STLQ015 150 mA, ultra low quiescent current linear voltage regulator Datasheet - production data Application Mobile phones Digital still cameras (DSC) Battery-powered equipment Portable media players Description Features Input voltage from 1.5 to 5.5 V Very low quiescent current: 1.0 A (typ.) at no load 1.4 A (typ.) at 150 mA load 1 nA (typ.) in OFF mode 200 nA max. in OFF mode at 125 C Output voltage tolerance: 2% at 25 C 150 mA guaranteed output current Wide range of output voltages: 0.8 V to 3.3 V in 100 mV steps Logic-controlled electronic shutdown Compatible with ceramic capacitor (COUT = 1 F) Internal current and thermal limit Temperature range: from -40 C to 125 C September 2016 The STLQ015 provides 150 mA of maximum current with an input voltage range from 1.5 V to 5.5 V and a typical dropout voltage of 112 mV. The key feature of this device is its quiescent current, which is just 1.4 A at maximum output current. The device is stable with a ceramic capacitor on the output. It offers very low quiescent current and extends battery-life of applications requiring very long standby time. The enable logic control function puts the STLQ015 in shutdown mode, reducing total current consumption to 1 nA. The device also includes short-circuit constant-current limiting and thermal protection. Typical applications are: portable and battery-powered systems, electronic sensors and microcontroller power supply. DocID17285 Rev 6 This is information on a product in full production. 1/17 www.st.com Contents STLQ015 Contents 1 Block diagram.................................................................................. 3 2 Pin configuration and description.................................................. 4 3 Typical application .......................................................................... 5 4 5 Maximum ratings ............................................................................. 6 Electrical characteristics ................................................................ 7 6 Typical performance characteristics ............................................. 9 7 Package information ..................................................................... 12 7.1 SOT23-5L package information ...................................................... 12 7.2 SOT23-5L packing information........................................................ 14 8 Ordering information..................................................................... 15 9 Revision history ............................................................................ 16 2/17 DocID17285 Rev 6 STLQ015 1 Block diagram Block diagram Figure 1: Device block diagram DocID17285 Rev 6 3/17 Pin configuration and description 2 STLQ015 Pin configuration and description Figure 2: Pin configuration (top view) Table 1: Pin description 4/17 Pin Symbol Functions 3 EN 2 GND 1 IN 5 OUT Output voltage 4 NC Not connected Enable input Set VEN = high to turn on the device Set VEN = low to turn off the device Ground Input voltage DocID17285 Rev 6 STLQ015 3 Typical application Typical application Figure 3: Typical application circuit DocID17285 Rev 6 5/17 Maximum ratings 4 STLQ015 Maximum ratings Table 2: Absolute maximum ratings Symbol VIN Parameter DC input voltage Value Unit -0.3 to 7 V VOUT DC output voltage -0.3 to VIN+0.3 V VEN Enable input voltage -0.3 to VIN+0.3 V IOUT Output current Internally limited mA 3 kV 300 V Internally limited mW Human body model ESD Machine model PD Power dissipation TSTG Storage temperature range -65 to 150 C TOP Max. junction temperature 150 C Absolute maximum ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is not implied. All values are referred to GND. Table 3: Thermal data Symbol 6/17 Parameter Value Unit RthJA Thermal resistance junction-ambient 255 C/W RthJC Thermal resistance junction-case 81 C/W DocID17285 Rev 6 STLQ015 5 Electrical characteristics Electrical characteristics TJ = 25 C, VIN = VOUT(NOM) + 1 V, CIN = COUT = 1 F, IOUT = 1 mA, VEN = VIN, unless otherwise specified. Table 4: Electrical characteristics Symbol VIN VOUT VOUTLINE VOUTLOAD VDROP eN SVR IQ Parameter Operating input voltage VOUT accuracy Test conditions Typ. Max. Unit IOUT = 0 1.5 5.5 -40 C < TJ < 125 C, IOUT = 150 mA 1.55 5.5 IOUT = 1 mA -2 2 % IOUT = 1 mA, VOUT < 1 V -20 +20 mV IOUT = 1 mA, -40 C < TJ < 125 C -3 3 % V Static line regulation VOUT +1 V VIN 5.5 V, IOUT = 1 mA 0.01 %/V Static load regulation IOUT = 1 mA to 150 mA 0.002 %/mA Dropout voltage (1) Output noise voltage Supply voltage rejection VOUT = 0.8 V Quiescent current IOUT = 150 mA 112 IOUT = 150 mA, -40 C < TJ < 125 C 300 10 kHz to 100 kHz, IOUT = 10 mA, VOUT = 0.8 V 75 VIN = VOUTNOM + 1 V +/-VRIPPLE VRIPPLE = 0.1 V, frequency = 1 kHz IOUT = 10 mA 40 VIN = VOUTNOM + 1 V +/-VRIPPLE VRIPPLE = 0.1 V, frequency =10 kHz IOUT = 1 mA 30 VIN = VOUTNOM + 1 V +/-VRIPPLE VRIPPLE = 0.1 V, frequency = 100 kHz IOUT = 1 mA 15 IOUT = 0 1.0 1.7 IOUT = 0 to 150 mA, -40 C < TJ < 125 C 1.4 2.4 1 200 IOFF Shutdown current (2) VIN input current in OFF mode: VEN = GND, -40 C < TJ < 125 C ISC Short-circuit current RL = 0 Enable input logic low VIN = 1.5 V to 5.5 V Enable input logic high VIN = 1.5 V to 5.5 V VEN Min. 250 DocID17285 Rev 6 VRMS dB 350 A nA mA 0.4 0.7 mV V V 7/17 Electrical characteristics Symbol STLQ015 Parameter Test conditions IEN Enable pin input current VEN = 5.5 V TON Turn-on time (3) VOUT = 0.8 V, IOUT = 150 mA TSHDN Typ. Max. Unit 1 200 nA 160 Thermal shutdown 170 Hysteresis 15 Output capacitor COUT Min. Capacitance (see typical performance characteristics for stability) ESR s C 0.47 10 F 0.056 6 Notes: (1)Dropout voltage is the input-to-output voltage difference at which the output voltage is 100 mV below its nominal value. This specification does not apply to output voltages below 1.5 V. (2)During shutdown and at no load, P-channel leakage current flowing through the internal resistor divider causes the V OUT rise. (3)Turn-on time is the time measured between the enable input just exceeding VEN high value and the output voltage just reaching 95% of its nominal value. 8/17 DocID17285 Rev 6 STLQ015 6 Typical performance characteristics Typical performance characteristics Figure 4: Output voltage vs temperature Figure 5: Output voltage vs input voltage (VOUT = 0.8 V) Figure 6: Output voltage vs input voltage (VOUT = 3.3 V) Figure 7: Dropout voltage vs temperature DocID17285 Rev 6 9/17 Typical performance characteristics STLQ015 Figure 8: Dropout voltage vs temperature Figure 9: Quiescent current vs temperature Figure 10: Supply voltage rejection vs frequency Figure 11: Supply voltage rejection vs IOUT Figure 12: Quiescent current vs input voltage Figure 13: Quiescent current vs output current 10/17 DocID17285 Rev 6 STLQ015 Typical performance characteristics Figure 14: Output noise voltage vs frequency Figure 15: COUT stability region Figure 16: Start-up transient Figure 17: Enable transient DocID17285 Rev 6 11/17 Package information 7 STLQ015 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK (R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark. 7.1 SOT23-5L package information Figure 18: SOT23-5L package outline 12/17 DocID17285 Rev 6 STLQ015 Package information Table 5: SOT23-5L package mechanical data mm Dim. Min. Typ. Max. A 0.90 1.45 A1 0 0.15 A2 0.90 1.30 b 0.30 0.50 c 0.09 0.20 D 2.95 E 1.60 e 0.95 H 2.80 L 0.30 0.60 0 8 Figure 19: SOT23-5L recommended footprint Dimensions are in mm DocID17285 Rev 6 13/17 Package information 7.2 STLQ015 SOT23-5L packing information Figure 20: SOT23-5L tape and reel outline D A N T Po Bo Ko Ao P Table 6: SOT23-5L tape and reel mechanical data Dim. mm Min. Typ. A 180 C 12.8 D 20.2 N 60 13.0 T 14/17 Max. 13.2 14.4 Ao 3.13 3.23 3.33 Bo 3.07 3.17 3.27 Ko 1.27 1.37 1.47 Po 3.9 4.0 4.1 P 3.9 4.0 4.1 DocID17285 Rev 6 STLQ015 8 Ordering information Ordering information Table 7: Order code Order code Output voltage STLQ015M12R 1.2 V 1512 STLQ015M15R 1.5 V 1515 STLQ015M18R 1.8 V 1518 STLQ015M21R 2.1 V 1521 STLQ015M25R 2.5 V STLQ015M28R 2.8 V 1528 STLQ015M30R 3.0 V 1530 STLQ015M31R 3.1 V 1531 STLQ015M33R 3.3 V 1533 DocID17285 Rev 6 Package SOT23-5L Marking 1525 15/17 Revision history 9 STLQ015 Revision history Table 8: Document revision history Date Revision 23-Mar-2010 1 Initial release. 20-Jan-2011 2 Modified: Table 5 on page 13 and Figure 18. Added: Figure 19. 11-Sep-2012 3 Added: new order codes STLQ015XG12R, STLQ015XG15R and STLQ015XG18R to the device summary table. 4 Changed the part number STLQ015xx to STLQ015. Changed the title in cover page. Updated Description and Table : in cover page. Changed typ. value of IQ parameter in Table 4: Electrical characteristics. Minor text changes. 03-Jul-2015 5 Added package SOT23-5L. Updated Table 1.: Pin description, Table 3.: Thermal data and Figure 2.: Pin configuration (top view) Updated 8: Order code. Updated Section 7: Package information. Minor text changes. 02-Sep-2016 6 Updated Section 8: "Ordering information". Minor text changes. 17-Feb-2014 16/17 Changes DocID17285 Rev 6 STLQ015 IMPORTANT NOTICE - PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST's terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers' products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. (c) 2016 STMicroelectronics - All rights reserved DocID17285 Rev 6 17/17