®
RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 E-mail: info@rfm.com Page 1 of 5
RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 http://www.rfm.com
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. SF1200B-111406
Notes:
1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with
impedance matching to 50 Ω and measured with 50 Ω network analyzer.
2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc.
3. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout
and external impedance matching design. See Application Note No. 42 for details.
4. The design, manufacturing process, and specifications of this filter are subject to change.
5. US and international patents may apply.
6. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc.
7. ©Copyright 1999, RF Monolithics Inc.
8. Electrostatic Sensitive Device. Observe precautions for handling.
Electrical Characteristics
Characteristic Sym Notes Min Typ Max Units
Nominal Center Frequency fC196 MHz
Passband Bandwidth 20 MHz
Insertion Loss 86.0-----106.0MHz IL 1, 2 8 12
dB
Relative attenuation to I.L @
out of pass band (Rejection)
0-----68.4MHz
1, 3
51 57
76.8MHz 40 45
123.6-----162.8MHz 56 65
162.8-----1000MHz 35 40
Amplitude Ripple (p-p) 86.0-----106.0MHz 1, 4 0.9 1.6
Amplitude Ripple (p-p) @ 25°C 86.0-----106.0MHz 1, 4 1.2
Group Delay Ripple (p-p) 86.0-----106.0MHz 1, 5 120 150 ns
1dB Commpression Point 86.0-----106.0MHz 1 12 15 dBm
Input IP3 1 35 40 dBm
Operating Temperature 1-40 +85 °C
Terminating Impedance 50 Ohm
Case Style SMP-03 7 x 5 mm Nominal Footprint
Lid Symbolization (YY=year, WW=week, S=shift) See note 4 RFM SF1200B YYWWS
SMP-03
•Low Insertion Loss
•5.0 X 7.0 mm Surface-Mount Case
•Complies with Directive 2002/95/EC (RoHS)
Absolute Maximum Ratings
Rating Value Units
Maximum Incident Power in Passband +10 dBm
Max. DC voltage between any 2 terminals 30 VDC
Storage Temperature Range -40 to +85 °C
Max Soldering Profile 265°C for 10 s
96.00 MHz
SAW Filter
SF1200B
Pb
96.00 MHz SAW Filter
RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 E-mail: info@rfm.com Page 2 of 5
RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 http://www.rfm.com
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. SF1200B-111406
CH1 S21 LOG 1 dB/ REF -5 dB
CH1 CENTER 96 .000 000 MHz SPAN 25 .000 000 MHz
*
Cor
PRm
CH2 S21 LOG 10 dB/ REF -10 dB
CH2 CENTER 96 .000 000 MHz SPAN 120 .000 000 MHz
*
Cor
PRm
3 Sep 2003 16:22:45
1
2
3 4
1:0.0000 dB 0.000 000 MHz
Max REF=1
CH1 Markers
BW:23 .156042 MHz
cent :96 .217717 MHz
Q:4.1552
1_ loss :-8 .1508 dB
1
2
3
4
5
1:0.0000 dB 0.000 000 MHz
REF=1
CH2 Markers
2:-55 .844 dB
-34 .4880 MHz
3:-44 .904 dB
-19 .2000 MHz
4:-65 .755 dB
27 .8760 MHz
5:-72 .333 dB
60 .0000 MHz
27 .8760 MHz
5:-72
CH1 S11 1 U FS
*
Cor
PRm
CH2 S22 1 U FS
START 71 .000 000 MHz STOP 121 .000 000 MHz
*
Cor
PRm
3 Sep 2003 16:36:08
1
1:43 .707 9.1582 15 .183 nH 96 .000 000 MHz
1
1:46 .582 8.9609 14 .856 nH 96 .000 000 MHz
96.00 MHz SAW Filter
RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 E-mail: info@rfm.com Page 3 of 5
RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 http://www.rfm.com
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. SF1200B-111406
96.00 MHz SAW Filter
RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 E-mail: info@rfm.com Page 4 of 5
RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 http://www.rfm.com
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. SF1200B-111406
Tape and Reel Specifications
“B “
Nominal Size Quantity Per Reel
Inches millimeters
7178 500
13 330 2000
USER DIRECTION OF FEED
COMPONENT ORIENTATION and DIMENSIONS
Carrier Tape Dimensions
Ao 9.4 mm
Bo 7.4 mm
Ko 2.0 mm
Pitch 8.0 mm
W16.0 mm
PIN #1
See Detail "A"
13.0
20.2
2.0
12.0
100 REF.
"B" REF.
96.00 MHz SAW Filter
RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 E-mail: info@rfm.com Page 5 of 5
RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 http://www.rfm.com
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. SF1200B-111406
10-Terminal Ceramic Surface-Mount Case
7 x 5 mm Nominal Footprint
SMP-03 Case
Recommended PCB Footprint
A
BCHE
P
D
H
J
K
Case Dimensions
Dimension mm Inches
Min Nom Max Min Nom Max
A6.80 7.00 7.20 0.268 0.276 0.283
B4.80 5.00 5.20 0.189 0.197 0.205
C1.65 2.00 0.065 0.079
D.47 0.60 .73 0.019 0.024 0.029
E2.41 2.54 2.67 0.095 0.100 0.105
H0.87 1.0 1.13 0.034 0.039 0.044
J4.87 5.00 5.13 0.192 0.197 0.202
K2.87 3.00 3.13 0.113 0.118 0.123
P1.14 1.27 1.40 0.045 0.050 0.055
ElectricalConnections
Connection Terminals
Port 1 Input or Return 10
Return or Input 1
Port 2 Output or Return 5
Return or Output 6
Ground All others
Single Ended Operation Return is ground
Differential Operation Return is hot
Materials
Solder Pad
Termination Au plating 30 - 60 uInches (76.2-152 uM) over 80-
200 uInches (203-508 uM) Ni.
Lid Fe-Ni-Co Alloy Electroless Nickel Plate (8-11%
Phosphorus) 100-200 uInches Thick
Body Al2O3 Ceramic
Pb Free
