PM232-670.00M - Connor-Winfield Corporation (The)

Bulletin Ec262

Page 1of2

Revision P01

Date 11 Aug 2009

2111 Comprehensive Drive

Aurora, Illinois 60505

Phone: 630- 851- 4722

Fax: 630- 851- 5040

www.conwin.com

US Headquarters:

630-851-4722

European Headquarters:

+353-61-472221

Description Features:

5.0x7.0mm

Surface Mount LVPECL

Clock Oscillator Series

The Connor-Winfield PMxxx

- Series are 5x7.0mm

Surface Mount, LVPECL,

Fixed Frequency Crystal

Controlled Oscillator (XO).

Through the use of

multiplication, the PMxxx - Series are

designed for applications requiring tight

frequency stability, wide temperature

range and low jitter. Operating at 2.5V

or 3.3V supply voltage, the PMxxx -

Series provides LVPECL Differential

Outputs with enable / disable function.

The surface mount package is designed

for high-density mounting and is

optimum for mass production.

Model PMxxx - Series

5.0 x7.0mm Surface Mount Package

2.5V or 3.3V Operation

LVPECL Output Logic

Frequency Stabilities Available:

14x / : +/-20ppm

x / : ppm

x / 2x 0pp

Temperature Ranges Available:

PM1xx Series: 0 to 70°C

PM2xx Series: -40 to 85°C

Low Jitter <1pS RMS

Tri-State Enable/Disable

Tape and Reel Packaging

RoHS Compliant / Lead Free

PM PM34x / PM44x

PM11 PM31x / PM41x +/-25

PM12 PM2 / PM32x / PM42x: +/-5 m

PM13x / PM23x / PM33x / PM43x: +/-100ppm

PM3xx Series: 0 to 85°C

PM4xx Series: -20 to 70°C

Absolute Maximum Ratings Table 1.0

Parameter Units Minimum Nominal Maximum Units Note

Storage Temperature -55 - 125 °C

Supply Voltage (Vcc) -0.5 - 4.6 Vdc

Input Voltage -0.5 - Vcc+0.5 Vdc

Operating Specifications Table 2.0

Parameter Minimum Nominal Maximum Units Note

Center Frequency (Fo) 98 - 670 MHz

Total Frequency Tolerance (See Table 9 for full part number)

Model PMx4x (See Table 9) -20 - 20 ppm 1

Model PMx1x (See Table 9) -25 - 25 ppm 1

Model PMx2x (See Table 9) -50 - 50 ppm 1

Model PMx3x (See Table 9) -100 - 100 ppm 1

Operating Temperature Range

Model PM1xx (See Table 9) 0 - 70 °C

Model PM4xx (See Table 9) -20 - 70 °C

Model PM3xx (See Table 9) 0 - 85 °C

Model PM2xx (See Table 9) -40 - 85 °C

Supply Voltage (Vcc)

Model PMxx2 (See Table 9) 2.375 2.500 2.625 Vdc

Model PMxx3 (See Table 9) 3.135 3.3 3.465 Vdc

Supply Current (Icc) - 60 90 mA

Period Jitter - 3 5 ps RMS

Phase Jitter- BW=12kHz to 20MHz - 0.6 1.0 ps RMS

SSB Phase Noise at 10Hz offset - -40 - dBc/Hz

SSB Phase Noise at 100Hz offset - -75 - dBc/Hz

SSB Phase Noise at 1KHz offset - -95 - dBc/Hz

SSB Phase Noise at 10KHz offset - -110 - dBc/Hz

SSB Phase Noise at 100KHz offset - -115 - dBc/Hz

Sub-Harmonics - -60 -50 dBc

Input Characteristics Table 3.0

Parameter Minimum Nominal Maximum Units Note

Disable Input Voltage (Low) (Vil) - -0.3Vcc Vdc 2

Enable Input Voltage (High) (Vih) 0.7Vcc --Vdc 2

LVPECL Output Characteristics Table 4.0

Parameter Minimum Nominal Maximum Units Note

LOAD - - 50 Ohms 3

Voltage (0 to 70°C) (High) (Voh) Vcc-1.025 - Vcc-0.880 Vdc

(-40 to 85°C) (High) (Voh) Vcc-1.085 - Vcc-0.880 Vdc

Voltage (0 to 70°C) (Low) (Vol) Vcc-1.810 - Vcc-1.620 Vdc

(-40 to 85°C) (Low) (Vol) Vcc-1.830 - Vcc-1.555 Vdc

Voltage Swing (Vswing) 0.6 - 1.0 V Peak to Peak

Duty Cycle 45 50 55 % 4

Rise / Fall Time 20% to 80% - - 0.6 ns

Model Specifications

CW 0846

PM123

155.52MHz

2111 Comprehensive Drive

Aurora, Illinois 60505

Phone: 630-851-4722

Fax: 630-851-5040

www.conwin.com

US Headquarters:

630-851-4722

European Headquarters:

+353-61-472221

Bulletin

Page

Revision

Date

Ec262

2of2

P01

11 Aug 2009

Package Characteristics

Environmental Characteristics Table 6.0

Vibration: Vibration per Mil Std 883E Method 2007.3 Test Condition A

Shock: Mechanical Shock per Mil Std 883E Method 2002.4 Test Condition B.

Soldering: SMD product suitable for Convection Reflow soldering. Peak

temperature 260°C. Maximum time above 220°C, 60 seconds.

Solderability Solderability per Mil Std 883E Method 2003

Tape and Reel Specifications

120°C

150°C

180°C

260°C

220°C

360 Sec. Max.

120 S

Max. 10 S

60 S

Max.

Time

Temperature 260°C

LVPECL Output Waveform

Ordering Information

Package Outline

Solder Profile

Suggested Pad Layout

Pad Connections - Enable / Disable Function

Model Matrix

Notes

1) Includes initial tolerance, deviation over temperature, supply and load variations, shock, vibration and 20 years

aging.

2) When the oscillator is disabled, the outputs are at High Impedance. Output is enabled with no connection on pad 1.

3) Output must be terminated into 50 ohms to Vcc – 2V or Thevenin equivalent.

4) Duty Cycle measured at 50% of output swing.

Example: PM123-155.52M = LVPECL Clock, 0 to 70°C, +/-50ppm, 3.3Vdc @ 155.52 MHZ

50%

20%

80%

Duty Cycle

Test Circuit

Vcc R1 / R3 R2 /R4

2.5V 250 Ohms 62.5Ohms

3.3V 130 Ohms 82 Ohms

E/D

N/C

123

654

Type:

LVPECL

Clock Series

5x7mm

Supply Voltage:

2 = 2.5Vdc.

3 = 3.3Vdc.

Temperature Range:

1=0to

2 = -40 to 85

3=0to85

4 = -20 to

70° C

°C

70° C

Frequency Stability:

4 = +/-20

1 = +/-

2 = +/-50

3 = +/-100

ppm

25 ppm

ppm

PM 12155.52M

Output Frequency:

Frequency Format

-xxx.xM Min.*

-xxx.xxxxxxM Max.*

*Amount of numbers

after the decimal point.

M = MHz

Table 5.0

Package Hermetically sealed ceramic package and metal cover.

Soldering Process RoHS compliant, see solder profile on page 2.

Table 7.0

Pad Connection

1 Enable / Disable

2N/C

3 Ground

4 Q Output

5 Q Output

6Vcc

Table 8.0

Enable / Disable

Function (Pad 1) Output

High or Open Enable

Low Disable (High Impedance)

Table 9.0

Frequency

Tolerance

±20ppm

Frequency

Tolerance

±25ppm

Frequency

Tolerance

±50ppm

Frequency

Tolerance

±100ppm

Supply

Voltage

Temperature

Range

PM142 PM112 PM122 PM132 2.5Vdc 0 to 70°C

PM442 PM412 PM422 PM432 2.5Vdc -20 to 70°C

PM342 PM312 PM322 PM332 2.5Vdc 0 to 85°C

x x PM222 PM232 2.5Vdc -40 to 85°C

PM143 PM113 PM123 PM133 3.3Vdc 0 to 70°C

PM443 PM413 PM423 PM433 3.3Vdc -20 to 70°C

PM343 PM313 PM323 PM333 3.3Vdc 0 to 85°C

x x PM223 PM233 3.3Vdc -40 to 85°C

X = Models currently not available

CW 0846

PM123

155.52M

0.069

(1.75mm)

0.275

(7.0mm)

0.197

(5.0mm)