Datasheet Rev. JA1
Issued 2010/01
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical para -
me ters, test conditions and
processing information only
to be used together with the
'Definitions' section in the
cat -
alogue or at schrackrelays.com
in the ‘Schrack’ section.
Specifications subject to
change.
General Purpose Relays
1
SCHRACK
Miniature Power PCB RY II & RY II reflow solderable
n1 pole 8 A, 1 CO or 1 NO or 1 NC contact
nLow component height 12.3 mm
n5 kV / 8 mm coil-contact
nReinforced insulation (protection class II)
nPinnings: 3.2 and 5 mm
nReflow-solderable version
nSockets with PCB-type terminals
nEspecially suitable for resistive and inductive loads on NO and NC contacts
nPlastic materials according to IEC60335-1 (domestic appliances,
not in reflow-solderable version)
Applications: heating control, interface technology, domestic appliances, timers,
temperature control
Approvals
VREG.-Nr. 5358, ZE214025
Technical data of approved types on request
Contact data
Contact configuration 1 CO or 1NO or 1NC
Contact set single contact
Type of interruption micro disconnection
Rated voltage / max. switching voltage AC 250 / 400 VAC
Rated current 8 A
Maximum breaking capacity AC 2000 VA
Contact material AgNi0.15, AgSnO2
Rated frequency of operation with / without load 6 / 1200 min-1
Operate- / release time max. 9 / 5 ms
Bounce time NO / NC contact max. 6 / 10 ms
Contact ratings
Type Contact Load Ambient Cycles
temp. [°C]
IEC 61810
RY531 NO 8 A, 250 VAC 70°C 100x103
RY211 NO 8 A, 250 VAC 70°C 75x103
RY211 NC 8 A, 250 VAC 70°C 50x103
UL 508
RY211 NO / NC 10 A, 250 VAC, general purpose 70°C 30x103
RY211 NO 1/2 hp, 240 VAC 85°C 30x103
RY211 NO / NC B300 70°C 6x103
EN60730-1
RY211 NO / NC 6(4)A, 250 VAC 85°C 100x103
RY211 NO 8(4)A, 250 VAC 75°C 100x103
Coil data
Rated coil voltage range DC coil 5...60 VDC
Operative range to IEC 61810 2
Coil versions, DC-coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ohm mW
005 5 3.5 0.5 112+10% 223
006 6 4.2 0.6 162+10% 222
009 9 6.3 0.9 320+10% 253
012 12 8.4 1.2 627+10% 230
024 24 16.8 2.4 2350+10% 245
048 48 33.6 4.8 9391+10% 245
060 60 42.0 6.0 14000+10% 257
All figures are given for coil without preenergization, at ambient temperature +23°C
Other coil voltages on request
F0142-E
Datasheet Rev. JA1
Issued 2010/01
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical para -
me ters, test conditions and
processing information only
to be used together with the
'Definitions' section in the
cat -
alogue or at schrackrelays.com
in the ‘Schrack’ section.
Specifications subject to
change.
General Purpose Relays SCHRACK
2
Miniature Power PCB RY II & RY II reflow solderable (Continued)
Insulation CO contact NO contact
Dielectric strength coil-contact circuit 5000 Veff
open contact circuit 1000 Veff
Clearance / creepage coil-contact circuit W8 / 8 mm
Material group of insulation parts IIIa
Tracking index of relay base PTI250, PTI 175*
Insulation to IEC 61810-1
Type of insulation coil-contact circuit reinforced
open contact circuit micro disconnection
Rated insulation voltage 250 V 250 V
Pollution degree 3 2 3
Rated voltage system 230 V 230 / 400 V 230 / 400
V
Overvoltage category III III
Other data
Mechanical endurance 30x106cycles
Material
RoHS - Directive 2002/95/EC compliant as per product date code 0403
Resistance to heat and fire according EN60335, par.30**
Environment
Ambient temperature range -40...+70°C
Ambient temperature max. 85°C at 6A
Vibration resistance (function) NO / NC contact 20 / 5 g
Shock resistance (function) NO / NC contact 20 / 5 g
Shock resistance (destruction) 100 g
Category of protection RTII - flux proof, RTIII - wash tight**
Processing
Mounting pcb
Mounting position any
Minimum mounting distance W 0 mm
Soldering heat resistance flux proof version 270°C / 10 s
wash tight version 260°C / 5 s
Relay weight 8 g
Packaging unit, standard version 20 / 500 pcs
reflow version 1120 pcs
Accessoires
For technical details see datasheet Accessoires RYII
* reflow-solderable version
** not as reflow-solderable version
PCB layout / terminal assignment
Bottom view on solder pins
1 CO contact, 3.2 mm
1 NO, 1 NC contact 5 mm
S0254-AA
S0254-AB
S0254-AC
S0254-AD
S0254-AF
S0254-AE
S0274-CA
S0274-CB
Dimensions
Pinning 3.2 mm
Pinning 5 mm
Datasheet Rev. JA1
Issued 2010/01
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical para -
me ters, test conditions and
processing information only
to be used together with the
'Definitions' section in the
cat -
alogue or at schrackrelays.com
in the ‘Schrack’ section.
Specifications subject to
change.
General Purpose Relays
3
SCHRACK
Miniature Power PCB RY II & RY II reflow solderable (Continued)
Product key Typical product key RY611012
Type
RY Miniature Power PCB Relay RY II & RY II reflow-solderable
Version
2pinning 3.2 mm, flux proof 6pinning 3.2 mm, wash tight **)
5pinning 5 mm, flux proof Apinning 5 mm, wash tight **)
Contact configuration
1
1 CO contact (1 form C), pinning 3.2 mm
3
1 NO contact (1 form A), pinning 5 mm
5
1 NC contact (1 form B), pinning 5 mm
Contact material
1AgNi 0.15 2AgNi 0.15 gold plated
3AgSnO2
Coil
Coil code: please refer to coil versions table
Version
Blank standard version
Rreflow-solderable
**) not as reflow-solderable version
Other types on request
Soldering profile for reflow-solderable version
Datasheet Rev. JA1
Issued 2010/01
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical para -
me ters, test conditions and
processing information only
to be used together with the
'Definitions' section in the
cat -
alogue or at schrackrelays.com
in the ‘Schrack’ section.
Specifications subject to
change.
General Purpose Relays SCHRACK
4
Miniature Power PCB RY II & RY II reflow solderable (Continued)
Product key Version Contacts Contact material Coil Part number
RY211005 pinning 3.2 mm 1 CO contact AgNi 0.15 5 VDC 4-1393224-2
RY211012 flux proof 12 VDC 4-1393224-6
RY211024 24 VDC 4-1393224-9
RY211048 48 VDC 5-1393224-1
RY212005 AgNi 0.15 5 VDC 5-1393224-2
RY212012 gold plated 12 VDC 5-1393224-5
RY212024 24 VDC 5-1393224-8
RY212048 48 VDC 5-1393224-9
RY213005 AgSnO25 VDC 6-1393224-0
RY213012 12 VDC 6-1393224-1
RY213024 24 VDC 6-1393224-2
RY213048 48 VDC 6-1393224-3
RY531005 pinning 5 mm 1 NO contact AgNi 0.15 5 VDC 7-1393224-6
RY531012 flux proof 12 VDC 7-1393224-9
RY531024 24 VDC 8-1393224-2
RY531048 48 VDC 8-1393224-3
RY532012 AgNi 0.15 12 VDC 8-1393224-4
RY532024 gold plated 24 VDC 8-1393224-5
RY533012 AgSnO212 VDC 8-1393224-8
RY533024 24 VDC 8-1393224-9
RY533048 48 VDC 9-1393224-0
RY611005 pinning 3.2 mm 1 CO contact AgNi 0.15 5 VDC 1-1393225-7
RY611012 wash tight 12 VDC 1-1393225-9
RY611024 24 VDC 2-1393225-1
RY611048 48 VDC 2-1393225-2
RY612005 AgNi 0.15 5 VDC 2-1393225-3
RY612012 gold plated 12 VDC 2-1393225-6
RY612024 24 VDC 2-1393225-9
RY612048 48 VDC 3-1393225-0
RY613005 AgSnO25 VDC 5-1419136-2
RY613012 12 VDC 3-1393225-1
RY613024 24 VDC 3-1393225-3
RY613048 48 VDC 3-1393225-4
RYA31005 pinning 5 mm 1 NO contact AgNi 0.15 5 VDC 1393224-7
RYA31012 wash tight 12 VDC 1393224-9
RYA31024 24 VDC 1-1393224-2
RYA31048 48 VDC 1-1393224-3
RYA32005 AgNi 0.15 5 VDC 1-1393224-4
RYA32012 gold plated 12 VDC 1-1393224-6
RYA32024 24 VDC 1-1393224-8
RYA33005 AgSnO25 VDC 1-1393224-9
RYA33024 24 VDC 2-1393224-1
