2N2219, 2N2219A, 2N2219AL Small Signal Switching Transistor NPN Silicon http://onsemi.com Features COLLECTOR 3 * MIL-PRF-19500/251 Qualified * Available as JAN, JANTX, and JANTXV 2 BASE MAXIMUM RATINGS (TA = 25C unless otherwise noted) Characteristic Symbol Value Unit Collector -Emitter Voltage VCEO 50 Vdc Collector -Base Voltage VCBO 75 Vdc Emitter -Base Voltage VEBO 6.0 Vdc Collector Current - Continuous IC 800 mAdc Total Power Dissipation @ TA = 25C PT 0.8 W Total Power Dissipation @ TC = 25C PT 3.0 W TJ, Tstg -65 to +200 C Symbol Max Unit RqJC 50 C/W Operating and Storage Junction Temperature Range 1 EMITTER TO-39 CASE 205AB (2N2219, 2N2219A) THERMAL CHARACTERISTICS Characteristic Thermal Resistance, Junction to Case Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. TO-5 CASE 205AA (2N2219AL) ORDERING INFORMATION Device Package Shipping TO-39 Bulk TO-5 Bulk JAN2N2219/A JANTX2N2219/A JANTXV2N2219/A JAN2N2219AL JANTX2N2219AL JANTXV2N2219AL (c) Semiconductor Components Industries, LLC, 2012 August, 2012 - Rev. 1 1 Publication Order Number: 2N2219/D 2N2219, 2N2219A, 2N2219AL ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) Symbol Characteristic Min Max Unit 30 50 - - - - - 10 10 10 mAdc mAdc nAdc - - 10 10 nAdc nAdc - - - - 10 10 10 10 nAdc mAdc nAdc mAdc 35 50 50 75 75 100 100 30 - - 325 325 - - 300 - - - - - 0.4 0.3 1.6 1.0 0.6 0.6 - - 1.3 1.2 2.6 2.0 2.5 12 50 75 - - - 8.0 - 25 - - 40 35 - - 250 300 OFF CHARACTERISTICS Collector -Emitter Breakdown Voltage (IE = 10 mAdc) 2N2219 2N2219A/AL Emitter-Base Cutoff Current (VEB = 5.0 Vdc) (VEB = 6.0 Vdc) (VEB = 4.0 Vdc) 2N2219 2N2219A/AL All Collector-Emitter Cutoff Current (VCE = 30 Vdc) (VCE = 50 Vdc) 2N2219 2N2219A/AL Collector-Base Cutoff Current (VCB = 50 Vdc) (VCB = 60 Vdc) (VCB = 60 Vdc) (VCB = 75 Vdc) 2N2219 2N2219 2N2219A/AL 2N2219A/AL V(BR)CEO IEBO ICES ICBO Vdc ON CHARACTERISTICS (Note 1) DC Current Gain (IC = 0.1 mAdc, VCE = 10 Vdc) 2N2219 2N2219A/AL 2N2219 2N2219A/AL 2N2219 2N2219A/AL 2N2219/A/AL 2N2219/A/AL (IC = 1.0 mAdc, VCE = 10 Vdc) (IC = 10 mAdc, VCE = 10 Vdc) (IC = 150 mAdc, VCE = 10 Vdc) (IC = 500 mAdc, VCE = 10 Vdc) Collector -Emitter Saturation Voltage (IC = 150 mAdc, IB = 15 mAdc) 2N2219 2N2219A/AL 2N2219 2N2219A/AL (IC = 500 mAdc, IB = 50 mAdc) Base -Emitter Saturation Voltage (IC = 150 mAdc, IB = 15 mAdc) 2N2219 2N2219A/AL 2N2219 2N2219A/AL (IC = 500 mAdc, IB = 50 mAdc) hFE VCE(sat) VBE(sat) - Vdc Vdc SMALL-SIGNAL CHARACTERISTICS |hfe| Magnitude of Small-Signal Current Gain (IC = 20 mAdc, VCE = 20 Vdc, f = 100 MHz) Small-Signal Current Gain (IC = 1.0 mAdc, VCE = 10 Vdc, f = 1 kHz) 2N2219 2N2219A/AL hfe Output Capacitance (VCB = 10 Vdc, IE = 0, 100 kHz f 1.0 MHz) Cobo Input Capacitance (VEB = 0.5 Vdc, IC = 0, 100 kHz f 1.0 MHz) Cibo - - pF pF SWITCHING CHARACTERISTICS Turn-On Time (Reference Figure in MIL-PRF-19500/251) 2N2219 2N2219A/AL Turn-Off Time (Reference Figure in MIL-PRF-19500/251) 2N2219 2N2219A/AL 1. Pulse Test: Pulse Width = 300 ms, Duty Cycle 2.0%. http://onsemi.com 2 ton toff ns ns MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS TO-5 3-Lead CASE 205AA ISSUE B DATE 06 JUL 2012 SCALE 1:1 B A B DETAIL X U P C U L R F A SEATING PLANE K NOTE 5 E T NOTE 7 D 3X NOTES 4 & 6 0.007 (0.18MM) A B S C DETAIL X M N H 2 1 3 J M LEAD IDENTIFICATION DETAIL C NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: INCHES. 3. DIMENSION J MEASURED FROM DIAMETER A TO EDGE. 4. LEAD TRUE POSITION TO BE DETERMINED AT THE GUAGE PLANE DEFINED BY DIMENSION R. 5. DIMENSION F APPLIES BETWEEN DIMENSION P AND L. 6. DIMENSION D APPLIES BETWEEN DIMENSION L AND K. 7. BODY CONTOUR OPTIONAL WITHIN ZONE DEFINED BY DIMEN SIONS A, B, AND T. 8. DIMENSION B SHALL NOT VARY MORE THAN 0.010 IN ZONE P. DIM A B C D E F H J K L M N P R T U MILLIMETERS MIN MAX 8.89 9.40 8.00 8.51 6.10 6.60 0.41 0.53 0.23 3.18 0.41 0.48 0.71 0.86 0.73 1.02 38.10 44.45 6.35 --45_BSC 5.08 BSC --1.27 1.37 BSC --0.76 2.54 --- INCHES MIN MAX 0.350 0.370 0.315 0.335 0.240 0.260 0.016 0.021 0.009 0.125 0.016 0.019 0.028 0.034 0.029 0.040 1.500 1.750 0.250 --45 _BSC 0.200 BSC --0.050 0.054 BSC --0.030 0.100 --- STYLE 1: PIN 1. EMITTER 2. BASE 3. COLLECTOR DOCUMENT NUMBER: 98AON49138E Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed STATUS: ON SEMICONDUCTOR STANDARD versions are uncontrolled except when stamped "CONTROLLED COPY" in red. NEW STANDARD: (c) Semiconductor Components Industries, LLC, 2002 Case Outline Number: http://onsemi.com October, DESCRIPTION: 2002 - Rev. 0 PAGE 1 OFXXX 2 TO-5 3-LEAD 1 DOCUMENT NUMBER: 98AON49138E PAGE 2 OF 2 ISSUE REVISION DATE O RELEASED FOR PRODUCTION. REQ. BY B. JENSEN. 18 MAR 2010 A CHANGED DIMENSION "D" MAX TO 0.53 MM (0.021 IN). REQ. BY B. JENSEN. 10 AUG 2010 B MADE ISOMETRIC IMAGE LARGER TO REFLECT ACTUAL SIZE. REQ. BY J. FULTON. 06 JUL 2012 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. (c) Semiconductor Components Industries, LLC, 2012 July, 2012 - Rev. B Case Outline Number: 205AA MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS TO-39 3-Lead CASE 205AB ISSUE A DATE 25 JUN 2012 SCALE 1:1 B A B DETAIL X U P C L R F U A SEATING PLANE K NOTE 5 E T NOTE 7 D NOTES 4 & 6 0.007 (0.18MM) A B S C 3X DETAIL X M N H 2 1 3 J M LEAD IDENTIFICATION DETAIL C NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: INCHES. 3. DIMENSION J MEASURED FROM DIAMETER A TO EDGE. 4. LEAD TRUE POSITION TO BE DETERMINED AT THE GUAGE PLANE DEFINED BY DIMENSION R. 5. DIMENSION F APPLIES BETWEEN DIMENSION P AND L. 6. DIMENSION D APPLIES BETWEEN DIMENSION L AND K. 7. BODY CONTOUR OPTIONAL WITHIN ZONE DEFINED BY DIMEN SIONS A, B, AND T. 8. DIMENSION B SHALL NOT VARY MORE THAN 0.010 IN ZONE P. DIM A B C D E F H J K L M N P R T U MILLIMETERS MIN MAX 8.89 9.40 8.00 8.51 6.10 6.60 0.41 0.48 0.23 3.18 0.41 0.48 0.71 0.86 0.73 1.02 12.70 14.73 6.35 --45_BSC 5.08 BSC --1.27 1.37 BSC --0.76 2.54 --- INCHES MIN MAX 0.350 0.370 0.315 0.335 0.240 0.260 0.016 0.019 0.009 0.125 0.016 0.019 0.028 0.034 0.029 0.040 0.500 0.580 0.250 --45 _BSC 0.200 BSC --0.050 0.054 BSC --0.030 0.100 --- STYLE 1: PIN 1. EMITTER 2. BASE 3. COLLECTOR DOCUMENT NUMBER: STATUS: 98AON49134E ON SEMICONDUCTOR STANDARD NEW STANDARD: (c) Semiconductor Components Industries, LLC, 2002 October, DESCRIPTION: 2002 - Rev. 0 TO-39 3-LEAD http://onsemi.com 1 Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped "CONTROLLED COPY" in red. Case Outline Number: PAGE 1 OFXXX 2 DOCUMENT NUMBER: 98AON49134E PAGE 2 OF 2 ISSUE REVISION DATE O RELEASED FOR PRODUCTION. REQ. BY B. JENSEN. 18 MAR 2010 A MADE ISOMETRIC IMAGE LARGER TO REFLECT ACTUAL SIZE. REQ. BY J. FULTON. 25 JUN 2012 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. (c) Semiconductor Components Industries, LLC, 2012 June, 2012 - Rev. A Case Outline Number: 205AB ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800-282-9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 www.onsemi.com 1 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative