NVMFS6B05NL Power MOSFET 100 V, 5.6 mW, 114 A, Single N-Channel Features * * * * * * Small Footprint (5x6 mm) for Compact Design Low RDS(on) to Minimize Conduction Losses Low QG and Capacitance to Minimize Driver Losses NVMFS6B05NLWF - Wettable Flank Option for Enhanced Optical Inspection AEC-Q101 Qualified and PPAP Capable These Devices are Pb-Free and are RoHS Compliant www.onsemi.com V(BR)DSS RDS(ON) MAX ID MAX 5.6 mW @ 10 V 114 A 100 V 8.2 mW @ 4.5 V MAXIMUM RATINGS (TJ = 25C unless otherwise noted) Symbol Value Unit Drain-to-Source Voltage VDSS 100 V Gate-to-Source Voltage VGS 16 V ID 114 A Parameter Continuous Drain Current RqJC (Notes 1, 3) TC = 25C Power Dissipation RqJC (Note 1) Continuous Drain Current RqJA (Notes 1, 2, 3) Steady State TC = 100C TC = 25C Power Dissipation RqJA (Notes 1 & 2) Pulsed Drain Current 80 G (4) PD TC = 100C TA = 25C Steady State ID Operating Junction and Storage Temperature Source Current (Body Diode) S (1,2,3) A 17 N-CHANNEL MOSFET 12 PD TA = 100C TA = 25C, tp = 10 ms W 165 83 TA = 100C TA = 25C D (5,6) W 3.8 MARKING DIAGRAM 1.9 IDM 330 A TJ, Tstg -55 to + 175 C IS 130 A Single Pulse Drain-to-Source Avalanche Energy (IL(pk) = 50 A) EAS 125 mJ Lead Temperature for Soldering Purposes (1/8 from case for 10 s) TL 260 C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. D 1 DFN5 (SO-8FL) CASE 488AA STYLE 1 S S S G D XXXXXX AYWZZ D D XXXXXX = 6B05NL (NVMFS6B05NL) or XXXXXX = 6B05LW (NVMFS6B05NLWF) A = Assembly Location Y = Year W = Work Week ZZ = Lot Traceability THERMAL RESISTANCE MAXIMUM RATINGS Parameter Symbol Value Unit Junction-to-Case - Steady State RqJC 0.9 C/W Junction-to-Ambient - Steady State (Note 2) RqJA 39 ORDERING INFORMATION See detailed ordering, marking and shipping information on page 5 of this data sheet. 1. The entire application environment impacts the thermal resistance values shown, they are not constants and are only valid for the particular conditions noted. 2. Surface-mounted on FR4 board using a 650 mm2, 2 oz. Cu pad. 3. Maximum current for pulses as long as 1 second is higher but is dependent on pulse duration and duty cycle. (c) Semiconductor Components Industries, LLC, 2016 January, 2016 - Rev. 0 1 Publication Order Number: NVMFS6B05NL/D NVMFS6B05NL ELECTRICAL CHARACTERISTICS (TJ = 25C unless otherwise specified) Parameter Symbol Test Condition Min Drain-to-Source Breakdown Voltage V(BR)DSS VGS = 0 V, ID = 250 mA 100 Drain-to-Source Breakdown Voltage Temperature Coefficient V(BR)DSS/ TJ Typ Max Unit OFF CHARACTERISTICS Zero Gate Voltage Drain Current IDSS Gate-to-Source Leakage Current V 62.9 VGS = 0 V, VDS = 80 V mV/C TJ = 25 C 25 TJ = 125C 250 IGSS VDS = 0 V, VGS = 16 V VGS(TH) VGS = VDS, ID = 250 mA 100 mA nA ON CHARACTERISTICS (Note 4) Gate Threshold Voltage Threshold Temperature Coefficient VGS(TH)/TJ Drain-to-Source On Resistance RDS(on) 1.0 3.0 -5.8 VGS = 10 V VGS = 4.5 V ID = 20 A V mV/C 4.7 5.6 6.5 8.2 mW CHARGES AND CAPACITANCES Input Capacitance CISS Output Capacitance COSS Reverse Transfer Capacitance CRSS 3980 VGS = 0 V, f = 1 MHz, VDS = 25 V 1370 pF 89 VGS = 4.5 V, VDD = 50 V, ID = 50 A 24.6 Total Gate Charge QG(TOT) Threshold Gate Charge QG(TH) Gate-to-Source Charge QGS Gate-to-Drain Charge QGD 5.9 Plateau Voltage VGP 3.2 td(ON) 17.3 52.5 6.8 VGS = 10 V, VDS = 50 V; ID = 50 A nC 12 V SWITCHING CHARACTERISTICS (Note 5) Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time tr td(OFF) VGS = 10 V, VDS = 50 V, ID = 25 A, RG = 2.5 W tf 84 ns 28.4 83.2 DRAIN-SOURCE DIODE CHARACTERISTICS Forward Diode Voltage Reverse Recovery Time VSD TJ = 25C 0.84 TJ = 125C 0.72 tRR Charge Time ta Discharge Time tb Reverse Recovery Charge VGS = 0 V, IS = 25 A 1.2 V 60.6 VGS = 0 V, dIS/dt = 100 A/ms, IS = 25 A QRR 31.4 ns 29.2 82 nC Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 4. Pulse Test: pulse width v 300 ms, duty cycle v 2%. 5. Switching characteristics are independent of operating junction temperatures. www.onsemi.com 2 NVMFS6B05NL TYPICAL CHARACTERISTICS 140 ID, DRAIN CURRENT (A) 120 3.6 V 80 3.4 V 60 3.2 V 40 3.0 V VDS = 10 V 100 80 60 40 20 20 0 0 TJ = 25C TJ = 125C 0.5 1.5 1.0 2.0 3.0 2.5 0 2 4 3 5 VGS, GATE-TO-SOURCE VOLTAGE (V) Figure 1. On-Region Characteristics Figure 2. Transfer Characteristics 12 ID = 50 A TJ = 25C 10 8 6 4 2 3 1 TJ = -55C VDS, DRAIN-TO-SOURCE VOLTAGE (V) RDS(on), DRAIN-TO-SOURCE RESISTANCE (mW) ID, DRAIN CURRENT (A) 3.8 V 100 0 RDS(on), DRAIN-TO-SOURCE RESISTANCE (mW) 140 4.0 V VGS = 10 V to 4.5 V 120 4 5 6 7 8 9 10 VGS, GATE VOLTAGE (V) 8 VGS = 4.5 V 7 6 VGS = 10 V 5 4 3 TJ = 25C 2 10 30 50 90 70 110 130 150 ID, DRAIN CURRENT (A) Figure 3. On-Resistance vs. Gate-to-Source Voltage Figure 4. On-Resistance vs. Drain Current and Gate Voltage 2.0 TJ = 150C ID = 50 A VGS = 10 V 1.E+04 TJ = 125C IDSS, LEAKAGE (nA) RDS(on), NORMALIZED DRAIN-TO- SOURCE RESISTANCE 1.E+05 2.2 1.8 1.E+03 1.6 1.4 TJ = 85C 1.E+02 1.2 1.0 1.E+01 0.8 0.6 -50 -25 1.E+00 0 25 50 75 100 125 150 175 0 10 20 30 40 50 60 70 80 90 100 TJ, JUNCTION TEMPERATURE (C) VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 5. On-Resistance Variation with Temperature Figure 6. Drain-to-Source Leakage Current vs. Voltage www.onsemi.com 3 NVMFS6B05NL TYPICAL CHARACTERISTICS C, CAPACITANCE (pF) Ciss Coss 1E+3 Crss VGS = 0 V TJ = 25C f = 1 MHz 1E+2 1E+1 0 10 20 30 40 50 60 70 80 90 QT 9 8 7 6 5 4 Qgd Qgs 3 TJ = 25C VDS = 50 V ID = 50 A 2 1 0 4 0 100 8 12 16 20 24 28 32 36 40 44 48 52 VDS, DRAIN-TO-SOURCE VOLTAGE (V) Qg, TOTAL GATE CHARGE (nC) Figure 7. Capacitance Variation Figure 8. Gate-to-Source Voltage vs. Charge 100 1000 IS, SOURCE CURRENT (A) VDS = 50 V ID = 25 A VGS = 4.5 V tf tr 100 td(off) td(on) 10 10 TJ = 125C 1 1 10 0.3 100 0.4 0.5 TJ = 25C 0.6 TJ = -55C 0.7 0.8 0.9 1.0 1.1 RG, GATE RESISTANCE (W) VSD, SOURCE-TO-DRAIN VOLTAGE (V) Figure 9. Resistive Switching Time Variation vs. Gate Resistance Figure 10. Diode Forward Voltage vs. Current 1000 ID, DRAIN CURRENT (A) t, TIME (ns) 10 VGS, GATE-TO-SOURCE VOLTAGE (V) 1E+4 100 VGS 10 V Single Pulse TC = 25C 500 ms 10 1 ms 1 10 ms RDS(on) Limit Thermal Limit Package Limit 0.1 0.01 0.1 1 10 100 VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 11. Maximum Rated Forward Biased Safe Operating Area www.onsemi.com 4 NVMFS6B05NL TYPICAL CHARACTERISTICS 100 70 IPEAK, DRAIN CURRENT (A) GFS, SMALL-SIGNAL FORWARD TRANSFER CONDUCTANCE (S) 80 60 50 40 30 20 10 25C 10 100C 1 0 0 10 20 30 40 50 60 70 80 0.0001 90 100 0.001 0.01 ID, DRAIN CURRENT (A) TAV, TIME IN AVALANCHE (sec) Figure 12. GFS vs. ID Figure 13. IPEAK vs. TAV 100 50% Duty Cycle R(t) (C/W) 10 1 20% 10% 5% 2% 1% 0.1 NVMFS6B05NL, 650 mm2, 2 oz, Cu Single Layer Pad 0.01 Single Pulse 0.001 0.000001 0.00001 0.0001 0.001 0.01 0.1 1 10 100 1000 PULSE TIME (sec) Figure 14. Thermal Response DEVICE ORDERING INFORMATION Marking Package Shipping NVMFS6B05NLT1G 6B05NL DFN5 (Pb-Free) 1500 / Tape & Reel NVMFS6B05NLWFT1G 605LW DFN5 (Pb-Free, Wettable Flanks) 1500 / Tape & Reel NVMFS6B05NLT3G 6B05NL DFN5 (Pb-Free) 5000 / Tape & Reel NVMFS6B05NLWFT3G 605LW DFN5 (Pb-Free, Wettable Flanks) 5000 / Tape & Reel Device For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. www.onsemi.com 5 NVMFS6B05NL PACKAGE DIMENSIONS DFN5 5x6, 1.27P (SO-8FL) CASE 488AA ISSUE M 2X 0.20 C D NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION D1 AND E1 DO NOT INCLUDE MOLD FLASH PROTRUSIONS OR GATE BURRS. A 2 B D1 2X 0.20 C 4X E1 q E 2 c 1 2 3 DIM A A1 b c D D1 D2 E E1 E2 e G K L L1 M q A1 4 TOP VIEW C SEATING PLANE DETAIL A 0.10 C A 0.10 C SIDE VIEW RECOMMENDED SOLDERING FOOTPRINT* DETAIL A 2X 0.10 b C A B 0.05 c 0.495 8X MILLIMETERS MIN NOM MAX 0.90 1.00 1.10 0.00 --- 0.05 0.33 0.41 0.51 0.23 0.28 0.33 5.00 5.30 5.15 4.70 4.90 5.10 3.80 4.00 4.20 6.15 6.00 6.30 5.70 5.90 6.10 3.45 3.65 3.85 1.27 BSC 0.51 0.575 0.71 1.20 1.35 1.50 0.51 0.575 0.71 0.125 REF 3.00 3.40 3.80 0_ --- 12 _ STYLE 1: PIN 1. SOURCE 2. SOURCE 3. SOURCE 4. GATE 5. DRAIN 4.560 2X e/2 1.530 e L 1 4 K 3.200 4.530 E2 PIN 5 (EXPOSED PAD) L1 M 1.330 2X 0.905 1 G D2 0.965 4X BOTTOM VIEW 1.000 4X 0.750 1.270 PITCH DIMENSIONS: MILLIMETERS *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and the are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 6 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NVMFS6B05NL/D