www.greenlee.com KNOCKOUTS Want Speed? Try the Greenlee SPEED PUNCHTM System. Want Self Centering? Slug Splitter / Slug Buster(R) SC. Want Size? Large-Diameter Stainless Steel Knockouts. Want the widest range of fast, reliable knockouts? Try Greenlee. Contents Speed PunchTM Knockouts 60 Electric & Battery-Powered Knockout Kits62 Slug-Splitter SCTM Knockout Punches/Kits 64 Slug-Buster(R) Hydraulic Knockouts/Kits 66 Slug-Buster(R) Knockouts/Kits 72 Standard Hydraulic Knockout Kits 77 Standard Knockout Kits 79 Knockouts For Stainless Steel 82 Slug-Buster(R) Knockouts 84 Standard Knockouts 86 Special Application Punches 88 Knockout Parts Cabinets 91 Draw Studs For Knockouts 92 Stud Punches 96 C-Frame Punches 98 Manual Hydraulic Pumps 99 Hydraulic Pump Accessories 100 USA PHONE 800.435.0786 FAX 800.451.2632 CANADA PHONE 866.384.8813 FAX 800.524.2853 INT'L PHONE +1.815.397.7070 FAX +1.815.397.9247 Knockouts SELECTION GUIDES Holemaking Selection Guide MATERIAL material Type Thickness of Holes ProductS application Considerations pages Steel 10GA Highest Slug-Splitter SCTM Punches Maximum durability and universal material usage Maximum hole size 2-3/8 inches 64-67 Speed PunchTM Punches Maximum hole size 2-3/8 inches 60-61 Stainless Steel 10GA High Slug-Buster Punches Maximum hole size 2-3/8 inches 68-80 10GA High Standard Punches Maximum hole size 6-3/8 inches 81-87 10GA 8GA Medium-High High Ultra Cutters Carbide-Tipped Hole Cutters Maximum hole size 2-1/2 inches Maximum hole size 2-1/2 inches 120 119 10GA Medium-High Step Bits Maximum hole size 1-3/8 inches 104-105 10GA 10GA Medium Highest Hole Saws Slug-Splitter SCTM Punches 121-122 64-67 10GA Highest Lrg. Dia. Punches for Stainless Maximum hole size 6 inches Maximum durability and universal material usage Hole size 2-1/2 - 4 inches 9GA Medium-High Maximum hole size 3 inches, quick change cutting heads Maximum hole size 2-1/2 inches 118 Cuts through nails, good chip removal, max hole size 1 inches Cuts through nails, good chip removal, max hole size 1-1/4 inches Self feed screw for hard or soft woods, max hole size 4-5/8 inches Maximum hole size 1-3/8 inches, low chip removal Maximum hole size 1-1/2 inches Maximum hole size 6 inches Maximum durability and universal material usage Maximum hole size 2-3/8 inches Maximum hole size 2-3/8 inches Maximum hole size 2-3/8 inches Maximum hole size 6-3/8 inches Maximum hole size 2-1/2 inches Maximum hole size 1-3/8 inches Maximum hole size 6 inches Maximum durability and universal material usage Maximum hole size 2-3/8 inches Maximum hole size 2-3/8 inches Maximum hole size 2-3/8 inches Maximum hole size 6-3/8 inches Maximum hole size 2-1/2 inches Maximum hole size 1-3/8 inches Maximum hole size 6 inches Replaceable blades Adjustable or fixed, sprinkler heads or lighting Non-round holes 106 (R) 8GA Medium-High Quick Change CarbideTipped Cutter Carbide-Tipped Hole Cutters 18" High Nail Eater(R) RT 18" High Nail Eater II(R) Bits 2-2 x 4's High E-Z Bore(R) Bits Aluminum 2x4 16" 1-5/8" or 2 x 4 10GA High Medium High Highest Step Bits Spade Bits Hole Saws Slug-Splitter SCTM Punches Fiberglass/Plastic 10GA 10GA 10GA 10GA 10GA approx. 1/8" High High High High Medium Highest Speed PunchTM Punches Slug-Buster(R) Punches Standard Punches Ultra Cutters Step Bits Hole Saws Slug-Splitter SCTM Punches approx. 1/8" approx. 1/8" 1-5/8" 7/8" 7/8" 7/8" High High High Medium-High Medium High Medium-Low Medium Speed PunchTM Punches Slug-Buster(R) Punches Standard Punches Ultra Cutters Step Bits Hole Saws Recessed Light Hole Saws Quick Cutter Keyhole Saw approx. 1/8" High High Slug-Buster(R) Punches Carbide-Grit Hole Saws High Carbide-Grit Hole Saws D'versibits(R) Non-Round Punches Reciprocating Blades Wood Drywall/Ceiling Tile Quazite(R)* Enclosures Cement Board/Hardy Board Siding Existing Wall Non-Round Hole Metric & Non-Conduit Sizes Metal Studs High Medium 16-10GA 20GA TRUSTED 58 NUMBER SINCE 1862 High PHONE 800.435.0786 FAX 800.451.2632 119 107 110 104-105 111-112 121-122 64-67 60-61 68-80 81-87 120 104-105 121-122 64-67 60-61 68-80 81-87 120 104-105 121-122 126 126 131 68-80 123 Remodeling, phone, cable, alarm installation Square, rectangular, electronic connector holes Standard Punches Stud Punches USA 67 123 113-117 88-90 128-129 81-87 96-97 CANADA PHONE 866.384.8813 FAX 800.524.2853 INT'L PHONE +1.815.397.7070 FAX +1.815.397.9247 = Replacement Part = new product B = Accessory = Bare tool Knockout Punch Selection Guide Driver Type drive method capacity size range available Pages Speed PunchTM Hydraulic or Battery Mild steel up thru 10 gauge (3.5 mm) 1.115" through 2.416" dia. (28.3 mm through 61.4 mm) 60-61 Slug-SplitterTM & Slug-Splitter SCTM Ratchet, Hydraulic or Battery Stainless steel or mild steel up thru 10 gauge (3.5 mm) .598" through 2.526" dia. (15.2 mm through 64 mm) 64-67 Slug-Buster(R) & Slug-Buster SC(R) Manual, Ratchet, Hydraulic or Battery Mild steel up thru 10 gauge (3.5 mm) .492" through 2.52" dia. (12.5 mm through 64.0 mm) 68-80 Standard Round Manual, Ratchet, Hydraulic or Battery Mild steel up thru 10 gauge (3.5 mm) .500" through 6.375" dia. (12.7 through 161.9 mm) 81-87 Description * Punch holes from any angle with the 360 rotating head. * Punches up to 6" holes in 14 gauge mild steel and 2" holes in 14 gauge stainless steel. * Slim, compact and lightweight design for reduced fatigue and easy control. * Automatic retraction prevents damage to punch and die. * One trigger controls all tool functions, no additional manual work required. * LED light illuminates dark work areas. AVAILABLE DRIVER Kits Driver with Speed PunchTM Punches Pages 60-61 Driver Only and Driver with Slug-Buster(R) Punches 62-63 Battery-Powered or Corded Hydraulic Driver (18V Li-Ion Battery or 120VAC Adapter) * Develops 6.7 tons of hydraulic force. * Available with a choice of three battery chargers - 120V. * Punches up through 10 gauge (3.5 mm) mild steel with Greenlee Speed PunchTM, Slug-Buster(R) and standard knockout punches and 12 gauge (2.5 mm) stainless steel with Greenlee Slug-Splitter SCTM knockout punches. Driver Only and Driver with Slug-Buster(R) Punches 62-63 Hand Pump Hydraulic Driver with Ram * Foot operation frees both hands to operate punch. * Powerful hydraulic ram develops 11 tons of hydraulic force. * Punches up through 10 gauge (3.5 mm) mild steel with Greenlee Speed PunchTM, Slug-Buster(R) and standard knockout punches and 10 gauge (3.5 mm) stainless steel with Greenlee Slug-Splitter SCTM knockout punches. Driver with Slug-Buster(R) SC Punches 64-65 Driver Only and Driver with Slug-Buster(R) Punches 68-69 Driver with Standard Punches 81-82 Foot Pump Hydraulic Driver with Ram * Powerful hydraulic ram develops 11 tons of hydraulic force. * Punches up through 10 gauge (3.5 mm) mild steel with Greenlee Speed PunchTM, Slug-Buster(R) and standard knockout punches and 10 gauge (3.5 mm) stainless steel with Greenlee Slug-Splitter SCTM knockout punches. Driver Only and Driver with Slug-Buster (R) Punches 70-71 Quick Draw(R) Hydraulic Driver * Quick Draw driver is perfect for fast, straight-on panel punching. Quick Draw 90(R) Hydraulic Driver * Quick Draw 90 right-angle design allows greater versatility in tight spaces. Driver with Speed PunchTM Punches 60-61 Driver Only and Driver with Slug-Buster (R) Punches 72-73 Knockout Punch Driver Selection Guide Driver Type Battery-Powered Driver (18V Li-Ion Battery) USA * Develops 8 tons of hydraulic force for easy punching. * Punches up through 10 gauge (3.5 mm) mild steel with Greenlee Speed PunchTM, Slug-Buster(R) and standard knockout punches and 10 gauge (3.5 mm) stainless steel with Greenlee Slug-Splitter SCTM knockout punches. Quick Draw(R) Flex Hydraulic Driver * Quick Draw Flex allows unlimited driver orientation. High Leverage Ratchet Driver * Time saving ball bearing head punches faster than wrench method. * Punches up through 10 gauge (3.5 mm) mild steel with Greenlee Speed PunchTM, Slug-Buster(R) and standard knockout punches and 16 gauge (1.5 mm) stainless steel with Greenlee Slug-Splitter SCTM knockout punches. Driver Only and Driver with Slug-Buster (R) Punches 74 Manual Ratchet Driver * Unique punch profile splits slugs allowing easy slug removal. * 1" Hex Ratchet Wrench allows use with both 3/8" (19.1 mm) and 3/4" (9.5 mm) draw studs. * Slug-Buster(R) Punches available in sizes up thru 2.52" (64.0 mm). * Standard round punches available up to 5 5/8" (144.1 mm). Driver with Slug-Buster (R) Punches 75 Driver with Slug-Buster (R) Metric Punches Driver with Standard Metric Punches 77 PHONE 800.435.0786 FAX 800.451.2632 CANADA PHONE 866.384.8813 FAX 800.524.2853 INT'L PHONE +1.815.397.7070 FAX +1.815.397.9247 85 www.greenlee.com 59 Knockouts SPEED PUNCH TM Knockouts Speed PunchTM Knockout System SAVE TIME AND MONEY WITH EVERY PUNCH! From the leaders in knockout technology comes the new SPEED PUNCHTM System. The patent pending "no-thread" design eliminates cross-threading, while the innovative SPEED LOCK mechanism quickly secures the punch in place. This means longer tool life and faster punches, saving you time and money on the job. SPEED PUNCHTM is available in 3/4" - 2" conduit sizes and three kit configurations. * Punch up to 10 gauge mild steel, aluminum, fiberglass or plastic. * Use with hydraulic and battery-powered drivers. * Available in 3/4" - 2" conduit sizes and three kit configurations. A product video is available, scan this QR code or visit: SPECIFICATIONS www.youtube.com/GreenleeDEMO Capacity Application Hole Sizes Operation Mild steel up through 10 gauge (3.5 mm) Mild steel, fiberglass and plastic enclosures. Conduit Sizes - Hole size is outside diameter of US conduit sizes. Example: 3/4" conduit size actually makes a 1-3/32" hole. Pg Sizes - European standard pipe sizes. ISO Sizes - International Standards Organization pipe sizes. Operate with battery, hydraulic driver only. "No-thread" punch design quickly and easily slides on/ off draw stud: The fastest punch system on the market today. * Compared to standard threaded punch & draw stud set-up and disassembly. It's as simple as: 1 SLIDE Slide die and punch onto draw stud: "No-thread" design eliminates crossthreading. 2 3 Secure SPEED LOCK onto draw stud: Faster setup and disassembly. TRUSTED 60 SECURE SINCE 1862 USA PHONE 800.435.0786 FAX 800.451.2632 PUNCH Punch hole: Save time and money with every punch! CANADA PHONE 866.384.8813 FAX 800.524.2853 INT'L PHONE +1.815.397.7070 FAX +1.815.397.9247 = Replacement Part = new product = Accessory B = Bare tool Speed PunchTM Knockout System 7906SBSP LS50L11SP HOLE SIZE CAT. NO. UPC NO. DESCRIPTION CAPACITY MILD STEEL ACTUAL CONDUIT & PIPE SIZE LS50L11SP/ 01081 7906SBSP/ 09278 7905SBSP/ 01081 O mm GA mm 7212SP-3/4P 00952 Punch, 3/4" Conduit, Speed Punch 3/4" - 1.115 28.3 10 3.5 7212SP-1P 00953 1" - 1.362 34.6 10 3.5 7212SP-1-1/4P 00955 1-1/4" 1-11/16" 1.701 43.2 10 3.5 7212SP-1-1/2P 09282 1-1/2" 1-15/16" 1.951 49.6 10 3.5 7212SP-2P 09283 2" 2-3/8" 2.416 61.5 10 3.5 7212SP-3/4D 09279 3/4" - 1.115 28.3 10 3.5 7212SP-1D 09280 1" - 1.362 34.6 10 3.5 7212SP-1-1/4D 09281 1-1/4" 1-11/16" 1.701 43.2 10 3.5 7212SP-1-1/2D 00956 1-1/2" 1-15/16" 1.951 49.6 10 3.5 7212SP-2D 00957 2" 2-3/8" 2.416 61.5 10 3.5 SP-LOCK 09277 Punch, 1" Conduit, Speed Punch Punch, 1-1/4" Conduit, Speed Punch Punch, 1-1/2" Conduit, Speed Punch Punch, 2" Conduit, Speed Punch Die, 3/4" Conduit, Speed Punch Die, 1" Conduit, Speed Punch Die, 1-1/4" Conduit, Speed Punch Die, 1-1/2" Conduit, Speed Punch Die, 2" Conduit, Speed Punch Speed Lock 7212SP11 10002 7212SP12* 00979 34403 34403 - - O INCH 7905SBSP Draw Stud, 3/4" X 4.77", Speed Punch Draw Stud, 3/4" X 5.63", Speed Punch Kwik-Stepper #3 Step Bit Plastic Case 33786 33786 52178 52178 Quick Draw 90 Punch Driver 120V Charger 52177 52177 18V 1.5 Ah Li-Ion Battery LS50LB 01131 KK50LFLEX 00185 LS50 Punch Driver and Case Only (No Battery, Charger, or accessories) LS50 Plastic Case Only *For use with 746 Hydrauluc RAM USA PHONE 800.435.0786 FAX 800.451.2632 CANADA PHONE 866.384.8813 FAX 800.524.2853 INT'L PHONE +1.815.397.7070 FAX +1.815.397.9247 www.greenlee.com 61 Knockouts ELECTRIC & BATTERY-POWERED KNOCKOUT KITS LS50L Battery-Powered Knockout Punch Driver * Punch holes from any angle with the 360 rotating head. * Punches up to 6" holes in 14 gauge mild steel and 2" holes in 14 gauge stainless steel. * Slim, compact and lightweight design for reduced fatigue and easy control. * Automatic retraction prevents damage to punch and die. * One trigger controls all tool functions, no additional manual work required. * Non-slip rubber grip for firm and comfortable hold. * LED light illuminates dark work areas. AVAILABLE AS BARE TOOL SPECIFICATIONS Weight (driver with battery) Maximum Punch Force Charging Time Battery Voltage A product video is available, scan this QR code or visit: B Cat. No. UPC No. LS50L11A 04951 LS50L11B 04956 LS50LB 01131 www.youtube.com/GreenleeDEMO 5.05 lbs (2.29kg) 6 Tons (60kN) 22 min (RAL2/BL1380) or 15 min (RAL1/BL1815) 18V Description Punching Tool Kit Includes: LS50L Battery Driver, (1) 18V Li-ion Battery, (1) 120V Battery Charger, (1) Spacer (1924AA), (1) 3/4-16 x 4 Drawstud (31872). (1) 3/8 x 4.8 Drawstud (209633) Punching Tool Kit Includes: LS50L Battery Driver, (1) 18V Li-ion Battery, (1) 120V Battery Charger, (1) Spacer (1924AA), (1) 3/4-16 x 4 Drawstud (31872). (1) 3/8 x 4.8 Drawstud (209633), Slugbuster punches and dies for (1/2", 3/4", 1", 1-1/4", 1 1/2" and 2") conduit LS50 punch driver and case only (no battery, charger, or accessories). DRAW STUDS AND MISC. PUNCHES AND DIES Battery-Powered Knockout Punch Driver Kits Parts List CAT NO. UPC NO. 721-1/2 31756 DESCRIPTION 1/2" Conduit Size Slug-Buster(R) Punch HOLE SIZE CONDUIT ACTUAL & PIPE o INch SIZE 1/2" 7/8 14722 14722 1/2" Conduit Size Die 1/2" 7/8 0.885 22.5 721-3/4 31757 3/4" Conduit Size Slug-Buster(R) Punch 3/4" -- 1.115 28.3 124AV 06972 3/4" Conduit Size Die 3/4" -- 1.115 28.3 721-1 31758 1" Conduit Size Slug-Buster(R) Punch 1" -- 1.362 34.6 126AV 04011 1" Conduit Size Die 1" -- 1.362 34.6 721-1-1/4 31759 1-1/4" Conduit Size Slug-Buster(R) Punch 1-1/4" 1-11/16 1.701 43.2 128AV 04013 1-1/4" Conduit Size Die 1-1/4" 1-11/16 1.701 43.2 721-1-1/2 31760 1-1/2" Conduit Size Slug-Buster(R) Punch 1-1/2" 1-15/16 1.951 49.6 440AV 04061 1-1/2" Conduit Size Die 1-1/2" 1-15/16 1.951 49.6 721-2 31761 2" Conduit Size Slug-Buster(R) Punch 2" 2-3/8 2.416 61.5 442AV 04063 2" Conduit Size Die 2" 2-3/8 2.416 61.5 1614SS 30043 Draw Stud - 3/8" x 2-13/16" 31872 31872 Draw Stud - 3/4" x 4-1/8" 1924AA 03248 Spacer Short 33967 33967 Stud Adapter - 3/8" TRUSTED 62 SINCE 1862 USA PHONE 800.435.0786 FAX 800.451.2632 0.885 o MM 22.5 CANADA KIT CAT./UPC NO. LS50L11A LS50L11B LS60LA11 LS60LB11 LS60LA120 LS60LB120 PHONE 866.384.8813 FAX 800.524.2853 INT'L PHONE +1.815.397.7070 FAX +1.815.397.9247 = Replacement Part = new product = Accessory B = Bare tool LS60L Battery-Powered Knockout Punch Driver Kits * State of the art 18V lithium ion (Li-ion) battery provides 70% more cycles per charge and faster cycle times. * LED light provides the operator with the battery charge and tool maintenance status. * Forward handle position improves tool balance. * One trigger controls all tool functions. * Punching cycle stops automatically when hole is complete to prevent damage to punch * Overmolded tacky grip areas make gripping the tool easier and more comfortable. * LED work light illuminates dark work areas. * Greenlee battery-powered punching tools now use bio-degradable oil. * Smart chargers control the charging current, charging voltage and battery temperature to maximize battery life * Available with 120V battery charger or with 120V corded adapter in place of batteries and charger LS60LA11 SPECIFICATIONS Cat. No. Weight (driver with battery only) Overall Length (ram retracted) Height Maximum Punch Force Maximum Round Punch Size (in 10 gauge mild steel) Maximum Square Punch Size (in 10 gauge mild steel) Maximum Rectangular Punch Size (in 10 gauge mild steel) Maximum Ram Travel Charging Time Battery Voltage 8.8 lbs. (4.0 kg) 11.5 in. (292 mm) UPC No. Description 12.5 in. (318 mm) 6.7 tons (60 kN) 2.42 in. dia. (61.5 mm dia) LS60LA11 LS60LB11 LS60LA120 LS60LB120 KKLS60LGL 52176 12274 12274 Strap 2-11/16 in. x 2-11/16 in. (68.0 x 68.0 mm) 52178 52178 120V Charger 52179 52179 230V Charger 52180 52180 12V Charger 1.378 x 2.559 in. (35.0 x 65.0 mm) 0.87 in (22 mm) Approximately 1 hour 18 V, 3.0Ah, Li-ion 52155 52158 52161 52163 25749 52176 Battery Punch Driver -120 Volt Charger Battery Punch Driver -120 Volt Charger Punch Driver - 120 Volt AC Adapter Punch Driver - 120 Volt AC Adapter Carry Case 18V, 3.0Ah, Li-ion Battery See kit contents on page 62. steel capacities for conduit sizes Stud and Accessories Slug-Splitter SCTM 1/2" 3/4" 1-7/32" 1" 1-1/4" 1-1/2" 2" 1/2" 3/4" conD. conD. conD.. conD. conD. conD. conD. conD. conD. 1-7/32" 1" 1-1/4" 1-1/2" 2" conD. conD. conD. conD. o 1.951" 49.6mm o 2.416" 61.5mm o 0.885" o 1.115" o 1.210" o 1.362" o 1.701" o 1.951 o 2.415" o 0.885" o 1.115" o 1.210" o 1.362" o 1.701" 22.5mm 28.3mm 30.5mm 34.6mm 43.2mm 49.6mm 61.5mm 22.5mm 28.3mm 30.5mm 34.6mm 43.2mm 1614SS Draw Stud 1924AA Spacer 33967 Adapter 1924AA Spacer 1 29451 7/16" Draw Stud 1924AA Spacer 31872 3/4" Draw Stud 31872 3/4" Draw Stud Electronic Connector Punches RS-232, 229, 231, 234, 238 Standard Punches and Slug-Buster(R) 33967 Adapter 1 29451 sold separately. See page 94 for ordering information. USA 10 Ga. (0.1345" [3.5 mm]) Mild Steel 10 Ga. (0.1345" [3.5 mm]) Stainless Steel 12 Ga. (0.1046" [2.5 mm]) Stainless Steel 16 Ga. (0.0598" [1.5 mm]) Mild Steel and 1/8" Aluminum PHONE 800.435.0786 FAX 800.451.2632 CANADA PHONE 866.384.8813 FAX 800.524.2853 INT'L PHONE +1.815.397.7070 FAX +1.815.397.9247 www.greenlee.com 63 Knockouts SLUG-SPLITTER SCTM KNOCKOUT KITS Slug-Splitter SCTM Ram and Hand Pump Hydraulic Driver Punch Kits All Kits Feature: * Slug-Splitter SCTM (Self Centering) knockout punches with capacities up through 10 gauge (3.5 mm) stainless steel. Refer to individual punch capacity ratings. * Self-centering punch aligns itself on pilot hole. (Slug-Splitter SCTM) * No need to draw crosshairs or line up die alignment marks. (Slug-Splitter SCTM) Designed for stainless steel applications 7506 Kit Features * Fast, easy and simple to operate. * Compact design makes this a perfect choice for use on construction sites and maintenance jobs. * Will also drive 751 Cable Cutter head. * Powerful 11-ton hydraulic ram. * 3-foot hose. SPECIFICATIONS Operation 7506 Punch Kit 7307/29528 - Quick Draw(R), Quick Draw 90(R) and Quick Draw(R) Flex Hydraulic Drivers, Battery-Powered Drivers, 7646 and 7625 Ram-Type Drivers. 744/29619 - Quick Draw(R), Quick Draw 90(R) and Quick Draw(R) Flex Hydraulic Drivers, Battery-Powered Drivers, 7646 and 7625 Ram-Type Drivers. 7506/30385 - Hydraulic Ram and Hand Pump included. Weight 7307 Punch Kit (driver not included) Cat. No. UPC No. Description Lbs. kg. 744 29619 5 2.3 7307 29528 10.4 4.7 7506 30385 1/2" through 1-1/4" Conduit Size Slug-Splitter SC Knockout Punch Kit 1/2" through 2" Conduit Size Slug-Splitter SCTM Knockout Punch Kit 1/2" through 2" Conduit Size Slug-Splitter SCTM Knockout Punch Kit with Hydraulic Ram and Hand Pump 32 14.5 NOTE: See Slug-Splitter SCTM knockout punch units on pages 82-83 for list of individual punches, dies and draw studs. 744 Punch Kit (driver not included) TRUSTED 64 SINCE 1862 USA PHONE 800.435.0786 FAX 800.451.2632 CANADA PHONE 866.384.8813 FAX 800.524.2853 INT'L PHONE +1.815.397.7070 FAX +1.815.397.9247 = Replacement Part = new product = Accessory B = Bare tool Hole Size Cat. No. UPC No. 28154 28155 28156 28157 36490 36489 28158 28159 28160 28161 28162 28163 28165 28166 29451 29452 29529 19193 31068 746SS 28154 28155 28156 28157 36490 36489 28158 28159 28160 28161 28162 28163 28165 28166 29451 29452 29529 19193 31068 30387 54167 54168 15908 54167 54168 15908 1924AA 1925AA 1926AA 767 38316 03248 03249 06904 13284 38316 54169 54170 06302 54169 54170 06302 USA PHONE 800.435.0786 FAX 800.451.2632 Conduit & Actual Description Pipe Size 1/2" Conduit Size Punch 1/2" Conduit Size Die 3/4" Conduit Size Punch 3/4" Conduit Size Die 1-7/32" Punch Oiltight 1-7/32" Die Oiltight 1" Conduit Size Punch 1" Conduit Size Die 1-1/4" Conduit Size Punch 1-1/4" Conduit Size Die 1-1/2" Conduit Size Punch 1-1/2" Conduit Size Die 2" Conduit Size Punch 2" Conduit Size Die 7/16" x 4-1/4" Draw Stud 3/4" x 5-1/2" Draw Stud Metal Case Metal Case Metal Case Ram (includes 1 each of the following 3 items) 1/4" Female Coupler Dust Plug Spacer Group (includes 1 each of the following 3 items) Spacer-Short Spacer-Medium Spacer-Long Hydraulic Hand Pump High Pressure Hose Unit-1/4" x 3' (includes 1 each of the following 3 items) 1/4" Male Coupler Dust Cap High Pressure Hose-1/4" x 3' 1/2" 1/2" 3/4" 3/4" -- -- 1" 1" 1-1/4" 1-1/4" 1-1/2" 1-1/2" 2" 2" o inch 7/8 7/8 -- -- 1-7/32 1-7/32 1-11/32 1-11/32 1-11/16 1-11/16 1-15/16 1-15/16 2-3/8 2-3/8 CANADA PHONE 866.384.8813 FAX 800.524.2853 Capacity Stainless Steel .885 .885 1.115 1.115 1.210 1.210 1.362 1.362 1.701 1.701 1.951 1.951 2.416 2.416 o mm 22.5 22.5 28.3 28.3 30.5 30.5 34.6 34.6 43.2 43.2 49.6 49.6 61.5 61.5 GA 10 10 10 10 10 10 10 10 10 10 10 10 10 10 mm 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 Kit Cat./UPC No. 744/ 7307/ 7506/ 29619 29528 30385 INT'L PHONE +1.815.397.7070 FAX +1.815.397.9247 www.greenlee.com 65 Knockouts KNOCKOUTS for stainless steel Slug-Splitter SCTM and Slug-Splitter Knockout Punches * Slug-Splitter SCTM heavy-duty punches are designed to punch up through 10 gauge (3.5 mm) stainless steel. * Unique slug-splitting design and tool steel construction easily punch 10 gauge (3.5 mm) mild steel and stainless steel. * Self-centering punch aligns itself on pilot hole. (Slug-Splitter SCTM) * No need to draw crosshairs or line up die alignment marks. (Slug-Splitter SCTM) * Unique punch profile also splits slugs for easier slug removal. * Heavy-duty dies and stainless steel draw studs for longer life. * Excellent abrasion resistance for punching fiberglass and plastic. * Slug-Splitter SCTM punch units consist of: punch, die and draw stud. Check individual punch for specific capacity. * Patent Pending for Self-centering Slug-Splitter SCTM. SPECIFICATIONS Capacity Application Hole Sizes Slug is split in half as punching operation is completed. Unique Slug-Splitter SCTM punch design creases slug as the punch is drawn into the die. Split slugs fall free from the die and stud. Operation Stainless steel up through 10 gauge (3.5 mm) 10-gauge stainless steel, mild steel, fiberglass and plastic enclosures. Conduit Sizes - Hole size is outside diameter of US conduit sizes. Example: 1/2" conduit size actually makes a 7/8" hole. Pg Sizes - European standard pipe sizes. ISO Sizes - International Standards Organization pipe sizes. Operate with battery, hydraulic or high leverage ratchet driver only. self centering - Slug-splitter scTM knockout punches 0.885" to 2.416" Hole Size Punch Die Cat./UPC No. Cat/UPC No & Pipe o (inch) 28154 28155 1/2" 7/8 28156 28157 3/4" - 36490 36489 - 28158 28159 28160 28162 28165 Conduit Capacity Actual Draw Studs Stainless Steel Hydraulic Drivers Ratchet Driver o (mm) Pg ISO GA. (mm) 7804/7904 7646/7625 1904 0.885 22.5 16 - 10 3.5 29451 29451 30227 1.115 28.3 21 - 10 3.5 31872 29452 12099 1-7/32 1.210 30.5 - - 10 3.5 31872 29452 12099 1" 1-11/32 1.352 34.6 - - 10 3.5 31872 29452 12099 28161 1-1/4" 1-11/16 1.701 43.2 - - 10 3.5 31872 29452 12099 28163 1-1/2" 1-15/16 1.951 49.6 - - 10 3.5 - 29452 12099 28166 2" 2-3/8 2.416 61.5 - - 10 3.5 - 29452 12099 Standard - Slug-Splitter Knockout Punches 0.598" to 2.520" 31117 04599 31126 04598 - - 0.598 0.638 15.2 16.2 9 - 16 - 12 12 2.5 2.5 29451 29451 29451 29451 30227 30227 31119 31128 - - 0.732 18.6 11 - 12 2.5 29451 29451 30227 31120 31129 - - 0.803 20.4 13 20 12 2.5 29451 29451 30227 04602 04601 - 1 1.000 25.4 - 25 10 3.5 31872 29451 30227 04605 04603 - - 1.280 32.5 - 32 10 3.5 31872 29452 12099 31122 31135 - - 1.457 37.0 29 - 10 3.5 31872 29452 12099 04608 04607 - - 1.595 40.5 - 40 10 3.5 31872 29452 12099 31123 31131 - - 1.850 47.0 36 - 10 3.5 - 29452 12099 04611 04609 - 2 2.000 50.8 - 50 10 3.5 - 29452 12099 31124 31132 - 2 1/8 2.125 54.0 42 - 10 3.5 - 29452 12099 31125 31133 - - 2.362 60.0 48 - 10 3.5 - 29452 12099 04614 04613 - - 2.520 64.0 - 63 10 3.5 - 29452 12099 *16 ga. stainless steel capacity with ratchet driver. TRUSTED 66 SINCE 1862 USA PHONE 800.435.0786 FAX 800.451.2632 CANADA PHONE 866.384.8813 FAX 800.524.2853 INT'L PHONE +1.815.397.7070 FAX +1.815.397.9247 = Replacement Part = new product B = Accessory = Bare tool Slug-Splitter SCTM and Slug-Splitter Knockout Punches Punch Units self centering - Slug-splitter scTM knockout punches 0.885" to 2.416" PUNCH UNIT - INCLUDES Punch, Die & Draw CAPACITY Stainless Steel Weight Driver Draw Stud MM GA MM LBS. kg 1904 745R-1/2 745H-1/2 30384 29560 1/2" 1/2" 7/8 7/8 22.5 22.5 16 10 1.5 3.5 .6 .7 .27 .32 x 740H-1-7/32 Oil Tight 745H-3/4 29563 - 1-7/32 30.5 10 3.5 1.2 .54 12318 3/4" 1-3/32 28.3 10 3.5 1.26 .57 x 29452 745H-1 12319 1" 1-11/32 34.6 10 3.5 1.51 .68 x 29452 745H-1-1/4 12320 1-1/4" 1-11/16 43.2 10 3.5 1.96 .89 x 29452 745H-1-1/2 12321 1-1/2" 1-15/16 49.6 10 3.5 2.49 1.13 x 29452 745H-2 12322 2" 2-3/8 61.5 10 3.5 3.69 1.67 x 29452 Catalog No. UPC No Hole Size Conduit & Pipe Size IN 7804/7904 LS60* 7646/7625 x x x 30227 29451 x x x 29452 Standard - Slug-Splitter Knockout Punches 0.598" to 2.520" 745M-15.2 12323 - 0.598 15.2 12 2.5 .98 .44 x 29451 745M-16.2 12324 - 0.638 16.2 12 2.5 .97 .44 x 29451 745M-18.6 12325 - 0.732 18.6 12 2.5 .98 .45 x 29451 745M-20.4 12326 - 0.803 20.4 12 2.5 .96 .44 x 29451 745M-25.4 12317 - 1.000 25.4 10 3.5 1.05 .48 x 29451 745M-32.5 12327 - 1.280 32.5 10 3.5 1.53 .69 x 29452 745M-37 12328 - 1.457 37 10 3.5 1.68 .76 x 29452 745M-40.5 12329 - 1.595 40.5 10 3.5 1.83 .83 x 29452 745M-47 12330 - 1.850 47 10 3.5 2.3 1.04 x 29452 745M-50.8 12331 - 2.000 50.8 10 3.5 2.91 1.32 x 29452 745M-54 12332 - 2.125 54 10 3.5 2.90 1.31 x 29452 745M-60 12333 - 2.362 60 10 3.5 3.63 1.65 x 29452 745M-64 12334 - 2.520 64 10 3.5 3.87 1.75 x 29452 *Battery-Powered or Corded Knockout Punch Driver Large Diameter Knockouts for Stainless Steel cat no. 7308 * Makes clean & accurate holes. * For conduit sizes 2-1/2", 3", 3-1/2" & 4". * Rated for punching in up to 10 gauge stainless steel. * Excellent abrasion resistance for punching fiberglass and plastic. * Kit includes punches, dies, draw stud and sleeve. * High-Impact, rugged plastic carrying case (kit only). USA PHONE 800.435.0786 FAX 800.451.2632 CANADA PHONE 866.384.8813 FAX 800.524.2853 INT'L upc no. 7308 06176 745H-2-1/2 06183 745H-3 06190 745H-3-1/2 06206 745H-4 06213 1557SS 00622 00626 00623 00627 00624 00629 00625 00630 00785 00622 00626 00623 00627 00624 00629 00625 00630 PHONE +1.815.397.7070 FAX +1.815.397.9247 description Kit Includes: Punches and Dies for 2-1/2", 3" & 4" Conduit, Draw Stud (29452), Sleeve (1557SS) and Case Punch Unit for 2-1/2" Conduit Includes: Punch, Die & Draw Stud (29452) Punch Unit for 3" Conduit Includes: Punch, Die & Draw Stud (29452) Punch Unit for 3-1/2" Conduit Includes: Punch, Die & Draw Stud (29452) Punch Unit for 4" Conduit Includes: Punch, Die & Draw Stud (29452) Hydraulic Punch Sleeve (SS) 2-1/2" Replacement Punch 2-1/2" Replacement Die 3" Replacement Punch 3" Replacement Die 3-1/2" Replacement Punch 3-1/2" Replacement Die 4" Replacement Punch 4" Replacement Die www.greenlee.com 67 Knockouts SLUG-Buster(R) Hydraulic KNOCKOUT KITS Slug-Buster(R) Ram and Hand Pump Kits (Inch and Metric) * Fast, easy and simple to operate. * Compact design for field use on construction sites and maintenance jobs. * Punches 10 times faster than wrench method. * Will also drive 751 Cable Cutter head. * Can be used with most standard round Slug-Buster(R) and Slug-Splitter SCTM punches (not 1/2", 9/16", 5/8"). * Can be used with non-round punches (adapter may be required). * 3-foot hose * Powerful 11-ton hydraulic ram. Weight cat no. upc no. description lbs. kg. 7646 15906 20 9.1 7306SB 34360 24 10.9 7310SB 34361 54 24.5 7646Pg-SB 32799 24 10.9 38520 38520 48 21.8 7310SB Driver with Hand Pump, Draw Studs, Spacer and Plastic Case Driver, Hand Pump, Slug-Buster(R) Punches, Dies and Draw Studs for 1/2" through 2" Conduit, Adapter, Spacers, Kwik Stepper(R) Step Bit and Plastic Case Driver, Hand Pump, Slug-Buster(R) Punches,Dies and Draw Studs for 1/2" through 2" and 2-1/2" through 4" Standard Conduit Size Punches, Dies and Draw Studs, Adapter, Spacers, Kwik Stepper(R) Step Bit and Plastic Case Metric - Driver, Slug-Buster(R) Pg Punches, Dies and Draw Studs for 15.2 mm through 60.0 mm, Adapter, Spacers, Kwik Stepper(R) Step Bit and Plastic Case Driver, Hand Pump, Slug-Buster(R) Punches and Draw Studs for 1/2" through 3" and 4" Conduit, Adapter, Spacers, Kwik Stepper(R) Step Bit and Plastic Case steel capacities for conduit sizes Standard Punches and Slug-Buster(R) REQUIRED DRAW STUD and Accessories 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" 3/4" Stud (2113B), 3/8" Stud (20963) & Spacers 3/4" Stud (2113B), Long Spacer 3/4" Stud (2113B), Short Spacer 3/4" Stud (2113B) 3/4" Stud (2113B), & Sleeve (03170) 10 GA. Mild Steel Ram and Hand Pump Hydraulic Driver Parts Identification BB F F H H G G L L KK JJ AA I R R M M N N TRUSTED 68 SINCE 1862 KEY CAT. NO. upc no. A B F G H I J K L M N R 746 2113B 1557AA 20963 15908 1924AA 1925AA 1926AA 34410 767 06302 30206 17091 10109 03170 20963 USA 03248 03249 06904 13284 06302 PHONE 800.435.0786 FAX 800.451.2632 description Ram (includes Item B) Draw Stud-3/4" x 5 3/8" Punch Sleeve Draw Stud-3/8" x 4.8" Spacer Group (includes Items I, J and K) Spacer-Short Spacer-Medium Spacer-Long Kwik Stepper(R) Step Bit 1/2" Hydraulic Hand Pump High Pressure Hose-1/4" x 3' Plastic Case CANADA PHONE 866.384.8813 FAX 800.524.2853 INT'L PHONE +1.815.397.7070 FAX +1.815.397.9247 = new product = Replacement Part B = Accessory = Bare tool Slug-Buster(R) Ram and Hand Pump Kits Parts List HOLE SIZE DRAW STUDS AND MISC. PUNCHES AND DIES CAT NO. UPC NO. CONDUIT & PIPE o INch SIZE DESCRIPTION KIT CAT./UPC NO. ACTUAL 7646/ 15906 7306SB/ 34360 7310SB/ 7646PGSB/ 34361 32799 38520 721-1/2 31756 1/2" Conduit Size Slug-Buster(R) Punch 1/2" 7/8 0.885 o MM 22.5 14722 14722 1/2" Conduit Size Die 1/2" 7/8 0.885 22.5 721-3/4 31757 3/4" Conduit Size Slug-Buster(R) Punch 3/4" -- 1.115 28.3 1 1 1 124AV 06972 3/4" Conduit Size Die 3/4" -- 1.115 28.3 1 1 1 721-1 31758 1" Conduit Size Slug-Buster(R) Punch 1" -- 1.362 34.6 1 1 1 126AV 04011 1" Conduit Size Die 1" -- 1.362 34.6 1 1 1 721-1-1/4 31759 1-1/4" Conduit Size Slug-Buster(R) Punch 1-1/4" 1-11/16 1.701 43.2 1 1 1 128AV 04013 1-1/4" Conduit Size Die 1-1/4" 1-11/16 1.701 43.2 1 1 1 721-1-1/2 31760 1-1/2" Conduit Size Slug-Buster(R) Punch 1-1/2" 1-15/16 1.951 49.6 1 1 1 440AV 04061 1-1/2" Conduit Size Die 1-1/2" 1-15/16 1.951 49.6 1 1 1 721-2 31761 2" Conduit Size Slug-Buster(R) Punch 2" 2-3/8 2.416 61.5 1 1 1 442AV 04063 2" Conduit Size Die 2" 2-3/8 2.416 61.5 1 1 1 1429AV 04175 2-1/2" Conduit Size Punch 2-1/2" 2-7/8 2.914 74.0 1 1 1430AV 04177 2-1/2" Conduit Size Die 2-1/2" 2-7/8 2.914 74.0 1 1 1431AV 04180 3" Conduit Size Punch 3" 3-1/2 3.539 89.9 1 1 1432AV 04183 3" Conduit Size Die 3" 3-1/2 3.539 89.9 1 1 2982AV 04653 3-1/2" Conduit Size Punch 3-1/2" 4 4.044 102.7 1 2981AV 04652 3-1/2" Conduit Size Die 3-1/2" 4 4.044 102.7 1 2984AV 04655 4" Conduit Size Punch 4" 4-1/2 4.544 115.4 1 2983AV 04654 4" Conduit Size Die 4" 4-1/2 4.544 115.4 1 31969 31969 Pg-9 Slug-Buster(R) Punch -- -- 0.598 15.2 32002 32002 Pg-9 Die -- -- 0.598 15.2 1 31970 31970 Pg-11 Slug-Buster(R) Punch -- -- 0.732 18.6 1 32003 32003 Pg-11 Die -- -- 0.732 18.6 1 31971 31971 Pg-13 Slug-Buster(R) Punch -- -- 0.803 20.4 1 32004 32004 Pg-13 Die -- -- 0.803 20.4 1 31973 31973 Pg-21 Slug-Buster(R) Punch 3/4" -- 1.115 28.3 1 32006 32006 Pg-21 Die 3/4" -- 1.115 28.3 1 36284 36284 Slug-Buster(R) Punch -- 1-7/32 1.210 30.5 1 36279 36279 Die -- 1-7/32 1.210 30.5 1 31975 31975 Pg-29 Slug-Buster(R) Punch -- -- 1.457 37.0 1 32008 32008 Pg-29 Die -- -- 1.457 37.0 1 31976 31976 Pg-36 Slug-Buster(R) Punch -- -- 1.850 47.0 1 32009 32009 Pg-36 Die -- -- 1.850 47.0 1 31978 31978 Pg-48 Slug-Buster Punch -- -- 2.362 60.0 1 32011 32011 Pg-48 Die -- -- 2.362 60.0 746 17091 Ram (includes following item) 1 1 1 1 1 2113B 10109 Draw Stud-3/4" x 5 3/8" 1 1 1 1 1 1557AA 03170 Punch Sleeve 1 1 1 1 1 20963 20963 Draw stud-3/8" x 4.8" 1 1 1 1 1 15908 15908 Spacer Group (includes 1 ea. of following 3 items) 1 1 1 1 1 1924AA 03248 Spacer-Short 1 1 1 1 1 1925AA 03249 Spacer-Medium 1 1 1 1 1 1926AA 06904 Spacer-Long 1 1 1 1 1 34410 34410 Kwik Stepper(R) Step Bit 1/2" 1 1 1 1 1 767 13284 Hydraulic Hand Pump 1 1 1 1 1 06302 06302 High Pressure Hose - 1/4" x 3' 1 1 1 30206 30206 Plastic Case 1 1 18402 25094 18402 25094 Steel case Tray USA PHONE 800.435.0786 FAX 800.451.2632 (R) CANADA 1 1 1 1 1 1 1 1 INT'L PHONE +1.815.397.7070 FAX +1.815.397.9247 1 1 1 1 1 1 1 PHONE 866.384.8813 FAX 800.524.2853 1 1 www.greenlee.com 69 Knockouts Slug-Buster(R) Ram and Foot Pump Hydraulic Driver Kits 7625 * Foot operation frees both hands toposition punch. * Punches 10 times faster than wrench method. * Will also drive 751 Cable Cutter head. * Powerful 11-ton hydraulic ram. * Can be used with most standard round, Slug-Buster(R) and Slug-Splitter SCTM punch sizes. (Not 1/2", 9/16" 5/8") * Can be used with non-round punches (adapter may be required). Weight cat no. upc no. description lbs. kg. 7625 25097 Driver, Foot Pump, Steel Case 37 17 7606SB 07173 42 19 7610SB 07174 Driver, Foot Pump, Slug-Buster(R) Punches, Dies and Draw Studs for 1/2" through 2"Conduit, Steel Case Driver, Foot Pump, Slug-Buster(R) Punches, Dies & Draw Studs for 1/2" through 2" Conduit, SlugBuster(R) Punches and 2 1/2" through 4" Conduit Standard Round Punches 60 27 steel capacities for conduit sizes REQUIRED DRAW STUD and Accessories Standard Punches and Slug-Buster(R) Standard 1/2" 2-1/2" 3" 3/4" 1" 1-1/4" 1-1/2" 2" Slug-Splitter SCTM 3-1/2" 4" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 3/4" Stud (2113B), 3/8" Stud (20963) & Spacers 3/4" Stud (2113B), Long Spacer 3/4" Stud (2113B), Short Spacer 3/4" Stud (2113B) 3/4" Stud (2113B), & Sleeve (03170) 7/16" Stud (29451) 3/4" Stud (29452) 10 GA. Mild Steel 10 GA. Stainless Steel TRUSTED 70 SINCE 1862 USA PHONE 800.435.0786 FAX 800.451.2632 CANADA PHONE 866.384.8813 FAX 800.524.2853 INT'L PHONE +1.815.397.7070 FAX +1.815.397.9247 = Replacement Part = new product B = Accessory = Bare tool DRAW STUDS AND MISC. PUNCHES AND DIES Ram and Foot Pump Kits Parts List DESCRIPTION HOLE SIZE CONDUIT & ACTUAL KIT CAT./UPC NO. 7625/ 7606SB/ 7610SB/ CAT NO. UPC NO. 721-1/2 31756 1/2" Conduit Size Slug-Buster(R) Punch PIPE SIZE 1/2" o INch 7/8 0.885 o MM 22.5 14722 14722 1/2" Conduit Size Die 1/2" 7/8 0.885 721-3/4 31757 3/4" Conduit Size Slug-Buster(R) Punch 3/4" -- 1.115 124AV 06972 3/4" Conduit Size Die 3/4" -- 1.115 721-1 31758 1" Conduit Size Slug-Buster(R) Punch 1" -- 1.362 34.6 1 1 126AV 04011 1" Conduit Size Die 1" -- 1.362 34.6 1 1 721-1-1/4 31759 1-1/4" Conduit Size Slug-Buster(R) Punch 1-1/4" 1-11/16 1.701 43.2 1 1 128AV 04013 1-1/4" Conduit Size Die 1-1/4" 1-11/16 1.701 43.2 1 1 721-1-1/2 31760 1-1/2" Conduit Size Slug-Buster(R) Punch 1-1/2" 1-15/16 1.951 49.6 1 1 440AV 04061 1-1/2" Conduit Size Die 1-1/2" 1-15/16 1.951 49.6 1 1 721-2 31761 2" Conduit Size Slug-Buster(R) Punch 2" 2-3/8 2.416 61.5 1 1 442AV 04063 2" Conduit Size Die 2" 2-3/8 2.416 61.5 1 1 1429AV 04175 2-1/2" Conduit Size Punch 2-1/2" 2-7/8 2.914 74.0 1 1430AV 04177 2-1/2" Conduit Size Die 2-1/2" 2-7/8 2.914 74.0 1 1431AV 04180 3" Conduit Size Punch 3" 3-1/2 3.539 89.9 1 1432AV 04183 3" Conduit Size Die 3" 3-1/2 3.539 89.9 1 2982AV 04653 3-1/2" Conduit Size Punch 3-1/2" 4 4.044 102.7 1 2981AV 04652 3-1/2" Conduit Size Die 3-1/2" 4 4.044 102.7 1 2984AV 04655 4" Conduit Size Punch 4" 4-1/2 4.544 115.4 1 2983AV 04654 4" Conduit Size Die 4" 4-1/2 4.544 115.4 746 17091 (A) Ram (includes 1 ea. of items B, C, and D) 1 1 1 2113B 10109 (B) Draw Stud-3/4" x 5 3/8" 1 1 1 54167 54167 (C) Female Coupler-1/4" 1 1 1 54168 54168 (D) Dust Plug 1 1 1 1557AA 03170 (F) Punch Sleeve 1 1 1 20963 20963 (G) Draw stud-3/8" x 4.8" 1 1 1 15908 15908 (H) Spacer Group (includes 1 ea. of items I, J, and K) 1 1 1 1924AA 03248 (I) Spacer-Short 1 1 1 1925AA 03249 (J) Spacer-Medium 1 1 1 1926AA 06904 (K) Spacer-Long 1 1 1 34410 34410 (L) Kwik Stepper(R) Step Bit 1/2" 1 1 1 1725 31353 (S) Hydraulic Foot Pump (includes 1 ea. - 54167 female coupler and 54168 dust plug) 1 1 1 37729 37729 1 1 1 54169 54169 (T) High Pressure Hose Unit - 1/4" x 10'; filled with hydraulic oil; (includes the following 2 items) Couplers 2 2 2 54170 54170 Dust Caps 2 2 2 23955 23955 (U) Steel case 1 1 1 25094 25094 Tray 1 1 1 25097 07173 1 07174 1 22.5 1 1 28.3 1 1 28.3 1 1 1 Ram and Foot Pump Hydraulic Driver Parts Identification (Match letters above to drawing.) U T S A F C C B D D USA PHONE 800.435.0786 FAX 800.451.2632 CANADA PHONE 866.384.8813 FAX 800.524.2853 INT'L PHONE +1.815.397.7070 FAX +1.815.397.9247 H G L www.greenlee.com 71 Knockouts Quick Draw(R) Hydraulic Punch Driver and Kits The Quick Draw(R), Quick Draw 90(R), and Quick Draw(R) Flex feature: * Compact, lightweight design for portability and fast, easy one-person operation. * Develops 8 tons of hydraulic force for easy punching, even in 10-gauge stainless steel, depending on individual punch capacities. * Quick Draw(R) is perfect for fast, straight-on front panel punching. * Quick Draw 90(R)'s right angle driver head rotates over 180 degrees for maximum flexibility in tight working areas. * Quick Draw(R) Flex allows unlimited driver orientation to simplify access to work area. * Can be used with non-round punches within the capacity of the tool (adapter may be required). * U.S. Patent #6,772,521. 7706SB Flex Driver Kit weight Cat. No. 7806SB Quick Draw(R) Kit 7906SB Quick Draw 90(R) Kit UPC No. Description 7704SB 10475 7706SB 10476 7804SB 34292 7806SB 34293 7804E 34291 7804ESB 35611 7804ISO 35614 7904SB 33794 7906SB 34300 7904E 34299 7904ESB 35615 7904ISO 35616 34983 34983 Quick Draw(R) Flex Driver, 2 Draw Studs, 1 Adapter, 1 Spacer and Case Standard - Quick Draw(R) Flex Driver, 1/2" through 2" Slug-Buster(R) Conduit Size Punches and Dies, 2 Draw Studs, 1 Adapter, 1 Spacer and Case Quick Draw(R) Driver, 2 Draw Studs, 1 Adapter, 1 Spacer and Case Standard - Quick Draw(R) Driver, 1/2" through 2" Slug-Buster(R) Conduit Size Punches and Dies 2 Draw Studs, 1 Adapter, 1 Spacer and Case Metric - Quick Draw(R) Driver, 2 Draw Studs, 1 Adapter, 1 Spacer and Case Metric - Quick Draw(R) Driver, Slug-Buster(R) Pg Punches and Dies 15.2 mm through 30.5 mm, 2 Draw Studs, 1 Adapter, 1 Spacer and Case Metric - Quick Draw(R) Driver, Slug-Buster(R) ISO Punches and Dies 16.2 mm through 40.5 mm, 2 Draw Studs, 1 Adapter, 1 Spacer and Case Quick Draw 90(R) Driver, 2 Draw Studs, 1 Adapter, 1 Spacer and Case Quick Draw 90(R) Driver, 1/2" through 2" SlugBuster(R) Conduit Size Punches and Dies, Draw Studs, 1 Adapter, 1 Spacer and Case Metric - Quick Draw 90(R) Driver, 2 Draw Studs, 1 Adapter, 1 Spacer and Case Metric - Quick Draw 90(R) Driver, Slug-Buster(R) Pg Punches and Dies 15.2 mm through 30.5 mm, 2 Draw Studs, 1 Adapter, 1 Spacer and Case Metric - Quick Draw 90(R) Driver, Slug-Buster(R) ISO Punches and Dies 16.2 mm through 40.5 mm, 2 Draw Studs, 1 Adapter, 1 Spacer and Case Plastic Case lbs. kg. 12.1 5.5 17.3 7.9 10 4.5 14 6.4 9.4 4.3 10.3 4.7 11.4 5.2 10 4.5 14 6.4 11 5.0 11 5.0 12.2 5.5 steel capacities for conduit sizes Standard Punches and Slug-Buster(R) REQUIRED DRAW STUD AND Accessories 1/2" 3/4" 1-7/32" OILTIGHT Slug-Splitter SCTM 1" 1-1/4" 1-1/2" 2" 1/2" 3/4" 1-7/32" OILTIGHT 1-1/4" 3/8" Draw Stud Spacer & 7/16" Draw Stud Spacer & 3/4" Draw Stud 3/4" Draw Stud 10 GA. Mild Steel 10 GA. Stainless Steel TRUSTED 72 SINCE 1862 USA PHONE 800.435.0786 FAX 800.451.2632 CANADA PHONE 866.384.8813 FAX 800.524.2853 INT'L PHONE +1.815.397.7070 FAX +1.815.397.9247 = Replacement Part = new product B = Accessory = Bare tool Parts List for Quick Draw(R), Quick Draw 90(R) and Quick Draw(R) Flex Kits HOLE SIZE CAT UPC NO. DRAW STUDS AND MISC. PUNCHES AND DIES NO. 721-1/2 31756 14722 14722 721-3/4 31757 124AV 06972 721-1 31758 126AV 04011 721-1-1/4 31759 128AV 04013 KIT CAT./UPC NO. CONDUIT & PIPE SIZE o INch 1/2" Conduit Size Slug-Buster(R) Punch 1/2" Conduit Size Die 3/4" Conduit Size Slug-Buster(R) Punch 3/4" Conduit Size Die 1/2" 7/8 0.885 22.5 1/2" 3/4" 7/8 -- 0.885 1.115 22.5 28.3 3/4" -- 1.115 28.3 1" Conduit Size Slug-Buster(R) Punch 1" Conduit Size Die 1" -- 1.362 34.6 1" -- 1.362 34.6 1-1/4" Conduit Size SlugBuster(R) Punch 1-1/4" Conduit Size Die 1-1/4" 1-11/16 1.701 43.2 1-1/4" 1-11/16 1.701 43.2 1-1/2" 1-15/16 1.951 49.6 DESCRIPTION ACTUAL o MM 7704SB/ 7706SB/ 7804E/ 7804ESB/ 7804ISO/ 7804SB/ 7806SB/ 7904E/ 7904ESB/ 7904ISO/ 7904SB/ 7906SB/ 10475 10476 34291 35611 35614 34292 34293 34299 35615 35616 33794 34300 721-1-1/2 31760 1-1/2" Conduit Size SlugBuster(R) Punch 440AV 04061 1-1/2" Conduit Size Die 1-1/2" 1-15/16 1.951 49.6 2" 2-3/8 2.416 61.5 721-2 31761 442AV 04063 2" Conduit Size Slug-Buster(R) Punch 2" Conduit Size Die 2" 2-3/8 2.416 61.5 31696 31696 Pg-9 Slug-Buster(R) Punch -- -- 0.598 74.0 32002 32002 Pg-9 Die -- -- 0.598 74.0 31970 31970 Pg-11 Slug-Buster(R) Punch -- -- 0.732 89.9 32003 32003 Pg-11 Die -- -- 0.732 89.9 31971 31971 Pg-13 Slug-Buster(R) Punch -- -- 0.803 102.7 32004 32004 Pg-13 Die -- -- 0.803 102.7 31973 31973 Pg-21 Slug-Buster(R) Punch 3/4" -- 1.115 115.4 32006 32006 Pg-21 Die 3/4" -- 1.115 115.4 30.5 mm Slug-Buster(R) Punch 30.5 mm Die -- 1-7/32 1.210 30.5 -- 1-7/32 1.210 30.5 ISO-16 Slug-Buster(R) Punch ISO-16 Die -- -- 0.638 16.2 -- -- 0.638 16.2 ISO-25 Slug-Buster(R) Punch ISO-25 Die -- 1 1.000 25.4 -- 1 1.000 25.4 ISO-32 Slug-Buster(R) Punch ISO-32 Die -- -- 1.280 32.5 -- -- 1.280 32.5 ISO-40 Slug-Buster(R) Punch ISO-40 Die -- -- 1.595 40.5 -- -- 1.595 40.5 36284 36284 36279 36279 35163 35163 35162 35162 35165 35165 35164 35164 35169 35169 35168 35168 35158 35158 35159 35159 10383 10383 Quick Draw(R) Hydrualic Punch Driver Quick Draw 90(R) Hydrualic Punch Driver Quick Draw(R) Flex Driver 1614SS 30043 Draw Stud - 3/8" x 2-13/16" 31872 Draw Stud - 3/4" x 4-1/8" 03248 Spacer - Short 33967 Stud Adapter - 3/8" 35202 35202 Plastic Case 34983 34983 Plastic Case 10391 10391 Plastic Case 34288 34288 33796 33796 31872 1924AA 33967 Optional Accessories for 7806SB, 7804E, 7804ESB, 7804ISO, 7906SB, 7904E, 7904ESB and 7904ISO Kits (not included in kits) Cat. No. 29451 USA UPC No. Description 29451 PHONE 800.435.0786 FAX 800.451.2632 7/16" (11.1 mm) Stainless Steel Draw Stud CANADA PHONE 866.384.8813 FAX 800.524.2853 INT'L PHONE +1.815.397.7070 FAX +1.815.397.9247 www.greenlee.com 73 Knockouts SLUG-BUSTER(R) KNOCKOUT KITS Slug-Buster(R) Ratchet Punch Driver Kits * Time-saving ball bearing head punches faster than wrench method. * Requires less than half the force of conventional ratchet drivers. * Punches up through 10 gauge (3.5 mm) mild steel with Greenlee Standard and Slug-Buster(R) punches; and 16 gauge (1.5 mm) stainless steel with Greenlee Slug-Splitter SCTM punches. * Ratchet action allows for use in confined areas. * Unique design eliminates stud rotation during punching - lowers the strain on studs. * Steel carrying case. 1904 weight cat no. upc no. description lbs. kg. 1904 30216 Basic High Leverage Ratchet Driver with Three Draw Studs and Case 14 6.4 1906SB 34357 High Leverage Ratchet Driver with 1/2" through 2" Slug-Buster(R) Conduit Size Punches, Dies, Draw Studs and Case 20 9.1 Hole Size Kit Cat./UPC No. CONDUIT & PIPE DRAW STUDS AND MISC. PUNCHES AND DIES Cat. No. UPC No. Description Size 1904/ 1906SB/ MIld Steel 30216 34357 721-1/2 31756 1/2" Conduit Size Slug-Buster(R) Punch 1/2" O inch 7/8 14722 14722 1/2" Conduit Size Die 1/2" 7/8 0.885 22.5 10 3.5 721-3/4 31757 3/4" Conduit Size Slug-Buster(R) Punch 3/4" -- 1.115 28.3 10 3.5 124AV 06972 3/4" Conduit Size Die 3/4" -- 1.115 28.3 10 3.5 721-1 31758 1" Conduit Size Slug-Buster(R) Punch 1" -- 1.362 34.6 10 3.5 126AV 04011 1" Conduit Size Die 1" -- 1.362 34.6 10 3.5 721-1-1/4 31759 1-1/4" Conduit Size Slug-Buster(R) Punch 1-1/4" 1-11/16 1.701 43.2 10 3.5 128AV 04013 1-1/4" Conduit Size Die 1-1/4" 1-11/16 1.701 43.2 10 3.5 721-1-1/2 31760 1-1/2" Conduit Size Slug-Buster Punch 1-1/2" 1-15/16 1.951 49.6 10* 3.5 440AV 04061 1-1/2" Conduit Size Die 1-1/2" 1-15/16 1.951 49.6 10* 3.5 721-2 31761 2" Conduit Size Slug-Buster(R) Punch 2" 2-3/8 2.416 61.5 10* 3.5 442AV 04063 2" Conduit Size Die 2" 2-3/8 2.416 61.5 10* 3.5 12097 12097 Draw Stud - 3/8" x 3-1/2" 12099 12099 Draw Stud - 3/4" x 4-3/4" 30227 30227 Draw Stud - 7/16" x 3-5/8" 30228 30228 Steel Case 20495 20495 Ratchet wrench only 30225 30225 Handle (R) TRUSTED 74 Actual CAPACITY SINCE 1862 USA PHONE 800.435.0786 FAX 800.451.2632 0.885 O MM GA 22.5 10 MM 3.5 CANADA PHONE 866.384.8813 FAX 800.524.2853 INT'L PHONE +1.815.397.7070 FAX +1.815.397.9247 = new product = Replacement Part = Accessory B = Bare tool Slug-Buster(R) Knockout Kit with Ratchet Wrench * 1" Hex Ratchet Wrench allows use with both 3/8" (9.5 mm) and 3/4" (19.1 mm) draw studs. * High-impact, rugged plastic carrying case. Capacity Mild Steel Weight cat no. 7238SB upc no. description 34757 1/2" - 2" Conduit Size Slug-Buster(R) Knockout Punch Kit ga mm lbs. kg. 10 3.5 10 4.54 7238SB/34757Slug-Buster(R) Knockout Punch Kit Includes hole size actual USA PHONE 800.435.0786 FAX 800.451.2632 CANADA PHONE 866.384.8813 FAX 800.524.2853 INT'L cat no. upc no. description 34941 721-1/2 14722 721-3/4 124AV 721-1 126AV 721-1-1/4 128AV 721-1-1/2 440AV 721-2 442AV 00042 34941 31756 14722 31757 06972 31758 04011 31759 04013 31760 04061 31761 04063 00042 304AVBB 04042 34758 34758 PHONE +1.815.397.7070 FAX +1.815.397.9247 Ratchet wrench - 1" Hex 1/2" Conduit Size Punch 1/2" Conduit Size Die14722 3/4" Conduit Size Punch 3/4" Conduit Size Die 1" Conduit Size Punch 1" Conduit Size Die 1-1/4" Conduit Size Punch 1-1/4" Conduit Size Die 1-1/2" Conduit Size Punch 1-1/2" Conduit Size Die 2" Conduit Size Punch 2" Conduit Size Die Ball Bearing Draw Stud with 1" Hex Head-3/8" x 1-5/8" Ball Bearing Draw Stud-3/4" x 2-15/16" Plastic Case o inch o mm. 7/8 7/8 .885 .885 -- -- -- -- -- -- -- -- 2-3/8 2-3/8 1.115 1.115 1.362 1.362 1.701 1.701 1.951 1.951 2.416 2.416 22.5 22.5 28.3 28.3 34.6 34.6 43.2 43.2 49.6 49.6 61.5 61.5 www.greenlee.com 75 Knockouts Slug-Buster(R) Manual Knockout Kits * Assortment of commonly used Slug-Buster(R) knockout punches, packaged to meet the contractor's needs. * High-impact, rugged plastic carrying case. Capacity Mild steel weight cat no. 7235BB upc no. 7235BB 32013 7237BB 32014 description GA mm lbs. kg. 1/2" - 1-1/4" Conduit Size Manual Slug-Buster(R) Knockout Punch Kit 1-1/2" and 2" Conduit Size Manual Slug-Buster(R) Knockout Punch Kit 10 3.5 2.7 1.2 10 3.5 5.2 2.4 7235BB/32013Slug-Buster(R) Knockout Punch Kit Includes hole size actual cat no. upc no. 721-1/2 14722 00042 721-3/4 124AV 721-1 126AV 721-1-1/4 128AV 249AVBB 31880 7237BB 31756 14722 00042 31757 06972 31758 04011 31759 04013 04040 31880 description o inch 1/2" Conduit Size Punch 1/2" Conduit Size Die Draw Stud-3/8" x 1-5/8" 3/4" Conduit Size Punch 3/4" Conduit Size Die 1" Conduit Size Punch 1" Conduit Size Die 1-1/4" Conduit Size Punch 1-1/4" Conduit Size Die Draw Stud-3/4" x 2-1/8" Plastic Case 7/8 7/8 .885 .885 22.5 22.5 -- -- -- -- -- -- 1.115 1.115 1.362 1.362 1.701 1.701 28.3 28.3 34.6 34.6 43.2 43.2 o mm 7237BB/32014Slug-Buster(R) Knockout Punch Kit Includes hole size actual TRUSTED 76 SINCE 1862 cat no. upc no. 721-1-1/2 440AV 721-2 442AV 304AVBB 32012 31760 04061 31761 04063 04042 32012 USA PHONE 800.435.0786 FAX 800.451.2632 description o inch 1-1/2" Conduit Size Punch 1-1/2" Conduit Size Die 2" Conduit Size Punch 2" Conduit Size Die Draw Stud-3/4" x 2-15/16" Plastic Case -- -- 2-3/8 2-3/8 CANADA PHONE 866.384.8813 FAX 800.524.2853 INT'L o mm 1.951 1.951 2.416 2.416 49.6 49.6 61.5 61.5 PHONE +1.815.397.7070 FAX +1.815.397.9247 = Replacement Part = new product B = Accessory = Bare tool Slug-Buster(R) Knockout Kit with Ratchet Wrench - Metric * 1" (25.4 mm) hex ratchet wrench allows use with both 3/8" (9.5 mm) and 3/4" (19.1 mm) draw studs. * 3/8" (9.7 mm) Kwik Stepper(R) step bit included. * High-impact, rugged plastic carrying case. 36690 weight cat no. upc no. 36690 36690 36691 36691 36692 36692 36693 36693 description lbs. kg. Pg-9 through Pg-21 and 30.5 mm Manual SlugBuster(R) Metric Knockout Punch Kit Pg-9 through Pg-48 and 30.5 mm Manual Slug-Buster(R) Metric Knockout Punch Kit ISO-16 through ISO-40 Manual Slug-Buster(R) Metric Knockout Punch Kit ISO-16 through ISO-63 Manual Slug-Buster(R) Metric Knockout Punch Kit 4.7 2.1 9 4.1 5.6 2.5 9 4.1 HOLE SIZE DRAW STUDS AND MISC. PUNCHES AND DIES CAT NO. USA UPC NO. KIT CAT./UPC NO. CAPACITY MILD STEEL ACTUAL DESCRIPTION IN. MM GA MM 36690 36691 31969 31969 Pg-9 Slug-Buster(R) Punch -- 0.598 15.2 14 2.0 32002 32002 Pg-9 Die -- 0.598 15.2 14 2.0 31970 31970 Pg-11 Slug-Buster(R) Punch -- 0.732 18.6 14 2.0 32003 32003 Pg-11 Die -- 0.732 18.6 14 2.0 31971 32004 31971 32004 Pg-13 Slug-Buster(R) Punch Pg-13 Die -- -- 0.803 0.803 20.4 20.4 14 14 2.0 2.0 721-1/2 31756 Pg-16 Slug-Buster(R) Punch 7/8 0.885 22.5 10 3.5 14722 14722 Pg-16 Die 7/8 0.885 22.5 10 3.5 31973 31973 Pg-21 Slug-Buster(R) Punch -- 1.115 28.3 14 2.0 32006 32006 Pg-21 Die -- 1.115 28.3 14 2.0 36284 36284 30.5 mm Slug-Buster(R) Punch 1-7/32 1.210 30.5 14 2.0 36279 36279 30.5 mm Die 1-7/32 1.210 30.5 14 2.0 31975 31975 Pg-29 Slug-Buster(R) Punch -- 1.457 37.0 10 3.5 32008 32008 Pg-29 Die -- 1.457 37.0 10 3.5 31976 31976 Pg-36 Slug-Buster(R) Punch -- 1.850 47.0 10 3.5 32009 32009 Pg-36 Die -- 1.850 47.0 10 3.5 31978 31978 Pg-48 Slug-Buster(R) Punch -- 2.362 60.0 10 3.5 32011 32011 Pg-48 Die -- 2.362 60.0 10 3.5 35163 35163 ISO-16 Slug-Buster(R) Punch -- 0.638 16.2 14 35162 35162 ISO-16 Die -- 0.638 16.2 35165 35165 ISO-25 Slug-Buster(R) Punch 1 1.000 35164 35164 ISO-25 Die 1 35169 35169 ISO-32 Slug-Buster(R) Punch 35168 35168 35158 36692 36993 2.0 14 2.0 25.4 14 2.0 1.000 25.4 14 2.0 -- 1.280 32.5 10 3.5 ISO-32 Die -- 1.280 32.5 10 3.5 35158 ISO-40 Slug-Buster(R) Punch -- 1.595 40.5 10 3.5 35159 35159 ISO-40 Die -- 1.595 40.5 10 3.5 35160 35160 ISO-50 Slug-Buster(R) Punch 2 2.000 50.8 10 3.5 35161 35161 ISO-50 Die 2 2.000 50.8 10 3.5 35167 35167 ISO-63 Slug-Buster(R) Punch 2-1/2 2.500 63.5 10 3.5 35166 35166 ISO-63 Die 2-1/2 2.500 63.5 10 3.5 249AVBB 04040 304AVBB 36018 34941 00042 04042 36018 34941 00042 36685 36685 Draw Stud - 3/4" x 2-1/8" Draw Stud - 3/4" x 2-15/16" Kwik Stepper(R) Step Bit 9.7mm Ratchet Wrench - 1" Hex Ball Bearing Drive Nut with 1" Hex Head, 3/8" x 3" Plastic Case PHONE 800.435.0786 FAX 800.451.2632 CANADA PHONE 866.384.8813 FAX 800.524.2853 INT'L PHONE +1.815.397.7070 FAX +1.815.397.9247 www.greenlee.com 77 Knockouts Slug-Buster(R) Knockout Punch Kits for Ratchet/Hydraulic Drivers * Packaged in carton for easy insertion into your existing case. * Replacement punch kits for battery-powered, hydraulic and ratchet drivers. weight cat no. upc no. description lbs. kg. 7216 32017 1/2" - 2" Conduit Size Knockout Punch and Die Kit 5.5 2.5 7214E 7215E 32398 32803 Pg-9 through 30.5 mm Slug-Buster(R) Pg Punch Kit ISO-16 through ISO-40 Slug-Buster(R) ISO Punch Kit 1.3 5.1 .6 2.3 35617 35617 ISO-16 through ISO-40 Slug-Buster(R) ISO Punch Kit 1.6 .7 06892 06892 ISO-16 through ISO-63 Slug-Buster (R) ISO Punch Kit 5.5 2.5 HOLE SIZE CAT NO. UPC NO. CONDUIT & PIPE SIZE DESCRIPTION ACUTAL 7216/ 32017 7214E/ 32398 7215E/ 32803 31756 14722 1/2" Conduit Size Punch 1/2" Conduit Size Die 1/2" 1/2" 721-3/4 31757 3/4" Conduit Size Punch 3/4" -- 1.115 28.3 10 3.5 06972 06972 3/4" Conduit Size Die 3/4" -- 1.115 28.3 10 3.5 721-1 31578 1" Conduit Size Punch 1" -- 1.362 34.6 10 3.5 126AV 04011 1" Conduit Size Die 1" -- 1.362 34.6 10 3.5 721-1-1/4 31759 1-1/4" Conduit Size Punch 1-1/4" -- 1.701 43.2 10 3.5 128AV 04013 1-1/4" Conduit Size Die 1-1/4" -- 1.701 43.2 10 3.5 721-1-1/2 31760 1-1/2" Conduit Size Punch 1-1/2" -- 1.951 49.6 10 3.5 440AV 04061 1-1/2" Conduit Size Die 1-1/2" -- 1.951 49.6 10 3.5 721-2 31761 2" Conduit Size Punch 2" 2-3/8 2.416 61.5 10 3.5 442AV 04063 2" Conduit Size Die 2" 2-3/8 2.416 61.5 10 3.5 31969 31969 Pg-9 Slug-Buster Punch -- -- .598 15.2 14 2.0 32002 32002 Pg-9 Slug-Buster Die -- -- .598 15.2 14 2.0 31970 31970 Pg-11 Slug-Buster Punch -- -- .732 18.6 14 2.0 32003 32003 Pg-11 Slug-Buster Die -- -- .732 18.6 14 2.0 31971 31971 Pg-13 Slug-Buster Punch -- -- .803 20.4 14 2.0 32004 32004 Pg-13 Slug-Buster Die -- -- .803 20.4 14 2.0 31973 31973 Pg-21 Slug-Buster Punch -- -- 1.115 28.3 14 2.0 32006 32006 Pg-21 Slug-Buster Die -- -- 1.115 28.3 14 2.0 36284 36284 30.5 mm Punch -- 1-7/32 1.210 30.5 14 3.5 36279 36279 30.5 mm Die -- 1-7/32 1.210 30.5 14 3.5 31975 31975 Pg-29 Slug-Buster Punch -- -- 1.457 37.0 10 3.5 32008 32008 Pg-29 Slug-Buster Die -- -- 1.457 37.0 10 3.5 31976 31976 Pg-36 Slug-Buster Punch -- -- 1.850 47.0 10 3.5 32009 32009 Pg-36 Slug-Buster Die -- -- 1.850 47.0 10 3.5 31978 31978 Pg-48 Slug-Buster Punch -- -- 2.362 60.0 10 3.5 32011 32011 Pg-48 Slug-Buster Die -- -- 2.362 60.0 10 3.5 35163 35163 ISO-16 Punch -- -- 0.638 16.2 14 2.0 35162 35162 ISO-16 Die -- -- 0.638 16.2 14 2.0 35165 35165 ISO-25 Punch -- 1 1.000 25.4 14 2.0 35164 35164 ISO-25 Die -- 1 1.000 25.4 14 2.0 35169 35169 ISO-32 Punch -- -- 1.280 32.5 10 3.5 35169 35169 ISO-32 Die -- -- 1.280 32.5 10 3.5 35158 35158 ISO-40 Punch -- -- 1.595 40.5 10 3.5 35158 35158 ISO-40 Die -- -- 1.595 40.5 10 3.5 35160 35160 ISO-50 Punch -- 2 2.000 50.8 10 3.5 35160 35160 ISO-50 Die -- 2 2.000 50.8 10 3.5 35167 35167 ISO-63 Punch -- -- 2.520 64.0 10 3.5 35167 35167 ISO-63 Die -- -- 2.520 64.0 10 3.5 TRUSTED SINCE 1862 USA .885 .885 MM 22.5 22.5 GA 10 10 MM 3.5 3.5 35617 06892 IN. 7/8 7/8 721-1/2 14722 78 KIT CAT./UPC NO. CAPACITY MILD STEEL PHONE 800.435.0786 FAX 800.451.2632 CANADA PHONE 866.384.8813 FAX 800.524.2853 INT'L PHONE +1.815.397.7070 FAX +1.815.397.9247 = Replacement Part = new product B = Accessory = Bare tool SLUG-BUSTER(R) KNOCKOUTS Slug-Buster(R) Knockout Punches 0.492" to 2.520" * The contractor's choice - worldwide. * Unique punch profile also splits slugs for easier slug removal. * Use with battery-powered, hydraulic, ratchet or manual drivers. * Uses standard Greenlee dies and draw studs. * Slug Buster(R) punches available in sizes up thru 2.52" (64.0 mm). SPECIFICATIONS Capacity Application Hole Sizes Unique Slug-Buster(R) punch design creases slug as the punch is drawn into the die. Slug is split in half as punching operation is completed. Split slugs fall free from the die and stud. Operation Punch Unit Replacement Parts PUNCH UNIT INCLUDES Punch, Die and Draw Stud cat no. Mild steel up through 10 gauge (3.5 mm). Punch mild steel, aluminum, fiberglass and plastic. Conduit Sizes- Hole size is outside diameter of US conduit sizes. i.e 1/2" conduit actually 7/8". Pg Sizes-European standard pipe sizes. ISO Sizes- International Standards Organization pipe sizes. Battery, hydraulic, ratchet or manual drivers. When used with ratchet, hydraulic or battery drivers, buy the punch and die only; the draw stud is part of the driver kit. upc no. Capacity Mild Steel CONDUIT HOLE SIZE & PIPE Actual Weight size O inch O mm GA. mm lbs g 06727 12356 12357 7211EBB-15.2 35177 12335 7211EBB-18.6 12307 7211EBB-20.4 7211BB-1/2 06727 12356 12357 31989 35177 12335 31990 12307 31991 31962 -- -- -- -- -- -- -- -- -- 1/2" -- 1/2 9/16 -- -- 11/16 -- 3/4 -- 7/8 0.492 -- -- 0.598 0.638 -- 0.732 -- 0.803 0.885 12.5 12.7 14.3 15.2 16.2 17.5 18.6 19.1 20.4 22.5 16 16 16 14 14 14 14 14 14 10 1.5 1.5 1.5 2.0 2.0 2.0 2.0 2.0 2.0 3.5 0.3 0.15 0.16 0.3 0.3 0.3 0.3 0.4 0.3 0.3 137 69 73.5 137 137 177 137 183 137 137 12338 35178 12341 7211BB-3/4 7211EBB-28.3 60246 36508 12308 35179 12344 12338 35178 12341 31963 31993 60246 36508 12308 35179 12344 -- 1/2" -- -- 3/4" 3/4" -- -- -- -- -- -- 15/16 7/8 1 1-1/16 -- -- -- 1-7/32 1-7/32 1-1/4 -- 1-5/16 -- 0.885 1.000 -- 1.115 1.115 1.115 1.210 1.210 -- 1.280 -- 23.8 22.5 25.4 27 28.3 28.3 28.3 30.5 30.5 31.8 32.5 33.4 14 10 14 14 10 10 14 10 14 16 10 16 2.0 3.5 2.0 2.0 3.5 3.5 2.0 3.5 2.0 1.5 3.5 1.5 0.5 -- 0.5 0.6 0.8 -- 0.5 0.6 0.6 0.7 0.8 0.7 253 -- 227 261 363 -- 227 273 273 326.5 363 345 7211BB-1 12304 7211EBB-37 12313 35180 31964 12304 31995 12313 35180 1" 1" -- -- -- -- -- -- 1-3/8 -- 1-1/2 -- 1.362 1.362 -- 1.457 -- 1.595 34.6 34.6 34.9 37.0 38.1 40.5 10 10 10 10 10 10 3.5 3.5 3.0 3.5 3.0 3.5 1 -- 1.1 1.2 1.2 1.2 454 -- 507.5 545 559 545 REPLACEMENT REPLACEMENT PUNCH REPLACEMENT DIE MANUAL DRAW STUD Cat. No. UPC No. Cat. No. UPCNo. Cat. No. UPCNo. 06728 12360 06728 12360 06729 12358 06729 12358 12359 31969 35163 12337 31970 12306 31971 721-1/2 32002 35162 12336 32003 12305 32004 14722 1675AV 1675AV 1675AV 00042 00042 00042 00042 00042 00042 00042 04218 04218 04218 00042 00042 00042 00042 00042 00042 00042 12359 12361 12361 31969 35163 12337 31970 12306 31971 31756 32002 35162 12336 32003 12305 32004 14722 12340 721-1/2P 35165 12343 721-3/4 721-3/4P 31973 60237 36284 12309 35169 12346 12340 01980 35165 12343 31757 01981 31973 60237 36284 12309 35169 12346 12339 14722P 35164 12342 124AV 124AVP 32006 36278 36279 12310 35168 12345 12339 01992 35164 12342 06972 01993 32006 36278 36279 12310 35168 12345 00042 00042P 00042P 00042 249AVBB 249AVBBP 00042 249AVBB 00042 00042 249AVBB 00042 00042 06678 06678 00042 04040 01987 00042 04040 00042 00042 04040 00042 721-1 721-1P 12303 31975 12312 35158 31758 01982 12303 31975 12312 35158 126AV 126AVP 12302 32008 12311 35159 04011 01994 12302 32008 12311 35159 249AVBB 249AVBBP 04040 249AVBB 04040 249AVBB 04040 01987 04040 04040 04040 04040 12347 12347 -- 1-5/8 -- 41.3 10 3.0 1.3 610.25 12349 12349 12348 12348 04040 04040 7211BB-1-1/4 12316 7211EBB-47 12350 7211BB-1-1/2 35181 36171 12351 7211EBB-60 7211BB-2 35182 31965 12316 31996 12350 31966 35181 36171 12351 31998 31967 35182 1-1/4" -- 1-1/4" -- -- 1-1/2" 1-1/2" -- -- -- -- 2" 2" -- -- 1-3/4 -- -- 1-7/8 -- -- 2 2-1/8 2-1/4 -- 2-3/8 2-3/8 -- 1.701 -- 1.701 1.850 -- 1.951 1.951 2.000 2.125 -- 2.362 2.416 2.416 2.520 43.2 44.5 43.2 47.0 47.6 49.6 49.6 50.8 54.0 57.2 60.0 61.5 61.5 64.0 10 10 10 10 10 10 10 10 10 10 10 10 10 10 3.5 3.0 3.5 3.5 3.0 3.5 3.5 3.5 3.5 3.0 3.5 3.5 3.5 3.5 1.3 1.4 -- 1.9 1.8 2.1 -- 2.3 2.5 2.9 2.8 3.2 -- 3.4 590 661.5 -- 862 853.5 953 -- 1043 1134 1336 1270 1452 -- 1542 721-1-1/4 12315 721-1-1/4P 31976 31759 12315 01983 31976 128AV 12314 128AVP 32009 04013 12314 01995 32009 12354 12354 12352 12352 721-1-1/2 721-1-1/2P 35160 36172 12355 31978 721-2 721-2P 35167 31760 01984 35160 36172 12355 31978 31761 01985 35167 440AV 440AVP 35161 36173 12353 32011 442AV 442AVP 35166 04061 01996 35161 36173 12353 32011 04063 01997 35166 249AVBB 04040 249AVBBP 304AVBB 04042 304AVBB 304AVBBP 304AVBB 304AVBB 04042 304AVBB 304AVBB 304AVBBP 304AVBB 04040 04040 01987 04042 04042 04042 01988 04042 04042 04042 04042 04042 01988 04042 * Individually Packaged in Point of Purchase clamshell for display opportunities USA PHONE 800.435.0786 FAX 800.451.2632 CANADA PHONE 866.384.8813 FAX 800.524.2853 INT'L PHONE +1.815.397.7070 FAX +1.815.397.9247 www.greenlee.com 79 Knockouts Slug-Buster SC(R) (Self-Centering) * Save time and ensure accuracy! Self-centering punch aligns itself on pilot hole. * No need to draw crosshairs or line up die alignment marks. * Unique punch also splits slugs for easier slug removal. * US Patent No. 6,973,729 (R) Punch unit cat no. upc no. CONDUIT & pipe size Hole sizes inch mm WEIGHT OF punch unit lbs. g 77U-1/2* 10801 1/2" .885 22.2 0.3 137 77U-3/4* 10802 3/4" 1.115 28.3 0.8 363 10807* 77U-1* 10807 10803 1" 1.21 1.362 30.5 34.6 0.9 1 408 454 77U-1-1/4* 10804 1-1/4" 1.701 43.2 1.3 590 77U-1-1/2* 10805 1-1/2" 1.951 49.6 2.1 953 77U-2* 10806 2" 2.416 61.4 2.3 1043 10800 10800 1/2"-2" Kit - - - - punch only cat no. UPC no. die only cat no. 77P-1/2 77P-1/2P* 77P-3/4 77-3/4P* 11357 77P-1 77P-1P* 77P-1-1/4 77P-1-1/4P* 77P-1-1/2 77P-1-1/2P* 77P-2 77P-2P* - 14722 14722P* 124AV 124AVP* 36278 126AV 126AVP* 128AV 128AVP* 440AV 440AVP* 442AV 442AVP* - 11361 11261 11362 11262 11357 11363 11263 11364 11264 11365 11265 11366 11266 - UPC no. 14722 01992 06972 01993 36278 04011 01994 04013 01995 04061 01996 04063 01997 - stud only cat no. upc no. 00042 00042 249AVBB 249AVBBP* 249AVBB 294AVBB 249AVBBP 249AVBB 249AVBBP* 304AVBB 304AVBBP* 304AVBB 304AVBBP* - 00042 00042 04040 01987 04040 04040 01987 04040 01987 04042 01988 04042 01988 *POP Packaged 10800 Slug-Buster SC Knockout Kit Includes (R) cat no. 77P-1/2 14722 77P-3/4 124AV 77P-1 126AV 77P-1-1/4 128AV 77P-1-1/2 440AV 77P-2 442AV upc no. 11361 14722 11362 06972 11363 04011 11364 04013 11365 04061 11366 04063 description Conduit Size Hole sizes 1/2" Punch Buster, SC 1/2" Die Rd. 3/4" Punch Buster, SC 3/4" Die Rd. 1" Punch Buster, SC 1" Die Rd. 1-1/4" Punch Buster, SC 1-1/4" Die Rd. 1-1/2" Punch Buster, SC 1-1/2" Die Rd. 2" Punch Buster, SC 2" Die Rd. 1/2" 1/2" 3/4" 3/4" 1" 1" 1-1/4" 1-1/4" 1-1/2" 1-1/2" 2" 2" .885 .885 1.115 1.115 1.362 1.362 1.701 1.701 1.951 1.951 2.416 2.416 TRUSTED 80 SINCE 1862 USA PHONE 800.435.0786 FAX 800.451.2632 CANADA PHONE 866.384.8813 FAX 800.524.2853 INT'L PHONE +1.815.397.7070 FAX +1.815.397.9247 = Replacement Part = new product B = Accessory = Bare tool STANDARD Hydraulic KNOCKOUT PUNCH KITS Standard Round Manual Industrial Punch Kit (continued) * Fast, easy and simple to operate. * Compact design for field use on construction sites and maintenance jobs. * Punches 10 times faster than wrench method. * Will also drive 751 Cable Cutter head. * Can be used with most standard round Slug-Buster(R) and Slug-Splitter SCTM punches (not 1/2", 9/16", 5/8"). * Can be used with non-round punches (adapter may be required). * 3-foot hose * Powerful 11-ton hydraulic ram. Weight cat no. upc no. description lbs. kg. 7306 15909 24 10.9 7310 15910 54 24.5 7646Pg 27433 24 10.9 7304 02815 21 9.5 38456 38456 48.4 22 7310SB Driver, Hand Pump, Standard Punches, Dies and Draw Studs for 1/2" through 2" Conduit, Plastic Case Driver, Hand Pump, Standard Punches, Dies and Draw Studs and Spacers for 1/2" through 4" Conduit, Plastic Case Metric - Driver, Hand Pump, Standard Pg Punches, Dies and Draw Studs and Spacers for 15.2 mm through 60.0 mm, Plastic Case Standard Punch and Die Kit (no draw studs) for 2-1/2" through 4" Conduit, Plastic Case Driver, Hand Pump, Standard Punches, Dies and Draw Studs and Spacers for 1/2" through 3" and 4" Conduit, Plastic Case steel capacities for conduit sizes Standard Punches and Slug-Buster(R) REQUIRED DRAW STUD and Accessories 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" 3/4" Stud (2113B), 3/8" Stud (20963) & Spacers 3/4" Stud (2113B), Long Spacer 3/4" Stud (2113B), Short Spacer 3/4" Stud (2113B) 3/4" Stud (2113B), & Sleeve (03170) 10 GA. Mild Steel Ram and Hand Pump Hydraulic Driver Parts Identification BB F F H H G G L L KK JJ I AA R R M M N N USA PHONE 800.435.0786 FAX 800.451.2632 CANADA PHONE 866.384.8813 FAX 800.524.2853 INT'L KEY CAT. NO. upc no. A B F G H I J K L M N R 746 2113B 1557AA 20963 15908 1924AA 1925AA 1926AA 34410 767 06302 30206 17091 10109 03170 20963 PHONE +1.815.397.7070 FAX +1.815.397.9247 03248 03249 06904 13284 06302 description Ram (includes Item B) Draw Stud-3/4" x 5 3/8" Punch Sleeve Draw Stud-3/8" x 4.8" Spacer Group (includes Items I, J and K) Spacer-Short Spacer-Medium Spacer-Long Kwik Stepper(R) Step Bit 1/2" Hydraulic Hand Pump High Pressure Hose-1/4" x 3' Plastic Case www.greenlee.com 81 Knockouts Ram and Hand Pump Kits Parts List HOLE SIZE DRAW STUDS AND MISC. PUNCHES AND DIES CAT NO. CONDUIT & PIPE SIZE UPC NO. DESCRIPTION 7646/ 15906 7306/ 15909 7310/ 15910 7646PG/ 27433 38456 721-1/2 31756 1/2" Conduit Size Slug-Buster(R) Punch 1/2" o IN 7/8 0.885 o MM 22.5 14722 14722 1/2" Conduit Size Die 1/2" 7/8 0.885 22.5 123AV 04008 3/4" Conduit Size Punch 3/4" -- 1.115 28.3 1 1 124AV 06972 3/4" Conduit Size Die 3/4" -- 1.115 28.3 1 1 1 125AV 04010 1" Conduit Size Punch 1" -- 1.362 34.6 1 1 1 126AV 04011 1" Conduit Size Die 1" -- 1.362 34.6 1 1 1 127AV 06974 1-1/4" Conduit Size Slug-Buster(R) Punch 1-1/4" 1-11/16 1.701 43.2 1 1 1 128AV 04013 1-1/4" Conduit Size Die 1-1/4" 1-11/16 1.701 43.2 1 1 1 439AV 06978 1-1/2" Conduit Size Punch 1-1/2" 1-15/16 1.951 49.6 1 1 1 440AV 04061 1-1/2" Conduit Size Die 1-1/2" 1-15/16 1.951 49.6 1 1 1 441AV 04062 2" Conduit Size Punch 2" 2-3/8 2.416 61.5 1 1 1 442AV 04063 2" Conduit Size Die 2" 2-3/8 2.416 61.5 1 1 1 1429AV 04175 2-1/2" Conduit Size Punch 2-1/2" 2-7/8 2.914 74.0 1 1 1430AV 04177 2-1/2" Conduit Size Die 2-1/2" 2-7/8 2.914 74.0 1 1 1431AV 04180 3" Conduit Size Punch 3" 3-1/2 3.539 89.9 1 1 1432AV 04183 3" Conduit Size Die 3" 3-1/2 3.539 89.9 1 1 2982AV 04653 3-1/2" Conduit Size Punch 3-1/2" 4 4.044 102.7 1 2981AV 04652 3-1/2" Conduit Size Die 3-1/2" 4 4.044 102.7 1 2984AV 04655 4" Conduit Size Punch 4" 4-1/2 4.544 115.4 1 2983AV 04654 4" Conduit Size Die 4" 4-1/2 4.544 115.4 1 21316 21316 Pg-9 Slug Buster(R) Punch -- -- 0.598 15.2 1 32002 32002 Pg-9 Die -- -- 0.598 15.2 1 17700 17700 Pg-11 Slug Buster(R) Punch -- -- 0.732 18.6 1 32003 32003 Pg-11 Die -- -- 0.732 18.6 1 17697 17697 Pg-13 Slug Buster(R) Punch -- -- 0.803 20.4 1 32004 32004 Pg-13 Die -- -- 0.803 20.4 1 36882 36882 Pg-21 Slug Buster(R) Punch 3/4" -- 1.115 28.3 1 32006 32006 Pg-21 Die 3/4" -- 1.115 28.3 1 36282 36282 30.5 mm Punch -- 1-7/32 1.210 30.5 1 36279 36279 30.5 mm Die -- 1-7/32 1.210 30.5 1 18331 18331 Pg-29 Slug Buster(R) Punch -- -- 1.457 37.0 1 32008 32008 Pg-29 Die -- -- 1.457 37.0 1 17687 17687 Pg-36 Slug Buster(R) Punch -- -- 1.850 47.0 1 32009 32009 Pg-36 Die -- -- 1.850 47.0 1 17690 17690 Pg-48 Slug Buster(R) Punch -- -- 2.362 60.0 1 32011 32011 Pg-48 Die -- -- 2.362 60.0 1 746 17091 Ram (includes following item) 1 1 1 1 1 2113B 10109 Draw Stud-3/4" x 5 3/8" 1 1 1 1 1 1557AA 03170 Punch Sleeve 1 1 1 1 1 20963 20963 Draw stud-3/8" x 4.8" 1 1 1 1 1 15908 15908 Spacer Group (includes 1 ea. of following 3 items) 1 1 1 1 1 1924AA 03248 Spacer-Short 1 1 1 1 1 1925AA 03249 Spacer-Medium 1 1 1 1 1 1926AA 06904 Spacer-Long 1 1 1 1 1 34410 34410 Kwik Stepper(R) Step Bit 1/2" 1 1 1 1 1 767 13284 Hydraulic Hand Pump 1 1 1 1 1 06302 06302 High Pressure Hose - 1/4" x 3' 1 1 1 1 30206 30206 Plastic Case 1 1 18402 18402 Steel case 1 1 SINCE 1862 USA PHONE 800.435.0786 FAX 800.451.2632 1 1 CANADA PHONE 866.384.8813 FAX 800.524.2853 1 1 1 1 1 1 TRUSTED 82 KIT CAT./UPC NO. ACTUAL INT'L 1 PHONE +1.815.397.7070 FAX +1.815.397.9247 = new product = Replacement Part = Accessory B = Bare tool STANDARD KNOCKOUT PUNCH KITS Standard Round Manual Knockout Punch Kits *Assortment of commonly used round standard knockout punches, packaged to meet the contractor's needs. * High-impact, rugged plastic carrying case. capacity mild steel 737BB weight cat no. upc no. description Ga mm lbs. kg. 735BB 19973 1/2" - 1-1/4" Conduit Size Knockout Punch Kit (Manual Round Standard) 10 3.5 2.5 1.1 737BB 19974 1-1/2" - 2" Conduit Size Knockout 10 3.5 4.4 2.0 7304 02815 Standard Punches and Dies (no draw 10 3.5 21 9.5 Punch Kit (Manual Round Standard) studs) for 2-1/2" through 4" Conduit, in Plastic Case 735BB/19973Knockout Punch Kit Includes Hole size actual Wrenches Sold Separately for kits 737BB, 735BB and 7304BB 735BB cat no. upc no. description o inch 721-1/2 31756 1/2" Conduit Size Slug-Buster(R) Punch 7/8 0.885 22.5 14722 14722 1/2" Conduit Size Die 7/8 0.885 22.5 00042 123AV 00042 04008 3/8" x 1-9/16" Draw Stud 3/4" Conduit Size Punch -- 1.115 28.3 124AV 125AV 06972 04010 3/4" Conduit Size Die 1" Conduit Size Punch -- -- 1.115 1.362 28.3 34.6 126AV 127AV 04011 06974 1" Conduit Size Die 1-1/4" Conduit Size Punch -- 1-11/16 1.362 1.701 34.6 43.2 128AV 04013 1-1/4" Conduit Size Die 1-11/16 1.701 43.2 249AVBB 04040 3/4" x 2-1/8" Draw Stud 31880 31880 Plastic Case o mm. 737BB/19974Knockout Punch Kit Includes Hole size actual cat no. upc no. description o inch 439AV 06978 1-1/2" Conduit Size Punch 1-15/16 1.951 49.6 440AV 04061 1-1/2" Conduit Size Die 1-15/16 1.951 49.6 441AV 442AV 04062 04063 2" Conduit Size Punch 2" Conduit Size Die 2-3/8 2-3/8 2.416 2.416 61.5 61.5 304AVBB 32012 04042 32012 3/4" x 2-15/16" Draw Stud Plastic Case o mm. 7304/02815Knockout Punch Kit Includes Hole size actual 7304 For 11 Ton Hydraulic Drivers cat no. upc no. description o inch 1429AV 04175 2-1/2" Conduit Size Punch 2-7/8 2.914 74.0 1430AV 04177 2-1/2" Conduit Size Die 2-7/8 2.914 74.0 1431AV 1432AV 04180 04183 3" Conduit Size Punch 3" Conduit Size Die 3-1/2 3-1/2 3.539 3.539 89.9 89.9 2982AV 2981AV 04978 04652 3-1/2" Conduit Size Punch 3-1/2" Conduit Size Die 4 4 4.044 4.044 102.7 102.7 2984AV 04655 4" Conduit Size Punch 4-1/2 4.544 115.4 2983AV 04654 4" Conduit Size Die 4-1/2 4.544 115.4 30236 30236 Plastic Case o mm. NOTE:See Standard Round Knockout Punches on pages 86 and 87 for listing of individual punch units, punches, dies and draw studs. USA PHONE 800.435.0786 FAX 800.451.2632 CANADA PHONE 866.384.8813 FAX 800.524.2853 INT'L PHONE +1.815.397.7070 FAX +1.815.397.9247 www.greenlee.com 83 Knockouts Standard Round Manual Industrial Punch Kit * Includes most popular sizes for industrial applications. * Time-saving tool for maintenance, repair and operation applications. * Convenient steel carrying case. * Ball bearing drive screw for easy manual operation or use with ratchet and hydraulic drivers. SPECIFICATIONS Capacity Operation Wrench Sold Separately 1-1/4" Punch - 16 gauge (1.5 mm) mild steel. 3/4", 1", and 1-1/8" Punches - 14 gauge (2.0 mm) mild steel. 7/8" and 1-1/2" Punches 10 gauge (3.5 mm) mild steel. Manual - Wrench not included. cat no. upc no. description 39860 39860 3/4" - 1-1/2" Hole Size Manual Industrial Punch Kit 39860 MANUAL Industrial Knockout Punch Kit Includes Hole size actual cat no. description o inch 03998 3/4" Punch 3/4 0.750 19.1 114AV 03999 3/4" Die 3/4 0.750 19.1 121AV 14722 04006 14722 7/8" Punch 7/8" Die 7/8 7/8 0.885 0.885 22.5 22.5 87AV 35164 03986 35164 1" Punch 1" Die 1 1 1.000 1.000 25.4 25.4 91AV 03990 1-1/8" Punch 1-1/8 1.125 28.6 92AV 03991 1-1/8" Die 1-1/8 1.125 28.6 117AV 118AV 04002 04003 1-1/4" Punch 1-1/4" Die 1-1/4 1-1/4 1.250 1.250 31.8 31.8 3207AV 04736 1-1/2" Punch 1-1/2 1.500 38.1 3208AV 07044 1-1/2" Die 1-1/2 1.500 38.1 00042 00042 3/8" BB Draw Stud 249AVBB 04040 3/4" BB Draw Stud 19193 19193 Steel Storage Box 113AV upc no. o mm 10 GA. Mild Steel TRUSTED 84 SINCE 1862 USA PHONE 800.435.0786 FAX 800.451.2632 CANADA PHONE 866.384.8813 FAX 800.524.2853 INT'L PHONE +1.815.397.7070 FAX +1.815.397.9247 = Replacement Part = new product B = Accessory = Bare tool Standard Round Manual Knockout Punch Kits - Metric * 1" (25.4 mm) Hex ratchet wrench allows use with both 3/8" (9.5 mm) and 3/4" (19.1 mm) draw studs. * 12.7 mm Kwik Stepper(R) step bit included. * Plastic carrying case included. SPECIFICATIONS Operation Manual - Ratchet wrench included Weight cat no. upc no. description lbs. kg. 36687 36687 8.8 4 36688 36688 5.2 2.3 7309E 32804 8.8 4 36687 Pg-9 through Pg-48 Manual Round Standard Knockout Punch Kit ISO-16 through ISO-40 Manual Round Standard Knockout Punch Kit Pg-9 through Pg-48 Standard Knockout Pg. Punch Kit. Replacement Kit Packaged in Carton Without Plastic Case. DRAW STUDS AND MISC. PUNCHES AND DIES HOLE SIZE USA CAT NO. UPC NO. 21316 31969 32002 17700 32003 17697 32004 121AV 14722 36882 32006 36282 36279 18331 32008 17687 32009 17690 32011 35193 35162 87AV 35164 24459 35168 24462 35159 1756AV 35161 1758AV 1757AV 249AVBB 304AVBB 34941 34410 00042 21316 31969 32002 17700 32003 17697 32004 04006 14722 36882 32006 36282 36279 18331 32008 17687 32009 17690 32011 35193 35162 03986 35164 24459 35168 24462 35159 04232 35161 04234 04233 04040 04042 34941 34410 00042 36685 36685 PHONE 800.435.0786 FAX 800.451.2632 ACTUAL DESCRIPTION Pg-9 Punch Pg-9 Slug-Buster(R) Punch Pg-9 Die Pg-11 Punch Pg-11 Die Pg-13 Punch Pg-13 Die Pg-16 Punch Pg-16 Die Pg-21 Punch Pg-21 Die 30.5 mm Punch 30.5 mm Die Pg-29 Punch Pg-29 Die Pg-36 Punch Pg-36 Die Pg-48 Punch Pg-48 Die ISO-16 Punch ISO-16 Die ISO-25 Punch ISO-25 Die ISO-32 Punch ISO-32 Die ISO-40 Punch ISO-40 Die ISO-50 Punch ISO-50 Die ISO-63 Punch ISO-63 Die Draw Stud - 3/4" x 2-1/8" Draw Stud - 3/4" x 2-15/16" Ratchet Wrench -1" Hex Kwik Stepper Step Bit 1-2" (12.7 mm) Ball Bearing Draw Stud with 1" Hex Head, 3/8" x 1-5/8" Plastic Case CANADA PHONE 866.384.8813 FAX 800.524.2853 KIT CAT./UPC NO. INT'L o INch -- -- -- -- -- -- -- 7/8 7/8 -- -- 1-7/32 1-7/32 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 0.885 0.885 1.115 1.115 1.362 1.362 1.701 1.701 1.951 1.951 2.416 2.416 PHONE +1.815.397.7070 FAX +1.815.397.9247 o MM 22.5 22.5 28.3 28.3 34.6 34.6 43.2 43.2 49.6 49.6 61.5 61.5 CAPACITY MILD STEEL GA MM 14 2.0 14 2.0 14 2.0 14 2.0 14 2.0 14 2.0 14 2.0 10 3.5 10 3.5 10 3.5 10 3.5 16 1.5 16 1.5 10 3.5 10 3.5 10 3.5 10 3.5 10 3.5 10 3.5 14 2.0 14 2.0 14 2.0 14 2.0 10 3.5 10 3.5 10 3.5 10 3.5 10 3.5 10 3.5 10 3.5 10 3.5 36687 36688 7309E/ 32804 www.greenlee.com 85 Knockouts STANDARD KNOCKOUT PUNCHES Standard Round Knockout Punches 0.5" to 6" Conduit and Pipe * Round standard metal punch units are complete units consisting of punch, die and draw stud. * Use with battery-powered, hydraulic, ratchet or manual drivers. * Properly assembled through pilot holes, they will make clean, fast and accurate holes. SPECIFICATIONS Capacity Application Hole Sizes Operation Ball Bearing Nut Bushing Die Mild steel up through 10 gauge (3.5 mm). Punch mild steel, aluminum, fiberglass and plastic. Conduit Sizes - Hole size is outside diameter of US conduit sizes. Example: 1/2" conduit size punch actually makes a 7/8" hole. Pg Sizes - European standard pipe sizes. ISO Sizes - International Standards Organization pipe sizes. Operate with battery-powered, hydraulic, ratchet or manual drivers. When used with battery-powered, hydraulic, or ratchet drivers buy the punch and die only; the draw stud is part of the driver kit. cat no. upc no. 3037AV O4686 description Bushing for 3-1/2" (conduit hole size) and larger punches with manual operation Draw Stud Punch Every cut quick and clean TRUSTED 86 SINCE 1862 USA PHONE 800.435.0786 FAX 800.451.2632 Slug falls free in die. CANADA PHONE 866.384.8813 FAX 800.524.2853 ...Just tip it out. INT'L PHONE +1.815.397.7070 FAX +1.815.397.9247 = Replacement Part = new product = Accessory B = Bare tool Standard Round Knockout Punches punch unit Replacement Parts PUNCH KIT-INCLUDES Punch, Die & Draw Stud CAT NO. UPC NO. CAPACITY HOLE SIZE CONDUIT & Pipe Size MILD STEEL WEIGHT ACTUAL o inch omm GA mm lbs g REPLACEMENT punch cat. no. upc no. REPLACEMENT Replacement Die Draw Stud cat. no. upc no. cat. no. REPLACEMENT Ball Bearing Nut upc no. Cat.no upc no. 02408 02433 21115 02409 35192 25340 18886 20667 18887 20668 22563 25341 20670 25342 22564 36910 20671 36506 20673 24476 25344 22565 25427 18890 25428 24477 25349 22566 25350 -- 1/2 0.500 12.7 16 1.5 .1 46 1760AV 06996 1759AV 04235 1675AV 04218 -- -- 9/16 0.563 14.3 16 1.5 .1 46 1754AV 04230 1753AV 04229 1675AV 04218 -- -- -- -- 0.598 15.2 14 2.0 .3 137 21316 21316 32002 32002 00042 00042 -- -- -- 5/8 0.625 15.9 16 1.5 .2 91 1742AV 04223 1743AV 04224 1675AV 04218 -- -- -- -- 0.638 16.2 14 2.0 .3 137 35193 35193 35162 35162 00042 00042 -- -- -- 11/16 0.688 17.5 14 2.0 .3 137 1752AV 04228 1751AV 04227 00042 00042 -- -- -- -- 0.732 18.6 14 2.0 .3 137 17700 17700 32003 32003 00042 00042 -- -- -- 3/4 0.750 19.1 14 2.0 .3 137 113AV 03998 114AV 03999 00042 00042 -- -- -- -- 0.803 20.4 14 2.0 .3 137 17697 17697 32004 32004 00042 00042 -- -- -- 13/16 0.812 20.6 14 2.0 .3 137 1745AV 04226 1744AV 04225 00042 00042 -- -- 1/2" 7/8 0.885 22.5 10 3.5 .4 182 121AV 04006 14722 14722 00042 00042 -- -- -- 15/16 0.937 23.8 14 2.0 .5 227 1762AV 04238 1761AV 04237 00042 00042 -- -- -- 1 1.00 25.4 14 2.0 .5 227 87AV 03986 35164 35164 00042 00042 -- -- -- 1-1/16 1.063 27.0 14 2.0 .5 227 1763AV 04240 1764AV 04242 00042 00042 -- -- 3/4" -- 1.115 28.3 10 3.5 .9 409 123AV 04008 124AV 06972 249AVBB 04040 -- -- 3/4" -- 1.115 28.3 14 2.0 .6 273 36882 36882 32006 32006 00042 00042 -- -- -- 1-1/8 1.125 28.6 14 2.0 .6 273 91AV 03990 92AV 03991 00042 00042 -- -- -- 1-7/32 1.210 30.5 16 1.5 .6 273 36282 36282 36279 36279 00042 00042 -- -- -- 1-1/4 1.250 31.8 16 1.5 .7 318 117AV 04002 118AV 04003 00042 00042 -- -- -- -- 1.280 32.5 10 3.5 1 454 24459 24459 35168 35168 249AVBB 04040 -- -- -- 1-5/16 1.313 33.4 16 3.5 .7 318 1747AV 06587 1746AV 06586 00042 00042 -- -- 1" -- 1.362 34.6 10 3.5 1.1 499 125AV 04010 126AV 04011 249AVBB 04040 -- -- -- 1-3/8 1.375 34.9 10 3.5 1.1 499 3205AV 04734 3206AV 04735 249AVBB 04040 -- -- -- -- 1.457 37.0 10 3.5 1 454 18331 18331 32008 32008 249AVBB 04040 -- -- -- 1-1/2 1.500 38.1 10 3.5 1.2 545 3207AV 04736 3208AV 07044 249AVBB 04040 -- -- -- -- 1.595 40.5 10 3.5 1.3 590 24462 24462 35159 35159 249AVBB 04040 -- -- -- 1-5/8 1.625 41.3 10 3.5 1.4 636 1794AV 04251 1793AV 04250 249AVBB 04040 -- -- 1-1/4" 1-11/16 1.701 43.2 10 3.5 1.4 636 127AV 06974 128AV 04013 249AVBB 04040 -- -- -- 1-3/4 1.750 44.5 10 3.5 1.5 681 1816AV 04257 1815AV 04256 249AVBB 04040 -- -- -- 1.850 47.0 10 3.5 1.7 772 17687 17687 32009 32009 304AVBB 04042 -- -- -- 1-7/8 1.875 47.6 10 3.5 1.9 862 1791AV 04248 1792AV 04249 304AVBB 04042 -- -- 1-1/2" 1-15/16 1.951 49.6 10 3.5 2 908 439AV 06978 440AV 04061 304AVBB 04042 -- -- -- 2 2.000 50.8 10 3.5 1.9 862 1756AV 04232 35161 36173 304AVBB 04042 -- -- -- 2-1/8 2.125 54.0 10 3.5 2.2 998 1783AV 04245 36173 04059 304AVBB 04042 -- -- -- 2-1/4 2.250 57.2 10 3.5 2.6 1180 437AV 04058 438AV 32011 304AVBB 04042 -- -- -- -- 2.362 60.0 10 3.5 2.6 1180 17690 17690 32011 04063 304AVBB 04042 -- -- 2" 2-3/8 2.416 61.5 10 3.5 3 1361 441AV 04062 442AV 04233 304AVBB 04042 -- -- 2-1/2 2.500 63.5 10 3.5 3 1361 1758AV 04234 1757AV 06997 1434AV 04188 1433AVBB 04187 -- 2-5/8 2.625 66.7 10 3.5 5.1 2314 1795AV 04252 1796AV 04246 1434AV 04188 1433AVBB 04187 -- 2-3/4 2.750 69.9 10 3.5 4.8 2178 1790AV 04247 1789AV 02443 304AVBB 04042 -- -- -- 2.781 70.6 10 3.5 3.8 1724 730101A 02445 730100A 04177 1434AV 04188 1433AVBB 2-1/2" 2-7/8 2.914 74.0 10 3.5 5 2268 1429AV 04175 1430AV 04258 1434AV 04188 1433AVBB 04187 -- 3 3.000 76.2 10 3.5 6.1 2767 1821AV 04259 1820AV 06362 1434AV 04188 1433AVBB 04187 -- 3-1/8 3.125 79.4 10 3.5 6 2722 1798AV 06363 1797AV 18906 1434AV 04188 1433AVBB 04187 -- -- 3.228 82.0 10 3.5 6.3 2858 18905 18905 18906 04183 1434AV 04188 1433AVBB 04187 3" 3-1/2 3.539 89.9 10 3.5 5.9 2677 1431AV 04180 1432AV 05266 1434AV 04188 1433AVBB 04187 730PBB-3-3/4 18891 25351 22567 20676 20678 25360 18892 22568 20679 21214 25361 25383 19975 25372 25403 18635 19976 21216 -- -- 3-3/4 3.750 95.3 10 3.5 7.7 3493 4640AV 05265 4641AV 04652 3026AV 04679 3036AVBB 04685 730-1/2 730-9/16 21115 730-5/8 35192 730BB-11/16 730EBB-18.6 730BB-3/4 730EBB - 20.4 730BB-13/16 71BB 730BB-15/16 730BB-1 730BB-1-1/16 72BB 36910 730BB-1-1/8 36506 730BB-1-1/4 24476 730BB-1-5/16 73BB 730BB-1-3/8 730EBB-37 730BB-1-1/2 24477 730BB-1-5/8 74BB 730BB-1-3/4 730EBB-47 730BB-1-7/8 75BB 730BB-2 730BB-2-1/8 730BB-2-1/4 730EBB-60 76BB 730BB-2-1/2 730PBB-2-5/8 730BB-2-3/4 730MBB 738BB 730BB-3 730TBB 730EBB-82 739BB -- -- -- 04187 741BB* 19977 3-1/2"" 4 4.011 102.7 10 3.5 10 4536 2982AV 04653 2981AV 04654 3026AV 04679 3036AVBB 04685 742BB* 19978 4" 4-1/2 4.544 115.4 10 3.5 11.4 5172 2984AV 04655 2983AV 04654 3026AV 04679 3036AVBB 04685 730EBB-120* 21519 19980 50005 -- -- 4.724 120.0 10 3.5 13 5897 21489 21489 21491 21491 3026AV 04679 3036AVBB 04685 5" 5-5/8 5.675 144.1 10 3.5 19 8619 5135AV 05447 5136AV 05448 3026AV 04679 3036AVBB 04685 6" 6-3/8 6.375 161.9 10 3.5 36 16329 5137AV 50008 5138AV 50006 3026AV 04679 3036AVBB 04685 CANADA PHONE 866.384.8813 FAX 800.524.2853 743BB* 744BB USA PHONE 800.435.0786 FAX 800.451.2632 INT'L PHONE +1.815.397.7070 FAX +1.815.397.9247 www.greenlee.com 87 Knockouts SPECIAL APPLICATION PUNCHES Oiltight Punches with Notches Other oiltight sizes without notches available in standard, Slug-Buster(R) and Slug-Splitter(R) designs. Counter Nut Punch Die Draw Stud Ball Bearing Drive Nut cat./upc no Maximum Inch OPTIONAL PUNCH UNIT (Includes Punch, Capacity Mild Steel OPERATION Die Draw Stud Hole Size mm BB MINIMUM ADAPTER FOR DRAW DRIVE COUNTER PILOT HOLE WEIGHT HYDRAULIC A B C A B C GA mm Type and NUTS) Punch die stud nut nut inch mm LBS. kg. Drivers .875 .125 1.000 22.5 3.2 25.4 14 2.0 Hand/Hydr. 60238 60239 60250 60117 60165 60258 .625 15.9 2.1 .95 60167 1.210 .190 1.380 30.5 4.8 36.0 10 3.5 Hand/Hydr. 60242 60243 60249 60117 60165 60258 625 15.9 2.7 1.2 60167 For maximum draw stud life, Greenlee recommends the use of battery or hydraulic drivers. Key Punches Counter Nut Draw Stud Die Punch Ball Bearing Drive Nut cat./upc no Maximum Inch OPTIONAL PUNCH UNIT Capacity (Includes Punch, Mild Steel OPERATION Die, Draw Stud Hole Size mm BB DRAW DRIVE MINIMUM COUNTER PILOT HOLE WEIGHT ADAPTER FOR HYDRAULIC A B C A B C GA mm Type and NUTS) Punch die stud nut nut inch mm LBS. kg. Drivers 0.481 0.055 .030 12.2 1.4 .8 16 1.5 Hand/Hydr. 60101 60102 60103 60115 60120 05244 .375 9.5 .88 .4 60114 1.171 1.265 1.328 0.123 0.156 0.102 .097 .097 .097 29.7 32.1 33.7 3.1 4.0 2.6 2.5 2.5 2.5 14 14 14 2.0 2.0 2.0 Hand/Hydr. Hand/Hydr. Hand/Hydr. 60104 60107 60110 60105 60108 60111 60106 60109 60112 60166 60166 60166 60165 60165 60165 60258 60258 60258 .875 .875 .875 23.8 23.8 23.8 2.3 2.4 2.4 1.0 1.1 1.1 60167 60167 60167 For use with any Greenlee Hydraulic Driver or Battery-Powered Driver. F or maximum draw stud life, Greenlee recommends the use of battery or hydraulic drivers 720 Keyway Punch * Eliminates time-consuming hand sawing and filing when making keyways for push-button switches. * Use as a nibbler to make wider or deeper keyways. * Punches 1/8" (3.2 mm) or 3/16" (4.8 mm) keyways for 7/8" (22.5 mm) or 1-7/32" (30.5 mm) push-button holes. * Canadian Patent No. 1,172,435. SPECIFICATIONS Operation Capacity cat no. NOTE: Not for Stainless Steel Manual 10 gauge (3.5 mm) mild steel Weight upc no. description lbs. kg. 720 26534 Keyway Punch 2.8 26534 26536 Punch 26538 26538 Die 3/16" 1.27 Cutting Notch 3/16" Key 1/8" Deep Punch Die 3/32" Deep Cutting Notch 1/8" Key 1/8" 1.Locate proper cutting notch on the cutting head. 2.Place cutting notch inside edge of hole and cut keyway. TRUSTED 88 SINCE 1862 USA 3.Withdraw the punch. PHONE 800.435.0786 FAX 800.451.2632 CANADA 4.Use as a nibbler to make wider or deeper keyways. PHONE 866.384.8813 FAX 800.524.2853 INT'L PHONE +1.815.397.7070 FAX +1.815.397.9247 = Replacement Part = new product B = Accessory = Bare tool "D" Punches Counter Nut cat./upc no Maximum Hole Size Inch mm Capacity Mild Steel OPERATION PUNCH UNIT (Includes Punch, Die, Draw Stud Punch Draw Stud Die Ball Bearing Drive Nut OPTIONAL BB DRAW DRIVE MINIMUM COUNTER PILOT HOLE WEIGHT ADAPTER FOR HYDRAULIC A B A B GA mm Type and NUTS) Punch die stud nut nut inch mm LBS. kg. Drivers 0.500 0.625 0.750 0.469 0.594 0.703 12.7 15.9 19.1 11.9 15.1 19.1 16 14 14 2.0 2.0 2.0 Hand/Hydr. Hand/Hydr. Hand/Hydr. 60077 61080** 61083** 60078 60079 60115 34421 34421 60120 34733 34733 05244 04638 04638 .375 .500 .500 .9 1.1 1.2 60114 33967 33967 For use with any Greenlee Hydraulic Driver or Battery-Powered Driver Counter Nut .41 .50 .50 For maximum draw stud life, Greenlee recommends the use of battery or hydraulic drivers ** Sold as Unit only Double "D" Punches 9.5 12.7 12.7 Punch Die Ball Bearing Drive Nut Draw Stud cat./upc no Maximum Hole Size Inch mm Capacity Mild Steel OPERATION PUNCH UNIT (Includes Punch, Die, Draw Stud OPTIONAL BB DRAW DRIVE COUNTER MINIMUM PILOT HOLE WEIGHT ADAPTER FOR HYDRAULIC A B A B GA mm Type and NUTS) stud nut nut inch mm LBS. kg. Drivers 0.769 0.795 0.913 0.913 1.375 0.642 0.697 0.756 0.795 1.125 19.5 20.2 23.2 23.2 34.9 16.3 17.6 19.2 20.2 28.6 14 14 14 14 14 2.0 2.0 2.0 2.0 2.0 Hand/Hydr. Hand/Hydr. Hand/Hydr. Hand/Hydr. Hand/Hydr. 61086** 61089** 61092** 61095** 60098** 34421 34421 34421 34421 60166 34733 34733 34733 34733 60165 04638 04638 04638 04638 60258 .500 .500 .500 .500 .875 1.1 1.1 1.2 2 2.5 33967 33967 33967 33967 60167 For use with any Greenlee Hydraulic Driver or Battery-Powered Driver Square and Special Square Punches Counter Nut Special Square .50 .50 .54 .9 1.1 For maximum draw stud life, Greenlee recommends the use of battery or hydraulic drivers ** Sold as Unit only Square 12.7 12.7 12.7 12.7 23.8 Punch Die Ball Bearing Drive Nut Draw Stud cat./upc no Maximum Hole Size Inch mm Capacity Mild Steel OPERATION PUNCH UNIT (Includes Punch, Die, Draw Stud GA and NUTS) mm Type OPTIONAL BB Punch die DRAW DRIVE MINIMUM COUNTER PILOT HOLE stud nut nut inch mm WEIGHT LBS. kg. ADAPTER FOR HYDRAULIC Drivers 1/2" 0.500 x 0.500 12.7 x 12.7 16 1.5 Hand/Hydr. 60001 60002 60003 60115 60120 05244 .375 9.5 1.1 .50 60114 5/8" 3/4" 7/8" 0.625 x 0.625 0.750 x 0.750 0.882 x 0.882 0.945 x 0.945 1.000 x 1.000 1.772 x 1.772 1.811 x 1.811 2.000 x 2.000 2.677 x 2.677 3.622 x 3.622 4.125 x 4.125 5.433 x 5.433 15.9 x 15.9 19.1 x 19.1 22.4 x 22.4 24.0 x 24.0 25.4 x 25.4 45.0 x 45.0 46.0 x 46.0 50.8 x 50.8 68.0 x 68.0 92.0 x 92.0 104.8 x 104.8 138.0 x 138.0 14 14 14 14 14 10 10 10 10 10 10 14 2.0 2.0 2.0 2.0 2.0 3.5 3.5 3.5 3.5 3.5 3.5 2.0 Hand/Hydr. Hand/Hydr. Hand/Hydr. Hand/Hydr. Hand/Hydr. Hydr. Only Hydr. Only Hydr. Only Hydr. Only *Hydr. Only *Hydr. Only. *Hydr. Only 61004 61007** 61010** 61013** 60016 60287 60019 60168 60171 60174 60177 60234 60005 60006 60017 60288 60020 60169 60172 60175 60178 60023 60018 60289 60019 60170 60173 60176 60179 60024 34421 34421 34421 34421 60117 60118 60118 60118 60118 60118 60118 60118 34733 34733 34733 34733 60165 -- -- -- -- -- -- -- 04638 04638 04638 04638 60258 60235 60235 60235 60235 60235 60235 60235 .500 .500 .500 .500 .625 1.188 1.188 1.188 1.188 1.188 1.188 1.188 12.7 12.7 12.7 12.7 15.9 30.2 30.2 30.2 30.2 30.2 30.2 30.2 1.5 1.5 1.8 2.3 2.4 6.0 6.2 6.9 10.1 14.8 18.8 20 .68 .68 .82 1.0 1.1 2.7 2.8 3.1 4.6 6.7 8.5 9.1 33967 33967 33967 33967 60167 * * * 22.5 O(A ) 20.1(B) 14 2.0 Hand/Hydr. 61125** 34733 04638 .500 12.7 .7 .3 33967 1" 1-13/16" 2" 2-11/16" 3-5/8" 4-1/8" Special Square 0.886(A) 0.791(B) *For use with with Hand and Foot Pump Hydraulic Drivers with Ram ** Sold as Unit only USA PHONE 800.435.0786 FAX 800.451.2632 CANADA p For use with any Greenlee Hydraulic Driver or Battery-Powered Driver PHONE 866.384.8813 FAX 800.524.2853 INT'L PHONE +1.815.397.7070 FAX +1.815.397.9247 34421 For maximum draw stud life, Greenlee recommends the use of battery or hydraulic drivers www.greenlee.com 89 Knockouts Rectangular Punches Rectangle Counter Nut Punch Die Ball Bearing Drive Nut Draw Stud cat./upc no Maximum Hole Size Capacity Mild Steel OPERATION PUNCH UNIT (Includes Punch, Die, Draw Stud OPTIONAL BB DRAW DRIVE MINIMUM COUNTER PILOT HOLE WEIGHT ADAPTER FOR HYDRAULIC Inch mm GA mm Type and NUTS) Punch die stud nut nut inch mm LBS. kg. Drivers 0.437 x 0.875 0.670 x 0.749 0.750 x 1.140 0.750 x 1.310 0.861 x 1.018 0.866 x 1.181 0.866 x 1.654 0.990 x 1.140 1.250 x 1.380 1.312 x 2.625 1.378 x 2.047 1.378 x 2.559 1.378 x 3.228 1.378 x 4.409 1.811 x 3.622 2.250 x 3.500 2.677 x 5.433 11.1 x 22.2 17.0 x 19.0 19.1 x 29.0 19.1 x 33.3 21.9 x 25.9 22.0 x 30.0 22.0 x 42.0 25.1 x 29.0 31.8 x 35.1 33.3 x 67.9 35.0 x 52.0 35.0 x 65.0 35.0 x 82.0 35.0 x 112.0 46.0 x 92.0 57.2 x 88.9 68.0 x 138.0 16 14 14 14 14 14 14 14 14 10 10 10 14 14 10 10 14 1.5 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 3.5 3.5 3.5 2.0 2.0 3.5 3.5 2.0 Hand/Hydr. Hand/Hydr. Hand/Hydr. Hand/Hydr. Hand/Hydr. Hand/Hydr. Hand/Hydr. Hand/Hydr. Hand/Hydr. Hand/Hydr. Hand/Hydr. Hand/Hydr. Hand/Hydr. Hand/Hydr. Hand/Hydr. Hand/Hydr. Hand/Hydr. 60025 61028 60031 60034 60037 60040 60043 60047 60050 60053 60056 60059 60062 60065 60068 60071 60074 60026 60029 60032 60035 60038 60041 60045 60048 60051 60054 60057 60060 60063 60066 60069 60072 60075 60027 60030 60033 60036 60039 60042 60046 60049 60052 60055 60058 60061 60064 60067 60070 60073 60076 60115 34421 60117 60117 60117 60117 60117 60117 60117 60118 60118 60118 60118 60118 60118 60118 60118 60120 34733 60165 60165 60165 60165 60165 60165 60165 -- -- -- -- -- -- -- -- 05244 04638 60258 60258 60258 60258 60258 60258 60258 60235 60235 60235 60235 60235 60235 60235 60235 .375 .500 .625 .625 .625 .625 .625 .625 .625 1.188 1.188 1.188 1.188 1.188 1.188 1.188 1.188 9.5 12.7 15.9 15.9 15.9 15.9 15.9 15.9 15.9 30.2 30.2 30.2 30.2 30.2 30.2 30.2 30.2 1.2 1.5 2.3 2.3 2.3 2.4 2.9 2.6 3.1 5.1 6.1 6.8 7.7 9.2 8.9 10.1 16.1 .5 .68 1.0 1.0 1.0 1.1 1.3 1.2 1.4 2.3 2.8 3.1 3.5 4.2 4.0 4.6 7.3 60114 33967 60167 60167 60167 60167 60167 60167 60167 * * * * * * For use with with Hand and Foot Pump Hydraulic Drivers with Ram For use with any Greenlee Hydraulic Driver or Battery-Powered Driver For maximum draw stud life, Greenlee recommends the use of battery or hydraulic drivers Electronic Connector Panel Punches * Cut-out and mounting slots are punched in one operation. * Drill only one 7/16" (11.1 mm) pilot hole. (See page 104 for Kwik Stepper(R) step bits.) * Fast, accurate panel punching with no sawing or filing required. * Universal size punches for front or back mount of TRW Cinch and ITT Cannon-type or equivalent connectors in 9, 15, 25, 37 or 50-pin configurations. SPECIFICATIONS Capacity Operation PUNCH UNIT CAT. NO. 16 gauge (1.5 mm) mild steel; 10 gauge (3.5 mm) aluminum Manual with a wrench; Quick Draw(R) and Quick Draw 90(R) hydraulic drivers, Battery Driver, Ram and Pump hydraulic drivers aluminum DIMENSIONS UPC NO. NO. OF PINS 229 34436 9 231 34437 15 RS232 34420 25 234 34429 37 238 34444 50 WEIGHT A B C .787" (20.0 mm) 1.127" (28.6 mm) 1.6555" (42.0 mm) 2.296" (58.3 mm) 2.201" (55.9 mm) .982" (24.9 mm) 1.309" (33.3 mm) 1.853" (47.1 mm) 2.497" (58.3 mm) 2.402" (61.0 mm) .469" (11.9 mm) .469" (11.9 mm) .469" (11.9 mm) .469" (11.9 mm) .579" (14.7 mm) DRAW STUD SQUARE COUNTER NUT DRIVE NUT LBS. KG 34421 04638 34733 1.4 .64 34421 04638 34733 1.5 .68 34421 04638 34733 2.0 .91 34421 04638 34733 2.0 .91 34421 04638 34733 2.0 .91 For maximum draw stud life, Greenlee recommends the use of battery or hydraulic drivers TRUSTED 90 SINCE 1862 USA PHONE 800.435.0786 FAX 800.451.2632 CANADA PHONE 866.384.8813 FAX 800.524.2853 INT'L PHONE +1.815.397.7070 FAX +1.815.397.9247 = Replacement Part = new product B = Accessory = Bare tool KNOCKOUT PARTS CABINETS Knockout Punch Parts Assortment Cabinets * Includes balanced stock of replacement parts in sturdy steel cabinets. Cat No. UPC No. 7360SB 34358 7361SB 34359 Description Knockout Punch Parts Assortment 1/2" - 2". Includes Metal Cabinet 14" High, 13" Wide and 14-3/4" Deep, with 4 Drawers. Knockout Punch Parts Assortment 1/2" - 3". Includes Metal Cabinet 19-1/2" High, 27" Wide and 15" Deep with 4 Drawers. 7360SB 7361SB/34359 Parts Cabinet Includes cat no. 7361SB 7360SB/34358 Parts Cabinet Includes cat no. upc no. description QTY. 721-1/2 31756 Slug-Buster(R) 1/2" Conduit Punch 18 14722 721-3/4 124AV 721-1 126AV 721-1-1/4 128AV 721-1-1/2 440AV 721-2 442AV 00042 249AVBB 304AVBB 12097 20963 2113B 31832 14722 31757 06972 31758 04011 31759 04013 31760 04061 31761 04063 00042 04040 04042 12097 20963 10109 31832 1/2" Conduit Die Slug-Buster(R) 3/4" Conduit Punch 3/4" Conduit Die Slug-Buster(R) 1" Conduit Punch 1" Conduit Die Slug-Buster(R) 1-1/4" Conduit Punch 1-1/4" Conduit Die Slug-Buster(R) 1-1/2" Conduit Punch 1-1/2" Conduit Die Slug-Buster(R) 2" Conduit Punch 2" Conduit Die 3/8" Drive Screw 3/4" Drive Screw 3/4" Drive Screw 3/8" Adapter Screw 3/8" Draw Stud 3/4" Draw Stud Cabinet only 12 6 6 3 3 3 3 2 2 2 1 12 4 4 4 20 4 1 USA PHONE 800.435.0786 FAX 800.451.2632 CANADA PHONE 866.384.8813 FAX 800.524.2853 INT'L PHONE +1.815.397.7070 FAX +1.815.397.9247 721-1/2 14722 721-3/4 124AV 721-1 126AV 721-1-1/4 128AV 721-1-1/2 440AV 721-2 442AV 1429AV 1430AV 1431AV 1432AV 00042 249AVBB 304AVBB 1434AV 1433AVBB 12097 30227 12099 20963 2113B 1557AA 3037AV 1924AA 1925AA 1926AA 28154 28155 29451 31834 31849 upc no. 31756 14722 31757 06972 31758 04011 31759 04013 31760 04061 31761 04063 04175 04177 04180 04183 00042 04040 04042 04188 04187 12097 30227 12099 20963 10109 03170 04686 03248 03249 06904 28154 28155 29451 31834 31849 description QTY. Slug-Buster 1/2" Conduit Punch 1/2" Conduit Die Slug-Buster(R) 3/4" Conduit Punch 3/4" Conduit Die Slug-Buster(R) 1" Conduit Punch 1" Conduit Die Slug-Buster(R) 1-1/4" Conduit Punch 1-1/4" Conduit Die Slug-Buster(R) 1-1/2" Conduit Punch 1-1/2" Conduit Die Slug-Buster(R) 2" Conduit Punch 2" Conduit Die 2-1/2" Conduit Punch 2-1/2" Conduit Die 3" Conduit Punch 3" Conduit Die 3/8" Draw Stud 3/4" Drive Screw 3/4" Drive Screw 5-1/2" x 3/4" Drive Screw 1" Ball Bearing Nut 3/8" Adapter Screw 7/16" Adapter Screw 3/4" Ball Bearing Adapter Screw 3/8" Draw Stud 3/4" Draw Stud 1-1/8" Punch Sleeve 3-1/2", 4" & 5" Conduit Bushing Short Spacer Medium Spacer Long Spacer Punch 1/2" HD Slug-Splitter SCTM Die 1/2" HD Slug-Splitter SCTM Draw Stud, 7/16" Stainless Steel Cabinet A only (top) Cabinet B only (bottom) 18 12 6 6 6 6 6 6 3 3 3 2 1 1 1 1 12 8 6 1 1 6 2 2 20 6 1 1 4 4 4 1 1 1 1 1 (R) www.greenlee.com 91 Knockouts DRAW STUDS FOR KNOCKOUTS Replacement Draw Studs for Manual Drivers Replacement Draw Stud Selection Guide Refer to the ACTUAL SIZE pictures and information below when ordering a replacement draw stud. Sizes given are diameter X length. 1675AV Draw Stud - 1/4" (6.4 mm) x 1-3/8" (35 mm) 00042 - 3/8" (9.5 mm) x 1-5/8" (41 mm) 249AVBB - 3/4" (19.0 mm) x 2-1/8" (54 mm) 3026AV - 1-1/8" (28.6 mm) x 7-1/2" (190 mm) 304AVBB - 3/4" (19.0 mm) x 2-15/16" (75 mm) TRUSTED 92 1434AV 3/4" (19.0 mm) x 5-1/2" (140 mm) SINCE 1862 USA PHONE 800.435.0786 FAX 800.451.2632 CANADA PHONE 866.384.8813 FAX 800.524.2853 INT'L PHONE +1.815.397.7070 FAX +1.815.397.9247 = new product = Replacement Part = Accessory B = Bare tool Replacement Draw Studs for Hydraulic Drivers Replacement Draw Stud Selection Guide Refer to the ACTUAL SIZE pictures and information below when ordering a replacement draw stud. Sizes given are diameter X length. 1557AA- 1-1/8" (28.6 mm) x 3" (76 mm) 60114 (Adapter) - 3/4" (19 mm) x 1/4" (6.35 mm) internal 33967 (Adapter) - 3/4" (19 mm) x 3/8" (9.5 mm) internal 60167 (Adapter) - 3/4" (19 mm) x 1/2" (12.7 mm) internal 1614SS- 3/8" (9.5 mm) x 2-13/16" (71 mm) 2113B - 3/4" (19.0 mm) x 5.38" (137 mm) 20963 - 3/8" (9.5 mm) to 3/4" (19.0 mm) x 4.8" (122 mm) 7212SP11 - 3/4" (19 mm) 7212SP12 *- 3/4" (19 mm) x 5.63" (143 mm) x 4.77" (121 mm) *For use with 746 Hydraulic RAM USA PHONE 800.435.0786 FAX 800.451.2632 CANADA PHONE 866.384.8813 FAX 800.524.2853 INT'L PHONE +1.815.397.7070 FAX +1.815.397.9247 www.greenlee.com 93 Knockouts Replacement Draw Studs for Hydraulic Drivers (continued) 31872 - 3/4" (19 mm) x 4-1/2" (114.3 mm) 29451 - 7/16" (11.1 mm) x 4-1/4" (108 mm) 29452 - 3/4" (19.0 mm) x 5-1/2" (140 mm) Replacement Draw Studs for Ratchet Drivers Replacement Draw Stud Selection Guide Refer to the ACTUAL SIZE pictures and information below when ordering a replacement draw stud. Sizes given are diameter X length. 12099 - 3/4" (19.0 mm) x 4-3/4" (121 mm) 30227 - 7/16" (11.1 mm) x 3-5/8" (92 mm) 12097 - 3/8" (9.5 mm) x 3-1/2" (89 mm) TRUSTED 94 SINCE 1862 USA PHONE 800.435.0786 FAX 800.451.2632 CANADA PHONE 866.384.8813 FAX 800.524.2853 INT'L PHONE +1.815.397.7070 FAX +1.815.397.9247 = new product = Replacement Part = Accessory B = Bare tool Replacement Draw Studs for Special Shape Punches Replacement Draw Stud Selection Guide Refer to the ACTUAL SIZE pictures and information below when ordering a replacement draw stud. Sizes given are diameter X length. For maximum draw stud life, Greenlee recommends the use of battery or hydraulic drivers. 60166 - 1/2" (12.7 mm) x 4-5/8" (117.5 mm) 60117 - 1/2" (12.7 mm) x 4-5/8" (117.5 mm) 34421 - 3/8" (9.5 mm) x 3-1/2" (88.9 mm) 60115 - 1/4" (6.3 mm) x 3-7/16" (87.3 mm) 60116 - 1/2" (12.7 mm) x 4-5/8" (117.5 mm) 60118 - 3/4" (19 mm) x 6-3/4" (171.5 mm) USA PHONE 800.435.0786 FAX 800.451.2632 CANADA PHONE 866.384.8813 FAX 800.524.2853 INT'L PHONE +1.815.397.7070 FAX +1.815.397.9247 www.greenlee.com 95 Knockouts STUD PUNCHES ESP710L Stud Punch * This tool punches 1-11/32" (34.1 mm) diameter holes in 16 and 18 gauge structural studs. * Has the ability to punch holes in under 5 seconds * The ESP710L can take both time and hard work out of the stud punching process. * 4" Throat Depth from center of punch. Cat. No. UPC No. ESP710L11 52165 Description Punch, Stud Bat 120V Charger BATTERY-POWERED STUD PUNCH Cat. No. ESP710L11 UPC No. 52165 actual hole size Weight length height IN. mm LBS. kg IN. mm IN. mm GA capacity mm BATTERY CHARGER 1-11/32 34.1 9.2 4.2 15 381 11-3/4 298 16 1.5 3.0Ah 18V, Li-Ion 120 Volt Plumber Stud Punch * Punches 2-5/8" (66.7 mm) diameter hole in metal studs for professional-looking installation of 2" water, vent, waste pipes. * Two-speed lever action for fast, easy punching of 24 to 20 gauge thick metal studs. * 2-1/8" (54 mm) throat width fits over most studs and channels. * High strength alloy aluminum c-frame and handle provides lightweight tool for easy handling-10.6 lb. (4.8 kg). * Lever action punch retraction strips punch out of metal stud fast and easy. Patent #6,647,630 SPECIFICATIONS Actual Hole Size Weight Length Height Capacity Cat. No. 713 08377 08379 08375 55316 TRUSTED 96 SINCE 1862 USA 2-5/8" (66.7 mm) 10.6 lbs. (4.8 kg) 23-1/2" (596 mm) 9-3/4" (247 mm) 24-20 GA (0.9 mm) UPC No. 06430 08377 08379 08375 55316 PHONE 800.435.0786 FAX 800.451.2632 Description Plumber Stud Punch Punch for 713 Die for 713 Link Pin, Groove .31 x 1.75 CANADA PHONE 866.384.8813 FAX 800.524.2853 INT'L PHONE +1.815.397.7070 FAX +1.815.397.9247 = Replacement Part = new product = Accessory B = Bare tool Metal Stud Punches * Punch up through 20 gauge (0.9 mm) steel studs in one stroke. * Aluminum head provides strength with minimum weight, reducing operator fatigue. * Contoured handle design gives better operator leverage and makes it possible to punch in tight places. * Self-stripping design eliminates punch hang-ups. * Automatically centers holes on standard studs. * Conversion kit available to upgrade early models from 24 gauge to 20 gauge maximum capacity. Weight cat no. SPECIFICATIONS Capacity 709 - 1-5/8" (41.3 mm) and wider studs. 20 gauge (0.9 mm) steel studs. 710 - 2-1/2" (63.4 mm) and wider studs. 20 gauge (0.9 mm) steel studs. upc no. description lbs. kg. 709 22280 7/8" (22.2 mm) Diameter Stud Punch 7 3.2 710 21285 1-11/32" (34.1 mm) Diameter Stud Punch 7.5 3.5 30968 30968 121AV 22286 24823 21297 06015 36617 05932 21557 04006 22286 24823 21297 06015 36617 05932 21557 Conversion Kit - Upgrades Early Model 709 or 710 from 24 to 20 Gauge Maximum Capacity Punch for 709 Die for 709 Punch for 710 Die for 710 Pin Kit Link Link and Pin Kit (709/710) Compression Spring Bushings for Metal Stud Punches * Triple lock design holds bushing securely. * Locks securely into metal studs from 24 gauge to 12 gauge (0.6 mm to 2.5 mm). * Helps protect wire insulation from sharp edges of metal studs. * Makes pulling smooth and easy by preventing hang-ups of cable on raw metal edges. Weight cat no. upc no. 711C 22288 711M 22289 712A100 05927 712A1000 05928 Manual Stud Punch description lbs. kg. 100 Bushings for Hole Punched by 709 for 7/8" (22.2 mm) Diameter Hole 1,000 Bushings for Hole Punched by 709 for 7/8" (22.2 mm) Diameter Hole 100 Bushings for Pre-Punched Hole or 1-11/32" (34.1 mm) Diameter Hole Punched by 710 1,000 Bushings for Pre-Punched Hole or 1-11/32" (34.1 mm) Diameter Hole Punched by 710 .5 .23 3.7 1.7 1.4 .64 15.5 7.0 * Punch up through 20 gauge (0.9 mm) steel studs in one stroke. * Unique patented punch rolls the edge over for smooth installation of armored cable; cable won't hang up. * Contoured handle design gives better operator leverage and makes it possible to punch in tight places. * Automatically centers holes on standard studs. SPECIFICATIONS Actual Hole Size Weight Length Height Capacity USA cat no. 1-1/4" (31.7 mm) 4.0 lbs. (1.8 kg) 16-3/4" (426 mm) 4-1/2" (247 mm) 24-20 GA (0.9 mm) PHONE 800.435.0786 FAX 800.451.2632 CANADA PHONE 866.384.8813 FAX 800.524.2853 INT'L upc no. description 724 10415 Manual Stud Punch 10419 10419 Punch for 724 PHONE +1.815.397.7070 FAX +1.815.397.9247 www.greenlee.com 97 Knockouts C-FRAME PUNCHES 1731 & 1732 Portable C-Frame Punch Drivers 1731 1732 Hole Size Cat. No. UPC No. 13266 13267 13276 13277 13268 121AV 123AV 125AV 12087 12086 12085 1725 16634 38316 13266 13267 13276 13277 13268 04006 04008 04010 12087 12086 12085 1725 16634 38316 54169 54170 06302 11797 11790 11789 767 755 37729 11289 27335 50642 12079 15631 37614 11903 13814 54169 54170 06302 11797 11790 11789 767 755 37729 11289 27335 50642 12079 15631 37614 11903 13814 Description IN C-Frame with Ram Punch Adapter - 3/8" O x 1/2" (9.5 mm) Punch Adapter - 3/4" O x 1" (19.0 mm) Punch Adapter - 3/8" O x 1/2" (9.5 mm) Punch Adapter - 3/4" O x 1" (19.0 mm) Punch Adapter - 1-1/8" O (28.6 mm) 1/2" Conduit Size Punch 3/4" Conduit Size Die 1" Conduit Size Punch C-Frame 1/2" Conduit Size Die C-Frame 3/4" Conduit Size Die C-Frame 1" Conduit Size Die 1725 Hydraulic Foot Pump Steel Case High Pressure Hose Unit - 1/4" x 3' (includes 1 each of the following 3 items) 1/4' Male Coupler Dust Cap High Pressure Hose 1/4" x 3' Die Adapter - 3/8" O (9.5 mm) Die Adapter - 3/4" O (19.0 mm) Die Adapter - 1-1/8" O (28.6 mm) Hydraulic Hand Pump Hydraulic Hand Pump Hydraulic Hose - 1/4" x 10' (3 m) Hydraulic Hose - 3/8" x 6' (9.5 mm x 1.8) Metal Case Nut - 3/4" - 10 (19.0 mm) Frame Ram Quick Disconnect C-Frame Packing Kit MM 16 21 -- 16 21 -- 1862 22.5 28.3 34.6 22.5 28.3 34.6 cat no. Capacity 1731: Up through 10 gauge (3.0 mm) mild steel with Greenlee special C-Frame dies and standard punches; 1/2" through 1" conduit and 15.2 mm through 30.5 mm 1732: Up through 10 gauge (3.0 mm) mild steel with Greenlee Standard punches and dies; 1/2" through 4" conduit and 15.2 mm through 115.4 mm. TRUSTED 1732/ 27361 SPECIFICATIONS SINCE 1731F1725/ 25169 1/2 3/4 1 1/2 3/4 1 * Fast, one-shot punching, no predrilling of pilot holes. * Throat measures 8" (203 mm) deep. 1731 * Great for punching junction boxes and small enclosures. * Punch can be used with ram inside or outside of the junction box. * For use with 1/2" - 1" (22.5 mm - 34.6 mm) conduit size and accessory sizes only. 1732 * Use with 1/2" through 4" conduit size and other round sizes only. * Use with Greenlee standard round punches and dies (optional). 98 PG Kit Cat./UPC No. 1731/ 1731H767/ 15911 20486 USA Weight lbs. kg. upc no. description 1731 15911 1732 27361 1731H767 1731F1725 21316 18557 17700 18558 17697 18559 36282 37103 20486 25169 21316 18557 17700 18558 17697 18559 36282 37103 PHONE 800.435.0786 FAX 800.451.2632 Driver with Ram, 1/2" Through 1" Conduit (22.5 mm through 34.6 mm) Punches and Dies Driver with Ram, 3/8", 3/4" and 1-1/8" Punch and Die Adapters Same as 1731 with 767 Hydraulic Hand Pump Same as 1731 with 1725 Hydraulic Foot Pump Pg-9 (15.2 mm) Punch (optional) Pg-9 (15.2 mm) Die (optional) Pg-11 (18.6 mm) Punch (optional) Pg-11 (18.6 mm) Die (optional) Pg-13 (20.4 mm) Punch (optional) Pg-13 (20.4 mm) Die (optional) 1-7/32" (30.5 mm)Oil Tight Punch (optional) 1-7/32" (30.5 mm) Oil Tight Die (optional) CANADA PHONE 866.384.8813 FAX 800.524.2853 INT'L 32 15 59 27 36 43 17 20 PHONE +1.815.397.7070 FAX +1.815.397.9247 = new product = Replacement Part = Accessory B = Bare tool MANUAL Hydraulic PUMPS Hydraulic Hand Pump * Lightweight and portable, for use with Greenlee Punch Drivers. * Versatile, operates in any position. * Single speed. * Rugged steel pump body/reservoir with cast aluminum handle. * Has mounting holes for easy, permanent mounting. SPECIFICATIONS Operation Capacity Length Width Height Manual - Hand 6,500 psi (448 bar), .0823 in (13 mm) per stroke 13" (330 mm) 4" (102 mm) 4" (102 mm) Weight Cat. No. UPC No. 767 04343 13800 30242 13284 04343 13800 30242 30241 30241 Description lbs. kg Hydraulic Hand Pump Seal Kit Repair for Serial Code ABM *Seal Kit Repair for Serial Code 55D & Up *Seal Kit Repair for Serial Code 68BG TO BG33181628, BG331816 & Up Reservoir Follower 6 2.7 *NOTE: Must also purchase 30241 Follower NOTE: See page 100 to select the proper hydraulic hose for this pump. Hydraulic Foot Pump * Free both hands to position and hold the working tool. * Foot activated release lever. * Hold-down pin keeps pedal down for storage and transport. * Angled base bar keeps the pump upright and stable. * Includes 1/4" (6.4 mm) female coupler with dust cap. SPECIFICATIONS Operation Capacity Length Height Width Cat. No. 1725 24496 25214 33336 Manual - Foot 6,500 psi (448 bar), .117 in (19 mm) per stroke 16" (406 mm) Pedal down 6" (152 mm), Pedal up 12" (305 mm) 8" (203 mm) UPC No. 31353 24496 25214 33336 Weight Description lbs. kg Hydraulic Foot Pump Seal Kit w/ RD Serial Code Seal Kit w/ RU Serial Code Seal Kit w/ VK Serial Code 11 5 NOTE: See page 100 to select the proper hydraulic hose for this pump. USA PHONE 800.435.0786 FAX 800.451.2632 CANADA PHONE 866.384.8813 FAX 800.524.2853 INT'L PHONE +1.815.397.7070 FAX +1.815.397.9247 www.greenlee.com 99 Knockouts Hydraulic PUMP ACCESSORIES Hydraulic Hose Selection Guide Tool Cat. No./Description 750 Cable Cutter 750 Cable Cutter 750 Cable Cutter 777 Bender 782 Bender 800 Cable Bender 880 Bender 882 Bender 884 Bender 885 Bender 1731 C-Frame Punch Driver 1731 C-Frame Punch Driver 1731 C-Frame Punch Driver SDK202GL Cable Cutter RK06AT, RK06FT RK1230, RK1240, RK1240K RCCX RK1550 Tool Coupler Pump Cat. No. Hose Cat./UPC No. 767 1725 975 755, 975, 980 or 960SAPS 755 or 975 1725 755 or 975 755 or 975 980 or 960SAPS 980 or 960SAPS 767 1725 755 or 975 7475H, 975 or 980 7475H, 975 or 980 7475H, 975 or 980 7475H, 975 or 980 7475H, 975 or 980 1/4" Female Coupler 1/4" Female Coupler 1/4" Female Coupler 3/8" Female Coupler 3/8" Female Coupler 1/4" Female Coupler 3/8" Female Coupler 3/8" Female Coupler 3/8" Female Coupler 3/8" Female Coupler 1/4" Female Coupler 1/4" Female Coupler 1/4" Female Coupler 3/8" Male Coupler 3/8" Male Coupler 3/8" Male Coupler 3/8" Male Coupler 3/8" Male Coupler 38316 37729 17707 11289 11289 37729 11289 11289 11289 11289 38316 37729 11289 05850, 05851 05850, 05851 05850, 05851 05850, 05851 05850, 05851 Hydraulic Hose Units * High pressure hydraulic hose units for use with Greenlee hydraulic pumps. * Equipped with couplers and dust caps. Cat. No. UPC No. Description 05850* 05850 05851* 05851 11289* 17707* 11289 17707 37729* 38316 37729 38316 06302 06302 10' X 1/4" Hose With (1) 3/8" Male Coupler and (1) 3/8" Female Coupler 10' X 1/4" Non-Conductive Hose with (1) 3/8" Male C oupler and (1) 3/8" Female Coupler 6' X 3/8" Hose with (2) 3/8" Male Couplers 10' X 1/4" Hose with (1) 3/8" Male Coupler and (1) 1/4" Male Coupler 10' X 1/4" Hose with (2) 1/4" Male Couplers 3' X 1/4" Hose with (1) 1/4" Male Coupler and (1) 1/4" NPT Swivel Threaded Fitting 3' X 1/4" Hose with (1) 1/4" NPT Male Threaded Fitting and (1) 1/4" NPT Swivel Threaded Fitting * Filled with hydraulic oil. COUPLER SET Cat./UPC No. 3548GB/ Hose Unit Cat./UPC No. Cat. No. UPC No. 54167 54168 54169 54170 4018GB 4033GB 41877 41941 41834 54167 54168 54169 54170 50807 50823 41877 41941 41834 Description 05850 1/4" (6.4 mm) Female Coupler without Dust Cap 1/4" (6.4mm) Dust Cap for Female Coupler 1/4" (6.4 mm) Male Coupler without Dust Cap 1/4" (6.4 mm) Dust Cap for Male Coupler 3/8" (9.6 mm) Female Coupler with Dust Cap 3/8" (9.6 mm) Male Coupler with Dust Cap 3/8" (9.6 mm) Female Coupler without Dust Cap 3/8" (9.6 mm) Male Coupler without Dust Cap 3/8" (9.6 mm) Dust Cap for 41941/41877 Couplers TRUSTED 100 SINCE 1862 05851 11289 17707 1 1 2 1 1 2 37729 2 2 38316 37614 1 1 1 1 1 1 20573 1 1 1 1 1 2 USA PHONE 800.435.0786 FAX 800.451.2632 CANADA PHONE 866.384.8813 FAX 800.524.2853 INT'L PHONE +1.815.397.7070 FAX +1.815.397.9247