2N5655, 2N5657 Plastic NPN Silicon High-Voltage Power Transistor These devices are designed for use in line-operated equipment such as audio output amplifiers; low-current, high-voltage converters; and AC line relays. 0.5 AMPERE POWER TRANSISTORS NPN SILICON 250-350 VOLTS, 20 WATTS Features * Excellent DC Current Gain - * * http://onsemi.com hFE = 30-250 @ IC = 100 mAdc Current-Gain - Bandwidth Product - fT = 10 MHz (Min) @ IC = 50 mAdc Pb-Free Packages are Available* IIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIII IIIIIIIIIII III III IIII II IIIIIIIIIII III III IIII II IIIIIIIIIII III III IIII II IIIIIIIIIII III IIIIII II III IIII IIIIIIIIIII III IIIIII II IIIIIIIIIII III IIIIII II IIIIIIIIIII IIIIII III II IIIIIIIIIII III IIIIII II IIIIIIIIIII III IIIIII II IIIIIIIIIII III IIIIII II IIIIIIIIIIIIIIIIIII II IIIIIIIIIII III IIIIII IIIIIIIIIIIIIIIIIII IIIIIIIIIII III IIIIII II IIIIIIIIIII III IIIIII II IIIIIIIIIII III IIIIII II IIIIIIIIIII III IIIIII II MAXIMUM RATINGS (Note 1) Rating Collector-Emitter Voltage Collector-Base Voltage Emitter-Base Voltage Symbol 2N5655 2N5657 Unit VCEO 250 350 Vdc VCB 275 375 Vdc VEB 6.0 Vdc IC 0.5 1.0 Adc Base Current IB 1.0 Adc Total Device Dissipation @ TC = 25C Derate above 25C PD 20 0.16 W W/C TJ, Tstg - 65 to + 150 C/W Symbol Max Unit qJC 6.25 C/W Collector Current - Continuous Peak Operating and Storage Junction Temperature Range TO-225AA CASE 77-09 STYLE 1 MARKING DIAGRAM YWW 2 N565xG THERMAL CHARACTERISTICS Characteristic Thermal Resistance, Junction-to-Case Y WW 2N565x Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. Indicates JEDEC registered data. G = Year = Work Week = Device Code x = 5 or 7 = Pb-Free Package ORDERING INFORMATION Device 2N5655 2N5655G 2N5657 2N5657G Package Shipping TO-225 500 Units / Bulk TO-225 (Pb-Free) 500 Units / Bulk TO-225 500 Units / Bulk TO-225 (Pb-Free) 500 Units / Bulk *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. (c) Semiconductor Components Industries, LLC, 2006 October, 2006 - Rev. 9 1 Publication Order Number: 2N5655/D 2N5655, 2N5657 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIII IIIIIIIIIIIIIIIIIIIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII III IIII III IIIII IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII IIIIIII III IIIIIIIIIIIIIIIIIIIIII III IIII III IIIII IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII III IIII III IIIII IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III ELECTRICAL CHARACTERISTICS (TC = 25_C unless otherwise noted) (Note 2) Characteristic Symbol Min Max Unit OFF CHARACTERISTICS Collector-Emitter Sustaining Voltage (IC = 100 mAdc (inductive), L = 50 mH) 2N5655 2N5657 VCEO(sus) 250 350 - - Vdc Collector-Emitter Breakdown Voltage (IC = 1.0 mAdc, IB = 0) 2N5655 2N5657 V(BR)CEO 250 350 - - Vdc Collector Cutoff Current (VCE = 150 Vdc, IB = 0) (VCE = 250 Vdc, IB = 0) 2N5655 2N5657 - - 0.1 0.1 Collector Cutoff Current (VCE = 250 Vdc, VEB(off) = 1.5 Vdc) (VCE = 350 Vdc, VEB(off) = 1.5 Vdc) (VCE = 150 Vdc, VEB(off) = 1.5 Vdc, TC = 100_C) (VCE = 250 Vdc, VEB(off) = 1.5 Vdc, TC = 100_C) 2N5655 2N5657 2N5655 2N5657 - - - - 0.1 0.1 1.0 1.0 Collector Cutoff Current (VCB = 275 Vdc, IE = 0) (VCB = 375 Vdc, IE = 0) 2N5655 2N5657 - - 10 10 - 10 25 30 15 5.0 - 250 - - - - - 1.0 2.5 10 VBE - 1.0 Vdc fT 10 - MHz Output Capacitance (VCB = 10 Vdc, IE = 0, f = 100 kHz) Cob - 25 pF Small-Signal Current Gain (IC = 100 mAdc, VCE = 10 Vdc, f = 1.0 kHz) hfe 20 - - ICEO mAdc ICEX mAdc mAdc ICBO Emitter Cutoff Current (VEB = 6.0 Vdc, IC = 0) IEBO mAdc ON CHARACTERISTICS DC Current Gain (Note 3) (IC = 50 mAdc, VCE = 10 Vdc) (IC = 100 mAdc, VCE = 10 Vdc) (IC = 250 mAdc, VCE = 10 Vdc) (IC = 500 mAdc, VCE = 10 Vdc) hFE Collector-Emitter Saturation Voltage (Note 3) (IC = 100 mAdc, IB = 10 mAdc) (IC = 250 mAdc, IB = 25 mAdc) (IC = 500 mAdc, IB = 100 mAdc) - VCE(sat) Base-Emitter Voltage (IC = 100 mAdc, VCE = 10 Vdc) (Note 3) Vdc DYNAMIC CHARACTERISTICS Current-Gain - Bandwidth Product (IC = 50 mAdc, VCE = 10 Vdc, f = 10 MHz) (Note 4) Indicates JEDEC registered data for 2N5655 Series. Pulse Test: Pulse Width v 300 ms, Duty Cycle v 2.0%. fT is defined as the frequency at which |hfe| extrapolates to unity. 40 PD, POWER DISSIPATION (WATTS) 2. 3. 4. 30 50 mH X 20 200 TO SCOPE Hg RELAY + 10 25 50 V Y 300 0 + 6.0 V 50 75 100 TC, CASE TEMPERATURE (C) 125 - 1.0 150 Figure 1. Power Derating Figure 2. Sustaining Voltage Test Circuit Safe Area Limits are indicated by Figures 3 and 4. Both limits are applicable and must be observed. http://onsemi.com 2 2N5655, 2N5657 1.0 There are two limitations on the power handling ability of a transistor: average junction temperature and second breakdown. Safe operating area curves indicate I C - V CE limits of the transistor that must be observed for reliable operation; i.e., the transistor must not be subjected to greater dissipation than the curves indicate. The data of Figure 3 is based on T J(pk) = 150_C; TC is variable depending on conditions. Second breakdown pulse limits are valid for duty cycles to 10% provided T J(pk) v 150_C. At high case temperatures, thermal limitations will reduce the power that can be handled to values less than the limitations imposed by second breakdown. IC, COLLECTOR CURRENT (AMP) 10 ms 0.5 500 ms TJ = 150C 0.2 1.0 ms dc Second Breakdown Limit Thermal Limit @ TC = 25C Bonding Wire Limit Curves apply below rated VCEO 2N5655 0.1 0.05 0.02 0.01 2N5657 20 30 40 60 100 200 300 400 VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS) 600 Figure 3. Active-Region Safe Operating Area 300 100 70 VCE = 10 V VCE = 2.0 V TJ = +150C +100C 50 + 25C 30 20 10 1.0 -55 C 2.0 3.0 5.0 7.0 10 20 30 50 IC, COLLECTOR CURRENT (mA) 70 100 Figure 4. Current Gain 1.0 0.8 V, VOLTAGE (VOLTS) hFE , DC CURRENT GAIN 200 VBE(sat) @ IC/IB = 10 VBE @ VCE = 10 V 0.6 0.4 VCE(sat) @ IC/IB = 10 0.2 TJ = + 25C IC/IB = 5.0 0 10 20 30 50 100 200 300 IC, COLLECTOR CURRENT (mA) Figure 5. "On" Voltages http://onsemi.com 3 500 200 300 500 2N5655, 2N5657 300 TJ = + 25C 200 C, CAPACITANCE (pF) Cib 100 70 50 30 20 10 0.1 Cob 0.2 0.5 1.0 2.0 5.0 10 20 VR, REVERSE VOLTAGE (VOLTS) 50 100 Figure 6. Capacitance 10 IC/IB = 10 VCC = 300 V, VBE(off) = 2.0 V (2N5657, only) VCC = 100 V, VBE(off) = 0 V tr 5.0 2.0 t, TIME (s) 1.0 0.5 0.2 td 0.1 0.05 0.02 0.01 1.0 2.0 5.0 10 20 50 100 IC, COLLECTOR CURRENT (mA) 200 500 Figure 7. Turn-On Time 10 IC/IB = 10 t, TIME (s) 5.0 ts 2.0 tf 1.0 VCC = 100 V 0.5 VCC = 300 V (Type 2N5657, only) 0.2 0.1 1.0 2.0 5.0 10 20 50 100 IC, COLLECTOR CURRENT (mA) Figure 8. Turn-Off Time http://onsemi.com 4 200 500 2N5655, 2N5657 PACKAGE DIMENSIONS TO-225 CASE 77-09 ISSUE Z -B- U F Q -A- NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 077-01 THRU -08 OBSOLETE, NEW STANDARD 077-09. C M 1 2 3 H DIM A B C D F G H J K M Q R S U V K J V G S R 0.25 (0.010) A M M B M D 2 PL 0.25 (0.010) M A M B M INCHES MIN MAX 0.425 0.435 0.295 0.305 0.095 0.105 0.020 0.026 0.115 0.130 0.094 BSC 0.050 0.095 0.015 0.025 0.575 0.655 5_ TYP 0.148 0.158 0.045 0.065 0.025 0.035 0.145 0.155 0.040 --- MILLIMETERS MIN MAX 10.80 11.04 7.50 7.74 2.42 2.66 0.51 0.66 2.93 3.30 2.39 BSC 1.27 2.41 0.39 0.63 14.61 16.63 5 _ TYP 3.76 4.01 1.15 1.65 0.64 0.88 3.69 3.93 1.02 --- STYLE 1: PIN 1. EMITTER 2. COLLECTOR 3. BASE ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 http://onsemi.com 5 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative 2N5655/D