PHOTOCOUPLER
PS2832-1,-4,PS2833-1,-4
HIGH COLLECTOR TO EMITTER VOLTAGE
4, 16-PIN SOP PHOTOCOUPLER −NEPOC Series−
DESCRIPTION
The PS2832-1, -4 and PS2833-1, -4 are optically coupled isolators containing a GaAs light emitting diode and an
NPN silicon darlington-connected phototransistor.
The package is an SOP (Small Outline Package) type for high density mounting applications.
FEATURES
• High collector to emitter voltage (VCEO = 300 V: PS2832-1, -4)
(VCEO = 350 V: PS2833-1, -4)
• Small and thin package (4, 16-pin SOP, Pin pitch 1.27 mm)
• High isolation voltage (BV = 2 500 Vr.m.s.)
• High current transfer ratio (CTR = 2 000 % TYP.)
• Ordering number of tape product: PS2832-1-F3, F4, PS2832-4-F3, F4
PS2833-1-F3, F4, PS2833-4-F3, F4
• Safety standards: PS2832-1, -4
• UL approved: File No. E72422 (S)
• BSI approved: No. 8315, 8316
• VDE0884 approved (Option)
PS2833-1, -4
• UL approved: File No. E72422 (S)
APPLICATIONS
• Hybrid IC
• Telephone/Telegraph Receiver
• FAX
The mark shows major revised points.
Document No. PN10257EJ01V0DS (1st edition)
(Previous No. P14023EJ3V0DS00)
Date Published February 2003 CP(K)
PS2832-1,-4,PS2833-1,-4
PACKAGE DIMENSIONS (UNIT: mm)
M
0.12
0.4±0.1 1.27
0.1±0.1
0.1±0.1
4.4
7.0±0.3
0.5±0.3
0.15
+0.10
–0.05
1.27
2.7±0.3
43
12
10.3±0.3
18
16 9
PS2832-1
PS2833-1 PS2832-4
PS2833-4
M
0.12
0.40
+0.10
–0.05
4.4
7.0±0.3
0.5±0.3
0.15
+0.10
–0.05
43
12
12345678
16 15 14 13 12 11 10 9
1. Anode
2. Cathode
3. Emitter
4. Collector
1. 3. 5. 7. Anode
2. 4. 6. 8. Cathode
9. 11. 13. 15. Emitter
10. 12. 14. 16. Collector
2.0±0.1
2.0+0.3
–0.2
MARKING
32 003 Assembly Lot
0 03
Week Assembled
Last number of type No. : 32/33
PS2832-1
PS2833-1
N 0 03
Country Assembled
Type Number
Assembly Lot
No. 1 pin
Mark
PS2832-4
PS2833-4
PS2832-4
N 003
Week Assembled
Year Assembled
(Last 1 Digit)
Year Assembled
(Last 1 Digit) CTR Rank Code
Data Sheet PN10257EJ01V0DS
2
PS2832-1,-4,PS2833-1,-4
ORDERING INFORMATION (Solder Contains Lead)
Part Number Package Packing Style Safety Standards
Approval Application Part
Number*1
PS2832-1 4-pin SOP 50 pcs (Tape 50 pcs cut) Approved products PS2832-1
PS2832-1-F3 Embossed Tape 3 500 pcs/reel other than VDE
PS2832-1-F4
PS2832-4 16-pin SOP Magazine Case 45 pcs PS2832-4
PS2832-4-F3 Embossed Tape 2 500 pcs/reel
PS2832-4-F4
PS2832-1-V 4-pin SOP 50 pcs (Tape 50 pcs cut) VDE0884 approved PS2832-1
PS2832-1-V-F3 Embossed Tape 3 500 pcs/reel (Option)
PS2832-1-V-F4
PS2832-4-V 16-pin SOP Magazine Case 45 pcs PS2832-4
PS2832-4-V-F3 Embossed Tape 2 500 pcs/reel
PS2832-4-V-F4
PS2833-1 4-pin SOP 50 pcs (Tape 50 pcs cut) Approved products PS2833-1
PS2833-1-F3 Embossed Tape 3 500 pcs/reel other than VDE
PS2833-1-F4
PS2833-4 16-pin SOP Magazine Case 45 pcs PS2833-4
PS2833-4-F3 Embossed Tape 2 500 pcs/reel
PS2833-4-F4
*1 For the application of the Safety Standard, following part number should be used.
Data Sheet PN10257EJ01V0DS 3
PS2832-1,-4,PS2833-1,-4
ORDERING INFORMATION (Pb-Free)
Part Number Package Packing Style Safety Standards
Approval Application Part
Number*1
PS2832-1-A 4-pin SOP 50 pcs (Tape 50 pcs cut) Approved products PS2832-1
PS2832-1-F3-A Embossed Tape 3 500 pcs/reel other than VDE
PS2832-1-F4-A
PS2832-4-A 16-pin SOP Magazine Case 45 pcs PS2832-4
PS2832-4-F3-A Embossed Tape 2 500 pcs/reel
PS2832-4-F4-A
PS2832-1-V-A 4-pin SOP 50 pcs (Tape 50 pcs cut) VDE0884 approved PS2832-1
PS2832-1-V-F3-A Embossed Tape 3 500 pcs/reel (Option)
PS2832-1-V-F4-A
PS2832-4-V-A 16-pin SOP Magazine Case 45 pcs PS2832-4
PS2832-4-V-F3-A Embossed Tape 2 500 pcs/reel
PS2832-4-V-F4-A
PS2833-1-A 4-pin SOP 50 pcs (Tape 50 pcs cut) Approved products PS2833-1
PS2833-1-F3-A Embossed Tape 3 500 pcs/reel other than VDE
PS2833-1-F4-A
PS2833-4-A 16-pin SOP Magazine Case 45 pcs PS2833-4
PS2833-4-F3-A Embossed Tape 2 500 pcs/reel
PS2833-4-F4-A
*1 For the application of the Safety Standard, following part number should be used.
Data Sheet PN10257EJ01V0DS
4
PS2832-1,-4,PS2833-1,-4
ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise specified)
Ratings
Parameter Symbol
PS2832-1 PS2833-1 PS2832-4 PS2833-4 Unit
Diode Forward Current (DC) IF 50 mA
Reverse Voltage VR 6 V
Power Dissipation Derating
∆
PD/°C 0.6 0.8 mW/°C
Power Dissipation PD 60 80 mW/ch
Peak Forward Current*1 IFP 1 A
Transistor Collector to Emitter Voltage VCEO 300 350 300 350 V
Emitter to Collector Voltage VECO 0.3 V
Collector Current IC 60 mA/ch
Power Dissipation Derating
∆
PC/°C 1.2 mW/°C
Power Dissipation PC 120 mW/ch
Isolation Voltage*2 BV 2 500 Vr.m.s.
Operating Ambient Temperature TA −55 to +100 °C
Storage Temperature Tstg −55 to +150 °C
*1 PW = 100
µ
s, Duty Cycle = 1 %
*2 AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output
Data Sheet PN10257EJ01V0DS 5
PS2832-1,-4,PS2833-1,-4
ELECTRICAL CHARACTERISTICS (TA = 25 °C)
Parameter Symbol Conditions MIN. TYP. MAX. Unit
Diode Forward Voltage VF IF = 10 mA 1.2 1.4 V
Reverse Current IR VR = 5 V 5
µ
A
Terminal Capacitance Ct V = 0 V, f = 1 MHz 15 pF
Transistor Collector to Emitter Dark
Current ICEO IF = 0 mA, VCE = 300 V 400 nA
Coupled Current Transfer Ratio
(IC/IF) CTR IF = 1 mA, VCE = 2 V 400 2 000 4 500 %
Collector Saturation Voltage VCE (sat) IF = 1 mA, IC = 2 mA 1.0 V
Isolation Resistance RI-O VI-O = 1 kVDC 1011
Ω
Isolation Capacitance CI-O V = 0 V, f = 1 MHz 0.4 pF
Rise Time*1 tr VCC = 5 V, IC = 10 mA, RL = 100 Ω 20
µ
s
Fall Time*1 tf 5
*1 Test circuit for switching time
VCC
VOUT
RL = 100 Ω
IF
50 Ω
Pulse Input
PW = 1 ms
Duty cycle = 1/10
In monitor
Data Sheet PN10257EJ01V0DS
6
PS2832-1,-4,PS2833-1,-4
TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise specified)
–50 –25 025 50 75 100
10 000
100 000
1 000
100
10
1
Collector to Emitter Dark Current ICEO (nA)
Ambient Temperature TA (˚C)
COLLECTOR TO EMITTER DARK
CURRENT vs. AMBIENT TEMPERATURE
Ambient Temperature TA (˚C)
Diode Power Dissipation PD (mW)
DIODE POWER DISSIPATION vs.
AMBIENT TEMPERATURE
25 50 75 100
100
80
60
40
20
0
0.8 mW/˚C
0.6 mW/˚C
PS2832-4
PS2833-4
PS2832-1
PS2833-1 1.2 mW/˚C
PS2832-1, -4
PS2833-1, -4
25 50 75 100
120
100
80
60
40
20
0
Transistor Power Dissipation PC (mW)
Ambient Temperature TA (˚C)
TRANSISTOR POWER DISSIPATION
vs. AMBIENT TEMPERATURE
100
50
10
5
1
0.5
0.1
0.7 0.9 1.1 1.3 1.50.8 1.0 1.2 1.4
Forward Current IF (mA)
Forward Voltage VF (V)
FORWARD CURRENT vs.
FORWARD VOLTAGE
0 ˚C
–25 ˚C
–50 ˚C
TA = +100 ˚C
+60 ˚C
+25 ˚C
Collector Current IC (mA)
Collector to Emitter Voltage VCE (V)
COLLECTOR CURRENT vs.
COLLECTOR TO EMITTER VOLTAGE
12345
100
50
10
5
10
1 mA
5 mA 3 mA 2 mA
IF = 0.5 mA
Collector Current IC (mA)
Collector Saturation Voltage VCE (sat) (V)
COLLECTOR CURRENT vs.
COLLECTOR SATURATION VOLTAGE
0.4 0.6 0.8 1.0 1.2 1.4 1.6
100
50
10
5
1
IF = 0.5 mA
1 mA
5 mA
2 mA
3 mA
CTR = 1 068 %
2 290 %
4 360 %
VCEO = 300 V
Data Sheet PN10257EJ01V0DS 7
PS2832-1,-4,PS2833-1,-4
V
CC
= 10 V,
I
C
= 10 mA,
CTR = 2 300 %
1 000
100
10
1
0.110 50 100 500 1000
Load Resistance R
L
(Ω)
SWITCHING TIME vs.
LOAD RESISTANCE
Switching Time t ( s)
µ
Normalized to 1.0
at T
A
= 25 ˚C,
I
F
= 1 mA, V
CE
= 2 V
Normalized Current Transfer Ratio CTR
Ambient Temperature T
A
(˚C)
NORMALIZED CURRENT TRANSFER
RATIO vs. AMBIENT TEMPERATURE
–50 –25 025 50 75 100
1.4
1.0
1.2
0.8
0.6
0.4
0.2
0.0
Current Transfer Ratio CTR (%)
Forward Current I
F
(mA)
CURRENT TRANSFER RATIO vs.
FORWARD CURRENT
0.1 1
0.5 105 40
4 000
4 500
3 500
3 000
2 500
2 000
1 500
1 000
500
0
I
F
= 1 mA T
A
= 25 ˚C
60 ˚C
Time (Hr)
CTR (Relative Value)
LONG TERM CTR DEGRADATION
10 10
2
10
3
10
4
10
5
10
6
1.2
1.0
0.8
0.6
0.4
0.2
0.0
;;
t
r
t
f
t
d
t
s
V
CE
= 2 V
Sample A
B
C
Remark The graphs indicate nominal characteristics.
Data Sheet PN10257EJ01V0DS
8
PS2832-1,-4,PS2833-1,-4
TAPING SPECIFICATIONS (UNIT: mm)
Outline and Dimensions (Reel)
Packing: 3 500 pcs/reel
2.0±0.5
R 1.0
13.0±0.2
φ
21.0±0.8
φ
Tape Direction
PS2832-1-F3
PS2833-1-F3
PS2832-1-F4
PS2833-1-F4
Outline and Dimensions (Tape)
1.55±0.1
4.0±0.1
2.0±0.1
4.0±0.1
1.75±0.1
2.8 MAX.
7.55±0.1
0.3
7.5±0.1
16.0±0.3
2.85±0.1 2.3±0.1
1.5+0.1
–0
φ
330±2.0
φ
100±1.0
φ
2.0±0.5
15.9 to 19.4
Outer edge of
flange
21.5±1.0
17.5±1.0
32
003
32
003
32
003
32
003
32
003
32
003
32
003
32
003
32
003
32
003
Data Sheet PN10257EJ01V0DS 9
PS2832-1,-4,PS2833-1,-4
Tape Direction
PS2832-4-F3
PS2833-4-F3
PS2832-4-F4
PS2833-4-F4
Outline and Dimensions (Reel)
Packing: 2 500 pcs/reel
2.0±0.5
R 1.0
13.0±0.2
φ
21.0±0.8
φ
Outline and Dimensions (Tape)
1.55±0.1
12.0±0.1
2.0±0.1
4.0±0.1
1.75±0.1
16.0±0.3
8.3±0.1
2.8 MAX.
10.7±0.1
0.3
2.3±0.1
7.5±0.1
1.5
+0.1
–0
φ
330±2.0
φ
100±1.0
φ
2.0±0.5
15.9 to 19.4
Outer edge of
flange
21.5±1.0
17.5±1.0
Data Sheet PN10257EJ01V0DS
10
PS2832-1,-4,PS2833-1,-4
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
• Peak reflow temperature 260°C or below (package surface temperature)
• Time of peak reflow temperature 10 seconds or less
• Time of temperature higher than 220°C 60 seconds or less
• Time to preheat temperature from 120 to 180°C 120±30 s
• Number of reflows Three
• Flux Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
120±30 s
(preheating)
220˚C
180˚C
Package Surface Temperature T (˚C)
Time (s)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
to 60 s
260˚C MAX.
120˚C
(2) Wave soldering
• Temperature 260°C or below (molten solder temperature)
• Time 10 seconds or less
• Preheating conditions 120°C or below (package surface temperature)
• Number of times One (Allowed to be dipped in solder including plastic mold portion.)
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between
collector-emitters at startup, the output side may enter the on state, even if the voltage is within the absolute
maximum ratings.
Data Sheet PN10257EJ01V0DS 11
PS2832-1,-4,PS2833-1,-4
USAGE CAUTIONS
1. Protect against static electricity when handling.
2. Avoid storage at a high temperature and high humidity.
Data Sheet PN10257EJ01V0DS
12
4590 Patrick Henry Drive
Santa Clara, CA 95054-1817
Telephone: (408) 919-2500
Facsimile:
(
408
)
988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant
with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous
Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive
2003/11/EC Restriction on Penta and Octa BDE.
CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates
that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are
exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals.
All devices with these suffixes meet the requirements of the RoHS directive.
This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that
go into its products as of the date of disclosure of this information.
Restricted Substance
per RoHS Concentration Limit per RoHS
(values are not yet fixed) Concentration contained
in CEL devices
-A -AZ
Lead (Pb) < 1000 PPM Not Detected (*)
Mercury < 1000 PPM Not Detected
Cadmium < 100 PPM Not Detected
Hexavalent Chromium < 1000 PPM Not Detected
PBB < 1000 PPM Not Detected
PBDE < 1000 PPM Not Detected
If you should have any additional questions regarding our devices and compliance to environmental
standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance
content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information
provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better
integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate
information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL
suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for
release.
In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to
customer on an annual basis.
See CEL Terms and Conditions for additional clarification of warranties and liability.
