SF1200B (R) * Low Insertion Loss * 5.0 X 7.0 mm Surface-Mount Case * Complies with Directive 2002/95/EC (RoHS) 96.00 MHz Pb SAW Filter Absolute Maximum Ratings Rating Value Units Maximum Incident Power in Passband +10 dBm Max. DC voltage between any 2 terminals 30 VDC Storage Temperature Range -40 to +85 Max Soldering Profile C SMP-03 265C for 10 s Electrical Characteristics Characteristic Nominal Center Frequency Passband Bandwidth Insertion Loss Relative attenuation to I.L @ out of pass band (Rejection) 86.0-----106.0MHz 0-----68.4MHz 76.8MHz 123.6-----162.8MHz 162.8-----1000MHz 86.0-----106.0MHz 86.0-----106.0MHz 86.0-----106.0MHz 86.0-----106.0MHz Sym fC Notes IL 1, 2 Amplitude Ripple (p-p) Amplitude Ripple (p-p) @ 25C Group Delay Ripple (p-p) 1dB Commpression Point Input IP3 Operating Temperature Terminating Impedance Case Style Lid Symbolization (YY=year, WW=week, S=shift) See note 4 1 1, 3 1, 4 1, 4 1, 5 1 1 1 Min Typ 96 Max 8 57 45 65 40 0.9 1.2 120 15 40 12 20 51 40 56 35 12 35 -40 Units MHz MHz dB 1.6 150 +85 50 SMP-03 7 x 5 mm Nominal Footprint RFM SF1200B YYWWS ns dBm dBm C Ohm Notes: 1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 and measured with 50 network analyzer. 2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 3. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. 4. The design, manufacturing process, and specifications of this filter are subject to change. 5. US and international patents may apply. 6. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc. 7. (c)Copyright 1999, RF Monolithics Inc. 8. Electrostatic Sensitive Device. Observe precautions for handling. RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: info@rfm.com http://www.rfm.com SF1200B-111406 Page 1 of 5 96.00 MHz SAW Filter 3 Sep 2003 16:22:45 CH1 S21 LOG 1 dB/ REF -5 dB 1 : 0 . 0000 dB 0 . 000 000 MHz * CH1 Max 1 BW : cent 2 : Markers REF=1 23 . 156042 MHz 96 . 217717 MHz Q: 4 . 1552 PRm 1_ loss Cor 3 CH1 CH2 CENTER S21 : -8 . 1508 dB 4 96 . 000 LOG 000 10 dB/ MHz SPAN REF -10 dB 1 : 0 . 0000 25 . 000 dB 000 0 . 000 000 MHz MHz 1 CH2 Markers REF=1 2 : -55 . 844 dB -34 . 4880 MHz 3 : -44 -19 PRm Cor . 904 . 2000 dB MHz 4 : -65 . 755 dB 27 . 8760 MHz 3 5 : -72 . 333 60 . 0000 2 dB MHz 4 5 CH2 CENTER 96 . 000 000 MHz SPAN 120 . 000 000 MHz 3 Sep 2003 16:36:08 CH1 S11 1 : 43 . 707 1 U FS 9 . 1582 15 . 183 nH 96 . 000 000 MHz 14 . 856 nH 96 . 000 000 MHz * 1 PRm Cor CH2 S22 1 U FS 1 : 46 . 582 8 . 9609 1 PRm Cor START 71 . 000 000 MHz RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. STOP 121 . 000 000 MHz E-mail: info@rfm.com http://www.rfm.com SF1200B-111406 Page 2 of 5 96.00 MHz SAW Filter RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: info@rfm.com http://www.rfm.com SF1200B-111406 Page 3 of 5 96.00 MHz SAW Filter Tape and Reel Specifications "B" REF. 100 REF. "B " Nominal Size Quantity Per Reel Inches millimeters 7 178 500 13 330 2000 See Detail "A" 13. 0 12.0 20 .2 2.0 COMPONENT ORIENTATION and DIMENSIONS Carrier Tape Dimensions Ao 9.4 mm Bo 7.4 mm Ko 2.0 mm Pitch 8.0 mm W 16.0 mm PIN #1 USER DIRECTION OF FEED RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: info@rfm.com http://www.rfm.com SF1200B-111406 Page 4 of 5 96.00 MHz SAW Filter SMP-03 Case 10-Terminal Ceramic Surface-Mount Case 7 x 5 mm Nominal Footprint Case Dimensions Dimension Min 6.80 4.80 A B C D E H J K P Recommended PCB Footprint .47 2.41 0.87 4.87 2.87 1.14 mm Nom 7.00 5.00 1.65 0.60 2.54 1.0 5.00 3.00 1.27 Max 7.20 5.20 2.00 .73 2.67 1.13 5.13 3.13 1.40 Inches Nom 0.276 0.197 0.065 0.024 0.100 0.039 0.197 0.118 0.050 Min 0.268 0.189 0.019 0.095 0.034 0.192 0.113 0.045 Max 0.283 0.205 0.079 0.029 0.105 0.044 0.202 0.123 0.055 Electrical Connections Connection Port 1 Port 2 Terminals Input or Return 10 Return or Input 1 Output or Return 5 Return or Output 6 Ground All others Single Ended Operation Return is ground Differential Operation Return is hot Materials Solder Pad Termination Au plating 30 - 60 uInches (76.2-152 uM) over 80200 uInches (203-508 uM) Ni. Lid Fe-Ni-Co Alloy Electroless Nickel Plate (8-11% Phosphorus) 100-200 uInches Thick Body Al2O3 Ceramic Pb Free C B E H H A J D P K RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: info@rfm.com http://www.rfm.com SF1200B-111406 Page 5 of 5