NTMFS5844NL, NVMFS5844NL Power MOSFET 60 V, 61 A, 12 mW, Single N-Channel Features * * * * * * Small Footprint (5x6 mm) for Compact Design Low RDS(on) to Minimize Conduction Losses Low QG and Capacitance to Minimize Driver Losses NVMFS5844NLWF - Wettable Flanks Product NVMFS Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q101 Qualified and PPAP Capable These Devices are Pb-Free and are RoHS Compliant http://onsemi.com V(BR)DSS RDS(ON) MAX 12 mW @ 10 V 60 V Drain-to-Source Voltage Gate-to-Source Voltage Continuous Drain Current RYJ-mb (Notes 1, 2, 3, 4) Power Dissipation RYJ-mb (Notes 1, 2, 3) Continuous Drain Current RqJA (Notes 1, 3, 4) Power Dissipation RqJA (Notes 1 & 3) Pulsed Drain Current Tmb = 25C Steady State Symbol Value Unit VDSS 60 V VGS "20 V ID 61 A Tmb = 100C Tmb = 25C Steady State PD ID Current Limited by Package (Note 4) TA = 25C Operating Junction and Storage Temperature Source Current (Body Diode) Single Pulse Drain-to-Source Avalanche Energy (TJ = 25C, VDD = 50 V, VGS = 10 V, IL(pk) = 31 A, L = 0.1 mH, RG = 25 W) Lead Temperature for Soldering Purposes (1/8 from case for 10 s) 107 S (1,2,3) W N-CHANNEL MOSFET 11.2 A MARKING DIAGRAM 8.0 PD TA = 100C TA = 25C, tp = 10 ms G (4) 54 TA = 100C TA = 25C D (5) 43 Tmb = 100C TA = 25C 61 A 16 mW @ 4.5 V MAXIMUM RATINGS (TJ = 25C unless otherwise noted) Parameter ID MAX 3.7 W D 1.8 IDM 247 A IDmaxPkg 80 A TJ, Tstg -55 to 175 C IS 60 A EAS 48 mJ TL 260 C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1 DFN5 (SO-8FL) CASE 488AA STYLE 1 A Y W ZZ S S S G D XXXXXX AYWZZ D D = Assembly Location = Year = Work Week = Lot Traceability ORDERING INFORMATION See detailed ordering, marking and shipping information in the package dimensions section on page 5 of this data sheet. THERMAL RESISTANCE MAXIMUM RATINGS Parameter Junction-to-Mounting Board (top) - Steady State (Notes 2, 3) Junction-to-Ambient - Steady State (Note 3) Symbol Value Unit RYJ-mb 1.4 C/W RqJA 41 1. The entire application environment impacts the thermal resistance values shown, they are not constants and are only valid for the particular conditions noted. 2. Psi (Y) is used as required per JESD51-12 for packages in which substantially less than 100% of the heat flows to single case surface. 3. Surface-mounted on FR4 board using a 650 mm2, 2 oz. Cu pad. 4. Maximum current for pulses as long as 1 second is higher but is dependent on pulse duration and duty cycle. (c) Semiconductor Components Industries, LLC, 2013 May, 2013 - Rev. 5 1 Publication Order Number: NTMFS5844NL/D NTMFS5844NL, NVMFS5844NL ELECTRICAL CHARACTERISTICS (TJ = 25C unless otherwise specified) Parameter Symbol Test Condition Min Drain-to-Source Breakdown Voltage V(BR)DSS VGS = 0 V, ID = 250 mA 60 Drain-to-Source Breakdown Voltage Temperature Coefficient V(BR)DSS/ TJ Typ Max Unit OFF CHARACTERISTICS Zero Gate Voltage Drain Current IDSS Gate-to-Source Leakage Current V 57 VGS = 0 V, VDS = 60 V mV/C TJ = 25 C 1 TJ = 125C 100 IGSS VDS = 0 V, VGS = 20 V VGS(TH) VGS = VDS, ID = 250 mA 100 mA nA ON CHARACTERISTICS (Note 5) Gate Threshold Voltage Negative Threshold Temperature Coefficient VGS(TH)/TJ Drain-to-Source On Resistance Forward Transconductance RDS(on) 1.5 2.3 6.2 VGS = 10 V ID = 10 A 10.2 12 VGS = 4.5 V ID = 10 A 13 16 gFS VDS = 5 V, ID = 10 A V mV/C 27 mW S CHARGES, CAPACITANCES & GATE RESISTANCE Input Capacitance CISS Output Capacitance COSS Reverse Transfer Capacitance CRSS 1460 VGS = 0 V, f = 1 MHz, VDS = 25 V 150 pF 96 Total Gate Charge QG(TOT) VGS = 10 V, VDS = 48 V; ID = 10 A Total Gate Charge QG(TOT) 15 Threshold Gate Charge QG(TH) 1.0 Gate-to-Source Charge QGS Gate-to-Drain Charge QGD 8.0 Plateau Voltage VGP 3.0 V Gate Resistance RG 0.62 W td(ON) 12 VGS = 4.5 V, VDS = 48 V; ID = 10 A 30 nC 4.0 SWITCHING CHARACTERISTICS (Note 6) Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time tr td(OFF) VGS = 4.5 V, VDS = 48 V, ID = 10 A, RG = 2.5 W tf 25 ns 20 10 DRAIN-SOURCE DIODE CHARACTERISTICS Forward Diode Voltage Reverse Recovery Time Charge Time Discharge Time Reverse Recovery Charge VSD VGS = 0 V, IS = 10 A TJ = 25C 0.79 TJ = 125C 0.65 tRR ta tb 1.2 V 19 VGS = 0 V, dIS/dt = 100 A/ms, IS = 10 A QRR 13 6.0 15 5. Pulse Test: pulse width v 300 ms, duty cycle v 2%. 6. Switching characteristics are independent of operating junction temperatures. http://onsemi.com 2 ns nC NTMFS5844NL, NVMFS5844NL TYPICAL CHARACTERISTICS 50 3.6 V 40 3.4 V 30 60 50 40 30 20 3.2 V 10 3.0 V 10 0 2.8 V 0 1 2 3 4 5 TJ = 25C 20 TJ = 125C 1 TJ = -55C 2 3 4 5 VDS, DRAIN-TO-SOURCE VOLTAGE (V) VGS, GATE-TO-SOURCE VOLTAGE (V) Figure 1. On-Region Characteristics Figure 2. Transfer Characteristics 0.030 ID = 10 A TJ = 25C 0.025 0.020 0.015 0.010 0.005 VDS 10 V 70 2 4 6 8 10 12 VGS, GATE-TO-SOURCE VOLTAGE (V) 0.016 TJ = 25C 0.014 VGS = 4.5 V 0.012 VGS = 10 V 0.010 0.008 5 10 15 20 25 30 35 40 ID, DRAIN CURRENT (A) Figure 3. On-Resistance vs. Gate-to-Source Voltage Figure 4. On-Resistance vs. Drain Current and Gate Voltage 2.5 100,000 VGS = 0 V VGS = 10 V ID = 10 A 2 IDSS, LEAKAGE (nA) RDS(on), DRAIN-TO-SOURCE RESISTANCE (W) TJ = 25C 3.8 V 60 0 RDS(on), DRAIN-TO-SOURCE RESISTANCE (NORMALIZED) 4.0 V RDS(on), DRAIN-TO-SOURCE RESISTANCE (W) ID, DRAIN CURRENT (A) 70 80 VGS = 5 V 10 V ID, DRAIN CURRENT (A) 80 10,000 1.5 1 0.5 -50 -25 0 25 50 75 100 125 150 175 TJ = 150C 1,000 100 TJ = 125C 10 20 30 40 50 TJ, JUNCTION TEMPERATURE (C) VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 5. On-Resistance Variation with Temperature Figure 6. Drain-to-Source Leakage Current vs. Voltage http://onsemi.com 3 60 NTMFS5844NL, NVMFS5844NL TYPICAL CHARACTERISTICS 10 VGS = 0 V TJ = 25C 1600 C, CAPACITANCE (pF) VGS, GATE-TO-SOURCE VOLTAGE (V) 1800 1400 Ciss 1200 1000 800 600 400 Coss 200 0 Crss 0 10 20 30 40 50 60 IS, SOURCE CURRENT (A) t, TIME (ns) 2 0 VDS = 48 V ID = 10 A TJ = 25C 0 5 10 15 20 25 Qg, TOTAL GATE CHARGE (nC) td(off) tf td(on) 10 1 10 100 30 VGS = 0 V TJ = 25C 30 20 10 0 0.5 0.6 0.7 0.8 0.9 1.0 RG, GATE RESISTANCE (W) VSD, SOURCE-TO-DRAIN VOLTAGE (V) Figure 9. Resistive Switching Time Variation vs. Gate Resistance Figure 10. Diode Forward Voltage vs. Current 1000 50 VGS = 10 V Single Pulse TC = 25C 100 ms EAS, SINGLE PULSE DRAIN-TO- SOURCE AVALANCHE ENERGY (mJ) ID, DRAIN CURRENT (A) Qgd Qgs 40 tr 10 ms 1 ms 10 10 ms 0.1 4 Figure 8. Gate-to-Source Voltage vs. Total Charge 100 1 6 DRAIN-TO-SOURCE VOLTAGE (V) VDD = 48 V ID = 10 A VGS = 4.5 V 100 8 Figure 7. Capacitance Variation 1000 1 QT RDS(on) Limit Thermal Limit Package Limit 0.1 dc 1 10 VDS, DRAISN VOLTAGE (V) 100 40 30 20 10 0 25 Figure 11. Maximum Rated Forward Biased Safe Operating Area 50 75 100 125 150 TJ, STARTING JUNCTION TEMPERATURE (C) Figure 12. Maximum Avalanche Energy vs. Starting Junction Temperature http://onsemi.com 4 175 NTMFS5844NL, NVMFS5844NL TYPICAL CHARACTERISTICS RqJA(t) (C/W) EFFECTIVE TRANSIENT THERMAL RESISTANCE 100 Duty Cycle = 0.5 10 0.2 0.1 1 0.05 0.02 0.01 0.1 Single Pulse 0.01 0.000001 0.00001 0.0001 0.001 0.01 0.1 1 10 100 1000 PULSE TIME (sec) Figure 13. Thermal Response DEVICE ORDERING INFORMATION Marking Package Shipping NTMFS5844NLT1G 5844NL DFN5 (Pb-Free) 1500 / Tape & Reel NVMFS5844NLT1G V5844L DFN5 (Pb-Free) 1500 / Tape & Reel NVMFS5844NLWFT1G 5844LW DFN5 (Pb-Free) 1500 / Tape & Reel NVMFS5844NLT3G V5844L DFN5 (Pb-Free) 5000 / Tape & Reel NVMFS5844NLWFT3G 5844LW DFN5 (Pb-Free) 5000 / Tape & Reel Device For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 5 NTMFS5844NL, NVMFS5844NL PACKAGE DIMENSIONS DFN5 5x6, 1.27P (SO-8FL) CASE 488AA ISSUE H 2X NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION D1 AND E1 DO NOT INCLUDE MOLD FLASH PROTRUSIONS OR GATE BURRS. 0.20 C D 2 A B D1 2X 0.20 C 4X E1 2 1 2 3 q E c A1 4 TOP VIEW C 3X e 0.10 C SOLDERING FOOTPRINT* SIDE VIEW 8X DETAIL A 3X 0.05 c 4X 1.270 b C A B SEATING PLANE DETAIL A A 0.10 C 0.10 DIM A A1 b c D D1 D2 E E1 E2 e G K L L1 M q 0.750 MILLIMETERS MIN NOM MAX 0.90 1.00 1.10 0.00 --- 0.05 0.33 0.41 0.51 0.23 0.28 0.33 5.15 BSC 4.70 4.90 5.10 3.80 4.00 4.20 6.15 BSC 5.70 5.90 6.10 3.45 3.65 3.85 1.27 BSC 0.51 0.61 0.71 1.20 1.35 1.50 0.51 0.61 0.71 0.05 0.17 0.20 3.00 3.40 3.80 0_ --- 12 _ STYLE 1: PIN 1. SOURCE 2. SOURCE 3. SOURCE 4. GATE 5. DRAIN 4X 6. DRAIN 1.000 e/2 L 1 0.965 4 1.330 K 2X 0.905 2X PIN 5 (EXPOSED PAD) G 0.495 E2 L1 M 4.530 3.200 0.475 D2 2X 1.530 BOTTOM VIEW 4.560 *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 http://onsemi.com 6 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NTMFS5844NL/D Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: ON Semiconductor: NVMFS5844NLT3G NVMFS5844NLT1G