98 114BPC................................................98 114BPC1M ..........................................98 114BPCS...........................................100 120......................................................108 1200 ...................................................203 12001 .................................................297 12002 .................................................297 12003 .................................................297 12003D ..............................................297 12004 .................................................297 12005 .................................................297 12006 .................................................297 12006D ..............................................297 12010 .................................................297 12011 .................................................297 12012 .................................................297 12013 .................................................297 12014 .................................................297 12015 .................................................297 12016 .................................................297 12017 .................................................297 12033 .................................................297 12033T...............................................297 12034 .................................................297 12035 .................................................297 12036 .................................................297 12036D ..............................................297 12037 .................................................297 12037T...............................................297 121......................................................108 1230 ...................................................108 1238 ...................................................108 125......................................................109 128......................................................108 12A .......................................................94 12B .......................................................94 12BL5M................................................47 12BL6M................................................47 12CL5M ...............................................46 12DL5M ...............................................47 12DL6M ...............................................47 12GM5M ..............................................46 12GM6M ..............................................46 12YL5M................................................47 13..........................................................94 131......................................................108 133......................................................155 1332A.................................................203 1332B.................................................203 1334B.................................................203 1394RAPC...........................................58 1394SMT .............................................58 13A .......................................................94 13AL5F.................................................48 13AL6F.................................................48 13B .......................................................94 13E .......................................................94 13EL5F.................................................48 1400 ...................................................203 1400301.............................................203 1400315.............................................203 142A...................................................110 14B .......................................................94 151......................................................107 152......................................................107 152B...................................................107 153......................................................107 1532A.................................................203 1532A301 ..........................................203 1532B.................................................203 1532B301 ..........................................203 1534B.................................................203 154......................................................107 155......................................................107 15AL7F.................................................48 15AL8F.................................................48 15BL7M................................................47 15BL8M................................................47 15CL7M ...............................................46 15CL8M ...............................................46 15DL7M ...............................................47 15EL8F.................................................48 15GM7M ..............................................46 15GM8M ..............................................46 15J9068 .............................................230 15J9076 .............................................230 15J9077 .............................................230 15J9078 .............................................230 160......................................................147 1600 ...................................................212 1632A.................................................212 1632B.................................................212 1634B.................................................212 16J1055 .............................................223 170......................................................147 1700 ...................................................212 172......................................................148 173......................................................152 174S...................................................152 175......................................................152 176S...................................................152 177S...................................................152 178......................................................152 1789 ...................................................212 179......................................................152 181......................................................148 182......................................................148 182QB................................................147 182QBD .............................................147 184......................................................147 184L ...................................................147 187......................................................149 187B...................................................149 187BD ................................................149 187BL.................................................149 187D...................................................149 187L ...................................................149 188......................................................149 18QA18..............................................262 18QB18..............................................262 18QD18..............................................262 18QF18..............................................262 18QH18..............................................262 18QK18..............................................262 18QN18..............................................262 190......................................................151 190A...................................................151 190B...................................................151 190BL.................................................151 201......................................................274 201S...................................................274 202......................................................274 202S...................................................274 203......................................................274 SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 203S...................................................274 20GM8M ..............................................46 20Q*20**............................................262 220......................................................153 225......................................................153 226......................................................154 227......................................................153 228......................................................153 229......................................................153 22QB22..............................................263 22QD22..............................................263 22QF22..............................................263 22QK22..............................................263 22QN22..............................................263 230......................................................153 2300......................................................86 2331......................................................86 2332A...................................................86 2332B...................................................86 2333......................................................86 235......................................................153 236......................................................154 237......................................................153 238......................................................153 239......................................................153 240......................................................145 2400 ...................................................205 2432A.................................................205 2432B.................................................205 2434B.................................................205 245......................................................145 24B .....................................................109 25........................................................109 250......................................................145 2501F ...................................................65 2501M ..................................................65 2501MP................................................65 2532A.................................................205 2532B.................................................205 2533 ...................................................205 2533B.................................................205 2534B.................................................205 2542B.................................................205 2544B.................................................205 255......................................................145 2588 ...................................................205 2589 ...................................................205 260......................................................145 2600 ...................................................205 2600301.............................................205 2600310.............................................205 267......................................................145 269......................................................145 26U1003 ............................................278 26U1004 ............................................278 26U1005 ............................................278 26U1006 ............................................278 26U1007 ............................................278 26U1008 ............................................278 26U1009 ............................................278 26U1010 ............................................278 270..............................................145-146 2732A.................................................205 2732A301 ..........................................205 2732B.................................................205 2732B301 ..........................................205 2733B.................................................205 2734B.................................................205 2734B301 ..........................................205 2789 ...................................................205 280..............................................145-146 281..............................................145-146 282......................................................155 285..............................................145-146 285L ...................................................145 288..............................................145-146 INDEX 03BL2M................................................47 05BL3M................................................47 05BL5M................................................47 05CL3M ...............................................46 05CL5M ...............................................46 05DL3M ...............................................47 05DL5M ...............................................47 05GM3M ..............................................46 05GM5M ..............................................46 05YL3M................................................47 05YL5M................................................47 06AL5F.................................................48 06EL5F.................................................48 09BL4M................................................47 09CL4M ...............................................46 09DL4M ...............................................47 09GM4M ..............................................46 09YL4M................................................47 101......................................................274 101S...................................................274 102......................................................274 102S...................................................274 103......................................................274 103S...................................................274 11..........................................................94 11001 .................................................231 11001L ...............................................231 11002 .................................................231 11002L ...............................................231 11003 .................................................231 11003D ..............................................231 11003DL ............................................231 11003L ...............................................231 11004 .................................................231 11004L ...............................................231 11005 .................................................231 11005L ...............................................231 11006 .................................................231 11006D ..............................................231 11006DL ............................................231 11006L ...............................................231 11008 .................................................231 11008L ...............................................231 11009 .................................................231 11009L ...............................................231 11012 .................................................231 11012L ...............................................231 111........................................................98 111PC ..................................................98 111PCS..............................................100 11201 .................................................231 11201L ...............................................231 11202 .................................................231 11202L ...............................................231 11203 .................................................231 11203D ..............................................231 11203DL ............................................231 11203L ...............................................231 11204 .................................................231 11204L ...............................................231 11205 .................................................231 11205L ...............................................231 11206 .................................................231 11206D ..............................................231 11206DL ............................................231 11206L ...............................................231 11208 .................................................231 11208L ...............................................231 11209 .................................................231 11209L ...............................................231 11212 .................................................231 11212L ...............................................231 112A .....................................................98 112APC................................................98 112APCS...........................................100 112B .....................................................98 320 PHONE: 773 792-2700 INDEX * Please visit the product pages on our website for the most up-to-date product information 290..............................................145-146 297..............................................145-146 298.............................................146, 155 299......................................................150 2BL6M..................................................47 2C1072 ..............................................134 2P-1216 .............................................148 2P1248...............................................145 2P1251...............................................147 2P1298...............................................145 2P1384...............................................157 2P1419...............................................158 2P1495...............................................145 2P1509...............................................153 2P1515...............................................162 2P1624...............................................162 2P2003...............................................143 305HJ084184....................................247 305KD084184 ...................................247 306HK042306 ...................................247 306HK084306 ...................................247 321........................................................27 322........................................................27 323........................................................27 324........................................................27 32HR***..............................................240 330F1 .................................................161 330F2 .................................................161 332A...................................................159 336A...................................................159 336B...................................................159 33HR***..............................................240 340......................................................159 345A...................................................159 349A...................................................159 350......................................................148 3501F .................................................123 3501FP ..............................................123 3501FR ..............................................123 3501M ................................................161 3501MC .............................................161 3502 ...................................................161 35021K206 ........................................303 35021K212 ........................................303 35022206...........................................303 35022212...........................................303 35027206...........................................303 35027212...........................................303 3502A.................................................161 3502AAU............................................161 3502ABAU.........................................161 3502RA..............................................161 3502RAAU.........................................161 3502RABAU ......................................161 3503 ...................................................123 35041K206 ........................................303 35041K212 ........................................303 35042206...........................................303 35042212...........................................303 35047206...........................................303 35047212...........................................303 3504M ................................................161 3505F .................................................123 35061K206 ........................................303 35061K212 ........................................303 35062206...........................................303 35062212...........................................303 35067206...........................................303 35067212...........................................303 3507 ...................................................161 35081K206 ........................................303 35081K212 ........................................303 35082206...........................................303 35082212...........................................303 35087206...........................................303 35087212...........................................303 35101K206 ........................................303 35101K212 ........................................303 35102206...........................................303 35102212...........................................303 35107206...........................................303 35107212...........................................303 35121K206 ........................................303 35121K212 ........................................303 35122206...........................................303 35122212...........................................303 35127206...........................................303 35127212...........................................303 3514PC..............................................123 3515PC..............................................123 3517PC..............................................123 352A...................................................159 35581 .................................................161 35582 .................................................161 35585 .................................................161 35HDBAU ..........................................156 35HDBAUS........................................156 35HDBN.............................................156 35HDBNS ..........................................156 35HDNAU..........................................156 35HDNAUS .......................................156 35HDNN ............................................156 35HDNNS..........................................156 35HDRAAU .......................................156 35HDRABAU.....................................156 35HDRANN.......................................156 35HR***..............................................240 35PM1................................................119 35PM2A .............................................119 35RAPC2AH3...........................114, 116 35RAPC2AHN2........................114, 116 35RAPC2AHN3 ................................114 35RAPC2AV ..............................114-115 35RAPC2AV4 ............................114-115 35RAPC2AVN4.................................114 35RAPC2BH3...........................114, 116 35RAPC2BHN2........................114, 116 35RAPC2BHN3 ................................114 35RAPC2BV4............................114-115 35RAPC2BVN4.................................114 35RAPC3BH3...........................114, 116 35RAPC3BHN2........................114, 116 35RAPC3BHN3 ................................114 35RAPC3BV4............................114-115 35RAPC3BVN4.................................114 35RAPC4BH3...........................114, 116 35RAPC4BHN2........................114, 116 35RAPC4BHN3 ................................114 35RAPC4BV4............................114-115 35RAPC4BVN4.................................114 35RAPC7J.........................................112 35RAPC7JS ......................................112 35RASMT ..........................................117 35RASMT2AHNTR...........................117 35RASMT2BHNTR...........................117 35RASMT3BHNTR...........................117 35RASMT4BHNTR...........................117 361A ..........................................159, 265 362A...................................................265 363......................................................159 364A...................................................159 365......................................................159 36HR***..............................................240 37021K1206 ......................................305 37021K1212 ......................................305 370221206.........................................305 370221212.........................................305 370271206.........................................305 370271212.........................................305 37041K1206 ......................................305 37041K1212 ......................................305 370421206.........................................305 www.switchcraft.com 370421212.........................................305 370471206.........................................305 370471212.........................................305 37061K1206 ......................................305 37061K1212 ......................................305 370621206.........................................305 370621212.........................................305 370671206.........................................305 370671212.........................................305 37081K1206 ......................................305 37081K1212 ......................................305 370821206.........................................305 370821212.........................................305 370871206.........................................305 370871212.........................................305 370A...................................................159 37101K1206 ......................................305 37101K1212 ......................................305 371021206.........................................305 371021212.........................................305 371071206.........................................305 371071212.........................................305 37121K1206 ......................................305 37121K1212 ......................................305 371221206.........................................305 371221212.........................................305 371271206.........................................305 371271212.........................................305 374......................................................159 376......................................................159 377......................................................159 380......................................................148 38021K1206 ......................................305 38021K1212 ......................................305 380221206.........................................305 380221212.........................................305 380271206.........................................305 380271212.........................................305 38041K1206 ......................................305 38041K1212 ......................................305 380421206.........................................305 380421212.........................................305 380471206.........................................305 380471212.........................................305 38061K1206 ......................................305 38061K1212 ......................................305 380621206.........................................305 380621212.........................................305 380671206.........................................305 380671212.........................................305 38081K1206 ......................................305 38081K1212 ......................................305 380821206.........................................305 380821212.........................................305 380871206.........................................305 380871212.........................................305 38101K1206 ......................................305 38101K1212 ......................................305 381021206.........................................305 381021212.........................................305 381071206.........................................305 381071212.........................................305 38121K1206 ......................................305 38121K1212 ......................................305 381221206.........................................305 381221212.........................................305 381271206.........................................305 381271212.........................................305 383A .....................................................27 384A .....................................................27 386A .....................................................28 387A .....................................................28 389........................................................28 390........................................................28 391Q13 ................................................28 391Q23 ................................................28 391Q33 ................................................28 391Q43 ................................................28 391Q53 ................................................28 391Q63 ................................................28 40........................................................147 40001 .................................................317 40002 .................................................317 40003 .................................................317 40004 .................................................317 40005 .................................................317 40008 .................................................317 40012 .................................................317 40101 .................................................306 40103 .................................................306 40104 .................................................306 40105 .................................................306 40108 .................................................306 40112 .................................................306 40116 .................................................306 40201 .................................................306 40203 .................................................306 40204 .................................................306 40205 .................................................306 40208 .................................................306 40212 .................................................306 40401 .................................................306 40403 .................................................306 40404 .................................................306 40405 .................................................306 40408 .................................................306 40412 .................................................306 40502 .................................................306 40505 .................................................306 406......................................................306 40701 .................................................306 40703 .................................................306 40704 .................................................306 40705 .................................................306 40708 .................................................306 40901 .................................................317 40902 .................................................317 40903 .................................................317 40904 .................................................317 40905 .................................................317 40908 .................................................317 40912 .................................................317 41........................................................110 411......................................................141 412......................................................141 41203 .................................................298 41206 .................................................298 41208 .................................................298 41212 .................................................298 41306 .................................................298 41308 .................................................298 41312 .................................................298 41324 .................................................298 414......................................................141 415......................................................141 420......................................................138 425......................................................138 42A .....................................................110 43A .....................................................110 44..........................................................65 46201ME ...........................................284 46201MR ...........................................284 46202LE.............................................284 46202LR ............................................284 46202ME ...........................................284 46202MR ...........................................284 46203LE.............................................284 46203LR ............................................284 46203LSE..........................................284 46203LSR..........................................284 46203ME ...........................................284 46203MR ...........................................284 (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery 321 FAX: 773 792-2129 * Please visit the product pages on our website for the most up-to-date product information 516-120-000-101...............................178 516-120-000-102...............................178 516-290-500 ......................................178 516-290-590 ......................................178 520......................................................106 53B .....................................................109 54A .....................................................109 54B .....................................................109 55........................................................109 5501F ...................................................65 5501M ..................................................65 5501MF................................................65 5501MP................................................65 55HA2F................................................50 56206L1.............................................288 56206L2.............................................288 56313L1.............................................289 56313L2.............................................289 570......................................................146 57GB3F................................................49 57GB5F................................................49 57HB3F................................................50 57HB5F................................................50 57KD3M...............................................48 57NC5F................................................50 57PC3F................................................51 57PC3FS .............................................52 57PC5F................................................51 57PC5FS .............................................52 580......................................................146 581......................................................146 585......................................................146 588......................................................146 58NC3F................................................50 590......................................................146 597......................................................146 598......................................................146 59GB3F................................................49 60........................................................151 60GB4F................................................49 60HA4F................................................50 60NC4F................................................50 60PC4F................................................51 60PC4FS .............................................52 610......................................................106 612......................................................106 615......................................................106 61GB5F................................................49 61GB6F................................................49 61HA5F................................................50 61NC5F................................................50 61PC5F................................................51 61PC5FS .............................................52 61PC6F................................................51 61PC6FS .............................................52 620......................................................106 62206L ...............................................290 62GB7F................................................49 62GB8F................................................49 62HB7F................................................50 62HB8F................................................50 62NC7F................................................50 62NC8F................................................50 62PC7F................................................51 62PC7FS .............................................52 62PC8F................................................51 62PC8FS .............................................52 65021K206 ........................................309 65021K212 ........................................309 65022206...........................................309 65022212...........................................309 65027206...........................................309 65027212...........................................309 65041K206 ........................................309 65041K212 ........................................309 65042206...........................................309 65042212...........................................309 65047206...........................................309 65047212...........................................309 65061K206 ........................................309 65061K212 ........................................309 65062206...........................................309 65062212...........................................309 65067206...........................................309 65067212...........................................309 65081K206 ........................................309 65081K212 ........................................309 65082206...........................................309 65082212...........................................309 65087206...........................................309 65087212...........................................309 65101K206 ........................................309 65101K212 ........................................309 65102206...........................................309 65102212...........................................309 65107206...........................................309 65107212...........................................309 65121K206 ........................................309 65121K212 ........................................309 65122206...........................................309 65122212...........................................309 65127206...........................................309 65127212...........................................309 67021K506 ........................................310 67021K512 ........................................310 67022506...........................................310 67022512...........................................310 67027506...........................................310 67027512...........................................310 67041K506 ........................................310 67041K512 ........................................310 67042506...........................................310 67042512...........................................310 67047506...........................................310 67047512...........................................310 67061K506 ........................................310 67061K512 ........................................310 67062506...........................................310 67062512...........................................310 67067506...........................................310 67067512...........................................310 67081K506 ........................................310 67081K512 ........................................310 67082506...........................................310 67082512...........................................310 67087506...........................................310 67087512...........................................310 67101K506 ........................................310 67101K512 ........................................310 67102506...........................................310 67102512...........................................310 67107506...........................................310 67107512...........................................310 67121K506 ........................................310 67121K512 ........................................310 67122506...........................................310 67122512...........................................310 67127506...........................................310 67127512...........................................310 70........................................................147 712A...................................................134 712RA ................................................134 722A...................................................134 722RA ................................................134 732A...................................................134 732RA ................................................134 740......................................................157 745......................................................157 750......................................................157 755......................................................157 760......................................................162 760K...................................................162 SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 761K...................................................162 765......................................................162 765K...................................................162 766K...................................................162 770......................................................157 780......................................................157 80........................................................108 820......................................................142 830......................................................108 838......................................................108 84206 .................................................296 84206L ...............................................296 84212 .................................................296 84212L ...............................................296 84306 .................................................296 84306L ...............................................296 84312 .................................................296 84312L ...............................................296 84324 .................................................296 84324L ...............................................296 850.............................................121, 158 851......................................................158 852......................................................158 853......................................................158 855......................................................158 856......................................................158 857......................................................158 858......................................................158 860......................................................162 865......................................................162 88........................................................108 880......................................................158 881......................................................158 882......................................................158 883......................................................158 90........................................................151 90022B06 ..........................................312 90022B12 ..........................................312 90024B06 ..........................................312 90024B12 ..........................................312 90027B06 ..........................................312 90027B12 ..........................................312 90042B06 ..........................................312 90042B12 ..........................................312 90044B06 ..........................................312 90044B12 ..........................................312 90047B06 ..........................................312 90047B12 ..........................................312 90062B06 ..........................................312 90062B12 ..........................................312 90064B06 ..........................................312 90064B12 ..........................................312 90067B06 ..........................................312 90067B12 ..........................................312 90082B06 ..........................................312 90082B12 ..........................................312 90084B06 ..........................................312 90084B12 ..........................................312 90087B06 ..........................................312 90087B12 ..........................................312 90102B06 ..........................................312 90102B12 ..........................................312 90104B06 ..........................................312 90104B12 ..........................................312 90117B06 ..........................................312 90117B12 ..........................................312 90122B06 ..........................................312 90122B12 ..........................................312 90124B06 ..........................................312 90124B12 ..........................................312 90127B06 ..........................................312 90127B12 ..........................................312 903......................................................273 903D...................................................273 9115......................................................30 9129......................................................30 INDEX 46204LE.............................................284 46204LR ............................................284 46204ME ...........................................284 46204MR ...........................................284 46206LE.............................................284 46206LFE ..........................................284 46206LFR..........................................284 46206LR ............................................284 46206LSE..........................................284 46206LSR..........................................284 46206ME ...........................................284 46206MP ...........................................284 46206MR ...........................................284 46256LFR..........................................284 46311LDR..........................................285 46311MDR ........................................285 46311TDR .........................................285 46313LDR..........................................285 46313MDR ........................................285 46313TDR .........................................285 47202LE.............................................286 47202LR ............................................286 47203LE.............................................286 47203LR ............................................286 47204LCE..........................................286 47204LCR..........................................286 47204LE.............................................286 47204LR ............................................286 47206LCE..........................................286 47206LCR..........................................286 47206LE.............................................286 47206LR ............................................286 47215LCR..........................................286 47215LR ............................................286 47217LCR..........................................286 47217LR ............................................286 47221LCR..........................................286 47221LR ............................................286 47227LFE ..........................................286 47227LFR..........................................286 482......................................................140 482N...................................................140 482NC................................................140 483N...................................................140 483NC................................................140 49101 .................................................232 49102 .................................................232 49105 .................................................232 49201 .................................................232 49202 .................................................232 49205 .................................................232 49301 .................................................232 49302 .................................................232 49305 .................................................232 49309L ...............................................287 49309LS.............................................287 49312L ...............................................287 49312LS.............................................287 49329L ...............................................287 49329LS.............................................287 49331L ...............................................287 49331LS.............................................287 50207L ...............................................287 50207M..............................................287 50208L ...............................................287 50209L ...............................................287 50209LS.............................................287 50209M..............................................287 50209MS ...........................................287 50212L ...............................................287 50212LS.............................................287 510......................................................106 512......................................................106 515......................................................106 516-090-000-301...............................178 516-090-000-302...............................178 322 PHONE: 773 792-2700 INDEX * Please visit the product pages on our website for the most up-to-date product information 913......................................................273 913D...................................................273 9144......................................................30 921.............................................245, 276 921K ..........................................245, 276 923......................................................273 923D...................................................273 9244......................................................30 933......................................................273 933D...................................................273 951......................................................273 952......................................................273 953......................................................273 961......................................................273 962......................................................273 963......................................................273 97GV***..............................................244 982A01R............................................269 982A03R............................................269 982A06R............................................269 99GD0726 .........................................244 99GV***..............................................244 A1600.................................................212 A1632B ..............................................212 A1634B ..............................................212 A3F......................................................4-5 A3F01.....................................................5 A3F02.....................................................5 A3F03.....................................................5 A3F04.....................................................5 A3F05.....................................................5 A3F06.....................................................5 A3F07.....................................................5 A3F08.....................................................5 A3F09.....................................................5 A3FB.......................................................4 A3FBAU .................................................4 A3FD ......................................................4 A3FL.......................................................4 A3FS.......................................................4 A3M.....................................................4-5 A3M01....................................................5 A3M02....................................................5 A3M03....................................................5 A3M04....................................................5 A3M05....................................................5 A3M06....................................................5 A3M07....................................................5 A3M08....................................................5 A3M09....................................................5 A3MB......................................................4 A3MBAU ................................................4 A3ML ......................................................4 A3MS......................................................4 A4F .........................................................4 A4FB.......................................................4 A4FBAU .................................................4 A4FD ......................................................4 A4FL.......................................................4 A4M ........................................................4 A4MB......................................................4 A4MBAU ................................................4 A4ML ......................................................4 A591...................................................317 A592...................................................317 A593...................................................317 A594...................................................317 A595...................................................317 A596...................................................317 A598...................................................317 A5F .........................................................4 A5FB.......................................................4 A5FBAU .................................................4 A5FD ......................................................4 A5FL.......................................................4 A5M ........................................................4 A5MB......................................................4 A5MBAU ................................................4 A5ML ......................................................4 A6501.................................................312 A6502.................................................312 A6503.................................................312 A6504.................................................312 A6505.................................................312 A6508.................................................312 A6F .........................................................4 A6FB.......................................................4 A6FBAU .................................................4 A6M ........................................................4 A6MBAU ................................................4 A7F .........................................................4 A7FB.......................................................4 A7FBAU .................................................4 A7M ........................................................4 A7MBAU ................................................4 AA3F.......................................................4 AA3FB....................................................4 AA3FBAU...............................................4 AA3FD....................................................4 AA3FL ....................................................4 AA3FLD..................................................4 AA3M......................................................4 AA3MB ...................................................4 AA3MBAU..............................................4 AA3ML....................................................4 AA4F.......................................................4 AA4FB....................................................4 AA4FD....................................................4 AA4FL ....................................................4 AA4M......................................................4 AA4ML....................................................4 AA5F.......................................................4 AA5FB....................................................4 AA5FD....................................................4 AA5FL ....................................................4 AA5M......................................................4 AA5MB ...................................................4 AA5ML....................................................4 AA6F.......................................................4 AA6FB....................................................4 AA6FD....................................................4 AA6FL ....................................................4 AA6M......................................................4 AA6ML....................................................4 AA7F.......................................................4 AA7FB....................................................4 AA7FD....................................................4 AA7FL ....................................................4 AA7M......................................................4 AA7ML....................................................4 AAA*F.....................................................6 AAA*M....................................................6 AD1600..............................................212 AD1632B ...........................................212 AD1634..............................................212 AQGP322...............................................4 AQGP323...............................................4 B1600.................................................212 B1632B ..............................................212 B1634B ..............................................212 B1650.................................................212 B1700.................................................212 B1795.................................................212 B1796.................................................212 B3F.......................................................10 B3FB ....................................................10 B3M ......................................................10 B3MB....................................................10 B4F.......................................................10 B4M ......................................................10 B5F.......................................................10 B5M ......................................................10 www.switchcraft.com B6F.......................................................10 B6M ......................................................10 B7F.......................................................10 B7M ......................................................10 BD1600..............................................212 BD1632B ...........................................212 BD1634B ...........................................212 BD1650..............................................212 BD1700..............................................212 BD1795..............................................212 BD1796..............................................212 BPJF01 ..............................................123 BPJF01AU.........................................123 BPJF02 ..............................................123 BPJF02AU.........................................123 BPJF03 ..............................................123 BPJF03AU.........................................123 BPJF04 ..............................................123 BPJF04AU.........................................123 BPJF05 ..............................................123 BPJF05AU.........................................123 BPJF06 ..............................................123 BPJF06AU.........................................123 BPJJ01...............................................123 BPJJ01AU .........................................123 BPJJ02...............................................123 BPJJ02AU .........................................123 BPJJ03...............................................123 BPJJ03AU .........................................123 BPJJ04...............................................123 BPJJ04AU .........................................123 BPJJ05...............................................123 BPJJ05AU .........................................123 BPJJ06...............................................123 BPJJ06AU .........................................123 BPJR01..............................................123 BPJR01AU.........................................123 BPJR02..............................................123 BPJR02AU.........................................123 BPJR03..............................................123 BPJR03AU.........................................123 BPJR04..............................................123 BPJR04AU.........................................123 BPJR05..............................................123 BPJR05AU.........................................123 BPJR06..............................................123 BPJR06AU.........................................123 BXR011..............................................272 BXR0110 ...........................................272 BXR011PC ........................................272 BXR013..............................................272 BXR013P...........................................272 BXR016..............................................272 BXR016P...........................................272 BXR021..............................................272 BXR0210 ...........................................272 BXR021PC ........................................272 BXR023..............................................272 BXR023P...........................................272 BXR026..............................................272 BXR026PC ........................................272 BXR03................................................272 BXR0310 ...........................................272 BXR0310PC......................................272 BXR031PC ........................................272 BXR033..............................................272 BXR033PC ........................................272 BXR036..............................................272 BXR036PC ........................................272 BXR051..............................................272 BXR0510 ...........................................272 BXR051PC ........................................272 BXR053..............................................272 BXR053PC ........................................272 BXR056..............................................272 BXR056PC ........................................272 C11.......................................................94 C12A ....................................................94 C12B ....................................................94 C1600.................................................212 C1634B..............................................212 C240...................................................145 C245...................................................145 C270...................................................145 C3F.......................................................10 C3M......................................................10 C46203LR..........................................284 C46204MR ........................................284 C46206LFR .......................................284 C46206LR..........................................284 C4F.......................................................10 C4M......................................................10 C55B ..................................................109 C56206L1 ..........................................288 C56206L2 ..........................................288 C56313L1 ..........................................289 C56313L2 ..........................................289 C5F.......................................................10 C5M......................................................10 C62206L ............................................290 C63212L ............................................290 C6F.......................................................10 C6M......................................................10 C7F.......................................................10 C7M......................................................10 CB3F ....................................................65 CB3M ...................................................65 CD1600..............................................212 CD1634B ...........................................212 CMT331 ...............................................83 CMT332 ...............................................83 CMT332A.............................................83 CMT332B.............................................83 CMT332C ............................................84 CMT333 ...............................................83 CMT333A.............................................83 CMT333B.............................................84 CMT334-B ...........................................83 CMT334A.............................................83 CMT334C ............................................83 CMT334E.............................................83 CMT334F.............................................83 CMT335 ...............................................83 CMT335A.............................................84 CMT336 ...............................................83 CMT336A.............................................83 CMT336B.............................................83 CMT336C ............................................83 CMT336D ............................................83 CMT336E.............................................83 CMT337 ...............................................83 CMT338 ...............................................83 CMT339 ...............................................83 CMT341 ...............................................84 CMT342B.............................................84 CMT344B.............................................84 CMT346 ...............................................83 CMT346C ............................................84 CMT351C ............................................83 CMT354F.............................................83 CMT356C ............................................83 CMT358 ...............................................83 CMT359 ...............................................83 CN11 ..................................................109 CN12A ...............................................109 CN12B ...............................................109 CN13B ...............................................109 CPC102A...........................................263 CPC102D...........................................263 CPC102F...........................................263 CPC102K...........................................263 CPC102N...........................................263 (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery 323 FAX: 773 792-2129 * Please visit the product pages on our website for the most up-to-date product information DW3 ...................................................311 DW301 ...............................................310 DW302 ...............................................310 DW303 ...............................................310 DW304 ...............................................310 DW305 ...............................................310 DW308 ...............................................310 DW312 ...............................................310 DW313 ...............................................310 DW316 ...............................................310 DW4 ...................................................311 DW41 .................................................310 DW43 .................................................310 DW44 .................................................310 DW45 .................................................310 DW47 .................................................310 DW48 .................................................310 DW7 ...................................................311 E*F........................................................12 E*M.......................................................12 E111L.................................................107 E112BL ..............................................107 E591...................................................317 E592...................................................317 E594...................................................317 E595...................................................317 E596...................................................317 E598...................................................317 E903...................................................276 E903D ................................................276 E913...................................................276 E913D ................................................276 EAC225................................................71 EAC227................................................70 EAC233................................................70 EAC233S .............................................70 EAC305................................................70 EAC309................................................70 EAC311................................................70 EAC315................................................70 EAC319................................................70 EAC323................................................70 EAC325................................................70 EAC327................................................70 EAC333................................................70 EAC333S .............................................70 EAC405................................................70 EAC409................................................70 EAC411................................................70 EAC413................................................70 EAC451................................................70 EAC453................................................70 EAC455................................................70 EAC457................................................70 ED903 ................................................276 ED903D .............................................276 ED913 ................................................276 ED913D .............................................276 EH13942..............................................16 EHBNC2 ..............................................16 EHBNCSC ...........................................16 EHCAT62 .............................................16 EHRCA2 ..............................................16 EHRCABNC ........................................16 EHUSB2...............................................16 EN3C**.................................................43 EN3CR.................................................42 EN3CRAUTO ......................................42 EN3I**...................................................45 EN3INS16............................................42 EN3INS20............................................42 EN3P** .................................................44 EN3POS16 ..........................................42 EN3POS20 ..........................................42 EP903 ................................................276 EP903D..............................................276 EP913 ................................................276 EP913D..............................................276 EPS1PC1...........................................291 EPS1PC2...........................................291 EPS1PC3...........................................291 EPS1SL1 ...........................................291 EPS2PC1...........................................291 EPS2PC2...........................................291 EPS2PC3...........................................291 EPS3PC1...........................................291 EPS3PC2...........................................291 EPS3PC3...........................................291 EPS3SL1 ...........................................291 EPS4PC1...........................................291 EPS4PC2...........................................291 EPS4PC3...........................................291 F3FRAF ...............................................23 F3FSTF................................................23 F3MRAF...............................................23 F3SM3F ...............................................23 FA11 .....................................................94 FAL11 ...................................................94 G3MS ...................................................26 G4MS ...................................................26 G6083 ................................................296 G6084 ................................................296 H101...................................................275 H101PC .............................................275 H102...................................................275 H102PC .............................................275 H103...................................................275 H103D................................................275 H103PC .............................................275 H201...................................................275 H201PC .............................................275 H202...................................................275 H202PC .............................................275 H203...................................................275 H203D................................................275 H203PC .............................................275 H3MS ...................................................26 H4MS ...................................................26 HP75BNC1 ..........................................66 HP75BNC10........................................66 HP75BNC12........................................66 HP75BNC2 ..........................................66 HP75BNC6 ..........................................66 HP75BNC7 ..........................................66 HP75BNC9 ..........................................66 HPCC4F...............................................38 HPCC4FRA .........................................38 HPCI4F ................................................38 HPCP*4................................................40 HPCPK112F......................................190 HPCPK112F1....................................190 HPCPK1B..........................................190 HPCPK324F......................................190 HPCPK324F1....................................190 HPCPK3B..........................................190 IBS10B02106AR...............................314 IBS10B04106AR...............................314 IBS10B06106AR...............................314 IBS10B08106AR...............................314 IBS10B10106AR...............................314 IBS10B12106AR...............................314 IBS15B02106AR...............................314 IBS15B04106AR...............................314 IBS15B06106AR...............................314 IBS15B08106AR...............................314 IBS15B10106AR...............................314 IBS15B12106AR...............................314 IBS20B02106AR...............................314 IBS20B04106AR...............................314 IBS20B06106AR...............................314 IBS20B08106AR...............................314 IBS20B10106AR...............................314 SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 IBS20B12106AR...............................314 J3FS .....................................................26 J4MS ....................................................26 JP012000...........................................207 JP012S32A........................................207 JP012S32B1 .....................................207 JP012S34B1 .....................................207 JP022000...........................................207 JP022S32A........................................207 JP022S32B........................................207 JP022S34B........................................207 JP032000...........................................207 JP032S32A........................................207 JP032S32B........................................207 JP032S34B........................................207 JP042000...........................................207 JP042S32A........................................207 JP042S32B........................................207 JP042S34B........................................207 JP052000...........................................207 JP052S32A........................................207 JP052S32B........................................207 JP052S34B........................................207 JP062000...........................................207 JP062S32A........................................207 JP062S32B........................................207 JP062S34B........................................207 JP072000...........................................207 JP072S32A........................................207 JP072S32B........................................207 JP072S34B........................................207 JP082000...........................................207 JP082S32A........................................207 JP082S32B........................................207 JP082S34B........................................207 JP092000...........................................207 JP092S32A........................................207 JP092S32B........................................207 JP092S34B........................................207 JP102000...........................................207 JP102S32A........................................207 JP102S32B........................................207 JP102S34B........................................207 JP112000...........................................207 JP112S32A........................................207 JP112S32B........................................207 JP112S34B........................................207 JP122000...........................................207 JP122S32A........................................207 JP122S32B........................................207 JP122S34B........................................207 JP312000...........................................210 JP322000...........................................210 JP9902...............................................207 JP9922...............................................207 JP9942...............................................207 JPD312000........................................210 JPD322000........................................210 K131...................................................296 K255 .......................................................5 K3FS ....................................................26 K459...................................................163 K460...................................................163 K4FS ....................................................26 L11........................................................94 L112A...................................................98 L112APC..............................................98 L112B...................................................98 L113B...................................................98 L114B...................................................98 L114BPC..............................................98 L12A .....................................................94 L12B .....................................................94 L3MN....................................................30 L4MN....................................................30 L5MN....................................................30 INDEX CPC102R...........................................263 CPC102T...........................................263 CPC102U...........................................263 D1600.................................................212 D1632A..............................................212 D1632B..............................................212 D1634B..............................................212 D1700.................................................212 D1789.................................................212 D3F.........................................................9 D3FB ......................................................9 D3FBAU .................................................9 D3FD ......................................................9 D3FDB....................................................9 D3M........................................................9 D3MB .....................................................9 D3MBAU ................................................9 D4F.........................................................9 D4FB ......................................................9 D4FBAU .................................................9 D4M........................................................9 D4MB .....................................................9 D4MBAU ................................................9 D5F.........................................................9 D5FB ......................................................9 D5FBAU .................................................9 D5M........................................................9 D5MB .....................................................9 D5MBAU ................................................9 D6F.........................................................9 D6FB ......................................................9 D6FBAU .................................................9 D6FDB....................................................9 D6M........................................................9 D6MB .....................................................9 D6MBAU ................................................9 D7F.........................................................9 D7FB ......................................................9 D7FBAU .................................................9 D7M........................................................9 D7MB .....................................................9 D7MBAU ................................................9 DA013 ................................................275 DA023 ................................................275 DA033 ................................................275 DA043 ................................................275 DA053 ................................................275 DA083 ................................................275 DMD*FRA***........................................53 DS301 ................................................236 DS302 ................................................236 DS303 ................................................236 DS306 ................................................236 DS307 ................................................236 DS308 ................................................236 DS311 ................................................237 DS312 ................................................237 DS313 ................................................237 DS316 ................................................236 DS317 ................................................236 DS318 ................................................236 DS321 ................................................238 DS322 ................................................238 DS323 ................................................238 DS350 ................................................238 DS351 ................................................238 DS352 ................................................238 DS353 ................................................238 DUSB ...................................................56 DW05 .................................................311 DW1 ...................................................311 DW101 ...............................................311 DW102 ...............................................311 DW201 ...............................................311 DW202 ...............................................311 DW205 ...............................................311 324 PHONE: 773 792-2700 INDEX * Please visit the product pages on our website for the most up-to-date product information L712A.................................................134 L712RA..............................................134 L722A.................................................134 L722RA..............................................134 LUS001..............................................271 LUS001PC.........................................271 LUS001ST .........................................271 M111 ....................................................97 M112A..................................................97 M112APC ............................................97 M112B..................................................97 M112BPC ............................................97 M113B..................................................97 M113E..................................................97 M113PPC1M.......................................97 M114B..................................................97 M114BPC ............................................97 M114BPC1M.......................................97 M3M .....................................................30 M4M .....................................................30 M5M .....................................................30 MBPK175T ........................................201 MD10..................................................249 MD15..................................................249 MD3....................................................249 MD6....................................................249 MDPC2A............................................121 MDPC2AR.........................................121 MDPC2ARA ......................................121 MDSL2A ............................................121 MDSL2ARA.......................................121 MDSMT2ARATR...............................120 MDSMT2BRATR...............................120 MDSMT3BRATR...............................120 MDSMT4BRATR...............................120 ML112B................................................97 MN111..................................................97 MN112A...............................................97 MN112APC..........................................97 MN112B...............................................97 MN112BPC..........................................97 MN113B...............................................97 MN113BPC..........................................97 MN113E...............................................97 MN114B...............................................97 MN114BPC..........................................97 MN122A...............................................97 MNL112B.............................................97 MNL113B.............................................97 MT331 ..................................................83 MT332 ..................................................83 MT332A ...............................................83 MT332B ...............................................83 MT332C ...............................................83 MT333 ..................................................83 MT333A ...............................................84 MT333B ...............................................83 MT333E ...............................................83 MT334A ...............................................83 MT334B ...............................................83 MT334C ...............................................83 MT334E ...............................................83 MT334F................................................83 MT335 ..................................................83 MT335A ...............................................84 MT336 ..................................................83 MT336A ...............................................83 MT336B ...............................................83 MT336C ...............................................83 MT336D ...............................................83 MT336E ...............................................83 MT337 ..................................................83 MT338 ..................................................83 MT339 ..................................................83 MT342B ...............................................83 MT343B ...............................................84 MT344B ...............................................83 MT346 ..................................................83 MT346A ...............................................84 MT346B ...............................................84 MT346C ...............................................84 MT352A ...............................................83 MT354B ...............................................83 MT355 ..................................................83 MT356C ...............................................83 MT357 ..................................................83 MT388 ..................................................85 MT389 ..................................................85 MT48FN.............................................184 MT48HN ............................................184 MT48K1FN ........................................182 MT48K1HN........................................182 MT48K1NN........................................182 MT48K1NS........................................182 MT48K3FN ........................................182 MT48K3HN........................................182 MT48K3NN........................................182 MT48NN ............................................184 MT48NS.............................................184 MT52FN.............................................184 MT52HN ............................................184 MT52K1FN ........................................182 MT52K1HN........................................182 MT52K1NN........................................182 MT52K1NS........................................182 MT52K3FN ........................................182 MT52K3HN........................................182 MT52K3NN........................................182 MT52NN ............................................184 MT52NS.............................................184 MTP24K7...........................................174 MTP48K1NO.....................................166 MTP48K1NS .....................................166 MTP48K3BPNS ................................174 MTP48K3NO.....................................166 MTP48K3NS .....................................166 MTP48K3PBNO................................174 MTP48K3SNO ..................................166 MTP52K3BPNO................................174 MTPFA48K1NO ................................164 MTPFA48K1NS.................................164 MTPH48K1NO ..................................171 MTPH48K1NS...................................171 MTPH48K3NO ..................................171 MTPH48K3NS...................................171 MTPH48K3SNO ...............................171 MVJ*75T ............................................137 MVJ*NT..............................................137 MVP32K1*75T ..................................196 MVP32K1*NT....................................196 MVP32K3*75T ..................................196 MVP32K3*NT....................................196 N111.....................................................98 N111PC ...............................................98 N111PCS...........................................100 N112A ..................................................98 N112APC.............................................98 N112APCS ........................................100 N112B ..................................................98 N112BPC.............................................98 N112BPCS ........................................100 N113.....................................................98 N113B ..................................................98 N113BPC.............................................98 N113BPCS ........................................100 N114B ..................................................98 N114BPC.............................................98 N114BPCS ........................................100 N3MS ...................................................25 NL111...................................................98 NL112A ................................................98 NL112B ................................................98 www.switchcraft.com NL113B ................................................98 NL114B ................................................98 NL114BPC...........................................98 NL114BPCS......................................100 P2290.................................................230 P2315.................................................230 P2316.................................................230 P23491...............................................271 P234913.............................................271 P23492...............................................271 P23493...............................................271 P23494...............................................271 P23495...............................................271 P23497...............................................271 P23498...............................................271 P2456.................................................230 P286301...............................................91 P286302...............................................91 P286304...............................................91 P286305...............................................91 P286307...............................................91 P286308...............................................91 P286401...............................................91 P286402...............................................91 P286404...............................................91 P286405...............................................91 P286407...............................................91 P286408...............................................91 P2912.................................................297 P2936 ........................................270, 314 P2937 ........................................270, 314 P2938 ........................................270, 314 P2939 ........................................270, 314 P2940 ........................................270, 314 P2941 ........................................270, 314 P2942 ........................................270, 314 P2943 ........................................270, 314 P2951 ........................................270, 314 P2952 ........................................270, 314 P2953 ........................................270, 314 P2954 ........................................270, 314 P2955 ........................................270, 314 P2956 ........................................270, 314 P2957 ........................................270, 314 P2958 ........................................270, 314 P2979.................................................314 P2992.................................................314 P3F .........................................................8 P3M ........................................................8 P4F .........................................................8 P4M ........................................................8 P5F .........................................................8 P5M ........................................................8 PC12A..................................................94 PC142A..............................................110 PC712A..............................................134 PC722A..............................................134 PC732A..............................................134 PCL712A ...........................................134 PCL722A ...........................................134 PD3F***................................................20 PD3M***...............................................20 PJRAN1X1U01 .................................126 PJRAN1X1U02 .................................126 PJRAN1X1U03 .................................126 PJRAN1X1U04 .................................126 PJRAN2X1U01 .................................126 PJRAN2X1U02 .................................126 PJRAN3X1U01 .................................126 PJRAN3X1U02 .................................126 PJRAS1X1S01..................................126 PJRAS1X1S02..................................126 PJRAS1X1S03..................................126 PJRAS1X1S04..................................126 PJRAS1X2S01..................................126 PJRAS1X2S02..................................126 PJRAS1X3S01..................................126 PJRAS1X3S02..................................126 PJRAS1X3U01..................................126 PJRAS2X1S01..................................126 PJRAS2X1S02..................................126 PJRAS2X2S01..................................126 PJRAS3X1S01..................................126 PJRAS3X1S02..................................126 PJRAS3X2S01..................................126 PJRAS3X2S02..................................126 PJRAS4X2U01..................................126 PL102.................................................278 PL103205 ..........................................277 PL103705 ..........................................277 PL106205 ..........................................277 PL106705 ..........................................277 PL111.................................................278 PL112205 ..........................................277 PL112705 ..........................................277 PL123705 ..........................................277 PL126205 ..........................................277 PL126705 ..........................................277 PL202.................................................278 PL203205 ..........................................277 PL203705 ..........................................277 PL206205 ..........................................277 PL206705 ..........................................277 PL211.................................................278 PL212205 ..........................................277 PL212705 ..........................................277 PL226205 ..........................................277 PL226705 ..........................................277 PL303.................................................278 PL305.................................................278 PL308.................................................278 PL403205 ..........................................277 PL403705 ..........................................277 PL406205 ..........................................277 PL406705 ..........................................277 PL412205 ..........................................277 PL412705 ..........................................277 PL501.................................................278 PL503.................................................278 PL503205 ..........................................277 PL504.................................................278 PL505.................................................278 PL506205 ..........................................277 PL506705 ..........................................277 PL508.................................................278 PL512.................................................278 PL512205 ..........................................277 PL512705 ..........................................277 PL513.................................................278 PL703705 ..........................................277 PL706205 ..........................................277 PL706705 ..........................................277 PL712205 ..........................................277 PL712705 ..........................................277 PL803205 ..........................................277 PL803705 ..........................................277 PL806205 ..........................................277 PL806705 ..........................................277 PL812205 ..........................................277 PL812705 ..........................................277 PL9105...............................................278 PL9205...............................................278 PPT ....................................................163 PQG3F***.............................................18 PQG3M***............................................18 PT1LA ................................................163 PT2B ..................................................163 QG3F....................................................25 QG3FD.................................................25 QG3FDPC ...........................................25 QG3M...................................................25 QG4F....................................................25 (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery 325 FAX: 773 792-2129 * Please visit the product pages on our website for the most up-to-date product information RA760 ................................................241 RA765 ................................................241 RA850 ................................................253 RAPC322.............................................78 RAPC712...........................................130 RAPC722...........................................130 RAPC732...........................................130 RAPC732OF .....................................130 RAPC742...........................................130 RAPC742OF .....................................130 RAPC752...........................................130 RAPC752S ........................................130 RASH712...........................................130 RASH722...........................................130 RASH732...........................................130 RASM712 ..........................................130 RASM722 ..........................................130 RASM732 ..........................................130 RASM742TR .....................................130 RASM752STR...................................130 RASM752TR .....................................130 RN111PC...........................................103 RN112APC........................................103 RN112BPC........................................103 RN113BPC........................................103 RN113FPC ........................................103 RN114BPC........................................103 RS422H48N081................................191 RS422H4N081..................................192 RS422H4N161..................................191 RS422H4N162 ..........................191-192 RS422H4N242 ..........................191-192 RS422PH4N081........................191-192 RS422PH4N161 ...............................191 RS422PH4N162........................191-192 RS422PH4N242........................191-192 RS422PV4N081........................191-192 RS422PV4N161................................191 RS422PV4N162........................191-192 RS422PV4N242........................191-192 RS422PV4N322........................191-192 RS422V4N081...........................191-192 RS422V4N161 ..................................191 RS422V4N162...........................191-192 RS422V4N242...........................191-192 RS422V4N322...........................191-192 RTT34B01............................................91 RTT34B02............................................91 RTT34B04............................................91 RTT34B05............................................91 RTT34B07............................................91 RTT34B08............................................91 RTT8701 ..............................................91 RTT8702 ..............................................91 RTT8704 ..............................................91 RTT8705 ..............................................91 RTT8707 ..............................................91 RTT8708 ..............................................91 S11 .......................................................94 S112BPC .............................................98 S112BPCS ........................................100 S12A.....................................................94 S12B.....................................................94 S13B.....................................................94 S230...................................................153 S250...................................................151 S260...................................................151 S267...................................................151 S280 ..........................................146, 151 S3F5M..................................................29 S3FM....................................................28 S4FM....................................................28 S580...................................................146 S5F3M..................................................29 S5FM....................................................28 S760...................................................162 S760K ................................................162 S761K ................................................162 S765...................................................162 S765K ................................................162 S766K ................................................162 S830...................................................108 SL01 .....................................................61 SL02 .....................................................61 SL03 .....................................................61 SL04 .....................................................61 SL05................................................61-62 SL102F.................................................63 SL102M................................................63 SL103F.................................................63 SL103M................................................63 SL104F.................................................63 SL104M................................................63 SL105F.................................................63 SL105M................................................63 SL172F.................................................63 SL173F.................................................63 SL173M................................................63 SL174F.................................................63 SL174M................................................63 SL175F.................................................63 SL175M................................................63 SL18 .....................................................64 SL182F.................................................64 SL182M................................................64 SL183F.................................................64 SL183M................................................64 SL184F.................................................64 SL184M................................................64 SL185F.................................................64 SL185M................................................64 SL402F.................................................62 SL402M................................................62 SL403F.................................................62 SL403M................................................62 SL404F.................................................62 SL404M................................................62 SL405F.................................................62 SL405M................................................62 SL412F.................................................62 SL413F.................................................62 SL413M................................................62 SL414F.................................................62 SL414M................................................62 SL415F.................................................62 SL415M................................................62 SMD*FRA***........................................53 SN37A11 ...........................................103 SN37A12A.........................................103 SN37A12B.........................................103 SN37A14B.........................................103 SN49A11 ...........................................103 SN49A12A.........................................103 SN49A12B.........................................103 SN49A14B.........................................103 SN49B11 ...........................................103 SN49B12A.........................................103 SN49B12B.........................................103 SN49B14B.........................................103 SN49C11 ...........................................103 SN49C12A.........................................103 SN49C12B.........................................103 SN49C14B.........................................103 SN70B11 ...........................................103 SN70B12A.........................................103 SN70B12B.........................................103 SN70B14B.........................................103 SN70C11 ...........................................103 SN70C12A.........................................103 SN70C12B.........................................103 SN70C14B.........................................103 SR00.......................................................5 SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 SR01.......................................................5 SR02.......................................................5 SR03.......................................................5 SR04.......................................................5 SR05.......................................................5 SR06.......................................................5 SR07.......................................................5 SR08.......................................................5 SR09.......................................................5 ST121.................................................257 ST125.................................................256 ST131.................................................257 ST200.................................................257 ST230.................................................257 ST303.................................................247 ST304.................................................247 ST305.................................................247 ST306.................................................247 ST307.........................................246-247 ST308.................................................247 ST309.................................................247 ST323.................................................247 ST324.........................................246-247 ST325.................................................247 ST326.................................................247 ST327.................................................247 ST328.................................................247 ST329.................................................247 ST35...................................................255 ST40...................................................255 ST60...................................................255 ST600.................................................250 ST603.................................................250 ST604.................................................250 ST605.................................................250 ST626.................................................250 ST700.................................................254 ST710.................................................254 ST740.................................................254 ST750.................................................254 ST760.................................................241 ST765.................................................241 ST850.................................................253 ST90...................................................258 ST900.................................................245 ST900F ..............................................245 ST91...................................................258 SUSB....................................................56 T127410.............................................297 T12742...............................................297 T12745...............................................297 T3F .........................................................9 T3FL .......................................................9 T3FLM....................................................9 T3FM ......................................................9 T4F .........................................................9 T4FL .......................................................9 T4FLM....................................................9 T4FM ......................................................9 TA01 .....................................................31 TA02 .....................................................31 TA03 .....................................................31 TA04 .....................................................31 TA05 .....................................................31 TA06 .....................................................31 TA3F................................................31-32 TA3FB...................................................32 TA3FL...................................................32 TA3FLB ................................................32 TA3M...............................................31-32 TA3MB..................................................32 TA3ML ..................................................32 TA4F .....................................................32 TA4FB...................................................32 TA4FL...................................................32 TA4FLB ................................................32 INDEX QG4FD.................................................25 QG4M...................................................25 QG5F....................................................25 QG5FD.................................................25 QG5M...................................................25 QG6F....................................................25 QG6FD.................................................25 QG6M...................................................25 QG7F....................................................25 QG7FD.................................................25 QG7M...................................................25 QGP322 .................................................4 QGP323 .................................................4 QGP326...............................................10 QGP327...............................................10 QGP362 .................................................9 QGP363 .................................................9 QGPK116FB .....................................188 QGPK116MB ....................................188 QGPK18M8FB ..................................188 QGPK1B............................................188 QGPK332MFB ..................................188 QGPK3B............................................188 R3FZ.......................................................8 R3MZ......................................................8 R4FZ.......................................................8 R4MZ......................................................8 R5FZ.......................................................8 R5MZ......................................................8 R6FZ.......................................................8 R6MZ......................................................8 R7FZ.......................................................8 R7MZ......................................................8 RA200 ................................................256 RA202 ................................................257 RA205 ................................................256 RA207 ................................................257 RA208 ................................................257 RA217 ................................................257 RA35 ..................................................255 RA353 ................................................247 RA354 ................................................247 RA355 ................................................247 RA356.........................................246-247 RA357 ................................................247 RA358 ................................................247 RA359 ................................................247 RA373 ................................................247 RA374.........................................246-247 RA375 ................................................247 RA376 ................................................247 RA377 ................................................247 RA378 ................................................247 RA379 ................................................247 RA40 ..................................................255 RA41 ..................................................255 RA49B11 ...........................................103 RA49B12A.........................................103 RA49B12B.........................................103 RA49B14B.........................................103 RA49C11 ...........................................103 RA49C12A.........................................103 RA49C12B.........................................103 RA49C14B.........................................103 RA700 ................................................254 RA70B11 ...........................................103 RA70B12A.........................................103 RA70B12B.........................................103 RA70B14B.........................................103 RA70C11 ...........................................103 RA70C12A.........................................103 RA70C12B.........................................103 RA70C14B.........................................103 RA710 ................................................254 RA712A..............................................241 RA722A..............................................241 326 PHONE: 773 792-2700 INDEX * Please visit the product pages on our website for the most up-to-date product information TA4M ....................................................32 TA4MB..................................................32 TA4ML ..................................................32 TA5F .....................................................32 TA5FL...................................................32 TA5FLB ................................................32 TA5M ....................................................32 TA5ML ..................................................32 TA5MLB................................................32 TA6FL...................................................32 TA6ML ..................................................32 TA7FL...................................................32 TA7ML ..................................................32 TA8FL...................................................32 TA8ML ..................................................32 TAD2...................................................142 TAD3...................................................142 TB3M....................................................33 TB3MB .................................................33 TB4M....................................................33 TB4MB .................................................33 TB5M....................................................33 TB5MB .................................................33 TB6M....................................................33 TB7M....................................................33 TB8M....................................................33 TBA03 ..................................................37 TBA04 ..................................................37 TBA05 ..................................................37 TBA06 ..................................................37 TLP4.....................................................33 TLP6.....................................................33 TQG3F .................................................37 TQG3M ................................................37 TQG4F .................................................37 TQG4M ................................................37 TQG5F .................................................37 TQG5M ................................................37 TQG6F .................................................37 TQG6M ................................................37 TR1PC ...............................................121 TR2A ..................................................121 TRA**M ................................................34 TRA3M.................................................34 TRA6M.................................................34 TRA6MF...............................................34 TRG4M ................................................33 TRGS4F...............................................33 TT** ....................................................267 TT101.................................................265 TT102.................................................265 TT103.................................................265 TT104.................................................265 TT105.................................................265 TT106.................................................265 TT107.................................................265 TT108.................................................265 TT109.................................................265 TT110.................................................265 TT111.................................................265 TT112.................................................265 TT113.................................................265 TT114.................................................265 TT115.................................................265 TT121.................................................265 TT122.................................................265 TT123.................................................265 TT124.................................................265 TT125.................................................265 TT126.................................................265 TT127.................................................265 TT128.................................................265 TT129.................................................265 TT130.................................................265 TT131.................................................265 TT132.................................................265 TT133.................................................265 TT134.................................................265 TT135.................................................265 TT141.................................................265 TT142.................................................265 TT143.................................................265 TT144.................................................265 TT145.................................................265 TT146.................................................265 TT147.................................................265 TT148.................................................265 TT149.................................................265 TT150.................................................265 TT151.................................................265 TT152.................................................265 TT153.................................................265 TT154.................................................265 TT155.................................................265 TT161.................................................265 TT162.................................................265 TT163.................................................265 TT164.................................................265 TT165.................................................265 TT166.................................................265 TT167.................................................265 TT168.................................................265 TT169.................................................265 TT170.................................................265 TT171.................................................265 TT172.................................................265 TT173.................................................265 TT174.................................................265 TT175.................................................265 TT201.................................................234 TT202.................................................234 TT203.................................................234 TT204.................................................234 TT205.................................................234 TT206.................................................234 TT207.................................................234 TT208.................................................234 TT209.................................................234 TT210.................................................234 TT251.................................................143 TT252.................................................143 TT253 ..........................................90, 143 TT253N..............................................143 TT253NC ...........................................143 TT254.................................................143 TT254N..............................................143 TT254NC ...........................................143 TT261.................................................144 TT263 ..........................................90, 144 TT281.................................................265 TT282.................................................265 TT283.................................................265 TT284.................................................265 TT289.................................................265 TT2W48MCF1...................................223 TT2W48MCN1 ..................................223 TT2W48VCF1 ...................................223 TT2W48VCN1...................................223 TT30 .....................................................87 TT30FM ...............................................87 TT31 .....................................................87 TT31DC ...............................................87 TT31FM ...............................................87 TT31FMDC..........................................87 TT32A...................................................87 TT32ADC.............................................87 TT32AFM.............................................87 TT32AFMDC .......................................87 TT32B...................................................87 TT32BDC.............................................87 TT32BFM.............................................87 TT32BFMDC .......................................87 www.switchcraft.com TT32C ..................................................87 TT32CDC.............................................87 TT32CFM.............................................87 TT32CFMDC.......................................87 TT33 .....................................................87 TT33B...................................................87 TT33BDC.............................................87 TT33BFM.............................................87 TT33BFMDC .......................................87 TT33DC ...............................................87 TT33FM ...............................................87 TT33FMDC..........................................87 TT34A...................................................87 TT34ADC.............................................87 TT34AFM.............................................87 TT34AFMDC .......................................87 TT34B...................................................87 TT34BDC.............................................87 TT34BFM.............................................87 TT34BFMDC .......................................87 TT34C ..................................................87 TT34CDC.............................................87 TT34CFM.............................................87 TT34CFMDC.......................................87 TT34F...................................................87 TT34FDC .............................................87 TT35 .....................................................87 TT35DC ...............................................87 TT35FM ...............................................87 TT35FMDC..........................................87 TT36 .....................................................87 TT36A...................................................87 TT36ADC.............................................87 TT36AFM.............................................87 TT36AFMDC .......................................87 TT36B...................................................87 TT36BDC.............................................87 TT36C ..................................................87 TT36CDC.............................................87 TT36CFM.............................................87 TT36CFMDC.......................................87 TT36DC ...............................................87 TT36FM ...............................................87 TT36FMDC..........................................87 TT401.................................................230 TT403.................................................230 TT404.................................................230 TT405.................................................230 TT408.................................................230 TT413.................................................230 TT4506...............................................230 TT45106.............................................230 TT45124.............................................230 TT45148.............................................230 TT45206.............................................230 TT45224.............................................230 TT45248.............................................230 TT45306.............................................230 TT45324.............................................230 TT45348.............................................230 TT45406.............................................230 TT45424.............................................230 TT45448.............................................230 TT45524.............................................230 TT45548.............................................230 TT45806.............................................230 TT45824.............................................230 TT45848.............................................230 TT4W24MCF1...................................223 TT4W24MCN1 ..................................223 TT4W24VCF1 ...................................223 TT4W24VCN1...................................223 TT501.................................................236 TT502.................................................236 TT503.................................................236 TT504.................................................236 TT505.................................................212 TT506.................................................212 TT507.................................................212 TT508.................................................212 TT509.................................................212 TT51 ..........................................215, 218 TT510 ........................................230, 234 TT5102000 ........................................217 TT5102S31........................................217 TT5102S32A .....................................217 TT5102S32B .....................................217 TT5102S33B .....................................217 TT5102S34B .....................................217 TT5102W31.......................................217 TT5102W32A ....................................217 TT5102W32B ....................................217 TT5102W33B ....................................217 TT5102W34B ....................................217 TT511.................................................212 TT5121...............................................233 TT5122...............................................233 TT5123...............................................233 TT5124...............................................233 TT5125...............................................233 TT5128...............................................233 TT5131...............................................233 TT5132...............................................233 TT5133...............................................233 TT5134...............................................233 TT5135...............................................233 TT5138...............................................233 TT5141...............................................233 TT5142...............................................233 TT5143...............................................233 TT5144...............................................233 TT5145...............................................233 TT5148...............................................233 TT5151...............................................234 TT5152...............................................234 TT5155...............................................234 TT516.................................................237 TT517.................................................237 TT518.................................................237 TT519.................................................236 TT52...................................................218 TT520.................................................236 TT5202000 ........................................217 TT5202S31........................................217 TT5202W34B ....................................217 TT521.................................................236 TT53 ..........................................215, 220 TT5302000 ........................................219 TT5302S95........................................219 TT5302S96........................................219 TT5302W95.......................................219 TT5302W96.......................................219 TT54 ..........................................215, 220 TT5402000 ........................................219 TT5402S95........................................219 TT5402W96.......................................219 TT55 ..........................................215, 218 TT5502S31........................................217 TT5502W34B ....................................217 TT552000 ..........................................217 TT56 ..........................................215, 218 TT5602000 ........................................217 TT5602S31........................................217 TT5602W34B ....................................217 TT57...................................................220 TT58 ..........................................215, 220 TT59 ..........................................215, 220 TT5902000 ........................................219 TT5902S89........................................219 TT5902W89.......................................219 TT60 ..........................................215, 220 TT6002000 ........................................219 (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery 327 FAX: 773 792-2129 * Please visit the product pages on our website for the most up-to-date product information TT91411.............................................216 TT92001.............................................216 TT92002.............................................216 TT92003.............................................216 TT92004.............................................216 TT92005.............................................216 TT92008.............................................216 TT92011.............................................216 TT92201.............................................216 TT92202.............................................216 TT92203.............................................216 TT92204.............................................216 TT92205.............................................216 TT92208.............................................216 TT92211.............................................216 TT92401.............................................216 TT92402.............................................216 TT92403.............................................216 TT92404.............................................216 TT92405.............................................216 TT92408.............................................216 TT92411.............................................216 TT93001.............................................216 TT93002.............................................216 TT93003.............................................216 TT93004.............................................216 TT93005.............................................216 TT93008.............................................216 TT93011.............................................216 TT93301.............................................216 TT93302.............................................216 TT93303.............................................216 TT93304.............................................216 TT93305.............................................216 TT93308.............................................216 TT93311.............................................216 TT93601.............................................216 TT93602.............................................216 TT93603.............................................216 TT93604.............................................216 TT93605.............................................216 TT93608.............................................216 TT93611.............................................216 TT95 .....................................................90 TT95DC ...............................................90 TT95FM ...............................................90 TT95FMDC..........................................90 TT96EDACNO...................................178 TT96EDACNS...................................178 TT96FM ...............................................90 TT96FMDC..........................................90 TTD**..................................................267 TTD5102000 .....................................217 TTD5102S31.....................................217 TTD5102W34B .................................217 TTD5202000 .....................................217 TTD520231........................................217 TTD5202W34B .................................217 TTD5302000 .....................................219 TTD5302S95.....................................219 TTD5302W96....................................219 TTD5402000 .....................................219 TTD5402S95.....................................219 TTD5402W96....................................219 TTD5902000 .....................................219 TTD5902S89.....................................219 TTD5902W89....................................219 TTD6002000 .....................................219 TTD6002S89.....................................219 TTD6002W89....................................219 TTEZN*** ...........................................177 TTP96ASFN......................................186 TTP96ASHN......................................186 TTP96ASNN......................................186 TTP96K1FN ......................................180 TTP96K1HN......................................180 TTP96K1NN......................................180 TTP96K3BPNS .................................174 TTP96K3FN ......................................180 TTP96K3HN......................................180 TTP96K3NN......................................180 TTP96K3NS ......................................168 TTP96K5BPNS .................................174 TTPFA96K1NO .................................164 TTPFA96K1NS..................................164 TTPH96K1NO...................................171 TTPH96K1NS ...................................171 TTPH96K3NO...................................171 TTPH96K3NS ...................................171 TY3F.....................................................37 TY3FPC ...............................................37 TY4F.....................................................37 TY4FPC ...............................................37 TY5F.....................................................37 TY5FPC ...............................................37 TYEF01................................................37 TYEF02................................................37 TYEF03................................................37 TYEF04................................................37 TYEF05................................................37 TYEF08................................................37 TYEF11................................................37 UJ1 .......................................................93 UJ2A.....................................................93 UJ2B.....................................................93 UJ4B.....................................................93 US001 ................................................271 US001PC...........................................271 US001ST ...........................................271 VAPK1HD*75T ..........................199-200 VAPK1HD*NT....................................199 VAPK1SD*75T ..................................199 VAPK1SD*NT....................................199 VAPK3HD*75T ..........................199-200 VAPK3HD*NT....................................199 VAPK3SD*75T ..................................199 VAPK3SD*NT....................................199 VJHD*75T..........................................136 VJHD*75TX .......................................195 VJHD*NT ...........................................136 VJHD*NTX.........................................195 VJSD*75T..........................................136 VJSD*75TX .......................................195 VJSD*NT ...........................................136 VJSD*NTX.........................................195 VMAFN ..............................................199 VMP**.................................................266 VMVHD*75T......................................199 VMVHD*NT .......................................199 VMVSD*75T......................................199 VMVSD*NT .......................................199 VP**....................................................266 VPP24K1HD*75T .............................193 VPP24K1HD*NT...............................193 VPP24K1SD*75T..............................193 VPP24K1SD*NT ...............................193 VPP24K3HD*75T .............................193 VPP24K3HD*NT...............................193 VPP24K3SD*75T..............................193 VPP24K3SD*NT ...............................193 VPP26K1HD*75T .............................193 VPP26K1HD*NT...............................193 VPP26K1SD*75T..............................193 VPP26K1SD*NT ...............................193 VPP26K3HD*75T .............................193 VPP26K3HD*NT...............................193 VPP26K3SD*75T..............................193 VPP26K3SD*NT ...............................193 W11003..............................................231 W11003L ...........................................231 W11006..............................................231 W11006L ...........................................231 SWITCHCRAFT, INC. 5555 N. Elston Ave. * Chicago, IL 60630 W11012..............................................231 W11012L ...........................................231 W11203..............................................231 W11203L ...........................................231 W11206..............................................231 W11206L ...........................................231 W11212..............................................231 W11212L ...........................................231 W1332A .............................................203 W1334B .............................................203 W1532A301.......................................203 W1532B301.......................................203 W1534B .............................................203 W1534B301.......................................203 W1632B .............................................212 W1634B .............................................212 W1789................................................212 W2532A .............................................205 W2533B .............................................205 W2732A301.......................................205 W2732B .............................................205 W2732B301.......................................205 W2734B301.......................................205 W2789................................................205 W3M.....................................................25 W4M.....................................................25 WA1634B...........................................212 WAD1634B........................................212 WB1650 .............................................212 WB1795 .............................................212 WB1796 .............................................212 WBD1634B........................................212 WBD1650 ..........................................212 WBD1795 ..........................................212 WC1634B ..........................................212 WCD1634B .......................................212 WCMT331............................................83 WCMT332A.........................................84 WCMT332B.........................................83 WCMT333............................................84 WCMT334B.........................................83 WCMT335............................................84 WCMT335A.........................................84 WCMT336............................................83 WCMT336A.........................................83 WCMT336B.........................................84 WCMT336C.........................................83 WCMT336D.........................................83 WCMT336E.........................................84 WD1632B ..........................................212 WD1634B ..........................................212 WD1789.............................................212 WMT331 ..............................................83 WMT332A............................................84 WMT332B............................................83 WMT332C............................................84 WMT333 ..............................................84 WMT333B............................................84 WMT333E............................................84 WMT334A............................................84 WMT334B............................................83 WMT334C............................................84 WMT334E............................................84 WMT334F............................................84 WMT335 ..............................................84 WMT335A............................................84 WMT336 ..............................................83 WMT336A............................................83 WMT336B............................................84 WMT336C............................................83 WMT336D............................................83 WMT336E............................................84 WMT342B............................................83 WMT344B............................................84 WMT388 ..............................................85 WMT389 ..............................................85 INDEX TT6002S89........................................219 TT6002W89.......................................219 TT61 ..........................................215, 220 TT6102000 ........................................219 TT6102S89........................................219 TT6102W89.......................................219 TT62 ..........................................215, 220 TT6202000 ........................................219 TT6202S89........................................219 TT6202W89.......................................219 TT631...................................................87 TT632A ................................................87 TT632B ................................................87 TT632C ................................................87 TT633...................................................87 TT633B ................................................87 TT634A ................................................87 TT634B ................................................87 TT634C ................................................87 TT635...................................................87 TT636...................................................87 TT636A ................................................87 TT636C ................................................87 TT6W48MCF1...................................223 TT6W48MCN1 ..................................223 TT6W48VCF1 ...................................223 TT6W48VCN1...................................223 TT722.................................................264 TT724.................................................264 TT726.................................................264 TT727.................................................264 TT728.................................................264 TT729.................................................264 TT741.................................................264 TT741N0............................................264 TT742.................................................264 TT742N0............................................264 TT744.................................................264 TT744N0............................................264 TT746.................................................264 TT746N0............................................264 TT747.................................................264 TT747N0............................................264 TT748.................................................264 TT749.................................................264 TT861.................................................264 TT862.................................................264 TT864.................................................264 TT866.................................................264 TT867.................................................264 TT868.................................................264 TT869.................................................264 TT89 .....................................................89 TT89DC ...............................................89 TT89FM ...............................................89 TT89FMDC..........................................89 TT91001.............................................216 TT91002.............................................216 TT91003.............................................216 TT91004.............................................216 TT91005.............................................216 TT91008.............................................216 TT91011.............................................216 TT91201.............................................216 TT91202.............................................216 TT91203.............................................216 TT91204.............................................216 TT91205.............................................216 TT91208.............................................216 TT91211.............................................216 TT91401.............................................216 TT91402.............................................216 TT91403.............................................216 TT91404.............................................216 TT91405.............................................216 TT91408.............................................216 328 PHONE: 773 792-2700 INDEX * Please visit the product pages on our website for the most up-to-date product information WTT31 .................................................87 WTT31DC............................................87 WTT31FM............................................87 WTT31FMDC ......................................87 WTT32A...............................................87 WTT32ADC .........................................87 WTT32AFM .........................................87 WTT32AFMDC....................................87 WTT32B...............................................87 WTT32BDC .........................................87 WTT32BFM .........................................87 WTT32BFMDC....................................87 WTT32C...............................................87 WTT32CDC.........................................87 WTT32CFM.........................................87 WTT32CFMDC ...................................87 WTT33 .................................................87 WTT33B...............................................87 WTT33BDC .........................................87 WTT33BFM .........................................87 WTT33BFMDC....................................87 WTT33DC............................................87 WTT33FM............................................87 WTT33FMDC ......................................87 WTT34A...............................................87 WTT34ADC .........................................87 WTT34AFM .........................................87 WTT34AFMDC....................................87 WTT34B...............................................87 WTT34BDC .........................................87 WTT34BFM .........................................87 WTT34BFMDC....................................87 WTT35 .................................................87 WTT35DC............................................87 WTT35FM............................................87 WTT35FMDC ......................................87 WTT36 .................................................87 WTT36A...............................................87 WTT36ADC .........................................87 WTT36AFM .........................................87 WTT36AFMDC....................................87 WTT36C...............................................87 WTT36CDC.........................................87 WTT36CFM.........................................87 WTT36CFMDC ...................................87 WTT36DC............................................87 WTT36FM............................................87 WTT36FMDC ......................................87 WTT631 ...............................................87 WTT632A.............................................87 WTT632B.............................................87 WTT632C ............................................87 WTT633 ...............................................87 WTT633B.............................................87 WTT634A.............................................87 WTT634B.............................................87 WTT634C ............................................87 WTT635 ...............................................87 WTT636 ...............................................87 WTT636A.............................................87 WTT636C ............................................87 WTT89 .................................................89 WTT89DC............................................89 WTT89FM............................................89 WTT89FMDC ......................................89 WTT95 .................................................90 WTT95DC............................................90 WTT95FM............................................90 WTT95FMDC ......................................90 WTT96FM............................................90 WTT96FMDC ......................................90 X1332A ..............................................203 X1332B ..............................................203 X1334B ..............................................203 X1532A ..............................................203 X1532B301........................................203 X1534B ..............................................203 X1542B315........................................203 X21248...............................................317 X2432A ..............................................205 X2432B ..............................................205 X2434B ..............................................205 X2532A ..............................................205 X2532B ..............................................205 X2534B ..............................................205 X2732A ..............................................205 X2732A301........................................205 X2732B ..............................................205 X2732B301........................................205 X2734B ..............................................205 X2734B301........................................205 X2832A ..............................................205 X2932A ..............................................205 X51248...............................................317 XMT332A.............................................84 XMT332B.............................................84 XMT334B.............................................84 Y21248...............................................317 Y28248...............................................317 Y3F.......................................................22 Y3FD ....................................................22 Y3FPC..................................................22 Y3MPC.................................................22 Y51248...............................................317 YEF01 ..................................................22 YEF02 ..................................................22 YEF03 ..................................................22 YEF04 ..................................................22 YEF05 ..................................................22 YEF08 ..................................................22 YMT332A.............................................84 YMT332B.............................................84 YMT334B.............................................84 Z15J ...................................................108 Z21248...............................................317 Z28248...............................................317 Z51248...............................................317 www.switchcraft.com (R) Registered trademark of Switchcraft, Inc. Note: Contact your Switchcraft Representative for price and delivery