Features
Compliant with AEC-Q200 Rev-C- Stress
Test Qualifi cation for Passive Components
in Automotive Applications
Surface Mount Devices
Fully compatible with current
industry standards
Packaged per EIA 481-2 standard
RoHS compliant* and halogen free**
Agency recognition:
Patents pending
MF-SM Series - PTC Resettable Fuses
*RoHS Directive 2002/95/EC Jan 27, 2003 including Annex.
**To be considered halogen free, each homogenous material can have a maximum concentration of 900 ppm of either bromine or chlorine.
Specifi cations are subject to change without notice.
Customers should verify actual device performance in their specifi c applications.
*RoHS COMPLIANT
& AEC APPROVED
Electrical Characteristics
Model V max.
Volts
I max
Amps
Ihold Itrip Resistance Max. Time
To Tr i p
Tripped
Power
Dissipation
Amperes
at 23 °C
Ohms
at 23 °C
Amperes
at 23 °C
Seconds
at 23 °C
Watts
at 23 °C
Hold Trip R Min. R1 Max. Max. Typ.
MF-SM030 60 40 0.30 0.60 0.90 4.80 1.5 3.0 1.7
MF-SM050 60 40 0.50 1.00 0.35 1.40 2.5 4.0 1.7
MF-SM075 30 80 0.75 1.50 0.23 1.00 8.0 0.3 1.7
MF-SM075/60* 60 10 0.75 1.50 0.23 1.00 8.0 0.3 1.7
MF-SM100 30 80 1.10 2.20 0.12 0.48 8.0 0.5 1.7
MF-SM100/33 33 40 1.10 2.20 0.12 0.41 8.0 0.5 1.7
MF-SM125 15 100 1.25 2.50 0.07 0.25 8.0 2.0 1.7
MF-SM150 15 100 1.50 3.00 0.06 0.25 8.0 5.0 1.9
MF-SM150/33 33 40 1.50 3.00 0.06 0.23 8.0 5.0 1.9
MF-SM185/33 33 40 1.80 3.60 0.04 0.15 8.0 5.0 1.9
MF-SM200 15 100 2.00 4.00 0.045 0.125 8.0 12.0 1.9
MF-SM250 15 100 2.50 5.00 0.024 0.085 8.0 25.0 1.9
MF-SM260 6 100 2.60 5.20 0.025 0.075 8.0 20.0 1.7
MF-SM300** 6 100 3.00 6.00 0.015 0.048 8.0 35.0 1.5
Environmental Characteristics
Operating Temperature .............................................. -40 °C to +85 °C
Maximum Device Surface Temperature
in Tripped State ......................................................... 125 °C
Passive Aging ............................................................ +85 °C, 1000 hours ................................................... ±5 % typical resistance change
Humidity Aging .......................................................... +85 °C, 85 % R.H. 7 days ......................................... ±5 % typical resistance change
Thermal Shock .......................................................... MIL-STD-202F, Method 107G, .................................. ±10 % typical resistance change
+125 °C to -55 °C,10 cycles
Vibration .................................................................... MIL-STD-883C, Method 2007.1, Condition A ........... No change
Test Procedures And Requirements For Model MF-SM Series
Test Test Conditions Accept/Reject Criteria
Visual/Mech. .............................................................. Verify dimensions and materials ................................ Per MF physical description
Resistance ................................................................. In still air @ 23 °C....................................................... Rmin R R1max
Time to Trip ................................................................ At specifi ed current, Vmax, 23 °C ............................. T max. time to trip (seconds)
Hold Current .............................................................. 30 min. at Ihold .......................................................... No trip
Trip Cycle Life ............................................................ Vmax, Imax, 100 cycles ............................................. No arcing or burning
Trip Endurance .......................................................... Vmax, 48 hours ......................................................... No arcing or burning
Solderability ............................................................... MIL-STD-202F, Method 208F .................................... 95 % min. coverage
UL File Number ............... E174545 http://www.ul.com/ Follow link to Certifi cations, then UL File No., enter E174545
CSA File Number ............. CA110338 http://directories.csa-international.org/ Under “Certifi cation Record” and “File Number” enter 110338-0-000
TÜV Certifi cate Number .. R 02057213 http://www.tuvdotcom.com/ Follow link to “other certifi cates”, enter File No. 2057213
Thermal Derating Chart - Ihold (Amps)
Model Ambient Operating Temperature
-40 ºC -20 ºC 0 ºC 23 ºC 40 ºC 50 ºC 60 ºC 70 ºC 85 ºC
MF-SM030 0.45 0.40 0.35 0.30 0.25 0.23 0.20 0.17 0.14
MF-SM050 0.76 0.67 0.59 0.50 0.42 0.38 0.33 0.29 0.23
MF-SM075 1.11 0.99 0.84 0.75 0.63 0.57 0.49 0.45 0.36
MF-SM075/60 1.11 0.99 0.84 0.75 0.63 0.57 0.49 0.45 0.36
MF-SM100 1.66 1.47 1.29 1.10 0.91 0.83 0.73 0.64 0.50
MF-SM100/33 1.66 1.47 1.29 1.10 0.91 0.83 0.73 0.64 0.50
MF-SM125 1.89 1.68 1.46 1.25 1.04 0.94 0.83 0.73 0.56
MF-SM150 2.27 2.01 1.76 1.50 1.25 1.13 0.99 0.87 0.68
MF-SM150/33 2.27 2.01 1.76 1.50 1.25 1.13 0.99 0.87 0.68
MF-SM185/33 2.56 2.32 2.08 1.85 1.60 1.44 1.28 1.12 0.88
MF-SM200 3.02 2.68 2.34 2.00 1.66 1.50 1.32 1.16 0.90
MF-SM250 3.78 3.35 2.93 2.50 2.08 1.88 1.65 1.45 1.13
MF-SM260 3.64 3.25 2.91 2.60 2.26 2.08 1.95 1.74 1.48
MF-SM300 4.13 3.75 3.30 2.87 2.62 2.43 2.25 2.00 1.78
*CSA recognition pending. **UL approved, CSA & TUV approval pending.
Itrip is approximately two times Ihold.
Specifi cations are subject to change without notice.
Customers should verify actual device performance in their specifi c applications.
MF-SM Series - PTC Resettable Fuses
Product Dimensions
Applications
Almost anywhere there is a low voltage power
supply and a load to be protected, including:
Computers & peripherals
General electronics
Automotive applications
A B C D E F G H
Model
Min. Max. Max. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min.
MF-SM030 6.73 7.98 3.18 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43
(0.265) (0.314) (0.125) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017)
MF-SM050 6.73 7.98 3.18 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43
(0.265) (0.314) (0.125) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017)
MF-SM075 6.73 7.98 3.18 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43
(0.265) (0.314) (0.125) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017)
MF-SM075/60 6.73 7.98 3.18 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43
(0.265) (0.314) (0.125) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017)
MF-SM100 6.73 7.98 3.0 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43
(0.265) (0.314) (0.118) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017)
MF-SM100/33 6.73 7.98 3.0 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43
(0.265) (0.314) (0.118) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017)
MF-SM125 6.73 7.98 3.0 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43
(0.265) (0.314) (0.118) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017)
MF-SM150 8.00 9.50 3.0 6.71 0.56 0.71 0.56 0.71 3.68 3.94 0.66 1.37 0.43
(0.315) (0.374) (0.118) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017)
MF-SM150/33 8.00 9.50 3.0 6.71 0.56 0.71 0.56 0.71 3.68 3.94 0.66 1.37 0.43
(0.315) (0.374) (0.118) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017)
MF-SM185/33 8.00 9.50 3.0 6.71 0.56 0.71 0.56 0.71 3.68 3.94 0.66 1.37 0.43
(0.315) (0.374) (0.118) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017)
MF-SM200 8.00 9.50 3.0 6.71 0.56 0.71 0.56 0.71 3.68 3.94 0.66 1.37 0.43
(0.315) (0.374) (0.118) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017)
MF-SM250 8.00 9.50 3.0 6.71 0.56 0.71 0.56 0.71 3.68 3.94 0.66 1.37 0.43
(0.315) (0.374) (0.118) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017)
MF-SM260 6.73 7.98 3.0 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43
(0.265) (0.314) (0.118) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017)
MF-SM300 6.73 7.98 3.0 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43
(0.265) (0.314) (0.118) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017)
Packaging:
TAPE & REEL: MF-SM030, 050, 075, 075/60, 100, 100/33, 125, 260, 300 = 2000 pcs. per reel;
MF-SM150, 150/33, 185/33, 200, 250 = 1500 pcs. per reel.
A
D
H
E
Side View
B
F
C
End View
G
DIMENSIONS: MM
(INCHES)
Terminal material:
Tin-plated brass
2.3 ± 0.1
(0.09 ± 0.004)
9.7 ± 0.1
(0.38 ± 0.004)
3.1 ± 0.1
(0.12 ± 0.004)
3.1 ± 0.1
(0.12 ± 0.004)
R
ecommended Pad Layout
M
F-SM030, 050, 075, 075/60, 100, 100/33, 125, 260, 30
0
10.7 ± 0.1
(0.42 ± 0.004)
4.6 ± 0.1
(0.18 ± 0.004)
2.3 ± 0.1
(0.09 ± 0.004)
4.6 ± 0.1
(0.18 ± 0.004)
R
ecommended Pad Layout
M
F-SM150, 150/33, 185/33, 200, 250
How to Order
MF - SM 100/33 - 2 - 99
Multifuse® Product
Designator
Series
SM = Surface Mount Component
Hold Current, Ihold/Vmax*
030 - 300 (0.3 - 3.0 Amps)
Packaging Options
- 2 = Tape and Reel**
Part Number Suffi x Option
- 99 = As of date code April 1, 2005 all
MF-SM models are RoHS compli-
ant. The suffi x “-99” can be used if
a new part number is required to
reference the RoHS compliance.
Examples:
MF-SM030-2 .............Tape and reel
packaging
MF-SM030-2-99 ........Tape and reel
packaging with
part number
suffi x option
MF-SM150-2 .............Tape and reel
packaging
MF-SM150/33-2-99 ..Tape and reel
packaging with
part number
suffi x option
* Vmax entry applies only to models
MF-SM075/60, MF-SM100/33, MF-SM150/33
& MF-SM185/33.
** Packaged per EIA-481-2
Specifi cations are subject to change without notice.
Customers should verify actual device performance in their specifi c applications.
MF-SM Series - PTC Resettable Fuses
Typical Time to Trip at 23 °C
100
1
10
0.1
0.01
0.001
0.1 1 10 100
Fault Current (Amps)
Time to Trip (Seconds)
MF-SM200
MF-SM030
MF-SM050
MF-SM075, MF-SM075/60
MF-SM100, MF-SM100/33
MF-SM185/33
MF-SM125
MF-SM150, MF-SM150/33
MF-SM250
MF-SM300
MF-SM260
Typical Part Marking
Represents total content. Layout may vary.
MANUFACTURER'S
TRADEMARK
PART IDENTIFICATION
030
0A DATE CODE -
WEEK 1 OF 2000 = 0A
(YEAR & WEEK)
WEEK 27 OF 2000 = A0
(WEEK & YEAR)
Solder Refl ow Recommendations
160–220
300
250
200
150
100
50
0
10–20
Temperature (°C)
120
Preheating Soldering Cooling
Time (seconds)
Solder refl ow
• Recommended refl ow methods: IR, vapor phase oven, hot air oven.
Devices are not designed to be wave soldered to the bottom side of the
board.
Gluing the devices is not recommended.
Recommended maximum paste thickness is 0.25 mm (.010 inch).
Devices can be cleaned using standard industry methods and solvents.
Note:
• If refl ow temperatures exceed the recommended profi le, devices may not
meet the performance requirements.
Rework
A device should not be reworked.
Storage Recommendations
The recommended long term storage conditions for Multifuse® Polymer PTC devices are 40 °C maximum and 70 % RH maximum. All devices
should remain in the original sealed packaging prior to use. Devices may not conform with data sheet specifi cations if these storage
recommendations are exceeded. Devices stored in this manner have an indefi nite shelf life.
MF-SM SERIES, REV. P, 11/10
MF-SM030, 050, 075, 100, 125, 260, 300; MF-SM150, 200, 250;
MF-SM075/60; MF-SM-100/33 MF-SM-150/33, MF-SM-185/33;
Tape Dimensions per EIA-481-2 MF-SM013/250 per EIA 481-2
W 16.0 ± 0.3 16.0 ± 0.3
(0.630 ± 0.012) (0.630 ± 0.012)
P0 4.0 ± 0.1 4.0 ± 0.1
(0.157 ± 0.004) (0.157 ± 0.004)
P1 8.0 ± 0.1 12.0 ± 0.1
(0.315 ± 0.004) (0.472 ± 0.004)
P2 2.0 ± 0.1 2.0 ± 0.1
(0.079 ± 0.004) (0.079 ± 0.004)
A0 5.7 ± 0.1 6.9 ± 0.1
(0.224 ± 0.004) (0.272 ± 0.004)
B0 8.1 ± 0.1 9.6 ± 0.1
(0.319 ± 0.004) (0.378 ± 0.004)
B1 max. 12.1 12.1
(0.476) (0.476)
D0 1.5 + 0.1/-0.0 1.5 + 0.1/-0.0
(0.059 + 0.004/-0) (0.059 + 0.004/-0)
F 7.5 ± 0.1 7.5 ± 0.1
(0.295 + 0.004) (0.295 + 0.004)
E1 1.75 ± 0.1 1.75 ± 0.1
(0.069 ± 0.004) (0.069 ± 0.004)
E2 min. 14.25 14.25
(0.561) (0.561)
T max. 0.6 0.6
(0.024) (0.024)
T1 max. 0.1 0.1
(0.004) (0.004)
K0 3.4 ± 0.1 3.4 ± 0.1*
(0.134 ± 0.004) (0.134 ± 0.004)*
Leader min. 390 390
(15.35) (15.35)
Trailer min. 160 160
(6.30) (6.30)
Reel Dimensions
A max. 360 360
(14.17) (14.17)
N min. 50 50
(1.97) (1.97)
W1 16.4 + 2.0/ -0.0 16.4 + 2.0/ -0.0
(0.646 + 0.079/-0) (0.646 + 0.079/-0)
W2 max. 22.4 22.4
(0.882) (0.882)
* Model MF-SM013/250 = 3.8 ± 0.1
(0.150 ± 0.004)
MF-SM, MF-SM/33, MF-SM/60 & MF-SM/250 Series Tape and Reel Specifi cations
Specifi cations are subject to change without notice.
Customers should verify actual device performance in their specifi c applications.
DIMENSIONS: MM
(INCHES)
B1
N(HUB DIA.)
(MEASURED
AT HUB)
A
T
COVER
TAPE
K0
T1A0
W2
(MEASURED
AT HUB)
W
1
P1
B0
F
D0P2
P
0
E2
E1
W
NOTE: Effective December 1, 2010 (product date code V0), the cover tape will be changed to the new 3M Universal Cover Tape (UCT).