CNY17F
www.vishay.com Vishay Semiconductors
Rev. 2.2, 08-Jan-14 1Document Number: 83607
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Optocoupler, Phototransistor Output, no Base Connection
DESCRIPTION
The CNY17F is an optocoupler consisting of a gallium
arsenide infrared emitting diode optically coupled to a
silicon planar phototransistor detector in a plastic plug-in
DIP-6 package.
The coupling device is suitable for signal transmission
between two electrically separated circuits. The potential
difference between the circuits to be coupled is not allowed
to exceed the maximum permissible reference voltages.
In contrast to the CNY17 series, the base terminal of the
F type is not conected, resulting in a substantially improved
common-mode interference immunity.
FEATURES
• Isolation test voltage, 5000 VRMS
• No base terminal connection for improved
common mode interface immunity
• Long term stability
• Industry standard dual-in-line package
• Material categorization: For definitions of
compliance please see www.vishay.com/doc?99912
AGENCY APPROVALS
Safety application model number covering all products in
this datasheet is CNY17F. This model number should be
used when consulting safety agency documents.
• UL file no. E52744
• cUL tested to CSA 22.2 bulletin 5A
• DIN EN 60747-5-5 (VDE 0884-5), available with option 1
• BSI: EN 60065, EN 60950-1
• FIMKO EN60950
• CQC GB8898-2011
Notes
• Additional options may be possible, please contact sales office.
(1) Also available in tubes; do not put T on end.
1
2
3
6
5
4
NC
C
E
A
C
NC
i179004-14
ORDERING INFORMATION
CNY17F - #X0##T
PART NUMBER CTR
BIN
PACKAGE OPTION TAPE
AND
REEL
AGENCY CERTIFIED/PACKAGE CTR (%)
UL, cUL, BSI, FIMKO 40 to 80 63 to 125 100 to 200 160 to 320
DIP-6 CNY17F-1 CNY17F-2 CNY17F-3 CNY17F-4
DIP-6, 400 mil, option 6 CNY17F-1X006 CNY17F-2X006 CNY17F-3X006 CNY17F-4X006
SMD-6, option 7 CNY17F-1X007 (1) CNY17F-2X007T (1) CNY17F-3X007T (1) CNY17F-4X007T (1)
SMD-6, option 9 CNY17F-1X009T (1) CNY17F-2X009T (1) CNY17F-3X009T (1) CNY17F-4X009T (1)
VDE, UL, cUL, BSI, FIMKO 40 to 80 63 to 125 100 to 200 160 to 320
DIP-6 CNY17F-1X001 CNY17F-2X001 CNY17F-3X001 CNY17F-4X001
DIP-6, 400 mil, option 6 CNY17F-1X016 CNY17F-2X016 CNY17F-3X016 CNY17F-4X016
SMD-6, option 7 CNY17F-1X017 (1) CNY17F-2X017 (1) CNY17F-3X017 (1) CNY17F-4X017 (1)
SMD-6, option 9 CNY17F-1X019 CNY17F-2X019 (1) CNY17F-3X019 (1) -
7.62 mm 10.16 mm
> 8 mm 8 mm typ.
Option 7
Option 6
Option 9
DIP-6
CNY17F
www.vishay.com Vishay Semiconductors
Rev. 2.2, 08-Jan-14 2Document Number: 83607
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
• Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.
(1) Refer to reflow profile for soldering conditions for surface mounted parts (SMD). Refer to wave profile for soldering conditions for through
hole parts (DIP).
Fig. 1 - Total Power Dissipation vs. Ambient Temperature
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
INPUT
Reverse voltage VR6V
DC forward current IF60 mA
Surge forward current t ≤ 10 μs IFSM 2.5 A
Power dissipation Pdiss 100 mW
OUTPUT
Collector emitter breakdown voltage BVCEO 70 V
Collector current IC50 mA
Collector peak current tp/T = 0.5, tp ≤ 10 ms ICM 100 mA
Output power dissipation Pdiss 150 mW
COUPLER
Isolation test voltage between emitter and
detector t = 1 min VISO 5000 VRMS
Storage temperature range Tstg -55 to +150 °C
Ambient temperature range Tamb -55 to +110 °C
Junction temperature Tj100 °C
Soldering temperature (1) 2 mm from case, ≤ 10 s Tsld 260 °C
Total power dissipation Pdiss 250 mW
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
INPUT
Forward voltage IF = 60 mA VF1.39 1.65 V
Breakdown voltage IR = 10 μA VBR 6V
Reverse current VR = 6 V IR0.01 10 μA
Capacitance VR = 0 V, f = 1 MHz CO25 pF
OUTPUT
Collector emitter capacitance VCE = 5 V, f = 1 MHz CCE 5.2 pF
Base collector capacitance VCE = 5 V, f = 1 MHz CBC 6.5 pF
Emitter base capacitance VCE = 5 V, f = 1 MHz CEB 7.5 pF
0
50
100
150
200
250
300
0 20 40 60 80 100 120
Ptot - Total Power Dissipation (mW)
Tamb - Ambient Temperature (°C)
Coupled device
Phototransistor
IR-diode
CNY17F
www.vishay.com Vishay Semiconductors
Rev. 2.2, 08-Jan-14 3Document Number: 83607
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
• Minimum and maximum values were tested requierements. Typical values are characteristics of the device and are the result of engineering
evaluations. Typical values are for information only and are not part of the testing requirements.
Note
• Current transfer ratio IC/IF at VCE = 5 V, 25 °C and collector emitter leakage current by dash number.
COUPLER
Collector emitter, saturation voltage IF = 10 mA, IC = 2.5 mA VCEsat 0.25 0.4 V
Coupling capacitance CC0.6 pF
Collector emitter, leakage current VCE = 10 V
CNY17F-1 ICEO 250nA
CNY17F-2 ICEO 250nA
CNY17F-3 ICEO 5 100 nA
CNY17F-4 ICEO 5 100 nA
CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
IC/IF
IF = 10 mA
CNY17F-1 CTR 40 80 %
CNY17F-2 CTR 63 125 %
CNY17F-3 CTR 100 200 %
CNY17F-4 CTR 160 320 %
IF = 1 mA
CNY17F-1 CTR 13 30 %
CNY17F-2 CTR 22 45 %
CNY17F-3 CTR 34 70 %
CNY17F-4 CTR 56 90 %
SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
LINEAR OPERATION (without saturation)
Turn-on time IF = 10 mA, VCC = 5 V,
RL = 75 Ωton 3μs
Rise time IF = 10 mA, VCC = 5 V,
RL = 75 Ωtr2μs
Turn-off time IF = 10 mA, VCC = 5 V,
RL = 75 Ωtoff 2.3 μs
Fall time IF = 10 mA, VCC = 5 V,
RL = 75 Ωtf2μs
Cut-off frequency IF = 10 mA, VCC = 5 V,
RL = 75 ΩfCO 110 kHz
SWITCHING OPERATION (with saturation)
Turn-on time
IF = 20 mA CNY17F-1 ton 3μs
IF = 10 mA CNY17F-2 ton 4.2 μs
CNY17F-3 ton 4.2 μs
IF = 5 mA CNY17F-4 ton 6μs
Rise time
IF = 20 mA CNY17F-1 tr2μs
IF = 10 mA CNY17F-2 tr3μs
CNY17F-3 tr3μs
IF = 5 mA CNY17F-4 tr4.6 μs
Turn-off time
IF = 20 mA CNY17F-1 toff 18 μs
IF = 10 mA CNY17F-2 toff 23 μs
CNY17F-3 toff 23 μs
IF = 5 mA CNY17F-4 toff 25 μs
Fall time
IF = 20 mA CNY17F-1 tf11 μs
IF = 10 mA CNY17F-2 tf14 μs
CNY17F-3 tf14 μs
IF = 5 mA CNY17F-4 tf15 μs
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
CNY17F
www.vishay.com Vishay Semiconductors
Rev. 2.2, 08-Jan-14 4Document Number: 83607
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 2 - Test Circuit, Non-Saturated Operation
Fig. 3 - Test Circuit, Saturated Operation
Fig. 4 - Switching Times
Note
• As per DIN EN 60747-5-5, § 7.4.3.8.2, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance
with the safety ratings shall be ensured by means of protective circuits.
Channel I
Channel II
95 10804-3
R
G
= 50 Ω
t
p
t
p
= 50 µs
T= 0.01
+ 5 V
I
F
0
50 ΩRL
I
F
Oscilloscope
R
L
= 1 MΩ
C
L
= 20 pF
Channel I
Channel II
95 10843
RG= 50 Ω
tp
tp= 50 µs
T= 0.01
+ 5 V
IC
IF
0
50 Ω1 kΩ
IF= 10 mA
Oscilloscope
RL
≥
CL20 pF
1 MΩ
≤
tpt
t
0
0
10 %
90 %
100 %
tr
td
ton
tstf
toff
IF
IC
tpPulse duration
tdDelay time
trRise time
ton (= td + tr) Turn-on time
tsStorage time
tfFall time
toff (= ts + tf) Turn-off time
96 11698
SAFETY AND INSULATION RATINGS
PARAMETER SYMBOL VALUE UNIT
MAXIMUM SAFETY RATINGS
Output safety power PSO 700 mW
Input safety current ISI 400 mA
Safety temperature TSI 175 °C
Comparative tracking index CTI 175
INSULATION RATED PARAMETERS
Maximum withstanding isolation voltage VISO 5000 VRMS
Maximum transient isolation voltage VIOTM 8000 Vpeak
Maximum repetitive peak isolation voltage VIORM 890 Vpeak
Insulation resistance Tamb = 25 °C, VDC = 500 V RIO ≥ 1012 Ω
Isolation resistance Tamb = 100 °C, VDC = 500 V RIO ≥ 1011 Ω
Climatic classification (according to IEC 68 part 1) 55/115/21
Environment (pollution degree in accordance to DIN VDE 0109) 2
Creepage distance Standard DIP-4 ≥ 7mm
SMD ≥ 7mm
Clearance distance Standard DIP-4 ≥ 8mm
SMD ≥ 8mm
Insulation thickness DTI ≥ 0.4 mm
CNY17F
www.vishay.com Vishay Semiconductors
Rev. 2.2, 08-Jan-14 5Document Number: 83607
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
Fig. 5 - Forward Voltage vs. Forward Current
Fig. 6 - Collector Current vs. Collector Emitter Voltage (NS)
Fig. 7 - Collector Current vs. Collector Emitter Voltage (sat)
Fig. 8 - Leakage Current vs. Ambient Temperature
Fig. 9 - Normalized CTR (NS) vs. Ambient Temperature
Fig. 10 - Normalized CTR (sat) vs. Ambient Temperature
0.6
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.8
0.1 1 10 100
IF - Forward Current (mA)
V
F
- Forward Voltage (V)
Tamb = - 55 °C
1.5
0.7
Tamb = - 40 °C
Tamb = 100 °C
Tamb = 75 °C
Tamb = 50 °C
Tamb = 25 °C
Tamb = 0 °C
Tamb = - 25 °C
1.6
1.7
Tamb = 110 °C
0
20
30
40
50
60
01 78
VCE - Collector Emitter Voltage (NS) (V)
I
C
- Collector Current (mA)
10
65432
I
F
= 20 mA
I
F
= 15 mA
I
F
= 10 mA
I
F
= 30 mA
I
F
= 5 mA
0
10
15
20
25
00.4
VCE - Collector Emitter Voltage (sat) (V)
I
C
- Collector Current (mA)
5
0.30.20.1
I
F
= 10 mA
I
F
= 25 mA
I
F
= 5 mA
I
F
= 2 mA
I
F
= 1 mA
0.001
0.01
0.1
10
1
100
1000
10 000
- 60 100
Tamb - Ambient Temperature (°C)
I
CE0
- Leakage Current (nA)
V
CE
= 40 V
- 40 806040200- 20
I
F
= 0 mA
V
CE
= 12 V
V
CE
= 24 V
0
0.2
0.6
0.4
0.8
1.0
1.2
-60 120
Tamb - Ambient Temperature (°C)
CTR
Norm
- Normalized CTR (NS)
-40 806040200-20
I
F
= 10 mA V
CE
= 5 V
100
0
0.2
0.6
0.4
0.8
1.0
1.2
-60 120
Tamb - Ambient Temperature (°C)
CTR
Norm
- Normalized CTR (sat)
-40 806040200-20
I
F
= 10 mA V
CE
= 0.4 V
100
CNY17F
www.vishay.com Vishay Semiconductors
Rev. 2.2, 08-Jan-14 6Document Number: 83607
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 11 - Normalized CTR (NS) vs. Forward Current
Fig. 12 - Normalized CTR (sat) vs. Forward Current
Fig. 13 - CTR Frequency vs. Phase Angle
Fig. 14 - CTR -3 dB Frequency vs. Collector Current
Fig. 15 - Switching Time vs. Load Resistance
0
0.2
0.6
0.4
0.8
1.0
1.2
0.1 100
IF - Forward Current (mA)
CTR
Norm
- Normalized CTR (NS)
110
T
amb
= - 55 °C
T
amb
= - 40 °C
T
amb
= 0 °C
T
amb
= 25 °C
T
amb
= 50 °C
T
amb
= 75 °C
T
amb
= 110 °C
V
CE
= 5 V
T
amb
= 100 °C
I
F
= 10 mA
0
0.2
0.6
0.4
0.8
1.0
1.2
0.1 100
IF - Forward Current (mA)
CTR
Norm
- Normalized CTR (sat)
110
T
amb
= - 55 °C
T
amb
= - 40 °C
T
amb
= 0 °C
T
amb
= 25 °C
T
amb
= 50 °C
T
amb
= 75 °C
T
amb
= 110 °C
V
CE
= 0.4 V
T
amb
= 100 °C
I
F
= 10 mA
1
10
1000
0.1 100
IC - Collector Current (mA)
f
CTR
- CTR Frequency (kHz)
100
110
VCC = 5 V
0.1
1
10
1000
0.1 100
RL - Load Resistance (kΩ)
t
on
, t
off
- Switching Time (μs)
100
110
VCE = 5 V, IF = 10 mA
ton
toff
CNY17F
www.vishay.com Vishay Semiconductors
Rev. 2.2, 08-Jan-14 7Document Number: 83607
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PACKAGE DIMENSIONS in millimeters
PACKAGE MARKING (Example of CNY17F-2x017T)
Notes
• VDE logo is only marked on option 1 parts. Option information is not marked on the part.
• Tape and reel suffix (T) is not part of the package marking.
22530
0.26
3.5 ± 0.3
7.62 ± 0.3
0.5 ± 0.1
2.54 ± 0.25
3.3 ± 0.5
6.5 ± 0.5
7.3 ± 0.5
7.62 to 9.98
1.1 ± 0.1
0.5 typ.
2.8 ± 0.5
654
123
20802-34
10.16 typ.
7.62 typ.
Option 6
8 min.
7.62 typ.
3.5 ± 0.3
0.6 min.
10.3 max.
0.35 ± 0.25
Option 7 Option 9
7.62 typ.
0.6 min.
0.1 ± 0.1 3.5 ± 0.3
3.5 ± 0.3
0.1 min.
2.7 min.
8.16 ± 0.8
10.16 ± 0.3
2.54 R 0.25
1.78
0.76
1.52
8 min.
11.05
2.54 R 0.25
1.78
0.76
1.52
8 min.
11.05
CNY17F-2
V YWW 25
Pin 1 I.D.
CNY17F
www.vishay.com Vishay Semiconductors
Rev. 2.2, 08-Jan-14 8Document Number: 83607
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TUBE AND TAPE INFORMATION
Fig. 16 - Tape and Reel Drawing, 1000 Units per Reel
DEVICES PER TUBE
TYPE UNITS/TUBE TUBES/BOX UNITS/BOX
DIP-6 50 40 2000
22537-1
Ø 1.55 ± 0.05 1.75 ± 0.1
12 ± 0.1
0.3 ± 0.05
2 ± 0.1 4 ± 0.1
7.5 ± 0.1
16 ± 0.3
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Vishay:
CNY17F-1 CNY17F-2 CNY17F-2X016 CNY17F-3 CNY17F-3X001 CNY17F-3X006 CNY17F-3X007T CNY17F-
3X009T CNY17F-4 CNY17F-1X001 CNY17F-1X006 CNY17F-1X007 CNY17F-1X007T CNY17F-1X009 CNY17F-
1X009T CNY17F-1X016 CNY17F-1X017 CNY17F-1X017T CNY17F-1X019 CNY17F-2X001 CNY17F-2X006
CNY17F-2X007 CNY17F-2X007T CNY17F-2X009 CNY17F-2X009T CNY17F-2X017 CNY17F-2X017T CNY17F-
2X019 CNY17F-2X019T CNY17F-3X007 CNY17F-3X009 CNY17F-3X016 CNY17F-3X017 CNY17F-3X017T
CNY17F-3X019 CNY17F-3X019T CNY17F-4X001 CNY17F-4X006 CNY17F-4X007 CNY17F-4X007T CNY17F-
4X009 CNY17F-4X009T CNY17F-4X016 CNY17F-4X017 CNY17F-4X017T