HMC576LC3B v02.0514 MULTIPLIERS - ACTIVE - SMT SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 18 - 29 GHz OUTPUT Typical Applications Features The HMC576LC3B is suitable for: High Output Power: +15 dBm * Clock Generation Applications: SONET OC-192 & SDH STM-64 Low Input Power Drive: 0 to +6 dBm * Point-to-Point & VSAT Radios Fo Isolation: >20 dBc @ Fout= 24 GHz 100 KHz SSB Phase Noise: -132 dBc/Hz * Test Instrumentation Single Supply: +5V@ 82 mA * Military & Space RoHS Compliant 3x3 mm SMT Package Functional Diagram General Description The HMC576LC3B is a x2 active broadband frequency multiplier utilizing GaAs PHEMT technology in a leadless RoHS compliant SMT package. When driven by a +3 dBm signal, the multiplier provides +15 dBm typical output power from 18 to 29 GHz. The Fo and 3Fo isolations are >20 dBc at 24 GHz. The HMC576LC3B is ideal for use in LO multiplier chains for Pt-to-Pt & VSAT Radios yielding reduced parts count vs. traditional approaches. The low additive SSB Phase Noise of -132 dBc/Hz at 100 kHz offset helps maintain good system noise performance. The RoHS packaged HMC576LC3B eliminates the need for wire bonding, and allows the use of surface mount manufacturing techniques. Electrical Specifications, TA = +25 C, Vdd1, Vdd2 = +5V, 3 dBm Drive Level Parameter Min. Frequency Range, Input Frequency Range, Output Max. Units GHz 18 - 29 GHz 15 dBm Fo Isolation (with respect to output level) 20 dBc 3Fo Isolation (with respect to output level) 20 dBc Input Return Loss 10 dB Output Return Loss 10 dB -132 dBc/Hz 82 mA Output Power SSB Phase Noise (100 kHz Offset) Supply Current (Idd1 & Idd2) 1 Typ. 9 - 14.5 10 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC576LC3B v02.0514 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 18 - 29 GHz OUTPUT 20 25 18 20 16 15 14 12 10 8 +25C +85C -40C 6 4 10 5 0 -5 -10 -15 -6 dBm -4 dBm -2 dBm 0 dBm -20 2 -25 0 2 dBm 4 dBm 6 dBm -30 17 18 19 20 21 22 23 24 25 26 27 28 29 30 17 18 19 20 21 22 23 FREQUENCY (GHz) 24 25 26 27 28 29 30 28 29 30 FREQUENCY (GHz) Output Power vs. Supply Voltage @ 3 dBm Drive Level Isolation @ 3 dBm Drive Level 20 20 16 OUTPUT POWER (dBm) OUTPUT POWER (dBm) 18 14 12 10 8 4.5V 5.0V 5.5V 6 4 10 0 -10 Fo 2Fo 3Fo -20 2 0 MULTIPLIERS - ACTIVE - SMT Output Power vs. Drive Level OUTPUT POWER (dBm) OUTPUT POWER (dBm) Output Power vs. Temperature @ 3 dBm Drive Level -30 17 18 19 20 21 22 23 24 25 26 27 28 29 17 30 18 19 20 21 22 23 FREQUENCY (GHz) 24 25 26 27 FREQUENCY (GHz) Output Power vs. Input Power 20 OUTPUT POWER (dBm) 15 10 5 0 -5 18GHz 24GHz 29GHz -10 -15 -20 -10 -8 -6 -4 -2 0 2 4 6 8 10 INPUT POWER (dBm) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 2 HMC576LC3B v02.0514 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 18 - 29 GHz OUTPUT Input Return Loss vs. Temperature Output Return Loss vs. Temperature 0 3 OUTPUT RETURN LOSS (dB) INPUT RETURN LOSS (dB) MULTIPLIERS - ACTIVE - SMT 0 -5 -10 -15 -20 +25C +85C -40C -25 -30 +25C +85C -40C -5 -10 -15 -20 -25 8 9 10 11 12 FREQUENCY (GHz) 13 14 15 17 18 19 20 21 22 23 24 25 26 27 28 29 30 FREQUENCY (GHz) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC576LC3B v02.0514 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 18 - 29 GHz OUTPUT Typical Supply Current vs. Vdd RF Input (Vdd = +5V) +13 dBm Vdd (Vdc) Idd (mA) Supply Voltage (Vdd) +6.0 Vdc 4.5 82 Channel Temperature 175 C Continuous Pdiss (T= 85 C) (derate 7.5 mW/C above 85 C) 676 mW Thermal Resistance (channel to ground paddle) 133 C/W Storage Temperature -65 to +150 C Operating Temperature -40 to +85 C 5.0 82 5.5 83 Note: Multiplier will operate over full voltage range shown above. ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing MULTIPLIERS - ACTIVE - SMT Absolute Maximum Ratings NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA 2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKEL. 3. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish HMC576LC3B Alumina, White Gold over Nickel MSL Rating MSL3 [1] Package Marking [2] H576 XXXX [1] Max peak reflow temperature of 260 C [2] 4-Digit lot number XXXX Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 4 HMC576LC3B v02.0514 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 18 - 29 GHz OUTPUT MULTIPLIERS - ACTIVE - SMT Pin Description 5 Pin Number Function Description 1, 3, 7, 9 GND Package bottom must also be connected to RF/DC ground. 2 RFIN Pin is AC coupled and matched to 50 Ohms. 4 - 6, 11 N/C These pins are internally not connected; however, this product was specified with these pins connected to RF/ DC ground. 8 RFOUT Pin is AC coupled and matched to 50 Ohms. 10, 12 Vdd2, Vdd1 Supply voltage 5V 0.5V. External bypass capacitors of 100 pF, 1,000 pF and 2.2 F are required. Interface Schematic Application Circuit Component Value C1, C2 100 pF C3, C4 1,000 pF C5, C6 2.2 F Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC576LC3B v02.0514 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 18 - 29 GHz OUTPUT MULTIPLIERS - ACTIVE - SMT Evaluation PCB List of Materials for Evaluation PCB 112409 [1] Item Description J1, J2 PCB Mount SRI K Connector J3 - J5 DC Pin C1, C2 100 pF Capacitor, 0402 Pkg. C3, C4 1,000 pF Capacitor, 0603 Pkg. C5, C6 2.2 F Tantalum Capacitor U1 HMC576LC3B x2 Active Multiplier PCB [2] 111173 Eval Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 6 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Analog Devices Inc.: HMC576LC3B HMC576LC3BTR