ST232A VERY HIGH SPEED, ULTRA LOW POWER CONSUMPTION 5V POWERED RS-232 DRIVERS AND RECEIVERS SUPPLY VOLTAGE RANGE: 4.5 TO 5.5V SUPPLY CURRENT NO LOAD (TYP): 1.5mA TRASMITTER OUTPUT VOLTAGE SWING (TYP): 9V TRANSITION SLEW RATE (TYP.): 12V/s RECEIVER PROPAGATION DELAY (TYP.): 0.1s RECEIVER INPUT VOLTAGE RANGE: 30V DATA RATE (TYP.): 400Kbp/s OPERATING TEMPERATURE RANGE: -40 TO 85 C, 0 TO 70C DESCRIPTION The ST232A is a 2 driver, 2 receiver device following EIA/TIA-232 and V.28 communication standard. It is particularly suitable for applications where 12V is not available. The ST232 uses a single 5V power supply and only four external capacitors (0.1F). Typical application are in: Portable Computers, Low Power Modems, Interfaces Translation, Battery Powered RS-232 Networks. DIP SOP SOP Large TSSOP ORDERING CODES Type Temperature Range Package Comments ST232ACN ST232ABN ST232ACD ST232ABD ST232ACDR ST232ABDR ST232ACW 0 to 70 C -40 to 85 C 0 to 70 C -40 to 85 C 0 to 70 C -40 to 85 C 0 to 70 C DIP-16 DIP-16 SO-16 (Tube) SO-16 (Tube) SO-16 (Tape & Reel) SO-16 (Tape & Reel) SO-16 Large (Tube) 25parts per tube / 40tube per box 25parts per tube / 40tube per box 49parts per tube / 25tube per box 49parts per tube / 25tube per box 2500 parts per reel 2500 parts per reel 50parts per tube / 20tube per box ST232ABW ST232ACWR ST232ABWR ST232ACTR ST232ABTR -40 to 85 C 0 to 70 C -40 to 85 C 0 to 70 C -40 to 85 C SO-16 Large (Tube) SO-16 Large (Tape & Reel) SO-16 Large (Tape & Reel) TSSOP16 (Tape & Reel) TSSOP16 (Tape & Reel) 50parts per tube / 20tube per box 1000 parts per reel 1000 parts per reel 2500 parts per reel 2500 parts per reel February 2001 1/10 ST232A PIN CONFIGURATION PIN DESCRIPTION PlN N SYMBOL NAME AND FUNCTION 1 C 1+ Positive Terminal for the first Charge Pump Capacitor 2 3 V+ C1 - Doubled Voltage Terminal Negative Terminal for the first Charge Pump Capacitor 4 C 2+ Positive Terminal for the second Charge Pump Capacitor 5 C2 - Negative Terminal for the second Charge Pump Capacitor 6 V- Inverted Voltage Terminal Second Transmitter Output Voltage 7 T2OUT 8 R2IN 9 R2OUT Second Receiver Output Voltage 10 T2IN Second Transmitter Input Voltage 11 T1IN First Transmitter Input Voltage 12 R1OUT First Receiver Output Voltage Second Receiver Input Voltage 13 R1IN 14 T1OUT First Transmitter Output Voltage 15 GND V CC Ground Supply Voltage 16 First Receiver Input Voltage ABSOLUTE MAXIMUM RATINGS Symbol Parameter Value Unit -0.3 to 6 V V CC Supply Voltage V+ Extra Positive Voltage (VCC -0.3) to 13.2 V VTIN Extra Negative Voltage Transmitter Input Voltage Range 0.3 to -13.2 -0.3 to (VCC + 0.3) V RIN Receiver Input Voltage Range 30 V V TOUT Transmitter Output Voltage Range 15 V R OUT Receiver Output Voltage Range -0.3 to (VCC + 0.3) V TSCTOUT Short Circuit Duration on TOUT infinite Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these condition is not implied. 2/10 ST232A ELECTRICAL CHARACTERISTICS (C1 - C4 = 0.1F, VCC = 5V 10%, TA = -40 to 85C, unless otherwise specified. Typical values are referred to TA = 25C) Symbol Parameter ISUPPLY VCC Power Supply Current Test Condit ions Min. Typ. Max. Unit 1.5 4 mA Min. Typ. Max. Unit 5 9 0.8 1.4 No Load TRANSMITTER ELECTRICAL CHARACTERISTICS (C1 - C4 = 0.1F, VCC = 5V 10%, TA = -40 to 85C, unless otherwise specified. Typical values are referred to TA = 25C) Symbol Parameter TTOUT Output Voltage Swing ITIL Logic Pull-Up Current VTIL Input Logic Threshold Low VTIH Input Logic Threshold High SRT Transition Slew Rate DR Data Rate RTOUT ISC tdT Transmitter Output Resistance Transmitter Output Short Circuit Current Propagation Delay Time Test Condit ions All Transmitter outputs are loaded with 3K to GND T IN = 0V TA = 25C, R L = 3 to 7K, (Note1) (Note 2) VCC = 5V CL = 50 to 2500pF V CC = V+ = V- = 0V VOUT = 2V one TXOUT to GND 5 V 40 A V 1.4 2 V 6 12 30 V/s 200 400 Kbits/s 300 10M 7 22 mA TTL-CMOS IN to RS-232 OUT C L = 150pF (50% to 50%) 1.3 3.5 s Typ. Max. Unit 30 V 7 K Note 1: Measured from 3V to -3V or from -3V to 3V. Note2: One trasmitter output is loaded with RL = 3K to 7K, CL = 50 to 1000pF RECEIVER ELECTRICAL CHARACTERISTICS (C1 - C4 = 0.1F, VCC = 5V 10%, TA = -40 to 85C, unless otherwise specified. Typical values are referred to TA = 25C) Symbol VRIN RRIN Parameter Receiver Input Voltage Operating Range RS-232 Input Resistance Test Condit ions -30 TA = 25C VRIL RS-232 Input Threshold Low VRIH RS-232 Input Threshold High VRIHYS RS-232 Input Hysteresis V ROL TTL/CMOS Output Voltage Low VROH TTL/CMOS Output Voltage High ISCR Receiver Output Short Circuit Current tdR Propagation Delay Time Min. V CC = 5V 3 5 0.8 1.3 0.2 IOUT = 3.2mA (to VCC) V 1.8 2.4 V 0.5 1 V 0.2 0.4 V IOUT = 1mA (to GND) 3.5 V CC-0.2 V to GND to VCC 2 10 10 30 mA mA CL = 150pF (Note 1) 0.1 0.5 s Note 1: RS-232 IN to TTL-CMOS OUT (from 50% to 50%) 3/10 ST232A APPLICATION CIRCUITS (note 1, note 2) Note 1: C1-4 capacitors can even be 1F ones. Note 2: C1-4 can be common or biased capacitors. CAPACITANCE VALUE (F) 4/10 C1 C2. C3 C4 C5 0.1 0.1 0.1 0.1 0.1 ST232A TYPICAL PERFORMANCE CHARACTERISTICS (unless otherwise specified Tj = 25C) Figure 1 : Driver Voltage Transfer Characteristics Figure 4 : Driver Output Current vs Output Voltage Figure 2 : Drive Short Circuit Output Current vs Temperature Figure 5 : Driver Short Circuit Supply Current vs Temperature Figure 3 : Receiver Threshold vs Supply Voltage Figure 6 : Receiver Threshold vs Temperature 5/10 ST232A Plastic DIP-16 (0.25) MECHANICAL DATA mm DIM. MIN. a1 0.51 B 0.77 TYP. inch MAX. MIN. TYP. MAX. 0.020 1.65 0.030 0.065 b 0.5 0.020 b1 0.25 0.010 D 20 0.787 E 8.5 0.335 e 2.54 0.100 e3 17.78 0.700 F 7.1 0.280 I 5.1 0.201 L Z 3.3 0.130 1.27 0.050 P001C 6/10 ST232A SO-16 MECHANICAL DATA mm DIM. MIN. TYP. A a1 inch MAX. MIN. TYP. 1.75 0.1 0.068 0.2 a2 MAX. 0.004 0.007 1.65 0.064 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 0.019 c1 45 (typ.) D 9.8 10 0.385 0.393 E 5.8 6.2 0.228 0.244 e 1.27 0.050 e3 8.89 0.350 F 3.8 4.0 0.149 0.157 G 4.6 5.3 0.181 0.208 L 0.5 1.27 0.019 0.050 M S 0.62 0.024 8 (max.) P013H 7/10 ST232A SO16L MECHANICAL DATA mm DIM. MIN. TYP. A a1 inch MAX. MIN. TYP. 2.65 0.1 0.104 0.2 a2 MAX. 0.004 0.008 2.45 0.096 b 0.35 0.49 0.014 0.019 b1 0.23 0.32 0.009 0.012 C 0.5 0.020 c1 45 (typ.) D 10.1 10.5 0.397 0.413 E 10.0 10.65 0.3.93 0.419 e 1.27 e3 0.050 8.89 0.350 F 7.4 7.6 0.291 0.300 L 0.5 1.27 0.020 0.050 M S 0.75 0.029 8 (max.) P013I 8/10 ST232A TSSOP16 MECHANICAL DATA mm DIM. MIN. inch TYP. A MAX. MIN. TYP. MAX. 1.1 0.433 A1 0.05 0.10 0.15 0.002 0.004 0.006 A2 0.85 0.9 0.95 0.335 0.354 0.374 b 0.19 0.30 0.0075 0.0118 c 0.09 0.20 0.0035 0.0079 D 4.9 5 5.1 0.193 0.197 0.201 E 6.25 6.4 6.5 0.246 0.252 0.256 E1 4.3 4.4 4.48 0.169 0.173 0.176 e 0.65 BSC 0.0256 BSC K 0o 4o 8o 0o 4o 8o L 0.50 0.60 0.70 0.020 0.024 0.028 A A2 A1 b e K c L E D E1 PIN 1 IDENTIFICATION 1 9/10 ST232A Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringe ment of patents or other righ ts of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this pub lication are subject to change without notice. Thi s pub lication supersedes and replaces all information previously supplied. STMicroelectronics prod ucts are not authori zed for use as critical components in life suppo rt devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics 2000 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Swit zerland - United Kingdom http://w ww.st.com 10/10