ABOUT SWITCHCRAFT, INC.
Switchcraft, Inc. was established in 1946 to manufacture
jacks, plugs and switches, from its original plant located
on West Diversey Street in Chicago.The company moved
to a larger facility at 1328 North Halsted Street in 1948, and
in 1958, the operation moved to 5555 Nor th Elston Avenue,
which is still the headquar ters of the corporation.
Switchcraft is a leading supplier of a broad line of components
for the audio/video, broadcast, telecommunication,
computer, medical, military, appliance, transportation and
instrumentation industr ies.
In the 185,000-square-foot Chicago facility, Switchcraft
manufactures electronic and elecromechanical compo-
nents, including:
•Jacks Plugs
Connectors Jackfields
•Patch Panels Patch Cords
Switches EAC Power
Molded Cable Assemblies Receptacles
With a basic line of over 5,000 standard products and
thousands of var iations, Switchcraft is proud to offer a
limited lifetime warranty on all products.
Switchcraft markets products both domestically and
inter nationally through a network of manufacturers’
representatives and independent distr ibutors.
In 1999, Switchcraft acquired the Conxall Corporation
located in Villa Park, Illinois. Conxall was founded in 1971
as a manufacturer of sealed connectors for the marine
industr y.Today, the company offers a broad line of custom
cable assemblies and connectors used in marine, industrial,
sensor, communications and transpor tation applications.
For more infor mation contact Conxall at (630) 834-7504, or
visit their website at www.conxall.com.
LIMITED LIFETIME WARRANTY
Switchcraft warrants all of its products to be of sound
design, good materials and workmanship at the time of
manufacture.
Switchcraft will repair or replace at its discretion any product
proven to be defective under nor mal use.
Switchcraft’s liabilty under the ter ms of this warranty is limited
to the repair or replacement of defective products which
have not been damaged through accident, abuse, misuse
or unauthorized repair. Switchcraft shall in no case be liable
for special or consequential damages of any nature.
Switchcraft®...
Consistently Excellent Since 1946sm
ABOUT
CATALOG SECTIONS
Connectors . . . . . . . . . . . 1-78
Jacks & Plugs . . . . . . . . . 79-162
Jack Panels . . . . . . . . . . . 163-238
Patch Cords and
Molded Cable
Assemblies . . . . . . . . . . . 239-268
Switches . . . . . . . . . . . . . 269-318
Index by Part Number . . . 319-328
Visit us on the net:
www.switchcraft.com
* Please visit the product pages on our website for the most up-to-date product information
www.switchcraft.com ® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
PHONE: 773 792-2700
TABLE OF CONTENTS
i
CONNECTORS AND RECEPTACLES
Q-G® XLR CONNECTORS .........................................................1-30
Q-G® Connector Part Number ing System....................................2
Professional Series Q-G® Connector Part Numbering System.......2
Q-G® Audio Connectors A, AA, AND QGP Series ....................3-4
Part Numbers - Male Cord Plugs/Female Cord Plugs..................4
Q-G® Color Flex Reliefs/Flex Relief .............................................5
AAA XLR Connectors ................................................................6-7
P(*)M Gooseneck Plug, P(*)F Microphone Plug,
R(*)MZ Cord Plug, R(*)FZ Cord Plug ...........................................8
D(*)M, D(*)F and D(*)FD Receptacles..........................................9
T(*)F and T(*)FM Cord Plug With On-Off Switch..........................9
B(*)F Receptacle, C(*)F Receptacle, B(*)M Receptacle,
C(*)M Receptacle........................................................................10
E Series Receptacles .............................................................11-15
EH Series Receptacles ...............................................................16
PQG® Receptacles................................................................17-18
PD Series - Plastic Panel Mount ...........................................19-21
Y3F, Y3FPC, Y3FDPC and Y3MPC Receptacles........................22
F Series Receptacles ............................................................23-24
Q-G® Adapters, Accessories .....................................................25
Q-G® Wall Plate Receptacles ....................................................26
Q-G® Connector-Adapters.....................................................27-28
S*FM Audio Connector-Adapter .................................................28
Audio “Y” Adapters .....................................................................28
DMX Adapter ..............................................................................29
Q-G® Connector-Adapter Receptacles ......................................30
Z Matching Transformers, Series M(*)M, Series L(*)MN ............30
TINI Q-G® MINIATURE CONNECTORS .................................31-37
Tini Q-G® Audio Adapters ..........................................................31
TB(*)M AND TB(*)MB Receptacle,TLP(*) Looping Plug, Straight
Female Looping Plug, Reverse Gender TQG Series .................33
TRA(*)M PC Mount Male Receptacle ........................................34
TRASM*M, TRAPC*M Series ...............................................34-36
TY(*)F and TY(*)FPC Receptacles,TYEF Escutcheons,
TQG(*)F and TQG(*)M Connector Inser ts, TBA(**)
Audio Adapter .............................................................................37
HPC HIGH POWER AUDIO CONNECTORS ...........................38-40
EN3TMini WEATHERTIGHT CONNECTOR SERIES ..............41-45
2 - 8 pin Cord Connector, 9 - 18 pin Cord Connector ................43
2 - 8 pin Panel Connector, 9 - 18 pin Panel Connector .............44
2 - 8 pin Inline Connector, 2 - 8 pin Overmolded Cord
and Inline Connector ..................................................................45
DIN CONNECTORS .................................................................46-55
Plugs .....................................................................................46-48
Panel Mount Receptacles .....................................................48-50
Right Angle PC Mount Receptacles .....................................51-52
Mini-DIN Right-Angle Receptacles, Right-Angle, PC Mount
Receptacles ..........................................................................47-53
SMD Series ................................................................................54
DMD Series ................................................................................55
USB CONNECTORS ................................................................56-57
IEEE 1394 FIREWIRE CONNECTORS ...................................58-59
SLIM-LINE CONNECTORS ......................................................60-64
Cord Plugs .................................................................................60
Slim-Line Connector Par t Number ing System, Cable Clamp and
Strain Relief ................................................................................61
SL40-SL41 Male/Female Cord Plugs .........................................62
SL10-SL17 Male/Female Receptacles .......................................63
SL18 Male/Female Receptacles ................................................64
CB CONNECTORS MICROPHONE CONNECTORS,
MINI-CON MINIATURE CONNECTORS .......................................65
HP75BNC SERIES BNC CONNECTORS ................................66-67
EAC RECEPTACLES ...............................................................68-77
RAPC322 POWER INLET SOCKET .............................................78
JACKS AND PLUGS
JACK SCHEMATICS ................................................................79-80
1/4" LONG FRAME TELEPHONE JACKS ...............................81-85
1/4" Jack Blocks .........................................................................86
BANTAM TYPE® JA CKS ..........................................................87-90
TT-JAX® (.173") Telephone Jacks Bantam Type® ................87-88
TT-JAX® (.173") Telephone Twin Jacks Bantam Type® .............89
TT-JAX® (.173") Telephone Triple Jacks Bantam Type® ............90
RTT Series Miniature Telephone Jacks,
Right Angle, PC Mount .........................................................91-92
.177" Enclosed Jacks .................................................................93
LITTEL JAX® 2- AND 3-CONDUCTOR,
1/4" PHONE JACKS ...............................................................94-109
Hi-D Jax® 2- and 3-Conductor .............................................96-99
Spring Lock PC Ter minals for Hi-D Jax® .................................100
SN Series, RA Series Right-Angle Phone Jacks ..............101-105
500 Series Jack Covers ...........................................................106
Series E (Locking) and Thick Panel Phone Jacks ...................107
1/4" Extension Jacks and 1/4" Speaker Jacks .........................108
1/4" Shielded Phone Jacks, SF-Jax®
Shor t Frame Jacks ...................................................................109
.141" MINIATURE PHONO JACKS .......................................109-111
3.5MM DUAL STEREO JACK ...............................................112-113
3.5MM SINGLE MONO AND STEREO JACKS ...................114-118
3.5MM SINGLE MONO JACKS ...................................................119
2.5MM SINGLE MONO AND STEREO JACKS ..........................120
.101" SUBMINIATURE PHONE JACKS ...............................121-122
RCA PHONO JACKS AND PHONO JACK SETS ................123-129
RIGHT ANGLE MINIATURE POWER JACKS ......................130-133
STRAIGHT MINIATURE POWER JACKS ............................134-135
VJ SERIES VIDEO JACKS ..........................................................136
MVJ SERIES VIDEO JACKS .......................................................137
MIL-TYPE 1/4" PHONE PLUGS ...........................................138-141
Littel Plug® Phone Plugs .........................................................139
MIL-TYPE 1/4" EXTENSION JACKS ...........................................142
* Please visit the product pages on our website for the most up-to-date product information
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
ii
FAX: 773 792-2129
TABLE OF CONTENTS
TELEPHONE PATCH ADAPTERS ..............................................142
BANTAM TYPE MINIATURE TELEPHONE PLUGS ............143-144
1/4" COMMERCIAL PHONE PLUGS -
LITTEL-PLUG® PLUGS .......................................................145-147
Silent-Plug And Lug® Phone Plugs .........................................148
Audio Loudspeaker and Heavy Duty 1/4"
Commercial Phone Plugs .................................................149-150
.206" Commercial Phone Plugs ...............................................151
1/4" Miti-Plug® Audio Plugs .....................................................152
1/4" Flat Plug Phone Plugs ......................................................153
Right-Angle Phone Plugs .........................................................154
1/4" Lock-Extension Jacks And Plugs ......................................155
3.5MM HEAVY DUTY STEREO PLUGS .....................................156
.141" MINIATURE PHONE PLUGS .............................................157
.097" SUBMINIATURE PHONE PLUGS ......................................158
AUDIO ADAPTERS .....................................................................159
RCA PHONO PLUGS ...........................................................160-161
MINIATURE POWER PLUGS ......................................................162
JACK PANELS, PATCH PANELS, PATCH KITS AND
JACKFIELDS
AUDIO PATCHBAYS .............................................................163-190
Professional Punchdown Ter minal (PPT)..................................163
Front Access MTPFA/TTPFA Series..................................164-165
MTP48K Wired Audio Series .............................................166-167
TTP96K Wired Audio Series..............................................168-169
MTPH/TTPH Harness Audio Series...................................170-173
MTPBP/TTPBP Backpanel Series.....................................174-175
EZ NORM Patchbay Series ...............................................176-177
TT96 EDAC Series .............................................................178-179
TTP96K Patchkit Series ....................................................180-181
MT48K/MT52K Patchkit Series..........................................182-183
MT48/MT52 Patchbay Series .............................................184-185
TTP96AS Patchbay Series ................................................186-187
Q-G®XLR Patchbay Series ................................................188-189
HPC Patchbay Series ................................................................190
RS 422 DATA PATCHBAY SERIES ......................................191-192
VIDEO PATCHBAYS .............................................................193-201
VPP Video Patchbay Series ..............................................193-195
MVP Midsize Video Patchbay Series ................................196-198
VAP Video/Audio Patchbay Series ....................................199-200
MBPK Video/Audio Patchbay Series ........................................201
TELECOM TYPE JACK PANELS .........................................202-238
Long Frame (1/4")Single Row Telephone Jack Panels ....202- 203
Long Frame (1/4") Twin Row Jack Panels ........................204-205
Long Frame (1/4") Modular Twin Row Jack Panels ..........206-209
Long Frame (1/4") Modular 3 Row Jack Panels .......................210
TT-Jax® (.173") Jack Panel Series 1600, A1600,
B1600, C1600 ...................................................................211-214
Modular TT-JAX® (.173") Panels -
Blank Series TT51, TT53, TT56, TT59 .....................................215
TT Module Inser ts - Series TT91, TT92 And TT93 ..................216
Modular TT-Jax® (.173") Jack Panels -Series TT5102000,
TT5202000, TT5502000, TT5602000 ...............................217-218
TT-Jax® (.173") Twin Row and Three Row Jack Panels....219-220
TT-Jax® (.173") Connectorized Jackfields - Series TT,
2-wire, 4-wire, 6-wire .........................................................221-229
TT® Lamps and Jewel Assemblies ..........................................230
Longframe Switchboard Switches ............................................231
Dummy Plugs and Hole Plugs .................................................232
TT® (Bantam) Circuit Guard Plugs ..........................................233
Miniature, Dummy Plugs, Hole Plugs .......................................234
Designation Strips .............................................................235-236
Kwik-Change® Designation Str ips (Double Height) .................237
X-Wide® Vertical Designation Str ips ........................................238
PATCH CORDS AND
MOLDED CABLE ASSEMBLIES
MOLDED CABLE ASSEMBLIES ..........................................239-261
Design Materials and Features ................................................239
3.5MM Molded Cables .............................................................240
Power-Plug Batter y Charger Plugs and Jacks .........................241
Power Plugs and Jacks Part Numbering System .....................242
EN3T MINI Weathertight Overmolded Cable Assemblies ........243
Cordette® and Cord Switch Assemblies ....................................44
Cordette® Switches .................................................................245
DIN Plugs ..........................................................................246-248
MIDI Cables ..............................................................................249
Miniature, Shielded, Molded Tini Q-G® Plugs .........................250
Molded Cable Assemblies for Multi-Pin Interconnection
Part Numbering System ...........................................................251
Standard Multi-Pin Interconnection Cables ..............................252
Micro Plug® Subminiature Phone Plugs ..................................253
Tini Plug® Miniature Phone Plugs ...........................................254
Phono Plugs and Phono Extension Jacks ...............................255
Tini-Extension® Jacks ..............................................................256
Littel Plug® Phone Plugs ..................................................256-257
Extension Jax® Phone Jacks ...................................................257
Cable Clamp Bands, “Y” Junctions ..........................................258
Part Numbering System ...........................................................259
Standard Cable Guide ..............................................................260
Cross Reference Guide ............................................................261
AUDIO/VIDEO PATCHCORDS ............................................262- 267
1/4" Longframe Telephone Patch Cords, MIL Type 1/4" Patch
Cords ........................................................................................262
Combination Patch Cords and MIL Type
1/4" Twin Patch Cords .............................................................263
Miniature TT® Braided Patch Cords .......................................264
Miniature TT® Molded Patch Cords
and Telephone Couplers ..........................................................265
Video Patch Cords ...................................................................266
Broadcast Series 3-Conductor Bantam TT Patch Cords,
Analog-AES/EBU Audio, and RS422 Patching ........................267
SWITCHES
PUSHBUTTON SWITCHES
IBS Series Miniature Keyboard Switches .................................269
IBS Keyboard Switch Pushbuttons ...........................................270
US Series Uniswitch® Switches ...............................................271
BXR Series Box Switch® Switches ..........................................272
Button-Switch® Switches, Tini-Switch® Switches ...................273
Littel-Switch® Switches ............................................................274
Hi-D Switch® PC Mount Switches, DA-Switch Switches .........275
Cord-Switch® Cord Switches, Cordette® Cord Switches ........276
* Please visit the product pages on our website for the most up-to-date product information
www.switchcraft.com ® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
PHONE: 773 792-2700
TABLE OF CONTENTS
iii
Push-Lite® Switches and Indicators .................................277-281
Series PL9000 - PL® Indicators, Pushbutton/Indicator
Screens, Color Filter Snap-Insserts, Optional
Mounting Barriers, Light Divider ...............................................278
Part Numbering System ...........................................................279
Outline Dimensions ...........................................................280-281
SLIDE SWITCHES ...............................................................282-290
General Purpose Slide Switches ......................................284-287
Miniature Slide Switches ...................................................288-290
Side-Slide®/Miniature Slide Switches ......................................290
European Line Voltage Selector Switches ........................291-293
LEVER SWITCHES ..............................................................294-298
GENERAL PURPOSE STACK SWITCHES .........................299-300
MULTIPLE STATION SWITCHES .........................................301-302
Littel® Multi Switch ............................................................303-308
DW Multi-Switch ................................................................309-311
Tini® DW Multi-Switch ......................................................312-313
IBS Multi-Switch - Series IBS ...........................................314-315
Multi-Switch Pushbuttons ..................................................316-317
INDEX BY PART NUMBER ...................................................319-328
* Please visit the product pages on our website for the most up-to-date product information
Field-proven Switchcraft Q-G ®(Quick-Ground) 3- through
7-contact audio connectors with ground terminal and ground
contactors are available in a wide range of plugs and
receptacles f or microphones, test equipment, instrumentation,
computers, video cameras, mixing consoles, tape recorders,
PA and sound reinforcement, stereo systems and man y more
applications.
Switchcraft Q-G®connectors f eature a separ ate ground-terminal
electrically integral with connector shell. Ground continuity
between mating plugs is automatically accomplished through
exclusive “Dual Point” grounding system. Socket and pin
assemblies utilize “wedge-action” to insure firm, reliable
positioning in connector shell. Inser ts are easily removable for
wiring and soldering. High-impact thermoplastic insures long
reliable insert assembly lif e.Female connectors ha v e latch lock
feature to hold connectors firmly together .Plugs and receptacles
are mechanically keyed for proper mating. Q-G (*) Series 3-,
4-, 5-, 6-, and 7-pin/contact connectors offer 4-,
5-, 6-, 7-, and 8-pin contact versatility when ground-ter minal is
used. Switchcraft QGP connectors; are compatible with
3- and 4-contact (Neutrik, Amphenol 91-850 and Excellite
91-450 Series, and Cannon XLR-3, XLR-4):5-contact (Neutrik,
Cannon XLR-5 and Amphenol Excellite 91-450 Series).
Q-G®CONNECTORS
Inser t screw engages as any conventional screw, except it is
lefthand threaded. To disassemble the connector, tur n screw
counterclockwise down into inser t (see illustration).
DESIGN FEATURES
CONSTRUCTION: Sturdy, die-cast zinc with satin nickel
finish or Black-Velvet®finish to withstand hard use – even
abuse.Vel-Tone non-reflective finish on QGP connectors only.
INSERT INSULATION: High-impact, molded thermoplastic
provides high dielectric strength, and superior insulation
resistance.
LOCKING: Latchlock on female plugs and receptacles locks
into groove in mating male connector to prevent accidental
disconnect. Manual release of latchlock is required to
separate connectors. Q-G connectors are also available with
FAS-DISCONNECT detent in place of latchlock.QGP has die-
cast latchlock.
FAS-DISCONNECT: FAS-DISCONNECT detent permits
immediate disconnect of locked connectors with a 4-pound
(1.8 kg) force. FAS-DISCONNECT connectors are not
recommended for use in situations where strong or violent
pulls on cable may occur and cause accidental disconnect.
Available on Q-G connectors only.
DUAL PRESSURE PLATES: A*F and A*M Series provides
secure cable lock and strain relief for all standard size cables.
FLEX RELIEF: TPR cable flex relief bushings on cord plugs
are keyed to shell. Standard bushing opening accepts cables
from .21" to .3" diameter Bushings with other openings
accommodate cables from .105" to .205" diameter and from
.3" to .328" diameter.
CONTACTS: Q-G female connectors are copper alloy,
silver-plated, tarnish-resistant;male contacts are copper alloy,
silver-plated, tarnish-resistant. Gold-plated female contacts
are copper alloy. Male contacts are gold-plated.
WIRING: Large, unique design solder cups make wiring fast
and easy. Certain receptacles are also available with PC
terminals for use with printed circuit boards.
Grounding and Shielding
Tightening the insert screw establishes continuity between
ground terminal, ground contactors and connector housing.
Upon engagement with a mating plug or receptacle, the
ground circuit is automatically connected to the mating shell
through the ground contactor. Any pin or contact can be
grounded by “jumping” it to the ground terminal. Contact
1 engages before all other contacts and disengages after all
other contacts.
Captive Design®Insert Screws
Insert assembly is now readily removed from shell. Note
“Ground Terminal” area – large soldering cups make cable
installation fast and easy. Unitized 1-piece insert eliminates
possible loss of latchlock and spring.
To reassemble, replace insert assembly into shell, align inser t
screw under hole in shell and secure insert by turning insert
screw clockwise.This “wedges” inser t against inter ior of shell
providing a rigid connector assembly and positive electrical
continuity between ground ter minal and shell (see illustration).
SECTIONALIZED VIEW - A3F Plug to B3M Receptacle
MALE RECEPTACLE
FEMALE CONNECTOR
Panel
Pin
Ground T erminal
Ground T erminal
Cable Clamp
Insert
Shell
Strain Relief
Insert set screw
(Shell ground)
Latch Lock
Q-G CONNECTORS
Q-G CONNECTORS
®
®
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
1
CONNECTORS & RECEPTACLES
FAX: 773 792-2129
CONNECTORS & RECEPTACLES
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
* Please visit the product pages on our website for the most up-to-date product information
QG®PART NUMBERING SYSTEM
QG®PART NUMBERING SYSTEM
Q-G®CONNECTOR PART NUMBERING
PROFESSIONAL SERIES Q-G®CONNECTOR PART NUMBERING SYSTEM
Number of
Series Contacts Gender Options
ACORD PLUG WITH SCREW CABLE CLAMP 3-7 M MALE D FAS-DISCONNECT (FEMALE CONNECTORS)
AA CORD PLUG WITH CRIMP CABLE CLAMP F FEMALE B BLACK EPOXY FINISH
AAA CORD PLUG WITH TWIST ON HANDLE
BFRONT PANEL MOUNT USING NUT FM BOTH ST STRAIGHT PC TAILS
(S SERIES)
CFRONT PANEL MOUNT - CIRCULAR RA RIGHT ANGLE PC TAILS
DFRONT PANEL MOUNT - RECTANGULAR MMOMENTARY SWITCH ACTION
(T SERIES ONLY)
EMODULAR FRONT PANEL MOUNT PC PC TERMINALS (Y SERIES ONLY)
GWALL PLATE - 1 B SERIES MALE NKNURLED COUPLING NUT (L SERIES ONLY)
HWALL PLATE - 2 B SERIES MALES LFLEX RELIEF FOR .250" TO .328" CABLE O.D.
JWALL PLATE - 1 D SERIES FEMALE SSEE NOTE 1.
KWALL PLATE - 2 D SERIES FEMALE AU GOLD CONTACTS
LMICROPHONE ADAPTER - INTERNAL THREAD HHOUSING ONLY
MMICROPHONE ADAPTER - EXTERNAL THREAD OPTIONS SHOWN IN ORDER OF APPEARANCE
NCAP PLUG ZSCREWLESS STRAIN RELIEF
PGOOSENECK MOUNT
QG CONNECTOR INSERT
RRIGHT-ANGLE CORD PLUG
SMALE/FEMALE BARREL ADAPTER
TCORD PLUG WITH ON-OFF SWITCH
WRIGHT-ANGLE PANEL MOUNT
YREAR PANEL MOUNT
NOTE 1: S HAS DIFFERENT DESIGNATIONS DEPENDING ON THE SERIES.
FOR A, AA, AND T SERIES: SMALL FLEX RELIEF FOR .105" TO .205" CABLE OUTSIDE DIAMETER
FOR B, C, AND D SERIES: SANDED FRONT FACE FINISH
FOR G, H, J, AND K SERIES: STAINLESS STEEL WALL PLATE (STANDARD)
FOR N SERIES: SHORTING WIRING INSTALLED
NOTE 2: J, K AND T SERIES AVAILABLE IN FEMALE GENDER ONLY.
G, H, L, M, N, AND W SERIES AVAILABLE IN MALE GENDER ONLY.
Number Of
Series Contacts Model
PROFESSIONAL SERIES 322 FEMALE CORD PLUGS
PROFESSIONAL SERIES CORD PLUG 23 MALE CORD PLUGS
WITH CRIMP CABLE CLAMP 62 RECTANGULAR FEMALE PANEL MOUNT
63 RECTANGULAR MALE PANEL MOUNT
QGP
AQGP
CONNECTORS & RECEPTACLES
2
www.switchcraft.com ® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
PHONE: 773 792-2700
CONNECTORS & RECEPTACLES
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
* Please visit the product pages on our website for the most up-to-date product information
Q-G®AUDIO CONNECTORS A, AA, AND QGP SERIES
Q-G ®CORD PLUG CONNECTORS (continued)
QGP connectors (3 contacts only) feature Vel-Tone®
non-reflective finish, gray TPR flex relief and plated
pins/contacts for the most demanding applications.
Preferred by audio professionals the world over, Switchcraft®
QG®connectors feature unsur passed durability and a choice
of finishes and contact platings. Features include:
• High perfor mance inser ts in traditional Switchcraft®green
or black.
• Solder terminals rotated for easier access and soldering.
• All metal housing.
AA Series Only
• Rugged 1-piece cable clamp to relieve pulling and twisting
stresses on terminations.
• No Screws flex relief retention system.
• Integral bump shell grounding system.
SPECIFICATIONS
ELECTRICAL
Contact Resistance: 50 milliohm maximum, per pole.
Current Rating: 3 pole – 15A, 4 pole - 10A, 5 and 6
pole – 7.5A, 7 pole – 5A @ 125VAC.
Insulation Resistance: 1,000 M, minimum.
Dielectric Withstanding Voltage: 1,000 V (rms).
Capacitance: 2 pF between pins and 4 pF between pins
and shell, maximum (AA3M and AA3F).
MECHANICAL
Insertion/Withdrawal Forces: 7 pound maximum,
5 pound nominal, inser tion; 7 pound maximum,
5 pound nominal, withdrawal.
Wire Size: #12 wire gauge solid; #14 wire gauge stranded
(3 contact). #14 wire gauge solid; #16 wire gauge stranded
(4 contact). #16 wire gauge solid; #18 wire gauge stranded
(5 and 6 contact). #18 wire gauge solid; #20 stranded
(7 contact). (Q-G and QGP).
MATERIAL
Q-G CONNECTORS (A AND AA SERIES)
Shell: Die-cast zinc. Satin nickel finish, black velvet.
Insert Insulation: Molded thermoplastic.
Socket Contacts: Silver-plated copper alloy tar nish-resistant;
bifurcated on 3-contact type. Gold is available
Pin Contacts: Silver-plated copper alloy. Resists tar nishing,
and provide excellent electrical conductivity. Gold is available.
Latchlock: High-strength die-cast zinc.
Latch Release: Steel, nickel-plated.
Latch Detent: Formed stainless steel.
Insert Screw: Stainless steel.
Flex Relief: TPR (ther moplastic rubber).
QGP CONNECTORS
Shell: Die-cast zinc, non-reflective gray Vel-Tone®finish.
Socket Contacts: Gold-plated copper alloy
Pin Contact: Gold-plated copper alloy
Easy change
flex relief for
color coding
“No screws”
retention
system
Solder terminals
rotated for easy
access & soldering
Light green, high
performance insert “Dual-point
shell grounding” “No screws”
retention
system
Easy change
flex relief for
color coding
Sleek, stream-
lined shell Cable
clamp Solid pins,
silver plated
for reliability
Bifurcated high
performance
socket contacts
Durable
metal latch
lock
Rugged cable
clamp to ground
(no screws)
Rugged
metal shell Standard nickel
or black finish
Q-G®CORD PLUG CONNECTOR – A, AA AND QGP SERIES
Q-G®CORD PLUG CONNECTOR – A, AA AND QGP SERIES
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
3
CONNECTORS & RECEPTACLES
FAX: 773 792-2129
CONNECTORS & RECEPTACLES
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
* Please visit the product pages on our website for the most up-to-date product information
QG®CORD PLUGS – A AND QGP SERIES
QG®CORD PLUGS – A AND QGP SERIES
Standard Q-G®Cord Plugs, Series A(*)F and QGP
Satin Fas- Large
Nickel Black Finish Dis- Flex Insert
Finish Silver 1Gold 1Connect Relief 2QGP Series
nContacts
A3F A3FB A3FBAU A3FD A3FL QGP322 3
A3FS3——— 3
A4F A4FB A4FBAU A4FD A4FL 4
A5F A5FB A5FBAU A5FD A5FL 5
A6F A6FB A6FBAU 6
A7F A7FB A7FBAU 7
Straight female cord plug with
FAS-DIS-CONNECT detent. Straight male cord plug.
A(*)F CORD PLUG A(*)FD CORD PLUG A(*)M CORD PLUG
PART NUMBERS - FEMALE CORD PLUGS
Standard Q-G®Cord Plugs, Series A(*)M and QGP
Satin Large
Nickel Black Finish Flex Insert
Finish Silver 1Gold 1Relief 2QGP Series Contacts
A3M A3MB A3MBAU A3ML QGP323 3
A3MS 3—— 3
A4M A4MB A4MBAU A4ML 4
A5M A5MB A5MBAU A5ML 5
A6M A6MBAU 6
A7M A7MBAU 7
PART NUMBERS - MALE CORD PLUGS
All above part numbers have black flex relief installed. Contact Switchcraft for
color flex relief.
Available on special order only; contact Switchcraft for price and deliver y.
*Number of inser t contacts or pins must be specified to complete par t number.
1. Contact plating.
2. Accepts cables from .25" (6.35 mm) to .328" (8.33 mm) diameter
3. Accepts cables from .105" (2.7 mm) to .205" (5.2 mm)
Available on special order only; contact Switchcraft for price and deliver y.
AA(*)F CORD PLUG AA(*)FD CORD PLUG AA(*)M CORD PLUG
Q-G®CORD PLUG CONNECTORS (continued)
Straight female cord plug with
standard latchlock. Available in
3-7 pin versions.
Advanced Q-G®Cord Plugs, Series AA(*)F and AQGP
AA3F AA3FB AA3FBAU AA3FD AA3FL AQGP322 3
—— AA3FLD 3
AA4F AA4FB AA4FD AA4FL 4
AA5F AA5FB AA5FD AA5FL 5
AA6F AA6FB AA6FD AA6FL 6
AA7F AA7FB AA7FD AA7FL 7
PART NUMBERS - FEMALE CORD PLUGS Advanced Q-G®Cord Plugs, Series AA(*)M and AQGP
AA3M AA3MB AA3MBAU AA3ML AQGP323 3
AA4M AA4ML 4
AA5M AA5MB AA5ML 5
AA6M AA6ML 6
AA7M AA7ML 7
PART NUMBERS - MALE CORD PLUGS
All above par t numbers have black flex relief installed. Contact Switchcraft for
color flex relief.
Available on special order only; contact Switchcraft for price and delivery.
CONNECTORS & RECEPTACLES
4
www.switchcraft.com ® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
PHONE: 773 792-2700
CONNECTORS & RECEPTACLES
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
* Please visit the product pages on our website for the most up-to-date product information
Q-G®COLOR FLEX RELIEFS
Rainbow color cable strain relief bushings can be specified
to match or complement equipment decors or code individual
or grouped connections for quick recognition. On special
order, tan, pink and dark blue are available. Bushings
accommodate cables from .21" to .30" diameter.
Prepackaged, 25 per bag.
Part Numbers Flex Flex
3 Pins/Contacts Relief Relief
Female Male Color Only
A3F A3M Black SR00
A3F01 A3M01 Brown SR01
A3F02 A3M02 Red SR02
A3F03 A3M03 Orange SR03
A3F04 A3M04 Yellow SR04
A3F05 A3M05 Green SR05
A3F06 A3M06 Blue SR06
A3F07 A3M07 Violet SR07
A3F08 A3M08 Gray SR08
A3F09 A3M09 White SR09
Special order only; contact Switchcraft for price and delivery.
Flex relief bushing with small opening accommodates
cables from .105" (2.7 mm) to .205" (5.2 mm). Standard
size bushing accepts cables from .210" (5.3 mm) to .300"
(7.6 mm) outside diameter. Bushing with large opening
accommodates cables from .300" (7.6 mm) to .328" (8.3
mm).Larger cables are often needed f or multiple-conductor
instrumentation. Code letter “L in last or second to last digit
in part number indicates plug with large bushing. Code
letter “S” in last or second to last digit in part number
indicates plug with smaller bushing.
SWITCHCRAFT PART NUMBER K255
Package of 100 cable clamp screws.
Special order only; contact Switchcraft for price and delivery.
Q-G®FLEX RELIEF
Q-G®CONNECTORS (continued)
Small Cables
.105 to .205
(2.7) (5.2)
Standard Cables
.210 to .300
(5.3) (7.6)
Large Cables
.300 to .328
(7.6) (8.3)
Q-G®FLEX RELIEF
Q-G®FLEX RELIEF
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
5
CONNECTORS & RECEPTACLES
FAX: 773 792-2129
CONNECTORS & RECEPTACLES
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
* Please visit the product pages on our website for the most up-to-date product information
AAA SERIES Q-G®TWIST CONNECTOR
Switchcraft introduces the AAA Series or Q-G®Twist XLR
connectors.The Q-G®Twist Series is av ailable in male or female cord
plug, 3 through 7 pins or contacts.The unique features are the easy
twist on combination handle/strain relief , and the reduced number of
par ts to assemble. With the inser t built into the front shell, and the
strain relief preloaded into the handle, the end user has only two
parts to assemble – slide the handle onto the cable, solder the
terminations, and twist on the handle.As the handle is tightened, the
strain relief tightens around the outer jacket of the cable. A ramp on
the strain relief keeps it from rotating around the cable jacket and
twisting the cable. The strain relief was designed to accommodate
the most popular cable sizes.A rugged die-cast metal handle insures
optimum protection, and increases signal shielding.Popular options
include black and gold finishes, as well as a lower cost plastic
handle version.
FEATURES AND BENEFITS
• Only two pieces to assemble
• Easy twist on handle reduces assembly time
• Rugged die-cast metal handle
• Accepts cable OD’s (.100" – .285")
• Black finish available
• Gold-plated pins/contacts available
• Lower cost plastic handle version available
APPLICATIONS
• Audio
• Medical
• Instrumentation
• Process Controls
SPECIFICATIONS
ELECTRICAL
Contact Resistance: 50 milliohm maximum, per pole.
Current Rating @ 125VAC:
3 pole – 15A
4 pole –10A
5 & 6 pole – 7.5A
7 pole – 5A
Insulation Resistance: 1,000 M, minimum.
Dielectric Withstanding Voltage: 1,000 V (rms)
Capacitance: 3 pF between pins and 6 pF
between pins and shell, maximum
MECHANICAL
Insertion/Withdrawal Forces: 10 lbs. maximum,
8 lbs. nominal / 7 lbs. maximum, 5 pounds nominal.
Wire Size:
3 Contact
#12 wire gauge solid #14 wire gauge stranded
4 Contact
#14 wire gauge solid #16 wire gauge stranded
5 & 6 Contact
#16 wire gauge solid #18 wire gauge stranded
7 Contact
#18 wire gauge solid #20 wire gauge stranded
MATERIAL
Shell: Die-Cast zinc with nickel finish or black chrome.
Handle: Die cast with nickel finish or black chrome.
Also black ther moplastic handle available.
O Ring: TPR (Ther moplastic r ubber).
Insert Insulation: Molded ther moplastic.
Socket Contacts: Silver plated copper alloy tarnish resistant;
bifurcated on 3 and 4 contact types. Gold is available.
Pin Contacts: Silver plated copper alloy. Resists tar nishing,
and provides excellent electrical conductivity. Gold is available.
Latch lock: High strength die cast zinc.
Strain Relief: TPR
Flex Relief: TPR (Thermoplastic r ubber)
AAA CONNECTORS
AAA CONNECTORS
AAA CONNECTORS
Series Pins/Contacts Gender Handle Material Housing Terminal Z
Finish Finish
AAA 3-7 pins F: Female P: Plastic B: Black AU: Gold New Strain Relief
3-7 pins M: Male Blank: Metal Blank: Nickel Blank: Silver
CONNECTOR PART NUMBER SCHEME
CONNECTORS & RECEPTACLES
6
www.switchcraft.com ® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
PHONE: 773 792-2700
CONNECTORS & RECEPTACLES
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
* Please visit the product pages on our website for the most up-to-date product information
AAA CONNECTORS (continued)
AAA CONNECTORS
AAA CONNECTORS
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
7
CONNECTORS & RECEPTACLES
FAX: 773 792-2129
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
CONNECTORS & RECEPTACLES
* Please visit the product pages on our website for the most up-to-date product information
Q-G®CONNECTORS (continued)
R(*)FZ CORD PLUG R(*)MZ CORD PLUG
P(*)F MICROPHONE PLUG P(*)M GOOSENECK PLUG
Part Number Insert Contacts
R3FZ 3
R4FZ 4
R5FZ 5
R6FZ 6
R7FZ 7
Part Number Insert Pins
R3MZ 3
R4MZ 4
R5MZ 5
R6MZ 6
R7MZ 7
Part Number 1Inser t Contacts
P3F 3
P4F 4
P5F 5
Part Number 1Insert Pins
P3M 3
P4M 4
P5M 5
1. Satin Nickel Finish. (standard)
2. Large flex relief accepts cable from .25" to .328" diam
eter. (optional)
3. Gold-plated contacts. (optional)
Available on special order only; contact Switchcraft for price and deliver y.
Right angle, female cord mount plug, latching. New style
incorporates an insert that can rotate every 45° for added
flexibility in tight applications. Also utilizes the new strain relief
system with twist-on handle.
Accepts cable O.D.'s .100"–.285"
For black finish, add "B" suffix.
For black/gold finish, add "BAU" suffix.
Right angle, male cord mount plug, latching. New style
incorporates an insert that can be rotated every 45° for added
flexibility in tight applications. Also utilizes the new strain relief
system with twist-on handle.
Female microphone plug for gooseneck mount. Fits standard
gooseneck with external 5/8-27 thread. Microphone plugs
directly into connector. (Gooseneck not supplied.)
Male plug f or goosenec k mount.Fits standard gooseneck with
internal 5/8-27 thread. Use on gooseneck with microphone
plug on opposite end. Plugs directly into female receptacle.
(Gooseneck not supplied.)
Q-G CORD PLUG CONNECTORS
Q-G CORD PLUG CONNECTORS
®
®
Accepts cable O.D.'s .100"–.285"
For black finish, add "B" suffix.
For black/gold finish, add "BAU" suffix.
CONNECTORS & RECEPTACLES
8
www.switchcraft.com ® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
PHONE: 773 792-2700
CONNECTORS & RECEPTACLES
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
* Please visit the product pages on our website for the most up-to-date product information
* Number of inser t contact or pins must be specified to complete par t number.
Available on special order only; contact Switchcraft for price and deliver y.
1 Non-reflective gray finish, gold-plated pins.
Q-G®CORD PLUG CONNECTORS AND RECEPTACLES
Part Number Part Number Inser t Contacts
T3F T3FL 3
T3FM T3FLM 3
T4F T4FL 4
T4FM T4FLM 4
T(*)F Straight female cord plug with DPDT (2-C) locking
on-off switch; standard latchlock.
T(*)FM Straight female cord plug with SPDT (1-C)
momentar y on-off switch; standard latchlock.
Slide switches rated 500 mA, 125V (AC or DC).Mounting
screws are supplied.
T(*)F AND T(*)FM CORD PLUG WITH ON-OFF SWITCH
D(*)M, D(*)F AND D(*)FD RECEPTACLES
Nickel Black Finish
Finish Silver Gold Detent QGP Series1Pins
D3M D3MB D3MBAU QGP363 3
D4M D4MB D4MBAU 4
D5M D5MB D5MBAU 5
D6M D6MB D6MBAU 6
D7M D7MB D7MBAU 7
D3F D3FB D3FBAU D3FD QGP362 3
D4F D4FB D4FBAU D3FDB 4
D5F D5FB D5FBAU 5
D6F D6FB D6FBAU D6FDB 6
D7F D7FB D7FBAU 7
Q-G CORD PLUG CONNECTORS AND RECEPTACLES
Q-G CORD PLUG CONNECTORS AND RECEPTACLES
®
®
Studio quality black and gold Q-G®receptacle with black
housing and gold contacts is designed for low/stable contact
resistance and withstands corrosion where highest quality is
required for recording and broadcast studio equipment,
consoles, and other applications.
D(*)M SERIES – Male receptacle for panel or chassis
mounting. Special rectangular flange permits close spacing on
crowded panels, has two .136" (3.45mm) diameter
countersunk holes for #5-40 flat head mounting screws (not
supplied). Mounts from front of panel or chassis in .766"
(19.45) diameter hole. Satin nickel finish (Series D*M) or black
finish (Series D*MB, or D*MBAU).
D(*)F SERIES – Female receptacle for panel or chassis
mounting. Flange has two .136" (3.45 mm) diameter
countersunk holes for #5-40 flat head mounting screws (not
supplied).Mounts from front of panel or chassis in .953" (24.21
mm) diameter hole.Series D(*)F has standard latchlock;Series
D(*)FD has FAS-DISCONNECT detent. Satin nickel finish
(Series D*F and D*FD) and “Black-Velvet” finish (Series
D*FBAU).
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
9
CONNECTORS & RECEPTACLES
FAX: 773 792-2129
CONNECTORS & RECEPTACLES
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
* Please visit the product pages on our website for the most up-to-date product information
Q-G RECEPTACLES
Q-G RECEPTACLES
Q-G®RECEPTACLES (continued)
C(*)M RECEPTACLE
Male receptacle for panel or chassis mounting. Flange has three
.140" (3.57 mm) diameter holes for #5-40 mounting screws (not
supplied). Mounts from front of panel or chassis in .766" (19.45
mm) diameter hole.
Part No. 1Part No.5Inser t Pins
C3M QGP327 3
C4M 4
C5M 5
C6M 6
C7M 7
1. Satin nickel finish. (standard) 2. “Black-Velvet” finish. (optional) 3. Gold-plated contacts. (optional) 4. Fas-disconnect detent.(optional)
5. Non-reflective gray finish, gold-plated pins. (standard)
Panel-mount female receptacle. Mounts with spanner nut
from front of panels up to .4375" (11.11 mm) thick. Slot in
threaded part of housing permits non-turn mounting.
Requires 1.25" (31.75 mm) diameter minimum mounting
hole. Spanner nut is die-cast zinc with satin nickel finish
(Series B*F) or black finish (Series B*FB).
Part No.1Part No. 2Inser t Contacts
B3F B3FB 3
B4F 4
B5F 5
B6F 6
B7F 7
B(*)M RECEPTACLE
Part No.1Part No.2Inser t Pins
B3M B3MB 3
B4M 4
B5M 5
B6M 6
B7M 7
C(*)F RECEPTACLE
Female receptacle for panel or chassis mounting.Flange has
three .140" (3.57 mm) diameter holes for #5-40 mounting
screws (not supplied). Mounts from front of panel or chassis
in 0.953" (24.21 mm) diameter hole.
Part No.1Part No. 5Inser t Contacts
C3F QGP326 3
C4F —4
C5F —5
C6F —6
C7F —7
B(*)F RECEPTACLE
Special order only. Contact Switchcraft.
Panel-mount male receptacle. Mounts with locknut from front of
panels up to .250" (6.35 mm) thick. Requires .812" (20.64 mm)
diameter mounting hole. For non-turning mounting, can be keyed
to “D” shaped panel hole, or S3519 mounting adapter can be used.
Satin nickel finish (Series B*M) or black finish (Series B*MB).
®
®
CONNECTORS & RECEPTACLES
10
www.switchcraft.com ® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
PHONE: 773 792-2700
CONNECTORS & RECEPTACLES
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
* Please visit the product pages on our website for the most up-to-date product information
E Series Q-G®Receptacles are available with quick release
inserts. Quick insert release is accomplished by turning
screw lock from front of insert. Insert can then be removed
from the rear. For PC board applications, insert can be
removed/assembled to the housing while soldered to
the PC board.
E Series receptacles can be specified as complete assemblies,
or as separate inserts and housings. Stocking separate
inserts and housings offer considerable cost and time sav-
ings by minimizing inventory and maximizing configuration
possibilities.
FEATURES
• Replaces Neutrik D Ser ies
• 3-pin contact; male and female types
• Both male and female fit in same panel cutout
• Choice of 4 terminations; solder cups, conical springs,
straight or right angle PC ter minals.
• Inser ts and housings can be specified separately
• Quick release inserts for ease of removal
• Locking receptacles
• Protected ground clip minimizes scooping damage
• Inser t lock detent resists disassembly from shock or
vibration during nor mal handling and transpor tation
• Silver and gold-plated contacts available
• Rugged metal shells; black or satin nickel finishes
Through-the-shell ground connection and all-metal
shells for greater shielding effectiveness
• Compatible with Switchcraft Q-G ®, QGP and other
connectors with similar configurations
QUICK RELEASE INSERT
In two simple steps, inserts can be released while
housing stays fastened to the panel.
1. With a small screwdriver, twist inser t locking screw
from front of inser t.
2. Remove inser t from the rear of the housing.
TERMINALS
Four ter minations are available on E Series receptacles:
1. Conical Spring Solder terminals – conical spring on
each pin holds wire in place providing constant pressure
during solder ing process.This effectively acts as a third
hand, assuring a high quality solder ter mination.
Housing mounts to panel.
2. Straight PC terminals – direct ter mination to PC
board. Housing mounts to panel.
3. Right-angle PC terminals - direct ter mination to PC
board at a right-angle. Housing mounts to panel.
4. SC - Solder cup
SPECIFICATIONS
ELECTRICAL
Contact Resistance: 50 milliohms maximum, per pole.
Current Rating: 15A
Insulation Resistance: 2 X 106M
Dielectric Resistance: 1,000 V rms
Capacitance: 10 pF
MECHANICAL
Insertion/Withdrawal Forces: 7 pounds maximum/
5 pounds nominal inser tion; 7 pounds maximum/
5 pounds nominal withdrawal.
Life: 10,000 operations (minimum).
ENVIRONMENTAL
Thermal Range: -55° C to +85° C
Humidity: Meets MIL-STD-202F, method 106E.
Thermal Shock: Meets MIL-STD-202F, method 107D.
Salt Spray: Meets MIL-STD-202F, method 101D.
MATERIAL
Shells: Die-cast; satin-nickel or Black Velvet.
Inserts: Glass-filled ther moplastic.
Socket Contacts: Copper alloy, silver- or gold-plated.
Pin Contacts: Copper alloy, silver- or gold-plated.
Latch Release: Steel, nickel-plated.
Insert Locking Cam: Die-cast zinc.
Conical Spring
Solder T erminals Straight PC
Terminals Solder cup
E Series
Receptacles
E SERIES RECEPTACLES
Right Angle
PC T erminals
E SERIES Q-G®RECEPTACLES
E SERIES Q-G®RECEPTACLES
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
11
CONNECTORS & RECEPTACLES
FAX: 773 792-2129
CONNECTORS & RECEPTACLES
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
* Please visit the product pages on our website for the most up-to-date product information
E SERIES PART NUMBERING SYSTEM
E SERIES PART NUMBERING SYSTEM
E SERIES PART NUMBERING SYSTEM
HOUSING ONLY PART NUMBER SCHEME
INSERT ONLY PART NUMBER SCHEME
Series Pins/ Gender Fas-disconnect Termination Housing Terminal
Contacts Option Style Finish Finish
E3-5 pins F: Female D: Fas-disconnect ST: Straight PC ter minals AU: Gold
M: Male Blank: Standard locking RA: Right angle PC ter minals Blank: Silver
SC: Solder cups
Blank: Conical springs*
Series Pins/ Housing Mounting Hole
Contacts Finish Options
EF: Female B: Black M3: M3 x 0.5 thread
M: Male Blank: Nickel 440: #4-40 thread
Blank: Counter-sunk hole
Series Pins/ Gender Fas-disconnect Termination Housing Terminal Mounting Hole
Contacts Option Style Finish Finish Options
E3-5 pins F:Female D: Fas-disconnect ST: Straight PC terminals B: Black AU: Gold M3:M3 x 0.5 thread
M: Male Blank: Standard RA:Right anglePCterminals Blank: Nickel Blank: Silver 440: #4-40 thread
locking SC: Solder cups Blank: Counter-
Blank: Conical springs* sunk hole
CONNECTOR PART NUMBER SCHEME
*3-pin only
CONNECTORS & RECEPTACLES
12
www.switchcraft.com ® Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
PHONE: 773 792-2700
CONNECTORS & RECEPTACLES
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
* Please visit the product pages on our website for the most up-to-date product information