NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RV0023C DOC
Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, Ca 90638
Phone: (562) 404-7855 * Fax: (562) 404-1773
ssdi@ssdi-power.com * www.ssdi-power.com
Designer’s Data Sheet
Part Number / Ordering Information 1
/
SAM __ F __
_
_
│
│
│
│
│
│
│
│
│
└
│
│
│
│
│
│
│
└
│
│
│
│
└
└ Screening2
/
= None
TX = TX Level
TXV = TXV Level
S = S Level
Package
___ = Axial Leaded
SMS = Surface Mount Square Tab
Recovery Time
F = Fast Recovery
V
oltage
15 = 1500
20 = 2000
25 = 2500
30 = 3000
35 = 3500
40 = 4000
SAM15F – SAM40F
and
SAM15FSMS – SAM40FSMS
1.5 Amp
1500 ─ 4000 VOLTS
150 nsec
HIGH VOLTAGE
RECTIFIER
FEATURES:
Fast Recovery: 150 nsec Maximum
PIV to 4000 Volts
Hermetically Sealed
Void-Free Construction
Metallurgically Bonded
175°C Maximum Operating Temperature
TX, TXV, and Space Level Screening Available
2/
1/ For Ordering Information, Price, Operating Curves, and Availability – Contact Factory.
2/ Screening based on MIL-PRF-19500. Screening flows available on request.
3/ Operating and testing over 10,000 V/inch may require encapsulation or immersion in a
suitable dielectric material.
4/ Max. forward voltage measured with instantaneous forward pulse of 300µsec minimum.
5/ Max. end tab temp. for soldering is 250°C for 5 sec maximum.
6/ Operating and storage temperature: -65°C to +175°C.
Axial
SMS
ELECTRICAL CHARACTERISTICS (at 25°C unless otherwise specified)
Part
Number
Peak
Inverse
Voltage
Average
Rectifier
Current
Maximum
Reverse
Current
Maximum
Forward
Voltage
Maximum
Surge
Current
(1 Cycle)
Maximum
Reverse
Recovery
Time
Maximum
Junction
Capacitance
Typical
Thermal
Resistance
Symbol PIV IO I
R VF I
FSM t
RR C
J R
θJL / RθJE
Units V A A μA V A ns pF °C/W
Conditions 25°C 100°C
@ PIV
25°C
@ PIV
100°C @ IO
IF= .5 A
IR= 1 A
IR
R
= .25 A
VR= 100 V
fT= 1 MHZ
RθJL: L=3/8”
RθJE: L=0”
SAM15F 1500 1.5 1.2 1.0 25 6.5 60 150 15 12
SAM20F 2000 1.5 1.2 1.0 25 6.5 60 150 15 12
SAM25F 2500 1.5 1.2 1.0 25 6.5 60 150 15 12
SAM30F 3000 1.5 1.2 1.0 25 6.5 60 150 15 12
SAM35F 3500 1.5 1.2 1.0 25 6.5 60 150 15 12
SAM40F 4000 1.5 1.2 1.0 25 6.5 60 150 15 12
SAM15FSMS 1500 1.5 1.25 1.0 25 6.5 60 150 15 6
SAM20FSMS 2000 1.5 1.25 1.0 25 6.5 60 150 15 6
SAM25FSMS 2500 1.5 1.25 1.0 25 6.5 60 150 15 6
SAM30FSMS 3000 1.5 1.25 1.0 25 6.5 60 150 15 6
SAM35FSMS 3500 1.5 1.25 1.0 25 6.5 60 150 15 6
SAM40FSMS 4000 1.5 1.25 1.0 25 6.5 60 150 15 6
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RV0023C DOC
PACKAGE OUTLINE: Axial
DIMENSIONS
DIM MIN MAX
A --- .300”
B --- .320”
C .055” .063”
D .400” ---
PACKAGE OUTLINE: Surface Mount Square Tab
DIMENSIONS
DIM MIN MAX
A .195” .205”
B .330” .410”
C .020” .035”
D .002” ---
Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, Ca 90638
Phone: (562) 404-7855 * Fax: (562) 404-1773
ssdi@ssdi-power.com * www.ssdi-power.com
SAM15F – SAM40F
and
SAM15FSMS – SAM40FSMS
