S1331156115 - Carlo Gavazzi Group

Specifications are subject to change without notice (25.10.99) 1

Timers

• µP-based digital multi-function timer

• 10 functions within delay on operate, interval timer,

symmetrical recycler, recycler with fixed ON time,

time period multiplier

• Time ranges: 0.01 s to 99 h

• Digital trigger input for time start and reset

• Time stop input

• Four yellow LEDs each indicating 25% of remaining

time

• Connection for NPN sensor

• Plug-in module, S-housing

• Output: 5 A SPDT relay

• LED-indication for relay and power supply ON

• AC or DC power supply

Product Description

Plug-in, µP-based, multifunc-

tion time relay with 10 select-

able modes of operation and

time ranges from 10 ms to 99

h. Function and time range

setting by 3 rotary switches in

Ordering Key

Housing

Type/function

Output

Power supply

the front. Time setting by two

digital thumb-wheel switches

in the front. Time controlled

by contact, open collector

output (NPN) or power supply.

Type Selection

Plug Output Supply: 24 VAC Supply: 115 VAC Supply: 230 VAC Supply: 24 VDC

Circular SPDT S 1331 156 024 S 1331 156 115 S 1331 156 230 S 1331 156 724

Output Specifications

Output SPDT

Rated insulation voltage

250 VAC (rms) (cont./elect.)

Contact ratings (AgCdO) µ (micro gap)

(IEC 60947-5-1/IEC 60337)

Resistive loads AC 1 5 A, 250 VAC

DC 1 5 A, 24 VDC

Small inductive loads AC 15

2 A, 250 VAC

DC 13

3 A, 24 VDC

Mechanical life ≥40 x 106operations

Electrical life 105operations (at max. load)

Operating frequency ≤typ. 50 Hz

Operating time < 10 ms

Release time (at nom. supply) < 6 ms

Dielectric strength

Dielectric (AC rms)

test voltage ≥2.0 kVAC (rms) (cont./elect.)

Rated impulse withstand

voltage 4 kV (1.2/50 µs) (cont./elect.)

(IEC 60664)

Time Specifications

Time ranges

Selectable by rotary switches 0.01 - 0.99 s

0.1 - 9.9 s

1 - 99 s

0.01 - 0.99 m

0.1 - 9.9 m

1 - 99 m

0.01 - 0.99 h

0.1 - 9.9 h

1 - 99 h

Accuracy ≤0.5%, ±20 ms

Repeatability deviation ≤0.01%

Time variation

within rated ambient temp. 0.008%/°C

Reset

Time and/or relay Interconnect pins 5 & 7

24 VDC, 5 mA

Time stop Interconnect pins 7 & 8

24 VDC, 5 mA

Input interruption ≥10 ms

Sensor supply output Pins 6 & 7, pin 6 positive

24 VDC, 10 mA

Digital Multi-function

Type S 1331

S 1331 156 230

2Specifications are subject to change without notice (25.10.99)

Supply Specifications

Power supply AC types

Overvoltage cat. III (IEC 60664)

Rated operational voltage

through pins 2 & 10 230

230 VAC ±15%, 45 to 65 Hz

115 115 VAC ±15%, 45 to 65 Hz

024 24 VAC ±15%, 45 to 65 Hz

Voltage interruption ≤40 ms

Rated insulation voltage ≥250 VAC (rms)

Rated operational power 3.0 VA

Rated impulse withstand voltage

4 kV (1.2/50 µs) (line/neutral)

Power supply DC type

Overvoltage cat. III (IEC 60664)

Rated operational volt. 724 24 VDC ±15% (pin 2 pos.)

Rated insulation voltage None

Rated operational power 1.5 W

Rated impulse withstand voltage

800 V (1.2/50 µs)

General Specifications

Power ON delay ≤150 ms

Power OFF delay ≥200 ms

Indication for

Power supply ON LED, green

Output ON LED, yellow

Remaining time to elapse 4 LEDs, yellow, 25% each

Environment

Degree of protection IP 20 B

Pollution degree 2 (IEC 60664)

Operating temperature 0° to +50°C (+34° to +122°F)

Storage temperature -50° to +85°C (-58° to +185°F)

Weight AC supply 200 g

DC supply 125 g

Approvals UL, CSA

S 1331

Mode of Operation

In connection with all func-

tions automatic start is pos-

sible by permanent intercon-

nection of pins 5 & 7.

Function 0: Delay on operate,

leading edge, man. start,

man. restart, man. time reset.

Function 1: Interval timer,

leading edge, man. start,

man. restart, man. time reset.

Function 2: Symmetrical

recycler, OFF-time first, lea-

ding edge, man. start, man.

restart, no time reset.

Function 3: Symmetrical

recycler, ON-time first, lea-

ding edge, man. start, man.

restart, no time reset.

Function 4: Delay on operate,

trailing edge, man. start, man.

restart, man. time reset.

Function 5: Interval timer,

trailing edge, man. start, man.

restart, man. time reset.

Note: The output relay only

operates when the time peri-

od is running.

Function 6: Interval timer,

trailing edge, man. start, man.

restart, man. time reset.

Function 7: Delay on operate,

leading edge, man. start,

man. restart, man. time reset.

Note: The relay releases on

trailing edge, which means

the trigger pulse must be of

longer duration than the time

period.

Function 8: Recycler with fix-

ed ON-time, leading edge,

man. start, man. restart, no

time reset. Fixed ON-time:

approx. 0.5 sec.

Function 9: Time period mul-

tiplier, leading edge, man.

start, man. restart, man. time

reset.

Note: Each pulse input adds

the set time the total timing

period. Max. time period

memory is 256 pulses.

Time stop function: By inter-

connection of pins 7 & 8 the

time function stops, and the

output relay remains either

released or operated. By dis-

connection of pins 7 & 8 the

remaining time continues to

elapse.

Accessories Function and Time Setting

Adjustable time setting by two

digital thumb-wheel switches

(1-99)

Upper knob:

Time period multiplier x 0.01,

x 0.1 and x 1.0.

Socket◊S 411

Hold down spring◊HF

Mounting rack SM 13

Socket cover BB 4

Front mounting bezel FRS 2

All 3/4-wire sensor types with NPN open collector output.

For further information refer to "Accessories".

For other AC/DC voltages refer to "General Information".

Centre knob:

Selection of time range

(seconds, minutes and hours).

Lower knob:

Selection of function.

Specifications are subject to change without notice (25.10.99) 3

Wiring Diagrams

AC DC

Operation Diagrams

Power supply

F 0 Relay ON

F 1 Relay ON

F 2 Relay ON

F 3 Relay ON

F 4 Relay ON

F 5 Relay ON

F 6 Relay ON

F 7 Relay ON

F 8 Relay ON

F 9 Relay ON

Pulse/time

multiplier (5-7)

Power supply

Pulse input (5-7) Pulse input (5-7)