REV. 6/3/05 2 1 DATE REV ECN APP'D. BY 1/30/06 | a2 | 7455 M ( 708 (1798) ) BOTTOM SURFACE OF JACK (PCB SURFACE) j00 [254](3) ( .148 [3.76] ) 50 [127 050 [1.27] (7) ig /--.635 [16.13] MAX. TO HIGHEST POINT [ 8s, OF BEAM 9.035 ee 89] +.003 [0.08] (8) 2 N p\_I"\ | | Zz PN ft 16 a 9.065 os Heel t 65] +. ~ [0.08] a | s | = 3 = 2 /#- ~ TT a mo => 4 = STEWART iB SS, & 5 125 [5.18] (2) 8 PATENTED ~~ mot oS * 128 ms I = ~ 2 8 080 [2.03] N | cS) Gn ~- 7 450 [11.43] = 610 [15.49] 1 ae [11.43] STITT ip Ge est oe iF 3 2 te Og Op | tM \=/ . [10.79] _ TYP. ( .083 [2.12] ) 4 TO HIGHEST POINT OF BEAM _| 545 [13.84] .040 [1.02] (2) id [8 [16.68] hs (r.o7] (4) R.010 [0.25] _t SUGGESTED PANEL OPENING MAX. L 000 [0.00] TOP OF PCB TO BOTTOM OF OPENING a) ) j P.C.B. RECOMMENDED HOLE LAYOUT SEEN FROM COMPONENT SIDE ALL CENTERLINE DIMENSIONS ARE BASIC. 0 lo! 275 [6.99] MAX. NOTES: 1. . FOR PRODUCT SPECIFICATIONS SEE PRO22-01. . TOLERANCES COMPLY WITH F.C.C. DIMENSION REQUIREMENTS. . THE SUGGESTED PANEL OPENING IS INTENDED TO GIVE CONNECTOR MATERIALS: HOUSING: THERMOPLASTIC UL94 V0 CONTACTS/SHIELD: COPPER ALLOY SHIELD PLATING: NICKEL OR TIN CONTACT PLATING: SELECTIVE GOLD IN CONTACT AREA SEE CHART FOR PART NUMBER USER THE ABILITY TO HAVE REASONABLE JACK/PANEL CLEARANCES, YET MAINTAIN GROUNDING CAPABILITY. THESE VARIABLES CAN BE ADJUSTED IN EITHER DIRECTION BUT MAY CARRY SOME CONSEQUENCES IN THE FORM OF LOWER MATING FORCES OR TIGHTER ASSEMBLY TOLERANCES. 50 MICRO-INCHES [1.27um] SS-6488SA-PG64BA-50-A490 CONTACT PLATING IN MATING AREA PART NUMBER THIRD ANGLE PROJECTION @ = Bel Stewart Connector 11118 Susquehanna Trail South Glen Rock, PA 17327-9199 (717) 235-7512 Fax: (717) 235-7954 http: //www.stewartconnector.com DO NOT SCALE DRAWING DRAWING IS SUBJECT TO CHANGE WITHOUT NOTICE EIGHT CONTACT, EIGHT POSITION, SHIELDED JACK ENHANCED SHIELD, .180 LEAD LENGTH DIMENSIONS: INCHES [METRIC] UNLESS OTHERWISE SPECIFIED TOLERANCES ARE +.005 [0.13] ANGLES ARE + 1 SHEET NO. { OF 1 THIS DRAWING AND THE SUBJECT MATTER SHOWN THEREON ARE CONFIDENTIAL AND THE PROPRIETARY PROPERTY OF BEL STEWART CONNECTOR AND SHALL NOT BE REPRODUCED, COPIED, OR USED IN ANY MANNER WITHOUT PRIOR WRITTEN CONSENT OF BEL STEWART CONNECTOR. THE SUBJECT MATTER MAY BE PATENTED OR A PATENT MAY BE PENDING. me" IRM | 3-27-03 wee RCC | 3-27-03 me 07640331 |" AD 1 AutoCAD