1.6x1.5mm BI-COLOR SMD CHIP LED LAMP Part Number: APTB1615ESGC-F01 High Efficiency Red Super Bright Green Features Description z 1.6mmx1.5mm SMT LED, 0.7mm thickness. The High Efficiency Red source color devices are made with z Low power consumption. Gallium Arsenide Phosphide on Gallium Phosphide Orange z Wide viewing angle. Light Emitting Diode. z Ideal for backlight and indicator. The Super Bright Green source color devices are made with z Various colors and lens types available. Gallium Phosphide Green Light Emitting Diode. z Package : 2000pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.008") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAF1101 REV NO: V.7A DATE: MAR/16/2013 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1203002079 Selection Guide Part No. Dice Iv (mcd) [2] @ 20mA Lens Type Min. Typ. 8 15 *3 *7 5 12 *5 *12 Viewing Angle [1] 21/2 High Efficiency Red (GaAsP/GaP) APTB1615ESGC-F01 120 Water Clear Super Bright Green (GaP) Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. *Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength High Efficiency Red Super Bright Green D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 627 565 nm IF=20mA High Efficiency Red Super Bright Green 617 568 nm IF=20mA Spectral Line Half-width High Efficiency Red Super Bright Green 45 30 nm IF=20mA C Capacitance High Efficiency Red Super Bright Green 15 15 pF VF=0V;f=1MHz VF [2] Forward Voltage High Efficiency Red Super Bright Green 2 2.2 2.5 2.5 V IF=20mA IR Reverse Current High Efficiency Red Super Bright Green 10 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter High Efficiency Red Super Bright Green Units Power dissipation 75 62.5 mW DC Forward Current 30 25 mA Peak Forward Current [1] 160 140 mA Reverse Voltage 5 Operating Temperature -40C To +85C Storage Temperature -40C To +85C V Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAF1101 REV NO: V.7A DATE: MAR/16/2013 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1203002079 APTB1615ESGC-F01 High Efficiency Red SPEC NO: DSAF1101 REV NO: V.7A DATE: MAR/16/2013 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1203002079 Super Bright Green SPEC NO: DSAF1101 REV NO: V.7A DATE: MAR/16/2013 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1203002079 APTB1615ESGC-F01 Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAF1101 REV NO: V.7A DATE: MAR/16/2013 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1203002079 PACKING & LABEL SPECIFICATIONS APTB1615ESGC-F01 All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAF1101 REV NO: V.7A DATE: MAR/16/2013 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1203002079