SURFACE MOUNT 5.0 Watt ZENER DIODES
WWW.Microsemi .COM
SCOTTSDALE DIVISION
SMBG5333 thru SMBG5388B, e3
SMBJ5333 thru SMBJ5388B, e3
SMBG(J)533–5388B, e3
DESCRIPTION APPEARANCE
The SMBJ5333-5388B or SMBG5333-5388B series of surface mount 5.0
watt Zeners provides voltage regulation in a selection from 3.3 to 200 volts
with different tolerances as identified by suffix letter on the part number. It is
equivalent to the JEDEC registered 1N5333 thru 1N5388B with identical
electrical characteristics and testing as well as RoHS Compliant with an e3
suffix. It is available in J-bend design (SMBJ) with the DO-214AA package
for greater PC board mounting density or in Gull-wing design (SMBG) in the
DO-215AA for visible solder connections. These plastic encapsulated
Zeners have a moisture classification of Level 1 with no dry pack required
and are also available in military equivalent screening levels by adding a
prefix identifier as further described in the Features section. Microsemi also
offers numerous other Zener products to meet higher and lower power
applications.
NOTE: All SMB series are
equivalent to prior SMS package
identifications.
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
APPLIC ATIONS / BENEFITS
Surface mount equivalent to 1N5333 to 1N5388B
Ideal for high-density and low-profile mounting
Zener voltage available 3.3V to 200V
Standard voltage tolerances are plus/minus 5% with
B suffix and 10 % with A suffix identification
Tight tolerances available in plus or minus 2% or 1%
with C or D suffix respectively
Options for screening in accordance with MIL-PRF-19500
for JAN, JANTX, and JANTXV are available by adding
MQ, MX, or MV prefixes respectively to part numbers.
RoHS compliant devices available by adding an “e3” suffix
Regulates voltage over a broad operating
current and temperature range
Wide selection from 3.3 to 200 V
Nonsensitive to ESD
Withstands high surge stresses
Minimal changes of voltage versus current as
specified by voltage regulation (ΔVZ)
High specified maximum current (IZM) when
adequately heat sinking
Moisture classification is Level 1 with no dry
pack required per IPC/JEDEC J-STD-020B
MAXIMUM RAT ING S
MECHANICAL AND PACKAGING
Power dissipation at 25ºC: 5.0 watts (also see
derating in Figure 1).
Operating and Storage temperature: -65ºC to
+150ºC
Thermal Resistan ce: 25 ºC/W junctio n to lead, or
90ºC/W junction to ambient when mo unted on FR4
PC board (1oz Cu) with recommended fo otprint (see
last page)
Steady-State Power: 5 watts at TL < 25oC, or 1.38
watts at TA = 25ºC when mounted on FR4 PC board
with recommended footpri nt (also see Figure 1)
Forward voltage @1.0 A: 1.2 volts (maximum)
Solder Temperatures: 260 ºC for 10 s (maximum)
CASE: Void-free transfer molded thermosetting
epoxy body meeting UL94V-0
TERMINALS: Gull-wing or C-bend (m odified J-
bend) tin-lead or RoHS compliant annealed
matte-Tin plating solderable per MIL -STD-750,
method 2026
POLARITY: Cathode indicated by band. Diode
to be operated with the banded end positive
with respect to the opposite end.
MARKING: Part number without SMBx prefix
(e.g. 5333B, 5333Be3, MX5348C, 5376 D, etc.)
TAPE & REEL option: Standard per EIA-481-1-
A with 12 mm tape, 750 per 7 inch reel or 2500
per 13 inch reel (add “TR” suffix to part numbe r)
WEIGHT: 0.1 grams
See package dimensions on last page
Microsemi
Scottsdale Division Page 1
Copyright © 2007
6-21-2007 REV E 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
SURFACE MOUNT 5.0 Watt ZENER DIODES
WWW.Microsemi .COM
SCOTTSDALE DIVISION
SMBG5333 thru SMBG5388B, e3
SMBJ5333 thru SMBJ5388B, e3
SMBG(J)533–5388B, e3
ELECTRICAL CHARACTERI STICS @ TL = 30oC
TYPE NUMBER REGULATOR
VOLTAGE
(VZ)
TEST
CURRENT
(IZ)
MAXIMUM
DYNAMIC
IMPEDANCE
(ZZ)
(A&B Suffix)
MAXIMUM
REVERSE
CURRENT
(IR)
IR TEST
VOLTAGE
(VR)
(Non-Suffix &
A Suffix)
IR TEST
VOLTAGE
(VR)
(B,C,D Suffix)
MAXIMUM
REGULATOR
CURRENT
(IZM)
(B,C,D Suffix)
MAXIMUM
DYNAMIC KNEE
IMPEDANCE
ZZK AT 1.0Ma
(A,B,C,D Suffix)
MAXIMUM
SURGE
CURRENT
(IZSM)
MAXIMUM
VOLTAGE
REGULATION
(ΔVZ)
(A,B,C,D
Suffix)
GULL-
WING
LEAD
C-BEND
(MOD.
“J”) V mA dc OHMS μA V V mA OHMS AMPS VOLTS
SMBG5333B
SMBG5334B
SMBG5335B
SMBG5336B
SMBG5337B
SMBJ5333B
SMBJ5334B
SMBJ5335B
SMBJ5336B
SMBJ5337B
3.3
3.6
3.9
4.3
4.7
380
350
320
290
260
3.0
2.5
2.0
2.0
2.0
300
150
50
10
5.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1440
1320
1220
1100
1010
400
500
500
500
450
20
18.7
17.6
16.4
15.3
0.85
0.80
0.54
0.49
0.44
SMBG5338B
SMBG5339B
SMBG5340B
SMBG5341B
SMBG5342B
SMBJ5338B
SMBJ5339B
SMBJ5340B
SMBJ5341B
SMBJ5342B
5.1
5.6
6.0
6.2
6.8
240
220
200
200
175
1.5
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
10
1.0
2.0
3.0
3.0
4.9
1.0
2.0
3.0
3.0
5.2
930
865
790
765
700
400
400
300
200
200
14.4
13.4
12.7
12.4
11.5
0.39
0.25
0.19
0.10
0.15
SMBG5343B
SMBG5344B
SMBG5345B
SMBG5346B
SMBG5347B
SMBJ5343B
SMBJ5344B
SMBJ5345B
SMBJ5346B
SMBJ5347B
7.5
8.2
8.7
9.1
10
175
150
150
150
125
1.5
1.5
2.0
2.0
2.0
10
10
10
7.5
5.0
5.4
5.9
6.25
6.6
7.2
5.7
6.2
6.6
6.9
7.6
630
580
545
520
475
200
200
200
150
125
10.7
10
9.5
9.2
8.6
0.15
0.20
0.20
0.22
0.22
SMBG5348B
SMBG5349B
SMBG5350B
SMBG5351B
SMBG5352B
SMBJ5348B
SMBJ5349B
SMBJ5350B
SMBJ5351B
SMBJ5352B
11
12
13
14
15
125
100
100
100
75
2.5
2.5
2.5
2.5
2.5
5.0
2.0
1.0
1.0
1.0
8.0
8.6
9.4
10.1
10.8
8.4
9.1
9.9
10.6
11.5
430
395
365
340
315
125
125
100
75
75
8.0
7.5
7.0
6.7
6.3
0.25
0.25
0.25
0.25
0.25
SMBG5353B
SMBG5354B
SMBG5355B
SMBG5356B
SMBG5357B
SMBJ5353B
SMBJ5354B
SMBJ5355B
SMBJ5356B
SMBJ5357B
16
17
18
19
20
75
70
65
65
65
2.5
2.5
2.5
3.0
3.0
1.0
0.5
0.5
0.5
0.5
11.5
12.2
13
13.7
14.4
12.2
12.9
13.7
14.4
15.2
295
280
264
250
237
75
75
75
75
75
6.0
5.8
5.5
5.3
5.1
0.30
0.35
0.40
0.40
0.40
SMBG5358B
SMBG5359B
SMBG5360B
SMBG5361B
SMBG5362B
SMBJ5358B
SMBJ5359B
SMBJ5360B
SMBJ5361B
SMBJ5362B
22
24
25
27
28
50
50
50
50
50
3.5
3.5
4.0
5.0
6.0
0.5
0.5
0.5
0.5
0.5
15.8
17.3
18
19.4
20.1
16.7
18.2
19
20.6
21.2
216
198
190
176
170
75
100
110
120
130
4.7
4.4
4.3
4.1
3.9
0.45
0.55
0.55
0.60
0.60
SMBG5363B
SMBG5364B
SMBG5365B
SMBG5366B
SMBG5367B
SMBJ5363B
SMBJ5364B
SMBJ5365B
SMBJ5366B
SMBJ5367B
30
33
36
39
43
40
40
30
30
30
8.0
10
11
14
20
0.5
0.5
0.5
0.5
0.5
21.6
23.8
25.9
28.1
31
22.8
25.1
27.4
29.7
32.7
158
144
132
122
110
140
150
160
170
190
3.7
3.5
3.3
3.1
2.8
0.60
0.60
0.65
0.65
0.70
SMBG5368B
SMBG5369B
SMBG5370B
SMBG5371B
SMBG5372B
SMBJ5368B
SMBJ5369B
SMBJ5370B
SMBJ5371B
SMBJ5372B
47
51
56
60
62
25
25
20
20
20
25
27
35
40
42
0.5
0.5
0.5
0.5
0.5
33.8
36.7
40.3
43
44.6
35.8
38.8
42.6
45.5
47.1
100
93
86
79
76
210
230
280
350
400
2.7
2.5
2.3
2.2
2.1
0.80
0.90
1.00
1.20
1.35
SMBG5373B
SMBG5374B
SMBG5375B
SMBG5376B
SMBG5377B
SMBJ5373B
SMBJ5374B
SMBJ5375B
SMBJ5376B
SMBJ5377B
68
75
82
87
91
20
20
15
15
15
44
45
65
75
75
0.5
0.5
0.5
0.5
0.5
49
54
59
63
65.5
51.7
56
62.2
66
69.2
70
63
58
54.5
52.5
500
620
720
760
760
2.0
1.9
1.8
1.7
1.6
1.50
1.60
1.80
2.00
2.20
SMBG5378B
SMBG5379B
SMBG5380B
SMBG5381B
SMBG5382B
SMBJ5378B
SMBJ5379B
SMBJ5380B
SMBJ5381B
SMBJ5382B
100
110
120
130
140
12
12
10
10
8.0
90
125
170
190
230
0.5
0.5
0.5
0.5
0.5
72
79.2
86.4
93.6
101
76
83.6
91.2
98.8
106
47.5
43
39.5
36.6
34
800
1000
1150
1250
1500
1.5
1.4
1.3
1.2
1.2
2.30
2.50
2.50
2.50
2.50
SMBG5383B
SMBG5384B
SMBG5385B
SMBG5386B
SMBG5387B
SMBG5388B
SMBJ5383B
SMBJ5384B
SMBJ5385B
SMBJ5386B
SMBJ5387B
SMBJ5388B
150
160
170
180
190
200
8.0
8.0
8.0
5.0
5.0
5.0
330
350
380
430
450
480
0.5
0.5
0.5
0.5
0.5
0.5
108
115
122
130
137
144
114
122
129
137
144
152
31.6
29.4
28
26.4
25
23.6
1500
1650
1750
1750
1850
1850
1.1
1.1
1.0
1.0
0.9
0.9
3.00
3.00
3.00
4.00
5.00
5.00
NOTE 1: Devices listed above with B suffix have ±5% tolerance, A suffix designates ±10% tolerance, C suffix designates ±2%
tolerance, and D designates ±1% toler ance.
NOTE 2: Zener voltage (Vz) is measured at TL = 25oC (+8, -2oC). Voltage measurement to be performed 40 ±10 mi lliseconds
after application of dc current.
NOTE 3: The zener impedance is derived from 1 kHz ac voltag e resulting from an ac current modulation having an rms value
equal to 10% of the dc zener current (IZT or IZK) superimposed on IZT or IZK. See Micro Note 202 for zener imped ance
variation with different operating currents.
NOTE 4: The maximum current (IZM) shown is for a ±5% tolerance devices. The IZM for other tolerances can be calculated using
the formula: IZM = P/VZM whe re V ZM is the VZ at the high end of the voltage tolerance specified and P is the rated po wer
for the method of mounting.
NOTE 5: The surge current (IZSM) is specified as the maximum peak of a non-recurrent half-sine wave of 8.3 ms duration.
NOTE 6: Voltage regulation (VZ) is the difference between the voltage measured at 10% and 50% of IZM.
Microsemi
Scottsdale Division Page 2
Copyright © 2007
6-21-2007 REV E 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
SURFACE MOUNT 5.0 Watt ZENER DIODES
WWW.Microsemi .COM
SCOTTSDALE DIVISION
SMBG5333 thru SMBG5388B, e3
SMBJ5333 thru SMBJ5388B, e3
SMBG(J)533–5388B, e3
GRAPHS
SMB5335
SMB5344
SMB5342
SMB5338
Pd, Maximum Power Dissipation (mW)
TL
TA on FR4
PC board
Temperature (oC)
FIGURE 1 – Power Derating Curve FIGURE 2 – Capacitance vs. Zener Voltage
Microsemi
Scottsdale Division Page 3
Copyright © 2007
6-21-2007 REV E
PACKAGE DIMENSIO NS & PAD LAYOU T
SMBJ SMBG
A B C D E F K L
MIN .077 .160 .130 .205 .077 .235 .015 .030
MAX .083 .180 .155 .220 .104 .255 .030 .060
DIMENSIONS IN MILLIMETERS
MIN 1.96 4.06 3.30 5.21 1.95 5.97 .381 .760
MAX 2.10 4.57 3.94 5.59 2.65 6.48 .762 1.520
INCHES mm
A 0.320 8.13
B 0.085 2.16
C 0.110 2.79
INCHES mm
A .260 6.60
B .085 2.16
C .110 2.79
SMBG
SMBJ
SMB5350
SMB5357
SMB5365
SMB5378
SMB5388
FIGURE 3
Typical Capacitance vs.
Reverse Voltage for 5 Watt Zeners
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
4/25/12 SMBJ5359Be3/TR13 | Microsemi
1/1www.microsemi.com/en/products/product-directory/313298
Overview Docs & Specs Diagrams Buy & Sample
Division
ROHS
Products Applications Design Support Company Careers Investors Survey
Privacy Policy Terms & Conditions Site map PPG Extranet Login PPG Webex Portal
Copyright © 2011 Microsemi Corporation. All rights reserved. T he Endwave logo is a registered trademark of Endwave Corporati on.
Home › Products › Product Directory Discrete Pow er And Small Signal Products › Zeners › Zener Voltage Regulator Diode
SMBJ5359Be3/TR13
(#313298)
Zener Voltage Regulator Diode
Description :
The SMBJ5333-5388B or SMBG5333-5388B series of surface mount 5.0 watt Zeners provides voltage
regulation in a selection from 3.3 to 200 volts with different tolerances as identified by suffix letter on the
part number. It is equivalent to the JEDEC registered 1N5333 thru 1N5388B with identical electrical
characteristics and testing as well as RoHS Compliant with an e3 suffix. It is available in J-bend design
(SMBJ) with the DO-214AA package for greater PC board mounting density or in Gull-wing design (SMBG)
in the DO-215AA for visible solder connections. These plastic encapsulated Zeners have a moisture
classification of Level 1 with no dry pack required and are also available in military equivalent screening
levels by adding a prefix identifier as further described in the Features section. Microsemi also offers
numerous other Zener products to meet higher and lower power applications.
Microsemi Commercial Busines s Unit