1
MUR3040PT, RURH1540CC, MUR3060PT,
RURH1560CC
15A, 400V - 600V Ultrafast Dual Diodes
MUR3040PT, RURH1540CC, MUR3060PT, and
RURH1560CC are ultrafast dual diodes (trr < 55ns) with
soft recovery characteristics. They have a low forward
voltage drop and are of planar, silicon nitride passivated,
ion-implanted, epitaxial construction.
These devices are intended for use as energy
steering/clamping diodes and rectifiers in a variety of
switching power supplies and other power switching
applications. Their low stored charge and ultrafast recovery
with soft recovery characteristics minimizes ringing and
electrical noise in many power switching circuits thus
reducing power loss in the switching transistor.
Formerly developmental type TA09905.
Symbol
Features
• Ultrafast with Soft Recovery. . . . . . . . . . . . . . . . . . .<55ns
• Operating Temperature. . . . . . . . . . . . . . . . . . . . . . .175oC
• Reverse Voltage Up to . . . . . . . . . . . . . . . . . . . . . . . .600V
• Avalanche Energy Rated
• Planar Construction
Applications
• Switching Power Supply
• Power Switching Circuits
• General Purpose
Packaging JEDEC TO-218AC
Ordering Information
PART NUMBER PACKAGE BRAND
MUR3040PT TO-218AC MUR3040PT
RURH1540CC TO-218AC RURH1540C
MUR3060PT TO-218AC MUR3060PT
RURH1560CC TO-218AC RURH1560C
NOTE: When ordering, use the entire part number.
K
A1A2
ANODE 2
CATHODE
ANODE 1
CATHODE
(FLANGE)
Absolute Maximum Ratings (Per Leg) TC = 25oC, Unless Otherwise Specified
MUR3040PT
RURH1540CC MUR3060PT
RURH1560CC UNITS
Peak Repetitive Reverse Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .VRRM 400 600 V
Working Peak Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VRWM 400 600 V
DC Blocking Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VR400 600 V
Average Rectified Forward Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IF(AV)
(TC = 145oC) 15 15 A
Repetitive Peak Surge Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .IFRM
(Square Wave 20kHz) 42 30 A
Nonrepetitive Peak Surge Current. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .IFSM
(Halfwave 1 Phase 60Hz) 200 200 A
Maximum Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PD100 100 W
Avalanche Energy (See Figures 7 and 8) . . . . . . . . . . . . . . . . . . . . . . . . . . .EAVL 20 20 mJ
Operating and Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . TSTG, TJ-55 to 175 -55 to 175 oC
Data Sheet January 2000 File Number 2774.4
1-888-INTERSIL or 321-724-7143 |Copyright © Intersil Corporation 2000
2
Electrical Specifications (Per Leg) TC = 25oC, Unless Otherwise Specified
SYMBOL TEST CONDITION
MUR3040PT, RURH1540CC MUR3060PT, RURH1560CC
UNITSMIN TYP MAX MIN TYP MAX
VFIF = 15A - - 1.25 - - 1.5 V
IF = 15A, TC = 150oC - - 1.12 - - 1.2 V
IRVR = 400V - - 100 - - - µA
VR = 600V - - - - - 100 µA
VR = 400V, TC = 150oC - - 500 - - - µA
VR = 600V, TC = 150oC - - - - - 500 µA
trr IF = 1A, dIF/dt = 100A/µs--55--55ns
IF = 15A, dIF/dt = 100A/µs--60--60ns
taIF = 15A, dIF/dt = 100A/µs - 30 - - 30 - ns
tbIF = 15A, dIF/dt = 100A/µs - 17 - - 20 - ns
RθJC - - 1.5 - - 1.5 oC/W
DEFINITIONS
VF = Instantaneous forward voltage (pw = 300µs, D = 2%).
IR = Instantaneous reverse current.
trr = Reverse recovery time at dIF/dt = 100A/µs (See Figure 6), summation of ta + tb.
ta = Time to reach peak reverse current at dIF/dt = 100A/µs (See Figure 6).
tb = Time from peak IRM to projected zero crossing of IRM based on a straight line from peak IRM through 25% of IRM (See Figure 6).
RθJC = Thermal resistance junction to case.
pw = pulse width.
D = duty cycle.
Typical Performance Curves
FIGURE 1. FORWARD CURRENT vs FORWARD VOLTAGE FIGURE 2. REVERSE CURRENT vs REVERSE VOLTAGE
80
10
10
IF, FORWARD CURRENT (A)
VF, FORWARD VOLTAGE (V)
0.5 1.0 1.5 2.0
175oC
100oC
25oC
500
100
10
1.0
0.01
0.0010
IR, REVERSE CURRENT (µA)
100 200 300 400 500
VR, REVERSE VOLTAGE (V)
600
0.1
175oC
100oC
25oC
MUR3040PT, RURH1540CC, MUR3060PT, RURH1560CC
3
All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification.
Intersil semiconductor products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time with-
out notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see web site www.intersil.com
FIGURE 3. trr,t
aAND tbCURVES vs FORWARD CURRENT FIGURE 4. CURRENT DERATING CURVE
Typical Performance Curves
60
50
40
30
20
10
01
t, TIME (ns)
IF, FORWARD CURRENT (A)
trr
ta
tb
10 20
16
14
12
10
4
2
0
120 130 140 150 160 170 180
TC, CASE TEMPERATURE (oC)
IF(AV), AVERAGE FORWARD CURRENT (A)
8
6
SQ. WAVE
DC
Test Circuits and Waveforms
FIGURE 5. trr TEST CIRCUIT FIGURE 6. trr WAVEFORMS AND DEFINITIONS
FIGURE 7. AVALANCHE ENERGY TEST CIRCUIT FIGURE 8. AVALANCHE CURRENT AND VOLTAGE
WAVEFORMS
RG
L
VDD
IGBT
CURRENT
SENSE
DUT
VGE t1
t2
VGE AMPLITUDE AND
t1 AND t2CONTROL IF
RG CONTROL dIF/dt
+
-
dt
dIF
IFtrr
tatb
0
IRM
0.25 IRM
DUT
CURRENT
SENSE +
LR
VDD
R < 0.1Ω
EAVL = 1/2LI2 [VR(AVL)/(VR(AVL) - VDD)]
Q1= IGBT (BVCES > DUT VR(AVL))
-
VDD
Q1
I = 1A
L = 40mH
IV
t0t1t2
IL
VAVL
t
IL
MUR3040PT, RURH1540CC, MUR3060PT, RURH1560CC
