IWPTL Series Low Range Industrial Wireless Pressure Transducer Suitable for liquids and gases Pressure ranges from 0-50mbar to 0-1000mbar gauge Up to 750m line-of-site range (depending on receiver) Piezo-resistive stainless steel sensor with stainless steel body Five year battery life at 10 second transmission update rate Simple DIL switch pairing with the single or five channel receiver Single or five channel receivers available User-selectable transmission update rates User-selectable 1-5V or 4-20mA receiver outputs Receiver clean contacts provide process alarm functions DESCRIPTION The IWPTL Wireless Pressure Transducer is a cost effective replacement to a traditionally wired pressure transducer that offers the advantages of a low-cost installation in inaccessible and expensive installation environments. It is easily paired to the compatible IWR family of single- or five-channel wireless receivers thus offering a "plug and play" solution to your pressure measurement applications. TYPICAL APPLICATIONS INCLUDE:- Simple cable replacement installation - dispense with expensive cable runs - Environmental monitoring - rainwater harvesting, environmental engineering - Facilities management - boiler rooms, laboratory testing, tank gauging - Asset monitoring - tank farms, process plants, HVAC and building management - Service Contract - temporary installation for servicing and field trials Pressure Ranges and Passive mV/V Outputs Nominal Pressure, Gauge, mbar 50 Nominal Pressure, Absolute mbar Permissible Overpressure mbar 2 bar Transmitter Output Transmission Frequency* Transmit Power System Channel Antenna *Compliant with EN 300 328, V1.8.1 Cynergy3 Components Ltd. Ferndown Industrial Estate 7 Cobham Road Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 Email:sales@cynergy3.com The instrument uses a piezo-resistive silicon sensor mounted within a 316 stainless steel housing giving excellent media compatibility for the harshest of applications. A swivel adaptor is available which allows the head to be easily aligned to the IWR receiver - see IWPT-SA The IWPT sensor should be used with either an IWR-1 or IWR-5 receiver. A line-of-sight range of up to 750m is possible depending on the wireless receiver used (refer to datasheets IWR-1 & IWR-5 for further information). Each device is temperature compensated, calibrated and supplied with a traceable serial number. 100 250 2 bar 2 bar 2.4 Ghz 18 dBm User selectable via DIL switch Integral 0dBi 750 750 5 bar System Performance Accuracy (Non-Linearity & Hysteresis) Setting Errors (offsets) Instrument Power Source Battery Type Battery Life Battery Shelf Life 1000 1000 5 bar <0.25% / FS (BFSL) Zero & Full Scale, <0.5% / FS User replaceable Lithium C cell Five years at 10 second update rate 10 years www.cynergy3.com ISO9001 C E R T I F I E D IWPTL 2018 500 500 5 bar Made in the UK (c) 2018 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited. IWPTL Series Low Range Industrial Wireless Pressure Transducer Material Specifications Pressure Housing "O" ring seals Diaphragm Wireless Enclosure Material Weight **Installation position Environmental protection 316 Stainless Steel Viton 316 stainless steel Plastic 310g including battery Any Designed to Ip68 (not recommended for submersion due to signal loss) ** Consult installation manual to ensure adequate signal path between transmitter and receiver Receiver Output Signals (requires either IWR-1 or IWR-5 receiver) Outputs 1-5V or 4-20mA per channel Single Channel Receiver IWR-1 (see data sheet) Five Channel receiver IWR-5 (see data sheet) Alarm Output 5 Amp rated changeover contacts Transmission Update Rate*** 1, 5, 10, and 30 seconds *** Consult installation manual for set-up: - single channel system is DIL switch configurable - five channel system requires set-up using "IWR Set" user software* Part Number IWPTL-G0050-00 IWPTL-G0100-00 IWPTL-G0250-00 IWPTL-G0500-00 IWPTL-G0750-00 IWPTL-G1000-00 IWPTL-A0500-00 IWPTL-A0750-00 IWPTL-A1000-00 Temperatures & Thermal Effects Media Temperature Ambient Temperature Storage Temperature Thermal Zero Shift Thermal Span Shift -20C to +135C -20C to +80C -20C to +80C <0.04% /FS/C <0.02% /C typical Mechanical Stability See user manual Ordering Codes:Pressure Transducer Spare battery Single Channel Receiver Five Channel Receiver Five Channel Configuration Software* Swivel Adaptor See table below IBAT-1 IWR-1 IWR-5 IWR-Set IWPT-SA *Download user configuration software here:https://www.cynergy3.com/sites/default/files/IWR-Set_v2.1_installer_0.exe Pressure Rating 0 - 50mbar G 0 - 100mbar G 0 - 250mbar G 0 - 500mbar G 0 - 750mbar G 0 - 1000mbar G 0 - 500mbar Abs 0 - 750mbar Abs 0 - 1000mbar Abs Receiver Output 1-5Vdc or 4-20mA 1-5Vdc or 4-20mA 1-5Vdc or 4-20mA 1-5Vdc or 4-20mA 1-5Vdc or 4-20mA 1-5Vdc or 4-20mA 1-5Vdc or 4-20mA 1-5Vdc or 4-20mA 1-5Vdc or 4-20mA Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 Email:sales@cynergy3.com 60 nominal Mechanical Dimensions ISO9001 C E R T I F I E D Made in the UK (c)2018 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.