Nylon Insulated Ring—Insulation Grip
Wt./Lbs.
Cat. Pkg. Wire Max. Bolt Per Dimensions
No. Qty. Range Ins. Hole 1000 A B C M
RZ22-2** 100 26-22 .083 #2 1 .57 .14 .13 .49
RZ22-4** 100 26-22 .083 #4 1 .65 .21 .20 .54
RZ22-6** 100 26-22 .083 #6 1 .65 .21 .20 .54
RZ22-8** 100 26-22 .083 #8 1 .75 .25 .23 .62
RZ22-10** 100 26-22 .083 #10 1 .75 .25 .23 .62
RAX23* 1000 26-24 .125 #2 3 .66 .14 .14 .59
RAX43* 1000 26-24 .125 #4 3 .74 .20 .19 .64
RAX63* 1000 26-24 .125 #6 3 .84 .25 .22 .72
RAX83* 1000 26-24 .125 #8 3 .84 .25 .22 .72
RAX103* 1000 26-24 .125 #10 3 .84 .25 .24 .72
RA18-4 100 22-16 .136 #4 2 .70 .23 .14 .59
RA323 1000 22-16 .136 #4 2 .70 .23 .14 .59
RA333 1000 22-16 .136 #6 2 .70 .23 .14 .59
RA18-6 100 22-16 .136 #6 2 .83 .26 .25 .71
RA853 1000 22-16 .136 #6 2 .83 .26 .25 .71
RA18-8 100 22-16 .136 #8 3 .83 .26 .25 .71
RA833 1000 22-16 .136 #8 3 .83 .26 .25 .71
RA863 1000 22-16 .136 #8 3 .83 .26 .25 .71
RA18-10 100 22-16 .136 #10 2 .86 .31 .25 .71
RA873 1000 22-16 .136 #10 2 .86 .31 .25 .71
RA18-14 100 22-16 .136 1⁄4" 3 1.07 .46 .31 .84
RA713 1000 22-16 .136 1⁄4" 3 1.07 .46 .31 .84
RA18-516 100 22-16 .136 5⁄16" 3 1.07 .46 .31 .84
RA723 1000 22-16 .136 5⁄16" 3 1.07 .46 .31 .84
RA18-38 100 22-16 .136 3⁄8" 3 1.17 .53 .35 .87
RA733 1000 22-16 .136 3⁄8" 3 1.17 .53 .35 .87
RA18-12 100 22-16 .136 1⁄2" 3 1.27 .72 .50 .92
RA753 1000 22-16 .136 1⁄2" 3 1.27 .72 .50 .92
RB14-4 100 18-14 .162 #4 21⁄2.72 .26 .14 .59
RB1323 1000 18-14 .162 #4 21⁄2.72 .26 .14 .59
RB14-6 100 18-14 .162 #6 3 .89 .31 .25 .71
RB853 1000 18-14 .162 #6 3 .89 .31 .25 .71
RB1333 1000 18-14 .162 #6 3 .74 .26 .14 .59
RB14-8 100 18-14 .162 #8 3 .89 .31 .25 .71
RB863 1000 18-14 .162 #8 3 .89 .31 .25 .71
RB14-10 100 18-14 .162 #10 31⁄2.89 .31 .25 .71
RB873 1000 18-14 .162 #10 31⁄2.89 .31 .25 .71
RB14-14 100 18-14 .162 1⁄4"3
1⁄21.08 .47 .31 .81
RB713 1000 18-14 .162 1⁄4"3
1⁄21.08 .47 .31 .81
RB14-516 100 18-14 .162 5⁄16"3
1⁄21.08 .47 .31 .84
RB723 1000 18-14 .162 5⁄16"3
1⁄21.08 .47 .31 .84
RB14-38 100 18-14 .162 3⁄8"3
1⁄21.17 .53 .35 .87
RB733 1000 18-14 .162 3⁄8"3
1⁄21.17 .53 .35 .87
RB14-12 100 18-14 .162 1⁄2" 4 1.25 .72 .50 .90
RB753 1000 18-14 .162 1⁄2" 4 1.25 .72 .50 .90
RC10-6 50 12-10 .210 #6 3 1.00 .37 .27 .81
RC333 500 12-10 .210 #6 3 1.00 .37 .27 .81
RC10-8 50 12-10 .210 #8 5 1.00 .37 .27 .81
RC863 500 12-10 .210 #8 5 1.00 .37 .27 .81
RC10-10 50 12-10 .210 #10 5 1.00 .37 .27 .81
RC363 500 12-10 .210 #10 5 1.00 .37 .27 .81
RC10-14 50 12-10 .210 1⁄4" 6 1.12 .53 .32 .86
RC713 500 12-10 .210 1⁄4" 6 1.12 .53 .32 .86
RC10-516 50 12-10 .210 5⁄16" 6 1.21 .53 .31 .94
RC703 500 12-10 .210 5⁄16" 6 1.21 .53 .31 .94
RC10-38 50 12-10 .210 3⁄8" 6 1.27 .59 .35 .98
RC733 500 12-10 .210 3⁄8" 6 1.27 .59 .35 .98
RC10-12 50 12-10 .210 1⁄2" 6 1.37 .72 .52 1.02
RC753 500 12-10 .210 1⁄2" 6 1.37 .72 .52 1.02
* Not Listed By U.L. CSA
** CSA Listed only
U.L. Listed E9809
Installing tools: WT2000, WT112M, WT145C, WT1455, ERG-2001, ERG-2003, WT145A,
WT2130A (RC,RBC)
Installing tool: WT1452 (RZ series only)
Nylon Terminals
111
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
®
®
Self-insulated with high dieletric-strength nylon
sleeves, these ring terminals are recommended
for temperatures up to 105°C. An inner bronze
insulation grip sleeve lengthens the flexing
radius of the conductor and eliminates conduc-
tor creep. The nylon jacket is color-coded:
Color Code Wire Range
yellow 26-22
red 22-16
blue 18-14
yellow 12-10
Most standard bulk catalog numbers can
be put on Mylar Tape for reel fed applica-
tions (i.e. 12050 tool and application dies).
Please consult tech service.
Please put the suffix M for Mylar Tape
RA2573M.
(Bulk number 1000 and 500 packages.)
RZ & RAX stock thickness: .02
RA & RB stock thickness: .03
RC stock thickness: .04
Nylon Insulated Ring—Expanded Insulation Grip
Wt./Lbs.
Cat. Pkg. Wire Max. Bolt Per Dimensions
No. Qty. Range Ins. Hole 1000 A B C M
RB14-4X 100 18-14 .190 #4 4 .80 .26 .14 .67
RB1324 1000 18-14 .190 #4 4 .80 .26 .14 .67
RB14-6X 100 18-14 .190 #6 4 .95 .31 .25 .79
RB854 1000 18-14 .190 #6 4 .95 .31 .25 .79
RB14-8X 100 18-14 .190 #8 5 .95 .31 .25 .79
RB864 1000 18-14 .190 #8 5 .95 .31 .25 .79
RB14-10X 100 18-14 .190 #10 5 .95 .31 .25 .79
RB874 1000 18-14 .190 #10 5 .95 .31 .25 .79
RB14-14X 100 18-14 .190 1⁄4" 6 1.16 .47 .31 .92
RB714 1000 18-14 .190 1⁄4" 6 1.16 .47 .31 .92
RB14-516X 100 18-14 .190 5⁄16" 6 1.16 .47 .31 .92
RB724 1000 18-14 .190 5⁄16" 6 1.16 .47 .31 .92
RB14-38X 100 18-14 .190 3⁄8" 6 1.25 .53 .42 .95
RB734 1000 18-14 .190 3⁄8" 6 1.25 .53 .42 .95
RC10-6X 50 12-10 .250 #6 5 1.10 .37 .27 .91
RC334 500 12-10 .250 #6 5 1.10 .37 .27 .91
RC10-8X 50 12-10 .250 #8 5 1.10 .37 .27 .91
RC864 500 12-10 .250 #8 5 1.10 .37 .27 .91
RC10-10X 50 12-10 .250 #10 5 1.10 .37 .27 .91
RC364 500 12-10 .250 #10 5 1.10 .37 .27 .91
RC10-14X 50 12-10 .250 1⁄4" 6 1.22 .53 .32 .96
RC714 500 12-10 .250 1⁄4" 6 1.22 .53 .32 .96
RC10-516X 50 12-10 .250 5⁄16" 6 1.32 .53 .31 1.05
RC704 500 12-10 .250 5⁄16" 6 1.32 .53 .31 1.05
RC10-38X 50 12-10 .250 3⁄8" 6 1.38 .59 .35 1.09
RC734 500 12-10 .250 3⁄8" 6 1.38 .59 .35 1.09
RC10-12X 50 12-10 .250 1⁄2" 6 1.48 .72 .52 1.13
U.L. Listed E9809
Installing tools: WT2000, WT112M, WT145C, ERG-2001, ERG-2003, WT145A, WT1455,
WT2130A(RC)
Most standard bulk catalog numbers can be put on Mylar Tape for reel fed applications
(i.e. 12050 tool and application dies).
Please put the suffix M for Mylar Tape RA2573M. (Bulk number 1000 and 500 packages.)
Nylon Terminals
112
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
®
®
Catalog numbers with the suffix Xindicate an
expanded insulation grip. This means a wider
wire entry to accommodate heavy wall insula-
tion. Ring terminals won’t fall free even if the
mounting screw loosens.
RB stock thickness: .03
RC stock thickness: .04
Nylon Terminals
113
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Nylon Insulated Ring
Wt./Lbs.
Cat. Pkg. Wire Max. Bolt Per Dimensions
No. Qty. Range Ins. Hole 1000 A B C M
RD8-10 25 9-8-7 .340 #10 12 1.48 .42 .28 1.29
RD367 200 9-8-7 .340 #10 12 1.48 .42 .28 1.29
RD8-14 25 9-8-7 .340 1⁄4" 12 1.54 .46 .36 1.32
RD717 200 9-8-7 .340 1⁄4" 12 1.54 .46 .36 1.32
RD8-516 25 9-8-7 .340 5⁄16" 12 1.63 .57 .36 1.35
RD727 200 9-8-7 .340 5⁄16" 12 1.63 .57 .36 1.35
RD8-38 25 9-8-7 .340 3⁄8" 12 1.63 .57 .36 1.35
RD737 200 9-8-7 .340 3⁄8" 12 1.63 .57 .36 1.35
RD8-12 25 9-8-7 .310 1⁄2" 12 1.79 .82 .55 1.39
RD757* 200 9-8-7 .310 1⁄2" 12 1.79 .82 .55 1.39
RD10161 200 9-8-7AN .270 #8 12 1.40 .41 .24 1.20
RD10361 200 9-8-7AN .270 #10 12 1.40 .41 .24 1.20
RD10711 200 9-8-7AN .270 1⁄4" 12 1.45 .45 .27 1.22
RD10721 200 9-8-7AN .270 5⁄16" 12 1.53 .56 .34 1.25
RD10731 200 9-8-7AN .270 3⁄8" 12 1.53 .56 .34 1.25
RE6-10 20 6-5 .420 #10 16 1.65 .49 .28 1.40
RE267 200 6-5 .420 #10 16 1.65 .49 .28 1.40
RE6-14 20 6-5 .420 1⁄4" 16 1.65 .49 .28 1.40
RE717 200 6-5 .420 1⁄4" 16 1.65 .49 .28 1.40
RE6-516 20 6-5 .420 5⁄16" 16 1.76 .61 .34 1.47
RE727 200 6-5 .420 5⁄16" 16 1.76 .61 .34 1.47
RE6-38 20 6-5 .420 3⁄8" 16 1.76 .61 .34 1.47
RE737 200 6-5 .420 3⁄8" 16 1.76 .61 .34 1.47
RE6-12 20 6-5 .395 1⁄2" 16 1.83 .82 .55 1.43
RE757* 200 6-5 .395 1⁄2" 16 1.83 .82 .55 1.43
RE10261 200 6-5AN .315 #10 16 1.55 .49 .24 1.31
RE10711 200 6-5AN .315 1⁄4" 16 1.55 .49 .27 1.31
RE10721 200 6-5AN .315 5⁄16" 16 1.70 .60 .34 1.40
RE10731 200 6-5AN .315 3⁄8" 16 1.70 .60 .34 1.40
RF4-10 15 4-3 .510 #10 21 1.76 .56 .36 1.49
RF267 200 4-3 .510 #10 21 1.76 .56 .36 1.49
RF4-14 15 4-3 .510 1⁄4" 21 1.76 .56 .36 1.49
RF717 200 4-3 .510 1⁄4" 21 1.76 .56 .36 1.49
RF4-516 15 4-3 .510 5⁄16" 21 1.84 .62 .35 1.53
RF727 200 4-3 .510 5⁄16" 21 1.84 .62 .35 1.53
RF4-38 15 4-3 .510 3⁄8" 23 1.84 .62 .35 1.53
RF737 200 4-3 .510 3⁄8" 23 1.84 .62 .35 1.53
RF757* 200 4-3 .500 1⁄2" 23 1.90 .82 .55 1.49
RF10261 200 4-3AN .380 #10 26 1.78 .55 .30 1.51
RF10711 200 4-3AN .380 1⁄4" 26 1.78 .55 .30 1.51
RF10721 200 4-3AN .380 5⁄16" 26 1.80 .62 .34 1.49
RF10731 200 4-3AN .380 3⁄8" 26 1.80 .82 .34 1.49
RG2-10 10 2-1 .588 #10 42 2.15 .69 .40 1.83
RG267 100 2-1 .588 #10 42 2.15 .69 .40 1.83
RG2-14 10 2-1 .588 1⁄4" 42 2.15 .69 .40 1.83
RG717 100 2-1 .588 1⁄4" 42 2.15 .69 .40 1.83
RG2-516 10 2-1 .588 5⁄16" 42 2.15 .69 .40 1.83
RG727 100 2-1 .588 5⁄16" 42 2.15 .69 .40 1.83
RG2-38 10 2-1 .588 3⁄8" 42 2.15 .69 .40 1.83
RG737 100 2-1 .588 3⁄8" 42 2.15 .69 .40 1.83
RG2-12 10 2-1 .588 1⁄2" 42 2.35 .80 .49 1.93
RG757 100 2-1 .588 1⁄2" 42 2.35 .80 .49 1.93
RG9711 100 1AN 453 1⁄4" 48 2.07 .69 .40 1.74
RG9731 100 1AN .453 3⁄8" 48 2.07 .69 .40 1.74
RG9751 100 1AN .453 1⁄2" 48 2.26 .80 .49 1.84
AN—Aircraft Wire
U.L. Listed E9809
Installing tools: TBM6/TBM6S, WT2130A (RD Series only)
Note: Not available on Mylar Tape.
RD, RE, RF stock thickness: .04
RG stock thickness: .05
* Brazed Seam, Lolly-Pop Style Tongue
®
®
C
Nylon Insulated Ring—continued
Wt./Lbs.
Cat. Pkg. Wire Max. Bolt Per Dimensions
No. Qty. Range Ins. Hole 1000 A B C M
RH9711 100 1AN .500 1⁄4" 54 2.14 .77 .44 1.81
RH9731 100 1AN .500 3⁄8" 54 2.14 .77 .44 1.81
RH9751 100 1AN .500 1⁄2" 54 2.34 .77 .54 1.90
RJ9711 100 1/0AN .550 1⁄4" 80 2.35 .83 .46 1.97
RJ9731 100 1/0AN .550 3⁄8" 80 2.35 .83 .46 1.97
RJ9751 100 1/0AN .550 1⁄2" 80 2.49 .89 .55 2.04
RH717 100 1/0 .629 1⁄4" 80 2.14 .77 .43 1.81
RH727 100 1/0 .629 5⁄16" 80 2.14 .77 .43 1.81
RH737 100 1/0 .629 3⁄8" 80 2.14 .77 .43 1.81
RH757 100 1/0 .629 1⁄2" 80 2.34 .77 .54 1.90
RK9731 100 2/0AN .610 3⁄8" 70 2.52 .93 .55 2.14
RK9751 100 2/0AN .610 1⁄2" 70 2.60 .93 .55 2.15
RJ717 100 2/0 .675 1⁄4" 80 2.34 .83 .46 1.96
RJ727 100 2/0 .675 5⁄16" 80 2.34 .83 .46 1.96
RJ737 100 2/0 .675 3⁄8" 80 2.34 .83 .46 1.96
RJ757 100 2/0 .675 1⁄2" 80 2.48 .89 .54 2.03
RL9731 100 3/0AN .680 3⁄8" 120 2.83 1.04 .57 2.36
RL9751 100 3/0AN .680 1⁄2" 120 2.83 1.04 .57 2.36
RK717 100 3/0 .765 1⁄4" 84 2.60 .93 .54 2.21
RK727 100 3/0 .765 5⁄16" 84 2.60 .93 .54 2.21
RK737 100 3/0 .765 3⁄8" 84 2.60 .93 .54 2.21
RM9731 100 4/0AN .750 3⁄8" 160 3.00 1.13 .66 2.51
RM9751 100 4/0AN .750 1⁄2" 160 3.00 1.13 .66 2.51
RL737 100 4/0 .785 3⁄8" 130 2.83 1.04 .57 2.35
RL757 100 4/0 .785 1⁄2" 130 2.83 1.04 .57 2.35
RM737 100 250MCM .868 3⁄8" 130 3.00 1.13 .65 2.51
RM747 100 250MCM .868 7⁄16" 130 3.00 1.13 .65 2.51
RM757 100 250MCM .868 1⁄2" 130 3.00 1.13 .65 2.51
AN—Aircraft Wire
U.L. Listed E9809
Installing tools: TBM6/TBM6S, WT2130A (RD Series only)
Note: Not available on Mylar Tape.
Nylon Terminals
114
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
®
®
Stock Thickness:
RH = .05
RJ = .06
RK = .06
RL = .07
RM = .07
Terminals
115
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Heat Shrinkable Ring Terminals—Expanded Insulation Support
Wt./Lbs.
Cat. Pkg. Wire Max. Bolt Per Dimensions
No. Qty. Range Ins. Hole 1000 A B C M
RAS18-6X 100 22-18 .170 #6 2 1.23 .25 .27 1.10
RAS18-8X 100 22-18 .170 #8 3 1.26 .31 .27 1.10
RAS18-10X 100 22-18 .170 #10 2 1.26 .31 .27 1.10
RBS14-6X 100 16-14 .200 #6 3 1.23 .25 .27 1.10
RBS14-8X 100 16-14 .200 #8 3 1.23 .25 .27 1.10
RBS14-10X 100 16-14 .200 #10 31⁄21.26 .31 .27 1.10
RCS10-6X 50 12-10 .250 #6 3 1.34 .31 .27 1.15
RCS10-8X 50 12-10 .250 #8 5 1.34 .37 .27 1.15
RCS10-10X 50 12-10 .250 #10 5 1.34 .37 .27 1.15
RCS10-14X 50 12-10 .250 1⁄4" 6 1.34 .49 .32 1.15
U.L. Listed E9809
Installing tool: WT1255
Note: Not available on Mylar Tape.
®
®
These ring terminals are self-insulated with
heat shrinkable nylon and internally coated
sealant. Upon completed installation, a fully
sealed connection is achieved to protect the
joint against the degrading effects of galvanic
action, corrosion, and environmental exposure.
RAS & RBS stock thickness: .03
RCS stock thickness: .04
Vinyl Insulated Ring—Insulation Support
Wt./Lbs.
Cat. Pkg. Wire Max. Bolt Per Dimensions
No. Qty. Range Ins. Hole 1000 A B C M
18RA-4 100 22-16 .150 #4 3 .97 .31 .27 .81
RA77 1000 22-16 .150 #4 3 .97 .31 .27 .81
18RA-6 100 22-16 .150 #6 3 .94 .25 .27 .81
RA857 1000 22-16 .150 #6 3 .94 .25 .27 .81
18RA-8 100 22-16 .150 #8 3 .97 .31 .27 .81
RA867 1000 22-16 .150 #8 3 .97 .31 .27 .81
18RA-10 100 22-16 .150 #10 3 .97 .31 .27 .81
RA877 1000 22-16 .150 #10 3 .97 .31 .27 .81
18RA-14 100 22-16 .150 1⁄4" 4 1.13 .50 .37 .88
RA717 1000 22-16 .150 1⁄4" 4 1.13 .50 .37 .88
18RA-516 100 22-16 .150 5⁄16" 4 1.13 .50 .37 .88
RA727 1000 22-16 .150 5⁄16" 4 1.13 .50 .37 .88
18RA-38 100 22-16 .150 3⁄8" 4 1.24 .54 .37 .91
RA737 1000 22-16 .150 3⁄8" 4 1.24 .54 .37 .91
14RB-4 100 18-14 .170 #4 3 .94 .25 .27 .81
RB1327 1000 18-14 .170 #4 3 .94 .25 .27 .81
14RB-6 100 18-14 .170 #6 3 .97 .31 .27 .81
RB857 1000 18-14 .170 #6 3 .97 .31 .27 .81
14RB-8 100 18-14 .170 #8 3 .97 .31 .27 .81
RB867 1000 18-14 .170 #8 3 .97 .31 .27 .81
14RB-10 100 18-14 .170 #10 3 .97 .31 .27 .81
RB877 1000 18-14 .170 #10 3 .97 .31 .27 .81
14RB-14 100 18-14 .170 1⁄4" 4 1.14 .50 .38 .89
RB717 1000 18-14 .170 1⁄4" 4 1.14 .50 .38 .89
14RB-516 100 18-14 .170 5⁄16" 4 1.15 .50 .38 .89
RB727 1000 18-14 .170 5⁄16" 4 1.15 .50 .38 .89
14RB-38 100 18-14 .170 3⁄8" 4 1.16 .54 .38 .91
RB-737 1000 18-14 .170 3⁄8" 4 1.16 .54 .38 .91
10RC-6 50 12-10 .210 #6 5 1.06 .31 .27 .90
RC337 500 12-10 .210 #6 5 1.06 .31 .27 .90
10RC-8 50 12-10 .210 #8 5 1.06 .31 .27 .90
RC777 500 12-10 .210 #8 5 1.06 .31 .27 .90
10RC-10 50 12-10 .210 #10 5 1.06 .31 .27 .90
RC367 500 12-10 .210 #10 5 1.06 .31 .27 .90
10RC-14 50 12-10 .210 1⁄4" 6 1.16 .50 .27 .90
RC717 500 12-10 .210 1⁄4" 6 1.16 .50 .27 .90
10RC-516 50 12-10 .210 5⁄16" 6 1.17 .50 .37 .92
RC707 500 12-10 .210 5⁄16" 6 1.17 .50 .37 .92
10RC-38 50 12-10 .210 3⁄8" 6 1.29 .59 .44 .99
RC737 500 12-10 .210 3⁄8" 6 1.29 .59 .44 .99
U.L. Listed E9809
Installing tools: WT145C, WT2000, WT112M, ERG-2001, ERG-2003, WT1455, WT2130A (RC,
RBC)
Most standard bulk catalog numbers can be put on Mylar Tape for reel fed applications (i.e.
12050 tool and application dies).
Please put the suffix M for Mylar Tape RA2573M. (Bulk number 1000 and 500 packages.)
Vinyl Terminals
116
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
®
®
These ring terminals are self-insulated with a
PVC insulation sleeve of extra length to give
protection and relieve bending stress at wire’s
flex point. Brazed seam barrel is serrated to
obtain high pull-out value. Terminal is made of
high conductivity electrolytic copper, electro-tin
plated. Insulation material is color-coded:
Color Code Wire Range
red 22-16
blue 18-14
yellow 12-10
Stock Thickness:
RA & RB = .03
RC = .04
Vinyl Insulated Ring—Expanded Insulation Support
Wt./Lbs.
Cat. Pkg. Wire Max. Bolt Per Dimensions
No. Qty. Range Ins. Hole 1000 A B C M
18RA-6X 100 22-16 .170 #6 3 .97 .31 .27 .81
18RA-8X 100 22-16 .170 #8 3 .97 .31 .27 .81
RA867-170 1000 22-16 .170 #8 3 .97 .31 .27 .81
18RA-10X 100 22-16 .170 #10 3 .97 .31 .27 .81
RA877-170 1000 22-16 .170 #10 3 .97 .31 .27 .81
18RA-14X 100 22-16 .170 1⁄4" 4 1.13 .50 .37 .88
RA727-170 1000 22-16 .170 5⁄16" 4 1.13 .50 .37 .88
14RB-4X 100 18-14 .200 #4 3 .94 .25 .27 .81
14RB-6X 100 18-14 .200 #6 3 .97 .31 .27 .81
RB857-200 1000 18-14 .200 #6 3 .97 .31 .27 .81
14RB-8X 100 18-14 .200 #8 3 .97 .31 .27 .81
RB867-200 1000 18-14 .200 #8 3 .97 .31 .27 .81
14RB-10X 100 18-14 .200 #10 3 .97 .31 .27 .81
RB877-200 1000 18-14 .200 #10 3 .97 .31 .27 .81
14RB-14X 100 18-14 .200 1⁄4" 4 1.14 .50 .38 .89
RB717-200 1000 18-14 .200 1⁄4" 4 1.14 .50 .38 .89
14RB-516X 100 18-14 .200 5⁄16" 4 1.15 .50 .38 .89
14RB-38X 100 18-14 .200 3⁄8" 4 1.16 .54 .35 .91
10RC-6X 50 12-10 .250 #6 5 1.06 .31 .27 .90
RC337-250 500 12-10 .250 #6 5 1.06 .31 .27 .90
10RC-8X 50 12-10 .250 #8 5 1.06 .31 .27 .90
RC777-250 500 12-10 .250 #8 5 1.06 .31 .27 .90
10RC-10X 50 12-10 .250 #10 5 1.06 .31 .27 .90
RC367-250 500 12-10 .250 #10 5 1.06 .31 .27 .90
10RC-14X 50 12-10 .250 1⁄4" 6 1.16 .50 .27 .90
RC717-250 500 12-10 .250 1⁄4" 6 1.16 .50 .27 .90
10RC-516X 50 12-10 .250 5⁄16" 6 1.17 .50 .37 .92
10RC-38X 50 12-10 .250 3⁄8" 6 1.29 .59 .44 .99
RC737-250 500 12-10 .250 3⁄8" 6 1.29 .59 .44 .99
U.L. Listed E9809
Installing tools: WT145C, WT2000, WT112M, ERG-2001, ERG-2003, WT1455, WT2130A (RC,
RBC)
Most standard bulk catalog numbers can be put on Mylar Tape for reel fed applications
(i.e. 12050 tool and application dies).
Please put the suffix M for Mylar Tape RA2573M. (Bulk number 1000 and 500 packages.)
Catalog numbers with the suffix X indicate an
expanded insulation support. This means a
wider wire entry to accommodate heavy wall
insulation. Ring terminals won’t fall free even if
the mounting screw loosens.
Stock Thickness:
RA & RB = 03
RC = .04
Vinyl Terminals
117
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
®
®
U.L. 94V-0 Rated Ring Terminals
118
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Vinyl Insulated Ring
Max.
Cat. Stud Ins. Wire Dimensions
No. Size Dia. Range A B C M
Series RDV—Aircraft Wire AN
RDV10161 #8 .270 9,8,7 1.40 .41 .24 1.20
RDV10361 #10 .270 9,8,7 1.40 .41 .24 1.20
RDV10711 1⁄4" .270 9,8,7 1.45 .45 .27 1.22
RDV10721 5⁄16" .270 9,8,7 1.53 .56 .34 1.25
RDV10731 3⁄8" .270 9,8,7 1.53 .56 .34 1.25
Code Wire AWG
RDV167 #8 .340 9,8,7 1.48 .42 .28 1.29
RDV367 #10 .340 9,8,7 1.48 .42 .28 1.29
RDV717 1⁄4" .340 9,8,7 1.54 .46 .36 1.32
RDV727 5⁄16" .340 9,8,7 1.63 .57 .36 1.35
RDV737 3⁄8" .340 9,8,7 1.63 .57 .36 1.35
RDV757* 1⁄2" .310 9,8,7 1.79 .82 .55 1.39
Series REV—Aircraft Wire AN
REV10261 #10 .315 9,8,7 1.55 .45 .24 1.31
REV10711 1⁄4" .315 9,8,7 1.55 .49 .27 1.31
REV10721 5⁄16" .315 9,8,7 1.70 .60 .34 1.40
REV10731 3⁄8" .315 9,8,7 1.70 .60 .34 1.40
Code Wire AWG
REV267 #10 .420 9,8,7 1.65 .45 .28 1.40
REV717 1⁄4" .420 9,8,7 1.65 .49 .28 1.40
REV727 5⁄16" .420 9,8,7 1.76 .61 .34 1.47
REV737 3⁄8" .420 9,8,7 1.76 .61 .34 1.47
REV757* 1⁄2" .395 9,8,7 1.83 .82 .55 1.43
Note: Not available on Mylar Tape.
®
®
Stock Thickness: .04
NEW
RD and RE sizes now available with a U.L. 94V-O Vinyl Insulator
* Brazed Seam, Lolly-Pop Style Tongue
C
Tefzel®Insulated Terminals
119
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Tefzel Insulated Ring—Insulation Grip
Max.
Cat. Stud Ins. Wire Dimensions
No. Size Dia. Range A B C M
Series RAT—For U.L. 94V-O Flamability Rating/High Temperature and Chemical
Resistance.
RAT853 #6 .140 22-18 .81 .25 .25 .69
RAT863 #8 .140 22-18 .84 .31 .25 .69
RAT873 #10 .140 22-18 .84 .31 .25 .69
RAT713 1⁄4" .140 22-18 1.07 .46 .31 .84
Series RBT
RBT853 #6 .170 16-14 .84 .31 .25 .69
RBT863 #8 .170 16-14 .84 .31 .25 .69
RBT873 #10 .170 16-14 .84 .31 .25 .69
RBT713 1⁄4" .170 16-14 1.08 .46 .31 .81
Series RCT
RCT333 #6 .210 12-10 1.00 .37 .27 .81
RCT863 #8 .210 12-10 1.00 .37 .27 .81
RCT363 #10 .210 12-10 1.00 .37 .27 .81
RCT713 1⁄4" .210 12-10 1.11 .52 .32 .85
RCT703 5⁄16" .210 12-10 1.23 .52 .31 .96
RCT733** 3⁄8" .210 12-10 1.29 .58 .35 1.00
** Not available on tape.
U.L. Listed E9809
Most standard bulk catalog numbers can be put on Mylar Tape for reel fed applications (i.e.
12050 tool and application dies).
Please put the suffix M for Mylar Tape RA2573M. (Bulk number 1000 and 500 packages.)
®
®
Stock Thickness:
RAT & RBT = .03
RCT = .04
Package Quantities:
RAT & RBT = 1000 pcs.
RCT = 500 pcs.
Non-Insulated Terminals
120
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Non-Insulated Ring
Wt./Lbs.
Cat. Pkg. Wire Bolt Per Dimensions
No. Qty. Range Hole 1000 A B C M
A18-4 100 22-16 #4 2 .75 .31 .27 .59
A18-6 100 22-16 #6 2 .72 .25 .27 .59
A85 1000 22-16 #6 2 .72 .25 .27 .59
A18-8 100 22-16 #8 2 .75 .31 .27 .59
A86 1000 22-16 #8 2 .75 .31 .27 .59
A18-10 100 22-16 #10 2 .75 .31 .27 .59
A87 1000 22-16 #10 2 .75 .31 .27 .59
A18-14 100 22-16 1⁄4" 3 .92 .50 .37 .67
A71 1000 22-16 1⁄4" 3 .92 .50 .37 .67
A72 1000 22-16 5⁄16" 3 .92 .50 .37 .67
A73 1000 22-16 3⁄8" 3 .99 .54 .35 .67
A18-12 100 22-16 1⁄2" 3 1.06 .72 .38 .70
A75 1000 22-16 1⁄2" 3 1.06 .72 .38 .70
B14-4 100 18-14 #4 2 .72 .25 .27 .59
B132 1000 18-14 #4 2 .72 .25 .27 .59
B14-6 100 18-14 #6 2 .75 .31 .27 .59
B133 1000 18-14 #6 2 .75 .31 .27 .59
B14-8 100 18-14 #8 3 .75 .31 .27 .59
B86 1000 18-14 #8 3 .75 .31 .27 .59
B14-10 100 18-14 #10 3 .75 .31 .27 .59
B87 1000 18-14 #10 3 .75 .31 .27 .59
B14-14 100 18-14 1⁄4" 6 .93 .50 .38 .68
B71 1000 18-14 1⁄4" 6 .93 .50 .38 .68
B14-516 100 18-14 5⁄16" 6 .93 .50 .38 .68
B72 1000 18-14 5⁄16" 6 .93 .50 .38 .68
B14-38 100 18-14 3⁄8" 6 .96 .54 .35 .68
B73 1000 18-14 3⁄8" 6 .96 .54 .35 .68
B14-12 100 18-14 1⁄2" 6 1.06 .72 .38 .70
B75 1000 18-14 1⁄2" 6 1.06 .72 .38 .70
B85 1000 18-14 #6 6 .75 .31 .27 .59
B134 1000 18-14 #8 6 .72 .25 .27 .59
BC14-6 50 heavy duty 16-14 #6 4 .81 .25 .29 .68
BC85 500 use C tooling #6 4 .81 .25 .29 .68
BC14-8 50 heavy duty 16-14 #8 4 .87 .39 .29 .68
BC86 500 use C tooling #8 4 .87 .39 .29 .68
BC14-10 50 heavy duty 16-14 #10 5 .87 .39 .29 .68
BC87 500use C tooling #10 5 .87 .39 .29 .68
BC14-14 50 heavy duty 16-14 1⁄4"5 .93 .51 .29 .68
BC71 500 use C tooling 1⁄4"5 .93 .51 .29 .68
BC14-516 50 heavy duty 16-14 5⁄16"6 1.04 .54 .38 .77
BC72 500 use C tooling 5⁄16"6 1.04 .54 .38 .77
BC14-38 50 heavy duty 16-14 3⁄8"6 1.09 .63 .38 .77
BC79 500 use C tooling 3⁄8"6 1.09 .63 .38 .77
BC14-12 50 heavy duty 16-14 1⁄2"6 1.32 .76 .54 .94
BC75 500 use C tooling 1⁄2"6 1.32 .76 .54 .94
C10-6 50 12-10 #6 4 .82 .31 .27 .66
C33 500 12-10 #6 4 .82 .31 .27 .66
C10-8 50 12-10 #8 5 .82 .31 .27 .66
C77 500 12-10 #8 5 .82 .31 .27 .66
C10-10 50 12-10 #10 5 .85 .38 .27 .66
C26 500 12-10 #10 5 .85 .38 .27 .66
C36 1000 12-10 #10 7 .82 .31 .27 .66
C10-14 50 12-10 1⁄4" 7 .91 .50 .27 .66
C71 500 12-10 1⁄4" 7 .91 .50 .27 .66
C10-516 50 12-10 5⁄16" 8 .98 .50 .38 .73
C70 500 12-10 5⁄16" 8 .98 .50 .38 .73
C72 1000 12-10 5⁄16" 7 1.10 .59 .45 .80
C10-38 50 12-10 3⁄8" 7 1.10 .59 .45 .80
C73 500 12-10 3⁄8" 7 1.10 .59 .45 .80
C10-12 50 12-10 1⁄2" 7 1.21 .72 .38 .84
C75 500 12-10 1⁄2" 7 1.21 .72 .38 .84
U.L. Listed E9809
Installing tools: WT111M, WT112M, WT110M,
ERG-2002, WT1300, WT2000, WT3155A
®
®
These non-insulated ring terminals are made of
electrolytic copper for high conductivity. They
can be installed with crimping tools having a
single indentor or double indentor (recom-
mended for solid wire). Serrated barrel increas-
es grip on wire. Wire range identification is
stamped on the tongue of each terminal.
Most standard bulk catalog numbers can
be put on Mylar Tape for reel fed applica-
tions (i.e. 12050 tool and applicaton dies).
Consult tech service.
Please put the suffix M for Mylar Tape
RA2573M.
(Bulk number 1000 and 500 packages.)
Stock Thickness:
A & B = .03
BC = .05
C = .04
