NC7SZ10L6X - Fairchild Semiconductor Corporation

August 2001

Revised September 2004

NC7SZ10 TinyLogic



UHS 3-Input NAND Gate

NC7SZ10

TinyLogic UHS 3-Input NAND Gate

General Description

The NC7SZ10 is a single 3-Input NAND Gate from

Fairchild’s Ultra High Speed Series of TinyLogic. The

device is fabricated with advanced CMOS technology to

achieve u ltra high speed wi th h igh output dri ve w hile main-

taining low static po wer dissipation over a br oad VCC oper-

ating range. The device is specified to operate over the

1.65V to 5.5 V VCC opera ting range. Th e inputs and output

are high impedance when VCC is 0V. Inputs tolerate volt-

ages up to 7V independent of VCC operating voltage.

Features

■Space sa ving S C70 6-lead packag e

■Ultra small MicroPak leadless packa ge

■Ultra High Speed; tPD 2.4 ns typ into 50 pF at 5V VCC

■High Output Drive; ±24 mA at 3V VCC

■Broad VCC Operating Range; 1.65V–5.5V

■Power down high impedance inputs/output

■Overvoltage tolerant inputs facilitate 5V to 3V translation

■Patented noise/EMI reduction circuitry implemented

Ordering Code:

Logic Symbol

IEEE/IEC

Pin Descriptions

Function Table

Y = ABC

H = HIGH Logic Le v el

L = LOW Logic Le v el

X = Either LOW or HIGH Logic Level

Connection Diagrams

Pin Assignments for SC70

(Top View)

Pin One Orientation Diagram

AAA represents Product Code Top Mark - see ordering code

Note: Orientat ion of Top Ma rk determ ines P in On e location . Rea d the Top

Product Code Mark left to right, Pin One is the lower left pin (see diagram).

Pad Assignments for MicroPak

(Top Thru View)

TinyLogic is a registere d t rademark of F airc hild Semicond uc t or Corporation.

MicroPak is a trad em ark of Fairchild Sem icond uc t or Corporation.

Order Number Package Product Code Package Description Supplied As

Numbe r Top Mark

NC7SZ10P6X MAA06A Z10 6-Lead SC70, EIAJ SC88, 1.25mm Wide 3k Units on Tape and Reel

NC7SZ10L6X MAC06A E6 6-Lead MicroPak, 1.0mm Wide 5k Units on Tape and Reel

Pin Names Description

A, B, C Inputs

Y Output

Inputs Output

ABCY

XXL H

XLX H

LXX H

HHH L

www.fairchildsemi.com 2

NC7SZ10

Absolute Maximum Ratings(Note 1) Recommended Operating

Conditions (Note 2)

Note 1: Absolute maxi mum rat ings are DC val ues beyo nd which the devi ce

may be d ama ged or hav e it s u sef ul lif e im pai red . Th e data shee t sp ecif ica-

tions should be met, without exception, to ensure that the system design is

reliable over its power supply, temperature, and output/input loading vari-

ables. F airchild does not recomm end operatio n outside datashe et specifi-

cations.

Note 2: Unu s ed inputs m ust be he ld H I GH or LOW. They ma y not fl oat.

DC Electrical Characteristics

Supply Voltage (VCC)−0.5V to +7.0V

DC Input Voltage (VIN)−0.5V to +7.0V

DC Output Voltage (VOUT)−0.5V to +7.0V

DC Input Diode Current (IIK)

@VIN < −0.5V −50 mA

@ VIN > 6V +20 mA

DC Output Diode Current (IOK)

@VOUT < −0.5V −50 mA

@ VOUT > 6V, VCC = GND +20 mA

DC Output Current (IOUT)± 50 mA

DC VCC/GND Current (ICC/IGND)± 50 mA

Storage Temperature (TSTG)−65°C to +150°C

Junction Temperature under Bias (TJ) 150°C

Junction Lead Temperature (TL);

(Solder ing, 10 seco nds) 260°C

Power Dissipation (PD) @ +85°C

SC70–5 150 mW

Supply Voltage Operating (VCC) 1.65V to 5.5V

Supply Voltage Data Retention (VCC) 1.5V to 5.5V

Input Voltage (VIN) 0V to 5.5V

Output Voltage (VOUT)0V to V

Operating Temperature (TA)−40°C to +85°C

Input Rise and Fall Time (tr, tf)

VCC @ 1.8V, 2.5V ±0.2V 0 ns/V to 20 ns/V

VCC @ 3.3V ± 0.3V 0 ns/V to 10 ns/V

VCC @ 5.0V ± 0.5V 0 ns/V to 5 ns/V

Thermal Resistance (θJA)

SC70-5 425°C/W

Symbol Parameter VCC TA = +25°CT

A = −40°C to +85°CUnits Conditions

(V) Min Typ Max Min Max

VIH HIGH Level Input Voltage 1.65 to 1.95 0.75 VCC 0.75 VCC V

2.3 to 5.5 0.70 VCC 0.70 VCC

VIL LOW Level Input Voltage 1.65 to 1.95 0.25 VCC 0.25 VCC V

2.3 to 5.5 0.30 VCC 0.30 VCC

VOH HIGH Level Output Voltage 1.65 1.55 1.65 1.55

VIN = VIL IOH = −100 µA

2.3 2.2 2.3 2.2

3.0 2.9 3.0 2.9

4.5 4.4 4.5 4.4

1.65 1.29 1.52 1.29 IOH = −4 mA

2.3 1.9 2.15 1.9 IOH = −8 mA

3.0 2.4 2.80 2.4 IOH = −16 mA

3.0 2.3 2.68 2.3 IOH = −24 mA

4.5 3.8 4.20 3.8 IOH = −32 mA

VOL LOW Level Output Voltage 1.65 0.0 0.1 0.1

VIN = VIH IOL = 100 µA

2.3 0.0 0.1 0.1

3.0 0.0 0.1 0.1

4.5 0.0 0.1 0.1

1.65 0.08 0.24 0.24 IOL = 4 mA

2.3 0.10 0.3 0.3 IOL = 8 mA

3.0 0.15 0.4 0.4 IOL = 16 mA

3.0 0.22 0.55 0.55 IOL = 24 mA

4.5 0.22 0.55 0.55 IOL = 32 mA

IIN Input Leakage Current 0 to 5.5 ±1±10 µAV

IN = 5.5V, GND

IOFF Power Off Leakage Current 0.0 1 10 µAV

IN or VOUT = 5.5V

ICC Quiescent Supply Current 1.65 to 5.5 2.0 20 µAV

IN = 5.5V, GND

3 www.fairchildsemi.com

NC7SZ10

AC Electrical Characteristics

Note 3: CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output

loading and operating at 50% duty cycle. (See Figure 2.) CPD is related to ICCD dyna m ic opera t ing current by th e ex pression:

ICCD = (CPD)(VCC)(fIN) +(ICCstatic).

AC Loading and Waveforms

CL include s l oad and str ay c apacitan ce

Input PRR = 1.0 MHz; t w = 500 ns

FIGURE 1. AC Test Circuit

Input = AC Wav efo r m; tr = tf = 1.8 ns ;

PRR = 10 MHz; Duty Cycle = 50%

FIGURE 2. ICCD Test Circuit

FIGURE 3. AC Waveforms

Symbol Parameter VCC TA = +25°CT

A = −40°C to +85°CUnits Conditions Figure

(V) Min Typ Max Min Max Number

tPLH, Propagation Delay 1.8 ± 0.15 2.0 7.0 17.5 2.0 18.0

ns Figures

1, 3

tPHL 2.5 ± 0.2 0.8 3.0 1 0.5 0.8 11 .0 CL = 15 pF,

3.3 ± 0.3 0.5 2.4 7.5 0.5 8.0 RL = 1 MΩ

5.0 ± 0.5 0.5 2.0 5.5 0.5 6.0

tPLH, Propagation Delay 3.3 ± 0.3 1.5 2.9 8.5 1.5 9.0 ns CL = 50 pF, Figures

1, 3

tPHL 5.0 ± 0.5 0.8 2.4 7.5 0.8 8.0 RL = 500Ω

CIN Input Capacitance 0 4 pF

CPD Power Dissipation Capacitance 3.3 24 pF (Note 3) Figure 2

5.0 30

www.fairchildsemi.com 4

NC7SZ10

Tape and Reel Specification

Tape Format for SC70

TAPE DIMENSIONS inches (millimeters)

Package Tape Number Cavity Cover Tape

Designator Section Cavities Status Status

Leader (Start End) 125 (typ) Empty Sealed

P6X Carrier 3000 Filled Sealed

Trailer (Hub End) 75 (typ) Empty Sealed

Package Tape Size DIM A DIM B DIM F DIM KoDIM P1 DIM W

SC70-6 8 mm 0.093 0.096 0.138 ± 0.004 0.053 ± 0.004 0.157 0.315 ± 0.004

(2.35) (2.45) (3.5 ± 0.1 0) (1.35 ± 0.10) (4) (8 ± 0.1)

5 www.fairchildsemi.com

NC7SZ10

Tape and Reel Specification (Continu ed)

Tape Format for MicroPak

REEL DIMENSIONS inches (millimeters)

Packa ge Tape N umb er Cavity Cove r Tape

Designator Section Cavities Status Status

Leader (Start End) 125 (typ) Empty Sealed

L6X Carrier 5000 Filled Sealed

Trailer (Hub End) 75 (typ) Empty Sealed

Tape

Size ABCDN W1 W2 W3

8 mm 7.0 0.059 0.512 0.795 2.165 0.331 + 0.0 59/ −0.000 0.567 W1 + 0.078/−0.039

(177.8) (1.50) (13.00) (20.20) (55.00) (8.40 + 1.50/−0.00) (14.40) (W1 + 2.00/−1.00)

www.fairchildsemi.com 6

NC7SZ10

Physical Dimensions inches (millimeters) unless otherwise noted

6-Lead SC70, EIAJ SC88, 1.25mm Wide

Package Number MAA06A

7 www.fairchildsemi.com

NC7SZ10 TinyLogic



UHS 3-Input NAND Gate

Physical Dimensions inches (millimeters) unless otherwise noted (Continued)

6-Lead MicroPak, 1.0mm Wide

Package Number MAC06A

Fairchild does not assume an y respon sibility for use of any circuitry described, no circuit pat ent licenses ar e implied and

Fairchild reserves the right at any time without notice to change said circuitry and specifications.

LIFE SUPPORT POLICY

FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT

DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD

SEMICONDUCTOR CORPORATION. As used herein:

1. Life support de vices o r syst ems are devices or syste ms

which, (a) are intended for surgical implant into the

body, or (b) support or sustain life, and (c) whose failure

to perform when properly used in accordance with

instruct ions fo r use pr ovi de d in the l abe ling, can be rea-

sonably expected to result in a significant injury to the

user.

2. A critica l compo nent in any compo nent o f a li fe supp ort

device or system whose failure to perform can be rea-

sonabl y e xpec ted to cause th e fa i lure of the l ife s upport

device or system, or to affect its safety or effectiveness.