www.cynergy3.com
© 2018 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.
ISO
9001
CERTIFIED
IWPTL Series
Low Range Industrial Wireless Pressure Transducer
Cynergy3 Components Ltd.
7 Cobham Road
Ferndown Industrial Estate
Wimborne, Dorset 21 7BH PE
IWPTL 2018
Telephone +44 (0) 1202 897969
Email:sales@cynergy3.com
DESCRIPTION
The IWPTL Wireless Pressure Transducer is a cost effective replacement to a traditionally
wired pressure transducer that offers the advantages of a low-cost installation in
inaccessible and expensive installation environments.
It is easily paired to the compatible IWR family of single- or five-channel wireless
receivers thus offering a “plug and play” solution to your pressure measurement
applications.
The instrument uses a piezo-resistive silicon sensor mounted within a 316 stainless
steel housing giving excellent media compatibility for the harshest of applications. A
swivel adaptor is available which allows the head to be easily aligned to the IWR receiver
- see IWPT-SA
The IWPT sensor should be used with either an IWR-1 or IWR-5 receiver. A line-of-sight
range of up to 750m is possible depending on the wireless receiver used (refer to
datasheets IWR-1 & IWR-5 for further information).
Each device is temperature compensated, calibrated and supplied with a traceable
serial number.
Single or five channel receivers available
User-selectable transmission update rates
User-selectable 1-5V or 4-20mA receiver outputs
Receiver clean contacts provide process alarm functions
Simple DIL switch pairing with the single or five channel receiver
Five year battery life at 10 second transmission update rate
Pressure ranges from 0-50mbar to 0-1000mbar gauge
Piezo-resistive stainless steel sensor with stainless steel body
TYPICAL APPLICATIONS INCLUDE:-
-–Simple cable replacement installation
dispense with expensive cable runs
- – rainwaterEnvironmental monitoring
harvesting, environmental engineering
- – boiler rooms,Facilities management
laboratory testing, tank gauging
- – tank farms, processAsset monitoring
plants, HVAC and building management
- – temporary installation forService Contract
servicing and field trials
Transmitter Output
Transmission Frequency* 2.4 Ghz
Transmit Power 18 dBm
System Channel User selectable via DIL switch
Antenna Integral 0dBi
*Compliant with EN 300 328, V1.8.1
System Performance
Accuracy (Non-Linearity <±0. % / ( )& Hysteresis) 25 FS BFSL
Setting Errors (offsets) Zero & Full Scale, <±0.5% / FS
Instrument Power Source
Battery Type User replaceable Lithium C cell
Battery Life Five years at 10 second update
rate
Battery Shelf Life 10 years
Up to 750m line-of-site range (depending on receiver)
Pressure Ranges and Passive mV/V Outputs
Nominal Pressure, Gauge, mbar 50 100 250 500 750 1000
Nominal Pressure, Absolute mbar 500 750 1000
Permissible Overpressure mbar 2 bar 2 bar 2 bar 5 bar 5 bar 5 bar
Made in the UK
Suitable for liquids and gases
ISO
9001
CERTIFIED
Cynergy3 Components Ltd.
7 Cobham Road
Ferndown Industrial Estate
Wimborne, Dorset 21 7BH PE
Telephone +44 (0) 1202 897969
Email:sales@cynergy3.com
©2018 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.
Material Specifications
Pressure 316Housing Stainless Steel
“O” ring seals Viton
Diaphragm 316 stainless steel
Wireless Enclosure Material Plastic
Weight g310 including battery
**Installation position Any
Environmental protection Designed to Ip68 (not recommended for
submersion due to signal loss)
** Consult installation manual to ensure adequate signal path between transmitter and receiver
Receiver Output Signals (requires either IWR-1 or IWR-5 receiver)
Outputs 1-5V or 4-20mA per channel
Single Channel Receiver IWR-1 (see data sheet)
Five Channel receiver IWR-5 (see data sheet)
Alarm Output 5 Amp rated changeover contacts
Transmission Update Rate*** 1, 5, 10, and 30 seconds
*** Consult installation manual for set-up:
- single channel system is DIL switch configurable
- five channel system requires set-up using “IWR Set” user software*
Temperatures & Thermal Effects
Media 2Temperature - 0ºC to +135ºC
Ambient Temperature -20ºC to +80ºC
Storage emperature - 0ºC to + ºCT280
Thermal Zero Shift <±0.04% / /ºCFS
Thermal Span Shift ±0.0 % /ºC< 2 typical
Mechanical Stability
See user manual
Ordering Codes:-
Pressure Transducer See table below
Spare battery IBAT-1
Single Channel Receiver IWR-1
Five Channel Receiver IWR-5
Five Channel Configuration Software* IWR-Set
Swivel Adaptor IWPT-SA
IWPTL Series
Low Range Industrial Wireless Pressure Transducer
Part Number Pressure Rating Receiver Output
IWPTL-G0050-00 0 - 50mbar G 1-5Vdc or 4-20mA
IWPTL-G0100-00 0 - 100mbar G 1-5Vdc or 4-20mA
IWPTL-G0250-00 0 - 250mbar G 1-5Vdc or 4-20mA
IWPTL-G0500-00 0 - 500mbar G 1-5Vdc or 4-20mA
IWPTL-G0750-00 0 - 750mbar G 1-5Vdc or 4-20mA
IWPTL-G1000-00 0 - 1000mbar G 1-5Vdc or 4-20mA
IWPTL-A0500- 00 0 - 500mbar Abs 1-5Vdc or 4-20mA
IWPTL-A0750- 00 0 - 750mbar Abs 1-5Vdc or 4-20mA
IWPTL-A1000- 00 0 - 1000mbar Abs 1-5Vdc or 4-20mA
60 nominal
Mechanical Dimensions
Made in the UK
*Download user configuration software here:-
https://www.cynergy3.com/sites/default/files/IWR-Set_v2.1_installer_0.exe
