1 of 3 August 2008
CTS Electronic Components www.ctscorp.com
Single In-Line Conformal Series 770
Technical
Data
Resistance Tolerance: Resistance Range:
Standard: ±2% or 0.5 (whichever is greater) Standard: 10 to 1 Meg
Operating Temperature Range: Dielectric Strength:
-55°C to +125°C 100 VAC
Temperature Coefficient: Maximum Operating Voltage:
Standard: 100 to 1 Meg 100V not to exceed rated power
100PPM/°C typical
22 to 99
±200PPM/°C typical
Types of Circuits
Bussed (Schematic 1) Isolated (Schematic 3) Dual Terminator (Schematic 5)
Features
• High-Reliability Cermet Resistors
• Space Saving Over Individual Resistors
• Available in Odd or Even Number of Pins
From 4 to 12 Leads
• 2.54mm/.100 in. Pin Spacing
• Packaged in Bulk
• RoHS Compliant in accordance with
EU Directive No. 2002/95/EC
• Series 770 does not contain: Cadmium,
Hexavalent Chromium, Lead, Mercury,
PBB’s, PBDE’s
• Moisture Sensitivity Level (MSL): 1
As defined by J-STD-020C
• Second Level Interconnect code: e1
Available in 4, 6, 8, 10, 12 Pins Available in 6, 8, 10 Pins Available in 4 through 12 Pins
Page 2 of 3 August 2008
CTS Electronic Components www.ctscorp.com
Package Dimensions
Standard Resistor Values & EIA Code
Ohms Code Ohms Code Ohms Code Ohms Code Ohms Code Ohms Code
10 100 75 750 510 511 3.9K 392 33K 333 270K 274
12 120 82 820 560 561 4.7K 472 39K 393 330K 334
15 150 100 101 680 681 5.1K 512 47K 473 390K 394
18 180 110 111 820 821 5.6K 562 51K 513 470K 474
22 220 120 121 1K 102 6.8K 682 56K 563 510K 514
27 270 150 151 1.2K 122 8.2K 822 68K 683 560K 564
33 330 180 181 1.5K 152 10K 103 82K 823 680K 684
39 390 220 221 1.8K 182 12K 123 100K 104 820K 824
47 470 270 271 2.0K 202 15K 153 120K 124 1M 105
51 510 330 331 2.2K 222 18K 183 150K 154
56 560 390 391 2.7K 272 22K 223 180K 184
68 680 470 471 3.3K 332 27K 273 220K 224
Number of Pins "A" Dimension - Maximum Packaged Power @25°C Packaged Power @70°C
4 10.36/0.408 0.50W 0.30W
5 12.90/0.508 0.70W 0.40W
6 15.44/0.608 0.80W 0.50W
7 17.55/0708 0.90W 0.60W
8 20.52/0.808 1.10W 0.70W
9 23.06/0.908 1.20W 0.80W
10 25.60/1.008 1.40W 0.90W
11 28.14/1.108 1.50W 1.00W
12 30.68/1.208 1.60W 1.10W
Schematic Packaged Power @25°C Packaged Power @70°C
1 & 5 0.125W 0.83W
3 0.20W 0.125W
NOTES:
*Copper Alloy Leads,
Solder-coated
Part Marking:
For parts with reduced
marking area (8 pins or less),
the part series (770) may be
omitted from the part number
portion of the marking .
Example: CTSK082281103P
Page 3 of 3 August 2008
CTS Electronic Components www.ctscorp.com
How to Order
Packaging
Bulk Pack All Products 250 Parts/Bag
Environmental Performance Specifications
Test Max. %
Delta R Mil. Std.
202 Method Test Cond. Test Description
Thermal Cycling 0.5% 107 B 5 cycles, -65°C to +125°C
Short Time Overload 0.5% 2 1/2 x rated voltage, 5 sec (100V Max.)
Moisture Resistance 0.5% 106 240 hours, 0.1 rated load, -10°C to +65°C, 90% RH
Load Humidity 1.0% 1000 hours, 0.1 rated load, 70°C, 85-92% RH
High Temp Exposure 1.0% 240 hours, no load, @ 125°C
Load Life 1.0% 108 D 1000 hours @ 70°C rated load
Resistance to Solder Heat 0.25% A 3 second dwell @ 350°C, dwell
Mechanical Shock 0.25% 213 I 100g, 1 msec., 3 shocks each plane
Vibration 0.25% 204 D 20g, 10-2000Hz, 4 hours/plane
Terminal Strength 0.25% 2.0 Kg. pull, 30 sec., three 45° bends
Low Temp Storage 0.25% 24 hours @ -65°C, no load
Low Temp Operation 0.25% 45 min @ -65°C, full load
Flammability N/A 94V-0
Non-Fungus per MIL-STD
810C
Resistance to Solvents Isopropyl alcohol
Solderability RMA Flux, 230°C, 5 seconds dip, 95% coverage
770 10 1 103 P
RoHS Compliant (Sn/Ag solder) Part Number Series
1 Bussed
3 Isolated
5 Dual Terminator
Schematic
NOTE: No dashes or spaces to appear in part number.
Example: 770101103P
Resistor Code
Number of Pins
Refer to the EIA Code Noted on Page 2.
Resistor Code Schematics 1 & 3
Resistor Value Schematic 5
Example 220/330 = 220/330
Example 470/1.2K = 470/1200
All part numbers are ±2%
