Revised September 2004 NC7SZ10 TinyLogic UHS 3-Input NAND Gate General Description Features The NC7SZ10 is a single 3-Input NAND Gate from Fairchild's Ultra High Speed Series of TinyLogic. The device is fabricated with advanced CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a broad VCC operating range. The device is specified to operate over the 1.65V to 5.5V VCC operating range. The inputs and output are high impedance when VCC is 0V. Inputs tolerate voltages up to 7V independent of VCC operating voltage. Space saving SC70 6-lead package Ultra small MicroPak leadless package Ultra High Speed; tPD 2.4 ns typ into 50 pF at 5V VCC High Output Drive; 24 mA at 3V VCC Broad VCC Operating Range; 1.65V-5.5V Power down high impedance inputs/output Overvoltage tolerant inputs facilitate 5V to 3V translation Patented noise/EMI reduction circuitry implemented Ordering Code: Package Product Code Number Top Mark NC7SZ10P6X MAA06A Z10 6-Lead SC70, EIAJ SC88, 1.25mm Wide 3k Units on Tape and Reel NC7SZ10L6X MAC06A E6 6-Lead MicroPak, 1.0mm Wide 5k Units on Tape and Reel Order Number Package Description Supplied As Connection Diagrams Logic Symbol IEEE/IEC Pin Assignments for SC70 Pin Descriptions Pin Names Description (Top View) A, B, C Inputs Pin One Orientation Diagram Y Output Function Table Y = ABC Inputs A B X X Output C Y X L H L X H L X X H H H H L AAA represents Product Code Top Mark - see ordering code Note: Orientation of Top Mark determines Pin One location. Read the Top Product Code Mark left to right, Pin One is the lower left pin (see diagram). Pad Assignments for MicroPak H = HIGH Logic Level L = LOW Logic Level X = Either LOW or HIGH Logic Level (Top Thru View) TinyLogic is a registered trademark of Fairchild Semiconductor Corporation. MicroPak is a trademark of Fairchild Semiconductor Corporation. (c) 2004 Fairchild Semiconductor Corporation DS500464 www.fairchildsemi.com NC7SZ10 TinyLogic UHS 3-Input NAND Gate August 2001 NC7SZ10 Absolute Maximum Ratings(Note 1) Recommended Operating Conditions (Note 2) Supply Voltage (VCC ) -0.5V to +7.0V DC Input Voltage (VIN) -0.5V to +7.0V Supply Voltage Operating (VCC) DC Output Voltage (VOUT) -0.5V to +7.0V Supply Voltage Data Retention (VCC) DC Input Diode Current (IIK) 1.65V to 5.5V 1.5V to 5.5V Input Voltage (VIN) 0V to 5.5V @VIN < -0.5V -50 mA Output Voltage (VOUT ) @ VIN > 6V +20 mA Operating Temperature (TA) DC Output Diode Current (IOK) 0V to VCC -40C to +85C Input Rise and Fall Time (tr, tf) @VOUT < -0.5V -50 mA VCC @ 1.8V, 2.5V 0.2V 0 ns/V to 20 ns/V @ VOUT > 6V, VCC = GND +20 mA VCC @ 3.3V 0.3V 0 ns/V to 10 ns/V VCC @ 5.0V 0.5V 0 ns/V to 5 ns/V DC Output Current (IOUT) 50 mA DC VCC/GND Current (ICC/IGND) 50 mA Thermal Resistance (JA) -65C to +150 C Storage Temperature (TSTG) Note 1: Absolute maximum ratings are DC values beyond which the device may be damaged or have its useful life impaired. The datasheet specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation outside datasheet specifications. Junction Lead Temperature (TL); 260 C (Soldering, 10 seconds) Power Dissipation (PD) @ +85C SC70-5 425C/W SC70-5 150 C Junction Temperature under Bias (TJ) 150 mW Note 2: Unused inputs must be held HIGH or LOW. They may not float. DC Electrical Characteristics Symbol VIH Parameter HIGH Level Input Voltage (V) VOH VOL LOW Level Input Voltage HIGH Level Output Voltage LOW Level Output Voltage IIN Input Leakage Current IOFF Power Off Leakage Current ICC Quiescent Supply Current www.fairchildsemi.com Min Typ TA = -40C to +85C Max 1.65 to 1.95 0.75 VCC 2.3 to 5.5 VIL TA = +25C VCC Min Max 0.75 VCC 1.65 to 1.95 0.25 VCC 0.25 VCC 2.3 to 5.5 0.30 VCC 0.30 VCC 1.65 1.55 1.65 1.55 2.3 2.2 2.3 2.2 3.0 2.9 3.0 2.9 Conditions V 0.70 VCC 0.70 VCC Units V VIN = VIL IOH = -100 A 4.5 4.4 4.5 4.4 1.65 1.29 1.52 1.29 2.3 1.9 2.15 1.9 IOH = -8 mA 3.0 2.4 2.80 2.4 IOH = -16 mA 3.0 2.3 2.68 2.3 IOH = -24 mA 4.5 3.8 4.20 3.8 V IOH = -4 mA IOH = -32 mA 1.65 0.0 0.1 0.1 2.3 0.0 0.1 0.1 3.0 0.0 0.1 0.1 VIN = VIH IOL = 100 A 4.5 0.0 0.1 0.1 1.65 0.08 0.24 0.24 2.3 0.10 0.3 0.3 IOL = 8 mA 3.0 0.15 0.4 0.4 IOL = 16 mA 3.0 0.22 0.55 0.55 IOL = 24 mA 4.5 0.22 0.55 0.55 1 10 A VIN = 5.5V, GND 0.0 1 10 A VIN or VOUT = 5.5V 1.65 to 5.5 2.0 20 A VIN = 5.5V, GND 0 to 5.5 2 V IOL = 4 mA IOL = 32 mA Symbol tPLH, Parameter Propagation Delay tPHL tPLH, Propagation Delay tPHL CIN Input Capacitance CPD Power Dissipation Capacitance TA = +25C VCC (V) Min Typ TA = -40C to +85C Max Min Max 1.8 0.15 2.0 7.0 17.5 2.0 18.0 2.5 0.2 0.8 3.0 10.5 0.8 11.0 3.3 0.3 0.5 2.4 7.5 0.5 8.0 5.0 0.5 0.5 2.0 5.5 0.5 6.0 3.3 0.3 1.5 2.9 8.5 1.5 9.0 5.0 0.5 0.8 2.4 7.5 0.8 8.0 0 4 3.3 24 5.0 30 Units ns ns Conditions CL = 15 pF, RL = 1 M CL = 50 pF, Figure Number Figures 1, 3 RL = 500 Figures 1, 3 (Note 3) Figure 2 pF pF Note 3: CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output loading and operating at 50% duty cycle. (See Figure 2.) CPD is related to ICCD dynamic operating current by the expression: ICCD = (C PD)(VCC)(fIN) +(ICCstatic). AC Loading and Waveforms CL includes load and stray capacitance Input PRR = 1.0 MHz; tw = 500 ns FIGURE 1. AC Test Circuit FIGURE 3. AC Waveforms Input = AC Waveform; tr = tf = 1.8 ns; PRR = 10 MHz; Duty Cycle = 50% FIGURE 2. ICCD Test Circuit 3 www.fairchildsemi.com NC7SZ10 AC Electrical Characteristics NC7SZ10 Tape and Reel Specification Tape Format for SC70 Package Designator P6X Tape Number Cavity Section Cavities Status Cover Tape Status Leader (Start End) 125 (typ) Empty Sealed Carrier 3000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed TAPE DIMENSIONS inches (millimeters) Package SC70-6 Tape Size 8 mm www.fairchildsemi.com DIM A DIM B 0.093 0.096 (2.35) (2.45) DIM F DIM Ko 0.138 0.004 0.053 0.004 (3.5 0.10) 4 (1.35 0.10) DIM P1 DIM W 0.157 0.315 0.004 (4) (8 0.1) (Continued) Tape Format for MicroPak Package Tape Number Cavity Designator Section Cavities Status Status Leader (Start End) 125 (typ) Empty Sealed L6X Cover Tape Carrier 5000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed REEL DIMENSIONS inches (millimeters) Tape Size 8 mm A B C D N W1 W2 W3 7.0 0.059 0.512 0.795 2.165 0.331 + 0.059/-0.000 0.567 W1 + 0.078/-0.039 (177.8) (1.50) (13.00) (20.20) (55.00) (8.40 + 1.50/-0.00) (14.40) (W1 + 2.00/-1.00) 5 www.fairchildsemi.com NC7SZ10 Tape and Reel Specification NC7SZ10 Physical Dimensions inches (millimeters) unless otherwise noted 6-Lead SC70, EIAJ SC88, 1.25mm Wide Package Number MAA06A www.fairchildsemi.com 6 NC7SZ10 TinyLogic UHS 3-Input NAND Gate Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 6-Lead MicroPak, 1.0mm Wide Package Number MAC06A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 7 www.fairchildsemi.com