RIGOL TECHNOLOGIES, INC.
DG4000
Function/Arbitrary Waveform Generator
Maximum output frequency: 200MHz, 160MHz, 100MHz, 60MHz
500MSa/s sample rate, 14 bit vertical resolution
Dual channel outputs with identical performance
2ppm high-frequency stability
-115dBc/Hz low phase noise
Versatile analog and digital modulation functions
150 built-in waveforms
7digits/s, 200MHz built-in Counter
Harmonic generator that can generate up to 16th order of harmonic (Std.)
Powerful waveform editing PC software
Connectivity: USB Host & Device, LAN
7 inch LCD display (800 × 480)
DG4000 series is a multifunctional generator that combines many functions in one, including Function
Generator, Arbitrary Waveform Generator, Pulse Generator, Harmonic Generator, Analog/Digital Modulator
and Counter. All the models have two channels with complete equivalent functions and precisely adjustable
phases.
Series
Product Dimensions: Width × Height × Depth = 313mm × 160.7mm × 116.7mm Weight: 3.2kg (Without Package)
Product Overview
Function Interfaces
Two channels with complete equivalent functions
and precisely adjustable phases (standard)
Abundant analog and digital modulation functions
Noise and burst modes
Standard high resolution counter function
Standard arbitrary waveform function and 150
built-in arbitrary waveforms
Various sweep modes
Up to 16 orders customized harmonic generation
function
Statistic analysis function of counter
Specifications
All the specications can be guaranteed if the following two conditions are met unless where noted.
● The generator is within the calibration period and has performed self-calibration.
● The generator has been working continuously for at least 30 minutes under the specied temperature (18℃ to 28℃).
All the specications are guaranteed unless those marked with “typical”.
Model DG4202 DG4162 DG4102 DG4062
Number of Channels 2 2 2 2
Maximum Frequency 200MHz 160MHz 100MHz 60MHz
Sample Rate 500MSa/s
Waveforms
Standard Waveform Sine, Square, Ramp, Pulse, Noise, Harmonics
Arbitrary Waveform 150 kinds, including Sinc, Exponential Rise, Exponential Fall, ECG, Gauss, HaverSine, Lorentz,
Dual-Tone, DC, etc.
Frequency Characteristics
Sine 1μHz to 200MHz 1μHz to 160MHz 1μHz to 100MHz 1μHz to 60MHz
Square 1μHz to 60MHz 1μHz to 50MHz 1μHz to 40MHz 1μHz to 25MHz
Ramp 1μHz to 5MHz 1μHz to 4MHz 1μHz to 3MHz 1μHz to 1MHz
Pulse 1μHz to 50MHz 1μHz to 40MHz 1μHz to 25MHz 1μHz to 15MHz
Harmonic 1μHz to 100MHz 1μHz to 80MHz 1μHz to 50MHz 1μHz to 30MHz
Noise (-3dB) 120MHz bandwidth 120MHz bandwidth 80MHz bandwidth 60MHz bandwidth
Arbitrary Waveform 1μHz to 50MHz 1μHz to 40MHz 1μHz to 25MHz 1μHz to 15MHz
Resolution 1μHz
Accuracy ±2ppm, 18℃ to 28℃
Sine Wave Spectrum Purity
Harmonic Distortion
Typical (0dBm)
DC to 1MHz: <-60dBc
1MHz to 10MHz: <-55dBc
10MHz to 100MHz: <-50dBc
100MHz to 200MHz: <-40dBc
Total Harmonic Distortion <0.1% (10Hz to 20kHz, 0dBm)
Spurious (non-harmonic)
Typical (0dBm)
≤10MHz: <-65dBc
>10MHz: <-65dBc + 6dB/octave
Phase Noise Typical (0dBm, 10kHz deviation)
10MHz: ≤-115dBc/Hz
Signal Characteristics
Square
Rise/Fall Time Typical (1Vpp)
<8ns
Typical (1Vpp)
<10ns
Typical (1Vpp)
<12ns
Overshoot Typical (100kHz, 1Vpp)
<3%
Duty Cycle
≤10MHz: 20.0% to 80.0%
10MHz to 40MHz: 40.0% to 60.0%
>40MHz: 50.0% (xed)
Non-symmetry 1% of period + 5ns
Jitter (rms)
Typical (1MHz, 1Vpp, 50Ω)
≤5MHz: 2ppm + 500ps
>5MHz: 500ps
Ramp
Linearity ≤1% of peak output (Typical, 1kHz, 1VPP, 100% Symmetry)
Symmetry 0% to 100%
Pulse
Period 25ns to 1000000s 40ns to 1000000s 66.7ns to 1000000s
Pulse Width ≥10ns ≥12ns ≥18ns
Leading/Trailing Edge Time ≥5ns ≥7ns ≥11ns
Overshoot Typical (1Vpp)
<3%
Jitter (rms)
Typical (1Vpp)
≤5MHz: 2ppm + 500ps
>5MHz: 500ps
Arb
Waveform Length 16k points
Vertical Resolution 14bits
Sample Rate 500MSa/s
Minimum Rise/Fall Time Typical (1Vpp)
<5ns
Jitter (rms)
Typical (1Vpp)
≤5MHz: 2ppm + 500ps
>5MHz: 500ps
Interpolation Method Off, Linear
Edit Method Edit Points, Edit Block
Harmonic
Harmonic Order ≤16
Harmonic Type Even, Odd, All, User
Harmonic Amplitude Can be set for all the orders of harmonics
Harmonic Phase Can be set for all the orders of harmonics
Output Characteristics
Amplitude (into 50 Ω)
Range
≤20MHz: 1mVpp to
10Vpp
≤70MHz: 1mVpp to
5Vpp
≤120MHz: 1mVpp to
2.5Vpp
≤200MHz: 1mVpp to
1Vpp
≤20MHz: 1mVpp to
10Vpp
≤70MHz: 1mVpp to
5Vpp
≤120MHz: 1mVpp to
2.5Vpp
≤160MHz: 1mVpp to
1Vpp
≤20MHz: 1mVpp to
10Vpp
≤70MHz: 1mVpp to
5Vpp
≤100MHz: 1mVpp to
2.5Vpp
≤20MHz: 1mVpp to
10Vpp
≤60MHz: 1mVpp to
5Vpp
Accuracy Typical (1kHz Sine, 0V Offset, >10mVpp, Auto)
± 1% of setting ± 2mVpp
Flatness
Typical (relative to 1kHz Sine, 500mVpp, 50Ω)
≤10MHz: ±0.1dB
≤60MHz: ±0.2dB
≤100MHz: ±0.4dB
≤160MHz: ±0.8dB
≤200MHz: ±1dB
≤10MHz: ±0.1dB
≤60MHz: ±0.2dB
≤100MHz: ±0.4dB
≤160MHz: ±0.8dB
≤10MHz: ±0.1dB
≤60MHz: ±0.2dB
≤100MHz: ±0.4dB
≤10MHz: ±0.1dB
≤60MHz: ±0.2dB
Unit Vpp, Vrms, dBm
Resolution 1mV or 3bits
Offset (into 50 Ω)
Range ±5Vpk ac + dc
Accuracy ±(1% of setting + 5mV + 0.5% of amplitude)
Waveform Output
Impedance 50Ω (Typical)
Protection Short-circuit protection, automatically disable waveform output when overload occurs
Modulation Characteristics
Modulation Type AM, FM, PM, ASK, FSK, PSK, BPSK, QPSK, 3FSK, 4FSK, OSK, PWM
AM
Carrier Waveform Sine, Square, Ramp, Arb (except DC)
Source Internal/External
Modulating Waveform Sine, Square, Ramp, Noise, Arb
Depth 0% to 120%
Modulating Frequency 2mHz to 50KHz
FM
Carrier Waveform Sine, Square, Ramp, Arb (except DC)
Source Internal/External
Modulating Waveform Sine, Square, Ramp, Noise, Arb
Modulating Frequency 2mHz to 50KHz
PM
Carrier Waveform Sine, Square, Ramp, Arb (except DC)
Source Internal/External
Modulating Waveform Sine, Square, Ramp, Noise, Arb
Phase Deviation 0° to 360°
Modulating Frequency 2mHz to 50KHz
ASK
Carrier Waveform Sine, Square, Ramp, Arb (except DC)
Source Internal/External
Modulating Waveform Square with 50% duty cycle
Key Frequency 2mHz to 1MHz
FSK
Carrier Waveform Sine, Square, Ramp, Arb (except DC)
Source Internal/External
Modulating Waveform Square with 50% duty cycle
Key Frequency 2mHz to 1MHz
3FSK
Carrier Waveform Sine, Square, Ramp, Arb (except DC)
Source Internal
Modulating Waveform Square with 50% duty cycle
Key Frequency 2mHz to 1MHz
4FSK
Carrier Waveform Sine, Square, Ramp, Arb (except DC)
Source Internal
Modulating Waveform Square with 50% duty cycle
Key Frequency 2mHz to 1MHz
PSK
Carrier Waveform Sine, Square, Ramp, Arb (except DC)
Source Internal/External
Modulating Waveform Square with 50% duty cycle
Key Frequency 2mHz to 1MHz
BPSK
Carrier Waveform Sine, Square, Ramp, Arb (except DC)
Source Internal
Modulating Waveform Sine, Square, Ramp, Noise, Arb
Key Frequency 2mHz to 1MHz
QPSK
Carrier Waveform Sine, Square, Ramp, Arb (except DC)
Source Internal
Modulating Waveform Sine, Square, Ramp, Noise, Arb
Key Frequency 2mHz to 1MHz
OSK
Carrier Waveform Sine
Source Internal/External
Oscillation Time 8ns to 499.75μs
Key Frequency 2mHz to 1MHz
PWM
Carrier Waveform Pulse
Source Internal/External
Modulating Waveform Sine, Square, Ramp, Noise, Arb
Width Deviation 0% to 100% of pulse width
Modulating Frequency 2mHz to 50KHz
External Modulation Input
Maximum Input Range 75mVRMS to ±2.5Vac+dc
Input Bandwidth 5MHz
Input Impedance 1kΩ
Burst Characteristics
Carrier Waveform Sine, Square, Ramp, Pulse, Noise, Arb (except DC)
Carrier Frequency 2mHz to 100MHz 2mHz to 100MHz 2mHz to 60MHz
Burst Count 1 to 1000000 or Innite
Start/Stop Phase 0° to 360°
Internal Period 2μs to 500s
Gated Source External Trigger
Trigger Source Internal, External or Manual
Trigger Delay 0ns to 85s
Sweep Characteristics
Carrier Waveform Sine, Square, Ramp, Arb (except DC)
Type Linear, Log or Step
Direction Up or Down
Start/Stop Frequency 1μHz to 200MHz 1μHz to 160MHz 1μHz to 100MHz 1μHz to 60MHz
Sweep Time 1ms to 300s
Hold/Return Time 0ms to 300s
Trigger Source Internal, External or Manual
Mark Falling edge of Sync signal (programmable)
Counter
Function Frequency, Period, Positive/Negative Pulse Width, Duty Cycle
Frequency Resolution 7 digits/second (Gate Time =1s)
Frequency Range 1μHz to 200MHz
Period Measurement 5ns to 16 days
Voltage Range and Sensitivity (Non-modulating signal)
DC Coupling
DC Offset Range ±1.5VDC
Input Attenuation:
OFF
1μHz to 100MHz 50mVRMS to ±2.5Vac +
dc
100MHz to 200MHz 100mVRMS to ±2.5Vac +
dc
AC Coupling 1μHz to 100MHz 50mVRMS to ±2.5Vpp
100MHz to 200MHz 100mVRMS to ±2.5Vpp
Pulse Width and Duty Cycle Measurements
Frequency/Amplitude Range 1μHz to 25MHz 50mVRMS to
±2.5Vac + dc DC Coupling,
Input Attenuation:
OFF
Pulse Width Minimum ≥20ns
Resolution 2ns
Duty Cycle Range (Display) 0% to 100%
Input Characteristics
Input Range Breakdown Voltage
±7Vac + dc (Attenuation:
OFF) Input Impedance =
1MΩ
±70Vac + dc (Attenuation:
OFF)
5Vrms Input Impedance =
50Ω
Input Adjustment
Input Attenuation ON: ×10; OFF: ×1
Input Impedance 50Ω 1MΩ
Coupling Mode AC DC
HF Reject ON: input bandwidth = 250kHz; OFF: input
bandwidth = 225MHz
Input Trigger
Trigger Level Range -2.5V to +2.5V
Trigger Sensitivity Range 0% (140mV hysteresis voltage) to 100% (2mV
hysteresis voltage)
Gate Time
GateTime1 1ms
GateTime2 10ms
GateTime3 100ms
GateTime4 1s
GateTime5 10s
GateTime6 >10s
Trigger Characteristics
Trigger Input
Level TTL-compatible
Slope Rising or falling (selectable)
Pulse Width >50ns
Latency Sweep: <100ns (typical)
Burst: <300ns (typical)
Trigger Output
Level TTL-compatible
Pulse Width >60ns (typical)
Maximum Rate 1MHz
Clock Reference
Phase Offset
Range 0° to 360°
Resolution 0.03°
External Reference Input
Lock Range 10MHz ± 50Hz
Level 250mVpp to 5Vpp
Lock Time <2s
Input Impedance (Typical) 1kΩ, AC coupling
Internal Reference Output
Frequency 10MHz ± 50Hz
Level 3.3Vpp
Input Impedance (Typical) 50Ω, AC coupling
Sync Output
Level TTL-compatible
Impedance 50 Ω, nominal
Programming Time (Typical)
USB 2.0 LAN
Function Variation 500ms 510ms
Frequency Variation 50ms 50ms
Amplitude Variation 300ms 310ms
Select User Arbitrary Waveform 500ms 510ms
General Specications
Power
Power Voltage 100V to 240V, 45Hz to 440Hz
Power Consumption Less than 50W
Fuse 250V, T2A
Display
Type 7-inch TFT LCD
Resolution 800 Horizontal × RGB × 480 Vertical Resolution
Color 16M color
Environment
Temperature Range Operating: 10℃ to 40℃
Non-Operating: -20℃ to 60℃
Cooling Method Cooling by fans compulsively
Humidity Range Less than 35℃: ≤90% Relative Humidity
35℃ to 40℃: ≤60% Relative Humidity
Altitude Operating: Less than 3000 meters
Non-Operating: Less than 15000 meters
Mechanical
Dimensions (W × H × D) 313mm × 160.7mm × 116.7mm
Weight Without package: 3.2kg
With package: 4.5kg
Interface
USB Host, USB Device, LAN
IP Protection
IP2X
Calibration Interval
Recommend 1 year for standard interval
Warranty
Three-year warranty, excluding accessories.
Ordering Information
Description Order Number
Models
DG4202 (200MHz, dual-channel) DG4202
DG4162 (160MHz, dual-channel) DG4162
DG4102 (100MHz, dual-channel) DG4102
DG4062 (60MHz, dual-channel) DG4062
Standard Accessories
Power Cord -
USB Cable CB-USBA-USBB-FF-150
BNC Cable (1 meter) CB-BNC-BNC-MM-100
Quick Guide -
Resource CD (including User’s Guide and Application Software) -
Warranty -
Optional Accessories
40dB Attenuator RA5040K
Rack Mount Kit RM-DG4000
10W Power Amplier Module PA1011
DG4 PC Software (Advanced Function Software) Ultra Station-adv
Soft Carrying Bag BAG-G1
RIGOL® is the registered trademark of RIGOL Technologies, Inc. Product information in
this document subject to update without notice. For the latest information about RIGOL's
products, applications and services, please contact local RIGOL ofce or access
RIGOL ofcial website: www.rigol.com
HEADQUARTER
RIGOL TECHNOLOGIES, INC.
No.156,Cai He Village,
Sha He Town,
Chang Ping District, Beijing,
102206 P.R.China
Tel:+86-10-80706688
Fax:+86-10-80705070
Electronic Measurement
Instrument service and support
email:EMD_support@rigol.com
Chemical Analysis Instrument
service and support email:service.
chem@rigol.com
EUROPE
RIGOL TECHNOLOGIES GmbH
Lindbergh str. 4
82178 Puchheim
Germany
Tel: 0049- 89/89418950
Email: info-europe@rigoltech.com
NORTH AMERICA
RIGOL TECHNOLOGIES,
USA INC.
10200 SW Allen Blvd, Suite C
Beaverton, OR 97005, USA
Toll free: 877-4-RIGOL-1
Ofce: (440) 232-4488
Fax: (216)-754-8107
Email: info@rigol.com
JAPAN
RIGOL TECHNOLOGIES JAPAN G.K.
Tonematsu Bldg. 5F, 2-33-8 Nihonbashi-
Ningyocho, Chuo-ku,
Tokyo 103-0013
Japan
Tel: +81-3-6264-9251
Fax: +81-3-6264-9252
Email: info-japan@rigol.com
November 2015