Voidless-Hermetically-Sealed Surface
Mount Bidirectional Transient Suppressors
WWW.Microsemi .COM
SCOTTSDALE DIVISION
1N6103US thru 1N6137AUS
and 1N6139US thru 1N6173AUS
1N6103US – 1N6137AUS
1N6139US
DESCRIPTION APPEARANCE
This surface mount series of industry recognized voidless-hermetically-
sealed Bidirectional Transient Voltage Suppressor (TVS) designs is
military qualified to MIL-PRF-19500/516 and are ideal for high-reliability
applications where a failure cannot be tolerated. They provide a Working
Peak “Standoff” Voltage selection from 5.2 to 152 Volts with two package
sizes for 500 W and 1500 W ratings. They are very robust in hard-glass
construction and also use an internal metallurgical bond identified as
Category I for high-reliability applications. Both of these are also military
qualified to MIL-PRF-195 00/516 a nd are av ailable as bot h a non s uffix part
and an “A” suffix part involving different voltage tolerances as further
described in note 4 on page 2. These devices are also available in axial-
leaded packages for thru-hole mounting by deleting the “US” suffix (see
separate data sheet for 1N6103 thru 1N6173A). Microsemi also offers
numerous other TVS products to meet higher and lower peak pulse po wer
and voltage ratings in both through-hole and surface-mount packages.
Package “E”
(or “D-5B”)
Package “G”
(or “D-5C”)
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
1N6173AUS
FEATURES APPLIC ATIONS / BENE FITS
High surge current and peak pulse power provid es
transient voltage protection for sensitive circuits
Triple-layer passivation
Internal Category I” metallurgical bonds
Voidless hermetically s ealed glass package
JAN/TX/TXV military qualifications available per MIL-PRF-
19500/516 by adding JAN, JANTX, or JANT XV prefix
(consult factory for 1N6103US and 1N6138US)
JANS available for 1N6103AUS thru 1N6118AUS per
MIL-PRF-19500/516 as well as further option s for
screening in accordance with MIL-PRF-19500 for JANS
on all others in this series by using a “MSP” prefix, e.g.
MSP6119AUS, MSP6143AUS , etc.
Axial-leaded e quivalents also availabl e (see separate
data sheet for 1N6103 thru 1N6173)
Military and other high reliability transient protection
Extremely robust construction
Extensive range in Working Peak “Standoff”
Voltage (VWM) from 5.7 to 152 V
Available as either 500 W or 1500 W Peak Pulse
Power (PPP) using two different size packages
ESD and EFT protection per IEC61 00-4-2 and
IEC61000-4-4 respectively
Secondary lightning protection per select levels in
IEC61000-4-5
Square-end-cap terminals for easy placement
Nonsensitive to ESD per MIL-STD-750 Method
1020
Inherently radiation hard as described in Microsemi
MicroNote 050
MAXIMUM RAT ING S MECHANICAL AND PACKAGING
Operating (TJ) & Storage Temperature: -55oC to +175oC
Peak Pulse Power (PPP) at 25oC: 500 W for 1N6103US to
1N6137AUS and 1500 W for 1N6139US to 1N6173AUS @
10/1000 µs (also see Figures 1,2 and 3)
Impulse repetition rate (duty factor): 0.01%
Steady-State Power: 3.0 W for 1N6103US to 1N6137AUS
and 5.0 W for 1N6139US to 1N6173AUS up to TEC = 150oC.
Linearly derate above TEC =150oC to zero at TEC =175oC.
Steady-State Power: 2.0 W for 1N6103US to 1N6137AUS
and 3.0 W for 1N6139US to 1N6173AUS @ TA = 25oC (see
note and Figure 4 for linear derating at higher temperatures)
Thermal Resistance (junction to endcap): 8.3 oC/W for
1N6103US to 1N6137AUS a nd 5.0 oC/W for 1N6139US to
1N6173AUS
Solder Temperatures: 260oC for 10 s (maximum)
CASE: Hermetically sealed voidless hard glass with
Tungsten slugs
TERMINATIONS: End caps are Copper with
Tin/Lead (Sn/Pb) finish. Note Previous inve ntory
had solid Silver (Ag) with Tin/Lead (Sn/Pb) fin ish.
MARKING: None
POLARITY: No polarity marking for these
bidirectional TVSs
Tape & Reel option: Standard per EIA-481-B
Weight: 539 mg for 500 Watt (E Package)
1100 mg for 1500 Watt (G Package)
See package dimensions and recommended pad
layouts on last page for both the “E” (D-5B) and “G”
(D-5C) size packages
NOTE: Steady-state power ratings with reference to ambient are for PC boards where thermal resistance from
Microsemi
Scottsdale Division Page 1
mounting point to ambient is sufficiently cont rolled where TOP or TJ(MAX) is not exceeded
Copyright © 2008
05-06-2008 REV D 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Voidless-Hermetically-Sealed Surface
Mount Bidirectional Transient Suppressors
WWW.Microsemi .COM
SCOTTSDALE DIVISION
1N6103US thru 1N6137AUS
and 1N6139US thru 1N6173AUS
1N6103US – 1N6137AUS
1N6139US
ELECTRICAL CHARACTERISTICS
INDUSTRY TYPE
NUMBER
(Note 4)
PPP Rating
MINIMUM
BREAKDOWN
VOLTAGE
V(BR) @ I(BR)
RATED
STANDOFF
VOLTAGE
VWM
MAXIMUM
STANDBY
CURRENT
ID@ VWM
500W 1500W
MAXIMUM
CLAMPING
VOLTAGE
VC @ IPP
MAXIMUM
PEAK PULSE
CURRENT IPP
500 W 1500 W
MAXIMUM
TEMP.
COEF. OF
V(BR)
500W 1500W Volts mA Volts uA uA Volts Amps Amps %/oC
1N6103AUS 1N6139AUS 7.13 175 5.7 50 300 11.2 44.6 133.9 .06
1N6104AUS 1N6140AUS 7.79 150 6.2 20 100 12.1 41.3 124.0 .06
1N6105AUS 1N6141AUS 8.65 150 6.9 20 100 13.4 37.3 111.9 .06
1N6106AUS 1N6142AUS 9.50 125 7.6 20 100 14.5 34.5 103.4 .07
1N6107AUS 1N6143AUS 10.45 125 8.4 20 20 15.6 32.0 96.2 .07
1N6108AUS 1N6144AUS 11.40 100 9.1 20 20 16.9 29.6 88.8 .07
1N6109AUS 1N6145AUS 12.35 100 9.9 20 20 18.2 27.5 82.4 .08
1N6110AUS 1N6146AUS 14.25 75 11.4 20 20 21.0 23.8 71.4 .08
1N6111AUS 1N6147AUS 15.20 75 12.2 20 20 22.3 22.4 67.3 .08
1N6112AUS 1N6148AUS 17.10 65 13.7 1 10 25.1 19.9 59.8 .085
1N6113AUS 1N6149AUS 19.0 65 15.2 1 5 27.7 18.0 54.2 .085
1N6114AUS 1N6150AUS 20.9 50 16.7 1 5 30.5 16.4 49.2 .085
1N6115AUS 1N6151AUS 22.8 50 18.2 1 5 33.3 15.0 45.0 .09
1N6116AUS 1N6152AUS 25.7 50 20.6 1 5 37.4 13.4 40.1 .09
1N6117AUS 1N6153AUS 28.5 40 22.8 1 5 41.6 12.0 36.0 .09
1N6118AUS 1N6154AUS 31.4 40 25.1 1 5 45.7 10.9 32.8 .095
1N6119AUS 1N6155AUS 34.2 30 27.4 1 5 49.9 10.0 30.1 .095
1N6120AUS 1N6156AUS 37.1 30 29.7 1 5 53.6 9.3 28.0 .095
1N6121AUS 1N6157AUS 40.9 30 32.7 1 5 59.1 8.5 25.4 .095
1N6122AUS 1N6158AUS 44.7 25 35.8 1 5 64.6 7.7 23.2 .095
1N6123AUS 1N6159AUS 48.5 25 38.8 1 5 70.1 7.1 21.4 .095
1N6124AUS 1N6160AUS 53.2 20 42.6 1 5 77.0 6.5 19.5 .095
1N6125AUS 1N6161AUS 58.9 20 47.1 1 5 85.3 5.9 17.6 .100
1N6126AUS 1N6162AUS 64.6 20 51.7 1 5 97.1 5.1 15.4 .100
1N6127AUS 1N6163AUS 71.3 20 56.0 1 5 103.1 4.8 14.5 .100
1N6128AUS 1N6164AUS 77.9 15 62.2 1 5 112.8 4.4 13.3 .100
1N6129AUS 1N6165AUS 86.5 15 69.2 1 5 125.1 4.0 12.0 .100
1N6130AUS 1N6166AUS 95.0 12 76.0 1 5 137.6 3.6 10.9 .100
1N6131AUS 1N6167AUS 104.5 12 86.6 1 5 151.3 3.3 9.9 .100
1N6132AUS 1N6168AUS 114.0 10 91.2 1 5 165.1 3.0 9.1 .100
1N6133AUS 1N6169AUS 123.5 10 98.8 1 5 178.8 2.8 8.4 .105
1N6134AUS 1N6170AUS 142.5 8 114.0 1 5 206.3 2.4 7.3 .105
1N6135AUS 1N6171AUS 152.0 8 121.6 1 5 218.4 2.3 6.9 .105
1N6136AUS 1N6172AUS 171.0 5 136.8 1 5 245.7 2.0 6.1 .110
1N6137AUS 1N6173AUS 190.0 5 152.0 1 5 273.0 1.8 5.5 .110
Note: 4 1 1 1 2 3 1 2 3 1
Notes: 1. Applies to both 500W and 1500W series for devices shown (see note 4)
2. Applies only to 500W series (1N6103US thru 1N6137US)
3. Applies only to 1500W series (1N6139US thru 1N6173AUS)
4. Part number without the A suffix has 5% higher VC, 5% lower minimum V(BR), and 5% lower IPP.
1N6173AUS
SYMBOLS & DEFINITI ONS
Symbol Definition
VBR Minimum Breakdown Voltage: The minimu m voltage the device will exhibit at a specifi ed current.
VWM Working Peak Voltage: The maximum peak voltage th at can be ap plied over the operating temperature range.
This is also referred to as Standoff Voltage.
ID Maximum Standoff Current: The maximum current that will flow at the specified voltage and temperature.
VC Maximum clamping voltage at specified IPP (Peak Pulse Current) at the specified pulse conditions.
PPP Peak Pulse Power: The peak power dissipation resulting from the peak impulse current IPP.
Microsemi
Scottsdale Division Page 2
Copyright © 2008
05-06-2008 REV D 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Voidless-Hermetically-Sealed Surface
Mount Bidirectional Transient Suppressors
WWW.Microsemi .COM
SCOTTSDALE DIVISION
1N6103US thru 1N6137AUS
and 1N6139US thru 1N6173AUS
1N6103US – 1N6137AUS
1N6139US
GRAPHS
Microsemi
Scottsdale Division Page 3
Copyright © 2008
05-06-2008 REV D
1N6173AUS
PULSE TIME (tp)
FIGURE 1
PEAK PULSE POWER vs. PULSE TIME
MAX PEAK PULSE POWER (PPP) OR
CURRENT (IPP) IN PERCENT OF MAX RATINGS
Peak Pulse Power (PPP)
100 1000 10,000
JUNCTION TEMPERATURE (TJ) IN oC
FIGURE 2
PULSE DERATING CURVE
(prior to impulse)
PULSE CURRENT (IPP)
IN PERCENT OF I
PP
TIME (t) IN MILLISECONDS
FIGURE 3
PULSE WAVE FORM
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Voidless-Hermetically-Sealed Surface
Mount Bidirectional Transient Suppressors
WWW.Microsemi .COM
SCOTTSDALE DIVISION
1N6103US thru 1N6137AUS
and 1N6139US thru 1N6173AUS
1N6103US – 1N6137AUS
1N6139US
MAXIMUM STEADY-STATE POWER IN WATTS
FIGURE 4
STEADY-STATE DERATING CURVE
FOR FREE-AIR MOUNTING ON PC BOARD
PACKAGE DIMENSIONS and PAD LAYOUTS
E-MELF-PKG (D-5B)
for 1N6103US thru 1N6137AUS (500 W)
Microsemi
Scottsdale Division Page 4
Copyright © 2008
05-06-2008 REV D
1N6173AUS
Note: If mounting requires adhesive separate from the solder,
an additional 0.080 inch diameter contact may be placed in the
center between the pads as an optional spot for cement as
shown in the pad layout.
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Voidless-Hermetically-Sealed Surface
Mount Bidirectional Transient Suppressors
WWW.Microsemi .COM
SCOTTSDALE DIVISION
1N6103US thru 1N6137AUS
and 1N6139US thru 1N6173AUS
1N6103US – 1N6137AUS
1N6139US
PACKAGE DIMENSIONS and PAD LAYOUTS
G-MELF-PKG (D-5C)
for 1N6139US thru 1N6173AUS (1500 W)
Note: If mounting requires adhesive separate from the solder,
an additional 0.090 inch diameter contact may be placed in the
center between the pads as an optional spot for cement as
shown in the pad layout.
1N6173AUS
Microsemi
Scottsdale Division Page 5
Copyright © 2008
05-06-2008 REV D 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503