PTZ5.1B Diodes Zener diode PTZ5.1B zApplications zDimensions (Unit : mm) zLand size figure (Unit : mm) Voltage regulation zFeatures 1) Small power mold type. (PMDS) 2) High ESD tolerance zConstruction Silicon epitaxial planar zStructure zTaping dimensions (Unit : mm) zAbsolute maximum ratings (Ta=25qC) Param eter Power dis s ipation Junction tem perature Storage tem perature Sym bol Lim its Unit P Tj 1000 mW 150 -55 to +150 Ts tg Rev.F 1/4 PTZ5.1B Diodes zElectrical characteristics (Ta=25qC) Symbol TYP. Operating resistance Zz() Zener voltageVz(V) Reverse current IR(A) Temperature coeficiency *z(mV/) MIN. TYP. MAX. Iz(mA) Max. Iz(mA) MAX. VR(V) TYP. Iz(mA) PTZ 3.6B 3.600 3.813 4.000 40 15 40 60 40 1.0 -2.8 PTZ 3.9B 3.900 4.136 4.400 40 15 40 40 40 1.0 -2.4 PTZ 4.3B 4.300 40 40 40 4.572 4.800 15 20 1.0 -2.1 PTZ 4.7B 4.700 40 40 40 4.924 5.200 10 20 1.0 -1.7 PTZ 5.1B 5.100 40 40 40 5.368 5.700 8 20 1.0 -0.6 PTZ 5.6B 5.600 40 40 40 5.856 6.300 8 20 1.5 1.4 PTZ 6.2B 6.200 40 40 40 6.509 7.000 6 20 3.0 2.5 PTZ 6.8B 6.800 40 40 40 7.280 7.700 6 20 3.5 3.2 PTZ 7.5B 7.500 40 40 40 7.889 8.400 4 20 4.0 4.2 PTZ 8.2B 8.200 40 40 40 8.655 9.300 4 20 5.0 5.0 PTZ 9.1B 9.100 40 40 40 9.747 10.200 6 20 6.0 5.9 PTZ 10B 10.000 40 40 40 10.310 11.200 6 10 7.0 6.9 PTZ 11B 11.000 20 20 20 11.510 12.300 8 10 8.0 7.9 PTZ 12B 12.000 20 20 20 12.500 13.500 8 10 9.0 8.7 PTZ 13B 13.300 20 20 20 13.820 15.000 10 10 10.0 10.1 20 20 PTZ 15B 14.700 20 10 11.0 11.8 15.350 16.500 10 PTZ 16B 16.200 20 20 20 16.860 18.300 12 10 12.0 13.3 PTZ 18B 18.000 20 20 20 19.000 20.300 12 10 13.0 15.0 PTZ 20B 20.000 20.820 20 14 20 15.0 17.4 20 22.400 10 PTZ 22B 22.000 23.850 10 10 17.0 19.4 10 24.500 10 PTZ 24B 24.000 10 10 25.310 27.600 10 10 19.0 21.6 PTZ 27B 27.000 10 10 28.700 30.800 10 10 21.0 24.6 PTZ 30B 30.000 10 10 31.570 34.000 10 10 23.0 27.5 PTZ 33B 33.000 10 10 34.950 37.000 10 10 25.0 30.8 39.240 40.000 10 10 27.0 37.0 PTZ 36B 36.000 10 10 ()The zener voltage(Vz) is measured 40ms after power is supplied. ()The operating resistances(Zz,Zzk) are measured by superimposing a minute alternating current on the regulated current(Iz) ESD breakdown voltage ESD(kV) MIN. Test Condition 30kV C=150pF R=330 forward and reverse: 10 times zMarking (TYPE NO.) TYPE PTZ3.6B PTZ3.9B PTZ4.3B PTZ4.7B PTZ5.1B PTZ5.6B PTZ6.2B PTZ6.8B PTZ7.5B TYPENO. 3.6B 3.9B 4.3B 4.7B 5.1B 5.6B 6.2B 6.8B 7.5B TYPE PTZ8.2B PTZ9.1B PTZ10B PTZ11B PTZ12B PTZ13B PTZ15B PTZ16B PTZ18B TYPENO. 8.2B 9.1B 10B 11B 12B 13B 15B 16B 18B TYPE PTZ20B PTZ22B PTZ24B PTZ27B PTZ30B PTZ33B PTZ36B 20B 22B 24B 27B 30B 33B 36B Rev.F 2/4 PTZ5.1B Diodes zElectrical characteristic curves (Ta=25qC) Mounted on epoxy board Rev.F 3/4 PTZ5.1B Diodes No break at 30kV Rev.F 4/4 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright (c) 2007 ROHM CO.,LTD. THE AMERICAS / EUPOPE / ASIA / JAPAN Contact us : webmaster@ rohm.co. jp 21, Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix1-Rev2.0