LM148 LM248 LM348 FOUR UA741 QUAD BIPOLAR OPERATIONAL AMPLIFIERS LOW SUPPLY CURRENT: 0.53mA/AMPLIFIER CLASS AB OUTPUT STAGE: NO CROSS OVER DISTORTION PIN COMPATIBLE WITH LM124 LOW INPUT OFFSET VOLTAGE: 1mV LOW INPUT OFFSET CURRENT: 2nA N DIP14 (Plastic Package) LOW INPUT BIAS CURRENT: 30nA GAIN BANDWIDTH PRODUCT: 1.3MHz HIGH DEGREE OF ISOLATION BETWEEN AMPLIFIERS: 120dB OVERLOAD PROTECTION FOR INPUTS AND OUTPUTS DESCRIPTION The LM148 consists of four independent, high gain internally compensated, low power operational amplifiers which have been designed to provide functional characteristics identical to those of the familiar UA741 operational amplifier. In addition the total supply current for all four amplifiers is compatible to the supply current of a single UA741 type op amp. Other features include input offset current and input bias current which are much less than those of a standard UA741. Also, excellent isolation between amplifiers has been achieved by independently biasing each amplifier and using layout techniques qhich minimize thermal coupling. The LM148 can be used anywhere multiple UA741 type amplifiers are being used and in applications where amplifier matching or high packaing density is required. ORDER CODE Part Number Temperature Range LM148 -55C, +125C LM248 -40C, +105C LM348 0C, +70C Example : LM348D D SO14 (Plastic Micropackage) PIN CONNECTIONS (top view) 14 Output 4 Output 1 1 Inverting Input 1 2 - - 13 Inverting Input 4 Non-inverting Input 1 3 + + 12 Non-inverting Input 4 11 VCC - VCC + 4 Non-inverting Input 2 5 + + 10 Non-inverting Input 3 Inverting Input 2 6 - - 9 Inverting Input 3 8 Output 3 Output 2 7 Package N D * * * * * * N = Dual in Line Package (DIP) D = Small Outline Package (SO) - also available in Tape & Reel (DT) March 2002 1/5 LM148-LM248-LM348 SCHEMATIC DIAGRAM Vcc+ 25W Inverting input Non-inverting input Output 350kW 7.4pF Vcc+ 2.5kW Vcc+ 60W 340W 60kW 36kW Vcc- ABSOLUTE MAXIMUM RATINGS Symbol VCC Parameter LM348 Unit 22 V 1) 22 V 44 V Input Voltage Vid Differential Input Voltage Output Short-circuit Duration 2) Power Dissipation Toper Operating Free-air Temperature Range Tstg Storage Temperature Range 2/5 LM248 Supply voltage Vi Ptot 1. 2. LM148 Infinite 500 -55 to +125 -40 to +105 -65 to +150 mW 0 to +70 C C For supply voltage less than maximum value, the absolute maximum input voltage is equal to the supply voltage. Any of the amplifier outputs can be shorted to ground indefinitly; however more than one should not be simultaneously shorted as the maximum junction will be exceeded. LM148-LM248-LM348 ELECTRICAL CHARACTERISTICS VCC = 15V, Tamb = 25C (unless otherwise specified) Symbol Parameter Min. Typ. Max. Unit Vio Input Offset Voltage (Rs 10k) Tamb = 25C Tmin Tamb Tmax 1 5 6 mV Iio Input Offset Current Tamb = 25C Tmin Tamb Tmax 2 25 75 nA Iib Input Bias Current Tamb = 25C Tmin Tamb Tmax 30 100 300 nA Avd Large Signal Voltage Gain (Vo = 10V, RL = 2k) Tamb = 25C Tmin Tamb Tmax 50 25 160 V/mV SVR Supply Voltage Rejection Ratio (Rs 10k) Tamb = 25C Tmin Tamb Tmax 77 77 100 dB Icc Supply Current, all Amp, no load Tamb = 25C Tmin Tamb Tmax 2.1 3.6 4.8 mA Vicm Input Common Mode Voltage Range Tamb = 25C Tmin Tamb Tmax 12 12 CMR Common Mode Rejection Ratio (Rs 10k) Tamb = 25C Tmin Tamb Tmax 70 70 110 Output Short-circuit Current Tamb = 25C 10 25 12 10 12 10 13 12 V 0.25 0.5 V/s Ios Output Voltage Swing Tamb = 25C Vopp Tmin Tamb Tmax RL 10k RL 2k RL 10k RL 2k dB 35 mA SR Slew Rate (VI = 10V, RL = 10k, CL = 100pF, unity Gain) tr Rsie Time (VI = 10V, RL = 10k, CL = 100pF, unity Gain) 0.3 s KOV Overshoot (VI = 10V, RL = 10k, CL = 100pF, unity Gain) 5 % M RI Input Resistance 0.8 2.5 GBP Gain Bandwith Product (VI = 10 mV, RL = 10k, CL = 100pF f =100kHz) 0.7 1.3 THD Total Harmonic Distortion (f = 1kHz, Av = 20dB, RL = 10k CL = 100pF, Vo = 2Vpp) en Equivalent Input Noise Voltage (f = 1kHz, Rs = 100 Vo1/Vo2 Channel Separation 0.08 MHz % 40 nV -----------Hz 120 dB 3/5 LM148-LM248-LM348 PACKAGE MECHANICAL DATA 14 PINS - PLASTIC PACKAGE Millimeters Inches Dimensions Min. a1 B b b1 D E e e3 F i L Z 4/5 Typ. 0.51 1.39 Max. Min. 1.65 0.020 0.055 0.5 0.25 Typ. 0.065 0.020 0.010 20 0.787 8.5 2.54 15.24 0.335 0.100 0.600 7.1 5.1 0.280 0.201 3.3 1.27 Max. 0.130 2.54 0.050 0.100 LM148-LM248-LM348 PACKAGE MECHANICAL DATA 14 PINS - PLASTIC MICROPACKAGE (SO) G c1 b1 e a1 b A a2 C L s e3 E D M 8 1 7 F 14 Millimeters Inches Dimensions Min. A a1 a2 b b1 C c1 D (1) E e e3 F (1) G L M S Typ. Max. Min. 1.75 0.2 1.6 0.46 0.25 0.1 0.35 0.19 Typ. 0.069 0.008 0.063 0.018 0.010 0.004 0.014 0.007 0.5 Max. 0.020 45 (typ.) 8.55 5.8 8.75 6.2 0.336 0.228 1.27 7.62 3.8 4.6 0.5 0.344 0.244 0.050 0.300 4.0 5.3 1.27 0.68 0.150 0.181 0.020 0.157 0.208 0.050 0.027 8 (max.) Note : (1) D and F do not include mold flash or protrusions - Mold flash or protrusions shall not exceed 0.15mm (.066 inc) ONLY FOR DATA BOOK. Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. (c) The ST logo is a registered trademark of STMicroelectronics (c) 2002 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States (c) http://www.st.com 5/5