SLLS171G - OCTOBER 1993 - REVISED MARCH2009 D Meets or Exceeds the EIA Standards D D D D D D D D, DW, OR N PACKAGE (TOP VIEW) RS-422-A, RS-423-A, RS-485, and CCITT Recommendation V.11 Designed to Operate With Pulse Durations as Short as 20 ns Designed for Multipoint Transmission on Long Bus Lines in Noisy Environments Input Sensitivity . . . 200 mV Low-Power Consumption . . . 20 mA Max Open-Circuit Fail-Safe Design Common-Mode Input Voltage Range of -7 V to 12 V Pin Compatible With SN75175 and LTC489 1B 1A 1Y 1,2EN 2Y 2A 2B GND 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 VCC 4B 4A 4Y 3,4EN 3Y 3A 3B description The SN65LBC175 and SN75LBC175 are monolithic, quadruple, differential line receivers with 3-state outputs designed to meet the requirements of the EIA standards RS-422-A, RS-423-A, RS-485, and CCITT Recommendation V.11. The devices are optimized for balanced multipoint bus transmission at data rates up to and exceeding 10 million bits per second. The receivers are enabled in pairs, with an active-high enable input. Each differential receiver input features high impedance, hysteresis for increased noise immunity, and sensitivity of 200 mV over a common-mode input voltage range of 12 V to -7 V. The fail-safe design ensures that when the inputs are open-circuited, the outputs are always high. Both devices are designed using the TI proprietary LinBiCMOStechnology allowing low power consumption, high switching speeds, and robustness. These devices offer optimum performance when used with the SN75LBC172 or SN75LBC174 quadruple line drivers. The SN65LBC175 is available in the 16-pin DIP (N), small-outline package (D), and the wide small-outline package (DW). The SN75LBC175 is available in the 16-pin DIP (N) and the small-outline package (D). The SN65LBC175 is characterized over the industrial temperature range of -40C to 85C. The SN75LBC175 is characterized for operation over the commercial temperature range of 0C to 70C. AVAILABLE OPTIONS TEMPERATURE RANGE PACKAGE 0C to 70C -40C to 85C SN75LBC175D SN65LBC175D Wide SOIC SN65LBC175DW PDIP SN75LBC175N SN65LBC175N SOIC Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. LinBiCMOS is a trademark of Texas Instruments. Copyright 2009 Texas Instruments Incorporated ! " #$%! " &$'(#! )!%* )$#!" # ! "&%##!" &% !+% !%" %," "!$%!" "!)) -!.* )$#! &#%""/ )%" ! %#%""(. #($)% !%"!/ (( &%!%"* POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 SLLS171G - OCTOBER 1993 - REVISED MARCH2009 logic symbol 1,2EN 1A 1B 2A 2B 4 logic diagram (positive logic) EN 1,2EN 2 3 1 1A 1Y 1B 6 5 7 2Y 2A 2B 3,4EN 12 EN 3,4EN 3A 3B 4A 4B 10 11 9 3Y 3A 14 13 15 3B 4Y 4A This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. 4B 4 2 1 6 7 3 5 1Y 2Y 12 10 9 14 15 11 13 3Y 4Y FUNCTION TABLE (each receiver) DIFFERENTIAL INPUTS A -B ENABLE OUTPUT Y VID 0.2 V -0.2 V < VID < 0.2 V H H H ? VID - 0.2 V X H L L Z Open circuit H H H = high level, L = low level, X = irrelevant, Z = high impedance (off), ? = indeterminate schematics of inputs and outputs EQUIVALENT OF A AND B INPUTS TYPICAL OF ALL OUTPUTS VCC VCC 100 k (A Only) VCC 3 k Input Receiver Input 18 k 100 k (B Only) TYPICAL OF EN INPUT Y Output 12 k 1 k 2 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 Output SLLS171G - OCTOBER 1993 - REVISED MARCH2009 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage range, VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 V to 7 V Input voltage, VI (A or B inputs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 V Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 V Voltage range at Y, 1/2EN, 3/4EN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 V to VCC + 0.5 V Continuous total dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table Operating free-air temperature range, TA: SN65LBC175 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40C to 85C SN75LBC175 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0C to 70C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65C to 150C Electrostatic Discharge (ESD): Human Body Model (HBM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 kV Machine Model (MM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 V Charged Device Model (CDM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5 kV Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values are with respect to GND. 2. Differential input voltage is measured at the noninverting input with respect to the corresponding inverting input. DISSIPATION RATING TABLE PACKAGE TA 25C POWER RATING DERATING FACTOR ABOVE TA = 25C TA = 70C POWER RATING TA = 85C POWER RATING D 1100 mW 8.7 mW/C 709 mW 578 mW DW 1200 mW 9.6 mW/C 770 mW 625 mW N 1150 mW 9.2 mW/C 736 mW 598 mW recommended operating conditions Supply voltage, VCC Common-mode input voltage, VIC MIN NOM MAX UNIT 4.75 5 5.25 V 12 V 6 V -7 Differential input voltage, VID High-level input voltage, VIH Low-level input voltage, VIL 2 EN inputs V 0.8 V High-level output current, IOH -8 mA Low-level output current, IOL 8 mA Operating free-air temperature, TA SN65LBC175 -40 85 SN75LBC175 0 70 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 C 3 SLLS171G - OCTOBER 1993 - REVISED MARCH2009 electrical characteristics over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted) PARAMETER TEST CONDITIONS VIT + VIT - Positive-going input threshold voltage Vhys VIK Hysteresis voltage ( VIT + - VIT - ) VOH VOL High-level output voltage IOZ High-impedance-state output current Negative-going input threshold voltage Enable input clamp voltage Low-level output voltage II Bus input current A or B inputs IIH IIL High-level enable input current IOS Short-circuit output current ICC Supply current Low-level enable input current IO = - 8 mA IO = 8 mA MIN TYP MAX 0.2 -0.2 VID = - 200 mV, VO = 0 V to VCC -0.9 IOH = - 8 mA IOL = 8 mA 3.5 mV -1.5 4.5 0.3 V V 20 A VCC = 5 V, VCC = 0 V, Other inputs at 0 V 0.7 1 Other inputs at 0 V 0.8 1 VIH = - 7 V, VIH = - 7 V, VCC = 5 V, VCC = 0 V, Other inputs at 0 V -0.5 -0.8 Other inputs at 0 V -0.4 -0.8 20 VIH = 5 V VIL = 0 V -80 IO = 0, VID = 5 V Outputs disabled V 0.5 VIH = 12 V, VIH = 12 V, VO = 0 Outputs enabled, V V 45 II = - 18 mA VID = 200 mV, UNIT mA A -20 A -120 mA 11 20 0.9 1.4 mA All typical values are at VCC = 5 V and TA = 25C. switching characteristics, VCC = 5 V, CL = 15 pF, TA = 25C PARAMETER TEST CONDITIONS MIN TYP MAX 11 22 30 ns 11 22 30 ns UNIT tPHL tPLH Propagation delay time, high- to low-level output Propagation delay time, low- to high-level output VID = - 1.5 V to 1.5 V, See Figure 1 tPZH tPZL Output enable time to high level See Figure 2 17 30 ns Output enable time to low level See Figure 3 18 30 ns tPHZ tPLZ Output disable time from high level See Figure 2 30 40 ns Output disable time from low level See Figure 3 23 30 ns tsk(p) tt Pulse skew (|tPHL - tPLH|) See Figure 2 4 6 ns Transition time See Figure 1 3 10 ns 4 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 SLLS171G - OCTOBER 1993 - REVISED MARCH2009 PARAMETER MEASUREMENT INFORMATION 1.5 V Generator (see Note A) Input 0V 0V -1.5 V 50 Output tPLH CL = 15 pF (see Note B) tPHL VOH 90% Output 1.3 V 10% 1.3 V VOL tt 2V TEST CIRCUIT tt VOLTAGE WAVEFORMS Figure 1. tPLH and tPHL Test Circuit and Voltage Waveforms VCC Output 2 k S1 1.5 V Input CL = 15 pF (see Note B) 5 k 3V 1.3 V 1.3 V 0V tPHZ tPZH See Note C Generator (see Note A) Output S1 Open 50 0.5 V 1.3 V 0V VOH S1 Closed 1.4 V VOLTAGE WAVEFORMS TEST CIRCUIT NOTES: A. The input pulse is supplied by a generator having the following characteristics: PRR = 1 MHz, duty cycle = 50%, tr 6 ns, tf 6 ns, ZO = 50 . B. CL includes probe and jig capacitance. C. All diodes are 1N916 or equivalent. Figure 2. tPHZ and tPZH Test Circuit and Voltage Waveforms POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 5 SLLS171G - OCTOBER 1993 - REVISED MARCH2009 PARAMETER MEASUREMENT INFORMATION VCC Output 2 k 1.5 V 3V Input CL = 15 pF (see Note B) 1.3 V 1.3 V 0V 5 k See Note C tPZL Generator (see Note A) tPLZ S2 Open Output 50 S2 Closed 1.4 V 1.3 V VOL S2 0.5 V VOLTAGE WAVEFORMS TEST CIRCUIT NOTES: A. The input pulse is supplied by a generator having the following characteristics: PRR = 1 MHz, duty cycle = 50%, tr 6 ns, tf 6 ns, ZO = 50 . B. CL includes probe and jig capacitance. C. All diodes are 1N916 or equivalent. Figure 3. tPZL and tPLZ Test Circuit and Voltage Waveforms TYPICAL CHARACTERISTICS HIGH-LEVEL OUTPUT VOLTAGE vs HIGH-LEVEL OUTPUT CURRENT OUTPUT VOLTAGE vs DIFFERENTIAL INPUT VOLTAGE 5.5 4.5 VIC = 12 V VIC = 0 V VIC = 12 V 2 VIC = 0 V 2.5 VIC = - 7 V 3 1.5 1 0.5 0 0 10 20 30 40 50 60 70 80 90 100 VOH - High-Level Output Voltage - V 3.5 VIC = - 7 V VO - Output Voltage - V 5 VCC = 5 V TA = 25C 4 4 VCC = 5 V 3.5 VCC = 4.75 V 3 2.5 2 1.5 1 0.5 VID = 0.2 V TA = 25C 0 0 -4 -8 -12 -16 -20 -24 -28 -32 -36 -40 IOH - High-Level Output Current - mA VID - Differential Input Voltage - mV Figure 4 6 VCC = 5.25 V 4.5 Figure 5 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 SLLS171G - OCTOBER 1993 - REVISED MARCH2009 TYPICAL CHARACTERISTICS LOW-LEVEL OUTPUT VOLTAGE vs LOW-LEVEL OUTPUT CURRENT AVERAGE SUPPLY CURRENT vs FREQUENCY 660 540 I CC - Average Supply Current - mA 600 VOL - Low-Level Output Voltage - mV 14 TA = 25C VCC = 5 V VID = 200 mV 480 420 360 300 240 180 120 TA = 25C VCC = 5 V 12 10 8 6 4 2 60 0 0 3 6 9 12 15 18 21 24 27 0 10k 30 100k IOL - Low-Level Output Current - mA 1M Figure 6 I I - Input Current - mA 0.6 0.4 0.2 0 -0.2 -0.4 -0.6 -0.8 IIIIIIIIIIIII IIIIIIIIIIIII IIIIIIIIIIIII IIIIIIIIIIIII IIIIIIIIIIIII IIIIIIIIIIIII IIIIIIIIIIIII IIIIIIIIIIIII IIIIIIIIIIIII IIIIIIIIIIIII IIIIIIIIIIIII IIIIIIIIIIIII IIIIIIIIIIIII IIIIIIIIIIIII -1 -8 PROPAGATION DELAY TIME vs FREE-AIR TEMPERATURE 24.5 TA = 25C VCC = 5 V The shaded region of this graph represents more than 1 unit load per RS-485. -6 -4 -2 0 2 4 6 8 10 12 t pd - Propagation Delay Time - ns 0.8 100M Figure 7 INPUT CURRENT vs INPUT VOLTAGE (COMPLEMENTARY INPUT AT 0 V) 1 10M f - Frequency - Hz VCC = 5 V CL = 15 pF VIO = 1.5 V 24 tPHL 23.5 23 tPLH 22.5 22 -40 -20 0 20 40 60 80 100 TA - Free-Air Temperature - C VI - Input Voltage - V Figure 9 Figure 8 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 7 PACKAGE OPTION ADDENDUM www.ti.com 17-Mar-2009 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty SN65LBC175D ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN65LBC175DG4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN65LBC175DR ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN65LBC175DRG4 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN65LBC175DW ACTIVE SOIC DW 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN65LBC175DWG4 ACTIVE SOIC DW 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN65LBC175DWR ACTIVE SOIC DW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN65LBC175DWRG4 ACTIVE SOIC DW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN65LBC175N ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type SN65LBC175NE4 ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type SN75LBC175D ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN75LBC175DG4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN75LBC175DR ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN75LBC175DRG4 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN75LBC175N ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type SN75LBC175NE4 ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type Lead/Ball Finish MSL Peak Temp (3) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) Addendum-Page 1 PACKAGE OPTION ADDENDUM www.ti.com 17-Mar-2009 (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF SN75LBC175 : * Military: SN55LBC175 NOTE: Qualified Version Definitions: * Military - QML certified for Military and Defense Applications Addendum-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SN65LBC175DR SOIC SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) D 16 2500 330.0 16.4 B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 6.5 10.3 2.1 8.0 16.0 Q1 SN65LBC175DR SOIC D 16 2500 330.0 16.4 6.5 10.3 2.1 8.0 16.0 Q1 SN65LBC175DWR SOIC DW 16 2000 330.0 16.4 10.75 10.7 2.7 12.0 16.0 Q1 SN75LBC175DR SOIC D 16 2500 330.0 16.4 6.5 10.3 2.1 8.0 16.0 Q1 SN75LBC175DR SOIC D 16 2500 330.0 16.4 6.5 10.3 2.1 8.0 16.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN65LBC175DR SOIC D 16 2500 333.2 345.9 28.6 SN65LBC175DR SOIC D 16 2500 367.0 367.0 38.0 SN65LBC175DWR SOIC DW 16 2000 367.0 367.0 38.0 SN75LBC175DR SOIC D 16 2500 333.2 345.9 28.6 SN75LBC175DR SOIC D 16 2500 367.0 367.0 38.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated