© Semiconductor Components Industries, LLC, 2012
August, 2012 − Rev. 1
1Publication Order Number:
2N2219/D
2N2219, 2N2219A,
2N2219AL
Small Signal Switching
Transistor
NPN Silicon
Features
•MIL−PRF−19500/251 Qualified
•Available as JAN, JANTX, and JANTXV
MAXIMUM RATINGS (TA = 25°C unless otherwise noted)
Characteristic Symbol Value Unit
Collector−Emitter Voltage VCEO 50 Vdc
Collector−Base Voltage VCBO 75 Vdc
Emitter−Base Voltage VEBO 6.0 Vdc
Collector Current − Continuous IC800 mAdc
Total Power Dissipation @ TA = 25°C PT0.8 W
Total Power Dissipation @ TC = 25°C PT3.0 W
Operating and Storage Junction
Temperature Range
TJ, Tstg −65 to
+200
°C
THERMAL CHARACTERISTICS
Characteristic Symbol Max Unit
Thermal Resistance, Junction to Case RqJC 50 °C/W
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
http://onsemi.com
COLLECTOR
3
2
BASE
1
EMITTER
Device Package Shipping
ORDERING INFORMATION
JAN2N2219/A
JANTX2N2219/A TO−39 Bulk
JANTXV2N2219/A
TO−5
CASE 205AA
(2N2219AL)
TO−39
CASE 205AB
(2N2219, 2N2219A)
JAN2N2219AL
JANTX2N2219AL TO−5 Bulk
JANTXV2N2219AL
2N2219, 2N2219A, 2N2219AL
http://onsemi.com
2
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
Characteristic Symbol Min Max Unit
OFF CHARACTERISTICS
Collector−Emitter Breakdown Voltage
(IE = 10 mAdc) 2N2219
2N2219A/AL
V(BR)CEO 30
50
−
−
Vdc
Emitter−Base Cutoff Current
(VEB = 5.0 Vdc) 2N2219
(VEB = 6.0 Vdc) 2N2219A/AL
(VEB = 4.0 Vdc) All
IEBO −
−
−
10
10
10
mAdc
mAdc
nAdc
Collector−Emitter Cutoff Current
(VCE = 30 Vdc) 2N2219
(VCE = 50 Vdc) 2N2219A/AL
ICES −
−
10
10
nAdc
nAdc
Collector−Base Cutoff Current
(VCB = 50 Vdc) 2N2219
(VCB = 60 Vdc) 2N2219
(VCB = 60 Vdc) 2N2219A/AL
(VCB = 75 Vdc) 2N2219A/AL
ICBO −
−
−
−
10
10
10
10
nAdc
mAdc
nAdc
mAdc
ON CHARACTERISTICS (Note 1)
DC Current Gain
(IC = 0.1 mAdc, VCE = 10 Vdc) 2N2219
2N2219A/AL
(IC = 1.0 mAdc, VCE = 10 Vdc) 2N2219
2N2219A/AL
(IC = 10 mAdc, VCE = 10 Vdc) 2N2219
2N2219A/AL
(IC = 150 mAdc, VCE = 10 Vdc) 2N2219/A/AL
(IC = 500 mAdc, VCE = 10 Vdc) 2N2219/A/AL
hFE 35
50
50
75
75
100
100
30
−
−
325
325
−
−
300
−
−
Collector−Emitter Saturation Voltage
(IC = 150 mAdc, IB = 15 mAdc) 2N2219
2N2219A/AL
(IC = 500 mAdc, IB = 50 mAdc) 2N2219
2N2219A/AL
VCE(sat) −
−
−
−
0.4
0.3
1.6
1.0
Vdc
Base−Emitter Saturation Voltage
(IC = 150 mAdc, IB = 15 mAdc) 2N2219
2N2219A/AL
(IC = 500 mAdc, IB = 50 mAdc) 2N2219
2N2219A/AL
VBE(sat) 0.6
0.6
−
−
1.3
1.2
2.6
2.0
Vdc
SMALL−SIGNAL CHARACTERISTICS
Magnitude of Small−Signal Current Gain
(IC = 20 mAdc, VCE = 20 Vdc, f = 100 MHz)
|hfe|
2.5 12
−
Small−Signal Current Gain
(IC = 1.0 mAdc, VCE = 10 Vdc, f = 1 kHz) 2N2219
2N2219A/AL
hfe 50
75
−
−
−
Output Capacitance
(VCB = 10 Vdc, IE = 0, 100 kHz ≤ f ≤ 1.0 MHz)
Cobo −8.0
pF
Input Capacitance
(VEB = 0.5 Vdc, IC = 0, 100 kHz ≤ f ≤ 1.0 MHz)
Cibo −25
pF
SWITCHING CHARACTERISTICS
Turn−On Time
(Reference Figure in MIL−PRF−19500/251) 2N2219
2N2219A/AL
ton −
−
40
35
ns
Turn−Off Time
(Reference Figure in MIL−PRF−19500/251) 2N2219
2N2219A/AL
toff −
−
250
300
ns
1. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%.
TO−5 3−Lead
CASE 205AA
ISSUE B
DATE 06 JUL 2012
SCALE 1:1
STYLE 1:
PIN 1. EMITTER
2. BASE
3. COLLECTOR
SEATING
PLANE
RF
B
C
K
L
P
D3X
M
H
J
S
B0.007 (0.18MM) C M
A
N
DIM MIN MAX MIN MAX
INCHESMILLIMETERS
A0.350 0.3708.89 9.40
B0.315 0.3358.00 8.51
C0.240 0.2606.10 6.60
D0.016 0.0210.41 0.53
E0.009 0.1250.23 3.18
F0.016 0.0190.41 0.48
N0.200 BSC5.08 BSC
H0.028 0.0340.71 0.86
J0.029 0.0400.73 1.02
K1.500 1.75038.10 44.45
L0.250 ---6.35 ---
M45 BSC45 BSC
R0.054 BSC1.37 BSC
P--- 0.050--- 1.27
__
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: INCHES.
3. DIMENSION J MEASURED FROM DIAMETER A TO EDGE.
4. LEAD TRUE POSITION TO BE DETERMINED AT THE GUAGE
PLANE DEFINED BY DIMENSION R.
5. DIMENSION F APPLIES BETWEEN DIMENSION P AND L.
6. DIMENSION D APPLIES BETWEEN DIMENSION L AND K.
7. BODY CONTOUR OPTIONAL WITHIN ZONE DEFINED BY DIMEN
SIONS A, B, AND T.
8. DIMENSION B SHALL NOT VARY MORE THAN 0.010 IN ZONE P.
T--- 0.030--- 0.76
U0.100 ---2.54 ---
A
B
A
DETAIL X
U
NOTE 5
NOTES 4 & 6
C
U
E
2
31
DETAIL X
NOTE 7
T
LEAD IDENTIFICATION
DETAIL
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
http://onsemi.com
1
© Semiconductor Components Industries, LLC, 2002
October, 2002 − Rev. 0
Case Outline Number:
XXX
DOCUMENT NUMBER:
STATUS:
NEW STANDARD:
DESCRIPTION:
98AON49138E
ON SEMICONDUCTOR STANDARD
TO−5 3−LEAD
Electronic versions are uncontrolled except when
accessed directly from the Document Repository. Printed
versions are uncontrolled except when stamped
“CONTROLLED COPY” in red.
PAGE 1 OF 2
DOCUMENT NUMBER:
98AON49138E
PAGE 2 OF 2
ISSUE REVISION DATE
ORELEASED FOR PRODUCTION. REQ. BY B. JENSEN. 18 MAR 2010
ACHANGED DIMENSION “D” MAX TO 0.53 MM (0.021 IN). REQ. BY B. JENSEN. 10 AUG 2010
BMADE ISOMETRIC IMAGE LARGER TO REFLECT ACTUAL SIZE. REQ. BY J.
FULTON.
06 JUL 2012
© Semiconductor Components Industries, LLC, 2012
July, 2012 − Rev. B
Case Outline Number:
205AA
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
TO−39 3−Lead
CASE 205AB
ISSUE A
DATE 25 JUN 2012
SCALE 1:1
STYLE 1:
PIN 1. EMITTER
2. BASE
3. COLLECTOR
SEATING
PLANE
RF
B
C
K
L
P
D
3X
M
H
J
S
B0.007 (0.18MM) C M
A
N
DIM MIN MAX MIN MAX
INCHESMILLIMETERS
A0.350 0.3708.89 9.40
B0.315 0.3358.00 8.51
C0.240 0.2606.10 6.60
D0.016 0.0190.41 0.48
E0.009 0.1250.23 3.18
F0.016 0.0190.41 0.48
N0.200 BSC5.08 BSC
H0.028 0.0340.71 0.86
J0.029 0.0400.73 1.02
K0.500 0.58012.70 14.73
L0.250 ---6.35 ---
M45 BSC45 BSC
R0.054 BSC1.37 BSC
P--- 0.050--- 1.27
__
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: INCHES.
3. DIMENSION J MEASURED FROM DIAMETER A TO EDGE.
4. LEAD TRUE POSITION TO BE DETERMINED AT THE GUAGE
PLANE DEFINED BY DIMENSION R.
5. DIMENSION F APPLIES BETWEEN DIMENSION P AND L.
6. DIMENSION D APPLIES BETWEEN DIMENSION L AND K.
7. BODY CONTOUR OPTIONAL WITHIN ZONE DEFINED BY DIMEN
SIONS A, B, AND T.
8. DIMENSION B SHALL NOT VARY MORE THAN 0.010 IN ZONE P.
T--- 0.030--- 0.76
U0.100 ---2.54 ---
A
B
A
DETAIL X
U
NOTE 5
NOTES 4 & 6
C
U
E
2
31
DETAIL X
NOTE 7
T
LEAD IDENTIFICATION
DETAIL
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
http://onsemi.com
1
© Semiconductor Components Industries, LLC, 2002
October, 2002 − Rev. 0
Case Outline Number:
XXX
DOCUMENT NUMBER:
STATUS:
NEW STANDARD:
DESCRIPTION:
98AON49134E
ON SEMICONDUCTOR STANDARD
TO−39 3−LEAD
Electronic versions are uncontrolled except when
accessed directly from the Document Repository. Printed
versions are uncontrolled except when stamped
“CONTROLLED COPY” in red.
PAGE 1 OF 2
DOCUMENT NUMBER:
98AON49134E
PAGE 2 OF 2
ISSUE REVISION DATE
ORELEASED FOR PRODUCTION. REQ. BY B. JENSEN. 18 MAR 2010
AMADE ISOMETRIC IMAGE LARGER TO REFLECT ACTUAL SIZE. REQ. BY J.
FULTON.
25 JUN 2012
© Semiconductor Components Industries, LLC, 2012
June, 2012 − Rev. A
Case Outline Number:
205AB
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
www.onsemi.com
1
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative
◊
